Skip to content

2025-04

  1. Deng Yongjie, Li Nan, Zhong Jianjun, Liang Yun et al. (2025-04)
    Ultrafast-Setting Magnesium Phosphate Cement Prepared from Low-Burned Magnesium Oxide for Mixed Stirring Extrusion Function Integrated 3D Printing Applications
  2. Hashimoto Katsufumi, Nakase Kota, Yoshihara Rei, Honda Yoshiki et al. (2025-04)
    Evaluation and Investigation of Material and Mechanical Property of 3D Printed Concrete by Means of Non-Destructive Testing Methods
  3. Mishra Jyotirmoy, Babafemi Adewumi, Combrinck Riaan (2025-04)
    Limitations and Research Priorities in 3D-Printed Geopolymer Concrete:
    A Perspective Contribution
  4. Dabbaghisouraki Farshad, Tanhadoust Amin, Nehdi Moncef (2025-04)
    Fiber Reinforcement Strategies in 3D Concrete Printing:
    Addressing Challenges and Identifying Research Gaps
  5. Sun Yifan, Ma Siqi, Chen Qingze, Chen Guoliang et al. (2025-04)
    Lunar Regolith Simulant-Derived 3D-Printed Geopolymers with Optimized Mechanical and Thermal Management Properties
  6. Tanyildizi Harun, Seloglu Maksut, Bakri Abdullah Mohd, Razak Rafiza et al. (2025-04)
    The Rheological and Mechanical Properties of 3D-Printed Geopolymers:
    A Review
  7. Wu Changzhong, Zhu Xingyu, Wu Liang, An Haibo et al. (2025-04)
    Design and Simulation Analysis of the Extrusion Device of Concrete 3D Printing Device
  8. Zuo Zibo, Tao Yaxin, Huang Yulin, Zhang Longlong et al. (2025-04)
    Real-Time Temperature Monitoring to Evaluate the Strength Evolution of 3D Printed Concrete:
    From Lab to In-Situ Printing
  9. An Ning, Wang Huai, Wang Peijun, Xu Chuanhua et al. (2025-04)
    Tension-Compression Anisotropic Cohesion Model for the Interlayer Interface of 3D-Printed Concrete Compression Specimens
  10. Thajeel Marwah, Kopecskó Katalin, Balázs György (2025-04)
    Enhancing Printability of 3D Printed Concrete by Using Metakaolin and Silica Fume
  11. Xia Kailun, Chen Yuning, Chen Yu, Jia Lutao et al. (2025-04)
    Programmable Toughening for 3D Printed Concrete and Architected Cementitious Materials
  12. Casanova Euro, Hidalgo Nelson, Valdebenito Michael, Forcael Eric et al. (2025-04)
    Overturning Resistance of Concrete Curved Walls Manufactured with Additive Construction
  13. Dörrie Robin, Gantner Stefan, Amiri Fatemeh, Lachmayer Lukas et al. (2025-04)
    From Digital to Real:
    Optimised and Functionally Integrated Shotcrete 3D Printing Elements for Multi-Storey Structures
  14. Hasani Alireza, Besharatian Boshra, Dorafshan Sattar (2025-04)
    Additively Constructed Plain Concrete Pipes:
    Structural Performance and Site Implementation
  15. Hu Xiangcheng, Shazad Qamar, Li Fangyuan (2025-04)
    Influence of the Shear Span Ratio on the Shear Performance of 3D-Printed Concrete Beams Without Web Reinforcement
  16. Hua Hao, Liu Yizhuo, Hovestadt Ludger, He Siyuan et al. (2025-04)
    Digital Nervi:
    Performance‐based Design of Lightweight Isostatic Ribbed Slab with 3D Printed Concrete Formwork
  17. Qiao Zhigang, Li Hui, Wang Fei, Qi Yongle et al. (2025-04)
    Optimizing Thermal Energy Storage in 3D Printed Concrete with Hollow Ceramsite Composite Phase Change Materials
  18. Si Qi, Zhang Wenna, Pan Zhihong, Zheng Jianqiang et al. (2025-04)
    Study on the Mechanical and Durability Properties of 3D-Printed Bamboo Fiber-Reinforced Concrete
  19. Huang Jianxiang, Wang Caifeng, Jian Shouwei, Tan Hongbo et al. (2025-04)
    Feasibility of Applying Attapulgite, Sodium Bentonite and Nano-Silica as a Viscosity Modifier Admixture for 3D Printing of Gypsum-Based Materials
  20. Zhao Herui, Jiang Quan, Xia Yong, Hou Dongqi et al. (2025-04)
    Microbial-Induced Calcareous Precipitation Effect on Tensile Strength and Early Age Shrinkage of 3D Printed Concrete
  21. Campos Guilherme, Lunelli Pietro, Moraes Elisângela, Souza Marcelo et al. (2025-04)
    Optimization of Clay-Based Ceramic Mixtures with Sugarcane Bagasse Fiber for 3D Printing
  22. Gao Jianhao, Niu Yujun, Wang Chaofeng (2025-04)
    Linear Helical Printing:
    A Novel Approach to 3D Printing Concrete Structures with Enhanced Integrity
  23. Yue Hongzhe, Wang Qian, Zhao Zixuan, Lai Sha et al. (2025-04)
    Interactions Between BIM and Robotics:
    Towards Intelligent Construction Engineering and Management
  24. Zhang Qiuju, Li Yujia, Huang Yuefan, Li Yangbo et al. (2025-04)
    Utilizing 3D Printing and Distributed Optic Fiber to Achieve Temperature-Sensitive Concrete
  25. Cao Xiangpeng, Cui Hongzhi (2025-04)
    Simple Floor Nail Placement Technique to Reinforce 3D-Printed Concrete:
    An Experimental Investigation
  26. Shen Jianyu, Ye Taohua, Xiao Jianzhuang, Li Shuisheng (2025-04)
    Mechanical and Thermal Properties of 3D Printed Earth Concrete Solidified by Geopolymers:
    A Study of Utilizing Excavated Clay
  27. Berawi Mohammed, Sari Mustika, Bakri Helty, Miraj Perdana et al. (2025-04)
    3D Printing Technology for Precast Concrete:
    A Business Process Perspective from Indonesian Construction Sector
  28. Zhou Jimmy, Samarasinghe Don, Rotimi James, Feng Zhenan (2025-04)
    Examining Global Policy Influences on the Adoption of 3D Concrete Printing Technology:
    A Roadmap for New Zealand
  29. Beigh Mirza, Signorini Cesare, Rauf Asim, Schröfl Christof et al. (2025-04)
    Intrinsic Rheological Behavior of Limestone Calcined Clay Cementitious (LC3) Binders for Automated Construction:
    Effect of Calcium Sulfate Varieties
  30. Dobrzanski James, Xu Jie, Bartek Rasti, Becker Daniel et al. (2025-04)
    From Digital Crafting to Digital Manufacturing:
    Automated Production Using Hybrid 3D Concrete Printing
  31. Rudziewicz Magdalena, Hutyra Adam, Maroszek Marcin, Korniejenko Kinga et al. (2025-04)
    3D-Printed Lightweight Foamed Concrete with Dispersed Reinforcement
  32. Wang Chaofan, Li Bin, Chen Bing (2025-04)
    Enhancing Printability and Mechanical Performance of 3D Printed Magnesium Phosphate Cement Through Silica Fume Modification:
    Rheological, Microstructural, and Numerical Insights
  33. Xiong Baocheng, Liu Huanbao, Nie Ping, Li Xiaoxi et al. (2025-04)
    Effect of Different Surface Modification Methods of Small Particle Size Recycled Rubber Powder on Mechanical Properties of 3D Printed Concrete
  34. Jesus Manuel, Teixeira João, Guimarães Ana, Rangel Bárbara et al. (2025-04)
    From 3D Survey Data of Cultural Heritage Artifacts to 3D Printed Prototypes Based on Cement and Lime-Based Mortars
  35. Zhou Biao, Zhou Hongru, Yoshioka Hideki, Noguchi Takafumi et al. (2025-04)
    Mechanical and Microstructure Evolution of 3D Printed Concrete Interlayer at Elevated Temperatures
  36. Ayhan Bahar, Irizarry Elmer, Lale Erol, Yu Ke et al. (2025-04)
    Numerical Simulation of 3D Printed Ultra High-Performance Concrete Using the Lattice Discrete Particle Model
  37. Ghodke Swapnil, Chowdhury Shubhankar, Singh Bhupinder (2025-04)
    Characterising Flexural Behaviour of Coarse Aggregate-Based 3D Printed Concrete Beams Using Acoustic Emission Technique
  38. He Shan, Luković Mladena, Schlangen Erik (2025-04)
    Self-Healing Strain-Hardening Concrete Cover
  39. Kompella Sriram, Levi Marinella, Ferrara Liberato (2025-04)
    Identifying Interlayer Fracture Properties in 3D Printed Concrete Specimens via Multidirectional Flexural Tests
  40. Kunieda Minoru, To Shunya, Kato Tatsuyoshi, Miyajima Akira (2025-04)
    Failure Behavior of RC Beams by Means of 3D Concrete Printing
  41. Li Mo, Wu Yun-Chen, Wang Xinbo (2025-04)
    Fracture Behavior of Additively Manufactured Cementitious Materials
  42. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2025-04)
    Multiphysics Modelling for 3D Concrete Printing:
    From Printability to Hardened Properties
  43. Sørensen Jesper, Stang Henrik (2025-04)
    Experimental Investigation of the Fatigue Behavior of 3D Printed Steel Fiber Reinforced Concrete
  44. Teng Fei, Ye Junhong, Yu Jie, Weng Yiwei (2025-04)
    Multi-Material Printing to Simultaneously Enhance Interlayer and Flexural Performance in 3D Concrete Printing
  45. Jia Lutao, Dong Enlai, Xia Kailun, Niu Geng et al. (2025-04)
    Initial Plastic Shrinkage of 3D-Printed Concrete Incorporating Recycled Brick Fine Aggregates:
    Insights from Water Transport and Structural Evolution
  46. Salaimanimagudam M., Jayaprakash Jaganathan (2025-04)
    Synergistic Potential of Topology Optimization and Lattice Structures in Concrete 3D Printed Beams
  47. Temirzakuly Bakbergen, Nurgaliuly Dias, Kim J., Shehab Essam et al. (2025-04)
    Development of Cost-Effective Geopolymer Mortars from Low-Grade Metakaolin and Bottom Ash for 3D Construction Printing
  48. Cavalcante Tiago, Toledo Filho Romildo, Mendoza Reales Oscar (2025-04)
    Rheological and Environmental Implications of Recycled Concrete Powder as Filler in Concrete 3D Printing
  49. Liu Junli, Hai Hoang, Tran Mien, Tran Jonathan (2025-04)
    Advancing Microstructural Insights in 3D-Printed Cementitious Materials via X-Ray Micro-Computed Tomography
  50. Thomsen Mette, Nicholas Paul, Chiujdea Ruxandra-Stefania, Nielsen Stine et al. (2025-04)
    Additive Manufacturing for Repair:
    Continual Construction Through Bio-Based Materials
  51. Over Derya, Ozbakan Nesil (2025-04)
    Effect of Recycled Aggregate Use on the Fresh State Properties of Limestone Calcined Clay Cement (LC3) Mortars
  52. Salaimanimagudam M., Jayaprakash Jaganathan (2025-04)
    Effect of Nozzle Stand-Off Distance, Printing Interval, and Inclusion of Glass Fiber Mesh Reinforcement in 3D Printed Concrete
  53. Ali Shah Syed, Zhang Shipeng, Xuan Dongxing, Poon Chi (2025-04)
    Development of a Novel Mixing Strategy for Set-on-Demand Printing of One-Part Geopolymer Using Municipal Solid Waste Incineration Bottom Ash and Blast Furnace Slag
  54. Noaimat Yazeed, Chougan Mehdi, Seidy Eslam, Albar Abdulrahman et al. (2025-04)
    Optimizing Limestone Calcined Clay Cement for Enhanced 3D Printing Performance of Low-Carbon Materials
  55. Liu Qiong, Wang Qiming, Sun Chang, Singh Amardeep et al. (2025-04)
    Compressive Performance and Damage Evolution of Concrete Short Columns with Shell-Filling Structure Confined by Continuous Fiber Reinforced 3D Printed Mortar
  56. Maralapalle Vedprakash, Kumavat Hemraj, Nadaf Maheboobsab, Zende Aijaz et al. (2025-04)
    Optimizing 3D Geopolymer Concrete for Sustainable Construction:
    A Review of Material Selection, Printing Methods, and Properties
  57. Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi (2025-04)
    Novel Strategy for Enhancing Rheological Properties and Interlayer Bonding in Underwater 3D Concrete Printing
  58. Liu Chuanbei, Zou Mengtong, Chen Xuemei, Deng Yongjun et al. (2025-04)
    Feasibility Study of 3D-Printed Rubberized Concrete as a Permanent Formwork:
    Mechanical Properties, Interlayer Interface and Durability
  59. Zhu Jinggao, Cervera Miguel, Ren Xiaodan (2025-04)
    Peridynamic Anisotropic Behavior Analysis of 3D-Printed Concrete Structures
  60. Benros Deborah, Hashemi Arman, Yunsheng Su, Callaghan Carl (2025-04)
    Robotic Micro-House:
    Experience with 3D Concrete Printing for Housing Construction
  61. Lin Yuxin, Bayramvand Alireza, Meibodi Mania (2025-04)
    Towards Lightweight Structure:
    Coupling Topology Optimization with Non-Planar 3D Concrete Printing
  62. Shi Ye, Han Li, Wu Pengtao, Dai Kaichao et al. (2025-04)
    Design of 3D Printing Green Ultra-High Performance Concrete Based on Binder System Optimization
  63. Yassin Ahmed, Hafez Mohamed, Aboelhassan Mohamed (2025-04)
    Experimental and Numerical Investigation on the Effect of Different Types of Synthetic Fibers on the Flexure Behavior and Mechanical Properties of 3D Cementitious Composite Printing Provided with Cement CEM II/A-P
  64. Cho Eunsan, Gwon Seongwoo, Cha Soowon, Shin Myoungsu (2025-04)
    Impact of Accelerator on Rheological Properties of Cement Composites with Cellulose Microfibers:
    3D Printing Perspective
  65. Kurniati Eka, Kim Heejeong (2025-04)
    Enhancing the Printability of 3D Printing Limestone Calcined Clay Cement Using Hydroxyethyl Cellulose Admixture and Silica Fume
  66. Aman Abdulkerim, Yang Zhe, Xin Yubo, Zhang Xiaoman et al. (2025-04)
    Introducing Magnesium Oxide into 3D Printed Concrete to Mitigate Dry-Shrinkage
  67. Pederson Federico, Ellersick Liam, Kim Heejeong (2025-04)
    A Review of Lunar Regolith Based Alkali Activated Materials and Sintered Regolith for Use as a Construction Material
  68. Zhang Ziqi, Pan Tinghong, Guoa Rongxin, Lin Runsheng et al. (2025-04)
    Simulation and Analysis of Material Stacking and Migration Induced by Extrusion Behavior in 3D Printed Concrete
  69. Zhang Yuying, Zhu Xiaohong, Li Muduo, Zhang Chao et al. (2025-04)
    3D Printing Technology in Concrete Construction
  70. İlcan Hüseyin, Külak Adnan, Şahin Oğuzhan, Aldemir Alper et al. (2025-04)
    Reinforcement and Modular System for 3DCP Geopolymer Structures Using Construction and Demolition Waste
  71. Liu Xiongfei, Yang Xiaojie, Sun Yuhang (2025-04)
    Synchronous Construction of Spray-Based 3D Printed Reinforced Concrete Structure:
    Effect of 2.5D Rebar Structure on the Flexural Performance of Slab
  72. Ravichandran Darssni, Prem Prabhat, Giridhar Greeshma, Bhaskara Gollapalli et al. (2025-04)
    Time-Dependent Properties of 3D-Printed UHPC with Silica Sand, Copper Slag, and Fibers
  73. Tseng Kuo-Chang, Chi Maochieh, Yeih Weichung, Huang Ran (2025-04)
    Influence of Slag/Fly Ash as Partial Cement Replacement on Printability and Mechanical Properties of 3D-Printed Concrete