#cement¶

Keywords by Co - Occurrence¶

#print (610) #material (296) #composite (286) #base (220) #property (184)

1. Nguyen Vuong, Jie Cheah, Lao Junying, Huanyu Zhao et al. (2026-01)
   Performance of Lightweight, Reinforced, and Assemblable 3D-Printed Concrete Columns with Low-Carbon Engineered Cementitious Composites
2. Federowicz Karol, Sibera Daniel, Tošić Nikola, Zieliński Adam et al. (2026-01)
   Early-Age Shrinkage Monitoring of 3D-Printed Cementitious Mixtures: Comparison of Measuring Techniques and Low-Cost Alternatives
3. Teixeira João, Jesus Manuel, Rangel Bárbara, Alves Jorge et al. (2026-01)
   Evaluation of Printing Performance of Cementitious Pastes with Alternative Powders
4. Costa Gabriel, Maas Pyetra, Doerner Gabriel, Nazário Samara et al. (2026-01)
   Reducing the Cement Content in 3D Concrete Printing Mixtures Through Porcelain Polishing Residue Incorporation
5. Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2026-01)
   Enhancing Fiber Alignment and Tensile Properties of 3D-Printed Ultra-High Performance Strain-Hardening Cementitious Composites by Nozzle Channel Design
6. Aroso Francisca, Reis Rui, Brandão Filipe, Figueiredo Bruno et al. (2026-01)
   Assessing Orthotropic Mechanical Performance and Digital Twin of Robotic 3D Printed Cementitious Mortars with Fibers and Metal Reinforcements
7. Reis Rui, Aroso Francisca, Brandão Filipe, Camões Aires et al. (2026-01)
   A Systematic Review on the Durability of 3D-Printed Cementitious Materials:
   Insights and Research Challenges
8. Tinoco Matheus, Márquez Álvaro, Ramallo Laura, Barluenga Gonzalo et al. (2026-01)
   Effect of Cellulose Microfibers on Rheological Properties and Printability of 3D Printable Cement-Based Composites
9. Rodriguez Fabian, Vugteveen Caiden, Fross Xavier, Wei Hui et al. (2025-12)
   3D Printing of Cement-Based Materials Using Seawater for Simulated Marine Environments
10. Ferrari Lucia, Rizzieri Giacomo, Ferrara Liberato, Franzoni Elisa (2025-12)
    Rheological Control of Cementitious Composites Incorporating Ceramic Wastes for 3D Printing Applications
11. Hurtig Karel, Čítek David, Holý Milan, Koteš Peter et al. (2025-12)
    Experimental Assessment of Durability in 3D Printed Cementitious Materials
12. Cao Jing, Yang Xiaojie, Shi Yaming, Yang Yi et al. (2025-12)
    Numerical Analysis of Mechanical Properties of Steel Fiber Composite Cement Mortar Considering Non-Uniformity in 3D Printing.
13. Cheng Jianhua, Chen Meng, Ge Yulin, Zhang Tong (2025-12)
    Mechanical Behavior and Damage Evolution of 3D-Printed Engineered Cementitious Composites at Elevated Temperatures:
    Insights from Acoustic Emission Characterization
14. Tinoco Matheus, Lima Moura Paiva Rayane, Andrade Luiza, Mendoza Reales Oscar (2025-12)
    Hybrid 3D Printable Mixtures Incorporating Fine Earth, Portland Cement, and Fly Ash:
    A Sustainable Alternative to Cement-Intensive Systems
15. Xu Fengming, Yu Jie, Teng Fei, Lin Xiaoshan et al. (2025-12)
    Application of Recycled Tile as Internal Curing Material in 3D-Printed Engineered Cementitious Composites
16. Cheng Zhangqi, Li Keyan, Liu Renlong (2025-12)
    Sustainable 3D Printed Engineered Cementitious Composites Incorporating Recycled Ceramic Materials:
    Rheology and Mechanical Behavior
17. Liu Xuelin, Kong Jiafeng, Chen Yidong, Wang Liang et al. (2025-12)
    Rheology and Printability Control of Low-Carbon 3D-Printed Cementitious Materials via Circular Use of Recycled Concrete Powder
18. Öztürk Ece, Ince Ceren, Borgianni Yuri, Nicolaides Demetris et al. (2025-12)
    Printability, Engineering Properties and Environmental Implications of 3D-Printed Cementitious Mortars Incorporating Hydrated Lime, Tile Powder and Accelerator
19. Feng Xiaowei, Carvelli Valter, Pan Dongjiang, Zhu Chuankai et al. (2025-12)
    Additive Manufacturing of Hybrid Straw-Soil-Cement Materials for Enhanced Mine Models
20. Cai Xianhuan, Chen Fan, Zhao Zhihui, Xiao Peng et al. (2025-12)
    Impact of Early Particle Characteristics on Rheology and Buildability in 3D-Printed Magnesium Silicon Potassium Phosphate Cement Incorporating Fly Ash
21. Alnaggar Mohammed (2025-12)
    Large Format Additive Manufacturing with Cementitious and Geo Materials:
    General Considerations, Drivers, and Context
22. Teixeira João, Jesus Manuel, Ribeiro Elis, Rangel Bárbara et al. (2025-12)
    Large Format Additive Manufacturing with Cement and Clay Applications
23. Guerrero Ana, Asensio Eloy, Fernández Fernando (2025-12)
    Large‐Format Additive Manufacturing with Cement and Clays:
    Characterization Methods
24. Ramezani Mahyar, Kilic Ugur, Sherif Muhammad, Arce Gabriel et al. (2025-12)
    Rheological Properties and Mechanical Response of Bio-Based Graphene Enhanced Additively Manufactured Cementitious Composites
25. Luo Xiaoyu, Zhao Yuqi, Yang Min, Yao Xiaofei et al. (2025-12)
    Introducing Cement Composite Agents During Printing Process to Enhance the 3D-Printed Concrete Interfaces Between Layers and Filaments
26. Feng Hu, Yuan Xiang, Yu Zhenyu, Guo Aofei et al. (2025-12)
    Printability and Rheological Properties of 3D Printing Ultra-High Ductility Magnesium Phosphate Cement-Based Composites
27. Saravanan Pradeep, Ramaswamy Ananth (2025-11)
    Modelling Buildability Performance of 3D Printable Cementitious Materials Using Chemo-Mechanical Model
28. Solaiappan Kamesh, Foruzanmehr M. (2025-11)
    A Rheological Test Method for Determining the Printability Zone of Cementitious 3D Printers
29. Tulliani Jean-Marc (2025-11)
    Latest Developments in 3D-Printed Engineered Cementitious Composites:
    Technologies, Prospects, and Challenges
30. Bawab Jad, Dieb Amr, Hassan Hilal (2025-11)
    Preliminary Investigation into the Development of Cement-Free Composites Using Emerging Alternatives for 3D Printing
31. Raza Ali, Tan Binglin, Jiajia Zhou, Umar Muhammad et al. (2025-11)
    Evaluation of Mechanical and Microstructural Properties of Sustainable 3D-Printed Engineered Cementitious Composites Incorporating Hybrid PE/PVA Fibers and Yellow River Sand
32. Tang Can, Zhou Yujie, Mehmood Awais, Rania Chlihi et al. (2025-11)
    A Novel 3D-Printed Negative Poisson's Ratio Grid-Reinforced Cement-Based Composite Wall Structure:
    Design, Fabrication, and Compressive Properties
33. Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-11)
    Multi-Scale Analysis of 3D Printable High-Strength Engineered Cementitious Composite with Carbon and Polyethylene Fibers:
    Rheology, Printability and Hydration Kinetics in Structural Components
34. Li Shiping, Sun Yan, Qian Ye, Chen Wujun et al. (2025-11)
    Bio-Inspired Jigsaw-Interlocking Suture Interfaces for Enhanced Flexural Response of 3D-Printed Strain-Hardening Cementitious Composites
35. Sun Yan, Du Guoqiang, Mudasir Maryam (2025-11)
    Rheological Investigations of Fresh Fiber-Reinforced Cementitious Composites Using Hydrophobic / Hydrophilic UHMWPE Fibers for 3D Concrete Printing Evaluation
36. Diggs-McGee Brandy, Samouh Hamza, Garg Nishant (2025-11)
    Predicting Cementitious Set Times via Infrared Thermography:
    Potential Implications on Real-Time Quality Control During 3D Concrete Printing
37. Flor Juncal Luis, Scott Allan, Clucas Don, Loporcaro Giuseppe (2025-11)
    Influence of Alternative Supplementary Cementitious Materials and Printing Parameters on the Mechanical Properties of 3D-Printed Mortars
38. Chen Wenguang, Yu Jie, Ye Junhong, Yu Jiangtao et al. (2025-11)
    3D Printed High-Performance Fiber-Reinforced Cementitious Composites:
    Fresh, Mechanical, and Microstructural Properties
39. Li Yeou-Fong, Lin Chih-Chieh, Syu Jin-Yuan, Huang Chih-Hong et al. (2025-10)
    Enhancing 3D-Printed Cement Mortar with Recycled PCB Glass Fibers:
    Printability, Mechanical Strength, and FEM-Based Structural Assessment
40. Matos Ana, Milheiro-Oliveira Paula, Pinto Nuno, Pimentel Mário (2025-10)
    Cementitious Mortars for Sustainable 3D Printing
41. Liu Renlong, Cheng Zhangqi (2025-10)
    Interlayer Fracture Properties of 3D-Printed Cement-Based Structures:
    Influencing Factors and Mechanisms
42. Zhang Yi, Lima Lucas, Böhler David, Arunothayan Arun et al. (2025-10)
    Durability Assessment of 3D Printed Cement-Based Materials:
    A RILEM TC 304-ADC Interlaboratory Study
43. Liu Junli, Zhang Shipeng, Hao Lucen, Wu Bo et al. (2025-10)
    Rapid Rheology Control and Stiffening of 3D-Printed Cement Mortar via CO2 Flash Mixing in a 2K Printing System
44. Jamifar Vahid, Eskandari‐Naddaf Hamid, Dehestani Mehdi (2025-10)
    Optimizing Electric Arc Furnace Dust Utilization in 3D Printed Reinforced Cement Paste Using D‐Optimal Design of Experiments and Gray Wolf Optimization
45. Cheng Zhangqi, Zhou Lu, Jia Xiangxi, Liu Renlong (2025-10)
    Experimental Study on Crack Development and Fracture Performance of 3D Printed Green Engineered Cementitious Composites
46. Gajjar Parth, Gajjar T., Tangirala Aniruddha, Shrestha Ajad (2025-10)
    Advancing 3D Printing in Construction:
    Rheological Behaviors of Cementitious Composites with Supplementary Materials
47. Wang Yuting, Chen Meng, Zhang Tong, Zhang Mingzhong (2025-10)
    Influence of Limestone Calcined Clay on the Mechanical Behaviour of 3D Printed Engineered Cementitious Composites
48. Ball Richard, Dams Barrie, Shepherd Paul, Chen Binling (2025-10)
    Exploring Aerial Additive Manufacturing with Cementitious Materials Using Autonomous Drones
49. Raza Ali, Yuan Chengfang (2025-10)
    Degradation Mechanisms and Microstructural Performance of 3D-Printed Engineered Cementitious Composites with Yellow River Sand Under Chloride Ion Wet-Dry Cycles
50. Teng Fei, Yang Minxin, Yu Jie, Weng Yiwei et al. (2025-10)
    Multi-Material 3D Concrete Printing:
    Automated Hybrid Reinforcements Using Textile and Strain-Hardening Cementitious Composites
51. Delavar Mohammad, Aslani Farhad, Sercombe Tim (2025-10)
    Cracking Behaviour in 3D Concrete Printed Fiber-Reinforced Cementitious Composites:
    A Review
52. Biernacki Joseph (2025-10)
    Sustainability of Additively Manufactured Cement-Based Housing:
    What's Our Next Move?
53. Lange David, Shen Chuanyue (2025-10)
    Modeling the Fresh Properties of Cement-Based Materials for 3D Concrete Printing
54. Kamakshi Tippabhotla, Chau Bao, Tugelbayev Aidyn, McCoy Andrew et al. (2025-10)
    Developing 3D Printable Concrete Using Quarry by-Products as Partial Replacement for Cement
55. Li Haodao, Khayat Kamal (2025-10)
    Performance-Based Design of 3D Printable Cement Composite Using Locally Available Materials
56. Rahman Mahfuzur, An Dong, Rawat Sanket, Yang Richard et al. (2025-09)
    Development of Green 3D Printable Cementitious Composites Using Multi-Response Optimisation Method
57. Liu Han, Sousa Israel, Laflamme Simon, Doyle Shelby et al. (2025-09)
    Embedment of 3D Printed Self-Sensing Composites for Smart Cementitious Components
58. Zhang Junyi, Zhang Chao, Zhang Yuying, Li Muduo et al. (2025-09)
    Designing Printable Cement Composites with Porous Biochar Using an Extended Water Film Thickness Theory
59. Sun Yan, Mudasir Maryam (2025-09)
    3D Printing Performance of Strain-Hardening Cementitious Composites with Different UHMWPE Fibers in Correlation with Rheology
60. Liu Renlong, Tang Jiyu, Feng Hu, Cheng Zhangqi (2025-09)
    Study on the Instability of Early Age 3D Printing Cement-Based Structure:
    Considering the Influence of Interface
61. Jesus Manuel, Dias Ricardo, Teixeira João, Delgado João et al. (2025-09)
    Optimisation of 3D Printable Cement- and Lime-Based Mortars for Built Heritage Rehabilitation
62. Fahim Abdullah, Bukhari Syed, Khanzadeh Moradllo Mehdi (2025-09)
    Additive Manufacturing of Carbonatable Ternary Cementitious Systems with Cellulose Nanocrystals
63. Zhang Yi, Ren Qiang, Tittelboom Kim, Schutter Geert et al. (2025-09)
    Layer Interface in 3D Printed Cement-Based Materials:
    Heterogeneous Phase Distribution and New Insights into Formation Mechanism
64. Nasr Ahmed, Wang Jiyuan, Duan Zhenhua, Deng Qi et al. (2025-09)
    Assessing the Visibility and Impact of Recycled High-Density Polyethylene Fibers in 3D-Printed Cementitious Composites
65. Kua Harn, Shi A., Kajandran V., Lam T. et al. (2025-09)
    Toward Sustainable Construction 3D Printing:
    Limestone and Non-Calcined Recycled Marine Clay as Partial Cement Replacement
66. Kim Ki-Yeol, Lim Dong-Kyu, Choi Myoungsung (2025-09)
    Comparison of Pumping Mechanism for Various Cementitious Materials
67. Du Guoqiang, Deng Xiaowei, Qian Ye (2025-09)
    Biomimetic 3D Printed Herringbone-Bouligand Cementitious Composites for Ultra-High Impact Performance
68. Chen Wenguang, Liang Long, Ye Junhong, Liu Lingfei et al. (2025-09)
    Machine Learning-Enabled Performance-Based Design of Three-Dimensional Printed Engineered Cementitious Composites
69. Márquez Álvaro, Varela Hugo, Barluenga Gonzalo (2025-09)
    Influence of Rheology Modifying Admixtures on the Buildability of 3D Printing Cement-Based Mortars
70. Safanelli Nicollas, Schackow Adilson, Effting Carmeane, Matos Paulo (2025-09)
    The Effect of Crystalline Nanocellulose on the Rheology, Hydration of Cement Pastes, and Buildability of 3D-Printed Concrete
71. Jankovský Ondřej, Lodňánek Petr, Lauermannová Anna-Marie, Jiříčková Adéla et al. (2025-08)
    Use of Ladle Furnace Slag as Filler Replacement in Magnesium Oxychloride Cement:
    Towards Sustainable 3D-Printable Building Composites
72. Lyu Libo, Li Weihong, Deng Yongjie, Yu Qiuchun et al. (2025-08)
    Engineering Properties of Magnesium Phosphate Cement Lunar Soil Concrete Under Vacuum Conditions and Its 3D Printing Application for Lunar Dome Model
73. Zhang Yifan, Aslani Farhad (2025-08)
    Mechanical and Ultrasonic Pulse Velocity Performance of 3D Printed Rubberised Cementitious Composites Reinforced with PVA Fibers
74. Wang Cheinfei, Lian Junyin, Fang Yunhui, Fan Guangming et al. (2025-08)
    Rheological Optimization of 3D-Printed Cementitious Materials Using Response Surface Methodology
75. Wang Chaofan, Chen Bing, Wang Yong, Vo Thanh et al. (2025-08)
    Influencing Mechanism of Magnesium-to-Phosphate Ratio on the Rheology and Microstructure Development of 3D-Printed Magnesium Phosphate Cement at Early Hydration
76. Li Shiping, Sun Yan, Qian Ye, Chen Wujun et al. (2025-08)
    Bio-Inspired Bouligand Architectures for Enhanced Flexural Performance in 3D-Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
77. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa (2025-08)
    Transformative Low-Carbon 3D-Printed Infrastructure:
    Machine Learning-Driven Self-Sensing and Self-Heating Limestone Calcined Clay Cement (LC3) Composites
78. Disu Oluwatimilehin, Ismail Sikiru, Wood Luke, Chrysanthou Andreas et al. (2025-08)
    Experimental Study on Buildability of 3D-Printed Cement-Based Structures Using Aluminium Sulphate
79. Liu Zhixin, Si Liang, Liu Yebao, Li Mingyang et al. (2025-08)
    Optimization of Printing Parameters Based on Computational Fluid Dynamics for Uniform Filament Mass Distribution at Corners in 3D Cementitious Material Printing
80. Sapata Alise, Pluminss Ernests, Šlosbergs Pēteris, Šinka Māris (2025-08)
    Utilizing Construction Demolition Waste Aggregates in Cement- Free Concrete for 3D Printing
81. Yang Xia, Wang Jiuyuan, Huang Han, Wu Gengchen et al. (2025-08)
    Anti-Washout Cement-Based Material for Under-Seawater 3D Concrete Printing:
    Design, Mechanical Properties and Microstructural Analysis
82. Medeiros Fernanda, Anjos Marcos, Maia José, Dias Leonardo et al. (2025-08)
    Effect of Sisal Fibers on the Behavior of 3D-Printed Cementitious Mixtures Exposed to High Temperatures
83. Khan Hilal, Zahid Zamil, Hussain Fazal, Ahmad Junaid et al. (2025-08)
    Sustainable Multifunctional Biochar-Based Cementitious Composites for Carbon Sequestration, Energy Storage, and Smart Infrastructure Applications:
    A Review
84. Li Nan, Deng Yongjie, Li Weihong, Li Lingyu et al. (2025-08)
    Performance of Active-Magnesia-Based Magnesium Phosphate Cement and Application of Rapid-Solidification 3D Printing Technology
85. Wagner Gabriel, Silva João, Ribeiro João, Figueiredo Bruno et al. (2025-08)
    A Novel and Flexible Approach to Modeling the Additive Manufacturing Extrusion of Cementitious Materials
86. Siqueira Neto Luiz, Isgor Burkan, Weiss William (2025-08)
    Modeling Fluid Absorption in Layered Anisotropic Cement-Based Materials
87. Vico Lujano Raúl, Pérez Villarejo Luis, Novais Rui, Hidalgo-Torrano Pilar et al. (2025-07)
    Optimized Mortar Formulations for 3D Printing:
    A Rheological Study of Cementitious Pastes Incorporating Potassium-Rich Biomass Fly Ash Wastes
88. Amdouni Marwen, Nasraoui Helmi, Rezgui Mohamed, Trabelsi Ali (2025-07)
    Use of the RDPP-SF Method to Analyze Rheology Variation in an AM-Cement-Based Process
89. Jin Yuan, Jiang Chengzhi, Gan Xingyu, Sun Zhaoyang et al. (2025-07)
    Enhancing the Printability of 3D Printed White Cementitious Materials with Accelerators:
    Evolution of Early-Age Hydration and Rheology
90. Lu Chenyu, Sun Dongpu, Shen Qiang, Zhang Zhigang et al. (2025-07)
    Buildability of 3D Printing Engineered Cementitious Composites (ECC):
    A Comprehensive Assessment Framework Under Laboratory Conditions
91. Zafar Tayyab, Zafar Muhammad, Hojati Maryam (2025-07)
    Exploring the 3D Printability of Engineered Cementitious Composites with Internal Curing for Resilient Construction in Arid Regions
92. Zafar Muhammad, Javadnejad Farid, Hojati Maryam (2025-07)
    Optimizing Rheological Properties of 3D Printed Cementitious Materials via Ensemble Machine Learning
93. Kellnerová Vendula, David Tomáš, Reiterman Pavel (2025-07)
    Modification of Properties of Fresh Mixture for 3D Printing Using Cement-Based Mortar
94. Harbouz Ilhame, Yahia Ammar, Rozière Emmanuel, Loukili Ahmed (2025-07)
    Squeeze Test:
    A Toolkit for Assessing the Printability of Stiff Cement-Based Materials.
95. Liu Qiang, Zhang Xinwei, Jiang Quan, Xia Yong et al. (2025-07)
    Effects of Nano-Al2O3, Nano-MgO and Nano-Fe2O3 on the Properties of Cement-Based 3D Printing:
    A Comparative Study
96. Shi Ye, You Ge, Wu Pengtao, Liu Zhongxian et al. (2025-07)
    Effect of Water Film and Paste Film Thicknesses on Printability of 3D Printed Low Cement UHPC
97. Li Qiyan, Su Anshuang, Gao Xiaojian (2025-06)
    Improvement of Interlayer Performance of 3D Printable Magnesium Oxysulfate Cement-Based Materials by Carbonation Curing
98. Nandurkar Bhupesh, Raut Jayant, Hinge Pawan, Bahoria Boskey et al. (2025-06)
    Multi-Scale Deep Learning Framework for Three Dimensional Printed Self-Sensing Cementitious Composites with Hybrid Nano-Carbon Fillers
99. Rousan Rajai, Alnemrawi Bara'a, Abdalla Khairedin, Alhassan Mohammad et al. (2025-06)
    The Flexural Behavior of Engineered Cementitious Composites (ECC) One-Way 3D Printed Slabs Made of Solid and Hollow Sections
100. Srinivas Dodda, Panda Biranchi, Suraneni Prannoy, Sitharam Thallak (2025-06)
     Mix Design Optimization of 3D-Printed Cementitious Composites for Marine Applications:
     Impact of Binder Composition, Accelerated Carbonation, and PVA Fibers on Strength and Durability
101. Liu Shun, Yang Xiaobin, Wu Jianing (2025-06)
     Damage Evolution Analysis of Cement-Based 3D Printing Similar Materials Under Different Cyclic Loading-Unloading Conditions
102. Mishra Sanjeet, Upadhyay Bikash, Das Bibhuti (2025-06)
     3D Printing Aspects of Fly Ash and GGBS Admixed Binary and Ternary Blended Cementitious Mortar
103. Noaimat Yazeed, Chougan Mehdi, Sambucci Matteo, Valente Marco et al. (2025-06)
     Optimising Limestone Calcined Clay Cement Containing Excavated Low-Grade Waste Clay for 3D Printing Applications
104. Jacquet Yohan, Kawashima Shiho, Spangenberg Jon (2025-06)
     Unveiling the Structural Build-up 3D Printable Cement-Based Materials:
     From Small Amplitude Oscillatory Shear (SAOS) To Extensional (SAOE) Rheological Workflows
105. Gomez Jaramillo Laura, Luković Mladena, Šavija Branko, Zhou Wen (2025-06)
     Recycled Sand for 3D-Printed Strain Hardening Cementitious Composite:
     A Review of Recent Developments
106. Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2025-06)
     Effects of Nozzle Thickness on the Mechanical Properties of 3D Printable Ultra-High Performance Strain-Hardening Cementitious Composites (UHP-SHCC)
107. Ye Huzi, He Qianpeng, Ping Pengxin, Pan Jinlong et al. (2025-06)
     Anisotropic Flexural Behavior and Energy Absorption of 3D Printed Engineered Cementitious Composites (3DP-ECC) Beams Under Low-Velocity Impact
108. Senf Ferdinand, Javed Rezan, Funke Henrik, Gelbrich Sandra (2025-06)
     Enhanced Environmental Sustainability of 3D-Printed Concrete Mixtures Based on Calcium Sulfoaluminate (CSA) and Blast Furnace Cement (CEM III/B)
109. Li Shuai, Liu Junli, Cheng Chi-Tsun, Xuan Hung et al. (2025-06)
     Design and Performance of 3D Printed Bouligand Steel Fiber-Reinforced Cementitious Composite Curved Beams
110. Dai Pengfei, Luo Zhenhua, Wang Yalun, Mbabazi Justin et al. (2025-06)
     Waste Plastic Fiber Reinforced Cementitious Cavity Structures Manufactured by Mortar Extrusion 3D Printing
111. Su Yanli, Wu Chang, Shang Jiaqi, Zhang Pu (2025-06)
     Mechanical Properties of 3D-Printed High-Ductility Cementitious Composite with Sulphoaluminate Cement and Modified Crumb Rubber
112. Chen Meng, Sun Hao, Wang Yuting, Zhang Tong (2025-05)
     Relationship Between Interfacial Pore Structure and Anisotropic Dynamic Splitting Behaviour of 3D Printed Engineered Cementitious Composites
113. Nieświec Martyna, Chajec Adrian, Šavija Branko (2025-05)
     Effect of Ground Copper Slag on the Fresh Properties of 3d Printed Cementitious Composites
114. Raza Ali, Junjie Zhang, Fan Jiahui, Umar Muhammad et al. (2025-05)
     Comprehensive Study on the Microstructural and Mechanical Performance of 3D-Printed Engineered Cementitious Composites with Yellow River Sand Integration
115. Cai Lixiong, Chen Feida, Xie Dingkun, Ye Keming (2025-05)
     Time-Varying Work Performance of Cementitious 3D Printing Mortar:
     Effect of SAC, H-PC and HPMC
116. Hiremath Shivashankarayya, Mathapati Gururaj, Chiniwar Dundesh, Vishwanatha H. (2025-05)
     Performance Evaluation of Cementitious Composites by Designing an Extrusion System for Construction 3D Printing
117. Irshidat Mohammad, Albeitjali Naeem, Amjad Umar, Alnuaimi Hamad et al. (2025-05)
     From Waste to Strength:
     Recycled Steel Fibers for Sustainable 3D Printing of Cementitious Composites
118. Salifu N., Bassuoni Mohamed, Guven Gursans (2025-05)
     Performance Evaluation of Limestone-Blended Cement and Cellulose Nanomaterials in 3D Concrete Printing
119. Lopes Sousa Israel, Liu Han, Alessandro Antonella, Laflamme Simon et al. (2025-05)
     Piezoresistive Performance of 3D Printed Cementitious Composites Doped with Carbon Microfibers
120. Demirbaş Ali, Tuğluca Merve, Şahin Oğuzhan, İlcan Hüseyin et al. (2025-05)
     A Comprehensive Study on the Valorization of Recycled Concrete Aggregates in 3D-Printable Cementitious Systems
121. Zahabizadeh Behzad, Pereira João, Pereira Eduardo, Cunha Vítor (2025-05)
     Self-Healing Assessment of Fiber Reinforced Cementitious Mortars Developed for 3D Concrete Printing:
     Recovery of Mechanical Performance and Self-Sealing Capability
122. Kaya Ebru, Ciza Baraka, Yalçınkaya Çağlar, Felekoğlu Burak et al. (2025-05)
     A Comparative Study on the Effectiveness of Fly Ash and Blast Furnace Slag as Partial Cement Substitution in 3D Printable Concrete
123. Deng Yongjie, Li Nan, Zhong Jianjun, Liang Yun et al. (2025-04)
     Ultrafast-Setting Magnesium Phosphate Cement Prepared from Low-Burned Magnesium Oxide for Mixed Stirring Extrusion Function Integrated 3D Printing Applications
124. Xia Kailun, Chen Yuning, Chen Yu, Jia Lutao et al. (2025-04)
     Programmable Toughening for 3D Printed Concrete and Architected Cementitious Materials
125. Wang Chaofan, Li Bin, Chen Bing (2025-04)
     Enhancing Printability and Mechanical Performance of 3D Printed Magnesium Phosphate Cement Through Silica Fume Modification:
     Rheological, Microstructural, and Numerical Insights
126. Beigh Mirza, Signorini Cesare, Rauf Asim, Schröfl Christof et al. (2025-04)
     Intrinsic Rheological Behavior of Limestone Calcined Clay Cementitious (LC3) Binders for Automated Construction:
     Effect of Calcium Sulfate Varieties
127. Jesus Manuel, Teixeira João, Guimarães Ana, Rangel Bárbara et al. (2025-04)
     From 3D Survey Data of Cultural Heritage Artifacts to 3D Printed Prototypes Based on Cement and Lime-Based Mortars
128. Li Mo, Wu Yun-Chen, Wang Xinbo (2025-04)
     Fracture Behavior of Additively Manufactured Cementitious Materials
129. Liu Junli, Hai Hoang, Tran Mien, Tran Jonathan (2025-04)
     Advancing Microstructural Insights in 3D-Printed Cementitious Materials via X-Ray Micro-Computed Tomography
130. Over Derya, Ozbakan Nesil (2025-04)
     Effect of Recycled Aggregate Use on the Fresh State Properties of Limestone Calcined Clay Cement (LC3) Mortars
131. Noaimat Yazeed, Chougan Mehdi, Seidy Eslam, Albar Abdulrahman et al. (2025-04)
     Optimizing Limestone Calcined Clay Cement for Enhanced 3D Printing Performance of Low-Carbon Materials
132. Yassin Ahmed, Hafez Mohamed, Aboelhassan Mohamed (2025-04)
     Experimental and Numerical Investigation on the Effect of Different Types of Synthetic Fibers on the Flexure Behavior and Mechanical Properties of 3D Cementitious Composite Printing Provided with Cement CEM II/A-P
133. Kurniati Eka, Kim Heejeong (2025-04)
     Enhancing the Printability of 3D Printing Limestone Calcined Clay Cement Using Hydroxyethyl Cellulose Admixture and Silica Fume
134. Cho Eunsan, Gwon Seongwoo, Cha Soowon, Shin Myoungsu (2025-04)
     Impact of Accelerator on Rheological Properties of Cement Composites with Cellulose Microfibers:
     3D Printing Perspective
135. Tseng Kuo-Chang, Chi Maochieh, Yeih Weichung, Huang Ran (2025-04)
     Influence of Slag/Fly Ash as Partial Cement Replacement on Printability and Mechanical Properties of 3D-Printed Concrete
136. Jiang Yu, Zhang Qingxin, Tabbaa Abir, Daly Ronan (2025-03)
     The Critical Role of Time-Dependent Rheology for Improved Quality Control of 3D Printed Cementitious Structures
137. Nieświec Martyna, Chajec Adrian (2025-03)
     Effect of Materials on the Properties of Fresh Cementitious Composites for 3D Printing:
     Short Review
138. Du Guoqiang, Sun Yan, Qian Ye (2025-03)
     In-Plane and Out-of-Plane Compressive Performance of Bio-Inspired 3D Printed Strain-Hardening Cementitious Composite Lattice Structures
139. Koszela Kamila, Chajec Adrian (2025-03)
     Sustainable Additive Manufacturing:
     How the Composition of the Cementitious Mix Influences Its Fresh Properties
140. Nassrullah Ghaith, Ali Mohd, Rub Rashid, Cho Cung-Suk et al. (2025-03)
     Optimizing Cement-Based Material Formulation for 3D Printing:
     Integrating Carbon Nanotubes and Silica Fume
141. Chai Hwa, Shiotani Tomoki (2025-03)
     Opening Letter of RILEM TC QPA:
     Quality and Performance Assurance of Additively Manufactured Cementitious Composites by Advanced Non-Invasive Techniques
142. Zhou Wen, Xu Yading, Meng Zhaozheng, Xie Jinbao et al. (2025-03)
     Filament Stitching:
     An Architected Printing Strategy to Mitigate Anisotropy in 3D-Printed Engineered Cementitious Composites
143. Liu Han, Laflamme Simon, Cardinali Amelia, Lyu Ping et al. (2025-03)
     Enhancing 3D-Printed Cementitious Composites with Recycled Carbon Fibers from Wind Turbine Blades
144. Rajendran Naveenkumar, Runge Troy, Bergman Richard, Nepal Prakash et al. (2025-03)
     Economic and Environmental Impact Analysis of Cellulose Nanocrystal-Reinforced Cementitious Mixture in 3D Printing
145. Zafar Muhammad, Shahid Adnan, Sedghi Reza, Hojati Maryam (2025-03)
     Optimization of Biopolymer Additives for 3D Printable Cementitious Systems:
     A Design of Experiment Approach
146. Chen Meng, Cheng Jianhua, Zhang Tong, Wang Yuting (2025-03)
     Experimental Characterization and Constitutive Modelling of the Anisotropic Dynamic Compressive Behavior of 3D Printed Engineered Cementitious Composites
147. Khanverdi Mohsen, Das Sreekanta (2025-03)
     Experimental Study on Water Penetration and Thermal Resistance of Large-Scale 3D-Printed Cementitious Walls
148. Araújo Rísia, Martinelli Antônio, Cabral Kleber, Nunes Ueslei et al. (2025-03)
     Effect of Lightweight Expanded Clay Aggregate (LECA) On the Printability of Cementitious Compositions for 3D Printing
149. Silveira Júnior Jairon, Sakata Rafael, Onghero Lucas, Matos Paulo et al. (2025-03)
     Al-Anodizing Waste as a Supplementary Cementitious Material for 3D-Printed Portland Cement
150. Liu Xiongfei, Guo Pei, Wang Haonan, Zhang Yi (2025-03)
     Spray-Based 3D Printed Cementitious Electromagnetic Wave Absorption Materials:
     Optimization with Structures Design
151. Zhu Binrong, Zhang Yuhang, Ye Huzi, Wei Yang et al. (2025-03)
     Low-Velocity Impact Performance of Biomimetic 3D Printed Engineered Cementitious Composites Beams
152. Li Qiyan, Wen Xiaodong, Gao Xiaojian (2025-02)
     Rheological and Mechanical Properties of 3D-Printable Magnesium-Oxysulfate-Cements
153. Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Deng Qi et al. (2025-02)
     Fresh Properties and Rheological Behavior of 3D-Printed Cementitious Composites Incorporating Recycled PVC and Nylon Fibers:
     An Experimental Approach
154. Bakhshi Amir, Zafar Muhammad, Hojati Maryam (2025-02)
     A Study on Achieving High Tensile Ductility in 3D-Printable Engineered Cementitious Composites Reinforced with 8mm Fibers
155. Yuan Yong, Fatoyinbo Imoleayo, Sheng Ruiyi, Wang Qiling et al. (2025-02)
     Advancing the Applicability of Recycled Municipal Solid Waste Incineration Bottom Ash as a Cement Substitute in Printable Concrete:
     Emphasis on Rheological and Microstructural Properties
156. Teng Fei, Xu Fengming, Yang Minxin, Yu Jie et al. (2025-02)
     Development of Sustainable Strain-Hardening Cementitious Composites Containing Diatomite for 3D Printing
157. Shen Qiang, Sun Dongpu, Lu Chenyu, Zhang Zhigang et al. (2025-02)
     Fresh and Anisotropic-Mechanical Properties of Polyoxymethylene Fibers Reinforced 3D Printable Cementitious Composites
158. Das Arnesh, Wenger Cedric, Walpen Lukas, Flatt Robert (2025-02)
     Early-Age Hydration of Accelerated Low-Carbon Cements for Digital Fabrication
159. Albrecht Sophie, Hellerbrand Stefan, Weininger Florian, Thiel Charlotte (2025-02)
     Strategies for Minimizing Environmental Impact in Construction:
     A Case Study of a Cementitious 3D Printed Lost Formwork for a Staircase
160. Chen Wenguang, Liang Long, Zhou Boyang, Ye Junhong et al. (2025-02)
     A Fracture Mechanics Model for Predicting Tensile Strength and Fracture Toughness of 3D Printed Engineered Cementitious Composites
161. Du Guoqiang, Qian Ye (2025-01)
     Enhancing the Fracture and Flexural Behavior of 3D Printed Strain-Hardening Cementitious Composites with Nature-Inspired Single and Double Bouligand Structures
162. Pepe Marco, Lombardi Rosario, Lima Carmine, Paolillo Bruno et al. (2025-01)
     Experimental Evidence on the Possible Use of Fine Concrete and Brick Recycled Aggregates for 3D Printed Cement-Based Mixtures
163. Zhong Jianjun, Lyu Libo, Deng Yongjie, Ma Haiyan et al. (2025-01)
     An Evaluation-Method for the Printability of Magnesium-Phosphate-Cement Concrete for Integrated Mixing-Stirring-Extrusion Rapid 3D Printing
164. Chen Meng, Yu Kanghao, Zhang Tong, Wang Yuting (2025-01)
     Characterizing and Modelling the Bond-Slip-Behavior of Steel-Bars in 3D Printed Engineered Cementitious Composites
165. Wang Yibo, Yan Ming, Yang Kun, Ao Chenyang et al. (2025-01)
     Effect of Wall-Slip on the Extrusion-Characteristics of 3D Printing of Cementitious Materials
166. Zhang Tianjie, Wang Donglei, Lu Yang (2025-01)
     A Navier-Stokes-Informed Neural Network for Simulating the Flow-Behavior of Flowable Cement-Paste in 3D Concrete Printing
167. Yu Jie, Teng Fei, Ye Junhong, Zhang Dong et al. (2025-01)
     Size-Dependent Model to Predict the Flexural-Strength of 3D Printed Engineered Cementitious Composites Beams
168. Pierre Alexandre, Perrot Arnaud (2025-01)
     Alternative Printing-Methods for Cementitious Materials
169. Nadi Mouad, Majdoubi Hicham, Haddaji Younesse, Bili Oumaima et al. (2025-01)
     Digital Fabrication Processes for Cementitious Materials Using Three-Dimensional 3D Printing Technologies
170. Yu Jie, Xu Fengming, Zhang Hanghua, Ye Junhong et al. (2025-01)
     Leveraging Incinerator Bottom Ash for Mitigating Early-Age Shrinkage in 3D Printed Engineered Cementitious Composites
171. Obermeier Nico, Richter Christiane, Wiese Felix, Stengel Thorsten (2025-01)
     Low Global-Warming-Potential and Resource-Efficient 3D Printing Cement-Based Concrete
172. Brunner Kim, Stengel Thorsten, Kustermann Andrea (2025-01)
     3D Particle-Bed Printing Using Different Cementitious Binders and Recycled Sand
173. Richter Christiane, Maurer Christian, Jungwirth Jörg (2025-01)
     Reinforcement-Strategies for Additively Manufactured Concrete Elements:
     Exploring the Potential of Different Reinforcement-Materials for Selective Cement-Activation
174. Tinoco Matheus, Cavalcante Tiago, Andrade Luiza, Araújo Olga et al. (2025-01)
     Mix-Design-Strategies for 3D Printable Bio-Based Cementitious Composites Using Rice-Husk-Particles as Multifunctional Aggregates
175. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa et al. (2024-12)
     From Local Earth to Modern Structures:
     A Critical Review of 3D Printed Cement Composites for Sustainable and Efficient Construction
176. Vargas Armando, Robayo-Salazar Rafael, Gutiérrez Ruby (2024-12)
     Effects of Incorporating Fine Aggregates and Polypropylene-Micro-Fibers on the Cracking-Control of 3D Printed Cementitious Mixtures
177. Li Yeou-Fong, Liang Yu-Fang, Syu Jin-Yuan, Huang Chi-Hong et al. (2024-12)
     Static and Dynamic Mechanical Characteristics of 3D Printed Anisotropic Basalt Fiber-Reinforced Cement Mortar
178. Zhao Zhihui, Cai Xianhuan, Chen Fan, Gong Yongfan et al. (2024-12)
     Effect of Wollastonite-Content on Rheology and Mechanical Properties of 3D Printed Magnesium-Potassium-Phosphate-Cement-Based Material of MgO-SiO2-K2HPO4
179. Liu Junxing, Li Peiqi, Piao Taiyan, Im Sumin et al. (2024-12)
     High-Alumina Cementitious Materials for Binder-Jetting 3D Printing:
     Exploring Suitable Mixing-Ratio and Curing-Solution for Improving Mechanical Properties and Hydration-Reaction
180. Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-12)
     Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing Technology:
     Corrigendum
181. Bai Meiyan, Xiao Jianzhuang, Ding Tao, Yu Kequan (2024-12)
     Interfacial Bond-Properties Between 3D Printed Engineered Cementitious Composite and Post-Cast Concrete
182. Luo Surong, Li Wenqiang, Cai Yili, Zhang Kaijian (2024-12)
     Effects of Carbonated Recycled Sand on the Interfacial Bonding Performance of 3D Printed Cement-Based Material
183. Wang Qingwei, Han Song, Liu Qi, Yang Junhao et al. (2024-12)
     Research on the 3D Printing Process and Filament Shape of Cementitious Materials in Low Gravity
184. Márquez Álvaro, Varela Hugo, Barluenga Gonzalo (2024-12)
     Rheology and Early-Age Evaluation of 3D Printable Cement-Limestone-Filler-Pastes with Nano-Clays and Methylcellulose
185. Li Ben, Li Kaihang, Lyu Xuetao, Zhao Canhao et al. (2024-12)
     Microscopic Mechanism and Predicting Calculation on Mechanical Properties of Basalt-Fiber-Modified 3D Printing Cement-Based Materials
186. Yaqub Walid, Aslani Farhad (2024-12)
     Mechanical Properties and Fire-Resistance of 3D Printed Cementitious Composites with Plastic Waste
187. Silvestro Laura, Ribeiro Rodrigo, Navarrete Iván (2024-12)
     Advancements in Low Carbon-Emission Cements for 3D Printing:
     A State-of-the-Art Review
188. Ge Yali, Yao Jie (2024-11)
     Influence of FA and HPMC on the Fresh Properties and Anisotropy of 3D Printing Engineered Cementitious Composites
189. Medvedev Vyacheslav, Pustovgar Andrey, Adamtsevich Aleksey, Adamtsevich Liubov et al. (2024-11)
     Improving Inter-Layer Adhesion of Cementitious Materials for 3D Construction Printing
190. Ali Mohd, Rub Rashid, Banat Fawzi, Kim Tae-Yeon (2024-11)
     Enhancing the Printing Quality and Mechanical Properties of 3D Printed Cement Composites with Date-Syrup-Based Graphene-Coated-Sand Hybrid
191. Wang Qingwei, Han Song, Yang Junhao, Li Ziang et al. (2024-11)
     Optimizing Printing and Rheological Parameters for 3D Printing with Cementitious Materials
192. Kosson Michael, Brown Lesa, Thorne Garret, Sanchez Florence (2024-11)
     Influence of Internal Architecture and Ink Formulation on the Thermal Behavior of 3D Printed Cementitious Materials
193. Wu Mushuang, Wang Zixiao, Chen Yuxuan, Zhu Mengyu et al. (2024-11)
     Effect of Steel-Slag on Rheological and Mechanical Properties of Sulfoaluminate-Cement-Based Sustainable 3D Printing Concrete
194. Sun Zhaoyang, Zhao Yuyang, Hou Dongshuai, Li Zongjin et al. (2024-11)
     Rheology-Control of Cement-Paste by In-Situ Polymerization for 3D Printing Applications
195. Ji Yianliang, Pott Ursula, Mezhov Alexander, Rößler Christiane et al. (2024-11)
     Modelling and Experimental Study on Static Yield-Stress-Evolution and Structural Build-Up of Cement-Paste in Early-Stage of Cement Hydration
196. Günzel F., Moelich Gerrit, Kanyenze Simba, Kruger Jacques et al. (2024-11)
     Investigating Inherent Cement Setting Mechanisms to Improve the Constructability Performance of Extrusion-Based 3D Concrete Printing
197. Vaishali Panneer, Varunkumar P. (2024-11)
     Experimental Study on Behavior of Cement Concrete in 3d Printing
198. Wang Li, Lin Wenyu, Wan Qian, Li Zhijian et al. (2024-11)
     Manufacturing Accuracy Improvement of Concrete Product by Hybrid Additive-Subtractive Method Based on the Time-Dependent Characteristics of Cementitious Materials
199. Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Yang Min et al. (2024-11)
     Enhancing Mechanical Properties of 3D Printed Cementitious Composites Utilizing Hybrid Recycled PP and PET-Fibers
200. Zhang Yi, Tao Yaxin, Godinho Jose, Ren Qiang et al. (2024-11)
     Layer Interface Characteristics and Adhesion of 3D Printed Cement-Based Materials Exposed to Post-Printing Temperature Disturbance
201. Hassan Zohaib, Raza Saim, Shafei Behrouz, Mahoutian Mehrdad et al. (2024-11)
     Innovations to Improve 3D Concrete Printing of Portland Cement-Steel-Slag Blended Mortars
202. Lin Manfang, Li Lingzhi, Jiang Fangming, Ding Yao et al. (2024-11)
     Automated Reinforcement of 3D Printed Engineered Cementitious Composite Beams
203. Sousa Israel, Alessandro Antonella, Mesquita Esequiel, Laflamme Simon et al. (2024-11)
     Comprehensive Review of 3D Printed Cementitious Composites with Carbon Inclusions:
     Current Status and Perspective for Self-Sensing Capabilities
204. Wagner Juliana, Silveira Marcos, Vanderlei Romel, Das Sreekanta (2024-10)
     Comparative Analysis of Mold-Cast and 3D Printed Cement-Based Components:
     Implications for Standardization in Additive Construction
205. Senf Ferdinand, Javed Rezan, Funke Henrik, Gelbrich Sandra (2024-10)
     Concrete-Extrusion Using Sustainable Cement Alternatives
206. Ding Yao, Ou Xingjian, Qi Hongtuo, Xiong Gang et al. (2024-10)
     Inter-Layer Bonding Performance of 3D Printed Engineered Cementitious Composites:
     Rheological Regulation and Fiber Hybridization
207. Peng Chengming, Yang Zhenjun, Li Hui (2024-10)
     A Predictive Model for Interlayer-Water-Evolution and Experimental Validation of 3D Printed Cementitious Materials
208. Federowicz Karol, Cendrowski Krzysztof, Sikora Paweł (2024-10)
     Low-Carbon Cementitious Composite Incorporated with Biochar and Recycled Fines Suitable for 3D Printing Applications:
     Hydration, Shrinkage and Early-Age Performance
209. Varela Hugo, Tinoco Matheus, Mendoza Reales Oscar, Toledo Filho Romildo et al. (2024-10)
     3D Printable Cement-Based Composites Reinforced with Sisal-Fibers:
     Rheology, Printability and Hardened Properties
210. Sorgenfrei Reese, Zandifaez Peyman, Zhou Hongyu, Fiske Michael (2024-10)
     Investigating the Effect of Air-Voids on the Mechanical Properties of 3D Printable Cementitious Composites
211. Du Guoqiang, Qian Ye (2024-10)
     Bio-Inspired 3D Printing of Strain-Hardening Cementitious Composites Reticulated Shell-Roofs
212. Cuevas Villalobos Karla, Chung Sang-Yeop, Sikora Paweł, Stephan Dietmar (2024-10)
     Performance of Normal-Weight and Lightweight 3D Printed Cementitious Composites with Recycled Glass:
     Sorption and Microstructural Perspective
213. Du Guoqiang, Sun Yan, Qian Ye (2024-10)
     Nature-Inspired Approach for Enhancing the Fracture Performance of 3D Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
214. Flor Juncal Luis, Loporcaro Giuseppe, Scott Allan, Clucas Don (2024-10)
     Influence of Printing-Parameters on the Durability of 3D Printed Limestone-Calcined-Clay-Cement Mortar:
     Overlap Between Filaments and Nozzle-Offset
215. Samrani Phebe, Cao Yifang, Fimbres-Weihs Gustavo, Sanjaya Eric et al. (2024-09)
     Effect of Fly-Ash and Ground Waste Glass as Cement Replacement in Concrete 3D Printing for Sustainable Construction
216. Liu Xuelin, Sheng Haitao, Feng Binqing, Wang Liang et al. (2024-09)
     Development of Novel Alkaline-Electrolyzed-Water on the Properties of 3D Printed Calcium-Sulphoaluminate-Cement Composites
217. Asaf Ofer, Bentur Arnon, Amir Oded, Larianovsky Pavel et al. (2024-09)
     A 3D Printing Platform for Design and Manufacturing of Multi-Functional Cementitious Construction Components and Its Validation for a Post-Tensioned Beam
218. Edmund Dineth, Zahra Tatheer, Asad Mohammad, Thamboo Julian (2024-09)
     Experimental Investigation on Tensile-Characteristics of 3D Printed Auxetic-Embedded Cementitious Composites and Shear-Bonding Behavior to Masonry
219. Dulaj Albanela, Peeters Sef, Poorsolhjouy Payam, Salet Theo et al. (2024-09)
     Combined Analytical and Numerical Modelling of the Electrical Conductivity of 3D Printed Carbon-Nano-Tube-Cementitious-Nano-Composites
220. Chajec Adrian, Šavija Branko (2024-09)
     The Effect of Using Surface Functionalized Granite-Powder-Waste on Fresh Properties of 3D Printed Cementitious Composites
221. Liu Xuelin, Sheng Haitao, Feng Binqing, Zhao Piqi et al. (2024-09)
     Effect of Potassium and Sodium-Based Electrolyzed Water on the Rheological Properties and Structural Build-Up of 3D Printed Cement Composites
222. Meyuhas Ohad, Larianovsky Pavel, Natanian Jonathan, Sprecher Aaron (2024-09)
     Thermal and Structural Performance of Cork-Cement Composite for Additive Manufacturing
223. He Lewei, Pan Jiahui, Hee Yu, Chen Hao et al. (2024-09)
     Development of Novel Concave and Convex Trowels for Higher Inter-Layer Strength of 3D Printed Cement-Paste
224. Singh Pranay, Gadde Venkateswara, Zhou Chi, Okumus Pinar et al. (2024-09)
     Development of 3D Printable Strain-Hardening Cementitious Composites for Bridge-Related Applications
225. Ivaniuk Egor, Mechtcherine Viktor (2024-09)
     A Method for Measuring the Bond Strength Between Impregnated Carbon-Yarn and 3D Printed Strain-Hardening Cementitious Composites
226. Baytak Tugba, Gdeh Tawfeeq, Jiang Zhangfan, Arce Gabriel et al. (2024-09)
     Rheological, Mechanical, and Environmental Performance of Printable Graphene-Enhanced Cementitious Composites with Limestone and Calcined Clay
227. Wang Xiangyu, Du Liangfen, Liu Zhenbang, Li Mingyang et al. (2024-09)
     3D Cementitious Composites Printing with Pretreated Recycled Crumb-Rubber:
     Mechanical and Acoustic Insulation Properties
228. Chougan Mehdi, Skibicki Szymon, Noaimat Yazeed, Federowicz Karol et al. (2024-09)
     Comparative Analysis of Ternary Blended Cement with Clay and Engineering-Brick-Aggregate for High-Performance 3D Printing
229. Padilla-Encinas Pilar, Fernández Raúl, Cuevas Jaime, Marieta Cristina et al. (2024-09)
     Low-Carbon Footprint Magnesium-Phosphate-Cement for 3D Concrete Printing
230. Zhang Yi, Tittelboom Kim, Tao Yaxin, Zhang Yiyuan et al. (2024-09)
     Understanding Carbonation in 3D Printed Cement-Based Materials with Exposed Bottom Surface
231. Farra Ramzi, Mazanec Oliver, Ducoulombier Nicolas, Mallet Alban (2024-09)
     Toward the Optimal Use of Local Cementitious Materials Through Novel Admixture-Technology and a Dedicated 2K-Printing-System
232. Ivaniuk Egor, Reißig Silvia, Mechtcherine Viktor (2024-09)
     Automating Penetration Tests for Fresh 3D Printed Cementitious Materials
233. Tasaki Haruto, Asakawa Tomoya, Kobayashi Noriyuki, Nishiwaki Tomoya et al. (2024-09)
     A Direction-Independent Reinforcement by Combination of Fiber-Reinforced Cementitious Composite and Automated Pin Insertion
234. Šahmenko Genādijs, Šinka Māris, Bumanis Girts, Sapata Alise et al. (2024-09)
     Ternary Gypsum-Cement-Pozzolan Composites for 3D Printing with Reduced Environmental Impact
235. Noaimat Yazeed, Ghaffar Seyed (2024-09)
     Exploring Low-Carbon Cementitious Materials for 3D Printing Applications:
     A Comparison Between Limestone-Calcined-Clay-Cement and One-Part Alkai-Activated Material
236. Haghighat Negin, Mollah Md., Sannerud Stian, Boyer Julie et al. (2024-09)
     Rheology and Printability of Cement-Paste Modified with Filler from Manufactured Sand
237. Bono Victor, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2024-09)
     Tailored Low-Carbon Footprint Cementitious Material for 3D Printing:
     Strategies for Rheology Adjustment and Mechanical Performance Estimation
238. Herding Friedrich, Lowke Dirk (2024-09)
     Improving the Dimensional Accuracy in Selective Cement-Activation by w/c-Ratio Gradation
239. Barry Mamadou, Jacquet Yohan, Kachkouch Fatima, Perrot Arnaud (2024-09)
     Instrumentation of the Extruder Nozzle Using Load Cells:
     Towards an In-Line Quality-Control Device for 3D Printed Cement-Based Materials
240. Tomolt Laura, Meggers Forrest, Moini Mohamadreza (2024-09)
     3D Printing Channel Networks with Cement-Paste
241. Hlaváček Petr, Wolf Christoph, Robens-Radermacher Annika, Kühne Hans-Carsten (2024-09)
     Powder-Bed 3D Printing of Cementitious Materials for Lightweight Construction Elements
242. Zargayouna Habib, Paquet Elodie, Mabrouki Tarek, Hamdi Essaieb et al. (2024-09)
     Analysis of the Effect of Substituting Cement with Marble-Powder on the Mortar Characteristics Used in 3D Printing
243. Qian Shunzhi, Zhao Huanyu, Meng Dan (2024-09)
     Numerical Study of Concrete Beams with 3D Printed Strain-Hardening Cementitious Composites (SHCC)
244. Obermeier Nico, Brunner Kim, Wiese Felix, Stengel Thorsten (2024-09)
     Development of Low-Cement Lightweight Concrete Mixes for 3D Extrusion Printing
245. Sapata Alise, Šinka Māris, Šahmenko Genādijs, Bajāre Diāna et al. (2024-09)
     Development of 3D Printable Cement-Based Composite Containing Oil Shale Ash
246. Zhan Yiyuan, Lesage Karel, Schutter Geert (2024-09)
     Mechanical Properties of 3D Printable Responsive Cement Mortar After Magnetic Intervention
247. Chen Yu, Zhang Yamei, Schlangen Erik, Çopuroğlu Oğuzhan (2024-09)
     Development of Set-on-Demand 3D Printable Limestone-Calcined-Clay-Based Cementitious Materials Using Desalination Brine
248. Márquez Álvaro, Ramallo Laura, Varela Hugo, Barluenga Gonzalo et al. (2024-09)
     3D Printing Architectural Applications of Cement-Lime Mortars with Microencapsulated Phase-Change-Material
249. Jiang Yu, Tabbaa Abir, Daly Ronan (2024-09)
     Effects of Time-Dependent Rheological Properties of Cementitious Materials on the Print Quality of Extrusion-Based 3D Printing
250. Brunner Kim, Tandon Kai, Stengel Thorsten (2024-09)
     Hydration Characteristics of 3D Particle-Bed Printed Cementitious Specimens
251. Zhou Wen, Xu Yading, Šavija Branko, McGee Wesley et al. (2024-09)
     Stitching Engineered Cementitious Composites (ECC ):
     Unraveling Anisotropy Challenges Through Architectured 3D Printing Path Design
252. Hassan Zohaib, Bernal Susan, Raza Saim, Kammer David et al. (2024-09)
     Feasibility-Assessment of 3D Printability of Portland-Cement-Steel-Slag Blended Mortar
253. Sadeghzadeh Benam Shaghayegh, Sandalci Ilgin, Bundur Zeynep, Bebek Özkan (2024-09)
     Bio-Based Additives to Improve the Rheology of High-Volume Fly-Ash Cement-Based Mortar for 3D Printing
254. Zhang Hongping, Duan Shuni, Hu Zhichao, Liu Litao et al. (2024-09)
     Evaluation of Plasticity and Determination of Deformation Index of 3D Printed Composite Cement-Based Materials
255. Zhao Zhihui, Liu Minghao, Kang Aihong, Cai Xianhuan et al. (2024-08)
     Rheology and Buildability of Sustainable 3D Printed Magnesium-Potassium-Phosphate-Cement Composites Incorporating MgO-SiO2-K2HPO4
256. Jarabo Rocío, Fuente González Elena, García Calvo José, Carballosa Pedro et al. (2024-08)
     Nano-Crystalline-Cellulose to Reduce Superplasticizer-Demand in 3D Printing of Cementitious Materials
257. Disu Oluwatimilehin, Ismail Sikiru, Wood Luke, Chrysanthou Andreas et al. (2024-08)
     Design and Development of a Small-Scale Cement-Based 3D Printing Robot Extrusion Nozzle
258. Melcher Grace, Rauch Andy, Yashar Melodie, Ballard Jason (2024-08)
     3D Printing ICONs Cosmic Pavilion:
     A Case Study in Cementitious Extrusion of Unsupported Cantilevers
259. Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-08)
     Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing-Technology
260. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2024-08)
     Time-Dependent Behavior of 3D Printed Fiber-Reinforced Limestone-Calcined-Clay-Cement Concrete Under Sustained Loadings
261. Du Guoqiang, Sun Yan, Qian Ye (2024-08)
     3D Printed Strain-Hardening Cementitious Composites (3DP-SHCC) Reticulated Shell Roof Inspired by the Water Spider
262. Ding Yao, Liu Jiepeng, Ou Xingjian, Nishiwaki Tomoya et al. (2024-08)
     3D Printing Hybrid-Fiber-Reinforced Engineered Cementitious Composites:
     Feasibility in Long-Open-Time Applications
263. Robayo-Salazar Rafael, Muñoz Miguel, Vargas Armando, Gutiérrez Ruby (2024-08)
     Effects of Incorporating Bentonite, Metakaolin, Microsilica, and Calcium-Carbonate on the Rheological Properties of Portland-Cement-Based 3D Printing Inks
264. Yang Rijiao, Xu Chengji, Lan Yan, Qiu Yue et al. (2024-08)
     Near Pixel-Level Characterisation of Micro-Fibers in 3D Printed Cementitious Composites and Migration Mechanisms Using a Novel Iterative Method
265. Zuo Wenqiang, Caneda-Martínez Laura, Keita Emmanuel, Aimedieu Patrick et al. (2024-08)
     Drying-Induced Damages in Exposed Fresh Cement-Based Materials at Very Early-Ages:
     From Standard Casting to 3D Printing
266. Moini Mohamadreza, Rodriguez Fabian, Olek Jan, Youngblood Jeffrey et al. (2024-07)
     Mechanical Properties and Fracture Phenomena in 3D Printed Helical Cementitious Architected Materials Under Compression
267. Huang Zili, Yang Weiyi, Verma Rupesh, Nguyen Giang et al. (2024-07)
     Application of Adelaide-University-Snapback-Indirect-Tensile-Test on 3D Printed Cement-Based Materials
268. Peng Yiming, Unluer Cise (2024-07)
     Development of 3D Printed Magnesium-Silicate-Hydrate-Cement Mixes Involving Metakaolin as a Substitute for Silica-Source
269. Liu Zhenbang, Li Mingyang, Liu Zhixin, Wong Teck (2024-07)
     Effects of Vinyl-Acetate and Ethylene-Copolymer on Printing and Mechanical Performances of 3D Printing Cementitious Materials
270. Liew Kim, Li Gen, Yin Binbin, Sun Jinhua et al. (2024-07)
     Structural Deterioration and Mechanical Degradation of Limestone-Calcined-Clay-Cement Under Elevated Temperature
271. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Mechtcherine Viktor, Sanjayan Jay (2024-07)
     Two-Part Print-Head Mixing of Hybrid Alkali-Activated Cement for Buildability Enhancement in 3D Concrete Printing
272. Zhang Yi, Tittelboom Kim, Schutter Geert, Jiang Zhengwu (2024-07)
     Active Rheology-Control for 3D Printable Cement-Based Materials by Temperature:
     An Exploratory Study
273. Zhang Yiyuan, Lesage Karel, Zhang Yi, Tao Yaxin et al. (2024-07)
     Effect of Magnetic Intervention-Time on the Buildability of Printable Cement and Limestone-Pastes Containing Fe3O4-Particles
274. Asghari Y., Mohammadyan-Yasouj S., Petrů M., Ghandvar H. et al. (2024-07)
     3D Printing and Implementation of Engineered Cementitious Composites:
     A Review
275. Shao Lijing, Liu Zhaolong, Liu Qi, Wang Haochuan et al. (2024-07)
     A New Strategy to Enhance 3D Printability of Cement-Based Materials:
     In-Situ Polymerization
276. Wang Yuting, Chen Meng, Zhang Tong, Zhang Mingzhong (2024-07)
     Hardening Properties and Microstructure of 3D Printed Engineered Cementitious Composites Based on Limestone-Calcined-Clay-Cement
277. Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-07)
     Development of Strain-Hardening Cementitious Composites (SHCC) As Bonding Materials to Enhance Inter-Layer and Flexural Performance of 3D Printed Concrete
278. Ye Junhong, Zhuang Zicheng, Teng Fei, Yu Jie et al. (2024-07)
     Comparative Environmental-Assessment of 3D Concrete Printing with Engineered Cementitious Composites
279. Ivaniuk Egor, Tošić Zlata, Müller Steffen, Lordick Daniel et al. (2024-07)
     Automated Manufacturing of Reinforced Modules of Segmented Shells Based on 3D Printing with Strain-Hardening Cementitious Composites
280. Duan Jiaqi, Sun Shouzheng, Chi Shengfeng, Hu Chunyou et al. (2024-06)
     Effect of Process Parameters on Forming Quality and Flexural Strength of Continuous-Fiber-Reinforced Cement-Based 3D Printed Composites
281. Shoaei Parham, Gallantree-Smith Harrison, Martínez Pacheco Victor, Pamies Ramón et al. (2024-06)
     Comparative Analysis of 3D Printing of Portland Cement Mortars with Hydroxypropyl-Methylcellulose and Micro-Fibrillated Cellulose as Viscosity-Modifying-Agents
282. Ghaffar Seyed, Noaimat Yazeed, Chougan Mehdi, Kheetan Mazen (2024-06)
     Emerging Resources for the Development of Low-Carbon Cementitious Composites for 3D Printing Applications
283. Spencer Lawson, Genedy Moneeb, Strait James, Nair Sriramya et al. (2024-06)
     Concrete Gyroid:
     An Additive Manufacturing (AM) Method to 3D Print Gyroid Geometries with a Cementitious Material
284. Liu Junli, Haikola Pirjo, Fox Kate, Tran Jonathan (2024-06)
     3D Printing of Cementitious Composites with Seashell-Particles:
     Mechanical and Microstructural Analysis
285. Ndarowa Tariro, Mahachi Jeffrey, Ikotun Bolane (2024-06)
     A Review of Optimization of Limestone and Calcined-Clay-Cement Concrete Mixtures for 3D Printing
286. Kilic Ugur, Soliman Nancy, Omran Ahmed, Ozbulut Osman (2024-06)
     Effects of Cellulose Nanofibrils on Rheological and Mechanical Properties of 3D Printable Cement Composites
287. Čítek David, Hurtig Karel, Kolísko Jiří, Koteš Peter (2024-06)
     Cementitious Material Development for Additive Fabrication
288. Melter Oto, Čítek David, Hvizdal Ales, Gabriel Michael et al. (2024-06)
     Development of a Robotic Fabrication System for Cementitious Materials
289. Šahmenko Genādijs, Puzule Līga, Sapata Alise, Šlosbergs Pēteris et al. (2024-06)
     Gypsum-Cement-Pozzolan Composites for 3D Printing:
     Properties and Life Cycle Assessment
290. Yan Kang-Tai, Wang Xian-Peng, Ding Yao, Li Lingzhi et al. (2024-06)
     3D Printed LC3-Based Lightweight Engineered Cementitious Composites:
     Fresh State, Hardened Material-Properties and Beam-Performance
291. Li Haodao, Wei Jingjie, Khayat Kamal (2024-06)
     3D Printing of Fiber-Reinforced Calcined Clay-Limestone-Based Cementitious Materials:
     From Mixture Design to Printability Evaluation
292. Basha Shaik, Nugraha Joshua, Rehman Atta, Choi Kichang et al. (2024-06)
     Structuration and Yield Strength Characterization of Hybrid Alkali-Activated Cement Composites for Ultra-Rapid 3D Construction Printing
293. Čítek David, Hurtig Karel, Bureš Vladislav, Koteš Peter (2024-06)
     Cementitious Material Development for Additive Fabrication
294. Matos Paulo, Prigol Hellen, Schackow Adilson, Silva Nazário Samara et al. (2024-06)
     Quality-Control-Tests of Fresh 3D Printable Cement-Based Materials
295. Mohamed Ibrahim, Senthil Kumar (2024-05)
     3D Printed Concrete Using Portland-Pozzolana-Cement:
     Fly-Ash-Based
296. Chen Wenguang, Ye Junhong, Jiang Fangming, Fediuk Roman et al. (2024-05)
     Printability Region for 3D Printable Engineered Cementitious Composites
297. Skibicki Szymon, Federowicz Karol, Hoffmann Marcin, Chougan Mehdi et al. (2024-05)
     Potential of Reusing 3D Printed Concrete (3DPC) Fine Recycled Aggregates as a Strategy Towards Decreasing Cement Content in 3DPC
298. Luo Surong, Li Wenqiang, Wang Dehui (2024-05)
     Study on Bending Performance of 3D Printed PVA-Fiber-Reinforced Cement-Based Material
299. Rahman Mahfuzur, Rawat Sanket, Yang Chunhui, Mahil Ahmed et al. (2024-05)
     A Comprehensive Review on Fresh and Rheological Properties of 3D Printable Cementitious Composites
300. Sarker Mohiuddin, Rahmadan Md, Abedin Mohammad (2024-05)
     Engineered Cementitious Composites:
     Design, Structural and 3D Printing Applications
301. Yan Kang-Tai, Li Lingzhi, Ye Junhong, Bazarov Dilshod et al. (2024-05)
     Anisotropic Size-Effect of 3D Printed LC3-Based Engineered Cementitious Composites
302. Liu Xiongfei, Zhao Xi, Wang Nan, Zhang Yi et al. (2024-05)
     Powder-Based 3D Printed Magnesium Phosphate Cement:
     Mechanical Isotropy Optimization Using Borax
303. Du Guoqiang, Qian Ye (2024-05)
     Effects of Printing-Patterns and Loading-Directions on Fracture Behavior of 3D Printed Strain-Hardening Cementitious Composites
304. Salari Farid, Zocca Andrea, Bosetti Paolo, Hlaváček Petr et al. (2024-05)
     Powder-Bed 3D Printing by Selective Activation of Magnesium-Phosphate-Cement:
     Determining Significant Processing Parameters and Their Effect on Mechanical Strength
305. Raval Amitkumar, Patel C. (2024-05)
     The Influence of Accelerators on Compressive Strength and Setting-Time of Cement to Achieve High Early Strength for 3D Concrete Printing Technology
306. Jiang Wei, Li Wenqian, Chen Xi (2024-05)
     An Extended Numerical Model of the First Exothermic Peak for Three Dimensional Printed Cement-Based Materials
307. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Mechtcherine Viktor, Sanjayan Jay (2024-05)
     Print-Head Mixing of Geopolymer and OPC Slurries for Hybrid Alkali-Activated Cement in 3D Concrete Printing
308. Liu Han, Laflamme Simon, Alessandro Antonella, Ubertini Filippo (2024-05)
     3D Printed Self-Sensing Cementitious Composites Using Graphite and Carbon-Micro-Fibers
309. Mu Ru, Chen Jiao, Qing Longbang, Fan Chunhao et al. (2024-05)
     Properties of a Steel-Fiber-Reinforced Cementitious Composite Stool with Digitally Distributed Steel-Fibers
310. Chen Anguo, Dai Pengfei, Lyu Qifeng (2024-05)
     Effect of Alkalized Straw-Fibers on the Properties of Three Dimensional Printed Cementitious Composite
311. Bodur Burak, Mecit Işık Muhammet, Benli Ahmet, Bayrak Barış et al. (2024-05)
     Durability of Green Rubberized 3D Printed Lightweight Cement Composites Reinforced with Micro-Attapulgite and Micro-Steel-Fibers:
     Printability and Environmental Perspective
312. Yang Jin, Zhai Gaoyuan, He Xingyang, Tang Yuanzhen et al. (2024-05)
     Properties and Microstructure of a Low-Carbon Clinker-Free Cementitious Binder and Its Extrusion-Based Printing Performance
313. Cavalcante Tiago, Toledo Filho Romildo, Mendoza Reales Oscar (2024-05)
     Influence of Recycled Concrete-Powder on Rheology of Printable Cement-Based Matrixes
314. Wang Xiangyu, Krishnan Padmaja, Celik Kemal (2024-04)
     Enhancing Carbonation and Thermal Insulation of Reactive Magnesium Oxide Cement (RMC)-Based 3D Printable Pastes with Cenospheres
315. Lu Bing, Wang Lining, Wang Xiangyu, Tan Ming et al. (2024-04)
     Development of Robotic Sprayable Self-Sensing Cementitious Material for Smart Structural Health Monitoring
316. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2024-04)
     Mitigation of Lack-of-Fusion in 3D Printed Limestone-Calcined-Clay-Cement Concrete Induced by Effective Micro-Organisms
317. Zaid Osama, Ouni Mohamed (2024-04)
     Advancements in 3D Printing of Cementitious Materials:
     A Review of Mineral Additives, Properties, and Systematic Developments
318. Corso Marla, Silva Maicon, Cardoso Flávia, Heck Stenio et al. (2024-04)
     Effect of the Addition of Graphite and Graphene-Oxide in the Mechanical Properties and Adsorption of CO2 in Cementitious Filaments
319. Silveira Júnior Jairon, Moura Cerqueira Kevin, Moura Ruan, Matos Paulo et al. (2024-04)
     Influence of Time-Gap on the Buildability of Cement Mixtures Designed for 3D Printing
320. Babafemi Adewumi, Norval Chris, Kolawole John, Paul Suvash et al. (2024-04)
     3D Printed Limestone-Calcined-Clay-Cement Concrete Incorporating Recycled Plastic-Waste:
     RESIN8
321. Zhang Yiyuan, Tao Yaxin, Zhang Yi, Tittelboom Kim et al. (2024-04)
     Up-Scaling Active Rheology-Control to Cement-Mortar with the Intervention of an In-Line Magnetic Field
322. Kompella Sriram, Marcucci Andrea, Monte Francesco, Levi Marinella et al. (2024-04)
     Fracture Behavior of Three-Dimensional-Printable Cementitious Mortars in Very Early-Ages and Hardened States
323. Anandaraj S., Sowmya S., Krishnaraja A., Mithun T. (2024-03)
     Development of Green Engineered Cementitious Composite Using Fly-Ash and Nano-Silica for 3D Printing
324. Shahid Mursaleen, Sglavo Vincenzo (2024-03)
     Binder-Jetting 3D Printing of Binary Cement-Siliceous Sand Mixture
325. Jia Zijian, Zhou Mengting, Chen Yu, Wang Wei et al. (2024-03)
     Effect of Steel-Fiber Shape and Content on Printability, Microstructure and Mechanical Properties of 3D Printable High-Strength Cementitious Materials
326. Pan Jinlong, Ping Pengxin, Ding Boyin, Zhu Binrong et al. (2024-03)
     Impact Behavior of 3D Printed Fiber-Reinforced Cementitious Composite Beams
327. Ali Mohd, Nassrullah Ghaith, Al-Rub Rashid, Khaswaneh Bashar et al. (2024-03)
     Influence of Carbon-Nano-Tubes on Printing Quality and Mechanical Properties of 3D Printed Cementitious Materials
328. Jancarikova Denisa, Khongova Ingrid, Bibora Petr, Szklorzova Halina (2024-03)
     3D Printed Cement Composites Testing
329. Chen Mingxu, Xu Jiabin, Yuan Lianwang, Zhao Piqi et al. (2024-03)
     Use of Creep and Recovery-Protocol to Assess the Printability of Fiber-Reinforced 3D Printed White-Portland-Cement Composites
330. Zandifaez Peyman, Shen Zhenglai, Sorgenfrei Reese, Li Yucen et al. (2024-03)
     Pathways to Formulate Lightweight and Ultra-Lightweight 3D Printable Cementitious Composites
331. Zhu Lingli, Zhao Wanting, Zhao Yu, Guan Xuemao (2024-03)
     Mechanism Analysis of Rheological Properties of 3D Printed Steel-Slag Cementitious Composite Based on Low-Field Nuclear-Magnetic-Relaxation-Test
332. Du Guoqiang, Sun Yan, Qian Ye (2024-03)
     Flexural Performance of Nature-Inspired 3D Printed Strain-Hardening Cementitious Composites with Bouligand Structures
333. Zhang Yi, Ren Qiang, Dai Xiaodi, Tao Yaxin et al. (2024-03)
     A Potential Active Rheology-Control Approach for 3D Printable Cement-Based Materials:
     Coupling of Temperature and Viscosity-Modifiers
334. Chen Meng, Fang Shuai, Wang Guangquan, Xuan Yiwei et al. (2024-03)
     Compressive and Flexural Behavior of Engineered Cementitious Composites-Based Auxetic Structures:
     An Experimental and Numerical Study
335. Gou Hongxiang, Sofi Massoud, Zhang Zipeng, Zhu Mintao et al. (2024-03)
     Combined Printable and Mechanical Analysis of 3D Printed Green High-Strength, Lightweight Engineered Cementitious Composites
336. Tiwari Adarsh, Pratapa Phanisri, Santhanam Manu (2024-03)
     Lattice Concrete:
     3D Printed Periodic Cellular Structures Through Selective Cement-Hydration
337. Wu Yun-Chen, Wang Xinbo, Li Mo (2024-03)
     Role of Thixotropy in Inter-Layer Microstructure and Properties of Additively Manufactured Cementitious Materials
338. Dams Barrie, Chen Binling, Kaya Yusuf, Orr Lachlan et al. (2024-03)
     Fresh Properties and Autonomous Deposition of Pseudoplastic Cementitious Mortars for Aerial Additive Manufacturing
339. Robayo-Salazar Rafael, Vargas Armando, Martínez Fabio, Gutiérrez Ruby (2024-02)
     Utilization of Powders and Fine Aggregates from the Recycling of Construction and Demolition Waste in the 3D Printing of Portland-Based Cementitious Materials
340. Liu Xiongfei, Wang Nan, Zhang Yi, Ma Guowei (2024-02)
     Optimization of Printing Precision and Mechanical Property for Powder-Based 3D Printed Magnesium Phosphate Cement Using Fly-Ash
341. Lai Xin, Gong Chen, He Enpei, Li Yinmian et al. (2024-02)
     Deep Learning for Predicting the Strength of 3D Printable Engineered Cementitious Composites
342. Vigneshwari Are, Jayaprakash Jaganathan (2024-02)
     A Review on 3D Printable Cementitious Material Containing Copper and Iron-Ore-Tailings:
     Material-Characterization, Activation-Methods, Engineering-Properties, Durability, and Microstructure-Behavior
343. İlcan Hüseyin, Özkılıç Hamza, Tuğluca Merve, Şahmaran Mustafa (2024-02)
     Inter-Layer Mechanical Performance of 3D Printed Cementitious Systems:
     A Comprehensive Study on Operational and Material Parameters
344. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2024-02)
     Hydration and Microstructure of Calcium-Sulfoaluminate-Portland-Cement Binder Systems for Set-on-Demand Applications
345. Jia Lutao, Jia Zijian, Zhang Zedi, Tang Zhenzhong et al. (2024-02)
     Effect of Recycled Brick-Powder with Various Particle-Features on Early-Age Hydration, Water-State, and Rheological Properties of Blended Cement-Paste in the Context of 3D Printing
346. Zhao Guoqi, Fan Yichang, Tang Can, Wei Yuanyuan et al. (2024-02)
     Preparation and Compressive Properties of Cementitious Composites Reinforced by 3D Printed Cellular Structures with a Negative Poisson's Ratio
347. Nóbrega Anna, Queiroz Junior Cleanto, Souza Wendell, Cabral Kleber et al. (2024-02)
     Computational Modeling for Structural Element Analysis Using Cement Composites in 3D Printing
348. Perales-Santillan M., Díaz-Aguilera Jorge, Mendoza-Rangel Jose (2024-02)
     Evaluation of the Rheological Behavior for Alkaline-Activated Cements of Metakaolin and Limestone for Its Potential Application in 3D Printing
349. Zhou Wen, Zhu He, Hu Wei-Hsiu, Wollaston Ryan et al. (2024-02)
     Low-Carbon, Expansive Engineered Cementitious Composites (ECC) In the Context of 3D Printing
350. Li Weihong, Chen Xuhao, Wang Yaoyu, Wan Detian et al. (2024-02)
     Effect of Embedded Filament Fibers on Mechanical Properties of 3D Printing Cement-Based Materials
351. Pi Yilin, Lu Cong, Yao Yiming, Li Baoshan (2024-01)
     A Rheological-Based Printability-Assessment Method for 3D Printing Engineered Cementitious Composites Considering Fiber-Dispersion
352. Xiao Jianzhuang, Bai Meiyan, Wu Yuching, Duan Zhenhua et al. (2024-01)
     Inter-Layer Bonding Strength and Pore Characteristics of 3D Printed Engineered Cementitious Composites
353. Wan Zhi, Xu Yading, He Shan, Schlangen Erik et al. (2024-01)
     The Use of Additive Manufacturing in Self-Healing Cementitious Materials:
     A State of the Art Review
354. Wang Qinghua, Xu Jinggang, Feng Duo, Li Wei et al. (2024-01)
     Properties and Printability Evaluation of Three-Dimensional Printing Magnesium-Oxychloride Cement by Fully Utilizing Aeolian-Sand
355. Dai Pengfei, Lyu Qifeng, Zong Meirong, Zhu Pinghua (2024-01)
     Effect of Waste-Plastic-Fibers on the Printability and Mechanical Properties of 3D Printed Cement Mortar
356. Slavcheva Galina, Artamonova Olga, Kotova Кristina, Shvedova Mariia et al. (2023-12)
     Pull-Out Behavior of Steel- and Carbon-Fibers in 3D Printable Cement Matrices of Various Compositions
357. Khan Shayan, Ghazi Syed, Amjad Hassan, Imram Muhammad et al. (2023-12)
     Emerging Horizons in 3D Printed Cement-Based Materials with Nano-Material-Integration:
     A Review
358. Fahim Abdullah, Admassu Natnael, Dailey Garret, Moradllo Mehdi (2023-12)
     Application of Cellulose-Nano-Crystals in 3D Printed Alkali-Activated Cementitious Composites
359. Li Yeou-Fong, Tsai Pei-Jen, Syu Jin-Yuan, Lok Man-Hoi et al. (2023-12)
     Mechanical Properties of 3D Printed Carbon Fiber-Reinforced Cement Mortar
360. Qiu Minghong, Sun Yan, Qian Ye (2023-12)
     Interfacial Bonding Performance of 3D Printed Ultra-High-Performance Strain-Hardening Cementitious Composites and Cast Normal Concrete
361. Hechtl Christian, Kränkel Thomas, Gehlen Christoph (2023-12)
     Near‐Nozzle Mixing for Additive Manufacturing of Cementitious Mortar:
     A Homogeneity Study
362. Mai (née Dressler) Inka, Herding Friedrich, Lowke Dirk (2023-12)
     Effect of Grain-Size and Layer-Thickness on Hardened State Properties in Selective Cement-Activation
363. Herding Friedrich, Mai (née Dressler) Inka, Lowke Dirk (2023-12)
     Reduction of the Cement Content in Selective Cement-Activation
364. Carvalho Ivo, Melo Abcael, Melo Carlos, Brito Mateus et al. (2023-12)
     Evaluation of the Effect of Rubber-Waste-Particles on the Rheological and Mechanical Properties of Cementitious Materials for 3D Printing
365. Dams Barrie, Shepherd Paul, Ball Richard (2023-11)
     Development and Performance Evaluation of Fibrous Pseudoplastic Quaternary Cement Systems for Aerial Additive Manufacturing
366. Chen Yu, Rahmani Hossein, Schlangen Erik, Çopuroğlu Oğuzhan (2023-11)
     An Approach to Develop Set-on-Demand 3D Printable Limestone-Calcined-Clay-Based Cementitious Materials Using Calcium-Nitrate
367. Chernysheva Natalia, Shatalova Svetlana, Lesovik Valeriy, Kozlov Pavel (2023-11)
     Deformation Characteristics of Dense and Foamed Mortars Based on Cement and Gypsum-to-Cement Binders for 3D Printing
368. Imagawa Koichi, Ohno Motohiro, Ishida Tetsuya (2023-11)
     An Experimental Study on Energy-Absorption-Capability of Cast and 3D Printed Architected Cement-Based Materials
369. Wang Yu, Rodriguez Fabian, Olek Jan, Zavattieri Pablo et al. (2023-11)
     Influence of Type of Fibers on Fresh and Hardened Properties of Three-Dimensional-Printed Cementitious Mortars
370. Lu Bing, Li Ziyang, Li Mingyang, Feng Jianhang et al. (2023-11)
     Substitution of Cement by Marine-Clay in Spray-Based 3D Concrete Printing
371. Ye Junhong, Zhang Jiangdi, Yu Jie, Yu Jiangtao et al. (2023-11)
     Flexural Behaviors of 3D Printed Lightweight Engineered Cementitious Composites (ECC) Slab with Hollow Sections
372. Li Huanbao, Li Zihan, Skibniewski Mirosław, Wang Liang et al. (2023-11)
     Molding-Quality-Control with Non-Linear Forming-Method in 3D Cement Printing
373. Henschen Jacob, Blood Daniel, Kawashima Shiho, Kirkvold Heather (2023-11)
     Teaching Additive Manufacturing with Consideration for Cementitious Materials
374. Jesus Manuel, Teixeira João, Alves Jorge, Pessoa Ana Sofia et al. (2023-10)
     Potential Use of Sugarcane-Bagasse-Ash in Cementitious Mortars for 3D Printing
375. Šána Vladimír, Litoš Jiří, Kolář Karel (2023-10)
     Mechanical Properties of the New Cement Composite Mixture Appropriate for Robotic Processing
376. Zhu Binrong, Wang Yufei, Sun Junbo, Wei Yang et al. (2023-10)
     An Experimental Study on the Influence of Waste-Rubber-Particles on the Compressive, Flexural and Impact Properties of 3D Printable Sustainable Cementitious Composites
377. Skripkiūnas Gintautas, Girskas Giedrius, Rishko Lyudmyla (2023-10)
     Lightweight Portland Cement Mixtures with Perlite for 3D Printing of Concrete Structures
378. Ye Junhong, Yang Minxin, Yu Jiangtao, Dai Yecheng et al. (2023-10)
     Size-Effect on Flexural and Fracture Behaviors of 3D Printed Engineered Cementitious Composites:
     Experimental and Numerical Studies
379. Pi Yilin, Lu Cong, Li Baoshan, Zhou Junhui (2023-10)
     Crack Propagation and Failure Mechanism of 3D Printing Engineered Cementitious Composites (3DP-ECC) Under Bending Loads
380. Hass Lauri, Nefs Karsten, Bos Freek, Salet Theo (2023-10)
     Application Potential of Combining Strain-Hardening Cementitious Composites and Helical Reinforcement for 3D Concrete Printed Structures:
     Case Study of a Spiral Staircase
381. Li Zhuming, Aslani Farhad (2023-10)
     Performance of 3D Printed Beams and Slabs Using Self-Sensing Cementitious Composites and DIC Method
382. Caron Jean-François, Ducoulombier Nicolas, Demont Léo, Bono Victor et al. (2023-10)
     3D Printing of Continuous-Fibers Cementitious Composites:
     Anisotropic 3D Mortar
383. Lyu Qifeng, Dai Pengfei, Zong Meirong, Zhu Pinghua et al. (2023-10)
     Plant-Germination Ability and Mechanical Strength of 3D Printed Vegetation Concrete Bound with Cement and Soil
384. Zafar Muhammad, Bakhshi Amir, Hojati Maryam (2023-10)
     Printability and Shape Fidelity Evaluation of Self-Reinforced Engineered Cementitious Composites
385. Sun Houchao, Li Furong, Shi Feiting (2023-10)
     Experimental Study on Dynamic Mechanical Properties of 3D Printed Cement-Based Materials Under Splitting Tension After High Temperature
386. Suryanto Benny, Higgins J., Aitken M., Tambusay Asdam et al. (2023-10)
     Developments in Portland Cement/GGBS Binders for 3D Printing Applications:
     Material-Calibration and Structural Testing
387. Sedghi Reza, Zafar Muhammad, Hojati Maryam (2023-10)
     Exploring Fresh and Hardened Properties of Sustainable 3D Printed Lightweight Cementitious Mixtures
388. Overmeir Anne, Šavija Branko, Bos Freek, Schlangen Erik (2023-09)
     Effects of 3D Concrete Printing Phases on the Mechanical Performance of Printable Strain-Hardening Cementitious Composites
389. Zhu Lingli, Yao Jie, Zhao Yu, Ruan Wenqiang et al. (2023-09)
     Printability and Early Mechanical Properties of Material-Composition Modified 3D Printing Engineered Cementitious Composites Based on the Response-Surface-Methodology
390. Saadati Farzaneh, Kani Ebrahim (2023-09)
     Phosphorous Slag-Based Geopolymer Cement Incorporate with Mullite for 3D Printing Application
391. Zhang Huan, Cao Shuai, Yilmaz Erol (2023-09)
     Polymer Shape Effect on Damage-Evolution, Internal Defects and Crack Propagation of 3D Printed Polymer-Based Cementitious Backfill
392. Yin Yunchao, Huang Jian, Wang Tiezhu, Yang Rong et al. (2023-09)
     Effect of Hydroxypropyl-Methylcellulose on Rheology and Printability of the First Printed Layer of Cement Activated Slag-Based 3D Printing Concrete
393. Liu Zhenbang, Li Mingyang, Quah Tan, Wong Teck et al. (2023-09)
     Comprehensive Investigations on the Relationship Between the 3D Concrete Printing Failure Criterion and Properties of Fresh-State Cementitious Materials
394. Li Te, Tier Laire (2023-09)
     Analysis of the Effect of Glass-Powder on the Printability of Cement-Based Materials for 3D Printing Using ImageJ
395. Hu Hailong, Huang Jian, Wang Tiezhu, Manuka Mesfin et al. (2023-09)
     Impact of Calcium Sulfoaluminate Cement on Printability and Early Strength Development of a Slag-Based 3D Printing Cementitious Material
396. Ji Xuping, Pan Tinghong, Liu Xingyao, Zhao Wenhao et al. (2023-09)
     Characterization of Thixotropic Properties of Fresh Cement‐Based Materials
397. Yue Hongfei, Zhang Zhuxian, Hua Sudong, Gao Yanan et al. (2023-09)
     Solid Waste-Based Set-on-Demand 3D Printed Concrete:
     Active Rheological-Control of Cement-Based Magneto-Rheological Fluids
398. Jia Zijian, Zhang Zedi, Jia Lutao, Cao Ruilin et al. (2023-09)
     Effect of Different Expansive Agents on the Early-Age Structural Build-Up Process of Cement-Paste
399. Li Mingyang, Zhang Dong, Wong Teck, Tan Ming et al. (2023-09)
     Modeling and Experimental Investigation of Fiber Orientation in Cast and 3D Printed Cementitious Composites
400. Sukontasukkul Piti, Khomkum Sila, Maho Buchit, Fujikake Kazunori (2023-09)
     Printability and Shape Stability of Cement Mortar Incorporating Low Volume of Micro-Polypropylene Fiber for 3D Printing Application
401. Matos Ana (2023-09)
     Waste Marble Valorisation in 3D Cementitious Materials Printing
402. Luo Fuming, Cui Peng, Tang Wei, Wu Chun-ran et al. (2023-09)
     Influences of Engineering Spoil on the Properties and Microstructure of 3D Printable Magnesium-Cement
403. Overmeir Anne, Šavija Branko, Bos Freek, Schlangen Erik (2023-08)
     3D Printable Strain-Hardening Cementitious Composites (3DP-SHCC):
     Tailoring Fresh and Hardened State Properties
404. Ye Junhong, Teng Fei, Yu Jie, Yu Shiwei et al. (2023-08)
     Development of 3D Printable Engineered Cementitious Composites with Incineration-Bottom-Ash for Sustainable and Digital Construction
405. Li Mingyang, Liu Zhixin, Ho Jin, Wong Teck (2023-08)
     Experimental Investigation of Fresh and Time-Dependent Rheological Properties of 3D Printed Cementitious Material
406. Nunes Gabrielly, Anjos Marcos, Lins Ana, Negreiros Ana et al. (2023-08)
     Evaluation of the Mechanical Behavior of Representative Volumetric Elements of 3DCP Masonry-Mixtures with Partial Replacement of Cement by Limestone-Filler and Metakaolin
407. Yang Huashan, Che Yujun, Luo Jie (2023-08)
     Calcium Leaching of 3D Printed Cement-Paste Exposed to Ammonium Chloride Solutions
408. Matos Paulo, Zat Tuani, Lima Marcelo, Neto José et al. (2023-08)
     Effect of the Superplasticizer-Addition Time on the Fresh Properties of 3D Printed Limestone-Calcined-Clay-Cement (LC³) Concrete
409. Olczyk Norbert, Skibicki Szymon, Gierszewska Natalia (2023-08)
     3D Printed Mortar with High Alumina-Cement as Alternative Solution for Standard Materials Used for 3D Printing
410. Mani Aravindhraj, Muthukumar S., Sathyanarayanan K. (2023-08)
     Use of Alccofine 1203 as a Sustainable Supplementary Cementitious Material for Printable Concrete
411. Chen Mingxu, Jin Yuan, Sun Keke, Wang Shoude et al. (2023-08)
     Study on the Durability of 3D Printed Calcium-Sulphoaluminate Cement-Based Materials Related to Rheology-Control
412. Zhou Wen, McGee Wesley, Gökçe H., Li Victor (2023-08)
     A Bio-Inspired Solution to Alleviate Anisotropy of 3D Printed Engineered Cementitious Composites (3DP-ECC):
     Knitting/Tilting Filaments
413. Xu Yading, Šavija Branko (2023-08)
     3D Auxetic Cementitious-Polymeric Composite Structure with Compressive Strain-Hardening Behavior
414. Zhang Yi, Zhu Yanmei, Ren Qiang, He Bei et al. (2023-08)
     Comparison of Printability and Mechanical Properties of Rigid and Flexible Fiber-Reinforced 3D Printed Cement-Based Materials
415. Lu Bing, Li Hongliang, Wong Teck, Qian Shunzhi (2023-08)
     Development of a Functional Cementitious Mixture with Expanded Graphite for Automated Spray Construction
416. Pessoa Ana Sofia, Jesus Manuel, Guimarães Ana, Lucas Sandra et al. (2023-07)
     Experimental Characterisation of Hygrothermal Properties of a 3D Printed Cementitious Mortar
417. Zhu Lingli, Zhang Meng, Zhang Yaqi, Yao Jie et al. (2023-07)
     Research Progress on Shrinkage Properties of Extruded 3D Printed Cement-Based Materials
418. Silva Guido, Burgos Valeria, Ñañez Robert, Kim Suyeon et al. (2023-07)
     Soil-Cement Matrices for Additive Construction:
     3D Printing System Validation and Printing Tests
419. Varela Hugo, Barluenga Gonzalo, Perrot Arnaud (2023-07)
     Extrusion and Structural Build-Up of 3D Printing Cement-Pastes with Fly-Ash, Nano-Clay and VMAs
420. Arrêteau Manon, Fabien Aurélie, Haddaji Badreddine, Chateigner Daniel et al. (2023-07)
     Review of Advances in 3D Printing Technology of Cementitious Materials:
     Key Printing Parameters and Properties Characterization
421. Sukontasukkul Piti, Maho Buchit, Komkham Sila, Pianfuengfoo Satharat et al. (2023-07)
     Precise Determination of Initial Printable Time for Cement Mortar 3D Printing Using a Derivative Method
422. Ibrahim Kamoru, Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-07)
     Hardened Properties of 3D Printed Limestone-Calcined-Clay-Cement Concrete
423. Rahemipoor Sahand, Hasany Masoud, Mehrali Mohammad, Almdal Kristoffer et al. (2023-07)
     Phase-Change-Materials Incorporation into 3D Printed Geopolymer Cement:
     A Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings
424. Litoš Jiří, Šána Vladimír, Uhlík Adam, Kolář Karel et al. (2023-07)
     Mechanical and Physical Properties of Cement Mixtures for 3D Processing
425. Ghantous Rita, Evseeva Anastasiia, Dickey Brandon, Gupta Shashank et al. (2023-07)
     Examining Effect of Printing-Directionality on Freezing-and-Thawing Response of Three-Dimensional-Printed Cement-Paste
426. Liu Junli, Tran Jonathan, Ginigaddara Thusitha, Mendis Priyan (2023-06)
     Exploration of Using Graphene Oxide for Strength Enhancement of 3D Printed Cementitious Mortar
427. Robayo-Salazar Rafael, Martínez Fabio, Vargas Armando, Gutiérrez Ruby (2023-06)
     3D Printing of Hybrid Cements Based on High Contents of Powders from Concrete, Ceramic and Brick Waste Chemically Activated with Sodium Sulphate (Na2SO4)
428. Anleu Paula, Pape Yann, Chen Qiyi, Advincula Rigoberto et al. (2023-06)
     An Innovative Carbonated Cementitious Material and Its Printability and Carbon Mineralization Capacity
429. Liu Junli, Tran Jonathan, Nguyen Vuong, Gunasekara Chamila et al. (2023-06)
     3D Printing of Cementitious Mortar with Milled Recycled Carbon-Fibers:
     Influences of Filament Offset on Mechanical Properties
430. Soares Augusto, Rodrigues Ana, Costa Hugo, Carmo Ricardo et al. (2023-06)
     Bond Between Layers of Cementitious Mortars Developed for 3D Printing
431. Nikravan Ata, Aydoğan Olcay, Dittel Gözdem, Scheurer Martin et al. (2023-06)
     Implementation of Continuous Textile-Fibers in 3D Printable Cementitious Composite
432. Obermeier Nico, Wiese Felix, Kustermann Andrea, Stengel Thorsten (2023-06)
     3D Printing Cement-Based Materials Using 100% of Recycled Aggregates
433. Pietras Daniel, Zbyszyński Wojciech, Sadowski Tomasz (2023-06)
     A 3D Printing Method of Cement-Based FGM Composites Containing Granulated Cork, Polypropylene Fibers, and a Polyethylene Net Inter-Layer
434. Chen Yu, Zhang Yu, He Shan, Liang Xuhui et al. (2023-06)
     Improving Structural Build-Up of Limestone-Calcined-Clay-Cement-Pastes by Using Inorganic Additives
435. Rahmat N., Ali Noorwirdawati, Abdullah Siti, Abdul Hamid Noor et al. (2023-06)
     Fresh Properties and Flexural Strength of 3D Printing Sustainable Concrete Containing GGBS as Partial Cement Replacement
436. Oh Sangwoo, Hong Geuntae, Choi Seongcheol (2023-05)
     Determining the Effect of Superabsorbent Polymers, Macrofibers, and Resting Time on the Rheological Properties of Cement Mortar Using Analysis of Variance:
     A 3D Printing Perspective
437. Oh Sangwoo, Choi Seongcheol (2023-05)
     Effects of Superabsorbent Polymers (SAP) On the Rheological Behavior of Cement Mortars:
     A Rheological Study on Performance Requirements for 3D Printable Cementitious Materials
438. Sun Guangcheng, Wang Zhiguang, Yu Chengkun, Qian Xiaoqian et al. (2023-05)
     Properties and Microstructures of 3D Printable Sulphoaluminate-Cement Concrete Containing Industrial Byproducts and Nano-Clay
439. Vergara Luis, Pérez Juan, Colorado Henry (2023-05)
     3D Printing of Ordinary Portland Cement with Waste-Wood-Derived Biochar Obtained from Gasification
440. Joshi Arpan, Carvalho Tomás, Gaspar Florindo (2023-04)
     Incorporation of Forest Biomass-Based Fly-Ash in Cement for 3D Printing
441. Gupta Shashank, Esmaeeli Hadi, Prihar Arjun, Ghantous Rita et al. (2023-04)
     Fracture- and Transport-Analysis of Heterogeneous 3D Printed Lamellar Cementitious Materials
442. Nodehi Mehrab, Omer Liam, Asiabanpour Bahram, Ozbakkaloglu Togay (2023-04)
     A Novel Lightweight Mechanism for 3D Printing of Cementitious Materials
443. Simedru Alexandru, Becze Anca, Cadar Oana, Scurtu Daniela et al. (2023-04)
     Structural Characterization of Several Cement-Based Materials Containing Chemical Additives with Potential Application in Additive Manufacturing
444. Noaimat Yazeed, Chougan Mehdi, Kheetan Mazen, Mandhari Othman et al. (2023-04)
     3D Printing of Limestone-Calcined-Clay-Cement:
     A Review of Its Potential Implementation in the Construction-Industry
445. Kumar Devalla Tharun, Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2023-04)
     Investigation on the Flexural and Tensile Performance of 3D Printable Cementitious Mixtures Considering the Effect of Fiber-Distribution
446. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Gowripalan Nadarajah (2023-04)
     Effects of Different Orientation-Angle, Size, Surface-Roughness, and Heat-Curing on Mechanical Behavior of 3D Printed Cement-Mortar with and without Glass-Fiber in Powder-Based 3DP
447. Bai Meiyan, Wu Yuching, Xiao Jianzhuang, Ding Tao et al. (2023-04)
     Workability and Hardened Properties of 3D Printed Engineered Cementitious Composites Incorporating Recycled Sand and PE-Fibers
448. Cruz Gil, Dizon John, Farzadnia Nima, Zhou Hongyu et al. (2023-04)
     Performance, Applications, and Sustainability of 3D Printed Cement and Other Geomaterials
449. Xu Nuoyan, Qian Ye (2023-04)
     Effects of Fiber-Volume Fraction, Fiber Length, Water-Binder Ratio, and Nano-Clay Addition on the 3D Printability of Strain-Hardening Cementitious Composites
450. Şahin Hatice, Temel Müge, Mardani Ali (2023-04)
     Determination of Optimum VMA Utilization Dosage in Cementitious Systems:
     In Terms of Rheological and Flowability Properties
451. Ma Guowei, Huang Chen, Zhang Junfei (2023-04)
     Inner Damage-Identification and Residual Strength-Assessment of a 3D Printed Tunnel with Marble-Like Cementitious Materials Using Piezoelectric Transducers
452. Ramezani Amir, Modaresi Shahriar, Dashti Pooria, Givkashi Mohammad et al. (2023-04)
     Effects of Different Types of Fibers on Fresh and Hardened Properties of Cement and Geopolymer-Based 3D Printed Mixtures:
     A Review
453. Salam Mohammad Abdul, Biernacki Joseph (2023-04)
     2D Stationary Computational Printing of Cement-Based Pastes with Time-Dependent Rheology
454. Panda Biranchi, Tran Jonathan (2023-03)
     Material-Design, Additive Manufacturing, and Performance of Cement-Based Materials
455. Zahabizadeh Behzad, Segundo Iran, Pereira João, Freitas Elisabete et al. (2023-03)
     Photocatalysis of Functionalised 3D Printed Cementitious Materials
456. Kilic Ugur, Ma Ji, Baharlou Ehsan, Ozbulut Osman (2023-03)
     Effects of Viscosity-Modifying Admixture and Nano-Clay on Fresh and Rheo-Viscoelastic Properties and Printability Characteristics of Cementitious Composites
457. Cui Weijiu, Wang Tianheng, Chen Xu, Shen Wenkai et al. (2023-03)
     Study of 3D Printed Concrete with Low-Carbon Cementitious Materials Based on Its Rheological Properties and Mechanical Performances
458. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2023-03)
     Developing 3D Printable and Buildable Limestone-Calcined-Clay-Based Cement Composites with Higher Aggregate Content
459. Atkinson Cynthia, Aslani Farhad (2023-03)
     Performance of 3D Printed Columns Using Self-Sensing Cementitious Composites
460. Ravichandran Darssni, Giridhar Greeshma, Ramamurthy Vignesh, Prem Prabhat (2023-03)
     Influence of Test-Protocol on Determining the Rheological Properties of Cement-Pastes-Mixtures for Concrete 3D Printing
461. Luo Surong, Lin Qian, Xu Wei, Wang Dehui (2023-03)
     Effects of Interval Time and Interfacial Agents on the Mechanical Characteristics of Ultra-High-Toughness Cementitious Composites Under 3D Printed Technology
462. Talke Daniel, Saile Bettina, Meier Niklas, Herding Friedrich et al. (2023-03)
     Particle-Bed 3D Printing by Selective Cement-Activation:
     Influence of Process Parameters on Particle-Bed Density
463. Onanuga Babajide, Biernacki Joseph (2023-03)
     Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials
464. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-03)
     Influence of Limestone-Calcined-Clay-Cement on Properties of 3D Printed Concrete for Sustainable Construction
465. Li Mingyang, Liu Zhixin, Ho Jin, Wong Teck (2023-03)
     Improving Homogeneity of 3D Printed Cementitious Material-Distribution for Radial Tool-Path
466. Ma Guowei, Hu Tingyu, Wang Fang, Liu Xiongfei et al. (2023-02)
     Magnesium Phosphate Cement for Powder-Based 3D Concrete Printing:
     Systematic Evaluation and Optimization of Printability and Printing Quality
467. Chen Yu, Liang Minfei, Zhang Yu, Li Zhenming et al. (2023-02)
     Can Superabsorbent Polymers Be Used as Rheology-Modifiers for Cementitious Materials in the Context of 3D Concrete Printing
468. Tao Yaxin, Ren Qiang, Vantyghem Gieljan, Lesage Karel et al. (2023-02)
     Extending 3D Concrete Printing to Hard Rock Tunnel Linings:
     Adhesion of Fresh Cementitious Materials for Different Surface Inclinations
469. Ishida Takato, Nakada Kiyofumi (2023-02)
     Review of Rheology in Cement-Based Materials and Its Application to 3D Printing Using Concrete
470. Harbouz Ilhame, Yahia Ammar, Rozière Emmanuel, Loukili Ahmed (2023-02)
     Printing Quality-Control of Cement-Based Materials Under Flow and Rest-Conditions
471. Basha Shaik, Rehman Atta, Aziz Md, Kim Jung-Hoon (2023-02)
     Cement Composites with Carbon-Based Nanomaterials for 3D Concrete Printing Applications:
     A Review
472. Giwa Ilerioluwa, Game Daniel, Ahmed Hassan, Noorvand Hassan et al. (2023-02)
     Performance and Macrostructural Characterization of 3D Printed Steel-Fiber-Reinforced Cementitious Materials
473. Pang Zhiming, Lu Cong, Li Baoshan, Wang Jiajie (2023-02)
     A Multi-Scale Model for Quantifying Fiber-Orientation Effects on the Tensile Properties of 3D Printed Engineered Cementitious Composites
474. Liu Qiang, Jiang Quan, Zhou Zhenhua, Xin Jie et al. (2023-02)
     The Printable and Hardened Properties of Nano-Calcium Carbonate with Modified Polypropylene-Fibers for Cement-Based 3D Printing
475. Gangotra Ankita, Gado Emanuela, Lewis Joanna (2023-02)
     3D Printing Has Untapped Potential for Climate Mitigation in the Cement Sector
476. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2023-02)
     Development of a Calcium Sulfoaluminate-Portland Cement Binary System for Twin-Pipe 3D Concrete Printing
477. Ogura Hiroki, Yamamoto Shinya, Abe Hiroyuki (2023-01)
     Mechanical Properties of Fiber-Reinforced Cementitious Composites Manufactured Using 3D Printing Technology
478. Sambucci Matteo, Biblioteca Ilario, Valente Marco (2023-01)
     Life Cycle Assessment (LCA) of 3D Concrete Printing and Casting Processes for Cementitious Materials Incorporating Ground Waste Tire Rubber
479. Kosson Michael, Brown Lesa, Sanchez Florence (2023-01)
     Nano-Mechanical Characterization of 3D Printed Cement-Pastes
480. Fan Lei, Ji Xiaohan, Wu Chengtao, Zhang Wang et al. (2023-01)
     Unlocking Toughness in 3D-Printed Cement Through Bio-Inspired Designs:
     Current Status and Future Perspectives
481. Diniz Hugo, Martinelli Antônio, Cabral Kleber, Ferreira Ruan et al. (2023-01)
     Synergistic Effects of the Use of Metakaolin, Sand and Water on the Properties of Cementitious Composites for 3D Printing
482. Dams Barrie, Chen Binling, Shepherd Paul, Ball Richard (2023-01)
     Development of Cementitious Mortars for Aerial Additive Manufacturing
483. Matos Ana, Emiroğlu Mehmet, Subaşı Serkan, Maraşlı Muhammed et al. (2023-01)
     Architectonic Cement-Based Composites 3D Printing
484. Jesus Manuel, Costa Joana, Teixeira João, Pessoa Ana Sofia et al. (2023-01)
     Use of Waste Materials to Reduce Cement and Natural Aggregates in 3D Printing Mortars
485. Zhu Lingli, Yao Jie, Zhao Yu, Ruan Wenqiang et al. (2022-12)
     Effects of Composite Cementation System on Rheological and Working Performances of Fresh 3D Printable Engineered Cementitious Composites
486. Břoušek Josef, Petr Tomas, Mendřický Radomír (2022-12)
     Displacement-Analysis of Large-Scale Robotic Arm for Printing Cement-Mortar Using Photogrammetry
487. Chun Seung-Yeop, Kim Su-jin, Kim Woon-Gi, Lee Geumyeon et al. (2022-12)
     Powder-Bed-Based 3D Printing with Cement for Sustainable Casting
488. Peng Yiming, Unluer Cise (2022-12)
     Development of Alternative Cementitious Binders for 3D Printing Applications:
     A Critical Review of Progress, Advantages and Challenges
489. Jiang Fangming, Long Xiong, Tian Likang, Tan Yan et al. (2022-12)
     Tensile Strain-Hardening Cementitious Composites and Its Practical Exploration Without Reinforcement:
     A Review
490. Sadakorn Wannapol, Prasertsuk Santirak, Prasittisopin Lapyote (2022-12)
     3D Cement Printing:
     DFMA Guideline of Patterned Load-Bearing Walls for Small Residential Units
491. Tinoco Matheus, Gouvêa Lucas, Cássia Magalhães Martins Karenn, Toledo Filho Romildo et al. (2022-12)
     The Use of Rice Husk Particles to Adjust the Rheological Properties of 3D Printable Cementitious Composites Through Water Sorption
492. Li Zihan, Liu Huanbao, Cheng Xiang, Nie Ping et al. (2022-12)
     Improvement of 3D Printing Cement-Based Material-Process:
     Parameter Experiment and Analysis
493. Qing Longbang, Sun Honglei, Zhang Yuebo, Mu Ru et al. (2022-12)
     Research Progress on Aligned Fiber-Reinforced Cement-Based Composites
494. Robayo-Salazar Rafael, Gutiérrez Ruby, Villaquirán-Caicedo Mónica, Delvasto Arjona Silvio (2022-12)
     3D Printing with Cementitious Materials:
     Challenges and Opportunities for the Construction Sector
495. Miranda Luiza, Marchesini Flávio, Lesage Karel, Schutter Geert (2022-12)
     The Evolution of the Rheological Behavior of Hydrating Cement Systems:
     Combining Constitutive Modeling with Rheometry, Calorimetry and Mechanical Analyses
496. Srinivas Dodda, Dey Dhrutiman, Panda Biranchi, Sitharam Thallak (2022-12)
     Printability, Thermal and Compressive Strength Properties of Cementitious Materials:
     A Comparative Study with Silica-Fume and Limestone
497. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2022-12)
     Assessing Printing Synergism in a Dual 3D Printing System for Ultra-High-Performance Concrete In-Process Reinforced Cementitious Composite
498. Zhou Yiyi, Jiang Dan, Sharma Rahul, Xie Yi et al. (2022-11)
     Enhancement of 3D Printed Cementitious Composite by Short Fibers:
     A Review
499. Wang Lining, Aslani Farhad (2022-11)
     Structural Performance of Reinforced Concrete Beams with 3D Printed Cement-Based Sensor Embedded and Self-Sensing Cementitious Composites
500. Lu Bing, Li Hongliang, Li Mingyang, Wong Teck et al. (2022-11)
     Mechanism and Design of Fluid Catalytic Cracking Ash-Blended Cementitious Composites for High-Performance Printing
501. Melichar Jindřich, Žižková Nikol, Brožovský Jiří, Mészárosová Lenka et al. (2022-11)
     Study of the Interaction of Cement-Based Materials for 3D Printing with Fly-Ash and Superabsorbent Polymers
502. Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping et al. (2022-11)
     Flow and Deformation Behaviors of Cementitious Materials Through Nozzles with Different Geometric Parameters:
     Experimental and Numerical Approaches
503. Zhao Yu, Yang Guang, Zhu Lingli, Ding Yahong et al. (2022-10)
     Effects of Rheological Properties and Printing Speed on Molding Accuracy of 3D Printing Basalt-Fiber Cementitious Materials
504. Nguyen Vuong, Liu Junli, Li Shuai, Zhang Guomin et al. (2022-10)
     Modelling of 3D Printed Bio-Inspired Bouligand Cementitious Structures Reinforced with Steel-Fibers
505. Liu Qiang, Jiang Quan, Huang Mojia, Xin Jie et al. (2022-10)
     The Fresh and Hardened Properties of 3D Printing Cement-Base Materials with Self-Cleaning Nano-TiO2:
     An Exploratory Study
506. Che Yujun, Yang Huashan (2022-10)
     Hydration Products, Pore-Structure, and Compressive Strength of Extrusion-Based 3D Printed Cement-Pastes Containing Nano-Calcium-Carbonate
507. Yang Rijiao, Zhu Yi, Lan Yan, Zeng Qiang et al. (2022-10)
     Differences in Micro Grain & Fiber-Distributions Between Matrix and Inter-Layer of Cementitious Filaments Affected by Extrusion-Molding
508. Diwan Anushree, Patel Shiv, Pal Ankit, Dwivedi Ashutosh et al. (2022-10)
     Flow Characteristics of Cement Mortar with Varied Silica-Fume for Additive Construction
509. Chen Yu, Toosumran Nuttapon, Chehab Noura, Spanjers Henri et al. (2022-10)
     Feasibility Study of Using Desalination-Brine to Control the Stiffness and Early-Age Hydration of 3D Printable Cementitious Materials
510. Qu Zhengyao, Geng Guoqing (2022-10)
     Thermal Response Gelatin-Cement-Composite for 3D Concrete Printing
511. Liu Junli, Tran Jonathan (2022-09)
     Experimental Study on 3D-Printed Cementitious Materials Containing Surface-Modified Recycled Crumb-Rubber
512. Li Mingyang, Weng Yiwei, Liu Zhixin, Zhang Dong et al. (2022-09)
     Optimizing of Chemical Admixtures for 3D Printable Cementitious Materials by Central Composite Design
513. Wang Li, Lin Wenyu, Ma Hui, Li Dexin et al. (2022-09)
     Mechanical and Microstructural Properties of 3D Printed Aluminate-Cement-Based Composite Exposed to Elevated Temperatures
514. Boddepalli Uday, Panda Biranchi, Gandhi Indu (2022-09)
     Rheology and Printability of Portland-Cement-Based Materials:
     A Review
515. Dey Dhrutiman, Srinivas Dodda, Boddepalli Uday, Panda Biranchi et al. (2022-09)
     3D Printability of Ternary-Portland-Cement Mixes Containing Fly-Ash and Limestone
516. Puzatova (nee Sharanova) Anastasiia, Sokolnikova S., Dmitrieva Maria (2022-09)
     Polymer-Cement Concrete Based on Polyvinyl-Acetate Dispersion for Construction 3D Printing
517. Zhang Yuanyuan, Pan Pan, Li Wenqiang, Dong Biqin et al. (2022-09)
     Freeform Embedded Printing of Vasculature in Cementitious Materials for Healing-Agent Transport
518. Engelhard Michael, Kalytta-Mewesand Andreas, Volkmer Dirk (2022-09)
     Testing Methods for Deformation Characterization on 3D Printed Carbon Fiber-Reinforced Cementitious Composites
519. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2022-09)
     Rheological and Strength-Characterisation of Limestone-Calcined-Clay-Cement 3D Printed Concrete
520. Game Daniel, Giwa Ilerioluwa, Ahmed Hassan, Noorvand Hassan et al. (2022-09)
     Development of Ultra-High-Performance Engineered Cementitious Composites for 3D Printing Applications
521. Zafar Muhammad, Bakhshi Amir, Hojati Maryam (2022-09)
     Toward 3D Printable Engineered Cementitious Composites:
     Mix-Design Proportioning, Flowability, and Mechanical Performance
522. Jenny Ercan, Mitterberger Daniela, Lloret-Fritschi Ena, Vasey Lauren et al. (2022-09)
     Robotic On-Site Adaptive Thin-Layer Printing:
     Challenges and Workflow for Design and Fabrication of Bespoke Cementitious Plasterwork at Full-Architectural-Scale
523. Aydin Eylül, Kara Burhan, Bundur Zeynep, Özyurt Nilüfer et al. (2022-08)
     A Comparative Evaluation of Sepiolite and Nano-Montmorillonite on the Rheology of Cementitious Materials for 3D Printing
524. Duan Zhenhua, Li Lei, Yao Qinye, Zou Shuai et al. (2022-08)
     Effect of Metakaolin on the Fresh and Hardened Properties of 3D Printed Cementitious Composite
525. Araújo Rísia, Martinelli Antônio, Cabral Kleber, Dantas André et al. (2022-08)
     Thermal Performance of Cement-Leca Composites for 3D Printing
526. Riegger Felix, Zäh Michael (2022-08)
     Additive Manufacturing of Steel-Reinforcements:
     Integration of WAAM Reinforcements in Particle-Bed 3D Printing with Selective Cement-Paste-Intrusion
527. Zhou Wen, McGee Wesley, Zhu He, Gökçe H. et al. (2022-08)
     Time-Dependent Fresh Properties Characterization of 3D Printing Engineered Cementitious Composites:
     On the Evaluation of Buildability
528. Boukhelf Fouad, Sebaibi Nassim, Boutouil Mohamed, Yoris-Nobile Adrian et al. (2022-07)
     On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing:
     Long-Term Interactions of Cementitious Materials in the Marine Environment
529. Liu Junli, Setunge Sujeeva, Tran Jonathan (2022-07)
     3D Concrete Printing with Cement-Coated Recycled Crumb Rubber:
     Compressive and Microstructural Properties
530. Zhang Hongping, Liu Yaling, Cheng Zhi, Zhao Zhiyi (2022-07)
     Effect of Layering Molding Process on Strength of 3D Printed Composite Cement-Based Materials
531. Yoris-Nobile Adrian, Lizasoain-Arteaga Esther, Slebi-Acevedo Carlos, Blanco-Fernandez Elena et al. (2022-07)
     Life-Cycle-Assessment and Multi-Criteria Decision-Making-Analysis to Determine the Performance of 3D Printed Cement Mortars and Geopolymers
532. Zhu Binrong, Pan Jinlong, Li Junrui, Wang Penghui et al. (2022-07)
     Relationship Between Microstructure and Strain-Hardening Behavior of 3D Printed Engineered Cementitious Composites
533. Čítek David, Rehacek Stanislav, Dobias Daniel (2022-07)
     Experimental Research on 3D Printed Construction from Cement-Based Composites
534. Yu Shiwei, Sanjayan Jay, Du Hongjian (2022-07)
     Effects of Cement Mortar Characteristics on Aggregate-Bed 3D Concrete Printing
535. Singh Amardeep, Chen Zhiyuan, Duan Zhenhua, Li Lei (2022-07)
     Utilization Potential of Steel-Fibers in 3D Printed Functionally Graded Cementitious Composite:
     An Experimental Approach
536. Hynek Estelle, Bulteel David, Urquizar Antoine, Rémond Sébastien (2022-06)
     Formulation and Characterization of a Low-Carbon Impact Cementitious Ink for 3D Printing
537. Ghantous Rita, Valadez-Carranza Yvette, Reese Steven, Weiss William (2022-06)
     Impact of Drying of 3D Printed Cementitious Pastes on Their Degree of Hydration
538. Harbouz Ilhame, Yahia Ammar, Rozière Emmanuel, Loukili Ahmed (2022-06)
     Printability-Assessment of Cement-Based Materials Using Uniaxial Compression-Test
539. Reißig Silvia, Nerella Venkatesh, Mechtcherine Viktor (2022-06)
     Material-Design and Rheological Behavior of Sustainable Cement-Based Materials in the Context of 3D Printing
540. Marcucci Andrea, Kompella Sriram, Monte Francesco, Levi Marinella et al. (2022-06)
     Early-Age Shear and Tensile Fracture Properties of 3D Printable Cementitious Mortar to Assess Printability Window
541. Rusike Rutendo, Sataya Michael, Marsh Alastair, Cavalaro Sergio et al. (2022-06)
     Accelerating Early-Age Properties of Ultra-Low Clinker Cements for Extrusion-Based 3D Printing
542. Mezhov Alexander, Robens-Radermacher Annika, Zhang Kun, Kühne Hans-Carsten et al. (2022-06)
     Temperature Impact on the Structural Build-Up of Cementitious Materials:
     Experimental and Modelling Study
543. Nishijo Keisuke, Ohno Motohiro, Ishida Tetsuya (2022-06)
     Development of Cementitious Metamaterial with Compressive Strain-Hardening Characteristics
544. Wangler Timothy, Aguilar Sanchez Asel, Anton Ana-Maria, Dillenburger Benjamin et al. (2022-06)
     Two Year Exposure of 3D Printed Cementitious Columns in a High-Alpine Environment
545. Jacquet Yohan, Perrot Arnaud, Picandet Vincent (2022-06)
     Monitoring Strain Using Digital Image Correlation During Compressive and Tensile Loading:
     Assessment of Critical Strain of Cement-Based Materials Containing VMA
546. Herding Friedrich, Mai (née Dressler) Inka, Lowke Dirk (2022-06)
     Effect of Curing in Selective Cement-Activation
547. Putten Jolien, Smet M., Heede Philip, Schutter Geert et al. (2022-06)
     Influence of the Print Process on the Durability of Printed Cementitious Materials
548. Mai (née Dressler) Inka, Herding Friedrich, Lowke Dirk (2022-06)
     Evaluating the Effect of Methyl-Cellulose on Hardened State Properties in Selective Cement-Activation
549. Straßer Alexander, Matthäus Carla, Weger Daniel, Kränkel Thomas et al. (2022-06)
     Selective Paste-Intrusion:
     Stability of Cement-Paste Mixtures Towards Changing Ambient Temperature
550. Rodriguez Fabian, Lopez Cristian, Wang Yu, Olek Jan et al. (2022-06)
     Evaluation of Durability of 3D Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments
551. Nefs Karsten, Overmeir Anne, Salet Theo, Suiker Akke et al. (2022-06)
     Consistency of Mechanical Properties of 3D Printed Strain-Hardening Cementitious Composites Within One Printing System
552. Yuan Qiang, Xie Zonglin, Yao Hao, Huang Tingjie et al. (2022-06)
     Effect of Polyacrylamide on the Workability and Inter-Layer Interface Properties of 3D Printed Cementitious Materials
553. Dvorkin Leonid, Marchuk Vitaliy, Hager Izabela, Maroszek Marcin (2022-06)
     Design of Cement-Slag Concrete Composition for 3D Printing
554. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2022-06)
     Mitigating Early-Age Cracking in 3D Printed Concrete Using Fibers, Superabsorbent Polymers, Shrinkage Reducing Admixtures, B-CSA Cement and Curing Measures
555. Jin Yuan, Xu Jiabin, Li Yali, Zhao Zhihui et al. (2022-06)
     Rheological Properties, Shape Stability and Compressive Strength of 3D Printed Colored Cement Composites Modified by Needle-Like Pigment
556. Weger Daniel, Talke Daniel, Lowke Dirk, Henke Klaudius et al. (2022-06)
     Additive Manufacturing of Free-Formed Concrete Elements by Selective Binding with Calcium Silicate-Based Cements
557. Ghantous Rita, Valadez-Carranza Yvette, Reese Steven, Weiss William (2022-06)
     Drying Behavior of 3D Printed Cementitious Pastes Containing Cellulose-Nano-Crystals
558. Ren Chuangnan, Hua Dongliang, Bai Yonghui, Wu Shuang et al. (2022-06)
     Preparation and 3D Printing Building Application of Sulfoaluminate-Cementitious-Material Using Industrial Solid-Waste
559. Mohammad Abdul, Biernacki Joseph (2022-06)
     2D Stationary Computational Printing of Cement-Based Pastes
560. Danish Aamar, Khurshid Kiran, Mosaberpanah Mohammad, Ozbakkaloglu Togay et al. (2022-06)
     Micro-Structural Characterization, Driving Mechanisms, and Improvement-Strategies for Inter-Layer Bond Strength of Additive Manufactured Cementitious Composites:
     A Review
561. Roussel Nicolas, Buswell Richard, Ducoulombier Nicolas, Ivanova Irina et al. (2022-06)
     Assessing the Fresh Properties of Printable Cement-Based Materials:
     High-Potential Tests for Quality-Control
562. Matos Paulo, Zat Tuani, Corazza Kiara, Fensterseifer Emilia et al. (2022-05)
     Effect of TiO2 Nano-Particles on the Fresh Performance of 3D Printed Cementitious Materials
563. Xu Nuoyan, Qian Ye, Yu Jing, Leung Christopher (2022-05)
     Tensile Performance of 3D Printed Strain-Hardening Cementitious Composites Considering Material-Parameters, Nozzle-Size and Printing-Pattern
564. Geng Zifan, Pan Hao, Zuo Wenqiang, She Wei (2022-05)
     Functionally Graded Lightweight Cement-Based Composites with Outstanding Mechanical Performances via Additive Manufacturing
565. Wijaya Ignasius, Kreiger Eric, Masud Arif (2022-05)
     An Elastic‐Inelastic Model and Embedded Bounce‐Back-Control for Layered Printing with Cementitious Materials
566. Ramakrishnan Sayanthan, Kanagasuntharam Sasitharan, Sanjayan Jay (2022-05)
     In-Line Activation of Cementitious Materials for 3D Concrete Printing
567. Ivaniuk Egor, Eichenauer Martin, Tošić Zlata, Müller Steffen et al. (2022-05)
     3D Printing and Assembling of Frame Modules Using Printable Strain-Hardening Cement-Based Composites
568. Lee Jin, Kim Jae (2022-05)
     Matric-Suction of Fine Sand and Its Effect on the Shape Stability of 3D Printed Cement Mortar
569. Zhao Zhihui, Chen Mingxu, Jin Yuan, Lu Lingchao et al. (2022-05)
     Rheology-Control Towards 3D Printed Magnesium-Potassium-Phosphate-Cement Composites
570. Saruhan Vedat, Keskinateş Muhammer, Felekoğlu Kamile, Felekoğlu Burak (2022-05)
     Effect of Fiber-Reinforcement on Extrudability and Buildability of Mineral-Additive-Modified Portland-Cement Mortars:
     A Rheometer-Based Simulation-Analysis
571. Barbosa Marcella, Anjos Marcos, Cabral Kleber, Souza Dias Leonardo (2022-05)
     Development of Composites for 3D Printing with Reduced Cement Consumption
572. Aslani Farhad, Dale Ryan, Hamidi Fatemeh, Valizadeh Afsaneh (2022-05)
     Mechanical and Shrinkage Performance of 3D Printed Rubberised Engineered Cementitious Composites
573. Yang Rijiao, Zeng Qiang, Peng Yu, Wang Hailong et al. (2022-05)
     Anomalous Matrix and Inter-Layer Pore-Structure of 3D Printed Fiber-Reinforced Cementitious Composites
574. Xu Zhuoyue, Zhang Dawang, Li Hui, Sun Xuemei et al. (2022-05)
     Effect of FA and GGBFS on Compressive Strength, Rheology, and Printing Properties of Cement-Based 3D Printing Material
575. Samad Nur, Abdullah Siti, Ibrahim Mustaffa, Shahidan Shahiron et al. (2022-05)
     Initial Properties of 3D Printing Concrete Using Rice-Husk-Ash as Partial Cement Replacement
576. Moini Mohamadreza, Olek Jan, Zavattieri Pablo, Youngblood Jeffrey (2022-04)
     Early-Age Buildability-Rheological Properties Relationship in Additively Manufactured Cement-Paste Hollow Cylinders
577. Klyuev Sergey, Klyuev Alexander, Fediuk Roman, Ageeva Marina et al. (2022-04)
     Fresh and Mechanical Properties of Low-Cement Mortars for 3D Printing
578. Zhou Wen, Zhang Yamei, Ma Lei, Li Victor (2022-04)
     Influence of Printing Parameters on 3D Printing Engineered Cementitious Composites
579. Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2022-04)
     3D Printing of Cement-Based Materials with Adapted Buildability
580. Wang Lining, Aslani Farhad, Mukherjee Abhijit (2022-04)
     Development of 3D Printable Self-Sensing Cementitious Composites
581. Ennab Lena, Dixit Manish, Birgisson Bjorn, Kumar Pranav (2022-04)
     Comparative Life Cycle Assessment of Large-Scale 3D Printing Utilizing Kaolinite-Based Calcium-Sulfoaluminate-Cement Concrete and Conventional Construction
582. Tinoco Matheus, Mendonça Érica, Fernandez Letízia, Caldas Lucas et al. (2022-04)
     Life Cycle Assessment and Environmental Sustainability of Cementitious Materials for 3D Concrete Printing:
     A Systematic Literature Review
583. Wang Huan, Tian Xinchen, Wei Huixian, Dai Xueyan et al. (2022-04)
     Effects of Redispersible Latex-Powder on the Performance of 3D Printing Cementitious Materials
584. Li Weihong, Chen Xuhao, Li Nan (2022-04)
     3D Printing of Fast Setting Basalt Fiber-Reinforced Cement-Based Materials
585. Fuente Albert, Blanco Ana, Galeote Eduardo, Cavalaro Sergio (2022-04)
     Structural Fiber-Reinforced Cement-Based Composite Designed for Particle-Bed 3D Printing Systems:
     Case Study Parque De Castilla Footbridge in Madrid
586. Chen Yu, Chang Ze, He Shan, Çopuroğlu Oğuzhan et al. (2022-04)
     Effect of Curing Methods During a Long Time-Gap Between Two Printing Sessions on the Inter-Layer Bonding of 3D Printed Cementitious Materials
587. Cao Xiangpeng, Yu Shiheng, Cui Hongzhi, Li Zongjin (2022-04)
     3D Printing Devices and Reinforcing Techniques for Extruded Cement-Based Materials:
     A Review
588. Nodehi Mehrab, Ozbakkaloglu Togay, Gholampour Aliakbar (2022-04)
     Effect of Supplementary Cementitious Materials on Properties of 3D Printed Conventional and Alkali-Activated Concrete:
     A Review
589. Mo Yixin, Xing Jianchun, Yue Songlin, Zhang Yamei et al. (2022-04)
     Dynamic Properties of 3D Printed Cement Mortar Based on Split Hopkinson Pressure Bar Testing
590. Liu Qiang, Jiang Quan, Huang Mojia, Xin Jie et al. (2022-03)
     Modifying Effect of Anionic Polyacrylamide Dose for Cement-Based 3DP Materials:
     Printability and Mechanical Performance Tests
591. Teixeira João, Schaefer Cecília, Maia Lino, Rangel Bárbara et al. (2022-03)
     Influence of Supplementary Cementitious Materials on Fresh Properties of 3D Printable Materials
592. Afarani Hajar, Moser Newell, Garboczi Edward, Esfahani Ebrahim et al. (2022-03)
     Print Fidelity Metrics for Additive Manufacturing of Cement-Based Materials
593. Chen Mingxu, Li Haisheng, Yang Lei, Wang Shoude et al. (2022-03)
     Rheology and Shape-Stability-Control of 3D Printed Calcium-Sulphoaluminate-Cement Composites Containing Paper-Milling-Sludge
594. Pan Tinghong, Jiang Yaqing, Ji Xuping (2022-03)
     Inter-Layer Bonding Investigation of 3D Printing Cementitious Materials with Fluidity-Retaining Polycarboxylate-Superplasticizer and High-Dispersion Polycarboxylate Superplasticizer
595. Pan Tinghong, Teng Huaijin, Liao Hengcheng, Jiang Yaqing et al. (2022-03)
     Effect of Shaping Plate Apparatus on Mechanical Properties of 3D Printed Cement-Based Materials:
     Experimental and Numerical Studies
596. Putten Jolien, Volder Melissa, Heede Philip, Deprez Maxim et al. (2022-03)
     Transport Properties of 3D Printed Cementitious Materials with Prolonged Time-Gap Between Successive Layers
597. Douba AlaEddin, Badjatya Palash, Kawashima Shiho (2022-03)
     Enhancing Carbonation and Strength of MgO Cement Through 3D Printing
598. Břoušek Josef, Petr Tomas, Beran Leoš, Myslivec Tomáš et al. (2022-03)
     Robotic Arm-Design, Development and Control for Printing Cement-Mixtures
599. Brooks Adam, He Yawen, Farzadnia Nima, Seyfimakrani Shayan et al. (2022-03)
     Incorporating PCM-Enabled Thermal Energy Storage into 3D Printable Cementitious Composites
600. Filho Fernando, Chen Yu, Çopuroğlu Oğuzhan (2022-03)
     Nano-Modification in Digital Manufacturing of Cementitious Composites
601. Mai (née Dressler) Inka, Lowke Dirk, Perrot Arnaud (2022-03)
     Fluid-Intrusion in Powder-Beds for Selective Cement-Activation:
     An Experimental and Analytical Study
602. Peerzada Abdul, Rangaraju Prasad, Roberts James, Biehl Adam (2022-03)
     Influence of External Vibration on the Gravitational Flow Characteristics of Cementitious Materials:
     A Perspective from Application in Additive Manufacturing
603. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-03)
     Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials:
     Correction
604. Ivaniuk Egor, Ivanova Irina, Sokolov Dmitrii, Tošić Zlata et al. (2022-02)
     Application-Driven Material-Design of Printable Strain-Hardening Cementitious Composites
605. Shao Lijing, Feng Pan, Zuo Wenqiang, Wang Haochuan et al. (2022-02)
     A Novel Method for Improving the Printability of Cement-Based Materials:
     Controlling the Releasing of Capsules Containing Chemical Admixtures
606. Harbouz Ilhame, Rozière Emmanuel, Yahia Ammar, Loukili Ahmed (2022-02)
     Printability-Assessment of Cement-Based Materials Based on Rheology, Hydration Kinetics, and Viscoelastic Properties
607. Overmeir Anne, Figueiredo Stefan, Šavija Branko, Bos Freek et al. (2022-02)
     Design and Analyses of Printable Strain-Hardening Cementitious Composites with Optimized Particle-Size-Distribution
608. Hojati Maryam, Li Zhanzhao, Memari Ali, Park Keunhyoung et al. (2022-01)
     3D Printable Quaternary-Cementitious-Materials Towards Sustainable Development:
     Mixture Design and Mechanical Properties
609. Roussel Nicolas, Lowke Dirk, Buswell Richard (2022-01)
     Digital Fabrication with Cement-Based Materials:
     The RILEM D.F.C. Technical Committee
610. Putten Jolien, Nerella Venkatesh, Mechtcherine Viktor, Hondt Mélody et al. (2022-01)
     Properties and Testing of Printed Cement-Based Materials in Hardened State
611. Buswell Richard, Bos Freek, Silva Wilson, Hack Norman et al. (2022-01)
     Digital Fabrication with Cement-Based Materials:
     Process Classification and Case Studies
612. Mechtcherine Viktor, Fataei Shirin, Bos Freek, Buswell Richard et al. (2022-01)
     Digital Fabrication with Cement-Based Materials:
     Underlying Physics
613. Wangler Timothy, Flatt Robert, Roussel Nicolas, Perrot Arnaud et al. (2022-01)
     Printable Cement-Based Materials:
     Fresh Properties Measurements and Control
614. Yang Huashan, Che Yujun (2022-01)
     Recycling of Aggregate Micro-Fines as a Partial Replacement for Fly-Ash in 3D Printing Cementitious Materials
615. Liu Chao, Xiong Yuanliang, Chen Yuning, Jia Lutao et al. (2022-01)
     Effect of Sulphoaluminate Cement on Fresh and Hardened Properties of 3D Printing Foamed Concrete
616. Geng Zifan, Wu Peipei, Pan Hao, Zheng Qi et al. (2022-01)
     Robust Layer Interface in Cement Additive Manufacturing via Silicate-Penetration and Precipitation
617. Sukontasukkul Piti, Panklum Kasidet, Maho Buchit, Banthia Nemkumar et al. (2021-12)
     Effect of Synthetic Micro-Fiber and Viscosity-Modifying-Agent on Layer Deformation, Viscosity, and Open-Time of Cement Mortar for 3D Printing Application
618. Zhou Jiehang, Lai Jianzhong, Du Longyu, Wu Kai et al. (2021-12)
     Effect of Directionally Distributed Steel-Fiber on Static and Dynamic Properties of 3D Printed Cementitious Composite
619. Wu Zixia, Xu Yading, Šavija Branko (2021-12)
     Mechanical Properties of Lightweight Cementitious Cellular Composites Incorporating Micro-Encapsulated Phase-Change-Material
620. Wanasinghe Dimuthu, Aslani Farhad, Ma Guowei (2021-12)
     Development of 3D Printable Cementitious Composite for Electromagnetic Interference Shielding
621. Min Kyung-Sung, Park Kwang-Min, Lee Bong-Chun, Roh Young-Sook (2021-12)
     Chloride Diffusion by Build Orientation of Cementitious Material-Based Binder-Jetting 3D Printing Mortar
622. Xiao Qiyuan, Long Guangcheng, Feng Ruiping, Zeng Xiaohui et al. (2021-12)
     Effect of Alternating Current Field on Rheology of Fresh Cement-Based-Pastes
623. Cai Jingming, Sheng Zhaoliang, Wang Xiaoyi, Fang Yizhi et al. (2021-12)
     Effect of Reinforcement-Configurations on the Flexural Behaviors of 3D Printed Fiber-Reinforced Cementitious Composite Beams
624. Kilic Ugur, Yang Yang, Ma Ji, Ozbulut Osman (2021-12)
     Rheological and Thermal Characterization of 3D Printable Lightweight Cementitious Composites with Fly-Ash-Cenospheres
625. Kompella Sriram, Monte Francesco, Cucchi Marco, Marcucci Andrea et al. (2021-12)
     A Methodology to Assess Early-Age Fracture Performance of 3D Printable Cementitious Mixes
626. Moini Mohamadreza, Olek Jan, Zavattieri Pablo, Youngblood Jeffrey (2021-12)
     Open-Span Printing Method for Assessment of Early-Age Deformations of Additively Manufactured Cement-Based Materials Using an Isosceles Triangle
627. Yao Hao, Xie Zonglin, Li Zemin, Huang Chuhan et al. (2021-11)
     The Relationship Between the Rheological Behavior and Inter-Layer Bonding Properties of 3D Printing Cementitious Materials with the Addition of Attapulgite
628. Rutzen Matthias, Schulz Michael, Moosburger-Will Judith, Lauff Philipp et al. (2021-11)
     3D Printing as an Automated Manufacturing Method for a Carbon-Fiber-Reinforced Cementitious Composite with Outstanding Flexural Strength (105 N/mm²)
629. Jin Yuan, Zhou Xiaolong, Chen Mingxu, Zhao Zhihui et al. (2021-11)
     High-Toughness 3D Printed White Portland-Cement-Based Materials with Glass-Fiber-Textile
630. Sun Xiaoyan, Zhou Jiawei, Wang Qun, Shi Jiangpeng et al. (2021-11)
     PVA-Fiber-Reinforced High-Strength Cementitious Composite for 3D Printing:
     Mechanical Properties and Durability
631. Liu Hanqiu, Egbe King-James, Wang Haipeng, Nazar Ali et al. (2021-11)
     A Numerical Study on 3D Printed Cementitious Composites Mixes Subjected to Axial Compression
632. Chen Yu, He Shan, Gan Yidong, Çopuroğlu Oğuzhan et al. (2021-11)
     A Review of Printing-Strategies, Sustainable Cementitious Materials and Characterization Methods in the Context of Extrusion-Based 3D Concrete Printing
633. Pham Luong, Panda Biranchi, Tran Jonathan (2021-11)
     Fresh and Hardened Properties of 3D Printable Polymer-Fiber-Reinforced High-Performance Cementitious Composite
634. Zhang Hongping, Wang Jianhong, Liu Yaling, Zhang Xiaoshuang et al. (2021-11)
     Effect of Processing Parameters on the Printing Quality of 3D Printed Composite Cement-Based Materials
635. Souza Marcelo, Ferreira Igor, Moraes Elisângela, Senff Luciano et al. (2021-11)
     Role of Chemical Admixtures on 3D Printed Portland Cement:
     Assessing Rheology and Buildability
636. He Lewei, Tan Jolyn, Chow Wai, Li Hua et al. (2021-11)
     Design of Novel Nozzles for Higher Inter-Layer Strength of 3D Printed Cement-Paste
637. Marczyk Joanna, Ziejewska Celina, Gądek Szymon, Korniejenko Kinga et al. (2021-11)
     Hybrid Materials Based on Fly-Ash, Metakaolin, and Cement for 3D Printing
638. Deshmukh Aparna, Heintzkill Reed, Huerta Rosalba, Sobolev Konstantin (2021-11)
     Rheological Response of Magnetorheological Cementitious Inks Tuned for Active Control in Digital Construction
639. Wang Xiangyu, Khalil Abdullah, Celik Kemal (2021-11)
     Three-Dimensional Printability of White-Portland-Cement Containing Ceno-Spheres
640. Nair Sooraj, Neithalath Narayanan (2021-11)
     Flow Characterization of Three-Dimensional Printable Cementitious Pastes During Extrusion Using Capillary-Rheometry
641. Yuan Qiang, Zuo Shenghao, Li Zemin, Shi Caijun et al. (2021-11)
     Optimizing Three-Dimensional Printing Binder Composed of Ordinary-Portland-Cement and Calcium-Sulfoaluminate-Cement with Retarders
642. Zhu He, Yu Kequan, McGee Wesley, Ng Tsz et al. (2021-11)
     Limestone-Calcined-Clay-Cement for Three-Dimensional Printed Engineered Cementitious Composites
643. Jacquet Yohan, Picandet Vincent, Perrot Arnaud (2021-11)
     Characterization of Tensile Behavior of Fresh Cementitious Materials
644. Li Zhijian, Ma Guowei, Wang Fang, Wang Li et al. (2021-10)
     Expansive Cementitious Materials to Improve Micro-Cable-Reinforcement Bond in 3D Concrete Printing
645. Dobrzanski James, Buswell Richard, Cavalaro Sergio, Kinnell Peter et al. (2021-09)
     Milling a Cement-Based 3D Printable Mortar in Its Green State Using a Ball-Nosed Cutter
646. Nassar Roz-Ud-Din, Soroushian Parviz, Balachandra Anagi, Nassar Shumayal et al. (2021-09)
     Evaluation of Refined Cement-Based Matrix Systems for Extrusion of Wood-Fiber Cement
647. Ge Zhi, Tawfek Abdullah, Zhang Hongzhi, Yang Yongwei et al. (2021-09)
     Influence of an Extrusion-Approach on the Fiber-Orientation and Mechanical Properties of Engineering Cementitious Composite
648. Mo Yixin, Yue Songlin, Zhou Qizhen, Feng Bowei et al. (2021-09)
     Dynamic Properties and Fractal Characteristics of 3D Printed Cement Mortar in SHPB-Test
649. Shahmirzadi Mohsen, Gholampour Aliakbar, Kashani Alireza, Ngo Tuan (2021-09)
     Shrinkage Behavior of Cementitious 3D Printing Materials:
     Effect of Temperature and Relative Humidity
650. Kompella Sriram, Marcucci Andrea, Monte Francesco, Bassani Andrea et al. (2021-09)
     A Study of Early-Age Shear Properties of 3D Printable Cementitious Mixes with Fiber-Reinforcements
651. Miranda Luiza, Lesage Karel, Schutter Geert (2021-09)
     Understanding the Structural Build-Up-Rate of Cementitious Materials for 3D Printing
652. Zhang Ping, Lu Xiao-jun (2021-09)
     Study on Bending Strength of Cementitious Composites Based on Fiber-Alignment
653. Zahabizadeh Behzad, Segundo Iran, Pereira João, Freitas Elisabete et al. (2021-08)
     Development of Photocatalytic 3D Printed Cementitious Mortars:
     Influence of the Curing, Spraying Time-Gaps and TiO2 Coating Rates
654. Rehman Asif, Sglavo Vincenzo (2021-08)
     3D Printing of Portland-Cement-Containing Bodies
655. Wang Yu, Jiang Yaqing, Pan Tinghong, Yin Kangting (2021-08)
     The Synergistic Effect of Ester-Ether Copolymerization Thixo-Tropic Superplasticizer and Nano-Clay on the Buildability of 3D Printable Cementitious Materials
656. Choi Se-Jin, Kim Ji-Hwan, Jeong Hyojin, Lee Ja-Sung et al. (2021-08)
     Simulated and Experimental Investigation of the Mechanical Properties and Solubility of 3D Printed Capsules for Self-Healing Cement Composites
657. Zhang Yifan, Aslani Farhad (2021-08)
     Development of Fiber-Reinforced Engineered Cementitious Composite Using Polyvinyl-Alcohol-Fiber and Activated Carbon-Powder for 3D Concrete Printing
658. Putten Jolien, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-08)
     Development of 3D Printable Cementitious Composites with the Incorporation of Polypropylene Fibers
659. Che Yujun, Tang Shengwen, Yang Huashan, Li Weiwei et al. (2021-08)
     Influences of Air-Voids on the Performance of 3D Printing Cementitious Materials
660. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2021-08)
     In-Process Reinforcing Method:
     Dual 3D Printing Procedure for Ultra-High-Performance Concrete Reinforced Cementitious Composites
661. Chen Yu, He Shan, Zhang Yu, Wan Zhi et al. (2021-08)
     3D Printing of Calcined-Clay-Limestone-Based Cementitious Materials
662. Nodehi Mehrab, Asiabanpour Bahram, Omer Liam, Ozbakkaloglu Togay (2021-08)
     Material-Characterization of Diversity Aggregated Cementitious Materials Produced with a Modular Lightweight Additive Manufacturing Extrusion-System
663. Zhao Zhihui, Chen Mingxu, Zhong Xu, Huang Yongbo et al. (2021-07)
     Effects of Bentonite, Diatomite and Metakaolin on the Rheological Behavior of 3D Printed Magnesium-Potassium-Phosphate-Cement Composites
664. Wang Li, Ma Hui, Li Zhijian, Ma Guowei et al. (2021-07)
     Cementitious Composites Blending with High Belite-Sulfoaluminate and Medium-Heat Portland Cements for Large-Scale 3D Printing
665. Lim Taeheun, Kim Seonghoon, Jo Kanghee, Jo Ilguk et al. (2021-07)
     Early Hydration and Mechanical Strength of Calcite-Ettringite-Seeds-Added Cement-Mixture for 3D Printing
666. Yang Huashan, Che Yujun, Shi Mengyuan (2021-07)
     Influences of Calcium-Carbonate-Nano-Particles on the Workability and Strength of 3D Printing Cementitious Materials Containing Limestone-Powder
667. Nair Sooraj, Panda Subhashree, Tripathi Avinaya, Neithalath Narayanan (2021-06)
     Relating Print-Velocity and Extrusion-Characteristics of 3D Printable Cementitious Binders:
     Implications Towards Testing Methods
668. Sun Junbo, Aslani Farhad, Lu Jenny, Wang Lining et al. (2021-06)
     Fiber-Reinforced Lightweight Engineered Cementitious Composites for 3D Concrete Printing
669. Moini Mohamadreza, Baghaie Ahmadreza, Rodriguez Fabian, Zavattieri Pablo et al. (2021-06)
     Quantitative Microstructural Investigation of 3D Printed and Cast Cement-Pastes Using Micro-Computed Tomography- and Image-Analysis
670. Bakhshi Amir, Sedghi Reza, Hojati Maryam (2021-06)
     A Preliminary Study on the Mix-Design of 3D Printable Engineered Cementitious Composite
671. Sambucci Matteo, Valente Marco (2021-06)
     Influence of Waste-Tire-Rubber-Particles-Size on the Microstructural, Mechanical, and Acoustic Insulation Properties of 3D Printable Cement Mortars
672. Song Hongwei, Li Xinle (2021-05)
     An Overview on the Rheology, Mechanical Properties, Durability, 3D Printing, and Microstructural Performance of Nanomaterials in Cementitious Composites
673. Sun Junbo, Huang Yimiao, Aslani Farhad, Wang Xiangyu et al. (2021-05)
     Mechanical Enhancement for EMW-Absorbing Cementitious Material Using 3D Concrete Printing
674. Na Okpin, Kim Kangmin, Lee Hyunjoo, Lee Hyunseung (2021-05)
     Printability and Setting-Time of CSA Cement with Na2SiO3 and Gypsum for Binder-Jetting 3D Printing
675. Jenkins Morgan, Brand Alexander (2021-05)
     Aggregate Moisture-Content and Fresh Property-Control-Measures in Cementitious Mortars
676. Cuevas Villalobos Karla, Chougan Mehdi, Martin Falk, Ghaffar Seyed et al. (2021-05)
     3D Printable Lightweight Cementitious Composites with Incorporated Waste-Glass-Aggregates and Expanded Microspheres:
     Rheological, Thermal and Mechanical Properties
677. Zhang Hao, Zhu Liming, Zhang Fan, Yang Mijia (2021-04)
     Effect of Fiber Content and Alignment on the Mechanical Properties of 3D Printing Cementitious Composites
678. Brooks Adam, Zhou Hongyu (2021-04)
     Developing 3D Printable Lightweight Functional Cementitious Composite
679. Pott Ursula, Stephan Dietmar (2021-04)
     Penetration-Test as a Fast Method to Determine Yield-Stress and Structural Build-Up for 3D Printing of Cementitious Materials
680. Bos Freek, Kruger Jacques, Lucas Sandra, Zijl Gideon (2021-04)
     Juxtaposing Fresh Material-Characterisation-Methods for Buildability-Assessment of 3D Printable Cementitious Mortars
681. Zhu Binrong, Pan Jinlong, Zhou Zhenxin, Cai Jingming (2021-04)
     Mechanical Properties of Engineered Cementitious Composites Beams Fabricated by Extrusion-Based 3D
682. Shakor Pshtiwan, Gowripalan Nadarajah, Rasouli Habib (2021-03)
     Experimental and Numerical Analysis of 3D Printed Cement Mortar Specimens Using Inkjet 3DP
683. Kilic Ugur, Jiang Zhangfan, Ma Ji, Ozbulut Osman (2021-03)
     Printability Characterization of Graphene-Reinforced Cementitious Composites
684. Vojir Martin, Myslivec Tomáš, Petr Tomas, Břoušek Josef et al. (2021-03)
     A New Way to Design Software for Industrial Automation:
     3D Printer Cement Mixtures
685. Zhao Zhihui, Chen Mingxu, Xu Jiabin, Li Laibo et al. (2021-03)
     Mix-Design and Rheological Properties of Magnesium-Potassium-Phosphate Cement Composites Based on the 3D Printing-Extrusion-System
686. Rutzen Matthias, Lauff Philipp, Niedermeier Roland, Fischer Oliver et al. (2021-03)
     Influence of Fiber-Alignment on Pseudoductility and Micro-Cracking in a Cementitious Carbon-Fiber Composite Material
687. Sikora Paweł, Chougan Mehdi, Cuevas Villalobos Karla, Liebscher Marco et al. (2021-02)
     The Effects of Nano- and Micro-Sized Additives on 3D Printable Cementitious and Alkali-Activated Composites:
     A Review
688. Cui Peng, Wu Chun-ran, Chen Jie, Luo Fuming et al. (2021-02)
     Preparation of Magnesium-Oxysulfate Cement as a 3D Printing Material
689. Yu Kequan, McGee Wesley, Ng Tsz, Zhu He et al. (2021-02)
     3D Printable Engineered Cementitious Composites:
     Fresh and Hardened Properties
690. Long Wujian, Lin Can, Tao Jie-Lin, Ye Taohua et al. (2021-02)
     Printability and Particle-Packing of 3D Printable Limestone-Calcined-Clay-Cement Composites
691. Weng Yiwei, Li Mingyang, Zhang Dong, Tan Ming et al. (2021-02)
     Investigation of Inter-Layer Adhesion of 3D Printable Cementitious Material from the Aspect of Printing-Process
692. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Yuan Yong et al. (2021-02)
     Stiffening Control of Cement-Based Materials Using Accelerators in In-Line Mixing Processes:
     Possibilities and Challenges
693. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2021-02)
     Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials
694. Chen Yu, Çopuroğlu Oğuzhan, Rodríguez Claudia, Filho Fernando et al. (2021-02)
     Characterization of Air-Void Systems in 3D Printed Cementitious Materials Using Optical Image Scanning and X-Ray Computed Tomography
695. Xu Jiabin, Chen Mingxu, Zhao Zhihui, Li Laibo et al. (2021-01)
     Printability and Efflorescence-Control of Admixtures-Modified 3D Printed White Portland-Cement-Based Materials Based on the Response-Surface-Methodology
696. Wu Weiwei, Wang Zhongyu, Ding Shuang, Song Aiping (2021-01)
     Effect Research of Cement Block on Paste-Flow for 3D Cement Printing Based on an Improved Lattice-Boltzmann Method
697. Weger Daniel, Pierre Alexandre, Perrot Arnaud, Kränkel Thomas et al. (2021-01)
     Penetration of Cement-Pastes into Particle-Beds:
     A Comparison of Penetration Models
698. Demont Léo, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2021-01)
     Flow-Based Pultrusion of Continuous Fibers for Cement-Based Composite Material and Additive Manufacturing:
     Rheological and Technological Requirements
699. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-01)
     Early-Age Hydration, Rheology and Pumping Characteristics of CSA Cement-Based 3D Printable Concrete
700. Pan Tinghong, Jiang Yaqing, He Hui, Wang Yu et al. (2021-01)
     Effect of Structural Build-Up on Inter-Layer Bond Strength of 3D Printed Cement Mortars
701. Chen Mingxu, Yang Lei, Zheng Yan, Li Laibo et al. (2021-01)
     Rheological Behaviors and Structure Build-Up of 3D Printed Polypropylene- and Polyvinyl-Alcohol-Fiber-Reinforced Calcium-Sulphoaluminate-Cement Composites
702. Jacquet Yohan, Picandet Vincent, Rangeard Damien, Perrot Arnaud (2020-12)
     Gravity-Induced Flow to Characterize Rheological Properties of Printable Cement-Based Materials
703. Panda Biranchi, Sonat Cem, Yang En-Hua, Tan Ming et al. (2020-12)
     Use of Magnesium-Silicate-Hydrate (M-S-H) Cement Mixes in 3D Printing Applications
704. Gu Hai, Sun Jianhua, Zhang Jie, Xu Yuanyuan et al. (2020-12)
     Effect of Material-Ratio on the Performances in 3D Cement Printing and Its Optimization
705. Mohammed Alyaa, Saadi Nihad (2020-12)
     Ultra-High Early Strength Cementitious Grout Suitable for Additive Manufacturing Applications Fabricated by Using Graphene Oxide and Viscosity Modifying Agents
706. Putten Jolien, Snoeck Didier, Coensel R., Schutter Geert et al. (2020-12)
     Early-Age Shrinkage Phenomena of 3D Printed Cementitious Materials with Superabsorbent Polymers
707. Jones Scott (2020-11)
     Fused Filament-Fabrication Printer Modified to Dispense Cement-Paste for Concrete Additive Manufacturing Studies
708. Sterckx Peter, Walker Ian (2020-11)
     Modeling and Design-Optimization of Robotic Hoses for 3D Printing of Cement
709. Jacquet Yohan, Perrot Arnaud, Picandet Vincent (2020-11)
     Assessment of Asymmetrical Rheological Behavior of Cementitious Material for 3D Printing Application
710. Afarani Hajar, Carroll William, Garboczi Edward, Biernacki Joseph (2020-11)
     Designing 3D Printable Cementitious Materials with Gel-Forming Polymers
711. Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2020-11)
     Additive Manufacturing of Cementitious Materials by Selective Paste-Intrusion:
     Numerical Modeling of the Flow Using a 2D-Axisymmetric Phase-Field-Method
712. Mohan Manu, Rahul Attupurathu, Tittelboom Kim, Schutter Geert (2020-10)
     Rheological and Pumping Behavior of 3D Printable Cementitious Materials with Varying Aggregate Content
713. Zhang Yi, Jiang Zhengwu, Zhu Yanmei, Zhang Jie et al. (2020-10)
     Effects of Redispersible Polymer-Powders on the Structural Build-Up of 3D Printing Cement Paste with and without Hydroxypropyl-Methylcellulose
714. Guo Xiaolu, Yang Junyi, Xiong Guiyan (2020-09)
     Influence of Supplementary Cementitious Materials on Rheological Properties of 3D Printed Fly-Ash-Based Geopolymer
715. Šavija Branko (2020-09)
     Use of 3D Printing to Create Multi-Functional Cementitious Composites:
     Review, Challenges and Opportunities
716. Ortega Guillermo, Madrid Javier, Olsson Nils, Tenorio Ríos José (2020-08)
     The Application of 3D Printing Techniques in the Manufacturing of Cement-Based Construction Products and Experiences Based on the Assessment of Such Products
717. Sambucci Matteo, Marini Danilo, Sibai Abbas, Valente Marco (2020-08)
     Preliminary Mechanical Analysis of Rubber-Cement Composites Suitable for Additive Process Construction
718. Yang Huashan, Li Weiwei, Che Yujun (2020-08)
     3D Printing Cementitious Materials Containing Nano-CaCO3:
     Workability, Strength, and Microstructure
719. Valente Marco, Sambucci Matteo, Sibai Abbas, Musacchi Ettore (2020-07)
     Multi-Physics Analysis for Rubber-Cement Applications in Building and Architectural Fields:
     A Preliminary Analysis
720. Yu Shiwei, Du Hongjian, Sanjayan Jay (2020-07)
     Aggregate-Bed 3D Concrete Printing with Cement-Paste Binder
721. Chen Yu, Jansen Koen, Zhang Hongzhi, Rodríguez Claudia et al. (2020-07)
     Effect of Printing-Parameters on Inter-Layer Bond Strength of 3D Printed Limestone-Calcined-Clay-Based Cementitious Materials:
     An Experimental and Numerical Study
722. Li Zhanzhao, Hojati Maryam, Wu Zhengyu, Piasente Jonathon et al. (2020-07)
     Fresh and Hardened Properties of Extrusion-Based 3D Printed Cementitious Materials:
     A Review
723. Chang Ze, Schlangen Erik, Šavija Branko (2020-07)
     Extended-Lattice-Model to Simulate the Printing-Process of 3D Printed Cementitious Materials
724. Benamara Abdeslam, Pierre Alexandre, Kaci Abdelhak, Mélinge Yannick (2020-07)
     3D Printing of a Cement-Based Mortar in a Complex Fluid Suspension:
     Analytical Modeling and Experimental Tests
725. Casagrande Lorenzo, Esposito Laura, Menna Costantino, Asprone Domenico et al. (2020-07)
     Mechanical Characterization of Cement-Based Mortar Used in 3DCP Including Early-Age Creep Effects
726. Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2020-07)
     Use of the Chemical and Mineral Admixtures to Tailor the Rheology and the Green Strength of 3D Printing Cementitious Mixtures
727. Kurt Sibel, Atalay Yiğit, Aydın Ozan, Avcıoğlu Berrak et al. (2020-07)
     Design of Energy-Efficient White Portland Cement Mortars for Digital Fabrication
728. Sambucci Matteo, Valente Marco, Sibai Abbas, Marini Danilo et al. (2020-07)
     Rubber-Cement Composites for Additive Manufacturing:
     Physical, Mechanical and Thermo-Acoustic Characterization
729. Matthäus Carla, Back Daniel, Weger Daniel, Kränkel Thomas et al. (2020-07)
     Effect of Cement-Type and Limestone-Powder-Content on Extrudability of Lightweight Concrete
730. Shakor Pshtiwan, Nejadi Shami, Gowripalan Nadarajah (2020-07)
     Effect of Heat-Curing and E6-Glass Fiber-Reinforcement Addition on Powder-Based 3DP Cement Mortar
731. Odaglia Pietro, Voney Vera, Dillenburger Benjamin, Habert Guillaume (2020-07)
     Advances in Binder-Jet 3D Printing of Non-Cementitious Materials
732. McGee Wesley, Ng Tsz, Yu Kequan, Li Victor (2020-07)
     Extrusion Nozzle Shaping for Improved 3DP of Engineered Cementitious Composites (ECC-SHCC)
733. Suntharalingam Thadshajini, Nagaratnam Brabha, Poologanathan Keerthan, Hackney Phil et al. (2020-07)
     Effect of Polypropylene-Fibers on the Mechanical Properties of Extrudable Cementitious Material
734. Zongo Karim, Charrier Malo, Duval Corentin, Ouellet-Plamondon Claudiane (2020-07)
     Dynamic and Static Yield-Stress Determination of Cementitious Paste with Admixtures
735. Xu Yading, Schlangen Erik, Šavija Branko (2020-07)
     Auxetic Behavior of Cementitious Cellular Composites under Uniaxial Compression and Cyclic Loading
736. Varela Hugo, Barluenga Gonzalo, Palomar Irene (2020-07)
     Rheology Evaluation of Cement-Paste with Nano-Clay , Nano-Silica and Polymeric Admixtures for Digital Fabrication
737. Weger Daniel, Kim Heejeong, Talke Daniel, Henke Klaudius et al. (2020-07)
     Lightweight Concrete 3D Printing by Selective Cement-Activation:
     Investigation of Thermal Conductivity, Strength and Water-Distribution
738. Dedenis Marie, Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud et al. (2020-07)
     Effect of Metakaolin, Fly-Ash and Polypropylene-Fibers on Fresh and Rheological Properties of 3D Printing Based Cement Materials
739. Jacquet Yohan, Picandet Vincent, Rangeard Damien, Perrot Arnaud (2020-07)
     Gravity-Driven Tests to Assess Mechanical Properties of Printable Cement-Based Materials at Fresh State
740. Figueiredo Stefan, Overmeir Anne, Nefs Karsten, Schlangen Erik et al. (2020-07)
     Quality-Assessment of Printable Strain-Hardening Cementitious Composites Manufactured in Two Different Printing Facilities
741. Chen Yu, Rodríguez Claudia, Li Zhenming, Chen Boyu et al. (2020-07)
     Effect of Different Grade Levels of Calcined Clays on Fresh and Hardened Properties of Ternary-Blended Cementitious Materials for 3D Printing
742. He Lewei, Chow Wai, Li Hua (2020-06)
     Effects of Inter-Layer Notch and Shear Stress on Inter-Layer Strength of 3D Printed Cement-Paste
743. Yuan Qiang, Zhou Dajun, Huang Hai, Peng Jianwei et al. (2020-06)
     Structural Build-Up, Hydration and Strength Development of Cement-Based Materials with Accelerators
744. Kim Seonghoon, Kim Taewook, Kim Buyoung, Kim Hong-dae et al. (2020-06)
     Early Hydration and Hardening of OPC-CSA Blends for Cementitious Structure of 3D Printing
745. Hosseini Ehsan, Zakertabrizi Mohammad, Korayem Asghar, Zaker Zafar et al. (2020-06)
     Orbital Overlapping Through Induction Bonding Overcomes the Intrinsic Delamination of 3D Printed Cementitious Binders
746. Putten Jolien, Azima M., Heede Philip, Mullem T. et al. (2020-06)
     Neutron-Radiography to Study the Water-Ingress via the Inter-Layer of 3D Printed Cementitious Materials for Continuous Layering
747. Fratello Virginia, Rael Ronald (2020-05)
     Innovating Materials for Large-Scale Additive Manufacturing:
     Salt, Soil, Cement and Chardonnay
748. Lowke Dirk, Talke Daniel, Mai (née Dressler) Inka, Weger Daniel et al. (2020-05)
     Particle-Bed 3D Printing by Selective Cement-Activation:
     Applications, Material and Process Technology
749. Claßen Martin, Ungermann Jan, Sharma Rahul (2020-05)
     Additive Manufacturing of Reinforced Concrete:
     Development of a 3D Printing Technology for Cementitious Composites with Metallic Reinforcement
750. Nair Sooraj, Panda Subhashree, Santhanam Manu, Sant Gaurav et al. (2020-05)
     A Critical Examination of the Influence of Material-Characteristics and Extruder-Geometry on 3D Printing of Cementitious Binders
751. Muthukrishnan Shravan, Kua Harn, Yu Ling, Chung Jacky (2020-05)
     Fresh Properties of Cementitious Materials Containing Rice-Husk-Ash for Construction 3D Printing
752. Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2020-05)
     Effectiveness of the Rheometric Methods to Evaluate the Build-Up of Cementitious Mortars Used for 3D Printing
753. Vishruthi M., Raghavendra S., Ravi Teja Y., Anand K. (2020-05)
     Evaluation of Cementitious Mixes for Printing
754. Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2020-05)
     Mechanical Behavior of Printed Strain-Hardening Cementitious Composites
755. Albar Abdulrahman, Chougan Mehdi, Kheetan Mazen, Swash Mohammad et al. (2020-04)
     Effective Extrusion-Based 3D Printing System Design for Cementitious-Based Materials
756. Liu Zhixin, Li Mingyang, Tay Yi, Weng Yiwei et al. (2020-04)
     Rotation-Nozzle and Numerical Simulation of Mass-Distribution at Corners in 3D Cementitious Material-Printing
757. Ducoulombier Nicolas, Demont Léo, Chateau Camille, Bornert Michel et al. (2020-04)
     Additive Manufacturing of Anisotropic Concrete:
     A Flow-Based Pultrusion of Continuous Fibers in a Cementitious Matrix
758. Chen Mingxu, Yang Lei, Zheng Yan, Huang Yongbo et al. (2020-04)
     Yield-Stress and Thixotropy-Control of 3D Printed Calcium-Sulfoaluminate Cement Composites with Metakaolin Related to Structural Build-Up
759. Xu Yading, Zhang Hongzhi, Schlangen Erik, Luković Mladena et al. (2020-04)
     Cementitious Cellular Composites with Auxetic Behavior
760. Li Victor, Bos Freek, Yu Kequan, McGee Wesley et al. (2020-04)
     On the Emergence of 3D Printable Engineered, Strain-Hardening Cementitious Composites
761. Liu Zhixin, Li Mingyang, Weng Yiwei, Qian Ye et al. (2020-03)
     Modelling- and Parameter-Optimization for Filament-Deformation in 3D Cementitious Material-Printing Using Support-Vector-Machine
762. Shahsavari Rouzbeh, Hwang Sung (2020-03)
     Bio-Iinspired Cementitious Materials:
     Main Strategies, Progress, and Applications
763. Chen Yu, Figueiredo Stefan, Li Zhenming, Chang Ze et al. (2020-03)
     Improving Printability of Limestone-Calcined-Clay-Based Cementitious Materials by Using Viscosity-Modifying Admixture
764. Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
     Extrusion-Based Additive Manufacturing with Cement-Based Materials:
     Production Steps, Processes, and Their Underlying Physics
765. Vergara Luis, Colorado Henry (2020-03)
     Additive Manufacturing of Portland Cement-Pastes with Additions of Kaolin, Superplastificant and Calcium-Carbonate
766. Manikandan Karthick, Wi Kwangwoo, Zhang Xiao, Wang Kejin et al. (2020-03)
     Characterizing Cement Mixtures for Concrete 3D Printing
767. Jo Jun, Jo Byung, Cho Woohyun, Kim Jung-Hoon (2020-03)
     Development of a 3D Printer for Concrete Structures:
     Laboratory Testing of Cementitious Materials
768. Vergara Luis, Colorado Henry (2020-02)
     Portland 3D Printing of Portland-Cement-Pastes with Additions of Kaolin, Superplastificant, and Calcium-Carbonate
769. Pott Ursula, Jakob Cordula, Jansen Daniel, Neubauer Jürgen et al. (2020-02)
     Investigation of the Incompatibilities of Cement and Superplasticizers and Their Influence on the Rheological Behavior
770. Ma Guowei, Salman Nazar, Wang Li, Wang Fang (2020-02)
     A Novel Additive Mortar Leveraging Internal Curing for Enhancing Inter-Layer Bonding of Cementitious Composite for 3D Printing
771. Kosson Michael, Brown Lesa, Sanchez Florence (2020-01)
     Early-Age Performance of 3D Printed Carbon-Nano-Fiber and Carbon Micro-Fiber Cement Composites
772. Foteinopoulos Panagis, Esnault Vivien, Komineas George, Papacharalampopoulos Alexios et al. (2020-01)
     Cement-Based Additive Manufacturing:
     Experimental Investigation of Process Quality
773. Chen Mingxu, Liu Bo, Li Laibo, Cao Lidong et al. (2020-01)
     Rheological Parameters, Thixotropy and Creep of 3D Printed Calcium-Sulfoaluminate-Cement Composites Modified by Bentonite
774. Rahul Attupurathu, Sharma Abhishek, Santhanam Manu (2020-01)
     A Desorptivity-Based Approach for the Assessment of Phase Separation During Extrusion of Cementitious Materials
775. Ivanova Irina, Mechtcherine Viktor (2020-01)
     Possibilities and Challenges of Constant Shear-Rate-Test for Evaluation of Structural Build-Up-Rate of Cementitious Materials
776. Lafhaj Zoubeir, Rabenantoandro Andry, Moussaoui Soufiane, Dakhli Zakaria et al. (2019-12)
     Experimental Approach for Printability-Assessment:
     Toward a Practical Decision-Making Framework of Printability for Cementitious Materials
777. Suntharalingam Thadshajini, Nagaratnam Brabha, Poologanathan Keerthan, Hackney Phil et al. (2019-12)
     Effect of Polypropylene-Fibers on the Workability Parameters of Extrudable Cementitious Materials
778. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Sanjayan Jay (2019-12)
     Dimensional Accuracy, Flowability, Wettability, and Porosity in Inkjet 3DP for Gypsum and Cement Mortar Materials
779. Chen Mingxu, Li Laibo, Wang Jiaao, Huang Yongbo et al. (2019-10)
     Rheological Parameters and Building Time of 3D Printing Sulphoaluminate-Cement-Paste Modified by Retarder and Diatomite
780. Albar Abdulrahman, Swash Mohammad, Ghaffar Seyed (2019-10)
     The Design and Development of an Extrusion-System for 3D Printing Cementitious Materials
781. Yeon Jaeheum (2019-10)
     Short-Term Deformability of Three-Dimensional Printable EVA-Modified Cementitious Mortars
782. Putten Jolien, Deprez Maxim, Cnudde Veerle, Schutter Geert et al. (2019-09)
     Microstructural Characterization of 3D Printed Cementitious Materials
783. Dorn Tobias, Hirsch Tamino, Stephan Dietmar (2019-09)
     Study on the Influence of Accelerators on the Hydration of Portland Cement and Their Applicability in 3D Printing
784. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-09)
     Post-Processing Techniques to Enhance Strength of Portland Cement Mortar Digitally Fabricated Using Powder-Based 3D Printing Process
785. Das Arnesh, Reiter Lex, Wangler Timothy, Flatt Robert (2019-09)
     Hydration-Control of Ternary Cements for Digital Fabrication with Concrete
786. Rutzen Matthias, Volkmer Dirk, Weiss Ursula, Reischmann Lisa et al. (2019-09)
     Micro-Structural Analysis of Crack-Growth Caused by Static and Dynamic Loads in a Carbon-Fiber-Reinforced Cement-Paste
787. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2019-09)
     Effect of Silicon-Carbide-Nano-Particles on 3D Printability of Cement-Based Materials
788. Zhang Chao, Hou Zeyu, Chen Chun, Zhang Yamei et al. (2019-09)
     Design of 3D Printable Concrete Based on the Relationship Between Flowability of Cement-Paste and Optimum Aggregate-Content
789. Long Wujian, Tao Jie-Lin, Lin Can, Gu Yucun et al. (2019-08)
     Rheology and Buildability of Sustainable Cement-Based Composites Containing Micro-Crystalline Cellulose for 3D Printing
790. Kim Kwan, Yeon Jaeheum, Lee Hee, Yeon Jung (2019-08)
     Dimensional Stability of SBR-Modified Cementitious Mixtures for Use in 3D Additive Construction
791. Peng Yiming, Ma Kunlin, Long Guangcheng, Xie Youjun (2019-08)
     Influence of Nano-SiO2, Nano-CaCO3 and Nano-Al2O3 on Rheological Properties of Cement-Fly-Ash-Paste
792. Roussel Nicolas, Bessaies-Bey Hela, Kawashima Shiho, Marchon Delphine et al. (2019-08)
     Recent Advances on Yield-Stress and Elasticity of Fresh Cement-Based Materials
793. Kim Kwan, Yeon Jaeheum, Lee Hee, Yeon Kyu-Seok (2019-08)
     Feasibility Study of SBR-Modified Cementitious Mixtures for Use as 3D Additive Construction Materials
794. Kim Kwan, Yeon Jaeheum, Lee Hee (2019-08)
     Strength Development Characteristics of SBR-Modified Cementitious Mixtures for 3D Concrete Printing
795. Zhu Binrong, Pan Jinlong, Nematollahi Behzad, Zhou Zhenxin et al. (2019-07)
     Development of 3D Printable Engineered Cementitious Composites with Ultra-High Tensile Ductility for Digital Construction
796. Yeon Kyu-Seok, Kim Kwan, Yeon Jaeheum, Lee Hee (2019-07)
     Fresh Properties of EVA-Modified Cementitious Mixtures for Use in Additive Construction by Extrusion
797. Putten Jolien, Schutter Geert, Tittelboom Kim (2019-07)
     Surface-Modification as a Technique to Improve Inter-Layer Bonding Strength in 3D Printed Cementitious Materials
798. Dey Dhrutiman, Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2019-06)
     Processing of Cementitious Materials for 3D Concrete Printing
799. Weng Yiwei, Ruan Shaoqin, Li Mingyang, Mo Liwu et al. (2019-06)
     Feasibility Study on Sustainable-Magnesium-Potassium-Phosphate Cement-Paste for 3D Printing
800. Xu Yading, Šavija Branko (2019-06)
     Development of Strain-Hardening Cementitious Composite (SHCC) Reinforced with 3D Printed Polymeric Reinforcement:
     Mechanical Properties
801. Mendoza Reales Oscar, Duda Pedro, Silva Emílio, Paiva Maria et al. (2019-06)
     Nanosilica-Particles as Structural Buildup Agents for 3D Printing with Portland Cement-Pastes
802. Hamidi Fatemeh, Aslani Farhad (2019-05)
     Additive Manufacturing of Cementitious Composites:
     Materials, Methods, Potentials, and Challenge
803. Shakor Pshtiwan, Nejadi Shami, Paul Gavin (2019-05)
     An Investigation into the Effects of Deposition-Orientation of Material on the Mechanical Behavior of the Cementitious Powder and Gypsum-Powder in Inkjet 3D Printing
804. Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud (2019-04)
     Mechanical Behavior of 3D Printed Cement Materials
805. Chen Yu, Li Zhenming, Figueiredo Stefan, Çopuroğlu Oğuzhan et al. (2019-04)
     Limestone and Calcined-Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing:
     A Fundamental Study of Extrudability and Early-Age Strength Development
806. Chen Yu, Figueiredo Stefan, Yalçınkaya Çağlar, Çopuroğlu Oğuzhan et al. (2019-04)
     The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined-Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing
807. Mazhoud Brahim, Perrot Arnaud, Picandet Vincent, Rangeard Damien et al. (2019-04)
     Underwater 3D Printing of Cement-Based Mortar
808. Lu Bing, Qian Ye, Li Mingyang, Weng Yiwei et al. (2019-04)
     Designing Spray-Based 3D Printable Cementitious Materials with Fly-Ash-Cenosphere and Air-Entraining Agent
809. Zahabizadeh Behzad, Cunha Vítor, Pereira João, Gonçalves Claúdia (2019-03)
     Development of Cement-Based Mortars for 3D Printing Through Wet Extrusion
810. Zahabizadeh Behzad, Cunha Vítor, Pereira João, Gonçalves Claúdia (2019-03)
     The Effect of Loading-Direction on the Compressive Behavior of a 3D Printed Cement-Based Material
811. Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2019-03)
     An Approach to Develop Printable Strain-Hardening Cementitious Composites
812. Lu Bing, Weng Yiwei, Li Mingyang, Qian Ye et al. (2019-02)
     A Systematical Review of 3D Printable Cementitious Materials
813. Bentz Dale, Jones Scott, Bentz Isaiah, Peltz Max (2019-02)
     Towards the Formulation of Robust and Sustainable Cementitious Binders for 3D Additive Construction by Extrusion
814. Cao Xiangpeng, Li Zongjin (2019-02)
     Factors Influencing the Mechanical Properties of Three-Dimensional Printed Products From Magnesium-Potassium-Phosphate Cement Material
815. Feng Peng, Meng Xinmiao, Chen Jian-Fei, Ye Lieping (2019-02)
     Mechanical Properties of Structures 3D Printed with Cementitious Powders
816. Kazemian Ali, Yuan Xiao, Meier Ryan, Khoshnevis Behrokh (2019-02)
     Performance-Based Testing of Portland Cement Concrete for Construction-Scale 3D Printing
817. Hambach Manuel, Rutzen Matthias, Volkmer Dirk (2019-02)
     Properties of 3D-Printed Fiber-Reinforced Portland Cement-Paste
818. Nam Young, Hwang Young, Park Ji, Lim Yun (2019-02)
     Fiber-Reinforced Cementitious Composite Design with Controlled Distribution and Orientation of Fibers Using Three-Dimensional Printing Technology
819. Weng Yiwei, Li Mingyang, Tan Ming, Qian Shunzhi (2019-02)
     Design 3D Printing Cementitious Materials via Fuller-Thompson-Theory and Marson-Percy-Model
820. Ingaglio Joseph, Fox John, Naito Clay, Bocchini Paolo (2019-02)
     Material-Characteristics of Binder-Jet 3D Printed Hydrated CSA Cement with the Addition of Fine Aggregates
821. Perrot Arnaud, Rangeard Damien, Nerella Venkatesh, Mechtcherine Viktor (2019-02)
     Extrusion of Cement-Based Materials:
     An Overview
822. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Malek Sardar (2019-01)
     Review of Emerging Additive Manufacturing Technologies in 3D Printing of Cementitious Materials in the Construction Industry
823. Nair Sooraj, Alghamdi Hussam, Arora Aashay, Mehdipour Iman et al. (2019-01)
     Linking Fresh Paste Microstructure, Rheology and Extrusion-Characteristics of Cementitious Binders for 3D Printing
824. Huang Hai, Huang Tingjie, Yuan Qiang, Zhou Dajun et al. (2019-01)
     Temperature-Dependence of Structural Build-Up and Its Relation with Hydration Kinetics of Cement-Paste
825. Weng Yiwei, Li Mingyang, Liu Zhixin, Lao Wenxin et al. (2018-12)
     Printability and Fire Performance of a Developed 3D Printable Fiber-Reinforced Cementitious Composites under Elevated Temperatures
826. Liu Zhixin, Li Mingyang, Weng Yiwei, Wong Teck et al. (2018-12)
     Mixture-Design-Approach to Optimize the Rheological Properties of the Material Used in 3D Cementitious Material-Printing
827. Chen Mingxu, Guo Xiangyang, Zheng Yan, Li Laibo et al. (2018-11)
     Effect of Tartaric Acid on the Printable, Rheological and Mechanical Properties of 3D Printing Sulphoaluminate Cement-Paste
828. Ding Zhu, Wang Xiaodong, Sanjayan Jay, Zou Patrick et al. (2018-11)
     A Feasibility Study on HPMC-Improved Sulphoaluminate Cement for 3D Printing
829. Huang Tiancheng, Gu Hai, Zhang Jie, Li Bin et al. (2018-11)
     An Improved Multi-Relaxation Time Lattice Boltzmann Method for the Non-Newtonian Influence of the Yielding Fluid Flow in Cement-3D Printing
830. Nerella Venkatesh, Beigh Mirza, Fataei Shirin, Mechtcherine Viktor (2018-11)
     Strain-Based Approach for Measuring Structural Build-Up of Cement-Pastes in the Context of Digital Construction
831. Nerella Venkatesh, Näther Mathias, Iqbal Arsalan, Butler Marko et al. (2018-09)
     In-Line Quantification of Extrudability of Cementitious Materials for Digital Construction
832. Weng Yiwei, Lu Bing, Li Mingyang, Liu Zhixin et al. (2018-09)
     Empirical Models to Predict Rheological Properties of Fiber-Reinforced Cementitious Composites for 3D Printing
833. Chen Mingxu, Li Laibo, Zheng Yan, Zhao Piqi et al. (2018-09)
     Rheological and Mechanical Properties of Admixtures-Modified 3D Printing Sulphoaluminate Cementitious Materials
834. Jones Scott, Bentz Dale, Martys Nicos, George William et al. (2018-09)
     Rheological Control of 3D Printable Cement-Paste and Mortars
835. Bao Yi, Xu Mingfeng, Soltan Daniel, Xia Tian et al. (2018-09)
     Three-Dimensional Printing Multifunctional Engineered Cementitious Composites (ECC) for Structural Elements
836. Ma Siwei, Kawashima Shiho (2018-09)
     Rheological and Water Transport Properties of Cement-Pastes Modified with Diutan Gum and Attapulgite-Palygorskite-Nano-Clay for 3D Concrete Printing
837. Moini Mohamadreza, Olek Jan, Magee Bryan, Zavattieri Pablo et al. (2018-09)
     Additive Manufacturing and Characterization of Architectured Cement-Based Materials via X-Ray Micro-Computed Tomography
838. Yang Pu, Nair Sooraj, Neithalath Narayanan (2018-09)
     Discrete Element Simulations of Rheological Response of Cementitious Binders as Applied to 3D Printing
839. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2018-09)
     Compressive Strength and Dimensional Accuracy of Portland Cement Mortar Made Using Powder-Based 3D Printing for Construction Applications
840. Putten Jolien, Schutter Geert, Tittelboom Kim (2018-09)
     The Effect of Print Parameters on the (Micro)structure of 3D Printed Cementitious Materials
841. Yu Jing, Leung Christopher (2018-09)
     Impact of 3D Printing-Direction on Mechanical Performance of Strain-Hardening Cementitious Composite (SHCC)
842. Ma Guowei, Sun Junbo, Wang Li, Aslani Farhad et al. (2018-09)
     Electromagnetic and Microwave-Absorbing Properties of Cementitious Composite for 3D Printing Containing Waste Copper Solids
843. Moini Mohamadreza, Olek Jan, Youngblood Jeffrey, Magee Bryan et al. (2018-08)
     Additive Manufacturing and Performance of Architectured Cement-Based Materials
844. Lu Bing, Li Mingyang, Lao Wenxin, Weng Yiwei et al. (2018-08)
     Effect of Spray-Based Printing Parameters on Cementitious Material-Distribution
845. Lu Bing, Li Mingyang, Lao Wenxin, Weng Yiwei et al. (2018-08)
     Experimental Investigation of Printing Parameters on Material-Distribution in 3D Spray Cementitious Material Printing Process
846. Ogura Hiroki, Nerella Venkatesh, Mechtcherine Viktor (2018-08)
     Developing and Testing of Strain-Hardening Cement-Based Composites (SHCC) in the Context of 3D Printing
847. Bentz Dale, Jones Scott, Bentz Isaiah, Peltz Max (2018-06)
     Towards the Formulation of Robust and Sustainable Cementitious Binders for 3D Additive Construction by Extrusion
848. Qian Ye, Schutter Geert (2018-06)
     Enhancing Thixotropy of Fresh Cement-Pastes with Nano-Clay in Presence of Polycarboxylate-Ether Superplasticizer (PCE)
849. Ma Guowei, Zhang Junfei, Wang Li, Li Zhijian et al. (2018-06)
     Mechanical Characterization of 3D Printed Anisotropic Cementitious Material by the Electromechanical Transducer
850. Secrieru Egor, Khodor Jad, Schröfl Christof, Mechtcherine Viktor (2018-05)
     Formation of Lubricating Layer and Flow Type During Pumping of Cement-Based Materials
851. Marchon Delphine, Kawashima Shiho, Bessaies-Bey Hela, Mantellato Sara et al. (2018-05)
     Hydration- and Rheology-Control of Concrete for Digital Fabrication:
     Potential Admixtures and Cement-Chemistry
852. Weng Yiwei, Qian Shunzhi, He Lewei, Li Mingyang et al. (2018-05)
     3D Printable High-Performance Fiber-Reinforced Cementitious Composites For Large-Scale Printing
853. Lu Bing, Li Mingyang, Qian Shunzhi, Leong Kah et al. (2018-05)
     Develop Cementitious Materials Incoporating Fly-Ash-Cenophere for Spray-Based 3D Printing
854. Ting Andrew, Tay Yi, Annapareddy Ashokreddy, Li Mingyang et al. (2018-05)
     Effect of Recycled-Glass Gradation in 3D Cementitious Material-Printing
855. Lim Jian, Weng Yiwei, Li Mingyang (2018-05)
     Effect of Fiber-Reinforced Polymer on Mechanical Performance of 3D Printed Cementitious Material
856. Annapareddy Ashokreddy, Panda Biranchi, Ting Guan, Li Mingyang et al. (2018-05)
     Flow And Mechanical Properties of 3D Printed Cementitious Material With Recycled Glass-Aggregates
857. Li Mingyang, Lao Wenxin, He Lewei, Masia Lorenzo et al. (2018-05)
     Effect of Rotational Trapezoid Shaped Nozzle on Material-Distribution in 3D Cementitious Material-Printing-Process
858. Yeon Kyu-Seok, Kim Kwan, Yeon Jaeheum (2018-05)
     Feasibility Study of the Use of Polymer-Modified Cement Composites as 3D Concrete Printing-Material
859. Qian Ye, Schutter Geert (2018-04)
     Different Effects of NSF and PCE Superplasticizer on Adsorption, Dynamic Yield-Stress and Thixotropy of Cement-Pastes
860. Soltan Daniel, Li Victor (2018-03)
     A Self-Reinforced Cementitious Composite for Building-Scale 3D Printing
861. Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2018-01)
     Penetration of Cement-Pastes into Sand-Packings During 3D Printing:
     Analytical and Experimental Study
862. Weng Yiwei, Li Mingyang, Tan Ming, Qian Shunzhi (2018-01)
     Design 3D Printing Cementitious Materials via Fuller-Thompson-Theory and Marson-Percy-Model
863. Ma Guowei, Li Zhijian, Wang Li (2017-12)
     Printable Properties of Cementitious Material Containing Copper-Tailings for Extrusion-Based 3D Printing
864. Yuan Qiang, Zhou Dajun, Li Baiyun, Huang Hai et al. (2017-11)
     Effect of Mineral Admixtures on the Structural Build-Up of Cement-Paste
865. Villacis N., Gualavisi M., Narváez-Muñoz Christian, Carrión L. et al. (2017-11)
     Additive Manufacturing of a Rheological Characterized Cement-Based Composite Material
866. Khalil Noura, Aouad Georges, Cheikh Khadija, Rémond Sébastien (2017-09)
     Use of Calcium-Sulfoaluminate-Cements for Setting-Control of 3D Printing Mortars
867. Paul Suvash, Tay Yi, Panda Biranchi, Tan Ming (2017-08)
     Fresh and Hardened Properties of 3D Printable Cementitious Materials for Building and Construction
868. Biernacki Joseph, Bullard Jeffrey, Sant Gaurav, Banthia Nemkumar et al. (2017-04)
     Cements in the 21st Century:
     Challenges, Perspectives, and Opportunities
869. Kazemian Ali, Yuan Xiao, Cochran Evan, Khoshnevis Behrokh (2017-04)
     Cementitious Materials for Construction-Scale 3D Printing:
     Laboratory Testing of Fresh Printing Mixture
870. Shakor Pshtiwan, Sanjayan Jay, Nazari Ali, Nejadi Shami (2017-02)
     Modified 3D Printed Powder to Cement-Based Material and Mechanical Properties of Cement Scaffold Used in 3D Printing
871. Hambach Manuel, Volkmer Dirk (2017-02)
     Properties of 3D Printed Fiber-Reinforced Portland-Cement-Paste
872. Qian Ye, Kawashima Shiho (2016-09)
     Use of Creep Recovery Protocol to Measure Static Yield-Stress and Structural Rebuilding of Fresh Cement-Pastes
873. Hambach Manuel, Möller Hendrik, Neumann Thomas, Volkmer Dirk (2016-08)
     Portland-Cement-Paste with Aligned Carbon-Fibers Exhibiting Exceptionally High Flexural Strength (>100 MPa)
874. Choi Myoungsung, Park Kyoungsoo, Oh Taekeun (2016-06)
     Viscoelastic Properties of Fresh Cement-Paste to Study the Flow Behavior
875. Nam Young, Park Ji, Yoon Seung, Lim Yun (2016-06)
     3D Printing of Fibers and Reinforcements for Cementitious Composites to Maximize the Fracture-Resisting Performance of FRCCs
876. Farina Ilenia, Fabbrocino F., Carpentieri G., Modano M. et al. (2015-12)
     On the Reinforcement of Cement Mortars through 3D Printed Polymeric- and Metallic-Fibers
877. Zhou Xiangming, Li Zongjin (2015-08)
     Manufacturing Cement-Based Materials and Building Products via Extrusion:
     From Laboratory to Factory
878. Beigh Mirza, Nerella Venkatesh, Schröfl Christof, Mechtcherine Viktor (2015-06)
     Studying the Rheological Behavior of Limestone-Calcined-Clay-Cement (LC3) Mixtures in the Context of Extrusion-Based 3D Printing
879. Feng Peng, Meng Xinmiao, Chen Jian-Fei, Ye Lieping (2015-06)
     Mechanical Properties of Structures 3D Printed with Cementitious Powders
880. Bessaies-Bey Hela, Baumann Robert, Schmitz Marc, Radler Michael et al. (2015-05)
     Effect of Polyacrylamide on Rheology of Fresh Cement-Pastes
881. Perrot Arnaud, Rangeard Damien, Pierre Alexandre (2015-02)
     Structural Build-Up of Cement-Based Materials Used for 3D Printing-Extrusion-Techniques
882. Roussel Nicolas, Gram Annika (2014-03)
     Physical Phenomena Involved in Flows of Fresh Cementitious Materials
883. Gibbons Gregory, Williams Reuben, Purnell Phil, Farahi Elham (2013-07)
     3D Printing of Cement Composites
884. Zhou Xiangming, Li Zongjin, Fan Mizi, Chen Huapeng (2013-01)
     Rheology of Semi-Solid Fresh Cement-Pastes and Mortars in Orifice-Extrusion
885. Perrot Arnaud, Mélinge Yannick, Estellé Patrice, Lanos Christophe (2009-04)
     Vibro-Extrusion:
     A New Forming Process for Cement-Based Materials
886. Deng Shou-chang, Zhang Xue-bing, Qin Ying-hui, Luo Guan-xiang (2007-02)
     Rheological Characteristic of Cement Clean Paste and Flowing Behavior of Fresh Mixing Concrete with Pumping in Pipeline
887. Voigt Thomas, Malonn Tim, Shah Surendra (2005-10)
     Green and Early-Age Compressive Strength of Extruded Cement Mortar Monitored with Compression Tests and Ultrasonic Techniques
888. Takashima Hiroyuki, Miyagai Kiyotaka, Hashida Toshiyuki, Li Victor (2002-09)
     A Design Approach for the Mechanical Properties of Polypropylene-Discontinuous-Fiber-Reinforced Cementitious Composites by Extrusion-Molding