Chen Yuning¶

1. Xia Kailun, Chen Yuning, Jia Lutao, Quan Shitao et al. (2025-10)
   The Impact of Internal Stress Generated During the Printing Process on the Early-Age Properties of 3D Printed Concrete
2. Xia Kailun, Chen Yuning, Chen Yu, Jia Lutao et al. (2025-04)
   Programmable Toughening for 3D Printed Concrete and Architected Cementitious Materials
3. Xia Kailun, Chen Yuning, Zhang Zedi, Wang Wei et al. (2025-03)
   In-Situ Crosslinked Nano-SiO2 Reinforced Alginate Bio-Textile for Mitigating Plastic Shrinkage in 3D Printed Concrete
4. Chen Yuning, Xia Kailun, Dong Enlai, Cao Ruilin et al. (2024-10)
   A Mechanical Characteristic Capture-Method Considering Printing-Configurations for Buildability-Modeling in Concrete 3D Printing
5. Xia Kailun, Chen Yuning, Chen Yu, Jia Zijian et al. (2024-04)
   Understanding and Modeling the Plastic Deformation of 3D Printed Concrete Based on Viscoelastic Creep Behavior
6. Ma Lei, Jia Zijian, Chen Yuning, Jiang Yifan et al. (2024-03)
   Water Loss and Shrinkage Prediction in 3D Printed Concrete with Varying w/b and Specimen Sizes
7. Jia Zijian, Zhou Mengting, Chen Yu, Wang Wei et al. (2024-03)
   Effect of Steel-Fiber Shape and Content on Printability, Microstructure and Mechanical Properties of 3D Printable High-Strength Cementitious Materials
8. Shi Yifan, Jia Lutao, Jia Zijian, Ma Lei et al. (2024-03)
   Early-Age Inhomogeneous Deformation of 3D Printed Concrete:
   Characteristics and Influences of Superplasticizer and Water-Binder Ratio
9. Chen Yuning, Xia Kailun, Jia Zijian, Gao Yueyi et al. (2023-10)
   Extending Applicability of 3D Printable Geopolymer to Large-Scale Printing Scenario via Combination of Sodium Carbonate and Nano-Silica
10. Chen Wei, Pan Jinlong, Zhu Binrong, Ma XiaoMeng et al. (2023-06)
    Improving Mechanical Properties of 3D Printable One-Part Geopolymer Concrete with Steel-Fiber-Reinforcement
11. Liu Chao, Chen Yuning, Zhang Zedi, Niu Geng et al. (2022-10)
    Study of the Influence of Sand on Rheological Properties, Bubble Features and Buildability of Fresh Foamed Concrete for 3D Printing
12. Chen Yuning, Zhang Yamei, Xie Yudong, Zhang Zedi et al. (2022-09)
    Unraveling Pore-Structure Alternations in 3D Printed Geopolymer Concrete and Corresponding Impacts on Macro-Properties
13. Liu Chao, Chen Yuning, Xiong Yuanliang, Jia Lutao et al. (2022-06)
    Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Buildability of 3D Printing Foam-Concrete:
    From Water State and Flocculation Point of View
14. Wang Xianggang, Jia Lutao, Jia Zijian, Zhang Chao et al. (2022-06)
    Optimization of 3D Printing Concrete with Coarse Aggregate via Proper Mix-Design and Printing-Process
15. Chen Yuning, Liu Chao, Cao Ruilin, Chen Chun et al. (2022-02)
    Systematical Investigation of Rheological Performance Regarding 3D Printing Process for Alkali-Activated Materials:
    Effect of Precursor Nature
16. Chen Yuning, Jia Lutao, Liu Chao, Zhang Zedi et al. (2022-01)
    Mechanical Anisotropy Evolution of 3D Printed Alkali-Activated Materials with Different GGBFS-FA Combinations
17. Liu Chao, Xiong Yuanliang, Chen Yuning, Jia Lutao et al. (2022-01)
    Effect of Sulphoaluminate Cement on Fresh and Hardened Properties of 3D Printing Foamed Concrete
18. Liu Chao, Wang Xianggang, Chen Yuning, Zhang Chao et al. (2021-06)
    Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Stability, Rheological Properties, and Printability of 3D Printing Foam-Concrete