Wang Yufei¶

1. Huang Bo, Liu Chang, Sun Junbo, Wang Yufei et al. (2025-12)
   Optimized Synergy of Fiberglass Mesh and PP Fibers-Modified Structural Adhesive for Enhanced Mechanical and Microstructural Performance in 3D Printing Concrete
2. Zhang Genbao, Chen Lingke, Liu Miao, Morsy Amr et al. (2025-12)
   Enhancing the Shear Properties of U-Shaped Steel Wire Mesh Reinforced 3D Printed Composites
3. Wang Yufei, Sun Junbo, Wang Xiangyu, Huang Bo et al. (2025-09)
   Environmental and Economic Evaluation of a Prefabricated 3D-Printed Structural Units Using Recycled Aggregates from Construction and Demolition Waste:
   A Case Study in China
4. Zhao Hongyu, Wang Xiangyu, Sun Junbo, Wu Fei et al. (2025-03)
   Automated Analysis System for Micro-Defects in 3D Printed Concrete
5. Zhao Hongyu, Wang Xiangyu, Chen Zhaohui, Liu Xianda et al. (2025-02)
   Microcrack Investigations of 3D Printing Concrete Using Multiple Transformer Networks
6. Sun Junbo, Wang Yufei, Yang Xin, Wang Haihong et al. (2025-01)
   Red Mud Utilization in Fiber-Reinforced 3D Printed Concrete:
   Mechanical Properties and Environmental Impact Analysis
7. Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-12)
   Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing Technology:
   Corrigendum
8. Zhao Hongyu, Sun Junbo, Wang Xiangyu, Wang Yufei et al. (2024-12)
   Real-Time and High-Accuracy Defect Monitoring for 3D Concrete Printing Using Transformer Networks
9. Zhao Hongyu, Jassmi Hamad, Liu Xianda, Wang Yufei et al. (2024-12)
   Artificial Intelligence-Based Microcracks Research in 3D Printing Concrete
10. Huang Bo, Ge Yutian, Wang Xiangyu, Wang Yufei et al. (2024-11)
    Recycled Ceramic-Brick-Powder Utilization in Fiber-Reinforced 3D Printing Concrete:
    An Eco-Friendly Substitute to Conventional Fine Aggregates
11. Sun Junbo, Zhang Yanling, Wu Qi, Wang Yufei et al. (2024-10)
    3D Printed Concrete Incorporating Waste-Rubber:
    Anisotropic Properties and Environmental Impact-Analysis
12. Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-08)
    Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing-Technology
13. Yuan Shuaihua, Duan Dengke, Sun Junbo, Yu Yi et al. (2024-08)
    Mechanical, Alkali Excitation, Hydrothermal Enhancement of 3D Printed Concrete Incorporated with Antimony-Tailings
14. Lyu Xin, Elchalakani Mohamed, Wang Xiangyu, Sun Junbo et al. (2024-07)
    Mechanical Performance and Anisotropic Analysis of Rubberised 3D Printed Concrete Incorporating PP-Fiber
15. Yang Chao, Xu Xinglong, Lei Zuxiang, Sun Junbo et al. (2024-06)
    Enhancing Mechanical Properties of Three-Dimensional Concrete at Elevated Temperatures Through Recycled Ceramic-Powder Treatment Methods
16. Zhao Hongyu, Wang Xiangyu, Sun Junbo, Wang Yufei et al. (2024-04)
    Artificial Intelligence Powered Real-Time Quality Monitoring for Additive Manufacturing in Construction
17. Sun Junbo, Liu Shukui, Ma Zhangguo, Wang Di et al. (2024-03)
    3D Printed Lightweight Concrete Containing Surface-Pretreated Coal-Gangue
18. Tang Weichen, Sun Junbo, Wang Yufei, Chen Zhaohui et al. (2024-02)
    Electromagnetic Absorption Properties of 3D Printed Fiber-Oriented Composites Under Different Paths
19. Zhu Binrong, Wang Yufei, Sun Junbo, Wei Yang et al. (2023-10)
    An Experimental Study on the Influence of Waste-Rubber-Particles on the Compressive, Flexural and Impact Properties of 3D Printable Sustainable Cementitious Composites
20. Singh Amardeep, Wang Yufei, Zhou Yiyi, Sun Junbo et al. (2023-10)
    Utilization of Antimony-Tailings in Fiber-Reinforced 3D Printed Concrete:
    A Sustainable Approach for Construction Materials
21. Yao Xiaofei, Lyu Xin, Sun Junbo, Wang Bolin et al. (2023-03)
    AI-Based Performance Prediction for 3D Printed Concrete Considering Anisotropy and Steam-Curing Condition