Yu Kequan¶

1. Chen Wenguang, Yu Jie, Ye Junhong, Yu Jiangtao et al. (2025-11)
   3D Printed High-Performance Fiber-Reinforced Cementitious Composites:
   Fresh, Mechanical, and Microstructural Properties
2. Ding Tao, Zhu Ruitao, Yu Kequan, Xiao Jianzhuang (2025-10)
   Direct Tensile Behavior of Three-Dimensional-Printable Steel Fiber-Reinforced Ultrahigh Performance Concrete
3. Chen Wenguang, Liang Long, Ye Junhong, Liu Lingfei et al. (2025-09)
   Machine Learning-Enabled Performance-Based Design of Three-Dimensional Printed Engineered Cementitious Composites
4. Lin Manfang, Ding Yao, Yu Fan, Li Lingzhi et al. (2025-08)
   Synergistic Strengthening of 3D‑printed ECC Beams Through Steel-Wire Mesh and Interfaces Treatments
5. Chen Wenguang, Liang Long, Zhou Boyang, Ye Junhong et al. (2025-02)
   A Fracture Mechanics Model for Predicting Tensile Strength and Fracture Toughness of 3D Printed Engineered Cementitious Composites
6. Yu Jie, Teng Fei, Ye Junhong, Zhang Dong et al. (2025-01)
   Size-Dependent Model to Predict the Flexural-Strength of 3D Printed Engineered Cementitious Composites Beams
7. Bai Meiyan, Xiao Jianzhuang, Ding Tao, Yu Kequan (2024-12)
   Interfacial Bond-Properties Between 3D Printed Engineered Cementitious Composite and Post-Cast Concrete
8. Lin Manfang, Yu Kequan (2024-11)
   A Rapid Reinforcement-Technique Using FRP and Steel-Wire Mesh in 3D Printed ECC Beams
9. Lin Manfang, Li Lingzhi, Jiang Fangming, Ding Yao et al. (2024-11)
   Automated Reinforcement of 3D Printed Engineered Cementitious Composite Beams
10. Yu Jie, Weng Yiwei, Teng Fei, Ye Junhong et al. (2024-09)
    Prediction of the Flexural Strength of 3D Printed SHCC Beams Based on a Stochastic Size-Dependent Model
11. Ding Yao, Liu Jiepeng, Ou Xingjian, Nishiwaki Tomoya et al. (2024-08)
    3D Printing Hybrid-Fiber-Reinforced Engineered Cementitious Composites:
    Feasibility in Long-Open-Time Applications
12. Jiang Fangming, Lin Manfang, Yu Kequan (2024-07)
    Mechanical Properties of 3D Printed ECC Beams Reinforced with FRP Mesh
13. Yan Kang-Tai, Wang Xian-Peng, Ding Yao, Li Lingzhi et al. (2024-06)
    3D Printed LC3-Based Lightweight Engineered Cementitious Composites:
    Fresh State, Hardened Material-Properties and Beam-Performance
14. Chen Wenguang, Ye Junhong, Jiang Fangming, Fediuk Roman et al. (2024-05)
    Printability Region for 3D Printable Engineered Cementitious Composites
15. Yan Kang-Tai, Li Lingzhi, Ye Junhong, Bazarov Dilshod et al. (2024-05)
    Anisotropic Size-Effect of 3D Printed LC3-Based Engineered Cementitious Composites
16. Uddin Md, Ye Junhong, Haque M., Yu Kequan et al. (2024-04)
    A Novel Compressive Strength Estimation Approach for 3D Printed Fiber-Reinforced Concrete:
    Integrating Machine Learning and Gene Expression Programming
17. Xiao Jianzhuang, Liu Haoran, Ding Tao, Yu Kequan et al. (2024-02)
    Rebar-Free Concrete Construction:
    Concept, Opportunities and Challenges
18. Ye Junhong, Zhang Jiangdi, Yu Jie, Yu Jiangtao et al. (2023-11)
    Flexural Behaviors of 3D Printed Lightweight Engineered Cementitious Composites (ECC) Slab with Hollow Sections
19. Uddin Md, Ye Junhong, Deng Boyu, Li Lingzhi et al. (2023-04)
    Interpretable Machine Learning for Predicting the Strength of 3D Printed Fiber-Reinforced Concrete
20. Bai Meiyan, Wu Yuching, Xiao Jianzhuang, Ding Tao et al. (2023-04)
    Workability and Hardened Properties of 3D Printed Engineered Cementitious Composites Incorporating Recycled Sand and PE-Fibers
21. Zhu He, Yu Kequan, McGee Wesley, Ng Tsz et al. (2021-11)
    Limestone-Calcined-Clay-Cement for Three-Dimensional Printed Engineered Cementitious Composites
22. Yu Kequan, McGee Wesley, Ng Tsz, Zhu He et al. (2021-02)
    3D Printable Engineered Cementitious Composites:
    Fresh and Hardened Properties
23. Ye Junhong, Cui Can, Yu Jiangtao, Yu Kequan et al. (2021-02)
    Effect of Polyethylene-Fiber Content on Workability and Mechanical-Anisotropic Properties of 3D Printed Ultra-High-Ductile Concrete
24. Ye Junhong, Cui Can, Yu Jiangtao, Yu Kequan et al. (2021-01)
    Fresh and Anisotropic-Mechanical Properties of 3D Printable Ultra-High-Ductile Concrete with Crumb-Rubber
25. McGee Wesley, Ng Tsz, Yu Kequan, Li Victor (2020-07)
    Extrusion Nozzle Shaping for Improved 3DP of Engineered Cementitious Composites (ECC-SHCC)
26. Li Victor, Bos Freek, Yu Kequan, McGee Wesley et al. (2020-04)
    On the Emergence of 3D Printable Engineered, Strain-Hardening Cementitious Composites