Zhang Zedi¶

1. Xia Kailun, Chen Yuning, Jia Lutao, Quan Shitao et al. (2025-10)
   The Impact of Internal Stress Generated During the Printing Process on the Early-Age Properties of 3D Printed Concrete
2. Xia Kailun, Chen Yuning, Zhang Zedi, Wang Wei et al. (2025-03)
   In-Situ Crosslinked Nano-SiO2 Reinforced Alginate Bio-Textile for Mitigating Plastic Shrinkage in 3D Printed Concrete
3. Dong Enlai, Yuan Hanquan, Chen Yu, Jia Lutao et al. (2025-01)
   Printing Large-Size Eggshell-Shaped Elements with Ultra-High-Performance Concrete:
   From Material-Design to Structural Bearing-Capacity-Assessment
4. Dong Enlai, Jia Zijian, Jia Lutao, Rao Suduan et al. (2024-10)
   Modeling Fiber-Alignment in 3D Printed Ultra-High-Performance Concrete Based on Stereology-Theory
5. Wang Xianggang, Dong Enlai, Jia Zijian, Jia Lutao et al. (2024-09)
   Specimen-Size-Effect on Compressive Strength of 3D Printed Concrete Containing Coarse Aggregate with Varying Water-to-Binder-Ratios
6. Liu Chao, Zhang Zedi, Jia Zijian, Cao Ruilin et al. (2024-07)
   Quantitative Characterization of Bubble-Stability of Foam-Concrete Throughout Extrusion-Process:
   From Yield-Stress , Viscosity and Surface Tension Point of View
7. Shi Yifan, Jia Lutao, Jia Zijian, Ma Lei et al. (2024-03)
   Early-Age Inhomogeneous Deformation of 3D Printed Concrete:
   Characteristics and Influences of Superplasticizer and Water-Binder Ratio
8. Jia Lutao, Jia Zijian, Zhang Zedi, Tang Zhenzhong et al. (2024-02)
   Effect of Recycled Brick-Powder with Various Particle-Features on Early-Age Hydration, Water-State, and Rheological Properties of Blended Cement-Paste in the Context of 3D Printing
9. Yang Min, Li Chao, Liu Hao, Huo Longfei et al. (2024-02)
   Exploring the Potential for Carrying Capacity and Reusability of 3D Printed Concrete Bridges:
   Construction, Dismantlement, and Reconstruction of a Box Arch Bridge
10. Jia Zijian, Zhang Zedi, Jia Lutao, Cao Ruilin et al. (2023-09)
    Effect of Different Expansive Agents on the Early-Age Structural Build-Up Process of Cement-Paste
11. Liu Chao, Chen Yuning, Zhang Zedi, Niu Geng et al. (2022-10)
    Study of the Influence of Sand on Rheological Properties, Bubble Features and Buildability of Fresh Foamed Concrete for 3D Printing
12. Ma Lei, Zhang Qing, Lombois-Burger Hélène, Jia Zijian et al. (2022-09)
    Pore-Structure, Internal Relative Humidity, and Fiber-Orientation of 3D Printed Concrete with Polypropylene-Fiber and Their Relation with Shrinkage
13. Chen Yuning, Zhang Yamei, Xie Yudong, Zhang Zedi et al. (2022-09)
    Unraveling Pore-Structure Alternations in 3D Printed Geopolymer Concrete and Corresponding Impacts on Macro-Properties
14. Wang Zhibin, Jia Lutao, Deng Zhicong, Zhang Chao et al. (2022-08)
    Bond Behavior Between Steel-Bars and 3D Printed Concrete:
    Effect of Concrete Rheological Property, Steel-Bar Diameter and Paste-Coating
15. Chen Yuning, Jia Lutao, Liu Chao, Zhang Zedi et al. (2022-01)
    Mechanical Anisotropy Evolution of 3D Printed Alkali-Activated Materials with Different GGBFS-FA Combinations