Federowicz Karol¶

1. Federowicz Karol, Sibera Daniel, Tošić Nikola, Zieliński Adam et al. (2026-01)
   Early-Age Shrinkage Monitoring of 3D-Printed Cementitious Mixtures: Comparison of Measuring Techniques and Low-Cost Alternatives
2. Nermend Loran, Skibicki Szymon, Techman Mateusz, Federowicz Karol et al. (2025-12)
   Electrical Resistivity and Elevated Temperature Performance of 3D Printed Concrete Containing Nanosized Radiation Shielding Admixtures
3. Sikora Paweł, Federowicz Karol, Skibicki Szymon, Techman Mateusz et al. (2025-11)
   Demonstration of 3D-Printed Concrete Containing Fine Recycled Concrete Aggregates and Recycled Concrete Powder:
   Rheology, Early-Age, Shrinkage, Mechanical, and Durability Performance.
4. Sikora Paweł, Skibicki Szymon, Bielawski Jakub, Techman Mateusz et al. (2025-09)
   Elevated Temperature Response and Fire Resistance Considerations of 3D-Printed Concrete:
   Small- to Medium-Scale Wall Experiments
5. Sikora Paweł, Skibicki Szymon, Chougan Mehdi, Szewczyk Piotr et al. (2025-03)
   Silica-Coated Admixtures of Bismuth and Gadolinium Oxides for 3D Printed Concrete Applications:
   Rheology, Hydration, Strength, Microstructure, and Radiation Shielding Perspective
6. Sikora Paweł, Rathnarajan Sundar, Federowicz Karol, Techman Mateusz et al. (2024-11)
   Use of Seawater as an Accelerator in 3D Printed Concrete
7. Federowicz Karol, Cendrowski Krzysztof, Sikora Paweł (2024-10)
   Low-Carbon Cementitious Composite Incorporated with Biochar and Recycled Fines Suitable for 3D Printing Applications:
   Hydration, Shrinkage and Early-Age Performance
8. Chougan Mehdi, Skibicki Szymon, Noaimat Yazeed, Federowicz Karol et al. (2024-09)
   Comparative Analysis of Ternary Blended Cement with Clay and Engineering-Brick-Aggregate for High-Performance 3D Printing
9. Sikora Paweł, Federowicz Karol, Techman Mateusz, Skibicki Szymon (2024-09)
   Fine Recycled Concrete Aggregates in 3D Printed Concrete
10. Skibicki Szymon, Federowicz Karol, Hoffmann Marcin, Chougan Mehdi et al. (2024-05)
    Potential of Reusing 3D Printed Concrete (3DPC) Fine Recycled Aggregates as a Strategy Towards Decreasing Cement Content in 3DPC
11. Noaimat Yazeed, Chougan Mehdi, Albar Abdulrahman, Skibicki Szymon et al. (2023-10)
    Recycled Brick-Aggregates in One-Part Alkali-Activated Materials:
    Impact on 3D Printing Performance and Material-Properties
12. Federowicz Karol, Techman Mateusz, Skibicki Szymon, Chougan Mehdi et al. (2023-08)
    Development of 3D Printed Heavyweight Concrete Containing Magnetite-Aggregate
13. Sikora Paweł, Techman Mateusz, Federowicz Karol, Khayatt Ahmed et al. (2022-07)
    Insight into the Microstructural and Durability Characteristics of 3D Printed Concrete:
    Cast versus Printed Specimens
14. Skibicki Szymon, Techman Mateusz, Federowicz Karol, Olczyk Norbert et al. (2021-12)
    Experimental Study of Hardened Young's Modulus for 3D Printed Mortar
15. Skibicki Szymon, Kaszyńska Maria, Wahib Nawid, Techman Mateusz et al. (2020-07)
    Properties of Composite Modified with Limestone-Powder for 3D Concrete Printing
16. Federowicz Karol, Kaszyńska Maria, Zieliński Adam, Hoffmann Marcin (2020-06)
    Effect of Curing Methods on Shrinkage Development in 3D Printed Concrete