Demont Léo¶

1. Caneda-Martínez Laura, Hassan M., Demont Léo, Keita Emmanuel et al. (2026-01)
   Fast Penetration Testing of Printable Concretes with a Portable Device:
   Robustness and Calibration
2. Mesnil Romain, Rosa Pedro, Demont Léo (2025-03)
   Thickness Optimisation in 3D Printed Concrete Structures
3. Caron Jean-François, Ducoulombier Nicolas, Demont Léo (2025-01)
   Reinforcement of Printed Structures
4. Demont Léo, Bono Victor, Ducoulombier Nicolas, Mesnil Romain et al. (2024-11)
   Anisotropic Concrete:
   A Composite Look on the Engineering and Architecture of Concrete Construction
5. Bono Victor, Demont Léo, Ducoulombier Nicolas, Mesnil Romain et al. (2024-09)
   Large-Scale 3D Printing of a Shell Structure Reinforced by the Flow-Based Pultrusion Process
6. Demont Léo, Mesnil Romain, Caron Jean-François (2024-09)
   Structuration-Rate-Measurement Using a Digital Pocket Vane
7. Caron Jean-François, Ducoulombier Nicolas, Demont Léo, Bono Victor et al. (2024-06)
   Reinvent Reinforced Concrete with Robotics and 3D Printing
8. Caron Jean-François, Ducoulombier Nicolas, Demont Léo, Bono Victor et al. (2023-10)
   3D Printing of Continuous-Fibers Cementitious Composites:
   Anisotropic 3D Mortar
9. Demont Léo, Mesnil Romain, Ducoulombier Nicolas, Caron Jean-François (2023-10)
   Affordable In-Line Structuration Measurements of Printable Mortar with a Pocket-Shear-Vane
10. Demont Léo, Charrier Malo, Margerit Pierre, Ducoulombier Nicolas et al. (2022-06)
    Flow-Based Pultrusion of Anisotropic Concrete:
    Mechanical Properties at Hardened State
11. Caron Jean-François, Demont Léo, Ducoulombier Nicolas, Mesnil Romain (2021-06)
    3D Printing of Mortar with Continuous Fibers:
    Principle, Properties and Potential for Application
12. Ducoulombier Nicolas, Mesnil Romain, Carneau Paul, Demont Léo et al. (2021-05)
    The “Slugs-Test” for Extrusion-Based Additive Manufacturing:
    Protocol, Analysis and Practical Limits
13. Archez Julien, Maitenaz Sébastien, Demont Léo, Charrier Malo et al. (2021-02)
    Strategy to Shape, on a Half-Meter Scale, a Geopolymer Composite Structure by Additive Manufacturing
14. Demont Léo, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2021-01)
    Flow-Based Pultrusion of Continuous Fibers for Cement-Based Composite Material and Additive Manufacturing:
    Rheological and Technological Requirements
15. Duballet Romain, Mesnil Romain, Ducoulombier Nicolas, Carneau Paul et al. (2020-07)
    Free Deposition-Printing for Space-Truss-Structures
16. Ducoulombier Nicolas, Carneau Paul, Mesnil Romain, Demont Léo et al. (2020-07)
    The Slug-Test:
    In-Line-Assessment of Yield-Stress for Extrusion-Based Additive Manufacturing
17. Ducoulombier Nicolas, Demont Léo, Chateau Camille, Bornert Michel et al. (2020-04)
    Additive Manufacturing of Anisotropic Concrete:
    A Flow-Based Pultrusion of Continuous Fibers in a Cementitious Matrix