#property¶

Keywords by Co - Occurrence¶

#print (492) #concrete (319) #mechanics (271) #cement (188) #printability (129)

1. Rossin Alessandro, Trento Daniel, Sidhu Amandeep, Letelier-Gonzalez Viviana et al. (2026-04)
   Mechanical and Durability Properties of Extrudable Cob Mixes with Recycled Materials
2. Yuan Pu, Wang Xinjie, Huang Jie, Shi Quanbin et al. (2026-04)
   Feasibility, Mechanical Properties, and Environmental Impact of 3D-Printed Mortar Incorporating Recycled Fine Aggregates from Decoration and Renovation Waste
3. Wang Huai, Li Xiulin, Gong Hao, Wang Peijun et al. (2026-04)
   Thermal and Mechanical Properties of 3D Printed Lightweight Hollow Glass Microsphere Aggregate Concrete
4. Luo Jintao, Zhang Li, Guan Xuemao, Yao Tianshuai et al. (2026-04)
   Recycling Molybdenum Tailings to Produce Eco-Friendly 3D-Printed Concrete:
   Rheological Properties, Mechanical Evolution and Internal Curing Mechanism
5. Yang Xia, Wang Jiuyuan, Zhang Zhenming, Tan Yushuang et al. (2026-04)
   A Comparative Analysis of 3D-Printed Concrete Incorporating Fibers and Fiber Grids:
   Mechanical Properties and Microstructure
6. Lemougna Patrick, Cantaluppi Marco, Faleschini Flora, Toska Klajdi et al. (2026-04)
   Mechanical Properties, 3D Printing and Environmental Performance of Ordinary Portland Cement (OPC) Mortars Containing Calcite Rich Residue from Stabilised Basic Oxygen Furnace Slag
7. Akula Pavan, Ray Saswati, Bastola Ashish, Masoomi Maryam et al. (2026-04)
   Suction-Based Framework of 3D-Printed Earthen Materials:
   Linking Geotechnical Properties, Buildability, and Strength
8. Bos Derk, Deetman Arjen, Wolfs Robert (2026-04)
   Correlating in-Line Sensor Data to Hardened State Material Properties in Digital Fabrication with Concrete
9. Zhen Houru, Wang Zhendi, Wang Ling, Zeng Qiang et al. (2026-03)
   Interfacial Property and Microstructure Improvement of 3D Printed Concrete via Micro-Region Vibration
10. La Quoc, Meyer Knut, Kollmannsberger Stefan, Jänicke Ralf (2026-03)
    Viscoplastic Modeling the Evolving Mechanical Properties of Shotcrete 3D Printing Material
11. Luo Jianfen, Wang Qidong, Wang Lijia, Fang Mingyue (2026-03)
    A Review of the Rheological Properties of 3D-Printed Concrete:
    Raw Materials, Printing Parameters, and Evolution Mechanisms
12. Huang Kaisheng, Elchalakani Mohamed, Ran Hongyu, Ayough Pouria et al. (2026-03)
    Improvement of the Self-Sensing Properties of the 3D Printing UHPC Incorporating Conductive Rubber
13. Šerelis Evaldas, Vaitkevičius Vitoldas, Korat Bensa Lidija, Serjun Vesna et al. (2026-03)
    Effect of Chemical and Physico-Chemical Activation on the Properties of 3D Printed Concrete with a Low-Cement Multicomponent Binder
14. Liu Yalin, Fan Weichen, Li Chengze, Wei Ya et al. (2026-03)
    Printability, Mechanical, and Shrinkage Properties of 3D Printing Internally-Cured Ultra-High Performance Concrete
15. Cheng Shengbo, Grimm Benedikt, Unterreiner Michael, Hechtl Christian et al. (2026-03)
    Properties of the Transition Region in 3D Printed Functionally Graded Concrete Through Near Nozzle Binder-Aggregate Mixing
16. Zhu Chao, Li Hairuo, Liu Chao, Zhao Nan et al. (2026-03)
    Freeze-Thaw Resistance of 3D Printed Concrete:
    Comprehensive Evaluation of Material Properties and Printing Parameters
17. Marchuk Vitaliy, Makarenko Ruslan, Dvorkin Leonid, Ribakov Yuri (2026-02)
    Modifying the Properties of Construction Mixtures Containing Crushed Concrete Waste for 3D Printing
18. Yu Chaomin, Si Qi, Pan Zhihong, Ding Faxing (2026-02)
    Study on the Anisotropic Mechanical and Durability Properties of 3D-Printed Recycled PVC Concrete
19. Berdini Daniele, Donnini Jacopo, Cognoli Roberto, Galasso Marco et al. (2026-02)
    Influence of Recycled Aggregates on Fresh and Hardened Properties of 3D Printable Concrete Mix
20. Ahmed Nishad, Sarkar Sudipto, Ashraf Warda (2026-02)
    Rheological and Mechanical Properties of Carbon-Negative 3D Printed Mortar Using Functionalized Biochar
21. Liu Bei, Wang Hao, Yin Haibin, Li Yufeng (2026-02)
    Design Method and Mechanical Properties of Construction 3D Printing Infill Structures Inspired by Origami Patterns
22. Sun Tianyu, Ren Zhongyuan, Liu Jiarui, Ong Dominic et al. (2026-02)
    Rheology Properties and Future Trend of 3D Printing Concrete:
    State of the Art Review
23. Zheng Yuanxun, Li Yate, Xi Xinyue, Sun Zhenghan et al. (2026-02)
    Research on the Regulation of Rheological Properties of 3D Printed Recycled Concrete and Multi-Objective Optimization of Printer Parameters
24. Zhou Wenjuan, Yang Can, He Xiao, Zhou Mingli et al. (2026-02)
    Sustainably 3D-Printing Mortar with Construction Residue Sand:
    Printability, Mechanical Properties, and Microstructural Mechanisms
25. Bihari Ádám, Nemes Rita (2026-01)
    Investigation of Water Vapor Adsorption and Thermal Conductivity Properties of Stabilized Earth Mixtures for the Construction of 3D Printed Wall Structures
26. Feng Lei, Chen Nuo, Wen Xiaodong (2026-01)
    Influence of Process Parameters on Interlayer Interface Mechanical Properties of 3D Printing Fiber Reinforced Concrete
27. Kligys Modestas, Girskas Giedrius, Baltuškiene Daiva (2026-01)
    Influence of the Amount of Mineral Additive on the Rheological Properties and the Carbon Footprint of 3D-Printed Concrete Mixtures
28. Hu Zhiheng, Elchalakani Mohamed, Ran Hongyu, Yang Bo (2026-01)
    Multifunctional 3D-Printed Ultra-Lightweight Engineered Cementitious Composites:
    Mechanical Properties and Self-Sensing Function
29. Mudi Charitha, Gupta Souradeep, Basithali E. (2026-01)
    Influence of Engineered Natural Fiber Reinforcement in 3D Printed Earth-Based Cementitious Composites:
    Fresh and Hardened Properties
30. Luo Xiaoyu, Shi Hao, Wu Ye, Chen Jiacheng et al. (2026-01)
    Inter-Filaments Pore Features and Tensile Properties of 3D Printed Concrete with Different Overlap
31. Shi Mingxue, Liu Chunpeng, Yao Yutong, Tan Zipeng et al. (2026-01)
    An Investigation of the Mechanical Properties Affecting 3D Printed Asphalt Concrete
32. Bharti Mrityunjay, Menon Arun, Santhanam Manu (2026-01)
    Experimental Study of Hardened Properties of 3D-Printed Concrete Under Compression, Tension and Shear Considering Interlayer Influence
33. Lin Yilin, Zeng Tao, Wang Yuting, Li Dehui et al. (2026-01)
    Printable and Mechanical Properties of 3D-Printed Nano-Silica Modified Concretes
34. Singh Amardeep, Sun Jingting, Qi Deng, Abden Md et al. (2026-01)
    Evaluating Glass Powder Substitution for 3D Printed Concrete:
    Effects on Thermal Properties and Embodied Carbon
35. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud (2026-01)
    Effect of Fly Ash, Basalt Fiber and Attapulgite Nanoclay on the Fresh Properties, Rheology and Shrinkage Behaviour of Printable Concrete
36. Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2026-01)
    Enhancing Fiber Alignment and Tensile Properties of 3D-Printed Ultra-High Performance Strain-Hardening Cementitious Composites by Nozzle Channel Design
37. Talukdar A., Belek Fialho Teixeira Müge, Fawzia Sabrina, Zahra Tatheer et al. (2026-01)
    Investigation on the Fresh and Mechanical Properties of Low Carbon 3D Printed Concrete Incorporating Sugarcane Bagasse Ash and Microfibers
38. Tinoco Matheus, Márquez Álvaro, Ramallo Laura, Barluenga Gonzalo et al. (2026-01)
    Effect of Cellulose Microfibers on Rheological Properties and Printability of 3D Printable Cement-Based Composites
39. Zhu Binrong, Qi Miao, Chen Wei, Pan Jinlong (2025-12)
    Anisotropic Mechanical Properties of 3D Printed Low-Carbon Concrete and Connection Strategies for Large-Scale Reusable Formwork in Digital Construction
40. Cui Xiaoshuang, Pu Xianghao, Zhang Dongyang, Li Weihong et al. (2025-12)
    Study on the Mechanical Properties of 3D-Printed Continuous Jute Yarn-Reinforced Concrete
41. Deetman Arjen, Suiker Akke (2025-12)
    Characterization of Early-Age Elastic–Plastic Properties of 3D Printed Materials Using Indentation Testing
42. Wang Xiangyu, Li Baidian, Wu Fei, Gu Kan et al. (2025-12)
    Enhancing Interlayer Properties and Sustainability of 3D-Printed UHPC with Antimony Tailings
43. Ding Tao, Wei Jun, Sun Jingting, Feng Kaikai (2025-12)
    Experimental Study on Thermal Properties of 3D Printed Concrete with Recycled Sand and Powder
44. Yan Yufei, Zhang Mo, Ma Guowei (2025-12)
    Synergistic Effect of Multi-Supplementary Materials on Rheology and Ultra-Early Stage Properties of 3D Printable FA-GBFS Geopolymer
45. Liu Mei, Wang Huai, Li Yang, Li Xiulin et al. (2025-12)
    Post-Fire Mechanical Properties of 3D Printed Concrete Under Different Cooling Methods
46. Xiao Wei (2025-12)
    Research on the Mechanical and Durability Properties of Carbon Fiber Reinforced 3D Printed Concrete
47. Zhang Genbao, Chen Lingke, Liu Miao, Morsy Amr et al. (2025-12)
    Enhancing the Shear Properties of U-Shaped Steel Wire Mesh Reinforced 3D Printed Composites
48. Cao Jing, Yang Xiaojie, Shi Yaming, Yang Yi et al. (2025-12)
    Numerical Analysis of Mechanical Properties of Steel Fiber Composite Cement Mortar Considering Non-Uniformity in 3D Printing.
49. Öztürk Ece, Ince Ceren, Borgianni Yuri, Nicolaides Demetris et al. (2025-12)
    Printability, Engineering Properties and Environmental Implications of 3D-Printed Cementitious Mortars Incorporating Hydrated Lime, Tile Powder and Accelerator
50. Ramezani Mahyar, Kilic Ugur, Sherif Muhammad, Arce Gabriel et al. (2025-12)
    Rheological Properties and Mechanical Response of Bio-Based Graphene Enhanced Additively Manufactured Cementitious Composites
51. Feng Hu, Yuan Xiang, Yu Zhenyu, Guo Aofei et al. (2025-12)
    Printability and Rheological Properties of 3D Printing Ultra-High Ductility Magnesium Phosphate Cement-Based Composites
52. Ruiz Pedro, Moreno Inna, García-Alvarado Rodrigo (2025-11)
    On the Tectonic Properties of 3D Printed Architecture:
    On the Tectonic Properties of 3D Printed Architecture
53. Meier Niklas, Herding Friedrich, Zetzener Harald, Mai (née Dressler) Inka et al. (2025-11)
    Surface Modification of Bulk Material for Particle Bed 3D Concrete Printing:
    Effect on Wettability, Porosity, and Mechanical Properties
54. Raza Ali, Tan Binglin, Jiajia Zhou, Umar Muhammad et al. (2025-11)
    Evaluation of Mechanical and Microstructural Properties of Sustainable 3D-Printed Engineered Cementitious Composites Incorporating Hybrid PE/PVA Fibers and Yellow River Sand
55. Li Jiannan, Singh Amardeep, Zhao Yasong, Sun Jingting et al. (2025-11)
    Enhancing Thermo-Mechanical and Moisture Properties of 3D-Printed Concrete Through Recycled Ultra-Fine Waste Glass Powder:
    Corrigendum
56. Liu Xianda, Sun Junbo, Chen Hui, Liu Chang et al. (2025-11)
    3D Printed Concrete with Red Mud Incorporation:
    Influence of Red Mud Manufacturing Procedures on Mechanical Properties at Elevated Temperatures
57. Oh Sangwoo, Lee Jinsuk, Oh Gyujong, Choi Seongcheol (2025-11)
    Effects of the Combined Incorporation of Superabsorbent Polymers and Polyvinyl Alcohol Fibers on Material Properties of 3D Printable Mortar:
    Rheology, Shrinkage, and Mechanical Behavior
58. Tang Can, Zhou Yujie, Mehmood Awais, Rania Chlihi et al. (2025-11)
    A Novel 3D-Printed Negative Poisson's Ratio Grid-Reinforced Cement-Based Composite Wall Structure:
    Design, Fabrication, and Compressive Properties
59. Hasan Md, Xu Jie, Uddin Md (2025-11)
    A Critical Review of 3D Printed Fiber-Based Geopolymer Concrete:
    Fresh Properties, Mechanical Performance, and Current Limitations
60. Khalid Lawand, Mermerdaş Kasım, Ekmen Şevin, Khidhir Bzeni Dillshad (2025-11)
    Optimization of Fresh and Hardened Properties of Fiber-Reinforced 3D Printed Geopolymer Composites Using Response Surface Methodology:
    A Data-Driven Approach Based on Prior Experimental Studies
61. Song Qiang, Zhou Guangyu, Bao Hailing, Liu Qiong (2025-11)
    Study on the Effects of Nozzle Proximal Carbonation Mixing and Vacuum Dewatering on the Printability and Mechanical Properties of the 3D Printed Construction Mortar
62. Zhu Xiaowei, Zhang Xudong, Zhang Jicheng, Chen Miao et al. (2025-11)
    Study on Anisotropic Thermal and Mechanical Properties of 3D-Printed Scrap-Aerogel-Incorporated Concrete
63. Flor Juncal Luis, Scott Allan, Clucas Don, Loporcaro Giuseppe (2025-11)
    Influence of Alternative Supplementary Cementitious Materials and Printing Parameters on the Mechanical Properties of 3D-Printed Mortars
64. Chen Wenguang, Yu Jie, Ye Junhong, Yu Jiangtao et al. (2025-11)
    3D Printed High-Performance Fiber-Reinforced Cementitious Composites:
    Fresh, Mechanical, and Microstructural Properties
65. Sakolaree Natthanicha, Taweesint Jutamas, Sungsiri Krisana, Assawamankongcharoen Sirikamol et al. (2025-11)
    Evaluation of Fresh and Mechanical Properties and Shrinkage of Hydrophobic Mortar Containing Microfiber for 3D Printing Technology
66. Janani Parthiban, Ganesh G. (2025-11)
    Synergistic Effects of Polypropylene Fibers on the Strength and Durability Properties of 3D Printed Concrete
67. Hasani Alireza, Dorafshan Sattar (2025-11)
    Evaluation of Fresh, Hardened, and Durability Properties of Three-Dimensional Concrete Printed Pipes
68. Liu Renlong, Cheng Zhangqi (2025-10)
    Interlayer Fracture Properties of 3D-Printed Cement-Based Structures:
    Influencing Factors and Mechanisms
69. González-Aviña J., Hosseinpoor Masoud, Yahia Ammar, Kohandelnia Mojtaba et al. (2025-10)
    Anionic Biopolymers to Enhance Concrete Rheological Properties for 3D Printing Applications
70. Gao Shan, Li Tianyu, Yuan Jian, Nishiwaki Tomoya et al. (2025-10)
    Mechanical Properties of 3D-Printed Molybdenum Tailings Mortar
71. Ngo Than, Li Shuai, Huynh Tien, Zhang Y. et al. (2025-10)
    3D Printable Hemp Concrete:
    Rheological, Mechanical, and Microstructural Properties
72. Crook Thomas, Li Matthew, Buswell Richard, Allinson David (2025-10)
    Anisotropic Hygrothermal Properties of 3D Printed Concrete
73. Akgümüş Fatih, Şahin Hatice, Mardani Ali (2025-10)
    Investigation of Waste Steel Fiber Usage Rate and Length Change on Some Fresh State Properties of 3D Printable Concrete Mixtures
74. Wang Huai, Li Xiulin, Gong Hao, Xu Jingjie et al. (2025-10)
    Thermal and Mechanical Properties of 3D-Printed Fiber-Reinforced Lightweight Concrete Based on Air Entrainment and Hollow Glass Microspheres
75. Xia Kailun, Chen Yuning, Jia Lutao, Quan Shitao et al. (2025-10)
    The Impact of Internal Stress Generated During the Printing Process on the Early-Age Properties of 3D Printed Concrete
76. Xiao Jianzhuang, He Yao, Yu Miao, Wang Changhao et al. (2025-10)
    Effects of Pressurized CO2 Mixing on the Properties of Mortar
77. Ma Wei, Chen Junjie, Dai Yuntong, Zhou Yaya et al. (2025-10)
    Mechanical Properties of 3D Printed Concrete Irregular Structural Formwork:
    Experimental Study and Finite Element Analysis
78. Lange David, Shen Chuanyue (2025-10)
    Modeling the Fresh Properties of Cement-Based Materials for 3D Concrete Printing
79. Sabouni Reem, Martini Samer (2025-09)
    Characterization of 3D Printed Concrete Mixtures Developed Using Local UAE Materials Based on Rheological Properties
80. Gencel Osman, Nodehi Mehrab, Subaşı Serkan, Ustaoğlu Abid et al. (2025-09)
    Properties of 3D Printed Concrete Containing Microencapsulated Phase Change Material
81. Jiang Youbau, Wen Jun, Gao Pengxiang, Liu Yan et al. (2025-09)
    Effect of Graphene Oxide on Physical and Mechanical Properties of 3D Printed Concrete
82. Li Fuhai, Xiao Sai, Yang Bo, Li Kepu et al. (2025-09)
    Mechanical Properties and Anisotropy of 3D-Printed Concrete Modified with Multiscale Materials Based on Optimized Printing Process Design
83. Lyu Libo, Li Weihong, Deng Yongjie, Yu Qiuchun et al. (2025-08)
    Engineering Properties of Magnesium Phosphate Cement Lunar Soil Concrete Under Vacuum Conditions and Its 3D Printing Application for Lunar Dome Model
84. Zhou Yuecheng, Xiao Sai, Li Haonian, Wang Chong et al. (2025-08)
    Study on the Rheological Properties and Printability of Multi-Scale Material Modified Mortar for 3D Printing
85. Maroszek Marcin, Hager Izabela, Mróz Katarzyna, Sitarz Mateusz et al. (2025-08)
    Anisotropy of Mechanical Properties of 3D-Printed Materials:
    Influence of Application Time of Subsequent Layers
86. Si Wen, Khan Mehran, McNally Ciaran (2025-08)
    Effect of Nano Silica with High Replacement of GGBS on Enhancing Mechanical Properties and Rheology of 3D Printed Concrete
87. Yang Xia, Wang Jiuyuan, Huang Han, Wu Gengchen et al. (2025-08)
    Anti-Washout Cement-Based Material for Under-Seawater 3D Concrete Printing:
    Design, Mechanical Properties and Microstructural Analysis
88. Mani Aravindhraj, Sekar Muthu (2025-08)
    NDT Techniques for Evaluating Mechanical Properties in Green and Fiber-Reinforced 3D Printable Mixes
89. Wang Suguo, Wang Xing, Yan Xueyuan, Chen Shanghong (2025-08)
    Effects of Aggregate Size and Nozzle Diameter on Printability and Mechanical Properties of 3D Printed Ferronickel Slag-GGBFS Concrete
90. Panchal Priyanka, Choi Myoungsung (2025-07)
    A Review on Effect of Natural Fibers to Mitigate CO2 Footprint and Enhance Engineering Properties of 3D Printing Concrete
91. Ravichandran Darssni, Prem Prabhat, Bhaskara Gollapalli, Maheswaran Srinivasan et al. (2025-07)
    Time-Dependent Properties of 3D Printable Plain and Fibered High Strength Concrete Incorporating Copper Slag as an Alternate Fine Aggregate
92. Pan Keheng, Cheng Yinhan, Qu Guangfei, Yuan Zheng et al. (2025-07)
    Development and Optimization of Geopolymer-Based 3D Printing Materials Utilizing Industrial Solid Waste:
    Rheological Properties and Practical Applications
93. Ding Shengxuan, Li Jiren, Wang Mingqiang (2025-07)
    Study on Mechanical Properties of Composite Basalt Fiber 3D-Printed Concrete Based on 3D Meso-Structure
94. Pemas Sotirios, Baliakas Dimitrios, Pechlivani Eleftheria, Stefanidou Maria (2025-07)
    Mechanical Properties of Bio-Printed Mortars with Bio-Additives for Green and Sustainable Construction
95. Ma Jinyi, Zhang Haiyan, Wang Yanzhi, Xiong Lu et al. (2025-07)
    Effect of Clay Brick Powder and Recycled Fine Aggregates on Properties of 3D Printed Concrete After High Temperature Exposure
96. Zafar Muhammad, Javadnejad Farid, Hojati Maryam (2025-07)
    Optimizing Rheological Properties of 3D Printed Cementitious Materials via Ensemble Machine Learning
97. Mim Nusrat, Hosan Anwar, Shaikh Faiz, Sarker Prabir (2025-07)
    Rheological and Early Age Mechanical Properties of 3D Printed Concrete Containing Copper Heap Leach Residue as Fine Aggregate
98. Kellnerová Vendula, David Tomáš, Reiterman Pavel (2025-07)
    Modification of Properties of Fresh Mixture for 3D Printing Using Cement-Based Mortar
99. Liu Qiang, Zhang Xinwei, Jiang Quan, Xia Yong et al. (2025-07)
    Effects of Nano-Al2O3, Nano-MgO and Nano-Fe2O3 on the Properties of Cement-Based 3D Printing:
    A Comparative Study
100. Ali Syed, Haq Mohd, Khan Rizwan, Hashmi Ahmad (2025-07)
     A Comprehensive Review on 3D Printing of Concrete:
     Materials, Methods and Mechanical Properties
101. Robens-Radermacher Annika, Kujath Cezary, Bos Freek, Mechtcherine Viktor et al. (2025-06)
     Design and Implementation of a Database System for Querying, Sharing, and Analyzing Experimental Data:
     Mechanical Properties of 3D Printed Concrete
102. Bos Freek, Menna Costantino, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
     Approach and Main Results:
     Mechanical Properties of 3D Printed Concrete
103. Mechtcherine Viktor, Muthukrishnan Shravan, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
     Compressive Strength and Modulus of Elasticity:
     Mechanical Properties of 3D Printed Concrete
104. Wolfs Robert, Versteege Jelle, Santhanam Manu, Bhattacherjee Shantanu et al. (2025-06)
     Flexural and Tensile Strength:
     Mechanical Properties of 3D Printed Concrete
105. Ding Shengxuan, Li Jiren, Liu Yiming (2025-06)
     Study on Mechanical Properties and Environmental Benefits of 3D Printed Lean Magnesium Ore Concrete Filled Columns Based on Three-Dimensional Meso-Structure
106. Hermida José, Saavedra Ruth, Hidalgo-Astudillo Samantha, Tošić Nikola et al. (2025-06)
     Influence of Fine Recycled Aggregates on the Properties of 3D Printing Concrete
107. Radl Elisabeth, Pfleger Marc-Patrick, Sieh Alexander, Vill Markus (2025-06)
     Conceptual Design and Production of a 3D Printed Concrete Base Brick with Evaluation of Its Thermal Properties
108. Gailitis Rihards, Radina Liga, Pakrastins Leonids, Sprince Andina (2025-06)
     Mechanical and Early Long-Term Property Assessment of Foamed 3D-Printable Geopolymer Composite
109. Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2025-06)
     Effects of Nozzle Thickness on the Mechanical Properties of 3D Printable Ultra-High Performance Strain-Hardening Cementitious Composites (UHP-SHCC)
110. Girskas Giedrius, Kligys Modestas (2025-06)
     3D Concrete Printing Review:
     Equipment, Materials, Mix Design, and Properties
111. Surehali Sahil, Venkatachalam Akshay, Divigalpitiya Ranjith, Kumar Aditya et al. (2025-06)
     Ultra-Low Dosages of Novel Graphene Types Enhance the Rheological Properties and Buildability of 3D Printed Binders
112. Pham Thi, Nguyen Thi, Huang Jie (2025-06)
     Experimental Study on Anisotropic Mechanical Properties of 3D Reinforced Concrete with Discrete Polyethylene Fibers
113. Tinoco Matheus, Toledo Filho Romildo, Mendoza Reales Oscar (2025-06)
     Rice Husk Bio-Aggregates for 3D Printing in Construction:
     Balancing Fresh and Hardened Properties
114. Sonebi Mohammed, Kaushik Sandipan, Amziane Sofiane, Hamill Gerard (2025-06)
     Optimization of Rheological and Hardened Properties of 3D Concrete Printing
115. Tinoco Matheus, Márquez Álvaro, Ramallo Laura, Barluenga Gonzalo et al. (2025-06)
     Fresh and Hardened Properties of Cellulose Fiber-Reinforced Mortars for 3D Printing in Construction
116. Ding Tao, Qu Changwei, Guo Dingming (2025-06)
     Thermal and Mechanical Properties of 3D Printed Functionally Graded Concrete:
     Utilizing Fibers and Recycled Aggregates as Gradient Components
117. Lin Xing-Tao, Xu Shuhao, Chen Xiangsheng, Huang Zhongkai (2025-06)
     3D Printed Concrete Tunnel Lining:
     Comparative Study on Mechanical Properties of Curved and Straight Printed Specimens
118. Su Yanli, Wu Chang, Shang Jiaqi, Zhang Pu (2025-06)
     Mechanical Properties of 3D-Printed High-Ductility Cementitious Composite with Sulphoaluminate Cement and Modified Crumb Rubber
119. Kumar Sandeep, Kumar Abhishek, Pundir Aakanksha, Dwivedi Ashutosh et al. (2025-06)
     Low-Clay Soil as Fine Aggregate in 3D Printed Concrete:
     Insights into Fresh and Hardened Properties
120. Zhu Xingyi, Anwar Muhammad, Deng Guomin, Wang Xiaoming et al. (2025-05)
     Effect of Microwave Heating Under Varying Exposure Conditions on Rheological Properties, Interlayer Bond and Buildability Performance of 3D-Printed Geopolymer
121. Song Xinlei, Xu Quanbiao, Wang Hailong, Sun Xiaoyan et al. (2025-05)
     Flowability-Dependent Anisotropic Mechanical Properties of 3D Printing Concrete:
     Experimental and Theoretical Study
122. Mohamed Osama, Mishra Anamika, Isam Fida (2025-05)
     An Overview of 3D Printed Concrete for Building Structures:
     Material Properties, Sustainability, Future Opportunities, and Challenges
123. Bhowmik Anirban, Bhattacharjee Biswajoy, Sahu Prakash (2025-05)
     A Comprehensive Analysis on Material Properties and Specialized Applications in 3D Concrete Printing
124. Qi Pengfei, Wang Ziyuan, Yu Ruifang, Pei Qiang et al. (2025-05)
     Optimization Design and Regression Model Analysis of Mechanical Properties of 3D Printed Concrete
125. Nieświec Martyna, Chajec Adrian, Šavija Branko (2025-05)
     Effect of Ground Copper Slag on the Fresh Properties of 3d Printed Cementitious Composites
126. Ding Tao, Peng Zechen, Dong Haining (2025-05)
     Mechanical Properties of CFRP Grid Reinforced 3D Printed Concrete Arch Structures
127. Tang Boyang, Yan Jiachuan, Han Xiaoyu, Lin Yini et al. (2025-05)
     Mechanical Properties of Extrusion-Based 3D-Printed Concrete Considering the Thickness of the Printed Layer and Printing Time Interval
128. Avşar Yunus, Uysal Mücteba, Akca Abdullah (2025-05)
     Improvement of 3D Printing Properties of MgO Derived Binders by CO2 Curing in Hardened State
129. Asif Usama (2025-05)
     Comparative Analysis of Evolutionary Computational Methods for Predicting Mechanical Properties of Fiber-Reinforced 3D Printed Concrete
130. Zhang Bo, Tao Yaxin, Zhang Yi, Shields Yasmina et al. (2025-05)
     Mechanical Properties of 3D Printed Concrete with 2D Infill Patterns Including Print Path Crossings
131. Yang Shutong, Chen Zhengyuan, Lan Tian, Yang Tiange (2025-05)
     Quantitative Evaluation for Fracture Properties of 3D Printed Ultra-High-Performance Concrete Loaded in Different Directions
132. Lucen Hao, Hanxiong Lyu, Huanghua Zhang, Shipeng Zhang et al. (2025-05)
     Development of CO2-Activated Interface Enhancer to Improve the Interlayer Properties of 3D-Printed Concrete
133. Wang Guihua, Zhou Jiguo, Liu Haoyun, Zhang Jianming (2025-05)
     Rheological Properties and Mechanical Durability of 3D-Printed Concrete Based on Low-Field NMR
134. Thib Raghed, Taleb Maria, Belayachi Naima, Bulteel David et al. (2025-05)
     Hardened Properties of 3D Printable Mortars with Full Replacement of Natural Sand by Recycled Sand
135. Zhang Bo, Corte Wouter, Ooms Ticho, Wan-Wendner Roman (2025-05)
     Mechanical Properties of Particle-Bed 3D Printed Concrete Infill Patterns
136. Hashimoto Katsufumi, Nakase Kota, Yoshihara Rei, Honda Yoshiki et al. (2025-04)
     Evaluation and Investigation of Material and Mechanical Property of 3D Printed Concrete by Means of Non-Destructive Testing Methods
137. Tanyildizi Harun, Seloglu Maksut, Bakri Abdullah Mohd, Razak Rafiza et al. (2025-04)
     The Rheological and Mechanical Properties of 3D-Printed Geopolymers:
     A Review
138. Sun Yifan, Ma Siqi, Chen Qingze, Chen Guoliang et al. (2025-04)
     Lunar Regolith Simulant-Derived 3D-Printed Geopolymers with Optimized Mechanical and Thermal Management Properties
139. Si Qi, Zhang Wenna, Pan Zhihong, Zheng Jianqiang et al. (2025-04)
     Study on the Mechanical and Durability Properties of 3D-Printed Bamboo Fiber-Reinforced Concrete
140. Shen Jianyu, Ye Taohua, Xiao Jianzhuang, Li Shuisheng (2025-04)
     Mechanical and Thermal Properties of 3D Printed Earth Concrete Solidified by Geopolymers:
     A Study of Utilizing Excavated Clay
141. Xiong Baocheng, Liu Huanbao, Nie Ping, Li Xiaoxi et al. (2025-04)
     Effect of Different Surface Modification Methods of Small Particle Size Recycled Rubber Powder on Mechanical Properties of 3D Printed Concrete
142. Kompella Sriram, Levi Marinella, Ferrara Liberato (2025-04)
     Identifying Interlayer Fracture Properties in 3D Printed Concrete Specimens via Multidirectional Flexural Tests
143. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2025-04)
     Multiphysics Modelling for 3D Concrete Printing:
     From Printability to Hardened Properties
144. Over Derya, Ozbakan Nesil (2025-04)
     Effect of Recycled Aggregate Use on the Fresh State Properties of Limestone Calcined Clay Cement (LC3) Mortars
145. Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi (2025-04)
     Novel Strategy for Enhancing Rheological Properties and Interlayer Bonding in Underwater 3D Concrete Printing
146. Maralapalle Vedprakash, Kumavat Hemraj, Nadaf Maheboobsab, Zende Aijaz et al. (2025-04)
     Optimizing 3D Geopolymer Concrete for Sustainable Construction:
     A Review of Material Selection, Printing Methods, and Properties
147. Liu Chuanbei, Zou Mengtong, Chen Xuemei, Deng Yongjun et al. (2025-04)
     Feasibility Study of 3D-Printed Rubberized Concrete as a Permanent Formwork:
     Mechanical Properties, Interlayer Interface and Durability
148. Yassin Ahmed, Hafez Mohamed, Aboelhassan Mohamed (2025-04)
     Experimental and Numerical Investigation on the Effect of Different Types of Synthetic Fibers on the Flexure Behavior and Mechanical Properties of 3D Cementitious Composite Printing Provided with Cement CEM II/A-P
149. Cho Eunsan, Gwon Seongwoo, Cha Soowon, Shin Myoungsu (2025-04)
     Impact of Accelerator on Rheological Properties of Cement Composites with Cellulose Microfibers:
     3D Printing Perspective
150. Ravichandran Darssni, Prem Prabhat, Giridhar Greeshma, Bhaskara Gollapalli et al. (2025-04)
     Time-Dependent Properties of 3D-Printed UHPC with Silica Sand, Copper Slag, and Fibers
151. Tseng Kuo-Chang, Chi Maochieh, Yeih Weichung, Huang Ran (2025-04)
     Influence of Slag/Fly Ash as Partial Cement Replacement on Printability and Mechanical Properties of 3D-Printed Concrete
152. Tran Mien, Le Thanh, Cao Nguyen, Nguyen Thi (2025-03)
     Sustainable Prospect for Entire Replacement of River Sand with Recycled Glass Aggregate in 3D Printing Concrete:
     Rheological Properties, Printability, and Alkali-Silica Reaction
153. Nieświec Martyna, Chajec Adrian (2025-03)
     Effect of Materials on the Properties of Fresh Cementitious Composites for 3D Printing:
     Short Review
154. Koszela Kamila, Chajec Adrian (2025-03)
     Sustainable Additive Manufacturing:
     How the Composition of the Cementitious Mix Influences Its Fresh Properties
155. Zat Tuani, Schuster Sílvio, Schmitt Duarte Ester, Freitas Daudt Natália et al. (2025-03)
     Rheological Properties of High-Performance Concrete Reinforced with Microfibers and Their Effects on 3D Printing Process
156. Khanverdi Mohsen, Das Sreekanta (2025-03)
     Testing Prisms as a Method for Assessing Compressive Properties of 3D-Printed Structural Members:
     Experimental and Numerical Studies
157. Yuan Hanquan, Dong Enlai, Jia Zijian, Jia Lutao et al. (2025-03)
     The Influence of Pore Structure and Fiber Orientation on Anisotropic Mechanical Property of 3D Printed Ultra-High-Performance Concrete
158. Givkashi Mohammad, Moodi Faramarz, Ramezanianpour Amir (2025-03)
     Investigating Shrinkage and Mechanical Properties of 3D Printed Concretes Under Different Curing Conditions
159. Şahin Hatice, Kaya Yahya, Akgümüş Fatih, Mardani Naz et al. (2025-03)
     Degradation of Mechanical Properties of 3D Fiber Reinforced Printed Concrete Mixtures Exposed to Elevated Temperatures
160. Li Liqing, Shi Zhenkun, Wang Lei, Sui Yi et al. (2025-03)
     Experimental Study on Rheological Properties and 3D Printing of Simulated Lunar Soil Polymers
161. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Feys Dimitri et al. (2025-03)
     Evaluation of Fresh Properties of High Calcium Content Fly Ash-Based Alkali-Activated 3D-Printed Mortar
162. Aktürk Büşra, Ertuğrul Onur, Özen Ömer, Oktay Didem et al. (2025-03)
     Influence of Nano-Silica and R-MgO on Rheological Properties, 3D Printability, and Mechanical Properties of One-Part Sodium Carbonate-Activated Slag-Based Mixes
163. Li Qiyan, Wen Xiaodong, Gao Xiaojian (2025-02)
     Rheological and Mechanical Properties of 3D-Printable Magnesium-Oxysulfate-Cements
164. Givkashi Mohammad, Moodi Faramarz, Ramezanianpour Amir (2025-02)
     Effect of Air-Entraining Agent on Hardened Properties of 3D Printed Concrete with Emphasis on Permeability and Air Void Structure
165. Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Deng Qi et al. (2025-02)
     Fresh Properties and Rheological Behavior of 3D-Printed Cementitious Composites Incorporating Recycled PVC and Nylon Fibers:
     An Experimental Approach
166. Zhang Bo, Zhang Yi, Ye Yihang, Hao Lulu et al. (2025-02)
     Influence of Contacts in 2D Infill Patterns on Mechanical Properties of 3D Printed Concrete Structures
167. Yuan Yong, Fatoyinbo Imoleayo, Sheng Ruiyi, Wang Qiling et al. (2025-02)
     Advancing the Applicability of Recycled Municipal Solid Waste Incineration Bottom Ash as a Cement Substitute in Printable Concrete:
     Emphasis on Rheological and Microstructural Properties
168. Shen Qiang, Sun Dongpu, Lu Chenyu, Zhang Zhigang et al. (2025-02)
     Fresh and Anisotropic-Mechanical Properties of Polyoxymethylene Fibers Reinforced 3D Printable Cementitious Composites
169. Sapata Alise, Šinka Māris, Šahmenko Genādijs, Korat Bensa Lidija et al. (2025-02)
     Establishing Benchmark Properties for 3D-Printed Concrete:
     A Study of Printability, Strength, and Durability
170. Chourasia Ajay, Pal Biswajit, Kapoor Ashish (2025-02)
     Influence of Printing Direction and Interlayer Printing Time on the Bond Characteristics and Hardened Mechanical Properties of Agro-Industrial Waste-Based 3D Printed Concrete
171. An Xuehui, Liang Qimin, Li Pengfei, You Wei et al. (2025-02)
     Experimental Assessment on Printing Performance and Mechanical Properties of Underwater Self-Protecting 3D Printing Concrete
172. Srinivas Dodda, Panda Biranchi, Suraneni Prannoy, Sitharam Thallak (2025-01)
     Influence of Mixture-Composition and Carbonation-Curing on Properties of Sustainable 3D Printable Mortars
173. Chen Wei, Guan Yongying, Zhu Binrong, Han Jinsheng et al. (2025-01)
     Influence of Extruded Strip-Shape and Dimension on the Mechanical Properties and Pore-Characteristics of 3D Printed Geopolymer Concrete
174. Liu Xinhao, Hu Jiajun, Guo Xiaolu (2025-01)
     Improved Interlayer-Bonding of 3D Printed Fiber-Reinforced Geopolymer by Healing-Agents:
     Properties, Mechanism, and Environmental Impacts
175. Tanyildizi Harun, Coskun Ahmet, Seloglu Maksut, Durmaz Taner (2025-01)
     Examination of Mechanical Properties of 3D Printed Geopolymer-Mortar Using the Taguchi -Method
176. Sun Junbo, Wang Yufei, Yang Xin, Wang Haihong et al. (2025-01)
     Red Mud Utilization in Fiber-Reinforced 3D Printed Concrete:
     Mechanical Properties and Environmental Impact Analysis
177. Zhang Yonghong, Cui Suping, Yang Bohao, Wang Xinxin et al. (2025-01)
     Research on 3D Printing Concrete Mechanical Properties-Prediction-Model Based on Machine-Learning
178. Elango K., Saravanakumar R., Vivek D., Yuvaraj S. et al. (2025-01)
     A Critical Review of Fresh, Hardened and Durability Properties of 3D Printing Concrete
179. Lyu Qifeng, Wang Yalun, Chen Dongjian, Liu Shiyuan et al. (2025-01)
     Energy Storage Properties and Mechanical Strengths of 3D Printed Porous Concrete Structural Supercapacitors Reinforced by Electrodes Made of Carbon-Black-Coated Ni Foam
180. Aydoğan Olcay, Kelek Bedirhan, Dittel Gözdem, Bhat Shantanu et al. (2025-01)
     Performance of 3D Printed Mortar with Varying Textile Reinforcement Properties
181. Hassan Amer, Alomayri Thamer, Noaman Mohammed, Zhang Chunwei (2025-01)
     3D Printed Concrete for Sustainable Construction:
     A Review of Mechanical Properties and Environmental Impact
182. Omur Tarik, Akpunar Ahmet, Bingöl Ayşe, Oktay Büşra et al. (2025-01)
     The Influence of Phase-Change-Material Filled Three-Dimensional Printed Artificial Aggregates on the Properties of Blast-Furnace-Slag Based Alkali-Activated Concrete
183. Jiang Youbau, Gao Pengxiang, Adhikari Sondipon, Yao Xiaofei et al. (2024-12)
     Studies on the Mechanical Properties of Inter-Layer Interlocking 3D Printed Concrete Based on a Novel Nozzle
184. Sakhare Vishakha, Najar Mohamed, Deshpande Sachin (2024-12)
     Printing Performance of 3D Printed Geopolymer Through Pumpability, Extrudability, Buildability Properties:
     A Review
185. Zhao Zhihui, Cai Xianhuan, Chen Fan, Gong Yongfan et al. (2024-12)
     Effect of Wollastonite-Content on Rheology and Mechanical Properties of 3D Printed Magnesium-Potassium-Phosphate-Cement-Based Material of MgO-SiO2-K2HPO4
186. Liu Junxing, Li Peiqi, Piao Taiyan, Im Sumin et al. (2024-12)
     High-Alumina Cementitious Materials for Binder-Jetting 3D Printing:
     Exploring Suitable Mixing-Ratio and Curing-Solution for Improving Mechanical Properties and Hydration-Reaction
187. Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-12)
     Influence of the Nozzle Geometry on Mechanical Properties of 3D Printed Concrete:
     Experiment and Finite Element Study
188. Aminpour Nima, Memari Ali (2024-12)
     Analysis of Anisotropic Behavior in 3D Concrete Printing for Mechanical Property Evaluation
189. Gurunandan M., Mala Hiranya, Nanthagopalan Prakash (2024-12)
     Effect of Water-to-Binder, Aggregate-to-Binder-Ratio and Admixtures on Printability and Mechanical Properties of 3D Printable Mortar Mixtures
190. Zhang Yu, Yu Zhengxing, Zhang Yunsheng, Zhang Jiufu et al. (2024-12)
     Study on the Predictive Model for Continuous Build-Height of 3D Printed Concrete Based on Printability and Early Mechanical Properties
191. Bai Meiyan, Xiao Jianzhuang, Ding Tao, Yu Kequan (2024-12)
     Interfacial Bond-Properties Between 3D Printed Engineered Cementitious Composite and Post-Cast Concrete
192. Li Ben, Li Kaihang, Lyu Xuetao, Zhao Canhao et al. (2024-12)
     Microscopic Mechanism and Predicting Calculation on Mechanical Properties of Basalt-Fiber-Modified 3D Printing Cement-Based Materials
193. Khan Mirza, Ahmed Aayzaz, Ali Tariq, Qureshi Muhammad et al. (2024-12)
     Comprehensive Review of 3D Printed Concrete, Life Cycle Assessment, AI and ML Models:
     Materials, Engineered Properties and Techniques for Additive Manufacturing
194. Yaqub Walid, Aslani Farhad (2024-12)
     Mechanical Properties and Fire-Resistance of 3D Printed Cementitious Composites with Plastic Waste
195. Şahin Hatice, Akarsu Özenç Aliye, Saka Dinç Zaide, Mardani Ali et al. (2024-11)
     Investigation of Fresh and Hardened Properties of 3D Printable Concrete Containing Ozone-Modified Carbon-Fiber
196. Rasel Risul, Hossain Md, Zubayer Md, Zhang Chaoqun (2024-11)
     Exploring the Fresh and Rheology Properties of 3D Printed Concrete with Fiber-Reinforced Composites:
     A Novel Approach Using Machine Learning Techniques
197. Ge Yali, Yao Jie (2024-11)
     Influence of FA and HPMC on the Fresh Properties and Anisotropy of 3D Printing Engineered Cementitious Composites
198. Wang Lingyu, Zhang Yu, Wang Zhiyong, Chen Juan et al. (2024-11)
     Additive Manufacturing in Construction Using Unmanned Aerial Vehicle:
     Design, Implementation, and Material-Properties
199. Ali Mohd, Rub Rashid, Banat Fawzi, Kim Tae-Yeon (2024-11)
     Enhancing the Printing Quality and Mechanical Properties of 3D Printed Cement Composites with Date-Syrup-Based Graphene-Coated-Sand Hybrid
200. Kaya Ebru, Ciza Baraka, Yalçınkaya Çağlar, Felekoğlu Burak et al. (2024-11)
     Effect of Hydroxypropyl-Methylcellulose and Aggregate Volume on Fresh and Hardened Properties of 3D Printable Concrete
201. Luo Surong, Jin Wenhao, Wu Weihong, Zhang Kaijian (2024-11)
     Rheological and Mechanical Properties of Polyformaldehyde-Fiber-Reinforced 3D Printed High-Strength Concrete with the Addition of Fly-Ash
202. Wu Mushuang, Wang Zixiao, Chen Yuxuan, Zhu Mengyu et al. (2024-11)
     Effect of Steel-Slag on Rheological and Mechanical Properties of Sulfoaluminate-Cement-Based Sustainable 3D Printing Concrete
203. Ding Yahong, Tong Jiaqi, Zhang Meixiang, Guo Shuqi et al. (2024-11)
     Effect of Aggregate Gradation on the Properties of 3D Printed Recycled Coarse Aggregate Concrete
204. Lori Ali, Mehrali Mehdi (2024-11)
     Mechanical Properties and Crack-Deflection Mechanisms in 3D Printed Porous Geopolymers with Cellular Structures
205. Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Yang Min et al. (2024-11)
     Enhancing Mechanical Properties of 3D Printed Cementitious Composites Utilizing Hybrid Recycled PP and PET-Fibers
206. Wu Xikai, Shi Qingxuan, Huo Jian, Zhao Yu et al. (2024-11)
     Experimental Study on Buildability and Mechanical Properties of 3D Printing Cob
207. Li L., Fang Z., Chu S., Kwan Albert (2024-11)
     Improving Mechanical Properties of 3D Printed Mortar by Exploiting Synergistic Effects of Fly-Ash-Microsphere and Nano-Silica
208. Yasin Mazhar, Siddiqi Zahid, Ur Rehman Atteq, Noshin Sadaf et al. (2024-11)
     Innovative Early-Age Mechanical Properties of 3D Printable Mortar Enhanced with SBR-Latex and Kaolin
209. Soave Francesco, Muciaccia Giovanni, Ferrara Liberato (2024-11)
     An Indirect Methodology to Evaluate the Rheological Properties of a Digitally Fabricated Concrete Incorporating Corrosion Inhibitors
210. Zhi Zhenzhen, Guo Yanfei, Qi Huahui, Tan Hongbo et al. (2024-11)
     Effect of Alkali-Metal-Sulfates on Hydration Properties of Alpha-Calcium-Sulfate-Hemihydrate for 3D Printing
211. Skibicki Szymon, Dvořák Richard, Pazdera Luboš, Topolář Libor et al. (2024-11)
     Anisotropic Mechanical Properties of 3D Printed Mortar Determined by Standard Flexural and Compression-Test and Acoustic Emission
212. Li Jiannan, Singh Amardeep, Zhao Yasong, Sun Jingting et al. (2024-11)
     Enhancing Thermo-Mechanical and Moisture Properties of 3D Printed Concrete Through Recycled Ultra-Fine Waste-Glass-Powder
213. Wang Bolin, Yang Min, Liu Shilong, Liu Xianda et al. (2024-10)
     Research on Mechanical Properties of a 3D Concrete Printing Component-Optimized Path by Multi-Modal Analysis
214. Yang Yekai, Zhang Chiyu, Liu Zhongxian, Dong Liang et al. (2024-10)
     Effect of Hydration Process on the Inter-Layer Bond Tensile Mechanical Properties of Ultra-High-Performance Concrete for 3D Printing
215. Liu Chao, Zhang Yukun, Liu Huawei, Wu Yiwen et al. (2024-10)
     Inter-Layer Reinforced 3D Printed Concrete with Recycled Coarse Aggregate:
     Shear Properties and Enhancement Methods
216. Lin Yini, Yan Jiachuan, Sun Ming, Han Xiaoyu et al. (2024-10)
     Inter-Layer Cohesion in 3D Printed Concrete:
     The Role of Width-to-Height-Ratio in Modulating Transport Properties and Pore-Structure
217. Chen Yidong, Zhang Yunsheng, Quan Hongzhu, Liu Cheng et al. (2024-10)
     Early-Age Time-Dependent Mechanical Properties of 3D Printed Concrete with Coarse Aggregates
218. Cai Jianguo, Wang Jingsong, Zhang Qian, Du Caixia et al. (2024-10)
     State of the Art of Mechanical Properties of 3D Printed Concrete
219. Varela Hugo, Tinoco Matheus, Mendoza Reales Oscar, Toledo Filho Romildo et al. (2024-10)
     3D Printable Cement-Based Composites Reinforced with Sisal-Fibers:
     Rheology, Printability and Hardened Properties
220. Sorgenfrei Reese, Zandifaez Peyman, Zhou Hongyu, Fiske Michael (2024-10)
     Investigating the Effect of Air-Voids on the Mechanical Properties of 3D Printable Cementitious Composites
221. Lan Tian, Yang Shutong, Xu Mingqi, Chen Zhengyuan et al. (2024-10)
     Quantitative Assessment of Interfacial-Fracture-Properties in 3D Printed Alkali-Activated Recycled Sand Concrete Based on a Closed-Form Fracture-Model
222. Sun Junbo, Zhang Yanling, Wu Qi, Wang Yufei et al. (2024-10)
     3D Printed Concrete Incorporating Waste-Rubber:
     Anisotropic Properties and Environmental Impact-Analysis
223. Althoey Fadi, Zaid Osama, Ahmed Bilal, Elhadi Khaled (2024-10)
     Impact of Double Hooked Steel-Fibers and Nano-Kaolin-Clay on Fresh Properties of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete
224. Gyawali Biva, Haghnazar Ramtin, Akula Pavan, Alba Kamran et al. (2024-10)
     A Review on 3D Printing with Clay and Sawdust/Natural Fibers:
     Printability, Rheology, Properties, and Applications
225. Over Derya, Ozbakan Nesil, Bustani Mehmet, Karali Bulut (2024-10)
     An Investigation of Rheological Properties and Sustainability of Various 3D Printing Concrete Mixtures with Alternative Binders and Rheological Modifiers
226. Shen Kaige, Ding Tao, Cai Chen, Xiao Jianzhuang et al. (2024-09)
     Feasibility-Analysis of 3D Printed Concrete with Sludge-Incineration-Slag:
     Mechanical Properties and Environmental Impacts
227. Liu Xuelin, Sheng Haitao, Feng Binqing, Wang Liang et al. (2024-09)
     Development of Novel Alkaline-Electrolyzed-Water on the Properties of 3D Printed Calcium-Sulphoaluminate-Cement Composites
228. Tran Nhi, Tran Mien, Tran Jonathan, Nguyen Anh et al. (2024-09)
     Eco-Friendly 3D Printed Concrete Using Steel-Slag-Aggregate:
     Buildability, Printability and Mechanical Properties
229. Chajec Adrian, Šavija Branko (2024-09)
     The Effect of Using Surface Functionalized Granite-Powder-Waste on Fresh Properties of 3D Printed Cementitious Composites
230. Liu Xuelin, Sheng Haitao, Feng Binqing, Zhao Piqi et al. (2024-09)
     Effect of Potassium and Sodium-Based Electrolyzed Water on the Rheological Properties and Structural Build-Up of 3D Printed Cement Composites
231. Han Kang, Gu Fei, Yang Huashan, Tian Xinchen et al. (2024-09)
     PVA-Fiber-Reinforced Red Mud-Based Geopolymer for 3D Printing:
     Printability, Mechanical Properties and Microanalysis
232. Sheng Zhaoliang, Zhu Binrong, Cai Jingming, Han Jinsheng et al. (2024-09)
     Influence of Waste-Glass-Powder on Printability and Mechanical Properties of 3D Printing Geopolymer Concrete
233. Wang Xiangyu, Du Liangfen, Liu Zhenbang, Li Mingyang et al. (2024-09)
     3D Cementitious Composites Printing with Pretreated Recycled Crumb-Rubber:
     Mechanical and Acoustic Insulation Properties
234. Weger Daniel, Gartner Benjamin, Rausch Anne, Schießl-Pecka Angelika et al. (2024-09)
     Realization of a Reinforced SPI Façade:
     Direction-Dependent Material-Properties and Durability-Assessment
235. Ertuğrul Onur, Özen Ömer, Oktay Didem, Yazar Tuğrul et al. (2024-09)
     Improvement of Rheological Properties and Printability of Sodium-Carbonate Activated Slag-Based Systems
236. Rudolph Jennifer, Lowke Dirk (2024-09)
     Design and Characterisation of a Two-Component Mortar-System for Shotcrete 3D Printing:
     An Approach to the Targeted Control of Material-Properties
237. Zhan Yiyuan, Lesage Karel, Schutter Geert (2024-09)
     Mechanical Properties of 3D Printable Responsive Cement Mortar After Magnetic Intervention
238. Barbosa Marcella, Anjos Marcos, Maia José, Camões Aires et al. (2024-09)
     Effect of Expanded Perlite on the Properties of 3DCP Mixtures
239. Jacquet Yohan, Maierdan Yierfan, Kawashima Shiho, Perrot Arnaud (2024-09)
     Stability-Prediction of 3D Printable Fresh Construction Materials by Analyzing Thixotropic Compressive Properties Using Extensional Dynamic Mechanical Analysis
240. Foiles Dreycen, Negron-McFarlane Christian, Kreiger Eric, Kreiger Megan (2024-09)
     The Effect of Coarse/Fine Aggregate Ratios on the Properties of Additively Constructed Concrete
241. Joon Hillar, Peetrimägi Lauri (2024-09)
     Influence of Illitic Calcined Clay on Properties of Mixtures for 3D Concrete Printing
242. Jiang Yu, Tabbaa Abir, Daly Ronan (2024-09)
     Effects of Time-Dependent Rheological Properties of Cementitious Materials on the Print Quality of Extrusion-Based 3D Printing
243. Rodriguez Fabian, Foster Kyle, Fross Xavier, Schmidt Roty et al. (2024-09)
     Use of a Lignin-Based Admixture for Tailoring the Rheological Properties of Mortars for 3D Printing
244. Wei Yazhi, Zhang Hui (2024-09)
     Influence of Temperature and Humidity on Mechanical Properties of Calcined-Oyster-Shell-Powder-Modified 3D Printed Concrete
245. Yao Yiming, Zhang Jiawei, Sun Yuanfeng, Pi Yilin et al. (2024-08)
     Mechanical Properties and Failure Mechanism of 3D Printing Ultra-High-Performance Concrete
246. Mani Aravindhraj, Sekar Muthu (2024-08)
     Non-Destructive Testing Techniques for Investigating Mechanical Property and Porosity-Disparities in Extrusion 3D Printed Concrete
247. Thajeel Marwah, György L. (2024-08)
     Hardened Properties of 3D Printed Concrete Influenced by Anisotropy
248. Huseien Ghasan, Tan Shea, Saleh Ali, Lim Nor et al. (2024-08)
     Test-Procedures and Mechanical Properties of Three-Dimensional Printable Concrete Enclosing Different Mix-Proportions:
     A Review and Bibliometric Analysis
249. Fernand Muhirwa, Li Yaqi, Qian Qiwei, Chi Yin et al. (2024-08)
     Effects of Coarse Aggregates on 3D Printability and Mechanical Properties of Ultra-High-Performance Fiber-Reinforced Concrete
250. Givkashi Mohammad, Moodi Faramarz, Ramezanianpour Amir (2024-08)
     Effect of Pumping Process on the Properties of 3D Printed Concrete Containing Air-Entraining-Agent
251. Robayo-Salazar Rafael, Muñoz Miguel, Vargas Armando, Gutiérrez Ruby (2024-08)
     Effects of Incorporating Bentonite, Metakaolin, Microsilica, and Calcium-Carbonate on the Rheological Properties of Portland-Cement-Based 3D Printing Inks
252. Yu Qian, Zuo Qinxin, Zhang Yamei, Pan Jinlong (2024-08)
     An Investigation on Enhancing the Bonding Properties of 3D Printed Concrete Permanent Formwork and Post-Casted Concrete
253. Buschmann Birger, Henke Klaudius, Asshoff Carsten, Talke Daniel et al. (2024-08)
     Additive Manufacturing of Wood-Composite-Parts by Individual Layer Fabrication:
     Influence of Process Parameters on Product Properties
254. Şahin Hatice, Akgümüş Fatih, Mardani Ali (2024-08)
     Mechanical and Rheological Properties of Fiber‐Reinforced 3D Printable Concrete in Terms of Fiber Content and Aspect Ratio
255. Klik Przemysław, Cisowski Adam, Rządkowski Witold, Pyrzanowski Paweł et al. (2024-08)
     Investigation of Mechanical Properties of Structures Created with Use of Automatically Reinforced 3D Concrete Printing:
     Preliminary Study
256. Moini Mohamadreza, Rodriguez Fabian, Olek Jan, Youngblood Jeffrey et al. (2024-07)
     Mechanical Properties and Fracture Phenomena in 3D Printed Helical Cementitious Architected Materials Under Compression
257. Srinivas Dodda, Ventrapragada Durga, Panda Biranchi, Sitharam Thallak (2024-07)
     A Study on the Effect of Mixture Constituents on Washout-Resistance, Mechanical, and Transport Properties in the Context of Underwater 3D Concrete Printing
258. Luo Qiling, Yu Ke-Ke, Long Wujian, Zheng Shuyi et al. (2024-07)
     Influence of Different Types of Superabsorbent Polymers on Fresh Mechanical Properties and Inter-Layer Adhesion of 3D Printed Concrete
259. Wu Yiwen, Liu Chao, Liu Huawei, Bai Guoliang et al. (2024-07)
     Mechanism of the Influence of Multi-Scale Pore-Structure on the Triaxial Mechanical Properties of 3D Printed Concrete with Recycled Sand
260. Geng Zifan, Zhang Lizhi, Wu Zhiwen, Tay Yi et al. (2024-07)
     Mechanical Properties and Additive Manufacturing of Alkali-Activated Lunar Regolith in Artificial Lunar Environments
261. Jiang Fangming, Lin Manfang, Yu Kequan (2024-07)
     Mechanical Properties of 3D Printed ECC Beams Reinforced with FRP Mesh
262. Markovic Ivan, Horat Alexandra, Pantellini Danilo (2024-07)
     Optimization of Earth-Based Mixtures in Terms of 3D Printability and Mechanical Properties:
     Feasibility Study
263. Li Bingying, Ding Tao, Qu Changwei, Liu Wei (2024-07)
     Modification of Fresh and Hardened Properties of 3D Printed Recycled Mortar by Superabsorbent Polymers
264. Sovetova Meruyert, Calautit John (2024-07)
     Influence of Printing Parameters on the Thermal Properties of 3D Printed Construction Structures
265. Sariyev Bakytzhan, Konysbekov Alisher, Jexembayeva Assel, Konkanov Marat (2024-07)
     A Comparative Study of the Rheological Properties of a Fly-Ash-Based Geopolymer Reinforced with PP-Fiber for 3D Printing:
     An Experimental and Numerical Approach
266. Wang Yuting, Chen Meng, Zhang Tong, Zhang Mingzhong (2024-07)
     Hardening Properties and Microstructure of 3D Printed Engineered Cementitious Composites Based on Limestone-Calcined-Clay-Cement
267. Masoud Laith, Hammoud Ahmad, Mortada Youssef, Masad Eyad (2024-06)
     Rheological, Mechanical, and Microscopic Properties of Polypropylene-Fiber-Reinforced Geopolymer Concrete for Additive Manufacturing
268. Zhou Zhijie, Geng Jian, Jin Chen, Liu Genjin et al. (2024-06)
     Influence of Residue Soil on the Properties of Fly-Ash-Slag-Based Geopolymer Materials for 3D Printing
269. Muy Yeakleang, Courard Luc, Garnavault Xavier, Bulteel David et al. (2024-06)
     Mechanical Properties and Freezing and Thawing Behavior of 3D Printing Concrete Containing Recycled Fine Aggregates from Construction and Demolition Waste
270. Nakase Kota, Hashimoto Katsufumi, Sugiyama Takafumi, Kono Katsuya (2024-06)
     Influence of Print Paths on Mechanical Properties and Fracture Propagation of 3D Printed Concrete
271. Yang Chao, Xu Xinglong, Lei Zuxiang, Sun Junbo et al. (2024-06)
     Enhancing Mechanical Properties of Three-Dimensional Concrete at Elevated Temperatures Through Recycled Ceramic-Powder Treatment Methods
272. Parmigiani Silvia, Falliano Devid, Moro Sandro, Ferro Giuseppe et al. (2024-06)
     3D Printed Multi-Functional Foamed Concrete Building Components:
     Material-Properties, Component Design, and 3D Printing Application
273. Kilic Ugur, Soliman Nancy, Omran Ahmed, Ozbulut Osman (2024-06)
     Effects of Cellulose Nanofibrils on Rheological and Mechanical Properties of 3D Printable Cement Composites
274. Zhi Peng, Wu Yuching, Bai Meiyan (2024-06)
     Determining the Effect of Geometric and Dynamic Properties of Screws on Fiber-Orientation During FRC 3D Printing Based on Discrete Element Simulation
275. Šahmenko Genādijs, Puzule Līga, Sapata Alise, Šlosbergs Pēteris et al. (2024-06)
     Gypsum-Cement-Pozzolan Composites for 3D Printing:
     Properties and Life Cycle Assessment
276. Yan Kang-Tai, Wang Xian-Peng, Ding Yao, Li Lingzhi et al. (2024-06)
     3D Printed LC3-Based Lightweight Engineered Cementitious Composites:
     Fresh State, Hardened Material-Properties and Beam-Performance
277. Razzaghian Ghadikolaee Mehrdad, Pan Zhu, Cerro-Prada Elena, Korayem Asghar (2024-06)
     Fresh and Hardened Properties of 3D Printing Mortar Modified by Halloysite-Nanotube
278. Taqa Ala, Mohsen Mohamed, Aburumman Mervat, Naji Khalid et al. (2024-05)
     Nano-Fly-Ash and Clay for 3D Printing Concrete Buildings:
     A Fundamental Study of Rheological, Mechanical and Microstructural Properties
279. Rahman Mahfuzur, Rawat Sanket, Yang Chunhui, Mahil Ahmed et al. (2024-05)
     A Comprehensive Review on Fresh and Rheological Properties of 3D Printable Cementitious Composites
280. Liu Zhenbang, Li Mingyang, Wong Teck, Tan Ming (2024-05)
     Determine the Effects of Pore Properties on the Mechanical Performances of 3D Concrete Printing Units with Experimental and Numerical Methods
281. Liu Qiong, Tang Huilin, Chen Kailun, Peng Bin et al. (2024-05)
     Utilizing CO2 to Improve Plastic Shrinkage and Mechanical Properties of 3D Printed Mortar Made with Recycled Fine Aggregates
282. Stout Ivy, Godfrey Grant, Dayley Jenna, Rodriguez Dexter et al. (2024-05)
     Concrete Mixture Properties and Designs for Additive Manufacturing:
     A Review of 3D Concrete Printing
283. Bayrak Alper, Shaban Nefize, Seyedian Choubi Sepehr, Tuncer Emran et al. (2024-05)
     Spatial Variation of Physical, Mechanical, and Thermophysical Properties of 3D Printed Concrete Across a Full-Scale Wall
284. Tran Mien, Ly Duy-Khuong, Nguyen Tan, Tran Nhi (2024-05)
     Robust Prediction of Workability Properties for 3D Printing with Steel-Slag-Aggregate Using Bayesian Regularization and Evolution Algorithm
285. Capêto Ana, Jesus Manuel, Uribe Braian, Guimarães Ana et al. (2024-05)
     Building a Greener Future:
     Advancing Concrete Production Sustainability and the Thermal Properties of 3D Printed Mortars
286. Mu Ru, Chen Jiao, Qing Longbang, Fan Chunhao et al. (2024-05)
     Properties of a Steel-Fiber-Reinforced Cementitious Composite Stool with Digitally Distributed Steel-Fibers
287. Chen Anguo, Dai Pengfei, Lyu Qifeng (2024-05)
     Effect of Alkalized Straw-Fibers on the Properties of Three Dimensional Printed Cementitious Composite
288. Boddepalli Uday, Gandhi Indu, Panda Biranchi (2024-05)
     Synergistic Effect of Fly-Ash and Polyvinyl-Alcohol-Fibers in Improving Stability, Rheology, and Mechanical Properties of 3D Printable Foam-Concrete
289. Yang Jin, Zhai Gaoyuan, He Xingyang, Tang Yuanzhen et al. (2024-05)
     Properties and Microstructure of a Low-Carbon Clinker-Free Cementitious Binder and Its Extrusion-Based Printing Performance
290. Huang Tao, Peng Zhongqi, Wang Mengge, Feng Shuang (2024-04)
     Study on the Ionic Transport Properties of 3D Printed Concrete
291. Yang Yekai, Lu Pengyuan, Liu Zhongxian, Dong Liang et al. (2024-04)
     Effect of Steel-Fiber with Different Orientations on Mechanical Properties of 3D Printed Steel-Fiber-Reinforced Concrete:
     Meso-Scale Finite-Element-Analysis
292. Zaid Osama, Ouni Mohamed (2024-04)
     Advancements in 3D Printing of Cementitious Materials:
     A Review of Mineral Additives, Properties, and Systematic Developments
293. Corso Marla, Silva Maicon, Cardoso Flávia, Heck Stenio et al. (2024-04)
     Effect of the Addition of Graphite and Graphene-Oxide in the Mechanical Properties and Adsorption of CO2 in Cementitious Filaments
294. Balasubramanian Dhayalini, Sasikumar Athira, Govindaraj Vishnuvarthanan (2024-04)
     Study on Criticality of Coarse Aggregate Content on Early-Age Properties of 3D Printable Concrete
295. Jia Zijian, Kong Lingyu, Jia Lutao, Ma Lei et al. (2024-04)
     Printability and Mechanical Properties of 3D Printing Ultra-High-Performance Concrete Incorporating Limestone-Powder
296. Ding Yahong, Zhang Yaqi, Zhao Yu, Zhang Meixiang et al. (2024-04)
     Impact of Pre-Soaked Lime-Water-Carbonized Recycled Fine Aggregate on Mechanical Properties and Pore-Structure of 3D Printed Mortar
297. Tripathi Avinaya, Nair Sooraj, Chauhan Harshitsinh, Neithalath Narayanan (2024-04)
     Print Geometry Alterations and Layer-Staggering to Enhance Mechanical Properties of Plain and Fiber-Reinforced Three-Dimensional-Printed Concrete
298. Jia Zijian, Zhou Mengting, Chen Yu, Wang Wei et al. (2024-03)
     Effect of Steel-Fiber Shape and Content on Printability, Microstructure and Mechanical Properties of 3D Printable High-Strength Cementitious Materials
299. Ali Mohd, Nassrullah Ghaith, Al-Rub Rashid, Khaswaneh Bashar et al. (2024-03)
     Influence of Carbon-Nano-Tubes on Printing Quality and Mechanical Properties of 3D Printed Cementitious Materials
300. İlcan Hüseyin, Külak Adnan, Şahmaran Mustafa (2024-03)
     3D Printable Construction and Demolition Waste-Based Geopolymer:
     Investigating the Effects of Additives on Engineering Properties
301. Liu Xinhao, Hu Jiajun, Guo Xiaolu (2024-03)
     Printability and Inter-Layer Bonding Property of 3D Printed Fiber-Reinforced Geopolymer
302. Zhu Lingli, Zhao Wanting, Zhao Yu, Guan Xuemao (2024-03)
     Mechanism Analysis of Rheological Properties of 3D Printed Steel-Slag Cementitious Composite Based on Low-Field Nuclear-Magnetic-Relaxation-Test
303. Soda Prabhath, Dwivedi Ashutosh, Sahana C., Gupta Souradeep (2024-03)
     Development of 3D Printable Stabilized Earth-Based Construction Materials Using Excavated Soil:
     Evaluation of Fresh and Hardened Properties
304. Wu Yun-Chen, Wang Xinbo, Li Mo (2024-03)
     Role of Thixotropy in Inter-Layer Microstructure and Properties of Additively Manufactured Cementitious Materials
305. Dams Barrie, Chen Binling, Kaya Yusuf, Orr Lachlan et al. (2024-03)
     Fresh Properties and Autonomous Deposition of Pseudoplastic Cementitious Mortars for Aerial Additive Manufacturing
306. Liu Xiongfei, Wang Nan, Zhang Yi, Ma Guowei (2024-02)
     Optimization of Printing Precision and Mechanical Property for Powder-Based 3D Printed Magnesium Phosphate Cement Using Fly-Ash
307. Vigneshwari Are, Jayaprakash Jaganathan (2024-02)
     A Review on 3D Printable Cementitious Material Containing Copper and Iron-Ore-Tailings:
     Material-Characterization, Activation-Methods, Engineering-Properties, Durability, and Microstructure-Behavior
308. Kaliyavaradhan Senthil, Ambily Parukutty, Shekar Deepadharshan, Sebastian Shilpa (2024-02)
     Effect of Sand-Gradations on the Fresh Properties of 3D Printable Concrete
309. Ding Tao, Shen Kaige, Cai Chen, Xiao Jianzhuang et al. (2024-02)
     3D Printed Concrete with Sewage Sludge Ash:
     Fresh and Hardened Properties
310. Wang Xingjian, Naito Clay, Fox John, Bocchini Paolo (2024-02)
     Impact of Mix Proportions on Particle-Bed 3D Printed Concrete Properties
311. Colyn Markus, Zijl Gideon, Babafemi Adewumi (2024-02)
     Fresh and Strength Properties of 3D Printable Concrete Mixtures Utilising a High Volume of Sustainable Alternative Binders
312. Jia Lutao, Jia Zijian, Zhang Zedi, Tang Zhenzhong et al. (2024-02)
     Effect of Recycled Brick-Powder with Various Particle-Features on Early-Age Hydration, Water-State, and Rheological Properties of Blended Cement-Paste in the Context of 3D Printing
313. Zhao Guoqi, Fan Yichang, Tang Can, Wei Yuanyuan et al. (2024-02)
     Preparation and Compressive Properties of Cementitious Composites Reinforced by 3D Printed Cellular Structures with a Negative Poisson's Ratio
314. Zhou Longfei, Gou Mifeng, Ji Jiankai, Hou Xinran et al. (2024-02)
     Durability and Hardened Properties of 3D Printed Concrete Containing Bauxite-Tailings
315. Zhang Hongmei, Hu Fan, Duan Yuanfeng, Liao Jian et al. (2024-02)
     Mechanical Properties and Micro-Structure of Highly Flowable Geopolymer Composites with Low-Content Polyvinyl-Alcohol-Fiber
316. Tang Weichen, Sun Junbo, Wang Yufei, Chen Zhaohui et al. (2024-02)
     Electromagnetic Absorption Properties of 3D Printed Fiber-Oriented Composites Under Different Paths
317. Li Weihong, Chen Xuhao, Wang Yaoyu, Wan Detian et al. (2024-02)
     Effect of Embedded Filament Fibers on Mechanical Properties of 3D Printing Cement-Based Materials
318. Dulaj Albanela, Salet Theo, Lucas Sandra (2024-01)
     A Study of the Effects of MWCNTs on the Fresh and Hardened State Properties of 3D Printable Concrete
319. Wang Qinghua, Xu Jinggang, Feng Duo, Li Wei et al. (2024-01)
     Properties and Printability Evaluation of Three-Dimensional Printing Magnesium-Oxychloride Cement by Fully Utilizing Aeolian-Sand
320. Özalp Fatih (2024-01)
     Mechanical Behavior and Permeability Properties of Sustainable and High-Performance Anisotropic Three-Dimensional Printable Concrete
321. Liu Qiong, Cheng Shengbo, Peng Bin, Chen Kailun et al. (2024-01)
     The Buildability and Flexural Properties of 3D Printed Recycled Mortar Reinforced with Synchronized Steel-Cable Under Different Reinforcement Ratios
322. Dai Pengfei, Lyu Qifeng, Zong Meirong, Zhu Pinghua (2024-01)
     Effect of Waste-Plastic-Fibers on the Printability and Mechanical Properties of 3D Printed Cement Mortar
323. Lucen Hao, Long Li, Shipeng Zhang, Huanghua Zhang et al. (2023-12)
     The Synergistic Effect of Greenhouse Gas CO2 and Silica-Fume on the Properties of 3D Printed Mortar
324. Li Zihan, Liu Huanbao, Nie Ping, Cheng Xiang et al. (2023-12)
     Mechanical Properties of Concrete Reinforced with High-Performance Micro-Particles for 3D Concrete Printing
325. Azimi Zahir, Mousavi Moein, Bengar Habib, Javadi Akbar (2023-12)
     Study on the Post-Fire Mechanical Properties of Lightweight 3D Printed Concrete Containing Expanded Perlite as Partial Replacement of Natural Sand
326. Liu Ke, Takasu Koji, Jiang Jinming, Zu Kun et al. (2023-12)
     Mechanical Properties of 3D Printed Concrete Components:
     A Review
327. Li Yeou-Fong, Tsai Pei-Jen, Syu Jin-Yuan, Lok Man-Hoi et al. (2023-12)
     Mechanical Properties of 3D Printed Carbon Fiber-Reinforced Cement Mortar
328. Warsi Syed, Panda Biranchi, Biswas Pankaj (2023-12)
     Exploring Fiber Addition Methods and Mechanical Properties of Fiber-Reinforced 3D Printed Concrete:
     A Review
329. Freund Niklas, David Martin, Böhler David, Mai (née Dressler) Inka et al. (2023-12)
     Shotcrete 3D Printing:
     Interaction of Nozzle Geometry, Homogeneity and Hardened Concrete Properties
330. Mai (née Dressler) Inka, Herding Friedrich, Lowke Dirk (2023-12)
     Effect of Grain-Size and Layer-Thickness on Hardened State Properties in Selective Cement-Activation
331. Carvalho Ivo, Melo Abcael, Melo Carlos, Brito Mateus et al. (2023-12)
     Evaluation of the Effect of Rubber-Waste-Particles on the Rheological and Mechanical Properties of Cementitious Materials for 3D Printing
332. Liu Huawei, Liu Chao, Zhang Yamei, Bai Guoliang (2023-11)
     Bonding Properties Between 3D Printed Coarse Aggregate Concrete and Rebar Based on Interface Structural Characteristics
333. Zhi Peng, Wu Yuching, Rabczuk Timon (2023-11)
     Effects of Time-Varying Liquid Bridge Forces on Rheological Properties, and Resulting Extrudability and Constructability of Three-Dimensional Printing Mortar
334. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-11)
     Slag-Modified Metakaolin-Based 3D Printed Geopolymer:
     Mechanical Characterisation, Microstructural Properties, and Nitrogen Physisorption Pore-Analysis
335. Wang Yu, Rodriguez Fabian, Olek Jan, Zavattieri Pablo et al. (2023-11)
     Influence of Type of Fibers on Fresh and Hardened Properties of Three-Dimensional-Printed Cementitious Mortars
336. Xu Ping, Chen Tianyu, Fan Kaijun, Zhang Minxia (2023-11)
     Effect of Nano-Silica-Sol Dosage on the Properties of 3D Printed Concrete
337. Ungureanu Dragoș, Onuțu Cătălin, Țăranu Nicolae, Vornicu Nicoleta et al. (2023-11)
     Microstructure and Mechanical Properties of Cost-Efficient 3D Printed Concrete Reinforced with Polypropylene Fibers
338. Bhusal Shiva, Sedghi Reza, Hojati Maryam (2023-11)
     Evaluating the Printability and Rheological and Mechanical Properties of 3D Printed Earthen Mixes for Carbon-Neutral Buildings
339. Tong Jiaqi, Ding Yahong, Lv Xiuwen, Ning Wei (2023-11)
     Effect of Carbonated Recycled Coarse Aggregates on the Mechanical Properties of 3D Printed Recycled Concrete
340. Zou Mengtong, Liu Chuanbei, Zhang Keying, Li Wuqian et al. (2023-11)
     Evaluation and Control of Printability and Rheological Properties of 3D Printed Rubberized Concrete
341. Šána Vladimír, Litoš Jiří, Kolář Karel (2023-10)
     Mechanical Properties of the New Cement Composite Mixture Appropriate for Robotic Processing
342. Lyu Qifeng, Dai Pengfei, Chen Anguo (2023-10)
     Mechanical Strengths and Optical Properties of Translucent Concrete Manufactured by Mortar-Extrusion 3D Printing with Polymethyl-Methacrylate Fibers
343. Zhu Binrong, Wang Yufei, Sun Junbo, Wei Yang et al. (2023-10)
     An Experimental Study on the Influence of Waste-Rubber-Particles on the Compressive, Flexural and Impact Properties of 3D Printable Sustainable Cementitious Composites
344. Noaimat Yazeed, Chougan Mehdi, Albar Abdulrahman, Skibicki Szymon et al. (2023-10)
     Recycled Brick-Aggregates in One-Part Alkali-Activated Materials:
     Impact on 3D Printing Performance and Material-Properties
345. Sun Houchao, Li Furong, Shi Feiting (2023-10)
     Experimental Study on Dynamic Mechanical Properties of 3D Printed Cement-Based Materials Under Splitting Tension After High Temperature
346. Sedghi Reza, Zafar Muhammad, Hojati Maryam (2023-10)
     Exploring Fresh and Hardened Properties of Sustainable 3D Printed Lightweight Cementitious Mixtures
347. David Martin, Freund Niklas, Dröder Klaus, Lowke Dirk (2023-09)
     The Effects of Nozzle-Diameter and Length on the Resulting Strand Properties for Shotcrete 3D Printing
348. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2023-09)
     Anisotropic Properties of Additively Manufactured Concrete Elements
349. Zhu Lingli, Yao Jie, Zhao Yu, Ruan Wenqiang et al. (2023-09)
     Printability and Early Mechanical Properties of Material-Composition Modified 3D Printing Engineered Cementitious Composites Based on the Response-Surface-Methodology
350. Ingle Vaibhav, Kaliyavaradhan Senthil, Ambily Parukutty, Shekar Deepadharshan (2023-09)
     3D Printable Concrete Without Chemical Admixtures:
     Fresh and Hardened Properties
351. Cuevas Villalobos Karla, Weinhold Joachim, Stephan Dietmar, Kim Ji-Su (2023-09)
     Effect of Printing-Patterns on Pore-Related Microstructural Characteristics and Properties of Materials for 3D Concrete Printing Using In-Situ and Ex-Situ Imaging-Techniques
352. Bayat Hamid, Kashani Alireza (2023-09)
     Analysis of Rheological Properties and Printability of a 3D Printing Mortar Containing Silica-Fume, Hydrated Lime, and Blast-Furnace-Slag
353. Liu Zhenbang, Li Mingyang, Quah Tan, Wong Teck et al. (2023-09)
     Comprehensive Investigations on the Relationship Between the 3D Concrete Printing Failure Criterion and Properties of Fresh-State Cementitious Materials
354. Liu Yi, Wang Li, Yuan Qiang, Peng Jianwei (2023-09)
     Effect of Coarse Aggregate on Printability and Mechanical Properties of 3D Printed Concrete
355. Ji Xuping, Pan Tinghong, Liu Xingyao, Zhao Wenhao et al. (2023-09)
     Characterization of Thixotropic Properties of Fresh Cement‐Based Materials
356. Liu Xiaoshuang, Zou Yuxiao, Wu Yingxuan, Cui Dong et al. (2023-09)
     The Effect of U-Type Expanding Agent for Concrete (UEA) on the Microstructural and Mechanical Properties of Mortar Fabricated Through Alternate 3D Printing
357. Luo Fuming, Cui Peng, Tang Wei, Wu Chun-ran et al. (2023-09)
     Influences of Engineering Spoil on the Properties and Microstructure of 3D Printable Magnesium-Cement
358. Ahmadi Khatereh, Mousavi Seyed, Dehestani Mehdi (2023-09)
     Influence of Nano-Coated Micro-Steel-Fibers on Mechanical and Self-Healing Properties of 3D Printable Concrete Using Graphene-Oxide and Polyvinyl-Alcohol
359. Overmeir Anne, Šavija Branko, Bos Freek, Schlangen Erik (2023-08)
     3D Printable Strain-Hardening Cementitious Composites (3DP-SHCC):
     Tailoring Fresh and Hardened State Properties
360. Özkılıç Hamza, İlcan Hüseyin, Aminipour Ehsan, Tuğluca Merve et al. (2023-08)
     Bond Properties and Anisotropy Performance of 3D Printed Construction and Demolition Waste-Based Geopolymers:
     Effect of Operational- and Material-Oriented Parameters
361. Li Mingyang, Liu Zhixin, Ho Jin, Wong Teck (2023-08)
     Experimental Investigation of Fresh and Time-Dependent Rheological Properties of 3D Printed Cementitious Material
362. Alarrak Rashed, Jeon Byeonguk, Brand Alexander (2023-08)
     Fracture Properties of Extruded Fiber-Reinforced Mortar with Preferentially Aligned Fibers
363. Matos Paulo, Zat Tuani, Lima Marcelo, Neto José et al. (2023-08)
     Effect of the Superplasticizer-Addition Time on the Fresh Properties of 3D Printed Limestone-Calcined-Clay-Cement (LC³) Concrete
364. Wang Yang, Qiu Liu-Chao, Hu Yan-Ye, Cheng Song-Gui et al. (2023-08)
     Influential Factors on Mechanical Properties and Microscopic Characteristics of Underwater 3D Printing Concrete
365. Zhang Yi, Zhu Yanmei, Ren Qiang, He Bei et al. (2023-08)
     Comparison of Printability and Mechanical Properties of Rigid and Flexible Fiber-Reinforced 3D Printed Cement-Based Materials
366. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-08)
     Slag-Modified Fiber-Reinforced Metakaolin-Based Geopolymer for 3D Concrete Printing Application:
     Evaluating Fresh and Hardened Properties
367. Pessoa Ana Sofia, Jesus Manuel, Guimarães Ana, Lucas Sandra et al. (2023-07)
     Experimental Characterisation of Hygrothermal Properties of a 3D Printed Cementitious Mortar
368. Zhu Lingli, Zhang Meng, Zhang Yaqi, Yao Jie et al. (2023-07)
     Research Progress on Shrinkage Properties of Extruded 3D Printed Cement-Based Materials
369. Wang Hao, Jiang Minghui, Hang Meiyan, Zhou Gangming et al. (2023-07)
     Research on the Mechanical Properties and Frost-Resistance of Aeolian Sand 3D Printed Mortar
370. Arrêteau Manon, Fabien Aurélie, Haddaji Badreddine, Chateigner Daniel et al. (2023-07)
     Review of Advances in 3D Printing Technology of Cementitious Materials:
     Key Printing Parameters and Properties Characterization
371. Pott Ursula, Jakob Cordula, Dorn Tobias, Stephan Dietmar (2023-07)
     Investigation of a Shotcrete-Accelerator for Targeted Control of Material-Properties for 3D Concrete Printing Injection-Method
372. Kanyenze Simba, Joubert Dawid, Combrinck Riaan (2023-07)
     The Effect of Nanobubble Water on the Fresh Properties of Conventional Concrete and 3D Printing Concrete
373. Ibrahim Kamoru, Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-07)
     Hardened Properties of 3D Printed Limestone-Calcined-Clay-Cement Concrete
374. Litoš Jiří, Šána Vladimír, Uhlík Adam, Kolář Karel et al. (2023-07)
     Mechanical and Physical Properties of Cement Mixtures for 3D Processing
375. Schönsee Eric, Hüsken Götz, Jeyifous Olubunmi, Mezhov Alexander et al. (2023-06)
     Calculating Rheological Properties of Fresh Mortar for Additive Manufacturing Based on Experimental, Multi-Sensor Data
376. Mu Ru, Mei Shaolin, Wang Xiaowei, Chen Xiangshang et al. (2023-06)
     Mechanical Properties of a 3D Printed SFRC Beam with Steel-Fiber-Distribution Adaptive to Tensile Stress
377. Hou Shaodan, Duan Zhenhua, Ye Taohua, Zou Shuai et al. (2023-06)
     Mechanical Properties and Pore-Structure of 3D Printed Mortar with Recycled Powder
378. Xu Zhuoyue, Zhang Dawang, Li Hui, Yin Le et al. (2023-06)
     Effects of Additives on the Mechanical Properties, Rheology, and Printing Properties of PCC-Based 3DPMs
379. Liu Junli, Tran Jonathan, Nguyen Vuong, Gunasekara Chamila et al. (2023-06)
     3D Printing of Cementitious Mortar with Milled Recycled Carbon-Fibers:
     Influences of Filament Offset on Mechanical Properties
380. Chen Wei, Pan Jinlong, Zhu Binrong, Ma XiaoMeng et al. (2023-06)
     Improving Mechanical Properties of 3D Printable One-Part Geopolymer Concrete with Steel-Fiber-Reinforcement
381. Richter Christiane, Jungwirth Jörg (2023-06)
     3D Concrete Printing:
     From Mechanical Properties to Structural Analysis
382. Miri Zahra, Polak Maria, Baaj Hassan (2023-06)
     Finite-Element-Analysis of Hardened Properties of 3D Printed Concrete
383. Rahmat N., Ali Noorwirdawati, Abdullah Siti, Abdul Hamid Noor et al. (2023-06)
     Fresh Properties and Flexural Strength of 3D Printing Sustainable Concrete Containing GGBS as Partial Cement Replacement
384. Oh Sangwoo, Hong Geuntae, Choi Seongcheol (2023-05)
     Determining the Effect of Superabsorbent Polymers, Macrofibers, and Resting Time on the Rheological Properties of Cement Mortar Using Analysis of Variance:
     A 3D Printing Perspective
385. Ding Tao, Xiao Jianzhuang, Mechtcherine Viktor (2023-05)
     Microstructure and Mechanical Properties of Inter-Layer Regions in Extrusion-Based 3D Printed Concrete:
     A Critical Review
386. Sasikumar Athira, Balasubramanian Dhayalini, Senthil Kumaran M., Govindaraj Vishnuvarthanan (2023-05)
     Effect of Coarse Aggregate Content on the Rheological and Buildability Properties of 3D Printable Concrete
387. Sun Guangcheng, Wang Zhiguang, Yu Chengkun, Qian Xiaoqian et al. (2023-05)
     Properties and Microstructures of 3D Printable Sulphoaluminate-Cement Concrete Containing Industrial Byproducts and Nano-Clay
388. Liu Chao, Zhang Yamei, Banthia Nemkumar (2023-05)
     Unveiling Pore Formation and Its Influence on Micromechanical Property and Stress-Distribution of 3D Printed Foam-Concrete Modified with Hydroxypropyl-Methylcellulose and Silica-Fume
389. Bhushan Jindal Bharat, Jangra Parveen (2023-05)
     3D Printed Concrete:
     A Comprehensive Review of Raw Material’s Properties, Synthesis, Performance, and Potential Field Applications
390. Dias Bruno, Rocha Douglas, Faria Paulina, Lucas Sandra et al. (2023-04)
     Limes with Hydraulic Properties for 3D Printing Mortars
391. Gao Yanan, Hua Sudong, Yue Hongfei (2023-04)
     Study on Preparation and Rheological Properties of 3D Printed Pre-Foaming Concrete
392. Yu Qian, Zhu Binrong, Li Xuesen, Meng Lingqi et al. (2023-04)
     Investigation of the Rheological and Mechanical Properties of 3D Printed Eco-Friendly Concrete with Steel-Slag
393. Bai Meiyan, Wu Yuching, Xiao Jianzhuang, Ding Tao et al. (2023-04)
     Workability and Hardened Properties of 3D Printed Engineered Cementitious Composites Incorporating Recycled Sand and PE-Fibers
394. Şahin Hatice, Temel Müge, Mardani Ali (2023-04)
     Determination of Optimum VMA Utilization Dosage in Cementitious Systems:
     In Terms of Rheological and Flowability Properties
395. Ramezani Amir, Modaresi Shahriar, Dashti Pooria, Givkashi Mohammad et al. (2023-04)
     Effects of Different Types of Fibers on Fresh and Hardened Properties of Cement and Geopolymer-Based 3D Printed Mixtures:
     A Review
396. Ibrahim Kamoru, Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-03)
     Influence of Effective Micro-Organisms on the Rheology and Fresh State Properties of SCMs-Based Concrete for Digital Fabrication
397. Seo Eun-A, Kim Won-Woo, Kim Sung-Wook, Kwon Hongkyu et al. (2023-03)
     Mechanical Properties of 3D Printed Concrete with Coarse Aggregates and Polypropylene-Fiber in the Air and Underwater Environment
398. Wu Yiwen, Liu Chao, Bai Guoliang, Liu Huawei et al. (2023-03)
     3D Printed Concrete with Recycled Sand:
     Pore-Structure and Triaxial Compression Properties
399. Kilic Ugur, Ma Ji, Baharlou Ehsan, Ozbulut Osman (2023-03)
     Effects of Viscosity-Modifying Admixture and Nano-Clay on Fresh and Rheo-Viscoelastic Properties and Printability Characteristics of Cementitious Composites
400. Cui Weijiu, Wang Tianheng, Chen Xu, Shen Wenkai et al. (2023-03)
     Study of 3D Printed Concrete with Low-Carbon Cementitious Materials Based on Its Rheological Properties and Mechanical Performances
401. Sun Bochao, Li Peichen, Wang Dianchao, Ye Jun et al. (2023-03)
     Evaluation of Mechanical Properties and Anisotropy of 3D Printed Concrete at Different Temperatures
402. Ravichandran Darssni, Giridhar Greeshma, Ramamurthy Vignesh, Prem Prabhat (2023-03)
     Influence of Test-Protocol on Determining the Rheological Properties of Cement-Pastes-Mixtures for Concrete 3D Printing
403. Dey Dhrutiman, Sahu Akshay, Prakash Srajan, Panda Biranchi (2023-03)
     A Study into the Effect of Material-Deposition-Methods on Hardened Properties of 3D Printed Concrete
404. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-03)
     Influence of Limestone-Calcined-Clay-Cement on Properties of 3D Printed Concrete for Sustainable Construction
405. Dai Xiaodi, Tao Yaxin, Tittelboom Kim, Schutter Geert (2023-02)
     Rheological and Mechanical Properties of 3D Printable Alkali-Activated Slag Mixtures with Addition of Nano Clay
406. Wang Dianchao, Xiao Jianzhuang, Sun Bochao, Zhang Shipeng et al. (2023-02)
     Mechanical Properties of 3D Printed Mortar Cured by CO2
407. Rehman Atta, Melesse Birru, Kim Jung-Hoon (2023-02)
     Set-on-Demand 3D Concrete Printing Construction and Potential Outcome of Shotcrete-Accelerators on Its Hardened Properties
408. Xu Zhuoyue, Zhang Dawang, Li Hui, Sun Xuemei (2023-02)
     Effects of the Distribution of Solid Particles on the Rheological Properties and Buildability of 3DPM Fresh Pastes with Different FA/GGBFS Content
409. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Das Utpal et al. (2023-02)
     Optimization of Mix Proportion of 3D Printable Mortar Based on Rheological Properties and Material-Strength Using Factorial Design of Experiment
410. Şahin Hatice, Mardani Ali (2023-02)
     Mechanical Properties, Durability Performance and Inter-Layer Adhesion of 3DPC Mixtures:
     A State‐of‐the‐art Review
411. Pang Zhiming, Lu Cong, Li Baoshan, Wang Jiajie (2023-02)
     A Multi-Scale Model for Quantifying Fiber-Orientation Effects on the Tensile Properties of 3D Printed Engineered Cementitious Composites
412. Liu Qiang, Jiang Quan, Zhou Zhenhua, Xin Jie et al. (2023-02)
     The Printable and Hardened Properties of Nano-Calcium Carbonate with Modified Polypropylene-Fibers for Cement-Based 3D Printing
413. Ogura Hiroki, Yamamoto Shinya, Abe Hiroyuki (2023-01)
     Mechanical Properties of Fiber-Reinforced Cementitious Composites Manufactured Using 3D Printing Technology
414. Diniz Hugo, Martinelli Antônio, Cabral Kleber, Ferreira Ruan et al. (2023-01)
     Synergistic Effects of the Use of Metakaolin, Sand and Water on the Properties of Cementitious Composites for 3D Printing
415. Zahabizadeh Behzad, Pereira João, Gonçalves Claúdia, Pereira Eduardo et al. (2022-12)
     Influence of the Printing-Direction and Age on the Mechanical Properties of 3D Printed Concrete:
     Correction
416. Li Zhengrong, Xing Wenjing, Sun Jingting, Feng Xiwen (2022-12)
     Multi-Scale Structural Characteristics and Heat-Moisture Properties of 3D Printed Building Walls:
     A Review
417. Yang Jun-Mo, Park In-Beom, Lee Hojae, Kwon Hongkyu (2022-12)
     Effects of Nozzle Details on Print Quality and Hardened Properties of Underwater 3D Printed Concrete
418. Shen Yuhang, Lin Li, Wei Shengjie, Yan Jie et al. (2022-12)
     Research on the Preparation and Mechanical Properties of Solidified 3D Printed Concrete Materials
419. Tinoco Matheus, Gouvêa Lucas, Cássia Magalhães Martins Karenn, Toledo Filho Romildo et al. (2022-12)
     The Use of Rice Husk Particles to Adjust the Rheological Properties of 3D Printable Cementitious Composites Through Water Sorption
420. Choo Joshua, Mohammed Bashar, Chen Pei-Shan, Abdulkadir Isyaka et al. (2022-12)
     Modeling and Optimizing the Effect of 3D Printed Origami-Bubble-Aggregate on the Mechanical and Deformation Properties of Rubberized ECC
421. İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Ozcelikci Emircan et al. (2022-12)
     Rheological Property and Extrudability Performance-Assessment of Construction and Demolition Waste-Based Geopolymer Mortars with Varied Testing Protocols
422. Srinivas Dodda, Dey Dhrutiman, Panda Biranchi, Sitharam Thallak (2022-12)
     Printability, Thermal and Compressive Strength Properties of Cementitious Materials:
     A Comparative Study with Silica-Fume and Limestone
423. Rubin Ariane, Quintanilha Lucas, Repette Wellington (2022-11)
     Influence of Structuration-Rate, with Hydration-Accelerating Admixture, on the Physical and Mechanical Properties of Concrete for 3D Printing
424. Jiang Jinyang, Zheng Chaolang, Wang Fengjuan, Xu Wenxiang et al. (2022-11)
     Novel 3D Printing Phase-Change-Aggregate-Concrete:
     Mechanical and Thermal Properties Analysis
425. Wang Li, Yang Yu, Hu Yuanyuan, Ma Guowei (2022-11)
     Interfacial Properties of Three-Dimensional-Printed Permanent Formwork with Cast-in-Place Concrete
426. Lv Chun, Shen Hongtao, Liu Jie, Wu Dan et al. (2022-11)
     Properties of 3D Printing Fiber-Reinforced Geopolymers Based on Inter-Layer Bonding and Anisotropy
427. Kan Deyuan, Liu Guifeng, Cao Shuang, Chen Zhengfa et al. (2022-11)
     Mechanical Properties and Pore-Structure of Multi-Walled Carbon-Nano-Tube-Reinforced Reactive Powder-Concrete for Three-Dimensional Printing Manufactured by Material-Extrusion
428. Goracci Guido, Salgado David, Gaitero Juan, Dolado Jorge (2022-11)
     Electrical Conductive Properties of 3D Printed Concrete Composite with Carbon Nanofibers
429. Zhao Yu, Yang Guang, Zhu Lingli, Ding Yahong et al. (2022-10)
     Effects of Rheological Properties and Printing Speed on Molding Accuracy of 3D Printing Basalt-Fiber Cementitious Materials
430. D'Haese Romain, Carpentier Olivier, Dubois Vincent, Chafei Sawsen et al. (2022-10)
     3D Printable Materials Made with Industrial Byproducts:
     Formulation, Fresh and Hardened Properties
431. Liu Qiang, Jiang Quan, Huang Mojia, Xin Jie et al. (2022-10)
     The Fresh and Hardened Properties of 3D Printing Cement-Base Materials with Self-Cleaning Nano-TiO2:
     An Exploratory Study
432. Demiral Nazim, Ozkan Ekinci Mehmet, Şahin Oğuzhan, İlcan Hüseyin et al. (2022-10)
     Mechanical Anisotropy Evaluation and Bonding Properties of 3D Printable Construction and Demolition Waste-Based Geopolymer Mortars
433. Deng Zhicong, Jia Zijian, Zhang Chao, Wang Zhibin et al. (2022-10)
     3D Printing Lightweight Aggregate Concrete Prepared with Shell-Packing-Aggregate Method:
     Printability, Mechanical Properties and Pore-Structure
434. Liu Chao, Chen Yuning, Zhang Zedi, Niu Geng et al. (2022-10)
     Study of the Influence of Sand on Rheological Properties, Bubble Features and Buildability of Fresh Foamed Concrete for 3D Printing
435. Machovec Jan, Štádler Marek, Kamenický Josef, Reiterman Pavel (2022-09)
     Mechanical Properties of Concrete Lintel Produced by 3D Printing
436. Spuriņa Ella, Šinka Māris, Ziemelis Krists, Vanags Andris et al. (2022-09)
     The Effects of Air-Entraining Agent on Fresh and Hardened Properties of 3D Concrete
437. Hass Lauri, Bos Freek, Salet Theo (2022-09)
     Characterizing the Bond Properties of Automatically Placed Helical Reinforcement in 3D Printed Concrete
438. Dulaj Albanela, Salet Theo, Lucas Sandra (2022-09)
     Mechanical Properties and Self-Sensing Ability of Graphene-Mortar Compositions with Different Water-Content for 3D Printing Applications
439. Wang Li, Lin Wenyu, Ma Hui, Li Dexin et al. (2022-09)
     Mechanical and Microstructural Properties of 3D Printed Aluminate-Cement-Based Composite Exposed to Elevated Temperatures
440. Chen Yuning, Zhang Yamei, Xie Yudong, Zhang Zedi et al. (2022-09)
     Unraveling Pore-Structure Alternations in 3D Printed Geopolymer Concrete and Corresponding Impacts on Macro-Properties
441. Kompella Sriram, Monte Francesco, Bassani Andrea, Guanziroli Stefano et al. (2022-09)
     A Comparative Study of Hardened-State Mechanical Properties of 3D Printed and Conventionally Cast Fiber-Reinforced Concrete
442. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2022-09)
     Fresh Properties and Strength Evolution of Slag-Modified Fiber-Reinforced Metakaolin-Based Geopolymer Composite for 3D Concrete Printing Application
443. Marczyk Joanna, Ziejewska Celina, Korniejenko Kinga, Łach Michał et al. (2022-09)
     Properties of 3D Printed Concrete-Geopolymer Hybrids Reinforced with Aramid Roving
444. Pott Ursula, Wolf Christoph, Petryna Yuri, Stephan Dietmar (2022-09)
     Evaluation of the Unconfined Uniaxial Compression-Test to Study the Evolution of Apparent Printable Mortar-Properties During the Early-Age Transition-Regime
445. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud et al. (2022-08)
     Investigation of Fresh Properties of 3D Concrete Printing Containing Nano-Clay in Forms of Suspension and Powder
446. Duan Zhenhua, Li Lei, Yao Qinye, Zou Shuai et al. (2022-08)
     Effect of Metakaolin on the Fresh and Hardened Properties of 3D Printed Cementitious Composite
447. Peng Guanhong (2022-08)
     Digital Fabrication and Mechanical Properties of 3D Printing Concrete
448. Wang Zhibin, Jia Lutao, Deng Zhicong, Zhang Chao et al. (2022-08)
     Bond Behavior Between Steel-Bars and 3D Printed Concrete:
     Effect of Concrete Rheological Property, Steel-Bar Diameter and Paste-Coating
449. Zhou Wen, McGee Wesley, Zhu He, Gökçe H. et al. (2022-08)
     Time-Dependent Fresh Properties Characterization of 3D Printing Engineered Cementitious Composites:
     On the Evaluation of Buildability
450. Boukhelf Fouad, Sebaibi Nassim, Boutouil Mohamed, Yoris-Nobile Adrian et al. (2022-07)
     On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing:
     Long-Term Interactions of Cementitious Materials in the Marine Environment
451. Liu Junli, Setunge Sujeeva, Tran Jonathan (2022-07)
     3D Concrete Printing with Cement-Coated Recycled Crumb Rubber:
     Compressive and Microstructural Properties
452. Nodehi Mehrab, Aguayo Federico, Nodehi Shahab, Gholampour Aliakbar et al. (2022-07)
     Durability Properties of 3D Printed Concrete
453. Wang Li, Li Qiqi, Hu Yuanyuan, Cui Tianlong et al. (2022-07)
     Shrinkage and Cracking Properties of Cellulose-Fiber-Concrete Composites for 3D Printing by Leveraging Internal Curing
454. Liu Xiongfei, Li Qi, Wang Fang, Ma Guowei (2022-07)
     Systematic Approach for Printability Evaluation and Mechanical Property Optimization of Spray-Based 3D Printed Mortar
455. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Sanjayan Jay (2022-07)
     Enhancing the Properties of Foam-Concrete 3D Printing Using Porous Aggregates
456. Diab Zeinab, Do Duc, Rémond Sébastien, Hoxha Dashnor (2022-06)
     Uncertainty Quantification of Concrete Properties at Fresh State and Stability-Analysis of the 3D Printing Process by Stochastic Approach
457. Bong Shin, Nematollahi Behzad, Nerella Venkatesh, Mechtcherine Viktor (2022-06)
     Properties of 3D Printable Ductile Fiber-Reinforced Geopolymer Composite
458. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu, Thiruvenkatamani G. (2022-06)
     Mechanical Properties and Failure-Pattern of 3D Printed Hollow Cylinders and Wall Segments under Uniaxial Loading
459. Marcucci Andrea, Kompella Sriram, Monte Francesco, Levi Marinella et al. (2022-06)
     Early-Age Shear and Tensile Fracture Properties of 3D Printable Cementitious Mortar to Assess Printability Window
460. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Sanjayan Jay (2022-06)
     Fresh and Hardened Properties of 3D Printable Foam-Concrete Containing Porous Aggregates
461. Rusike Rutendo, Sataya Michael, Marsh Alastair, Cavalaro Sergio et al. (2022-06)
     Accelerating Early-Age Properties of Ultra-Low Clinker Cements for Extrusion-Based 3D Printing
462. Mai (née Dressler) Inka, Herding Friedrich, Lowke Dirk (2022-06)
     Evaluating the Effect of Methyl-Cellulose on Hardened State Properties in Selective Cement-Activation
463. Böhler David, Mai (née Dressler) Inka, Freund Niklas, Lachmayer Lukas et al. (2022-06)
     Influence of Material and Process Parameters on Hardened State Properties of Shotcrete 3D Printed Elements
464. Demont Léo, Charrier Malo, Margerit Pierre, Ducoulombier Nicolas et al. (2022-06)
     Flow-Based Pultrusion of Anisotropic Concrete:
     Mechanical Properties at Hardened State
465. Nefs Karsten, Overmeir Anne, Salet Theo, Suiker Akke et al. (2022-06)
     Consistency of Mechanical Properties of 3D Printed Strain-Hardening Cementitious Composites Within One Printing System
466. Yuan Qiang, Xie Zonglin, Yao Hao, Huang Tingjie et al. (2022-06)
     Effect of Polyacrylamide on the Workability and Inter-Layer Interface Properties of 3D Printed Cementitious Materials
467. Jin Yuan, Xu Jiabin, Li Yali, Zhao Zhihui et al. (2022-06)
     Rheological Properties, Shape Stability and Compressive Strength of 3D Printed Colored Cement Composites Modified by Needle-Like Pigment
468. Liu Huawei, Liu Chao, Wu Yiwen, Bai Guoliang et al. (2022-06)
     Hardened Properties of 3D Printed Concrete with Recycled Coarse Aggregate
469. Roussel Nicolas, Buswell Richard, Ducoulombier Nicolas, Ivanova Irina et al. (2022-06)
     Assessing the Fresh Properties of Printable Cement-Based Materials:
     High-Potential Tests for Quality-Control
470. Xu Zhuoyue, Zhang Dawang, Li Hui, Sun Xuemei et al. (2022-05)
     Effect of FA and GGBFS on Compressive Strength, Rheology, and Printing Properties of Cement-Based 3D Printing Material
471. Samad Nur, Abdullah Siti, Ibrahim Mustaffa, Shahidan Shahiron et al. (2022-05)
     Initial Properties of 3D Printing Concrete Using Rice-Husk-Ash as Partial Cement Replacement
472. Moini Mohamadreza, Olek Jan, Zavattieri Pablo, Youngblood Jeffrey (2022-04)
     Early-Age Buildability-Rheological Properties Relationship in Additively Manufactured Cement-Paste Hollow Cylinders
473. Klyuev Sergey, Klyuev Alexander, Fediuk Roman, Ageeva Marina et al. (2022-04)
     Fresh and Mechanical Properties of Low-Cement Mortars for 3D Printing
474. Saruhan Vedat, Keskinateş Muhammer, Felekoğlu Burak (2022-04)
     A Comprehensive Review on Fresh State Rheological Properties of Extrusion-Mortars Designed for 3D Printing Applications
475. Liu Huawei, Liu Chao, Bai Guoliang, Wu Yiwen et al. (2022-04)
     Influence of Pore-Defects on the Hardened Properties of 3D Printed Concrete with Coarse Aggregate
476. Skibicki Szymon, Pułtorak Monika, Kaszyńska Maria, Hoffmann Marcin et al. (2022-04)
     The Effect of Using Recycled PET-Aggregates on Mechanical and Durability Properties of 3D Printed Mortar
477. Huang Xin, Yang Weihao, Song Fangnian, Zou Jiuqun (2022-04)
     Study on the Mechanical Properties of 3D Printing Concrete Layers and the Mechanism of Influence of Printing Parameters
478. Uhlík Adam, Buch Mário, Unčík Stanislav (2022-04)
     Effecting the Rheological Properties of Composites for 3D Printing Technology in Construction
479. Zhou Ji, Hou Guanyu, Liu Xiongfei, Li Qi et al. (2022-04)
     Mechanical Properties of Spray-Based 3D Printed Micro-Cable-Reinforced Concrete
480. Gimenez-Carbo Ester, Torres Raquel, Coll Hugo, Roig-Flores Marta et al. (2022-04)
     Preliminary Study of the Fresh and Hard Properties of UHPC That Is Used to Produce 3D Printed Mortar
481. Liu Xiongfei, Li Qi, Li Jixiang (2022-04)
     Shrinkage and Mechanical Properties Optimization of Spray-Based 3D Printed Concrete by PVA-Fiber
482. Nodehi Mehrab, Ozbakkaloglu Togay, Gholampour Aliakbar (2022-04)
     Effect of Supplementary Cementitious Materials on Properties of 3D Printed Conventional and Alkali-Activated Concrete:
     A Review
483. Bhattacherjee Shantanu, Santhanam Manu (2022-04)
     Investigation on the Effect of Alkali-Free Aluminium Sulfate-Based Accelerator on the Fresh Properties of 3D Printable Concrete
484. Bong Shin, Nematollahi Behzad, Xia Ming, Ghaffar Seyed et al. (2022-04)
     Properties of Additively Manufactured Geopolymer Incorporating Mineral-Wollastonite-Micro-Fibers
485. Mo Yixin, Xing Jianchun, Yue Songlin, Zhang Yamei et al. (2022-04)
     Dynamic Properties of 3D Printed Cement Mortar Based on Split Hopkinson Pressure Bar Testing
486. Teixeira João, Schaefer Cecília, Maia Lino, Rangel Bárbara et al. (2022-03)
     Influence of Supplementary Cementitious Materials on Fresh Properties of 3D Printable Materials
487. Liu Jie, Lv Chun (2022-03)
     Properties of 3D Printed Polymer Fiber-Reinforced Mortars:
     A Review
488. Pan Tinghong, Teng Huaijin, Liao Hengcheng, Jiang Yaqing et al. (2022-03)
     Effect of Shaping Plate Apparatus on Mechanical Properties of 3D Printed Cement-Based Materials:
     Experimental and Numerical Studies
489. Putten Jolien, Volder Melissa, Heede Philip, Deprez Maxim et al. (2022-03)
     Transport Properties of 3D Printed Cementitious Materials with Prolonged Time-Gap Between Successive Layers
490. Zhi Peng, Wu Yuching, Yang Qianfan, Kong Xiangrui et al. (2022-03)
     Effect of Spiral Blade Geometry on 3D Printed Concrete Rheological Properties and Extrudability Using Discrete Event Modeling
491. Yalçınkaya Çağlar (2022-03)
     Influence of Hydroxypropyl Methylcellulose Dosage on the Mechanical Properties of 3D Printable Mortars with and without Fiber-Reinforcement
492. İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Yıldırım Gürkan et al. (2022-03)
     Rheological Properties and Compressive Strength of Construction and Demolition Waste-Based Geopolymer Mortars for 3D Printing
493. Xiao Jianzhuang, Lv Zhenyuan, Duan Zhenhua, Hou Shaodan (2022-03)
     Study on Preparation and Mechanical Properties of 3D Printed Concrete with Different Aggregate-Combinations
494. Cui Hongzhi, Yu Shiheng, Cao Xiangpeng, Yang Haibin (2022-03)
     Evaluation of Printability and Thermal Properties of 3D Printed Concrete Mixed with Phase-Change-Materials
495. Yuan Qiang, Gao Chao, Huang Tingjie, Zuo Shenghao et al. (2022-03)
     Factors Influencing the Properties of Extrusion-Based 3D Printed Alkali-Activated Fly-Ash-Slag Mortar
496. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-03)
     Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials:
     Correction
497. Wang Li, Yang Yu, Yao Liang, Ma Guowei (2022-02)
     Interfacial Bonding Properties of 3D Printed Permanent Formwork with the Post-Casted Concrete
498. Harbouz Ilhame, Rozière Emmanuel, Yahia Ammar, Loukili Ahmed (2022-02)
     Printability-Assessment of Cement-Based Materials Based on Rheology, Hydration Kinetics, and Viscoelastic Properties
499. Ji Guangchao, Xiao Jianzhuang, Zhi Peng, Wu Yuching et al. (2022-02)
     Effects of Extrusion-Parameters on Properties of 3D Printing Concrete with Coarse Aggregates
500. Singh Amardeep, Liu Qiong, Xiao Jianzhuang, Lyu Qifeng (2022-02)
     Mechanical and Macrostructural Properties of 3D Printed Concrete Dosed with Steel-Fibers under Different Loading-Direction
501. Ma Guowei, A Ruhan, Xie Panpan, Pan Zhu et al. (2022-01)
     3D Printable Aerogel-Incorporated Concrete:
     Anisotropy Influence on Physical, Mechanical, and Thermal Insulation Properties
502. Bakar Muhammad, Saude Nasuha, Ibrahim Mustaffa, Ismail Nur (2022-01)
     Additive Manufacturing:
     A Review of Current 3D Concrete Printing on Materials, Methods, Applications, Properties and Challenges
503. Xie Xiangyu, Zhang Lihai, Shi Caijun, Liu Xuemei (2022-01)
     Prediction of Lubrication-Layer Properties of Pumped Concrete Based on Flow-Induced Particle-Migration
504. Hojati Maryam, Li Zhanzhao, Memari Ali, Park Keunhyoung et al. (2022-01)
     3D Printable Quaternary-Cementitious-Materials Towards Sustainable Development:
     Mixture Design and Mechanical Properties
505. Cui Jinyang, He Zhen, Zhang Guozhi, Cai Xinhua (2022-01)
     Rheological Properties of Sprayable Ultra-High-Performance Concrete with Different Viscosity-Enhancing Agents
506. Putten Jolien, Nerella Venkatesh, Mechtcherine Viktor, Hondt Mélody et al. (2022-01)
     Properties and Testing of Printed Cement-Based Materials in Hardened State
507. Wangler Timothy, Flatt Robert, Roussel Nicolas, Perrot Arnaud et al. (2022-01)
     Printable Cement-Based Materials:
     Fresh Properties Measurements and Control
508. Liu Chao, Xiong Yuanliang, Chen Yuning, Jia Lutao et al. (2022-01)
     Effect of Sulphoaluminate Cement on Fresh and Hardened Properties of 3D Printing Foamed Concrete
509. Heever Marchant, Plessis Anton, Kruger Jacques, Zijl Gideon (2022-01)
     Evaluating the Effects of Porosity on the Mechanical Properties of Extrusion-Based 3D Printed Concrete
510. Skibicki Szymon, Jakubowska Patrycja, Kaszyńska Maria, Sibera Daniel et al. (2021-12)
     Early-Age Mechanical Properties of 3D Printed Mortar with Spent Garnet
511. Zhang Ying, Wan Zhiming, Wu Lei (2021-12)
     Study on Mechanical Properties of In-Situ Printed Reinforced Concrete Wall with Core Column
512. Zhou Jiehang, Lai Jianzhong, Du Longyu, Wu Kai et al. (2021-12)
     Effect of Directionally Distributed Steel-Fiber on Static and Dynamic Properties of 3D Printed Cementitious Composite
513. Wu Zixia, Xu Yading, Šavija Branko (2021-12)
     Mechanical Properties of Lightweight Cementitious Cellular Composites Incorporating Micro-Encapsulated Phase-Change-Material
514. Şahin Hatice, Mardani Ali (2021-12)
     Assessment of Materials, Design Parameters and Some Properties of 3D Printing Concrete Mixtures:
     A State of the Art Review
515. Stidwell Samuel, Kreiger Eric (2021-12)
     Determination of Mechanical Properties of Additively Constructed Concrete Based on Specimen-Orientation
516. Yao Hao, Xie Zonglin, Li Zemin, Huang Chuhan et al. (2021-11)
     The Relationship Between the Rheological Behavior and Inter-Layer Bonding Properties of 3D Printing Cementitious Materials with the Addition of Attapulgite
517. Sun Xiaoyan, Zhou Jiawei, Wang Qun, Shi Jiangpeng et al. (2021-11)
     PVA-Fiber-Reinforced High-Strength Cementitious Composite for 3D Printing:
     Mechanical Properties and Durability
518. Ma Lei, Zhang Qing, Jia Zijian, Liu Chao et al. (2021-11)
     Effect of Drying Environment on Mechanical Properties, Internal RH and Pore-Structure of 3D Printed Concrete
519. Napolitano Rosanna, Forni Daniele, Menna Costantino, Asprone Domenico et al. (2021-11)
     Dynamic Characterization of the Layer-Interface Properties of 3D Printed Concrete Elements
520. Pham Luong, Panda Biranchi, Tran Jonathan (2021-11)
     Fresh and Hardened Properties of 3D Printable Polymer-Fiber-Reinforced High-Performance Cementitious Composite
521. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Tittelboom Kim et al. (2021-11)
     Mechanical and Microstructural Properties of 3D Printable Concrete in the Context of the Twin-Pipe Pumping-Strategy
522. Paiva Maria, Duarte Fonseca Rocha Larissa, Fernandez Letízia, Toledo Filho Romildo et al. (2021-11)
     Rheological Properties of Metakaolin-Based Geopolymers for Three-Dimensional Printing of Structures
523. Tao Yaxin, Vantyghem Gieljan, Lesage Karel, Yuan Yong et al. (2021-11)
     Adhesion Properties of Printable Polymer-Modified Concrete for Rock Tunnel Linings
524. Liu Yu, Jing Rui, Cao Fengze, Yan Peiyu (2021-11)
     Effects of Aggregate Content on Rheological Properties of Lubrication-Layer and Pumping Concrete
525. Rodriguez Fabian, Olek Jan, Moini Mohamadreza, Zavattieri Pablo et al. (2021-11)
     Linking Solids Content and Flow Properties of Mortars to Their Three-Dimensional Printing Characteristics
526. Sonebi Mohammed, Dedenis Marie, Abdalqader Ahmed, Perrot Arnaud (2021-11)
     Effect of Red Mud, Nano-Clay, and Natural Fiber on Fresh and Rheological Properties of Three-Dimensional Concrete Printing
527. Lee Hojae, Seo Eun-A, Kim Won-Woo, Moon Jae-Heum (2021-10)
     Experimental Study on Time-Dependent Changes in Rheological Properties and Flow-Rate of 3D Concrete Printing Materials
528. Hou Shaodan, Xiao Jianzhuang, Duan Zhenhua, Ma Guowei (2021-10)
     Fresh Properties of 3D Printed Mortar with Recycled Powder
529. Woo Seong-Jin, Yang Jun-Mo, Lee Hojae, Kwon Hongkyu (2021-10)
     Comparison of Properties of 3D Printed Mortar in Air vs. Underwater
530. Ge Zhi, Tawfek Abdullah, Zhang Hongzhi, Yang Yongwei et al. (2021-09)
     Influence of an Extrusion-Approach on the Fiber-Orientation and Mechanical Properties of Engineering Cementitious Composite
531. Mo Yixin, Yue Songlin, Zhou Qizhen, Feng Bowei et al. (2021-09)
     Dynamic Properties and Fractal Characteristics of 3D Printed Cement Mortar in SHPB-Test
532. Xu Yanqun, Yuan Qiang, Li Zemin, Shi Caijun et al. (2021-09)
     Correlation of Inter-Layer Properties and Rheological Behaviors of 3DPC with Various Printing Time Intervals
533. Kompella Sriram, Marcucci Andrea, Monte Francesco, Bassani Andrea et al. (2021-09)
     A Study of Early-Age Shear Properties of 3D Printable Cementitious Mixes with Fiber-Reinforcements
534. Som Debadri, Zanotti Cristina (2021-09)
     Effect of Nano-Additives and Polymeric Viscosity-Modifying-Admixtures (VMA) on the Fresh and Hardened Properties of 3D Printable Concrete Mixtures
535. Wi Kwangwoo, Wang Kejin, Taylor Peter, Laflamme Simon et al. (2021-09)
     Properties and Microstructure of Extrusion-Based 3D Printing Mortar Containing a Highly Flowable, Rapid Set Grout
536. Liu Chenkang, Yue Songlin, Zhou Cong, Sun Honglei et al. (2021-08)
     Anisotropic Mechanical Properties of Extrusion-Based 3D Printed Layered Concrete
537. Choi Se-Jin, Kim Ji-Hwan, Jeong Hyojin, Lee Ja-Sung et al. (2021-08)
     Simulated and Experimental Investigation of the Mechanical Properties and Solubility of 3D Printed Capsules for Self-Healing Cement Composites
538. Liu Chao, Wang Xianggang, Chen Yuning, Zhang Chao et al. (2021-06)
     Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Stability, Rheological Properties, and Printability of 3D Printing Foam-Concrete
539. Shen Wenkai, Shi Caijun, Khayat Kamal, Yuan Qiang et al. (2021-06)
     Change in Fresh Properties of High-Strength Concrete Due to Pumping
540. Caron Jean-François, Demont Léo, Ducoulombier Nicolas, Mesnil Romain (2021-06)
     3D Printing of Mortar with Continuous Fibers:
     Principle, Properties and Potential for Application
541. Sambucci Matteo, Valente Marco (2021-06)
     Influence of Waste-Tire-Rubber-Particles-Size on the Microstructural, Mechanical, and Acoustic Insulation Properties of 3D Printable Cement Mortars
542. Song Hongwei, Li Xinle (2021-05)
     An Overview on the Rheology, Mechanical Properties, Durability, 3D Printing, and Microstructural Performance of Nanomaterials in Cementitious Composites
543. Liu Miao, Huang Yimiao, Wang Fang, Sun Junbo et al. (2021-05)
     Tensile and Flexural Properties of 3D Printed Jackets-Reinforced Mortar
544. Jenkins Morgan, Brand Alexander (2021-05)
     Aggregate Moisture-Content and Fresh Property-Control-Measures in Cementitious Mortars
545. Cuevas Villalobos Karla, Chougan Mehdi, Martin Falk, Ghaffar Seyed et al. (2021-05)
     3D Printable Lightweight Cementitious Composites with Incorporated Waste-Glass-Aggregates and Expanded Microspheres:
     Rheological, Thermal and Mechanical Properties
546. Zhang Hao, Zhu Liming, Zhang Fan, Yang Mijia (2021-04)
     Effect of Fiber Content and Alignment on the Mechanical Properties of 3D Printing Cementitious Composites
547. Zhu Binrong, Pan Jinlong, Zhou Zhenxin, Cai Jingming (2021-04)
     Mechanical Properties of Engineered Cementitious Composites Beams Fabricated by Extrusion-Based 3D
548. Ding Tao, Xiao Jianzhuang, Zou Shuai, Yu Jiangtao (2021-03)
     Flexural Properties of 3D Printed Fiber-Reinforced Concrete with Recycled Sand
549. Zahabizadeh Behzad, Pereira João, Gonçalves Claúdia, Pereira Eduardo et al. (2021-03)
     Influence of the Printing-Direction and Age on the Mechanical Properties of 3D Printed Concrete
550. Zhao Zhihui, Chen Mingxu, Xu Jiabin, Li Laibo et al. (2021-03)
     Mix-Design and Rheological Properties of Magnesium-Potassium-Phosphate Cement Composites Based on the 3D Printing-Extrusion-System
551. Yu Kequan, McGee Wesley, Ng Tsz, Zhu He et al. (2021-02)
     3D Printable Engineered Cementitious Composites:
     Fresh and Hardened Properties
552. Sikora Paweł, Chung Sang-Yeop, Liard Maxime, Lootens Didier et al. (2021-02)
     The Effects of Nano-Silica on the Fresh and Hardened Properties of 3D Printable Mortars
553. Ye Junhong, Cui Can, Yu Jiangtao, Yu Kequan et al. (2021-02)
     Effect of Polyethylene-Fiber Content on Workability and Mechanical-Anisotropic Properties of 3D Printed Ultra-High-Ductile Concrete
554. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2021-02)
     Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials
555. Chougan Mehdi, Ghaffar Seyed, Sikora Paweł, Chung Sang-Yeop et al. (2021-02)
     Investigation of Additive Incorporation on Rheological, Microstructural and Mechanical Properties of 3D Printable Alkali-Activated Materials
556. Meurer Maximilian, Claßen Martin (2021-02)
     Mechanical Properties of Hardened 3D Printed Concretes and Mortars:
     Development of a Consistent Experimental Characterization-Strategy
557. Ye Junhong, Cui Can, Yu Jiangtao, Yu Kequan et al. (2021-01)
     Fresh and Anisotropic-Mechanical Properties of 3D Printable Ultra-High-Ductile Concrete with Crumb-Rubber
558. Wang Brydon, Rimmer Matthew (2021-01)
     3D Printing and Housing:
     Intellectual Property and Construction Law
559. Jacquet Yohan, Picandet Vincent, Rangeard Damien, Perrot Arnaud (2020-12)
     Gravity-Induced Flow to Characterize Rheological Properties of Printable Cement-Based Materials
560. Joh Changbin, Lee Jungwoo, Bui The, Park Jihun et al. (2020-11)
     Buildability and Mechanical Properties of 3D Printed Concrete
561. Alchaar Aktham, Tamimi Adil (2020-10)
     Mechanical Properties of 3D Printed Concrete in Hot Temperatures
562. Guo Xiaolu, Yang Junyi, Xiong Guiyan (2020-09)
     Influence of Supplementary Cementitious Materials on Rheological Properties of 3D Printed Fly-Ash-Based Geopolymer
563. Geng Zifan, She Wei, Zuo Wenqiang, Lyu Kai et al. (2020-09)
     Layer-Interface Properties in 3D Printed Concrete:
     Dual Hierarchical Structure and Micromechanical Characterization
564. Marchment Taylor, Sanjayan Jay (2020-09)
     Bond Properties of Reinforcing Bar Penetrations in 3D Concrete Printing
565. Xiao Jianzhuang, Zou Shuai, Yu Ying, Wang Yu et al. (2020-09)
     3D Recycled Mortar Printing:
     System-Development, Process-Design, Material-Properties and On-Site-Printing
566. Li Zhanzhao, Hojati Maryam, Wu Zhengyu, Piasente Jonathon et al. (2020-07)
     Fresh and Hardened Properties of Extrusion-Based 3D Printed Cementitious Materials:
     A Review
567. Mai (née Dressler) Inka, Freund Niklas, Lowke Dirk (2020-07)
     Control of Strand Properties Produced with Shotcrete 3D Printing by Accelerator Dosage and Process Parameters
568. Bong Shin, Nematollahi Behzad, Arunothayan Arun, Xia Ming et al. (2020-07)
     Effect of Wollastonite Micro-Fiber Addition on Properties of 3D Printable ‘Just-Add-Water’ Geopolymers
569. Freund Niklas, Mai (née Dressler) Inka, Lowke Dirk (2020-07)
     Studying the Bond Properties of Vertical Integrated Short Reinforcement in the Shotcrete 3D Printing Process
570. Suntharalingam Thadshajini, Nagaratnam Brabha, Poologanathan Keerthan, Hackney Phil et al. (2020-07)
     Effect of Polypropylene-Fibers on the Mechanical Properties of Extrudable Cementitious Material
571. Dedenis Marie, Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud et al. (2020-07)
     Effect of Metakaolin, Fly-Ash and Polypropylene-Fibers on Fresh and Rheological Properties of 3D Printing Based Cement Materials
572. Jacquet Yohan, Picandet Vincent, Rangeard Damien, Perrot Arnaud (2020-07)
     Gravity-Driven Tests to Assess Mechanical Properties of Printable Cement-Based Materials at Fresh State
573. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2020-07)
     Effect of Limestone-Powder Substitution on Fresh and Hardened Properties of 3D Printable Mortar
574. Hirsch Tamino, Dorn Tobias, Ehm Clemens, Stephan Dietmar (2020-07)
     Comparison of Printable Inorganic Binders:
     Key Properties for 3D Printable Materials
575. Skibicki Szymon, Kaszyńska Maria, Wahib Nawid, Techman Mateusz et al. (2020-07)
     Properties of Composite Modified with Limestone-Powder for 3D Concrete Printing
576. Hassan Hilal, Najjar Fady, Jassmi Hamad, Ahmed Waleed (2020-07)
     Fresh and Hardened Properties of 3D Printed Concrete Made with Dune Sand
577. Chen Yu, Rodríguez Claudia, Li Zhenming, Chen Boyu et al. (2020-07)
     Effect of Different Grade Levels of Calcined Clays on Fresh and Hardened Properties of Ternary-Blended Cementitious Materials for 3D Printing
578. Ding Tao, Xiao Jianzhuang, Zou Shuai, Wang Yu (2020-06)
     Hardened Properties of Layered 3D Printed Concrete with Recycled Sand
579. Manikandan Karthick, Jiang Xuepeng, Singh Amit, Li Beiwen et al. (2020-06)
     Effects of Nozzle Geometries on 3D Printing of Clay Constructs:
     Quantifying Contour-Deviation and Mechanical Properties
580. Muthukrishnan Shravan, Kua Harn, Yu Ling, Chung Jacky (2020-05)
     Fresh Properties of Cementitious Materials Containing Rice-Husk-Ash for Construction 3D Printing
581. Falliano Devid, Domenico Dario, Ricciardi Giuseppe, Gugliandolo Ernesto (2020-04)
     3D Printable Lightweight Foamed Concrete and Comparison with Classical Foamed Concrete in Terms of Fresh State Properties and Mechanical Strength
582. Özalp Fatih, Yılmaz Halit (2020-03)
     Fresh and Hardened Properties of 3D High-Strength Printing Concrete and Its Recent Applications
583. Sun Xiaoyan, Wang Qun, Wang Hailong, Chen Long (2020-03)
     Influence of Multi-Walled Nanotubes on the Fresh and Hardened Properties of a 3D Printing PVA Mortar Ink
584. Casagrande Lorenzo, Esposito Laura, Menna Costantino, Asprone Domenico et al. (2020-02)
     Effect of Testing Procedures on Buildability Properties of 3D Printable Concrete
585. Verian Kho, Kowaleski Scott, Carli Matthew, Bright Randall et al. (2020-02)
     Properties of 3D Printing Mortar with the Development of a 3D Construction Printing Delivery System
586. Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2020-01)
     Investigation of the Properties of Alkali-Activated Slag Mixes Involving the Use of Nano-Clay and Nucleation-Seeds for 3D Printing
587. Mai (née Dressler) Inka, Freund Niklas, Lowke Dirk (2020-01)
     The Effect of Accelerator Dosage on Fresh Concrete Properties and on Inter-Layer Strength in Shotcrete 3D Printing
588. Ma Guowei, Li Yanfeng, Wang Li, Zhang Junfei et al. (2020-01)
     Real-Time Quantification of Fresh and Hardened Mechanical Property for 3D Printing Material by Intellectualization with Piezoelectric Transducers
589. Lee Hojae, Kim Jang-Ho, Moon Jae-Heum, Kim Won-Woo et al. (2019-12)
     Evaluation of the Mechanical Properties of a 3D Printed Mortar
590. Pham Luong, Lin Xiaoshan, Gravina R., Tran Jonathan (2019-12)
     Influence of PVA- and PP-Fibers at Different Volume Fractions on Mechanical Properties of 3D Printed Concrete
591. Korniejenko Kinga, Łach Michał, Chou S., Lin Wei-Ting et al. (2019-11)
     A Comparative Study of Mechanical Properties of Fly-Ash-Based Geopolymer Made by Casted and 3D Printing Methods
592. Bong Shin, Nematollahi Behzad, Xia Ming, Nazari Ali et al. (2019-09)
     Properties of 3D Printable Ductile Fiber-Reinforced Geopolymer Composite for Digital Construction Applications
593. Arunothayan Arun, Nematollahi Behzad, Bong Shin, Ranade Ravi et al. (2019-09)
     Hardened Properties of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction Applications
594. Peng Yiming, Ma Kunlin, Long Guangcheng, Xie Youjun (2019-08)
     Influence of Nano-SiO2, Nano-CaCO3 and Nano-Al2O3 on Rheological Properties of Cement-Fly-Ash-Paste
595. Yeon Kyu-Seok, Kim Kwan, Yeon Jaeheum, Lee Hee (2019-07)
     Fresh Properties of EVA-Modified Cementitious Mixtures for Use in Additive Construction by Extrusion
596. Panda Biranchi, Mohamed Nisar, Paul Suvash, Bhagath Singh Gangapatnam et al. (2019-07)
     The Effect of Material Fresh Properties and Process Parameters on Buildability and Inter-Layer Adhesion of 3D Printed Concrete
597. Xu Yading, Šavija Branko (2019-06)
     Development of Strain-Hardening Cementitious Composite (SHCC) Reinforced with 3D Printed Polymeric Reinforcement:
     Mechanical Properties
598. Jie G., Jie B., Hongxue J. (2019-05)
     Experimental Study on Layer Bonding Property of 3D Printing Building Materials
599. Ting Guan, Tay Yi, Qian Ye, Tan Ming (2019-03)
     Utilization of Recycled Glass for 3D Concrete Printing:
     Rheological and Mechanical Properties
600. Wolfs Robert, Bos Freek, Salet Theo (2019-03)
     Hardened Properties of 3D Printed Concrete:
     The Influence of Process Parameters on Inter-Layer Adhesion
601. Cao Xiangpeng, Li Zongjin (2019-02)
     Factors Influencing the Mechanical Properties of Three-Dimensional Printed Products From Magnesium-Potassium-Phosphate Cement Material
602. Feng Peng, Meng Xinmiao, Chen Jian-Fei, Ye Lieping (2019-02)
     Mechanical Properties of Structures 3D Printed with Cementitious Powders
603. Hambach Manuel, Rutzen Matthias, Volkmer Dirk (2019-02)
     Properties of 3D-Printed Fiber-Reinforced Portland Cement-Paste
604. Nematollahi Behzad, Xia Ming, Vijay Praful, Sanjayan Jay (2019-02)
     Properties of Extrusion-Based 3D Printable Geopolymers for Digital Construction Applications
605. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-02)
     Properties of Powder-Based 3D Printed Geopolymers
606. Jeong Hoseong, Han Sun-Jin, Choi Seung-Ho, Lee Yoon et al. (2019-02)
     Rheological Property Criteria for Buildable 3D Printing Concrete
607. Panda Biranchi, Lim Jian, Tan Ming (2019-02)
     Mechanical Properties and Deformation Behavior of Early-Age Concrete in the Context of Digital Construction
608. Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
     Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing
609. Alghamdi Hussam, Nair Sooraj, Neithalath Narayanan (2019-02)
     Insights into Material-Design, Extrusion Rheology, and Properties of 3D Printable Alkali-Activated Fly-Ash-Based Binders
610. Zhang Yu, Zhang Yunsheng, She Wei, Yang Lin et al. (2019-01)
     Rheological and Hardened Properties of the High-Thixotropy 3D Printing Concrete
611. Liu Zhixin, Li Mingyang, Weng Yiwei, Wong Teck et al. (2018-12)
     Mixture-Design-Approach to Optimize the Rheological Properties of the Material Used in 3D Cementitious Material-Printing
612. Chen Mingxu, Guo Xiangyang, Zheng Yan, Li Laibo et al. (2018-11)
     Effect of Tartaric Acid on the Printable, Rheological and Mechanical Properties of 3D Printing Sulphoaluminate Cement-Paste
613. Nematollahi Behzad, Vijay Praful, Sanjayan Jay, Nazari Ali et al. (2018-11)
     Effect of Polypropylene Fiber Addition on Properties of Geopolymers Made by 3D Printing for Digital Construction
614. Schutter Geert, Lesage Karel (2018-09)
     Active Control of Properties of Concrete:
     A (P)Review
615. Weng Yiwei, Lu Bing, Li Mingyang, Liu Zhixin et al. (2018-09)
     Empirical Models to Predict Rheological Properties of Fiber-Reinforced Cementitious Composites for 3D Printing
616. Chen Mingxu, Li Laibo, Zheng Yan, Zhao Piqi et al. (2018-09)
     Rheological and Mechanical Properties of Admixtures-Modified 3D Printing Sulphoaluminate Cementitious Materials
617. Bong Shin, Nematollahi Behzad, Nazari Ali, Xia Ming et al. (2018-09)
     Fresh and Hardened Properties of 3D Printable Geopolymer Cured in Ambient Temperature
618. Ma Siwei, Kawashima Shiho (2018-09)
     Rheological and Water Transport Properties of Cement-Pastes Modified with Diutan Gum and Attapulgite-Palygorskite-Nano-Clay for 3D Concrete Printing
619. Nematollahi Behzad, Xia Ming, Bong Shin, Sanjayan Jay (2018-09)
     Hardened Properties of 3D Printable One-Part Geopolymer for Construction Applications
620. Ma Guowei, Sun Junbo, Wang Li, Aslani Farhad et al. (2018-09)
     Electromagnetic and Microwave-Absorbing Properties of Cementitious Composite for 3D Printing Containing Waste Copper Solids
621. Hu Chang’an, Du Wenbo (2018-08)
     Research on the Method for Improving Mechanical Properties of Sand-Mold-Based on 3D Printing Process
622. Hillegas James, Liu Rui, Liu Bosheng, Sanchez Alex et al. (2018-07)
     Engineering Properties Influencing Clayey Materials for Additive Manufacturing
623. Al-Qutaifi Sarah, Nazari Ali, Bagheri Ali (2018-07)
     Mechanical Properties of Layered Geopolymer Structures Applicable in Concrete 3D Printing
624. Mechtcherine Viktor, Grafe Jasmin, Nerella Venkatesh, Spaniol Erik et al. (2018-05)
     3D Printed Steel-Reinforcement for Digital Concrete Construction:
     Manufacture, Mechanical Properties and Bond Behavior
625. Liu Zhixin, Li Mingyang, Wong Teck, Tan Ming (2018-05)
     Measurement of the Fresh Rheological Properties of Material in 3D Printing
626. Annapareddy Ashokreddy, Panda Biranchi, Ting Guan, Li Mingyang et al. (2018-05)
     Flow And Mechanical Properties of 3D Printed Cementitious Material With Recycled Glass-Aggregates
627. Paul Suvash, Zijl Gideon, Tan Ming, Gibson Ian (2018-05)
     A Review of 3D Concrete Printing Systems and Materials Properties:
     Current Status and Future Research Prospects
628. Zhang Yu, Zhang Yunsheng, Liu Guojian, Yang Yonggan et al. (2018-04)
     Fresh Properties of a Novel 3D Printing Concrete Ink
629. Panda Biranchi, Mohamed Nisar, Tan Ming (2018-04)
     Effect of 3D Printing on Mechanical Properties of Fly Ash-Based Inorganic Geopolymer
630. Secrieru Egor, Cotardo Dario, Mechtcherine Viktor, Lohaus Ludger et al. (2018-04)
     Changes in Concrete Properties During Pumping and Formation of Lubricating Material Under Pressure
631. Panda Biranchi, Tan Ming (2018-03)
     Experimental Study on Mix Proportion and Fresh Properties of Fly-Ash-Based Geopolymer for 3D Concrete Printing
632. Nam Young, Hwang Young, Park Ji, Lim Yun (2018-02)
     Feasibility Study to Control Fiber-Distribution for Enhancement of Composite Properties via Three-Dimensional Printing
633. Ma Guowei, Li Zhijian, Wang Li (2017-12)
     Printable Properties of Cementitious Material Containing Copper-Tailings for Extrusion-Based 3D Printing
634. Paul Suvash, Tay Yi, Panda Biranchi, Tan Ming (2017-08)
     Fresh and Hardened Properties of 3D Printable Cementitious Materials for Building and Construction
635. Marchment Taylor, Xia Ming, Dodd Elise, Sanjayan Jay et al. (2017-07)
     Effect of Delay-Time on the Mechanical Properties of Extrusion-Based 3D Printed Concrete
636. Kashani Alireza, Ngo Tuan (2017-07)
     Optimization of Mixture-Properties for 3D Printing of Geopolymer Concrete
637. Shakor Pshtiwan, Sanjayan Jay, Nazari Ali, Nejadi Shami (2017-02)
     Modified 3D Printed Powder to Cement-Based Material and Mechanical Properties of Cement Scaffold Used in 3D Printing
638. Hambach Manuel, Volkmer Dirk (2017-02)
     Properties of 3D Printed Fiber-Reinforced Portland-Cement-Paste
639. Choi Myoungsung, Park Kyoungsoo, Oh Taekeun (2016-06)
     Viscoelastic Properties of Fresh Cement-Paste to Study the Flow Behavior
640. Feng Peng, Meng Xinmiao, Chen Jian-Fei, Ye Lieping (2015-06)
     Mechanical Properties of Structures 3D Printed with Cementitious Powders
641. Choi Myoungsung, Roussel Nicolas, Kim Youngjin, Kim Jinkeun (2013-01)
     Lubrication-Layer Properties During Concrete Pumping
642. Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
     Mix-Design and Fresh Properties for High-Performance Printing Concrete
643. Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
     Hardened Properties of High-Performance Printing Concrete
644. Takashima Hiroyuki, Miyagai Kiyotaka, Hashida Toshiyuki, Li Victor (2002-09)
     A Design Approach for the Mechanical Properties of Polypropylene-Discontinuous-Fiber-Reinforced Cementitious Composites by Extrusion-Molding