#mechanics¶

Keywords by Co - Occurrence¶

#print (328) #property (256) #concrete (238) #cement (108) #fiber (88)

1. Lin Yilin, Zeng Tao, Wang Yuting, Li Dehui et al. (2026-01)
   Printable and Mechanical Properties of 3D-Printed Nano-Silica Modified Concretes
2. Talukdar A., Belek Fialho Teixeira Müge, Fawzia Sabrina, Zahra Tatheer et al. (2026-01)
   Investigation on the Fresh and Mechanical Properties of Low Carbon 3D Printed Concrete Incorporating Sugarcane Bagasse Ash and Microfibers
3. Aroso Francisca, Reis Rui, Brandão Filipe, Figueiredo Bruno et al. (2026-01)
   Assessing Orthotropic Mechanical Performance and Digital Twin of Robotic 3D Printed Cementitious Mortars with Fibers and Metal Reinforcements
4. Cárdenas Valeria, Parmigiani Silvia, Vargas Juan, Restuccia Luciana et al. (2026-01)
   Incorporation of Vitrified Ashes in Lightweight Foamed Concrete for 3D Printing:
   Thermal and Mechanical Assessment
5. Zhang Xiaoyue, Chen Zhengren, Zhou Xinting, Li Zheng et al. (2026-01)
   Experimental Investigation on the Mechanical Performance of 3D-Printed Concrete-Glued Laminated Timber Composite Beams
6. Zhu Binrong, Qi Miao, Chen Wei, Pan Jinlong (2025-12)
   Anisotropic Mechanical Properties of 3D Printed Low-Carbon Concrete and Connection Strategies for Large-Scale Reusable Formwork in Digital Construction
7. Murali Gunasekaran, Kravchenko Ekaterina, Yuvaraj Divya, Avudaiappan Siva (2025-12)
   Next-Generation Green Construction:
   3D-Printed Geopolymer Concrete with Optimized Rheology, Mechanical Performance, and Environmental Efficiency
8. Huang Bo, Liu Chang, Sun Junbo, Wang Yufei et al. (2025-12)
   Optimized Synergy of Fiberglass Mesh and PP Fibers-Modified Structural Adhesive for Enhanced Mechanical and Microstructural Performance in 3D Printing Concrete
9. Cui Xiaoshuang, Pu Xianghao, Zhang Dongyang, Li Weihong et al. (2025-12)
   Study on the Mechanical Properties of 3D-Printed Continuous Jute Yarn-Reinforced Concrete
10. Eisazadeh Hamid, Chatroudi Narges, Alizadeh Roozbeh (2025-12)
    AI-Based Prediction and Numerical Analysis of Mechanical and Microstructural Parameters of Carbon Fiber Reinforced 3D Printed Composites
11. Liu Mei, Wang Huai, Li Yang, Li Xiulin et al. (2025-12)
    Post-Fire Mechanical Properties of 3D Printed Concrete Under Different Cooling Methods
12. Akgümüş Fatih, Şahin Hatice, İsafça Kaya Tuğçe, Mardani Ali (2025-12)
    Combined Effect of Recycled Tire Steel Fiber and Blast Furnace Slag on the Mechanical Performance of 3D Printable Concrete
13. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun et al. (2025-12)
    Effect of Aggregate-to-Binder Ratio on 3D Printed Concrete:
    Printability, Mechanics, and Shrinkage
14. Slavcheva Galina, Levchenko Artem, Artamonova Olga, Karakchi-Ogli Davut et al. (2025-12)
    Mechanical Behavior and Reinforcement Efficiency of 3D Printed Concrete Under Compression, Tension, and Bending
15. Xiao Wei (2025-12)
    Research on the Mechanical and Durability Properties of Carbon Fiber Reinforced 3D Printed Concrete
16. Taborda-Llano Isabella, Hoyos-Montilla Ary, Asensio Eloy, Guerrero Ana et al. (2025-12)
    Influence of the Construction Process Parameters on the Mechanical Performance and Durability of 3D Printed Concrete:
    A Systematic Review
17. Cao Jing, Yang Xiaojie, Shi Yaming, Yang Yi et al. (2025-12)
    Numerical Analysis of Mechanical Properties of Steel Fiber Composite Cement Mortar Considering Non-Uniformity in 3D Printing.
18. Tong Zhongling, Guan Qingtao, Elabbasy Ahmed, Ateah Ali et al. (2025-12)
    Empowering 3D Printed Concrete:
    Discovering the Impact of Steel Fiber Reinforcement on Mechanical Performance
19. Cheng Jianhua, Chen Meng, Ge Yulin, Zhang Tong (2025-12)
    Mechanical Behavior and Damage Evolution of 3D-Printed Engineered Cementitious Composites at Elevated Temperatures:
    Insights from Acoustic Emission Characterization
20. Cheng Zhangqi, Li Keyan, Liu Renlong (2025-12)
    Sustainable 3D Printed Engineered Cementitious Composites Incorporating Recycled Ceramic Materials:
    Rheology and Mechanical Behavior
21. Ramezani Mahyar, Kilic Ugur, Sherif Muhammad, Arce Gabriel et al. (2025-12)
    Rheological Properties and Mechanical Response of Bio-Based Graphene Enhanced Additively Manufactured Cementitious Composites
22. Si Wen, Khan Mehran, McNally Ciaran (2025-11)
    Rheological Optimization and Mechanical Performance Assessment of High-Volume GGBS-Silica Fume Mortars for 3D Printing
23. Saravanan Pradeep, Ramaswamy Ananth (2025-11)
    Modelling Buildability Performance of 3D Printable Cementitious Materials Using Chemo-Mechanical Model
24. Sikora Paweł, Federowicz Karol, Skibicki Szymon, Techman Mateusz et al. (2025-11)
    Demonstration of 3D-Printed Concrete Containing Fine Recycled Concrete Aggregates and Recycled Concrete Powder:
    Rheology, Early-Age, Shrinkage, Mechanical, and Durability Performance.
25. Meier Niklas, Herding Friedrich, Zetzener Harald, Mai (née Dressler) Inka et al. (2025-11)
    Surface Modification of Bulk Material for Particle Bed 3D Concrete Printing:
    Effect on Wettability, Porosity, and Mechanical Properties
26. Davar Saeed, Ma Zhanguo (2025-11)
    Improving the Mechanical Performance of 3D-Printed UHPFRC with Thermally Modified Carbon Fibers
27. Raza Ali, Tan Binglin, Jiajia Zhou, Umar Muhammad et al. (2025-11)
    Evaluation of Mechanical and Microstructural Properties of Sustainable 3D-Printed Engineered Cementitious Composites Incorporating Hybrid PE/PVA Fibers and Yellow River Sand
28. Li Jiannan, Singh Amardeep, Zhao Yasong, Sun Jingting et al. (2025-11)
    Enhancing Thermo-Mechanical and Moisture Properties of 3D-Printed Concrete Through Recycled Ultra-Fine Waste Glass Powder:
    Corrigendum
29. Liu Xianda, Sun Junbo, Chen Hui, Liu Chang et al. (2025-11)
    3D Printed Concrete with Red Mud Incorporation:
    Influence of Red Mud Manufacturing Procedures on Mechanical Properties at Elevated Temperatures
30. Oh Sangwoo, Lee Jinsuk, Oh Gyujong, Choi Seongcheol (2025-11)
    Effects of the Combined Incorporation of Superabsorbent Polymers and Polyvinyl Alcohol Fibers on Material Properties of 3D Printable Mortar:
    Rheology, Shrinkage, and Mechanical Behavior
31. Hasan Md, Xu Jie, Uddin Md (2025-11)
    A Critical Review of 3D Printed Fiber-Based Geopolymer Concrete:
    Fresh Properties, Mechanical Performance, and Current Limitations
32. Zhang Jiao-Long, Yuan Yong, Fatoyinbo Imoleayo, Zhou Lujie et al. (2025-11)
    3D-Printable Mortars Incorporating Municipal Solid Waste Incineration Bottom Ash:
    Linking Hydration to Extrudability and Mechanical Performance
33. Song Qiang, Zhou Guangyu, Bao Hailing, Liu Qiong (2025-11)
    Study on the Effects of Nozzle Proximal Carbonation Mixing and Vacuum Dewatering on the Printability and Mechanical Properties of the 3D Printed Construction Mortar
34. Zhu Xiaowei, Zhang Xudong, Zhang Jicheng, Chen Miao et al. (2025-11)
    Study on Anisotropic Thermal and Mechanical Properties of 3D-Printed Scrap-Aerogel-Incorporated Concrete
35. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun et al. (2025-11)
    Examining the Multi-Scale Toughening Mechanisms and Mechanical Anisotropic Behavior of 3D Printed Concrete Reinforced with Calcium Sulfate Whiskers and Mixed Fibers
36. Flor Juncal Luis, Scott Allan, Clucas Don, Loporcaro Giuseppe (2025-11)
    Influence of Alternative Supplementary Cementitious Materials and Printing Parameters on the Mechanical Properties of 3D-Printed Mortars
37. Chen Wenguang, Yu Jie, Ye Junhong, Yu Jiangtao et al. (2025-11)
    3D Printed High-Performance Fiber-Reinforced Cementitious Composites:
    Fresh, Mechanical, and Microstructural Properties
38. Sakolaree Natthanicha, Taweesint Jutamas, Sungsiri Krisana, Assawamankongcharoen Sirikamol et al. (2025-11)
    Evaluation of Fresh and Mechanical Properties and Shrinkage of Hydrophobic Mortar Containing Microfiber for 3D Printing Technology
39. Li Yeou-Fong, Lin Chih-Chieh, Syu Jin-Yuan, Huang Chih-Hong et al. (2025-10)
    Enhancing 3D-Printed Cement Mortar with Recycled PCB Glass Fibers:
    Printability, Mechanical Strength, and FEM-Based Structural Assessment
40. Gao Shan, Li Tianyu, Yuan Jian, Nishiwaki Tomoya et al. (2025-10)
    Mechanical Properties of 3D-Printed Molybdenum Tailings Mortar
41. Ngo Than, Li Shuai, Huynh Tien, Zhang Y. et al. (2025-10)
    3D Printable Hemp Concrete:
    Rheological, Mechanical, and Microstructural Properties
42. Marco Giancarlo, Lombardi Davide (2025-10)
    A Streamlined Decentralised Workflow for Obtaining Specific Mechanical Performance and Grade of 3DPC:
    Towards the Standardisation and Industrialisation of 3DCP
43. Wang Yuting, Chen Meng, Zhang Tong, Zhang Mingzhong (2025-10)
    Influence of Limestone Calcined Clay on the Mechanical Behaviour of 3D Printed Engineered Cementitious Composites
44. Wang Huai, Li Xiulin, Gong Hao, Xu Jingjie et al. (2025-10)
    Thermal and Mechanical Properties of 3D-Printed Fiber-Reinforced Lightweight Concrete Based on Air Entrainment and Hollow Glass Microspheres
45. Ma Wei, Chen Junjie, Dai Yuntong, Zhou Yaya et al. (2025-10)
    Mechanical Properties of 3D Printed Concrete Irregular Structural Formwork:
    Experimental Study and Finite Element Analysis
46. Ali Muhammad, Qian Hui, Umar Muhammad, Fenglin Liu et al. (2025-10)
    Rheological, Mechanical, and Self-Recovery Performance of 3D-Printed ECC Reinforced with Shape Memory Alloy Fibers
47. Marrero-Rosa Raul, Gomaa Shady, Irizarry Elmer, Ahmed Hassan et al. (2025-10)
    Additive Manufacturing of Ultra-High-Performance Concrete:
    From Mechanical Characterization to Large-Scale Application
48. Sun Hou-Qi, Zeng Jun-Jie, Xie Shan-Shan, Xia Jun-Run et al. (2025-09)
    Mechanical and Microstructural Characterization of Interlayer Bonding in Multi-Material 3D-Printed Concrete
49. Tian Xin, Shi Anqi, Fang Zhi, Lin Alexander (2025-09)
    Multi-Interface Effects on Mechanical Behavior in 3D-Printed Concrete Shear Keys:
    A Finite Element Modeling Strategy
50. Jiang Youbau, Wen Jun, Gao Pengxiang, Liu Yan et al. (2025-09)
    Effect of Graphene Oxide on Physical and Mechanical Properties of 3D Printed Concrete
51. Li Fuhai, Xiao Sai, Yang Bo, Li Kepu et al. (2025-09)
    Mechanical Properties and Anisotropy of 3D-Printed Concrete Modified with Multiscale Materials Based on Optimized Printing Process Design
52. Liu Shijie, Liu Tong, Alqurashi Muwaffaq, Abdou Elabbasy Ahmed et al. (2025-09)
    Advancing 3D-Printed Fiber-Reinforced Concrete for Sustainable Construction:
    A Comparative Optimization Based Study of Hybrid Machine Intelligence Models for Predicting Mechanical Strength and CO₂ Emissions
53. Rahman S., Khair Sanjida, Shaikh Faiz, Sarker Prabir (2025-09)
    Decarbonized 3D Printed Concrete Incorporating Lithium Slag and PVA Fiber:
    Buildability, Mechanical, and Microstructural Insights
54. Zhang Yifan, Aslani Farhad (2025-08)
    Mechanical and Ultrasonic Pulse Velocity Performance of 3D Printed Rubberised Cementitious Composites Reinforced with PVA Fibers
55. Si Wen, Carr Liam, Zia Asad, Khan Mehran et al. (2025-08)
    Advancing 3D Printable Concrete with Nanoclays:
    Rheological and Mechanical Insights for Construction Applications
56. Maroszek Marcin, Hager Izabela, Mróz Katarzyna, Sitarz Mateusz et al. (2025-08)
    Anisotropy of Mechanical Properties of 3D-Printed Materials:
    Influence of Application Time of Subsequent Layers
57. Si Wen, Khan Mehran, McNally Ciaran (2025-08)
    Effect of Nano Silica with High Replacement of GGBS on Enhancing Mechanical Properties and Rheology of 3D Printed Concrete
58. Yang Xia, Wang Jiuyuan, Huang Han, Wu Gengchen et al. (2025-08)
    Anti-Washout Cement-Based Material for Under-Seawater 3D Concrete Printing:
    Design, Mechanical Properties and Microstructural Analysis
59. Mani Aravindhraj, Sekar Muthu (2025-08)
    NDT Techniques for Evaluating Mechanical Properties in Green and Fiber-Reinforced 3D Printable Mixes
60. Wang Suguo, Wang Xing, Yan Xueyuan, Chen Shanghong (2025-08)
    Effects of Aggregate Size and Nozzle Diameter on Printability and Mechanical Properties of 3D Printed Ferronickel Slag-GGBFS Concrete
61. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Manalo Allan, Sanjayan Jay (2025-07)
    Rheological, Mechanical and Fire Resistance Performance of Waste Glass Activated Geopolymers for Concrete 3D Printing
62. Wang Jiakang, Anwar Muhammad, Zhu Xingyi, Zhang Yating et al. (2025-07)
    Robust Optimization of Formulation Ratios for the Mechanical, Microstructural and Printing Performance of Cost-Effective 3D Printing Geopolymer
63. Liu Shan, Hao Yifei (2025-07)
    Designing Sprayable EGC from Constructability to Mechanical Performance
64. Sahebi Soleyman, Aslani Farhad (2025-07)
    Mechanical Strength and Heat Tolerance of 3D Printed Rubberised Concrete at Elevated Temperatures
65. Ding Shengxuan, Li Jiren, Wang Mingqiang (2025-07)
    Study on Mechanical Properties of Composite Basalt Fiber 3D-Printed Concrete Based on 3D Meso-Structure
66. Pemas Sotirios, Baliakas Dimitrios, Pechlivani Eleftheria, Stefanidou Maria (2025-07)
    Mechanical Properties of Bio-Printed Mortars with Bio-Additives for Green and Sustainable Construction
67. Mim Nusrat, Hosan Anwar, Shaikh Faiz, Sarker Prabir (2025-07)
    Rheological and Early Age Mechanical Properties of 3D Printed Concrete Containing Copper Heap Leach Residue as Fine Aggregate
68. Mahmoodi Obaid, Siad Hocine, Lachemi Mohamed, Şahmaran Mustafa (2025-07)
    Recent Advances in CDW-Based Geopolymers:
    A Review of Mechanical Performance, Structural Application, 3D Printing, Durability and Sustainability
69. Ali Syed, Haq Mohd, Khan Rizwan, Hashmi Ahmad (2025-07)
    A Comprehensive Review on 3D Printing of Concrete:
    Materials, Methods and Mechanical Properties
70. Popli Siddharth, Valikhah Fatemeh, Zandi Lak Erfan, Das Sreekanta (2025-07)
    Mechanical and Durability Performance of 3D-Printed Concrete with Coarse Aggregates and Cold Joints
71. Wolfs Robert, Versteege Jelle, Santhanam Manu, Bhattacherjee Shantanu et al. (2025-06)
    Flexural and Tensile Strength:
    Mechanical Properties of 3D Printed Concrete
72. Mechtcherine Viktor, Muthukrishnan Shravan, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
    Compressive Strength and Modulus of Elasticity:
    Mechanical Properties of 3D Printed Concrete
73. Robens-Radermacher Annika, Kujath Cezary, Bos Freek, Mechtcherine Viktor et al. (2025-06)
    Design and Implementation of a Database System for Querying, Sharing, and Analyzing Experimental Data:
    Mechanical Properties of 3D Printed Concrete
74. Bos Freek, Menna Costantino, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
    Approach and Main Results:
    Mechanical Properties of 3D Printed Concrete
75. Ding Shengxuan, Li Jiren, Liu Yiming (2025-06)
    Study on Mechanical Properties and Environmental Benefits of 3D Printed Lean Magnesium Ore Concrete Filled Columns Based on Three-Dimensional Meso-Structure
76. Gailitis Rihards, Radina Liga, Pakrastins Leonids, Sprince Andina (2025-06)
    Mechanical and Early Long-Term Property Assessment of Foamed 3D-Printable Geopolymer Composite
77. Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2025-06)
    Effects of Nozzle Thickness on the Mechanical Properties of 3D Printable Ultra-High Performance Strain-Hardening Cementitious Composites (UHP-SHCC)
78. Pham Thi, Nguyen Thi, Huang Jie (2025-06)
    Experimental Study on Anisotropic Mechanical Properties of 3D Reinforced Concrete with Discrete Polyethylene Fibers
79. Ding Tao, Qu Changwei, Guo Dingming (2025-06)
    Thermal and Mechanical Properties of 3D Printed Functionally Graded Concrete:
    Utilizing Fibers and Recycled Aggregates as Gradient Components
80. Lin Xing-Tao, Xu Shuhao, Chen Xiangsheng, Huang Zhongkai (2025-06)
    3D Printed Concrete Tunnel Lining:
    Comparative Study on Mechanical Properties of Curved and Straight Printed Specimens
81. Kumar S., Muthu Nelson, Panda Biranchi (2025-06)
    Numerical Investigation of Structural Behavior of 3D-Printed Concrete Walls:
    Insights from Damage Mechanics and Cohesive Zone Approaches
82. Su Yanli, Wu Chang, Shang Jiaqi, Zhang Pu (2025-06)
    Mechanical Properties of 3D-Printed High-Ductility Cementitious Composite with Sulphoaluminate Cement and Modified Crumb Rubber
83. Song Xinlei, Xu Quanbiao, Wang Hailong, Sun Xiaoyan et al. (2025-05)
    Flowability-Dependent Anisotropic Mechanical Properties of 3D Printing Concrete:
    Experimental and Theoretical Study
84. Qi Pengfei, Wang Ziyuan, Yu Ruifang, Pei Qiang et al. (2025-05)
    Optimization Design and Regression Model Analysis of Mechanical Properties of 3D Printed Concrete
85. Sun Junbo, Aslani Farhad, Mann Dhruv, Huang Bo et al. (2025-05)
    Mechanical and Piezoresistive Behaviour of 3D Printed Self-Sensing One-Way Concrete Slab
86. Ding Tao, Peng Zechen, Dong Haining (2025-05)
    Mechanical Properties of CFRP Grid Reinforced 3D Printed Concrete Arch Structures
87. Raza Ali, Junjie Zhang, Fan Jiahui, Umar Muhammad et al. (2025-05)
    Comprehensive Study on the Microstructural and Mechanical Performance of 3D-Printed Engineered Cementitious Composites with Yellow River Sand Integration
88. Tang Boyang, Yan Jiachuan, Han Xiaoyu, Lin Yini et al. (2025-05)
    Mechanical Properties of Extrusion-Based 3D-Printed Concrete Considering the Thickness of the Printed Layer and Printing Time Interval
89. Asif Usama (2025-05)
    Comparative Analysis of Evolutionary Computational Methods for Predicting Mechanical Properties of Fiber-Reinforced 3D Printed Concrete
90. Zhang Bo, Tao Yaxin, Zhang Yi, Shields Yasmina et al. (2025-05)
    Mechanical Properties of 3D Printed Concrete with 2D Infill Patterns Including Print Path Crossings
91. Jaji Mustapha, Babafemi Adewumi, Zijl Gideon (2025-05)
    Mechanical Performance of Extrusion-Based Two-Part 3D-Printed Geopolymer Concrete:
    A Review of Advances in Laboratory and Real-Scale Construction Projects
92. Zahabizadeh Behzad, Pereira João, Pereira Eduardo, Cunha Vítor (2025-05)
    Self-Healing Assessment of Fiber Reinforced Cementitious Mortars Developed for 3D Concrete Printing:
    Recovery of Mechanical Performance and Self-Sealing Capability
93. Wang Guihua, Zhou Jiguo, Liu Haoyun, Zhang Jianming (2025-05)
    Rheological Properties and Mechanical Durability of 3D-Printed Concrete Based on Low-Field NMR
94. Zhang Bo, Corte Wouter, Ooms Ticho, Wan-Wendner Roman (2025-05)
    Mechanical Properties of Particle-Bed 3D Printed Concrete Infill Patterns
95. Hashimoto Katsufumi, Nakase Kota, Yoshihara Rei, Honda Yoshiki et al. (2025-04)
    Evaluation and Investigation of Material and Mechanical Property of 3D Printed Concrete by Means of Non-Destructive Testing Methods
96. Tanyildizi Harun, Seloglu Maksut, Bakri Abdullah Mohd, Razak Rafiza et al. (2025-04)
    The Rheological and Mechanical Properties of 3D-Printed Geopolymers:
    A Review
97. Sun Yifan, Ma Siqi, Chen Qingze, Chen Guoliang et al. (2025-04)
    Lunar Regolith Simulant-Derived 3D-Printed Geopolymers with Optimized Mechanical and Thermal Management Properties
98. Si Qi, Zhang Wenna, Pan Zhihong, Zheng Jianqiang et al. (2025-04)
    Study on the Mechanical and Durability Properties of 3D-Printed Bamboo Fiber-Reinforced Concrete
99. Shen Jianyu, Ye Taohua, Xiao Jianzhuang, Li Shuisheng (2025-04)
    Mechanical and Thermal Properties of 3D Printed Earth Concrete Solidified by Geopolymers:
    A Study of Utilizing Excavated Clay
100. Wang Chaofan, Li Bin, Chen Bing (2025-04)
     Enhancing Printability and Mechanical Performance of 3D Printed Magnesium Phosphate Cement Through Silica Fume Modification:
     Rheological, Microstructural, and Numerical Insights
101. Xiong Baocheng, Liu Huanbao, Nie Ping, Li Xiaoxi et al. (2025-04)
     Effect of Different Surface Modification Methods of Small Particle Size Recycled Rubber Powder on Mechanical Properties of 3D Printed Concrete
102. Zhou Biao, Zhou Hongru, Yoshioka Hideki, Noguchi Takafumi et al. (2025-04)
     Mechanical and Microstructure Evolution of 3D Printed Concrete Interlayer at Elevated Temperatures
103. Liu Chuanbei, Zou Mengtong, Chen Xuemei, Deng Yongjun et al. (2025-04)
     Feasibility Study of 3D-Printed Rubberized Concrete as a Permanent Formwork:
     Mechanical Properties, Interlayer Interface and Durability
104. Yassin Ahmed, Hafez Mohamed, Aboelhassan Mohamed (2025-04)
     Experimental and Numerical Investigation on the Effect of Different Types of Synthetic Fibers on the Flexure Behavior and Mechanical Properties of 3D Cementitious Composite Printing Provided with Cement CEM II/A-P
105. Tseng Kuo-Chang, Chi Maochieh, Yeih Weichung, Huang Ran (2025-04)
     Influence of Slag/Fly Ash as Partial Cement Replacement on Printability and Mechanical Properties of 3D-Printed Concrete
106. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wong Teck et al. (2025-03)
     Investigate Mechanisms of Different Printing Parameters on the Mechanical Anisotropy of 3D Concrete Printing Elements by Using Computed Tomography Scan and Computational Fluid Dynamics Methods
107. Yuan Hanquan, Dong Enlai, Jia Zijian, Jia Lutao et al. (2025-03)
     The Influence of Pore Structure and Fiber Orientation on Anisotropic Mechanical Property of 3D Printed Ultra-High-Performance Concrete
108. Givkashi Mohammad, Moodi Faramarz, Ramezanianpour Amir (2025-03)
     Investigating Shrinkage and Mechanical Properties of 3D Printed Concretes Under Different Curing Conditions
109. Şahin Hatice, Kaya Yahya, Akgümüş Fatih, Mardani Naz et al. (2025-03)
     Degradation of Mechanical Properties of 3D Fiber Reinforced Printed Concrete Mixtures Exposed to Elevated Temperatures
110. Aktürk Büşra, Ertuğrul Onur, Özen Ömer, Oktay Didem et al. (2025-03)
     Influence of Nano-Silica and R-MgO on Rheological Properties, 3D Printability, and Mechanical Properties of One-Part Sodium Carbonate-Activated Slag-Based Mixes
111. Li Qiyan, Wen Xiaodong, Gao Xiaojian (2025-02)
     Rheological and Mechanical Properties of 3D-Printable Magnesium-Oxysulfate-Cements
112. Zhang Bo, Zhang Yi, Ye Yihang, Hao Lulu et al. (2025-02)
     Influence of Contacts in 2D Infill Patterns on Mechanical Properties of 3D Printed Concrete Structures
113. Shen Qiang, Sun Dongpu, Lu Chenyu, Zhang Zhigang et al. (2025-02)
     Fresh and Anisotropic-Mechanical Properties of Polyoxymethylene Fibers Reinforced 3D Printable Cementitious Composites
114. Liu Xiongfei, Li Chuang, Guo Pei, Wang Li et al. (2025-02)
     Spray-Based 3D Printed Tunnel Slag Concrete:
     Evaluation for Printability and Mechanical Performance
115. Park Ji-seul, Jeong Seung-Su, Hong Seungkee, Lee Seohyung et al. (2025-02)
     Mechanical Modeling for Prediction of Structural Stability of Cylindrical Structures During 3D Concrete Printing
116. Chourasia Ajay, Pal Biswajit, Kapoor Ashish (2025-02)
     Influence of Printing Direction and Interlayer Printing Time on the Bond Characteristics and Hardened Mechanical Properties of Agro-Industrial Waste-Based 3D Printed Concrete
117. An Xuehui, Liang Qimin, Li Pengfei, You Wei et al. (2025-02)
     Experimental Assessment on Printing Performance and Mechanical Properties of Underwater Self-Protecting 3D Printing Concrete
118. Chen Wenguang, Liang Long, Zhou Boyang, Ye Junhong et al. (2025-02)
     A Fracture Mechanics Model for Predicting Tensile Strength and Fracture Toughness of 3D Printed Engineered Cementitious Composites
119. Xia Zhenjiang, Geng Jian, Zhou Zhijie, Liu Genjin (2025-01)
     Comparative Analysis of Polypropylene, Basalt, and Steel Fibers in 3D Printed Concrete:
     Effects on Flowability, Printabiliy, Rheology, and Mechanical Performance
120. Chen Wei, Guan Yongying, Zhu Binrong, Han Jinsheng et al. (2025-01)
     Influence of Extruded Strip-Shape and Dimension on the Mechanical Properties and Pore-Characteristics of 3D Printed Geopolymer Concrete
121. Tanyildizi Harun, Coskun Ahmet, Seloglu Maksut, Durmaz Taner (2025-01)
     Examination of Mechanical Properties of 3D Printed Geopolymer-Mortar Using the Taguchi -Method
122. Sun Junbo, Wang Yufei, Yang Xin, Wang Haihong et al. (2025-01)
     Red Mud Utilization in Fiber-Reinforced 3D Printed Concrete:
     Mechanical Properties and Environmental Impact Analysis
123. Zhang Yonghong, Cui Suping, Yang Bohao, Wang Xinxin et al. (2025-01)
     Research on 3D Printing Concrete Mechanical Properties-Prediction-Model Based on Machine-Learning
124. Lyu Qifeng, Wang Yalun, Chen Dongjian, Liu Shiyuan et al. (2025-01)
     Energy Storage Properties and Mechanical Strengths of 3D Printed Porous Concrete Structural Supercapacitors Reinforced by Electrodes Made of Carbon-Black-Coated Ni Foam
125. Shahzad Qamar, Li Fangyuan (2025-01)
     Impact of Concrete Interfaces on the Mechanical Performance of 3D Printed Concrete Structures
126. Hassan Amer, Alomayri Thamer, Noaman Mohammed, Zhang Chunwei (2025-01)
     3D Printed Concrete for Sustainable Construction:
     A Review of Mechanical Properties and Environmental Impact
127. Jiang Youbau, Gao Pengxiang, Adhikari Sondipon, Yao Xiaofei et al. (2024-12)
     Studies on the Mechanical Properties of Inter-Layer Interlocking 3D Printed Concrete Based on a Novel Nozzle
128. Li Yeou-Fong, Liang Yu-Fang, Syu Jin-Yuan, Huang Chi-Hong et al. (2024-12)
     Static and Dynamic Mechanical Characteristics of 3D Printed Anisotropic Basalt Fiber-Reinforced Cement Mortar
129. Zhao Zhihui, Cai Xianhuan, Chen Fan, Gong Yongfan et al. (2024-12)
     Effect of Wollastonite-Content on Rheology and Mechanical Properties of 3D Printed Magnesium-Potassium-Phosphate-Cement-Based Material of MgO-SiO2-K2HPO4
130. Liu Junxing, Li Peiqi, Piao Taiyan, Im Sumin et al. (2024-12)
     High-Alumina Cementitious Materials for Binder-Jetting 3D Printing:
     Exploring Suitable Mixing-Ratio and Curing-Solution for Improving Mechanical Properties and Hydration-Reaction
131. Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-12)
     Influence of the Nozzle Geometry on Mechanical Properties of 3D Printed Concrete:
     Experiment and Finite Element Study
132. Aminpour Nima, Memari Ali (2024-12)
     Analysis of Anisotropic Behavior in 3D Concrete Printing for Mechanical Property Evaluation
133. Gurunandan M., Mala Hiranya, Nanthagopalan Prakash (2024-12)
     Effect of Water-to-Binder, Aggregate-to-Binder-Ratio and Admixtures on Printability and Mechanical Properties of 3D Printable Mortar Mixtures
134. Glotz Theresa, Rasehorn Inken, Petryna Yuri (2024-12)
     Mechanical Behavior of Hardened Printed Concrete and the Effect of Cold Joints:
     An Experimental Investigation
135. Zhang Yu, Yu Zhengxing, Zhang Yunsheng, Zhang Jiufu et al. (2024-12)
     Study on the Predictive Model for Continuous Build-Height of 3D Printed Concrete Based on Printability and Early Mechanical Properties
136. Alarrak Rashed, Brand Alexander (2024-12)
     Mechanical Performance of Extruded Functionally-Graded Fiber-Reinforced Mortar with Targeted Fiber-Injection
137. Li Ben, Li Kaihang, Lyu Xuetao, Zhao Canhao et al. (2024-12)
     Microscopic Mechanism and Predicting Calculation on Mechanical Properties of Basalt-Fiber-Modified 3D Printing Cement-Based Materials
138. Yaqub Walid, Aslani Farhad (2024-12)
     Mechanical Properties and Fire-Resistance of 3D Printed Cementitious Composites with Plastic Waste
139. Liu Huawei, Wang Yifei, Zhu Chao, Wu Yiwen et al. (2024-11)
     Design of 3D Printed Concrete Masonry for Wall Structures:
     Mechanical Behavior and Strength Calculation Methods Under Various Loads
140. Ali Mohd, Rub Rashid, Banat Fawzi, Kim Tae-Yeon (2024-11)
     Enhancing the Printing Quality and Mechanical Properties of 3D Printed Cement Composites with Date-Syrup-Based Graphene-Coated-Sand Hybrid
141. Luo Surong, Jin Wenhao, Wu Weihong, Zhang Kaijian (2024-11)
     Rheological and Mechanical Properties of Polyformaldehyde-Fiber-Reinforced 3D Printed High-Strength Concrete with the Addition of Fly-Ash
142. Wu Mushuang, Wang Zixiao, Chen Yuxuan, Zhu Mengyu et al. (2024-11)
     Effect of Steel-Slag on Rheological and Mechanical Properties of Sulfoaluminate-Cement-Based Sustainable 3D Printing Concrete
143. Lori Ali, Mehrali Mehdi (2024-11)
     Mechanical Properties and Crack-Deflection Mechanisms in 3D Printed Porous Geopolymers with Cellular Structures
144. Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Yang Min et al. (2024-11)
     Enhancing Mechanical Properties of 3D Printed Cementitious Composites Utilizing Hybrid Recycled PP and PET-Fibers
145. Najvani Mohammad, Murcia Daniel, Taha Mahmoud (2024-11)
     Evolution of Early-Age Mechanical and Failure Behavior of 3D Printed Polymer Concrete
146. Wu Xikai, Shi Qingxuan, Huo Jian, Zhao Yu et al. (2024-11)
     Experimental Study on Buildability and Mechanical Properties of 3D Printing Cob
147. Li L., Fang Z., Chu S., Kwan Albert (2024-11)
     Improving Mechanical Properties of 3D Printed Mortar by Exploiting Synergistic Effects of Fly-Ash-Microsphere and Nano-Silica
148. Yasin Mazhar, Siddiqi Zahid, Ur Rehman Atteq, Noshin Sadaf et al. (2024-11)
     Innovative Early-Age Mechanical Properties of 3D Printable Mortar Enhanced with SBR-Latex and Kaolin
149. Skibicki Szymon, Dvořák Richard, Pazdera Luboš, Topolář Libor et al. (2024-11)
     Anisotropic Mechanical Properties of 3D Printed Mortar Determined by Standard Flexural and Compression-Test and Acoustic Emission
150. Zhao Herui, Jiang Quan, Xia Yong, Liu Jian et al. (2024-11)
     Microbial-Induced Carbonate Reinforcement for 3D Printed Concrete:
     Testing in Printable and Mechanical Strength
151. Li Jiannan, Singh Amardeep, Zhao Yasong, Sun Jingting et al. (2024-11)
     Enhancing Thermo-Mechanical and Moisture Properties of 3D Printed Concrete Through Recycled Ultra-Fine Waste-Glass-Powder
152. Wang Bolin, Yang Min, Liu Shilong, Liu Xianda et al. (2024-10)
     Research on Mechanical Properties of a 3D Concrete Printing Component-Optimized Path by Multi-Modal Analysis
153. Yang Yekai, Zhang Chiyu, Liu Zhongxian, Dong Liang et al. (2024-10)
     Effect of Hydration Process on the Inter-Layer Bond Tensile Mechanical Properties of Ultra-High-Performance Concrete for 3D Printing
154. Chen Yidong, Zhang Yunsheng, Quan Hongzhu, Liu Cheng et al. (2024-10)
     Early-Age Time-Dependent Mechanical Properties of 3D Printed Concrete with Coarse Aggregates
155. Cai Jianguo, Wang Jingsong, Zhang Qian, Du Caixia et al. (2024-10)
     State of the Art of Mechanical Properties of 3D Printed Concrete
156. Rodriguez Fabian, Moini Mohamadreza, Agrawal Shubham, Williams Christopher et al. (2024-10)
     Mechanical Response of Small-Scale 3D Printed Steel-Mortar Composite Beams
157. Sorgenfrei Reese, Zandifaez Peyman, Zhou Hongyu, Fiske Michael (2024-10)
     Investigating the Effect of Air-Voids on the Mechanical Properties of 3D Printable Cementitious Composites
158. Park Keunhyoung, Memari Ali, Hojati Maryam, Radlińska Aleksandra et al. (2024-10)
     Effects of Anisotropic Mechanical Behavior on Nominal Moment Capability of 3D Printed Concrete Beam with Reinforcement
159. Chen Yuning, Xia Kailun, Dong Enlai, Cao Ruilin et al. (2024-10)
     A Mechanical Characteristic Capture-Method Considering Printing-Configurations for Buildability-Modeling in Concrete 3D Printing
160. Shen Kaige, Ding Tao, Cai Chen, Xiao Jianzhuang et al. (2024-09)
     Feasibility-Analysis of 3D Printed Concrete with Sludge-Incineration-Slag:
     Mechanical Properties and Environmental Impacts
161. Tran Nhi, Tran Mien, Tran Jonathan, Nguyen Anh et al. (2024-09)
     Eco-Friendly 3D Printed Concrete Using Steel-Slag-Aggregate:
     Buildability, Printability and Mechanical Properties
162. Han Kang, Gu Fei, Yang Huashan, Tian Xinchen et al. (2024-09)
     PVA-Fiber-Reinforced Red Mud-Based Geopolymer for 3D Printing:
     Printability, Mechanical Properties and Microanalysis
163. Sheng Zhaoliang, Zhu Binrong, Cai Jingming, Han Jinsheng et al. (2024-09)
     Influence of Waste-Glass-Powder on Printability and Mechanical Properties of 3D Printing Geopolymer Concrete
164. Tarhan Yeşim, Tarhan İsmail, Jacquet Yohan, Perrot Arnaud (2024-09)
     Mechanical Behavior of 3D Printed and Textile-Reinforced Eco-Friendly Composites
165. Baytak Tugba, Gdeh Tawfeeq, Jiang Zhangfan, Arce Gabriel et al. (2024-09)
     Rheological, Mechanical, and Environmental Performance of Printable Graphene-Enhanced Cementitious Composites with Limestone and Calcined Clay
166. Wang Xiangyu, Du Liangfen, Liu Zhenbang, Li Mingyang et al. (2024-09)
     3D Cementitious Composites Printing with Pretreated Recycled Crumb-Rubber:
     Mechanical and Acoustic Insulation Properties
167. Nana W., Baz Bilal, Blachier Christian, Peraud Mickaël et al. (2024-09)
     Mechanical Performance of 3D Printed Fiber-Reinforced Concrete
168. Negron-McFarlane Christian, Kreiger Eric, Kreiger Megan (2024-09)
     Determination of Print Speed Based on the Fresh Mechanical Strength over Time of Additively Constructed Concrete by Unconfined Compression
169. Bono Victor, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2024-09)
     Tailored Low-Carbon Footprint Cementitious Material for 3D Printing:
     Strategies for Rheology Adjustment and Mechanical Performance Estimation
170. Zhan Yiyuan, Lesage Karel, Schutter Geert (2024-09)
     Mechanical Properties of 3D Printable Responsive Cement Mortar After Magnetic Intervention
171. Jacquet Yohan, Maierdan Yierfan, Kawashima Shiho, Perrot Arnaud (2024-09)
     Stability-Prediction of 3D Printable Fresh Construction Materials by Analyzing Thixotropic Compressive Properties Using Extensional Dynamic Mechanical Analysis
172. Irizarry Elmer, Gomaa Shady, Rosa Raul, Ahmed Ayesha et al. (2024-09)
     Mechanical Characterization of 3D Printed Ultra-High-Performance Concrete
173. Wei Yazhi, Zhang Hui (2024-09)
     Influence of Temperature and Humidity on Mechanical Properties of Calcined-Oyster-Shell-Powder-Modified 3D Printed Concrete
174. Yao Yiming, Zhang Jiawei, Sun Yuanfeng, Pi Yilin et al. (2024-08)
     Mechanical Properties and Failure Mechanism of 3D Printing Ultra-High-Performance Concrete
175. Mani Aravindhraj, Sekar Muthu (2024-08)
     Non-Destructive Testing Techniques for Investigating Mechanical Property and Porosity-Disparities in Extrusion 3D Printed Concrete
176. Huseien Ghasan, Tan Shea, Saleh Ali, Lim Nor et al. (2024-08)
     Test-Procedures and Mechanical Properties of Three-Dimensional Printable Concrete Enclosing Different Mix-Proportions:
     A Review and Bibliometric Analysis
177. Fernand Muhirwa, Li Yaqi, Qian Qiwei, Chi Yin et al. (2024-08)
     Effects of Coarse Aggregates on 3D Printability and Mechanical Properties of Ultra-High-Performance Fiber-Reinforced Concrete
178. Şahin Hatice, Akgümüş Fatih, Mardani Ali (2024-08)
     Mechanical and Rheological Properties of Fiber‐Reinforced 3D Printable Concrete in Terms of Fiber Content and Aspect Ratio
179. Yuan Shuaihua, Duan Dengke, Sun Junbo, Yu Yi et al. (2024-08)
     Mechanical, Alkali Excitation, Hydrothermal Enhancement of 3D Printed Concrete Incorporated with Antimony-Tailings
180. Glotz Theresa, Petryna Yuri (2024-08)
     Experimental Characterization of Anisotropic Mechanical Behavior and Failure-Mechanisms of Hardened Printed Concrete
181. Klik Przemysław, Cisowski Adam, Rządkowski Witold, Pyrzanowski Paweł et al. (2024-08)
     Investigation of Mechanical Properties of Structures Created with Use of Automatically Reinforced 3D Concrete Printing:
     Preliminary Study
182. Moini Mohamadreza, Rodriguez Fabian, Olek Jan, Youngblood Jeffrey et al. (2024-07)
     Mechanical Properties and Fracture Phenomena in 3D Printed Helical Cementitious Architected Materials Under Compression
183. Lyu Xin, Elchalakani Mohamed, Wang Xiangyu, Sun Junbo et al. (2024-07)
     Mechanical Performance and Anisotropic Analysis of Rubberised 3D Printed Concrete Incorporating PP-Fiber
184. Srinivas Dodda, Ventrapragada Durga, Panda Biranchi, Sitharam Thallak (2024-07)
     A Study on the Effect of Mixture Constituents on Washout-Resistance, Mechanical, and Transport Properties in the Context of Underwater 3D Concrete Printing
185. Luo Qiling, Yu Ke-Ke, Long Wujian, Zheng Shuyi et al. (2024-07)
     Influence of Different Types of Superabsorbent Polymers on Fresh Mechanical Properties and Inter-Layer Adhesion of 3D Printed Concrete
186. Wu Yiwen, Liu Chao, Liu Huawei, Bai Guoliang et al. (2024-07)
     Mechanism of the Influence of Multi-Scale Pore-Structure on the Triaxial Mechanical Properties of 3D Printed Concrete with Recycled Sand
187. Geng Zifan, Zhang Lizhi, Wu Zhiwen, Tay Yi et al. (2024-07)
     Mechanical Properties and Additive Manufacturing of Alkali-Activated Lunar Regolith in Artificial Lunar Environments
188. Boddepalli Uday, Panda Biranchi, Gandhi Indu (2024-07)
     Impact of Water to Solids Ratio on Stability, Printability, and Mechanical Characteristics of 3D Printable Foam-Concrete
189. Liu Zhenbang, Li Mingyang, Liu Zhixin, Wong Teck (2024-07)
     Effects of Vinyl-Acetate and Ethylene-Copolymer on Printing and Mechanical Performances of 3D Printing Cementitious Materials
190. Jiang Fangming, Lin Manfang, Yu Kequan (2024-07)
     Mechanical Properties of 3D Printed ECC Beams Reinforced with FRP Mesh
191. Liew Kim, Li Gen, Yin Binbin, Sun Jinhua et al. (2024-07)
     Structural Deterioration and Mechanical Degradation of Limestone-Calcined-Clay-Cement Under Elevated Temperature
192. Markovic Ivan, Horat Alexandra, Pantellini Danilo (2024-07)
     Optimization of Earth-Based Mixtures in Terms of 3D Printability and Mechanical Properties:
     Feasibility Study
193. Zhang Xiaoyue, Huang Wanru, Chen Zhaohui (2024-07)
     Mechanical Behavior Investigation for the Timber-UHPC Shear Connector in 3D Printed Concrete-Based Composite Beam
194. Cui Weijiu, Shen Liang, Ji Dongsheng, Liu Wenliang et al. (2024-07)
     Mechanical Performance and Permeability of Low-Carbon Printable Concrete
195. Bai Meiyan, Xiao Jianzhuang, Shen Jianyu, Ding Tao et al. (2024-07)
     Printability and Mechanical Anisotropy of 3D Printed Concrete with Manufactured Sand Derived from Basalt
196. Masoud Laith, Hammoud Ahmad, Mortada Youssef, Masad Eyad (2024-06)
     Rheological, Mechanical, and Microscopic Properties of Polypropylene-Fiber-Reinforced Geopolymer Concrete for Additive Manufacturing
197. Muy Yeakleang, Courard Luc, Garnavault Xavier, Bulteel David et al. (2024-06)
     Mechanical Properties and Freezing and Thawing Behavior of 3D Printing Concrete Containing Recycled Fine Aggregates from Construction and Demolition Waste
198. Liu Junli, Haikola Pirjo, Fox Kate, Tran Jonathan (2024-06)
     3D Printing of Cementitious Composites with Seashell-Particles:
     Mechanical and Microstructural Analysis
199. Nakase Kota, Hashimoto Katsufumi, Sugiyama Takafumi, Kono Katsuya (2024-06)
     Influence of Print Paths on Mechanical Properties and Fracture Propagation of 3D Printed Concrete
200. Yang Chao, Xu Xinglong, Lei Zuxiang, Sun Junbo et al. (2024-06)
     Enhancing Mechanical Properties of Three-Dimensional Concrete at Elevated Temperatures Through Recycled Ceramic-Powder Treatment Methods
201. Kilic Ugur, Soliman Nancy, Omran Ahmed, Ozbulut Osman (2024-06)
     Effects of Cellulose Nanofibrils on Rheological and Mechanical Properties of 3D Printable Cement Composites
202. Wang Changqing, Du Zicheng, Zhang Yu, Ma Zhiming (2024-06)
     Elaborating the 3D Microstructural Characteristics and Strength Softening Mechanical Mechanism of Fiber-Reinforced Recycled Aggregate Concrete
203. Shao Yulong, Yang Jingwei, Kim Jineon, Song Jaejoon et al. (2024-05)
     Microscopic Analysis of Mechanical Anisotropy and Damage-Evolution of 3D Printed Rock-Like Samples Under Uniaxial Compressive Tests
204. Mathew Ashitta, Philip Nivin, Jędrzejewska Agnieszka (2024-05)
     Enhancing Sustainability and Performance of 3D Printing Mortar with Alccofine 1203, GGBS, and Kaolin:
     Experimental Investigation and Mechanical Characterization
205. Taqa Ala, Mohsen Mohamed, Aburumman Mervat, Naji Khalid et al. (2024-05)
     Nano-Fly-Ash and Clay for 3D Printing Concrete Buildings:
     A Fundamental Study of Rheological, Mechanical and Microstructural Properties
206. Liu Zhenbang, Li Mingyang, Wong Teck, Tan Ming (2024-05)
     Determine the Effects of Pore Properties on the Mechanical Performances of 3D Concrete Printing Units with Experimental and Numerical Methods
207. Liu Qiong, Tang Huilin, Chen Kailun, Peng Bin et al. (2024-05)
     Utilizing CO2 to Improve Plastic Shrinkage and Mechanical Properties of 3D Printed Mortar Made with Recycled Fine Aggregates
208. Liu Xiongfei, Zhao Xi, Wang Nan, Zhang Yi et al. (2024-05)
     Powder-Based 3D Printed Magnesium Phosphate Cement:
     Mechanical Isotropy Optimization Using Borax
209. Salari Farid, Zocca Andrea, Bosetti Paolo, Hlaváček Petr et al. (2024-05)
     Powder-Bed 3D Printing by Selective Activation of Magnesium-Phosphate-Cement:
     Determining Significant Processing Parameters and Their Effect on Mechanical Strength
210. Bayrak Alper, Shaban Nefize, Seyedian Choubi Sepehr, Tuncer Emran et al. (2024-05)
     Spatial Variation of Physical, Mechanical, and Thermophysical Properties of 3D Printed Concrete Across a Full-Scale Wall
211. Boddepalli Uday, Gandhi Indu, Panda Biranchi (2024-05)
     Synergistic Effect of Fly-Ash and Polyvinyl-Alcohol-Fibers in Improving Stability, Rheology, and Mechanical Properties of 3D Printable Foam-Concrete
212. Yang Yekai, Lu Pengyuan, Liu Zhongxian, Dong Liang et al. (2024-04)
     Effect of Steel-Fiber with Different Orientations on Mechanical Properties of 3D Printed Steel-Fiber-Reinforced Concrete:
     Meso-Scale Finite-Element-Analysis
213. Corso Marla, Silva Maicon, Cardoso Flávia, Heck Stenio et al. (2024-04)
     Effect of the Addition of Graphite and Graphene-Oxide in the Mechanical Properties and Adsorption of CO2 in Cementitious Filaments
214. Jia Zijian, Kong Lingyu, Jia Lutao, Ma Lei et al. (2024-04)
     Printability and Mechanical Properties of 3D Printing Ultra-High-Performance Concrete Incorporating Limestone-Powder
215. Ding Yahong, Zhang Yaqi, Zhao Yu, Zhang Meixiang et al. (2024-04)
     Impact of Pre-Soaked Lime-Water-Carbonized Recycled Fine Aggregate on Mechanical Properties and Pore-Structure of 3D Printed Mortar
216. Tripathi Avinaya, Nair Sooraj, Chauhan Harshitsinh, Neithalath Narayanan (2024-04)
     Print Geometry Alterations and Layer-Staggering to Enhance Mechanical Properties of Plain and Fiber-Reinforced Three-Dimensional-Printed Concrete
217. Carcassi Olga, Maierdan Yierfan, Akemah Tashania, Kawashima Shiho et al. (2024-03)
     Maximizing Fiber-Content in 3D Printed Earth Materials:
     Printability, Mechanical, Thermal and Environmental Assessments
218. Jia Zijian, Zhou Mengting, Chen Yu, Wang Wei et al. (2024-03)
     Effect of Steel-Fiber Shape and Content on Printability, Microstructure and Mechanical Properties of 3D Printable High-Strength Cementitious Materials
219. Ali Mohd, Nassrullah Ghaith, Al-Rub Rashid, Khaswaneh Bashar et al. (2024-03)
     Influence of Carbon-Nano-Tubes on Printing Quality and Mechanical Properties of 3D Printed Cementitious Materials
220. Gou Hongxiang, Sofi Massoud, Zhang Zipeng, Zhu Mintao et al. (2024-03)
     Combined Printable and Mechanical Analysis of 3D Printed Green High-Strength, Lightweight Engineered Cementitious Composites
221. Liu Xiongfei, Wang Nan, Zhang Yi, Ma Guowei (2024-02)
     Optimization of Printing Precision and Mechanical Property for Powder-Based 3D Printed Magnesium Phosphate Cement Using Fly-Ash
222. İlcan Hüseyin, Özkılıç Hamza, Tuğluca Merve, Şahmaran Mustafa (2024-02)
     Inter-Layer Mechanical Performance of 3D Printed Cementitious Systems:
     A Comprehensive Study on Operational and Material Parameters
223. Şahin Hatice, Mardani Ali, Beytekin Hatice (2024-02)
     Effect of Silica-Fume Utilization on Structural Build-Up, Mechanical and Dimensional Stability Performance of Fiber-Reinforced 3D Printable Concrete
224. Zhang Hongmei, Hu Fan, Duan Yuanfeng, Liao Jian et al. (2024-02)
     Mechanical Properties and Micro-Structure of Highly Flowable Geopolymer Composites with Low-Content Polyvinyl-Alcohol-Fiber
225. Li Weihong, Chen Xuhao, Wang Yaoyu, Wan Detian et al. (2024-02)
     Effect of Embedded Filament Fibers on Mechanical Properties of 3D Printing Cement-Based Materials
226. Prihar Arjun, Garlock Maria, Najmeddine Aimane, Moini Mohamadreza (2024-01)
     Mechanical Performance of Sinusoidally Architected Concrete Enabled by Robotic Additive Manufacturing
227. Pal Biswajit, Chourasia Ajay, Kapoor Ashish (2024-01)
     Intricacies of Various Printing Parameters on Mechanical Behavior of Additively Constructed Concrete
228. Özalp Fatih (2024-01)
     Mechanical Behavior and Permeability Properties of Sustainable and High-Performance Anisotropic Three-Dimensional Printable Concrete
229. Dai Pengfei, Lyu Qifeng, Zong Meirong, Zhu Pinghua (2024-01)
     Effect of Waste-Plastic-Fibers on the Printability and Mechanical Properties of 3D Printed Cement Mortar
230. Li Zihan, Liu Huanbao, Nie Ping, Cheng Xiang et al. (2023-12)
     Mechanical Properties of Concrete Reinforced with High-Performance Micro-Particles for 3D Concrete Printing
231. Azimi Zahir, Mousavi Moein, Bengar Habib, Javadi Akbar (2023-12)
     Study on the Post-Fire Mechanical Properties of Lightweight 3D Printed Concrete Containing Expanded Perlite as Partial Replacement of Natural Sand
232. Liu Ke, Takasu Koji, Jiang Jinming, Zu Kun et al. (2023-12)
     Mechanical Properties of 3D Printed Concrete Components:
     A Review
233. Li Yeou-Fong, Tsai Pei-Jen, Syu Jin-Yuan, Lok Man-Hoi et al. (2023-12)
     Mechanical Properties of 3D Printed Carbon Fiber-Reinforced Cement Mortar
234. Warsi Syed, Panda Biranchi, Biswas Pankaj (2023-12)
     Exploring Fiber Addition Methods and Mechanical Properties of Fiber-Reinforced 3D Printed Concrete:
     A Review
235. Straßer Alexander, Kränkel Thomas, Gehlen Christoph (2023-12)
     Integrating Wire Arc Additive Manufacturing into Selective Paste-Intrusion for Reinforced Concrete Elements:
     Effect of Temperature on the Mechanical Performance
236. Warsi Syed, Srinivas Dodda, Panda Biranchi, Biswas Pankaj (2023-12)
     Investigating the Impact of Coarse Aggregate Dosage on the Mechanical Performance of 3D Printable Concrete
237. Carvalho Ivo, Melo Abcael, Melo Carlos, Brito Mateus et al. (2023-12)
     Evaluation of the Effect of Rubber-Waste-Particles on the Rheological and Mechanical Properties of Cementitious Materials for 3D Printing
238. Zavaleta Diana, Ñañez Robert, Silva Guido, Ruiz Gaby et al. (2023-11)
     Additive Construction Using Enhanced Earthen-Based Composites:
     Improvement of the Mechanical Strength and Water Durability Using Chitosan and Agave-Fibers
239. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-11)
     Slag-Modified Metakaolin-Based 3D Printed Geopolymer:
     Mechanical Characterisation, Microstructural Properties, and Nitrogen Physisorption Pore-Analysis
240. Ungureanu Dragoș, Onuțu Cătălin, Țăranu Nicolae, Vornicu Nicoleta et al. (2023-11)
     Microstructure and Mechanical Properties of Cost-Efficient 3D Printed Concrete Reinforced with Polypropylene Fibers
241. Reinold Janis, Daadouch Koussay, Meschke Günther (2023-11)
     Numerical Simulation of Three Dimensional Concrete Printing Based on a Unified Fluid and Solid Mechanics Formulation
242. Bhusal Shiva, Sedghi Reza, Hojati Maryam (2023-11)
     Evaluating the Printability and Rheological and Mechanical Properties of 3D Printed Earthen Mixes for Carbon-Neutral Buildings
243. Tong Jiaqi, Ding Yahong, Lv Xiuwen, Ning Wei (2023-11)
     Effect of Carbonated Recycled Coarse Aggregates on the Mechanical Properties of 3D Printed Recycled Concrete
244. Gao Huaxing, Chen Yuxuan, Chen Qian, Yu Qingliang (2023-11)
     Thermal and Mechanical Performance of 3D Printing Functionally Graded Concrete:
     The Role of SAC on the Rheology and Phase Evolution of 3DPC
245. Šána Vladimír, Litoš Jiří, Kolář Karel (2023-10)
     Mechanical Properties of the New Cement Composite Mixture Appropriate for Robotic Processing
246. Lyu Qifeng, Dai Pengfei, Chen Anguo (2023-10)
     Mechanical Strengths and Optical Properties of Translucent Concrete Manufactured by Mortar-Extrusion 3D Printing with Polymethyl-Methacrylate Fibers
247. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-10)
     Comparative Studies of LC³- and Fly-Ash-Based Blended Binders in Fiber-Reinforced Printed Concrete:
     Rheological and Quasi-Static Mechanical Characteristics
248. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2023-10)
     Influence of Rheology on Mixing Homogeneity and Mechanical Behavior of Twin-Pipe 3D Printable Concrete
249. Lyu Qifeng, Dai Pengfei, Zong Meirong, Zhu Pinghua et al. (2023-10)
     Plant-Germination Ability and Mechanical Strength of 3D Printed Vegetation Concrete Bound with Cement and Soil
250. Sun Houchao, Li Furong, Shi Feiting (2023-10)
     Experimental Study on Dynamic Mechanical Properties of 3D Printed Cement-Based Materials Under Splitting Tension After High Temperature
251. Overmeir Anne, Šavija Branko, Bos Freek, Schlangen Erik (2023-09)
     Effects of 3D Concrete Printing Phases on the Mechanical Performance of Printable Strain-Hardening Cementitious Composites
252. Zhu Lingli, Yao Jie, Zhao Yu, Ruan Wenqiang et al. (2023-09)
     Printability and Early Mechanical Properties of Material-Composition Modified 3D Printing Engineered Cementitious Composites Based on the Response-Surface-Methodology
253. Liu Yi, Wang Li, Yuan Qiang, Peng Jianwei (2023-09)
     Effect of Coarse Aggregate on Printability and Mechanical Properties of 3D Printed Concrete
254. Liu Xiaoshuang, Zou Yuxiao, Wu Yingxuan, Cui Dong et al. (2023-09)
     The Effect of U-Type Expanding Agent for Concrete (UEA) on the Microstructural and Mechanical Properties of Mortar Fabricated Through Alternate 3D Printing
255. Ahmadi Khatereh, Mousavi Seyed, Dehestani Mehdi (2023-09)
     Influence of Nano-Coated Micro-Steel-Fibers on Mechanical and Self-Healing Properties of 3D Printable Concrete Using Graphene-Oxide and Polyvinyl-Alcohol
256. Mader Thomas, Schreter-Fleischhacker Magdalena, Shkundalova Olena, Neuner Matthias et al. (2023-09)
     Constitutive Modeling of Orthotropic Non-Linear Mechanical Behavior of Hardened 3D Printed Concrete
257. Nunes Gabrielly, Anjos Marcos, Lins Ana, Negreiros Ana et al. (2023-08)
     Evaluation of the Mechanical Behavior of Representative Volumetric Elements of 3DCP Masonry-Mixtures with Partial Replacement of Cement by Limestone-Filler and Metakaolin
258. Wang Yang, Qiu Liu-Chao, Hu Yan-Ye, Cheng Song-Gui et al. (2023-08)
     Influential Factors on Mechanical Properties and Microscopic Characteristics of Underwater 3D Printing Concrete
259. Zhang Yi, Zhu Yanmei, Ren Qiang, He Bei et al. (2023-08)
     Comparison of Printability and Mechanical Properties of Rigid and Flexible Fiber-Reinforced 3D Printed Cement-Based Materials
260. Du Longyu, Zhou Jiehang, Lai Jianzhong, Wu Kai et al. (2023-07)
     Effect of Pore-Structure on Durability and Mechanical Performance of 3D Printed Concrete
261. Rahal Said, Kaci Abdelhak, Skoudarli Abdeslam (2023-07)
     Evaluation of Mechanical Anisotropy-Induced by 3D Printing Process for Earth-Based Materials
262. Harbouz Ilhame, Rozière Emmanuel, Loukili Ahmed, Yahia Ammar (2023-07)
     Effect of the Structuration-Rate on Dimensional Stability and Mechanical Performance of 3D Printed Mortars
263. Wang Hao, Jiang Minghui, Hang Meiyan, Zhou Gangming et al. (2023-07)
     Research on the Mechanical Properties and Frost-Resistance of Aeolian Sand 3D Printed Mortar
264. Wang Chaofan, Chen Bing, Vo Thanh, Rezania Mohammad (2023-07)
     Mechanical Anisotropy, Rheology and Carbon Footprint of 3D Printable Concrete:
     A Review
265. Litoš Jiří, Šána Vladimír, Uhlík Adam, Kolář Karel et al. (2023-07)
     Mechanical and Physical Properties of Cement Mixtures for 3D Processing
266. Mu Ru, Mei Shaolin, Wang Xiaowei, Chen Xiangshang et al. (2023-06)
     Mechanical Properties of a 3D Printed SFRC Beam with Steel-Fiber-Distribution Adaptive to Tensile Stress
267. Hou Shaodan, Duan Zhenhua, Ye Taohua, Zou Shuai et al. (2023-06)
     Mechanical Properties and Pore-Structure of 3D Printed Mortar with Recycled Powder
268. Xu Zhuoyue, Zhang Dawang, Li Hui, Yin Le et al. (2023-06)
     Effects of Additives on the Mechanical Properties, Rheology, and Printing Properties of PCC-Based 3DPMs
269. Liu Junli, Tran Jonathan, Nguyen Vuong, Gunasekara Chamila et al. (2023-06)
     3D Printing of Cementitious Mortar with Milled Recycled Carbon-Fibers:
     Influences of Filament Offset on Mechanical Properties
270. Chen Wei, Pan Jinlong, Zhu Binrong, Ma XiaoMeng et al. (2023-06)
     Improving Mechanical Properties of 3D Printable One-Part Geopolymer Concrete with Steel-Fiber-Reinforcement
271. Richter Christiane, Jungwirth Jörg (2023-06)
     3D Concrete Printing:
     From Mechanical Properties to Structural Analysis
272. Ding Tao, Xiao Jianzhuang, Mechtcherine Viktor (2023-05)
     Microstructure and Mechanical Properties of Inter-Layer Regions in Extrusion-Based 3D Printed Concrete:
     A Critical Review
273. Shahzad Qamar, Li Fangyuan (2023-05)
     The Influence of Print-Path on Early-Age Plastic Bearing-Capacity and Mechanical Behavior of 3D Printed Concrete:
     A Novel Approach for Practical Applications
274. Tao Yaxin, Rahul Attupurathu, Mohan Manu, Schutter Geert et al. (2023-05)
     Enhancing Mechanical Performance of Twin-Pipe Printable Concrete Using a Binary Binder System
275. Yu Qian, Zhu Binrong, Li Xuesen, Meng Lingqi et al. (2023-04)
     Investigation of the Rheological and Mechanical Properties of 3D Printed Eco-Friendly Concrete with Steel-Slag
276. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Gowripalan Nadarajah (2023-04)
     Effects of Different Orientation-Angle, Size, Surface-Roughness, and Heat-Curing on Mechanical Behavior of 3D Printed Cement-Mortar with and without Glass-Fiber in Powder-Based 3DP
277. Seo Eun-A, Kim Won-Woo, Kim Sung-Wook, Kwon Hongkyu et al. (2023-03)
     Mechanical Properties of 3D Printed Concrete with Coarse Aggregates and Polypropylene-Fiber in the Air and Underwater Environment
278. Cui Weijiu, Wang Tianheng, Chen Xu, Shen Wenkai et al. (2023-03)
     Study of 3D Printed Concrete with Low-Carbon Cementitious Materials Based on Its Rheological Properties and Mechanical Performances
279. Chen Yanjuan, Kuva Jukka, Mohite Ashish, Li Zhongsen et al. (2023-03)
     Investigation of the Internal Structure of Hardened 3D Printed Concrete by X-CT Scanning and Its Influence on the Mechanical Performance
280. Sun Bochao, Li Peichen, Wang Dianchao, Ye Jun et al. (2023-03)
     Evaluation of Mechanical Properties and Anisotropy of 3D Printed Concrete at Different Temperatures
281. Luo Surong, Lin Qian, Xu Wei, Wang Dehui (2023-03)
     Effects of Interval Time and Interfacial Agents on the Mechanical Characteristics of Ultra-High-Toughness Cementitious Composites Under 3D Printed Technology
282. Dai Xiaodi, Tao Yaxin, Tittelboom Kim, Schutter Geert (2023-02)
     Rheological and Mechanical Properties of 3D Printable Alkali-Activated Slag Mixtures with Addition of Nano Clay
283. Wang Dianchao, Xiao Jianzhuang, Sun Bochao, Zhang Shipeng et al. (2023-02)
     Mechanical Properties of 3D Printed Mortar Cured by CO2
284. Şahin Hatice, Mardani Ali (2023-02)
     Mechanical Properties, Durability Performance and Inter-Layer Adhesion of 3DPC Mixtures:
     A State‐of‐the‐art Review
285. Ogura Hiroki, Yamamoto Shinya, Abe Hiroyuki (2023-01)
     Mechanical Properties of Fiber-Reinforced Cementitious Composites Manufactured Using 3D Printing Technology
286. Taleb Maria, Bulteel David, Betrancourt Damien, Roudet Francine et al. (2023-01)
     Multi-Scale Mechanical Characterization of the Interface in 3D Printed Concrete
287. Kosson Michael, Brown Lesa, Sanchez Florence (2023-01)
     Nano-Mechanical Characterization of 3D Printed Cement-Pastes
288. Zahabizadeh Behzad, Pereira João, Gonçalves Claúdia, Pereira Eduardo et al. (2022-12)
     Influence of the Printing-Direction and Age on the Mechanical Properties of 3D Printed Concrete:
     Correction
289. Shen Yuhang, Lin Li, Wei Shengjie, Yan Jie et al. (2022-12)
     Research on the Preparation and Mechanical Properties of Solidified 3D Printed Concrete Materials
290. Choo Joshua, Mohammed Bashar, Chen Pei-Shan, Abdulkadir Isyaka et al. (2022-12)
     Modeling and Optimizing the Effect of 3D Printed Origami-Bubble-Aggregate on the Mechanical and Deformation Properties of Rubberized ECC
291. Miranda Luiza, Marchesini Flávio, Lesage Karel, Schutter Geert (2022-12)
     The Evolution of the Rheological Behavior of Hydrating Cement Systems:
     Combining Constitutive Modeling with Rheometry, Calorimetry and Mechanical Analyses
292. Rubin Ariane, Quintanilha Lucas, Repette Wellington (2022-11)
     Influence of Structuration-Rate, with Hydration-Accelerating Admixture, on the Physical and Mechanical Properties of Concrete for 3D Printing
293. Liu Xiongfei, Li Jixiang, Li Qi, Hou Gunayu (2022-11)
     Mechanical Performance Optimization in Spray-Based Three-Dimensional-Printed Mortar Using Carbon-Fiber
294. Jiang Jinyang, Zheng Chaolang, Wang Fengjuan, Xu Wenxiang et al. (2022-11)
     Novel 3D Printing Phase-Change-Aggregate-Concrete:
     Mechanical and Thermal Properties Analysis
295. Kan Deyuan, Liu Guifeng, Cao Shuang, Chen Zhengfa et al. (2022-11)
     Mechanical Properties and Pore-Structure of Multi-Walled Carbon-Nano-Tube-Reinforced Reactive Powder-Concrete for Three-Dimensional Printing Manufactured by Material-Extrusion
296. Demiral Nazim, Ozkan Ekinci Mehmet, Şahin Oğuzhan, İlcan Hüseyin et al. (2022-10)
     Mechanical Anisotropy Evaluation and Bonding Properties of 3D Printable Construction and Demolition Waste-Based Geopolymer Mortars
297. Deng Zhicong, Jia Zijian, Zhang Chao, Wang Zhibin et al. (2022-10)
     3D Printing Lightweight Aggregate Concrete Prepared with Shell-Packing-Aggregate Method:
     Printability, Mechanical Properties and Pore-Structure
298. Machovec Jan, Štádler Marek, Kamenický Josef, Reiterman Pavel (2022-09)
     Mechanical Properties of Concrete Lintel Produced by 3D Printing
299. Dulaj Albanela, Salet Theo, Lucas Sandra (2022-09)
     Mechanical Properties and Self-Sensing Ability of Graphene-Mortar Compositions with Different Water-Content for 3D Printing Applications
300. Wang Li, Lin Wenyu, Ma Hui, Li Dexin et al. (2022-09)
     Mechanical and Microstructural Properties of 3D Printed Aluminate-Cement-Based Composite Exposed to Elevated Temperatures
301. Medicis Carolina, Gonzalez Sergio, Alvarado Yezid, Vacca Hermes et al. (2022-09)
     Mechanical Performance of Commercially Available Premix UHPC-Based 3D Printable Concrete
302. Kompella Sriram, Monte Francesco, Bassani Andrea, Guanziroli Stefano et al. (2022-09)
     A Comparative Study of Hardened-State Mechanical Properties of 3D Printed and Conventionally Cast Fiber-Reinforced Concrete
303. Zafar Muhammad, Bakhshi Amir, Hojati Maryam (2022-09)
     Toward 3D Printable Engineered Cementitious Composites:
     Mix-Design Proportioning, Flowability, and Mechanical Performance
304. Peng Guanhong (2022-08)
     Digital Fabrication and Mechanical Properties of 3D Printing Concrete
305. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2022-08)
     3D Printed Concrete as Stay-in-Place Formwork:
     Mechanics During Casting and Curing
306. Liu Xiongfei, Li Qi, Wang Fang, Ma Guowei (2022-07)
     Systematic Approach for Printability Evaluation and Mechanical Property Optimization of Spray-Based 3D Printed Mortar
307. Dong Liang, Yang Yekai, Liu Zhongxian, Ren Quanchang et al. (2022-07)
     Microstructure and Mechanical Behavior of 3D Printed Ultra-High-Performance Concrete after Elevated Temperatures
308. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu, Thiruvenkatamani G. (2022-06)
     Mechanical Properties and Failure-Pattern of 3D Printed Hollow Cylinders and Wall Segments under Uniaxial Loading
309. Abdalqader Ahmed, Sonebi Mohammed, Dedenis Marie, Amziane Sofiane et al. (2022-06)
     Mechanical Performance of 3D Printed Concrete Containing Fly-Ash, Metakaolin and Nano-Clay
310. Demont Léo, Charrier Malo, Margerit Pierre, Ducoulombier Nicolas et al. (2022-06)
     Flow-Based Pultrusion of Anisotropic Concrete:
     Mechanical Properties at Hardened State
311. Nefs Karsten, Overmeir Anne, Salet Theo, Suiker Akke et al. (2022-06)
     Consistency of Mechanical Properties of 3D Printed Strain-Hardening Cementitious Composites Within One Printing System
312. Han Nv, Xiao Jianzhuang, Zhang Lihai, Peng Yu (2022-06)
     A Micro-Scale-Based Numerical Model for Investigating Hygro-Thermo-Mechanical Behavior of 3D Printed Concrete at Elevated Temperatures
313. Jiang Quan, Liu Qiang, Wu Si, Zheng Hong et al. (2022-06)
     Modification Effect of Nano-Silica and Polypropylene-Fiber for Extrusion-Based 3D Printing Concrete:
     Printability and Mechanical Anisotropy
314. Geng Zifan, Pan Hao, Zuo Wenqiang, She Wei (2022-05)
     Functionally Graded Lightweight Cement-Based Composites with Outstanding Mechanical Performances via Additive Manufacturing
315. Aslani Farhad, Dale Ryan, Hamidi Fatemeh, Valizadeh Afsaneh (2022-05)
     Mechanical and Shrinkage Performance of 3D Printed Rubberised Engineered Cementitious Composites
316. Klyuev Sergey, Klyuev Alexander, Fediuk Roman, Ageeva Marina et al. (2022-04)
     Fresh and Mechanical Properties of Low-Cement Mortars for 3D Printing
317. Skibicki Szymon, Pułtorak Monika, Kaszyńska Maria, Hoffmann Marcin et al. (2022-04)
     The Effect of Using Recycled PET-Aggregates on Mechanical and Durability Properties of 3D Printed Mortar
318. Huang Xin, Yang Weihao, Song Fangnian, Zou Jiuqun (2022-04)
     Study on the Mechanical Properties of 3D Printing Concrete Layers and the Mechanism of Influence of Printing Parameters
319. Wang Bolin, Yao Xiaofei, Yang Min, Zhang Runhong et al. (2022-04)
     Mechanical Performance of 3D Printed Concrete in Steam-Curing Conditions
320. Zhou Ji, Hou Guanyu, Liu Xiongfei, Li Qi et al. (2022-04)
     Mechanical Properties of Spray-Based 3D Printed Micro-Cable-Reinforced Concrete
321. Liu Xiongfei, Li Qi, Li Jixiang (2022-04)
     Shrinkage and Mechanical Properties Optimization of Spray-Based 3D Printed Concrete by PVA-Fiber
322. Liu Qiang, Jiang Quan, Huang Mojia, Xin Jie et al. (2022-03)
     Modifying Effect of Anionic Polyacrylamide Dose for Cement-Based 3DP Materials:
     Printability and Mechanical Performance Tests
323. Pan Tinghong, Teng Huaijin, Liao Hengcheng, Jiang Yaqing et al. (2022-03)
     Effect of Shaping Plate Apparatus on Mechanical Properties of 3D Printed Cement-Based Materials:
     Experimental and Numerical Studies
324. Wang Bolin, Zhai Mingang, Yao Xiaofei, Wu Qing et al. (2022-03)
     Printable and Mechanical Performance of 3D Printed Concrete Employing Multiple Industrial Wastes
325. Yalçınkaya Çağlar (2022-03)
     Influence of Hydroxypropyl Methylcellulose Dosage on the Mechanical Properties of 3D Printable Mortars with and without Fiber-Reinforcement
326. Xiao Jianzhuang, Lv Zhenyuan, Duan Zhenhua, Hou Shaodan (2022-03)
     Study on Preparation and Mechanical Properties of 3D Printed Concrete with Different Aggregate-Combinations
327. Pham Luong, Lu Guoxing, Tran Jonathan (2022-02)
     Influences of Printing-Pattern on Mechanical Performance of Three-Dimensional-Printed Fiber-Reinforced Concrete
328. Singh Amardeep, Liu Qiong, Xiao Jianzhuang, Lyu Qifeng (2022-02)
     Mechanical and Macrostructural Properties of 3D Printed Concrete Dosed with Steel-Fibers under Different Loading-Direction
329. Ma Guowei, A Ruhan, Xie Panpan, Pan Zhu et al. (2022-01)
     3D Printable Aerogel-Incorporated Concrete:
     Anisotropy Influence on Physical, Mechanical, and Thermal Insulation Properties
330. Chen Yuning, Jia Lutao, Liu Chao, Zhang Zedi et al. (2022-01)
     Mechanical Anisotropy Evolution of 3D Printed Alkali-Activated Materials with Different GGBFS-FA Combinations
331. Hojati Maryam, Li Zhanzhao, Memari Ali, Park Keunhyoung et al. (2022-01)
     3D Printable Quaternary-Cementitious-Materials Towards Sustainable Development:
     Mixture Design and Mechanical Properties
332. Heever Marchant, Plessis Anton, Kruger Jacques, Zijl Gideon (2022-01)
     Evaluating the Effects of Porosity on the Mechanical Properties of Extrusion-Based 3D Printed Concrete
333. Skibicki Szymon, Jakubowska Patrycja, Kaszyńska Maria, Sibera Daniel et al. (2021-12)
     Early-Age Mechanical Properties of 3D Printed Mortar with Spent Garnet
334. Zhang Ying, Wan Zhiming, Wu Lei (2021-12)
     Study on Mechanical Properties of In-Situ Printed Reinforced Concrete Wall with Core Column
335. Wu Zixia, Xu Yading, Šavija Branko (2021-12)
     Mechanical Properties of Lightweight Cementitious Cellular Composites Incorporating Micro-Encapsulated Phase-Change-Material
336. Stidwell Samuel, Kreiger Eric (2021-12)
     Determination of Mechanical Properties of Additively Constructed Concrete Based on Specimen-Orientation
337. Sun Xiaoyan, Zhou Jiawei, Wang Qun, Shi Jiangpeng et al. (2021-11)
     PVA-Fiber-Reinforced High-Strength Cementitious Composite for 3D Printing:
     Mechanical Properties and Durability
338. Ma Lei, Zhang Qing, Jia Zijian, Liu Chao et al. (2021-11)
     Effect of Drying Environment on Mechanical Properties, Internal RH and Pore-Structure of 3D Printed Concrete
339. Liu Chao, Zhang Rongfei, Liu Huawei, He Chunhui et al. (2021-11)
     Analysis of the Mechanical Performance and Damage Mechanism for 3D Printed Concrete Based on Pore-Structure
340. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Tittelboom Kim et al. (2021-11)
     Mechanical and Microstructural Properties of 3D Printable Concrete in the Context of the Twin-Pipe Pumping-Strategy
341. Rahul Attupurathu, Mohan Manu, Schutter Geert, Tittelboom Kim (2021-10)
     3D Printable Concrete with Natural and Recycled Coarse Aggregates:
     Rheological, Mechanical and Shrinkage Behavior
342. Yang Yekai, Wu Chengqing, Liu Zhongxian, Wang Hailiang et al. (2021-10)
     Mechanical Anisotropy of Ultra-High-Performance Fiber-Reinforced Concrete for 3D Printing
343. Ge Zhi, Tawfek Abdullah, Zhang Hongzhi, Yang Yongwei et al. (2021-09)
     Influence of an Extrusion-Approach on the Fiber-Orientation and Mechanical Properties of Engineering Cementitious Composite
344. Liu Chenkang, Yue Songlin, Zhou Cong, Sun Honglei et al. (2021-08)
     Anisotropic Mechanical Properties of Extrusion-Based 3D Printed Layered Concrete
345. Choi Se-Jin, Kim Ji-Hwan, Jeong Hyojin, Lee Ja-Sung et al. (2021-08)
     Simulated and Experimental Investigation of the Mechanical Properties and Solubility of 3D Printed Capsules for Self-Healing Cement Composites
346. Lim Taeheun, Kim Seonghoon, Jo Kanghee, Jo Ilguk et al. (2021-07)
     Early Hydration and Mechanical Strength of Calcite-Ettringite-Seeds-Added Cement-Mixture for 3D Printing
347. Rehman Atta, Kim Jung-Hoon (2021-07)
     3D Concrete Printing:
     A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics
348. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2021-07)
     Mechanical Characterisation for Numerical Simulation of Extrusion-Based 3D Concrete Printing
349. Sambucci Matteo, Valente Marco (2021-06)
     Influence of Waste-Tire-Rubber-Particles-Size on the Microstructural, Mechanical, and Acoustic Insulation Properties of 3D Printable Cement Mortars
350. Song Hongwei, Li Xinle (2021-05)
     An Overview on the Rheology, Mechanical Properties, Durability, 3D Printing, and Microstructural Performance of Nanomaterials in Cementitious Composites
351. Sun Junbo, Huang Yimiao, Aslani Farhad, Wang Xiangyu et al. (2021-05)
     Mechanical Enhancement for EMW-Absorbing Cementitious Material Using 3D Concrete Printing
352. Chen Yidong, Zhang Yunsheng, Pang Bo, Liu Zhiyong et al. (2021-05)
     Extrusion-Based 3D Printing Concrete with Coarse Aggregate:
     Printability and Direction-Dependent Mechanical Performance
353. Cuevas Villalobos Karla, Chougan Mehdi, Martin Falk, Ghaffar Seyed et al. (2021-05)
     3D Printable Lightweight Cementitious Composites with Incorporated Waste-Glass-Aggregates and Expanded Microspheres:
     Rheological, Thermal and Mechanical Properties
354. Xiao Jianzhuang, Han Nv, Zhang Lihai, Zou Shuai (2021-05)
     Mechanical and Microstructural Evolution of 3D Printed Concrete with Polyethylene-Fiber and Recycled Sand at Elevated Temperatures
355. Zhang Hao, Zhu Liming, Zhang Fan, Yang Mijia (2021-04)
     Effect of Fiber Content and Alignment on the Mechanical Properties of 3D Printing Cementitious Composites
356. Zhu Binrong, Pan Jinlong, Zhou Zhenxin, Cai Jingming (2021-04)
     Mechanical Properties of Engineered Cementitious Composites Beams Fabricated by Extrusion-Based 3D
357. Zahabizadeh Behzad, Pereira João, Gonçalves Claúdia, Pereira Eduardo et al. (2021-03)
     Influence of the Printing-Direction and Age on the Mechanical Properties of 3D Printed Concrete
358. Ye Junhong, Cui Can, Yu Jiangtao, Yu Kequan et al. (2021-02)
     Effect of Polyethylene-Fiber Content on Workability and Mechanical-Anisotropic Properties of 3D Printed Ultra-High-Ductile Concrete
359. Chougan Mehdi, Ghaffar Seyed, Sikora Paweł, Chung Sang-Yeop et al. (2021-02)
     Investigation of Additive Incorporation on Rheological, Microstructural and Mechanical Properties of 3D Printable Alkali-Activated Materials
360. Meurer Maximilian, Claßen Martin (2021-02)
     Mechanical Properties of Hardened 3D Printed Concretes and Mortars:
     Development of a Consistent Experimental Characterization-Strategy
361. Ye Junhong, Cui Can, Yu Jiangtao, Yu Kequan et al. (2021-01)
     Fresh and Anisotropic-Mechanical Properties of 3D Printable Ultra-High-Ductile Concrete with Crumb-Rubber
362. Ly Océane, Yoris-Nobile Adrian, Sebaibi Nassim, Blanco-Fernandez Elena et al. (2020-11)
     Optimization of 3D Printed Concrete for Artificial Reefs:
     Biofouling and Mechanical Analysis
363. Joh Changbin, Lee Jungwoo, Bui The, Park Jihun et al. (2020-11)
     Buildability and Mechanical Properties of 3D Printed Concrete
364. Alchaar Aktham, Tamimi Adil (2020-10)
     Mechanical Properties of 3D Printed Concrete in Hot Temperatures
365. Sambucci Matteo, Marini Danilo, Sibai Abbas, Valente Marco (2020-08)
     Preliminary Mechanical Analysis of Rubber-Cement Composites Suitable for Additive Process Construction
366. Casagrande Lorenzo, Esposito Laura, Menna Costantino, Asprone Domenico et al. (2020-07)
     Mechanical Characterization of Cement-Based Mortar Used in 3DCP Including Early-Age Creep Effects
367. Sambucci Matteo, Valente Marco, Sibai Abbas, Marini Danilo et al. (2020-07)
     Rubber-Cement Composites for Additive Manufacturing:
     Physical, Mechanical and Thermo-Acoustic Characterization
368. Napolitano Rosanna, Menna Costantino, Asprone Domenico, Giudice Lorenzo (2020-07)
     Mechanical Characterization of Layer-by-Layer Interface in Concrete Elements Obtained by Additive Manufacturing
369. Suntharalingam Thadshajini, Nagaratnam Brabha, Poologanathan Keerthan, Hackney Phil et al. (2020-07)
     Effect of Polypropylene-Fibers on the Mechanical Properties of Extrudable Cementitious Material
370. Jacquet Yohan, Picandet Vincent, Rangeard Damien, Perrot Arnaud (2020-07)
     Gravity-Driven Tests to Assess Mechanical Properties of Printable Cement-Based Materials at Fresh State
371. Cho Seung, Kruger Jacques, Bester Frederick, Heever Marchant et al. (2020-07)
     A Compendious Rheo-Mechanical Test for Printability-Assessment of 3D Printable Concrete
372. Maitenaz Sébastien, Mesnil Romain, Onfroy Paul, Metge Nicolas et al. (2020-07)
     Sustainable Reinforced Concrete Beams:
     Mechanical Optimization and 3D Printed Formwork
373. Shahzad Qamar, Wang Xujiang, Wang Wenlong, Wan Yi et al. (2020-06)
     Coordinated Adjustment and Optimization of Setting-Time, Flowability, and Mechanical Strength for Construction 3D Printing Material Derived from Solid Waste
374. Manikandan Karthick, Jiang Xuepeng, Singh Amit, Li Beiwen et al. (2020-06)
     Effects of Nozzle Geometries on 3D Printing of Clay Constructs:
     Quantifying Contour-Deviation and Mechanical Properties
375. Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2020-05)
     Mechanical Behavior of Printed Strain-Hardening Cementitious Composites
376. Baz Bilal, Aouad Georges, Leblond Philippe, Mansouri Omar et al. (2020-05)
     Mechanical Assessment of Concrete:
     Steel Bonding in 3D Printed Elements
377. Falliano Devid, Domenico Dario, Ricciardi Giuseppe, Gugliandolo Ernesto (2020-04)
     3D Printable Lightweight Foamed Concrete and Comparison with Classical Foamed Concrete in Terms of Fresh State Properties and Mechanical Strength
378. Chougan Mehdi, Ghaffar Seyed, Jahanzat Mohammad, Albar Abdulrahman et al. (2020-04)
     The Influence of Nano-Additives in Strengthening Mechanical Performance of 3D Printed Multi-Binder Geopolymer Composites
379. Pham Luong, Tran Jonathan, Sanjayan Jay (2020-04)
     Steel-Fiber-Reinforced 3D Printed Concrete:
     Influence of Fiber Sizes on Mechanical Performance
380. Ding Tao, Xiao Jianzhuang, Qin Fei, Duan Zhenhua (2020-03)
     Mechanical Behavior of 3D Printed Mortar with Recycled Sand at Early-Ages
381. Wang Li, Jiang Hailong, Li Zhijian, Ma Guowei (2020-02)
     Mechanical Behaviors of 3D Printed Lightweight Concrete Structure with Hollow Section
382. Li Zhijian, Wang Li, Ma Guowei (2020-01)
     Mechanical Improvement of Continuous Steel-Micro-Cable-Reinforced Geopolymer Composites for 3D Printing Subjected to Different Loading Conditions
383. Ma Guowei, Li Yanfeng, Wang Li, Zhang Junfei et al. (2020-01)
     Real-Time Quantification of Fresh and Hardened Mechanical Property for 3D Printing Material by Intellectualization with Piezoelectric Transducers
384. Lee Hojae, Kim Jang-Ho, Moon Jae-Heum, Kim Won-Woo et al. (2019-12)
     Evaluation of the Mechanical Properties of a 3D Printed Mortar
385. Pham Luong, Lin Xiaoshan, Gravina R., Tran Jonathan (2019-12)
     Influence of PVA- and PP-Fibers at Different Volume Fractions on Mechanical Properties of 3D Printed Concrete
386. Shakor Pshtiwan, Nejadi Shami, Paul Gavin (2019-11)
     Investigation into the Effect of Delays Between Printed Layers on the Mechanical Strength of Inkjet 3DP Mortar
387. Korniejenko Kinga, Łach Michał, Chou S., Lin Wei-Ting et al. (2019-11)
     A Comparative Study of Mechanical Properties of Fly-Ash-Based Geopolymer Made by Casted and 3D Printing Methods
388. Rahul Attupurathu, Santhanam Manu, Meena Hitesh, Ghani Zimam (2019-08)
     Mechanical Characterization of 3D Printable Concrete
389. Cho Seung, Kruger Jacques, Zeranka Stephan, Rooyen Algurnon et al. (2019-06)
     Mechanical Evaluation of 3D Printable Nano-Silica Incorporated Fiber-Reinforced Lightweight Foam-Concrete
390. Xu Yading, Šavija Branko (2019-06)
     Development of Strain-Hardening Cementitious Composite (SHCC) Reinforced with 3D Printed Polymeric Reinforcement:
     Mechanical Properties
391. Shakor Pshtiwan, Nejadi Shami, Paul Gavin (2019-05)
     An Investigation into the Effects of Deposition-Orientation of Material on the Mechanical Behavior of the Cementitious Powder and Gypsum-Powder in Inkjet 3D Printing
392. Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud (2019-04)
     Mechanical Behavior of 3D Printed Cement Materials
393. Ting Guan, Tay Yi, Qian Ye, Tan Ming (2019-03)
     Utilization of Recycled Glass for 3D Concrete Printing:
     Rheological and Mechanical Properties
394. Cao Xiangpeng, Li Zongjin (2019-02)
     Factors Influencing the Mechanical Properties of Three-Dimensional Printed Products From Magnesium-Potassium-Phosphate Cement Material
395. Feng Peng, Meng Xinmiao, Chen Jian-Fei, Ye Lieping (2019-02)
     Mechanical Properties of Structures 3D Printed with Cementitious Powders
396. Panda Biranchi, Lim Jian, Tan Ming (2019-02)
     Mechanical Properties and Deformation Behavior of Early-Age Concrete in the Context of Digital Construction
397. Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
     Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing
398. Ma Guowei, Li Zhijian, Wang Li, Wang Fang et al. (2019-01)
     Mechanical Anisotropy of Aligned Fiber-Reinforced Composite for Extrusion-Based 3D Printing
399. Chen Mingxu, Guo Xiangyang, Zheng Yan, Li Laibo et al. (2018-11)
     Effect of Tartaric Acid on the Printable, Rheological and Mechanical Properties of 3D Printing Sulphoaluminate Cement-Paste
400. Chen Mingxu, Li Laibo, Zheng Yan, Zhao Piqi et al. (2018-09)
     Rheological and Mechanical Properties of Admixtures-Modified 3D Printing Sulphoaluminate Cementitious Materials
401. Falliano Devid, Gugliandolo Ernesto, Domenico Dario, Ricciardi Giuseppe (2018-09)
     Experimental Investigation on the Mechanical Strength and Thermal Conductivity of Extrudable Foamed Concrete and Preliminary Views on Its Potential Application in 3D Printed Multilayer Insulating Panels
402. Yu Jing, Leung Christopher (2018-09)
     Impact of 3D Printing-Direction on Mechanical Performance of Strain-Hardening Cementitious Composite (SHCC)
403. Hu Chang’an, Du Wenbo (2018-08)
     Research on the Method for Improving Mechanical Properties of Sand-Mold-Based on 3D Printing Process
404. Al-Qutaifi Sarah, Nazari Ali, Bagheri Ali (2018-07)
     Mechanical Properties of Layered Geopolymer Structures Applicable in Concrete 3D Printing
405. Ma Guowei, Zhang Junfei, Wang Li, Li Zhijian et al. (2018-06)
     Mechanical Characterization of 3D Printed Anisotropic Cementitious Material by the Electromechanical Transducer
406. Mechtcherine Viktor, Grafe Jasmin, Nerella Venkatesh, Spaniol Erik et al. (2018-05)
     3D Printed Steel-Reinforcement for Digital Concrete Construction:
     Manufacture, Mechanical Properties and Bond Behavior
407. Lim Jian, Weng Yiwei, Li Mingyang (2018-05)
     Effect of Fiber-Reinforced Polymer on Mechanical Performance of 3D Printed Cementitious Material
408. Annapareddy Ashokreddy, Panda Biranchi, Ting Guan, Li Mingyang et al. (2018-05)
     Flow And Mechanical Properties of 3D Printed Cementitious Material With Recycled Glass-Aggregates
409. Panda Biranchi, Mohamed Nisar, Tan Ming (2018-04)
     Effect of 3D Printing on Mechanical Properties of Fly Ash-Based Inorganic Geopolymer
410. Wolfs Robert, Bos Freek, Salet Theo (2018-02)
     Early-Age Mechanical Behaviour of 3D Printed Concrete:
     Numerical Modelling and Experimental Testing
411. Suiker Akke (2018-01)
     Mechanical Performance of Wall Structures in 3D Printing Processes:
     Theory, Design Tools and Experiments
412. Panda Biranchi, Paul Suvash, Tan Ming (2017-07)
     Anisotropic Mechanical Performance of 3D Printed Fiber-Reinforced Sustainable Construction-Material
413. Marchment Taylor, Xia Ming, Dodd Elise, Sanjayan Jay et al. (2017-07)
     Effect of Delay-Time on the Mechanical Properties of Extrusion-Based 3D Printed Concrete
414. Shakor Pshtiwan, Sanjayan Jay, Nazari Ali, Nejadi Shami (2017-02)
     Modified 3D Printed Powder to Cement-Based Material and Mechanical Properties of Cement Scaffold Used in 3D Printing
415. Feng Peng, Meng Xinmiao, Chen Jian-Fei, Ye Lieping (2015-06)
     Mechanical Properties of Structures 3D Printed with Cementitious Powders
416. Takashima Hiroyuki, Miyagai Kiyotaka, Hashida Toshiyuki, Li Victor (2002-09)
     A Design Approach for the Mechanical Properties of Polypropylene-Discontinuous-Fiber-Reinforced Cementitious Composites by Extrusion-Molding