Skip to content

#performance

Keywords by Co - Occurrence

  1. Nguyen Vuong, Jie Cheah, Lao Junying, Huanyu Zhao et al. (2026-01)
    Performance of Lightweight, Reinforced, and Assemblable 3D-Printed Concrete Columns with Low-Carbon Engineered Cementitious Composites
  2. Teixeira João, Jesus Manuel, Rangel Bárbara, Alves Jorge et al. (2026-01)
    Evaluation of Printing Performance of Cementitious Pastes with Alternative Powders
  3. Kiyani Muhammad, Kamal Muhammad, Hussain Syed, Emaan Rajja et al. (2026-01)
    A Novel Arch Infill for 3D Concrete Printed Beams:
    A Comparative Study of Flexural Performance Against Truss and Solid Designs
  4. Zhang Xin, Xu Xinglong, Liu Xianda, Sun Junbo et al. (2026-01)
    Enhancing Electromagnetic Wave Absorption in 3D-Printed Concrete with Superabsorbent Polymers for High Performance
  5. Tarhan Yeşim, Tarhan İsmail, Perrot Arnaud (2026-01)
    Improving Bond Performance of 3D-Printable Earth-Based Mortar Reinforced with Jute Fibers
  6. Liu Zhenbang, Li Mingyang, Wang Sizhe, Deng North et al. (2026-01)
    Investigation on Bond-Slip Performance of Steel Rebar Embedded in Concrete Confined by 3D Concrete Printing Formwork
  7. Valdez-Cano R., González-López J., De-Los-Santos E., Mendoza‐Rangel J. et al. (2026-01)
    Alternative Silica Aerogel Mortar for Improving Energy Efficiency, Thermal Comfort, and Environmental Performance in Residential Buildings Under Hot-Dry Climates Using 3D Additive Manufacturing
  8. Sheng Zhaoliang, Ding Shaolong, Zhu Binrong, Cai Jingming et al. (2026-01)
    Bonding Performance of Toothed Interfaces in 3D Printed Alkali-Activated Concrete
  9. Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2026-01)
    Enhancing Fiber Alignment and Tensile Properties of 3D-Printed Ultra-High Performance Strain-Hardening Cementitious Composites by Nozzle Channel Design
  10. Aroso Francisca, Reis Rui, Brandão Filipe, Figueiredo Bruno et al. (2026-01)
    Assessing Orthotropic Mechanical Performance and Digital Twin of Robotic 3D Printed Cementitious Mortars with Fibers and Metal Reinforcements
  11. Alvarez Eduardo, Curth Alexander, Mueller Caitlin, Norford Leslie (2026-01)
    Enhancing the Dynamic Thermal Performance of Wall Components Through Shape Optimization:
    Method and Application to Extruded Blocks and 3D-Printed Walls
  12. Zhang Xiaoyue, Chen Zhengren, Zhou Xinting, Li Zheng et al. (2026-01)
    Experimental Investigation on the Mechanical Performance of 3D-Printed Concrete-Glued Laminated Timber Composite Beams
  13. Murali Gunasekaran, Kravchenko Ekaterina, Yuvaraj Divya, Avudaiappan Siva (2025-12)
    Next-Generation Green Construction:
    3D-Printed Geopolymer Concrete with Optimized Rheology, Mechanical Performance, and Environmental Efficiency
  14. Huang Bo, Liu Chang, Sun Junbo, Wang Yufei et al. (2025-12)
    Optimized Synergy of Fiberglass Mesh and PP Fibers-Modified Structural Adhesive for Enhanced Mechanical and Microstructural Performance in 3D Printing Concrete
  15. Nguyen Vuong, Jie Cheah, Zhang Y., Wong Hong (2025-12)
    Effect of Infill Architecture on Structural Performance and Sustainability of 3D-Printed Reinforced Concrete Columns
  16. Basith Mydeen Pitchai Mohamed Abdul (2025-12)
    Polymer-Enhanced Composites for 3D Concrete Printing:
    A Review of Materials, Processes, and Performance
  17. Li Liqing, Shi Zhenkun, Wang Lei, Sui Yi et al. (2025-12)
    3D Printing of Simulated Lunar Soil Geopolymer and Analysis of Its Weak Surface and Anisotropic Performance
  18. Fatima Warsi, Syed Bustan, Panda Biranchi, Biswas Pankaj (2025-12)
    Numerical Evaluation of the Seismic Performance of Self-Centering 3D Printed Concrete Wall
  19. Cárdenas Valeria, Vargas Juan, Fantucci Stefano (2025-12)
    Topological Optimization and Material Exploration for Improving the Thermal Performance of 3D Printed Prefabricated Wall Components
  20. Latorraca Tássia, Rangel Bárbara, Guimarães Ana (2025-12)
    Optimizing 3D-Printed Concrete Panels’ Thermal Performance with Materials, Metrics, and Generative Design
  21. Feliciano Renzo, Barrera Natalia, Lukyanenko Artyom, Rangel Bárbara et al. (2025-12)
    Sustainable Geometries:
    A Comparative Analysis of Thermal Performance in Uninsulated 3D Printed Concrete Wall Topologies
  22. Akgümüş Fatih, Şahin Hatice, İsafça Kaya Tuğçe, Mardani Ali (2025-12)
    Combined Effect of Recycled Tire Steel Fiber and Blast Furnace Slag on the Mechanical Performance of 3D Printable Concrete
  23. Wang Jinjin, Li Shouzhen, Qiu Jin, Chen Cheng et al. (2025-12)
    Experimental Investigation on Thermal Performance of 3D Printed Concrete Elements Subjected to Radiant Heating
  24. Taborda-Llano Isabella, Hoyos-Montilla Ary, Asensio Eloy, Guerrero Ana et al. (2025-12)
    Influence of the Construction Process Parameters on the Mechanical Performance and Durability of 3D Printed Concrete:
    A Systematic Review
  25. Shilar Fatheali, Shilar Mubarakali (2025-12)
    Performance-Based Analysis of 3D Printed Geopolymers Relating Durability, Microstructure, and Life Cycle Assessment
  26. Tong Zhongling, Guan Qingtao, Elabbasy Ahmed, Ateah Ali et al. (2025-12)
    Empowering 3D Printed Concrete:
    Discovering the Impact of Steel Fiber Reinforcement on Mechanical Performance
  27. Wen Kuo-Wei, Su Yen-Fang, Mo Kim, Hung Chung-Chan (2025-12)
    Time-Dependent Rheology, Green Strength, and Buildability of 3D-Printed Ultra-High Performance Concrete Incorporating Various Fiber Types and Contents
  28. Nermend Loran, Skibicki Szymon, Techman Mateusz, Federowicz Karol et al. (2025-12)
    Electrical Resistivity and Elevated Temperature Performance of 3D Printed Concrete Containing Nanosized Radiation Shielding Admixtures
  29. Sifan Mohamed, Upasiri Irindu, Poologanathan Keerthan, Popo-Ola Sunday et al. (2025-12)
    Fire Performance and Design of LSF Wall Panels with 3D Printed Concrete and Steel Lipped Channel Sections
  30. Iqbal Imtiaz, Kasim Tala, Inqiad Waleed, Besklubova Svetlana et al. (2025-11)
    Effect of Metakaolin and Biochar Addition on the Performance of 3D Concrete Printing:
    A Meta-Analysis Approach
  31. Si Wen, Khan Mehran, McNally Ciaran (2025-11)
    Rheological Optimization and Mechanical Performance Assessment of High-Volume GGBS-Silica Fume Mortars for 3D Printing
  32. Wang Zherui, Teitelbaum E., Akbarzadeh Masoud, Aviv D. (2025-11)
    Experimental Assessment on Thermal Mass Performance of Structurally Optimized, 3D-Printed Concrete Floor Element for Carbon Emission Reduction
  33. Saravanan Pradeep, Ramaswamy Ananth (2025-11)
    Modelling Buildability Performance of 3D Printable Cementitious Materials Using Chemo-Mechanical Model
  34. Sikora Paweł, Federowicz Karol, Skibicki Szymon, Techman Mateusz et al. (2025-11)
    Demonstration of 3D-Printed Concrete Containing Fine Recycled Concrete Aggregates and Recycled Concrete Powder:
    Rheology, Early-Age, Shrinkage, Mechanical, and Durability Performance.
  35. Davar Saeed, Ma Zhanguo (2025-11)
    Improving the Mechanical Performance of 3D-Printed UHPFRC with Thermally Modified Carbon Fibers
  36. Hasan Md, Xu Jie, Uddin Md (2025-11)
    A Critical Review of 3D Printed Fiber-Based Geopolymer Concrete:
    Fresh Properties, Mechanical Performance, and Current Limitations
  37. Zhang Jiao-Long, Yuan Yong, Fatoyinbo Imoleayo, Zhou Lujie et al. (2025-11)
    3D-Printable Mortars Incorporating Municipal Solid Waste Incineration Bottom Ash:
    Linking Hydration to Extrudability and Mechanical Performance
  38. Zhu Binrong, Liu Xuhua, Wei Yang, Pan Jinlong (2025-11)
    Predicting the Tensile Performance of 3D-Printed PE Fiber-Reinforced ECC Based on Micromechanics Model
  39. Bates Rhys, Aslani Farhad (2025-11)
    Performance of 3D-Printed Concrete Columns with GFRP Rebars Under Axial Compression
  40. Zhang Hui, Wu Jie, Huang Bo-Tao, Yu Rena et al. (2025-11)
    Cross-Scale Mechanisms of Anisotropy in 3D-Printed Ultra-High-Performance Concrete
  41. Chen Wenguang, Yu Jie, Ye Junhong, Yu Jiangtao et al. (2025-11)
    3D Printed High-Performance Fiber-Reinforced Cementitious Composites:
    Fresh, Mechanical, and Microstructural Properties
  42. Bradshaw James, Balasubramanian Swathi, Si Wen, Khan Mehran et al. (2025-10)
    Towards Greener 3D Printing:
    A Performance Evaluation of Silica Fume-Modified Low-Carbon Concrete
  43. Valeri Manuela, Sangiorgio Valentino, Cantagallo Christina (2025-10)
    From Traditional Materials to Geopolymers:
    History, Performance, Sustainability and 3D Printing Applications
  44. Marco Giancarlo, Lombardi Davide (2025-10)
    A Streamlined Decentralised Workflow for Obtaining Specific Mechanical Performance and Grade of 3DPC:
    Towards the Standardisation and Industrialisation of 3DCP
  45. Cheng Zhangqi, Zhou Lu, Jia Xiangxi, Liu Renlong (2025-10)
    Experimental Study on Crack Development and Fracture Performance of 3D Printed Green Engineered Cementitious Composites
  46. Das Jyotish, Pratama M., Nematollahi Behzad, Guadagnini Maurizio (2025-10)
    Durability Performance of 3D-Printed Ultra-High Strength Concrete Incorporating Corrosion Inhibitor
  47. Ding Tao, Zhu Ruitao, Yu Kequan, Xiao Jianzhuang (2025-10)
    Direct Tensile Behavior of Three-Dimensional-Printable Steel Fiber-Reinforced Ultrahigh Performance Concrete
  48. Raza Ali, Yuan Chengfang (2025-10)
    Degradation Mechanisms and Microstructural Performance of 3D-Printed Engineered Cementitious Composites with Yellow River Sand Under Chloride Ion Wet-Dry Cycles
  49. Ali Muhammad, Qian Hui, Umar Muhammad, Fenglin Liu et al. (2025-10)
    Rheological, Mechanical, and Self-Recovery Performance of 3D-Printed ECC Reinforced with Shape Memory Alloy Fibers
  50. Marrero-Rosa Raul, Gomaa Shady, Irizarry Elmer, Ahmed Hassan et al. (2025-10)
    Additive Manufacturing of Ultra-High-Performance Concrete:
    From Mechanical Characterization to Large-Scale Application
  51. Wei Jingjie, Khayat Kamal (2025-10)
    Effect of Chemical Additives on Performance of Low-Clinker 3D Printing Mortar
  52. Santhanam Manu (2025-10)
    Multi-Scale Assessment of the Structural Performance of 3D Printed Concrete
  53. Lale Erol, Ayhan Bahar, Ahmed Ayesha, Irizarry Elmer et al. (2025-10)
    Computational Simulations Fresh-to-Solid Transition for Additive Manufacturing of Ultra-High-Performance Fiber Reinforced Concrete
  54. Li Haodao, Khayat Kamal (2025-10)
    Performance-Based Design of 3D Printable Cement Composite Using Locally Available Materials
  55. Castro-Chincho Ana, Ivorra-Martinez Juan, Perejón Antonio, Sánchez-Jiménez Pedro et al. (2025-10)
    3D-Printed Mineral Limestone Structures for Calcium Looping Thermochemical Energy Storage:
    Reactivity and Performance Across Cycles
  56. Seepim Sirakan, Dhanasekara Chamil, Tanapornraweekit Ganchai, Tangtermsirikul Somnuk et al. (2025-10)
    Effects of Printing Interval Time on the Structural Performance of 3D-Printed Beams Under Four-Point Bending Loads
  57. Bu Dechao, Zhang Jiawei, Wu Gan, Xia Zixu et al. (2025-09)
    Impact Performance of 3D Printed ECC Inspired by Biological Bouligand Structure
  58. Philip Nivin, Jędrzejewska Agnieszka, Mathew Ashitta, Uthuppan Susan (2025-09)
    Steel Fiber Reinforcement for Improved Structural Performance and Durability of 3D Printed Mortar in Marine Environments
  59. Sun Yan, Mudasir Maryam (2025-09)
    3D Printing Performance of Strain-Hardening Cementitious Composites with Different UHMWPE Fibers in Correlation with Rheology
  60. Safdar Gardezi Syed, Tanyildizi Harun, Haroglu Hasan, Coskun Ahmet (2025-09)
    Acid Attack Performance of 3D Printing Nano-ZnO Modified Geopolymer Mortar
  61. Anwar Muhammad, Zhu Xingyi, Zhang Yating, Wang Jiakang et al. (2025-09)
    Synergistic Effects of Microwave Curing Regimes on Early, Mid, and Long-Term Strengths and Microstructural Performance of Fly Ash-Slag Based 3D-Printed Geopolymers
  62. Tarhan Yeşim, Atalay Berrin (2025-09)
    Phosphogypsum and Borogypsum as Additives for Sustainable and High-Performance 3D-Printable Concrete
  63. Elhag Ahmed, Mabrouk Abdelkader, Ghazouani Nejib, Nasir Umara (2025-09)
    Advances in Sustainable 3D-Printed Geopolymer Concrete:
    Materials, Performance, and Environmental Impact in Next Generation Green Construction
  64. Ding Tao, Zhu Ruitao, Huang Zhangshuo (2025-09)
    Experimental Study on the Steel Fiber Orientational Distribution of Extrusion-Based 3D-Printed Ultra High-Performance Concrete
  65. Alonso-Cañon Sara, Blanco-Fernandez Elena, Cuesta-Astorga Eva, Indacoechea-Vega Irune et al. (2025-09)
    Selection of the Best 3D Printing High-Performance Mortars Using Multi-Criteria Analysis
  66. Li Leo, Fei Zuojie, Jiao Chujie, Luo Tao et al. (2025-09)
    Bauxite Residue-Based 3D Printing Mortar:
    Enhancing Performance and Sustainability Through the Paste Replacement Approach
  67. Xing Wenjing, Li Zhengrong (2025-09)
    Quantifying the Heterogeneous Anisotropic Thermal Performance of Extrusion-Based 3D Printed Structures:
    A Multiscale Computational Approach
  68. Leong Wai (2025-09)
    Structural Optimization and Performance Evaluation of Spain's 3D-Printed Concrete Bridges Using AI-Based Design Approaches
  69. Du Guoqiang, Deng Xiaowei, Qian Ye (2025-09)
    Biomimetic 3D Printed Herringbone-Bouligand Cementitious Composites for Ultra-High Impact Performance
  70. Chen Wenguang, Liang Long, Ye Junhong, Liu Lingfei et al. (2025-09)
    Machine Learning-Enabled Performance-Based Design of Three-Dimensional Printed Engineered Cementitious Composites
  71. Chortis Alexandros, Gkountas Charalampos, Melidis Lazaros, Katakalos Konstantinos (2025-09)
    Seismic Performance Evaluation of 3D-Printed Concrete Walls Through Numerical Methods
  72. Marco Giancarlo, Cheung Lok (2025-09)
    Multimodal Large Language Models for Adaptive 3D Concrete Printing:
    Real-Time Control of Materials and Settings According to Performance Requirements and Environmental Conditions
  73. Syed Sajid, Abid Khasim, Khan Majid (2025-09)
    An Interpretable Machine Learning Approach for Predicting Reinforcement Bond Performance in 3D Concrete Printing
  74. Bai Gang, Wang Li, Li Zhijian, Qu Yao et al. (2025-09)
    Integrating Prestress into 3D Printed Ultra-High Performance Concrete Composite Beams for Superior Flexural Performance
  75. Barbhuiya Salim, Das Bibhuti, Adak Dibyendu (2025-09)
    Key Variables Influencing the Performance of 3D Printed Concrete:
    A Comprehensive Analysis
  76. Shukla Bishnu, Bharti Gaurav, Parashar Bhupender, Sharma Pushpendra et al. (2025-09)
    Variables Influencing the Performance of 3D Concrete Printing for Sustainable Construction:
    Current Status and Future Prospects
  77. Zhang Jiawei, Sun Yuanfeng, Bu Dechao, Lu Cong et al. (2025-08)
    Rheology-Tailored 3DP-UHPC:
    From Enhanced Printability to Impact Performance
  78. Zhang Yifan, Aslani Farhad (2025-08)
    Mechanical and Ultrasonic Pulse Velocity Performance of 3D Printed Rubberised Cementitious Composites Reinforced with PVA Fibers
  79. Murtaza Ghulam, Baldinelli Giorgio (2025-08)
    Revolutionizing Architecture:
    3D Printing in Large Construction Industry and Strategic Innovations for Enhanced Performance
  80. Li Shiping, Sun Yan, Qian Ye, Chen Wujun et al. (2025-08)
    Bio-Inspired Bouligand Architectures for Enhanced Flexural Performance in 3D-Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
  81. Mercimek Ömer, Şahin Oğuzhan, Çelik Alper, Ozkan Ekinci Mehmet et al. (2025-08)
    Structural Performance of Pre-Fabricated 3D Printed Concrete Walls:
    Effect of Cold Joint, Axial Load and Load Type
  82. Yao Weijing, Gao Yangyunzhi, Huang Xin, Du Hongjian (2025-08)
    Influence of Printing Speed and Extrusion Speed on the Performance and Pore Structures of 3D Printed Mortar
  83. Dong Enlai, Jia Zijian, Rao Suduan, Jia Lutao et al. (2025-08)
    Fiber Alignment Mechanism in 3D-Printed Ultra-High Performance Concrete Based on Fluid Dynamics Theory
  84. Lu Qianyang, Mei Song, Ateah Ali, Alsubeai Ali et al. (2025-08)
    Investigating the Strength Performance of 3D Printed Fiber-Reinforced Concrete Using Applicable Predictive Models
  85. Xiahou Xiaer, Ding Xingyuan, Yu Ke-Ke, Lu Cong (2025-08)
    From Waste to Strength:
    Sustainable Valorization of Modified Recycled PET Fibers for Rheological Control and Performance Enhancement in 3D Printed Concrete
  86. Li Nan, Deng Yongjie, Li Weihong, Li Lingyu et al. (2025-08)
    Performance of Active-Magnesia-Based Magnesium Phosphate Cement and Application of Rapid-Solidification 3D Printing Technology
  87. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Manalo Allan, Sanjayan Jay (2025-07)
    Rheological, Mechanical and Fire Resistance Performance of Waste Glass Activated Geopolymers for Concrete 3D Printing
  88. Wang Jiakang, Anwar Muhammad, Zhu Xingyi, Zhang Yating et al. (2025-07)
    Robust Optimization of Formulation Ratios for the Mechanical, Microstructural and Printing Performance of Cost-Effective 3D Printing Geopolymer
  89. Liu Shan, Hao Yifei (2025-07)
    Designing Sprayable EGC from Constructability to Mechanical Performance
  90. Ingle Vaibhav, Prem Prabhat (2025-07)
    Acoustic Emission Examination of 3D Printed Ultra-High Performance Concrete with and Without Coarse Aggregate Under Fresh and Hardened States
  91. Dong Liang, Wu Chengqing, Liu Zhongxian, Wu Pengtao et al. (2025-07)
    Chloride Transport Anisotropy and Interfacial Degradation in 3D-Printed Ultra-High-Performance Concrete:
    Multi-Scale Evaluation and Engineering Implications
  92. Wang Tongcai, Gu Guangshuai, Zhang Rihan, Cui Qianshun et al. (2025-07)
    Additive Manufacturing of Lunar Regolith via Resin-Based Binder and Material Extrusion Method for High-Performance In-Situ Manufacturing on the Moon
  93. Kaur Zinnia, Goyal Shweta, Kwatra Naveen, Bera Tarun (2025-07)
    Pore Structure Analysis and Durability Performance of Sustainable 3D Printed Concrete Incorporating Fly Ash and Limestone Calcined Clay Based Binders
  94. Mahmoodi Obaid, Siad Hocine, Lachemi Mohamed, Şahmaran Mustafa (2025-07)
    Recent Advances in CDW-Based Geopolymers:
    A Review of Mechanical Performance, Structural Application, 3D Printing, Durability and Sustainability
  95. Yang Jie, Xu Ke, He Haijie (2025-07)
    Materials, Performance Studies, and Application Progress of Fiber-Reinforced 3D-Printed Concrete
  96. Popli Siddharth, Valikhah Fatemeh, Zandi Lak Erfan, Das Sreekanta (2025-07)
    Mechanical and Durability Performance of 3D-Printed Concrete with Coarse Aggregates and Cold Joints
  97. Du Shizhao, Kang Chunxia, Du Xiuli (2025-06)
    Fatigue Performance of 3D Printed Reusable Concrete Slabs for Temporary Pavements
  98. Li Qiyan, Su Anshuang, Gao Xiaojian (2025-06)
    Improvement of Interlayer Performance of 3D Printable Magnesium Oxysulfate Cement-Based Materials by Carbonation Curing
  99. Alnemrawi Bara'a, Rousan Rajai, Abdalla Khairedin, Lagaros Nikos (2025-06)
    Evaluating the Structural Performance of 3D Printed FRCC Beams with Anchoring Reinforcement:
    Material, Geometry, and Loading Perspectives
  100. Cui Weijiu, Ji Dongsheng, Shen Liang, Su Shiyong et al. (2025-06)
    A Neural Network-Based Model for Assessing 3D Printable Concrete Performance in Robotic Fabrication
  101. Saad E., Correa David (2025-06)
    Thermal Performance Improvement of Brick Design via 3D Printing
  102. Hanifa Mohamad, Mendonça Paulo, Figueiredo Bruno, Mahdy Deena (2025-06)
    Experimental Study on the Thermal Performance of 3D-Printed Earthen Wall Segment with Optimized Infill Pattern
  103. Rajeev Pathmanathan, Kopitha Kirushnapillai, Sanjayan Jay (2025-06)
    Carbonated Water and MgO for Improved Performance of 3D Concrete Printing.
  104. Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2025-06)
    Effects of Nozzle Thickness on the Mechanical Properties of 3D Printable Ultra-High Performance Strain-Hardening Cementitious Composites (UHP-SHCC)
  105. Lyu Xin, Ayough Pouria, Nawaz Waleed, Elchalakani Mohamed (2025-06)
    Development and Characterization of Printable Rubberised Ultra-High-Performance Concrete
  106. Mostert Jean-Pierre, Kruger Jacques (2025-06)
    Improving Shear and Flexural Performance of Macroscale 3D Printed Concrete Beams Through Filament Interlocking
  107. Yao Jiaxu, Luo Jie, Qiu Minghong, Nagai Kohei (2025-06)
    Mesoscale Modeling of Anisotropic Compressive Behavior and Pull-Out Performance of 3D Printed Concrete with Steel Bars Using 3D RBSM
  108. Li Shuai, Liu Junli, Cheng Chi-Tsun, Xuan Hung et al. (2025-06)
    Design and Performance of 3D Printed Bouligand Steel Fiber-Reinforced Cementitious Composite Curved Beams
  109. Gupta Souradeep, Sahana C., Soda Prabhath, Dwivedi Ashutosh (2025-06)
    Development of Carbon Sequestering 3D-Printable Stabilized Earth Materials:
    Investigation into Engineering Performance and Resistance Against Acid Attack
  110. Rosa Marco, Brito Diogo, Vilas-Boas Rodrigo, Sousa José (2025-06)
    3DCP vs Conventional Construction:
    Comparative Analysis of Energy Performance and Embodied Carbon
  111. Pei Qiang, Zhong Yingzhu, Wang Shuai, Zhang Luxi et al. (2025-06)
    Interlayer Bonding Shear Performance and Constitutive Model of 3DPC with Different Fine Aggregate Gradations
  112. Trung Hieu Nguyen, Minh Trieu Nguyen, Dang Tri, Thinh Nguyen (2025-05)
    Advanced Sliding Mode Control Strategy for High-Performance 3D Concrete Printing
  113. Zhu Xingyi, Anwar Muhammad, Deng Guomin, Wang Xiaoming et al. (2025-05)
    Effect of Microwave Heating Under Varying Exposure Conditions on Rheological Properties, Interlayer Bond and Buildability Performance of 3D-Printed Geopolymer
  114. Rückrich Stefanie, Austern Guy, Denay Ofer, Seiwert Paul et al. (2025-05)
    3D-Printed Earth-Fiber Envelopes:
    Optimization of Thermal Performance and Industrial Applicability
  115. Raza Ali, Junjie Zhang, Fan Jiahui, Umar Muhammad et al. (2025-05)
    Comprehensive Study on the Microstructural and Mechanical Performance of 3D-Printed Engineered Cementitious Composites with Yellow River Sand Integration
  116. Cai Lixiong, Chen Feida, Xie Dingkun, Ye Keming (2025-05)
    Time-Varying Work Performance of Cementitious 3D Printing Mortar:
    Effect of SAC, H-PC and HPMC
  117. Hiremath Shivashankarayya, Mathapati Gururaj, Chiniwar Dundesh, Vishwanatha H. (2025-05)
    Performance Evaluation of Cementitious Composites by Designing an Extrusion System for Construction 3D Printing
  118. Yamamoto Yujin, Kinomura Koji, Murata Satoshi, Asaue Hisafumi et al. (2025-05)
    Seismic Performance of RC Column Surrounded by 3D Printed Concrete Permanent Formwork with Short Fiber
  119. Sarıkaya M., Benam Shaghayegh, Yılmaz Taner, Erkmen Bülent et al. (2025-05)
    Seismic Performance Assessment of 3D-Printed Concrete Structures
  120. Tarhan Yeşim, Tarhan İsmail, Perrot Arnaud (2025-05)
    Flexural Performance of Glass Fiber Textile Reinforced 3D Printed Concrete
  121. Salifu N., Bassuoni Mohamed, Guven Gursans (2025-05)
    Performance Evaluation of Limestone-Blended Cement and Cellulose Nanomaterials in 3D Concrete Printing
  122. Zhu Wenxuan, Liu Chao, Zhang Yu, Zhang Yunsheng et al. (2025-05)
    Rheological Performance Regulation and Material Optimization of Manufactured Sand Concrete in 3D Printing
  123. Yang Shutong, Chen Zhengyuan, Lan Tian, Yang Tiange (2025-05)
    Quantitative Evaluation for Fracture Properties of 3D Printed Ultra-High-Performance Concrete Loaded in Different Directions
  124. Zhou Zhuang, Shi Xinyu, Zhou Haining, Liang Yuan et al. (2025-05)
    Research on 3DPC Construction Method for Structural High-Performance Component Generation
  125. Jaji Mustapha, Babafemi Adewumi, Zijl Gideon (2025-05)
    Mechanical Performance of Extrusion-Based Two-Part 3D-Printed Geopolymer Concrete:
    A Review of Advances in Laboratory and Real-Scale Construction Projects
  126. Chen Zhaohui, Yue Ziyi, Gerong Wangdui, Wang Zhenyue et al. (2025-05)
    Effect of Orthotropy and Printing Patterns on the Bending Performance of 3D Printed Concrete Grid Components
  127. Lopes Sousa Israel, Liu Han, Alessandro Antonella, Laflamme Simon et al. (2025-05)
    Piezoresistive Performance of 3D Printed Cementitious Composites Doped with Carbon Microfibers
  128. Zahabizadeh Behzad, Pereira João, Pereira Eduardo, Cunha Vítor (2025-05)
    Self-Healing Assessment of Fiber Reinforced Cementitious Mortars Developed for 3D Concrete Printing:
    Recovery of Mechanical Performance and Self-Sealing Capability
  129. Jia Yanhong, Chen Yao, Li Yanchen, Le Huirong (2025-05)
    Impacts of the Rheological Performance on Dynamic Printing of Metakaolin-Based Geopolymer
  130. Liu Xingzi, Xu Jie, Dobrzanski James, Kolawole John et al. (2025-05)
    Factors Affecting the Flexural Performance of Reinforced 3D Printed Concrete Beams
  131. Khanverdi Mohsen, Das Sreekanta (2025-05)
    Performance of Full-Scale 3D-Printed Concrete Walls:
    Effects of Vertical Reinforcements and Window Opening
  132. Mishra Sanjeet, Snehal K., Das B., Chandrasekaran Rajasekaran et al. (2025-05)
    From Printing to Performance:
    A Review on 3D Concrete Printing Processes, Materials, and Life Cycle Assessment
  133. Yang Guojun, Weng Yiwei, Tian Jiefu, Yang Zhenjun (2025-05)
    3D Printing Towards Cost-Effective Design of Composite UHPFRC Beams:
    Effects of Fiber Distribution and Orientation on Flexural Performances and Failure Mode Transition
  134. Hu Xiangcheng, Shazad Qamar, Li Fangyuan (2025-04)
    Influence of the Shear Span Ratio on the Shear Performance of 3D-Printed Concrete Beams Without Web Reinforcement
  135. Hasani Alireza, Besharatian Boshra, Dorafshan Sattar (2025-04)
    Additively Constructed Plain Concrete Pipes:
    Structural Performance and Site Implementation
  136. Hua Hao, Liu Yizhuo, Hovestadt Ludger, He Siyuan et al. (2025-04)
    Digital Nervi:
    Performance‐based Design of Lightweight Isostatic Ribbed Slab with 3D Printed Concrete Formwork
  137. Wang Chaofan, Li Bin, Chen Bing (2025-04)
    Enhancing Printability and Mechanical Performance of 3D Printed Magnesium Phosphate Cement Through Silica Fume Modification:
    Rheological, Microstructural, and Numerical Insights
  138. Ayhan Bahar, Irizarry Elmer, Lale Erol, Yu Ke et al. (2025-04)
    Numerical Simulation of 3D Printed Ultra High-Performance Concrete Using the Lattice Discrete Particle Model
  139. Teng Fei, Ye Junhong, Yu Jie, Weng Yiwei (2025-04)
    Multi-Material Printing to Simultaneously Enhance Interlayer and Flexural Performance in 3D Concrete Printing
  140. Noaimat Yazeed, Chougan Mehdi, Seidy Eslam, Albar Abdulrahman et al. (2025-04)
    Optimizing Limestone Calcined Clay Cement for Enhanced 3D Printing Performance of Low-Carbon Materials
  141. Liu Qiong, Wang Qiming, Sun Chang, Singh Amardeep et al. (2025-04)
    Compressive Performance and Damage Evolution of Concrete Short Columns with Shell-Filling Structure Confined by Continuous Fiber Reinforced 3D Printed Mortar
  142. Shi Ye, Han Li, Wu Pengtao, Dai Kaichao et al. (2025-04)
    Design of 3D Printing Green Ultra-High Performance Concrete Based on Binder System Optimization
  143. Liu Xiongfei, Yang Xiaojie, Sun Yuhang (2025-04)
    Synchronous Construction of Spray-Based 3D Printed Reinforced Concrete Structure:
    Effect of 2.5D Rebar Structure on the Flexural Performance of Slab
  144. Du Guoqiang, Sun Yan, Qian Ye (2025-03)
    In-Plane and Out-of-Plane Compressive Performance of Bio-Inspired 3D Printed Strain-Hardening Cementitious Composite Lattice Structures
  145. Chai Hwa, Shiotani Tomoki (2025-03)
    Opening Letter of RILEM TC QPA:
    Quality and Performance Assurance of Additively Manufactured Cementitious Composites by Advanced Non-Invasive Techniques
  146. Yang Kun, Yuan Jingbo, Wang Yibo, Yang Fan et al. (2025-03)
    Optimization of 3D Printing Nozzle Structure and the Influence of Process Parameters on the Forming Performance of Underwater Concrete
  147. Liu Chao, Liang Zhan, Liu Huawei, Wu Yiwen et al. (2025-03)
    Seismic Performance of 3D Printed Reinforced Concrete Walls:
    Experimental Study and Numerical Simulation
  148. Li Hualong, Shi Ye, Rong Hui, Dai Kaichao (2025-03)
    Effect of Additives on the Performance of 3D-Printing Ultra-High Performance Concrete
  149. Zat Tuani, Schuster Sílvio, Schmitt Duarte Ester, Freitas Daudt Natália et al. (2025-03)
    Rheological Properties of High-Performance Concrete Reinforced with Microfibers and Their Effects on 3D Printing Process
  150. Dey Dhrutiman, Panda Biranchi, Shukla Yash, Rawal Rajan (2025-03)
    A Comprehensive Assessment of Thermal Performance of 3D Printed Concrete Lattice Walls
  151. Wang Qiang, Yang Wenwei, Wang Li, Bai Gang et al. (2025-03)
    Reinforcement Design and Structural Performance for the Topology Optimized 3D Printed Concrete Truss Beams
  152. Yuan Hanquan, Dong Enlai, Jia Zijian, Jia Lutao et al. (2025-03)
    The Influence of Pore Structure and Fiber Orientation on Anisotropic Mechanical Property of 3D Printed Ultra-High-Performance Concrete
  153. Suphunsaeng Kantawich, Prasittisopin Lapyote, Pethrung Sirichai, Pansuk Withit (2025-03)
    Fire Performance Evaluation of 3D-Printed Concrete Walls:
    A Combined Full-Scale and Numerical Modeling Approach
  154. Jiang Youbau, Liu Yan, Zhang Zupan, Gao Pengxiang et al. (2025-03)
    Tensile Performance of Interlayer Interface of Interlocking 3D Printed Concrete with Single Toothlike Nozzle
  155. Zhu Binrong, Zhang Yuhang, Ye Huzi, Wei Yang et al. (2025-03)
    Low-Velocity Impact Performance of Biomimetic 3D Printed Engineered Cementitious Composites Beams
  156. Li Yifan, Chen Shuisheng, Yang Liuhua, Guo Chuan et al. (2025-02)
    Investigation of the Impact of Material Rheology on the Interlayer Bonding Performance of Solid Waste 3D-Printed Components
  157. Mengistu Girum, Nemes Rita (2025-02)
    Evaluating the Performance of Recycled Aggregate Concrete Incorporating 3D-Printed Concrete Waste as Aggregate Using the Rebound Hammer Test
  158. Liu Xiongfei, Li Chuang, Guo Pei, Wang Li et al. (2025-02)
    Spray-Based 3D Printed Tunnel Slag Concrete:
    Evaluation for Printability and Mechanical Performance
  159. Zeng Jun-Jie, Sun Hou-Qi, Deng Run-Bin, Yan Zitong et al. (2025-02)
    Bond Performance Between FRP-Bars and 3D-Printed High-Performance Concrete
  160. Engel Sven, Hegger Josef, Claßen Martin (2025-02)
    Multimodal Automated Fabrication with Concrete:
    Case-Study and Structural Performance of Ribbed CFRP-Reinforced Concrete Ceiling
  161. An Xuehui, Liang Qimin, Li Pengfei, You Wei et al. (2025-02)
    Experimental Assessment on Printing Performance and Mechanical Properties of Underwater Self-Protecting 3D Printing Concrete
  162. Xia Zhenjiang, Geng Jian, Zhou Zhijie, Liu Genjin (2025-01)
    Comparative Analysis of Polypropylene, Basalt, and Steel Fibers in 3D Printed Concrete:
    Effects on Flowability, Printabiliy, Rheology, and Mechanical Performance
  163. Wang Hailong, Shen Wenbin, Sun Xiaoyan, Song Xinlei et al. (2025-01)
    Influences of Particle-Size on the Performance of 3D Printed Coarse Aggregate Concrete:
    Experiment, Microstructure, and Mechanism Analysis
  164. Guan Jingyuan, Wang Li, Wan Qian, Ma Guowei (2025-01)
    Material and Structural Fatigue-Performance of 18m Span Reinforced Arch Structure Manufactured by 3D Printing Concrete as Permanent Formwork
  165. Dong Enlai, Yuan Hanquan, Chen Yu, Jia Lutao et al. (2025-01)
    Printing Large-Size Eggshell-Shaped Elements with Ultra-High-Performance Concrete:
    From Material-Design to Structural Bearing-Capacity-Assessment
  166. Chen Meng, Li Jiahui, Zhang Tong, Zhang Mingzhong (2025-01)
    3D Printability of Recycled Steel-Fiber-Reinforced Ultra-High-Performance Concrete
  167. Zhang Yonghong, Cui Suping, Wang Xinxin, Yang Bohao et al. (2025-01)
    Microstructure and Performance of Recycled Wind Turbine Blade-Based 3D Printed Concrete
  168. Shahzad Qamar, Li Fangyuan (2025-01)
    Impact of Concrete Interfaces on the Mechanical Performance of 3D Printed Concrete Structures
  169. Aydoğan Olcay, Kelek Bedirhan, Dittel Gözdem, Bhat Shantanu et al. (2025-01)
    Performance of 3D Printed Mortar with Varying Textile Reinforcement Properties
  170. Sakhare Vishakha, Najar Mohamed, Deshpande Sachin (2024-12)
    Printing Performance of 3D Printed Geopolymer Through Pumpability, Extrudability, Buildability Properties:
    A Review
  171. Yan Yufei, Zhang Mo, Ma Guowei, Sanjayan Jay (2024-12)
    An Eco-Friendly Ultra-High-Performance Geopolymer Concrete with Quaternary Binders for 3D Printing
  172. Dey Dhrutiman, Kumar Gaurav, Prasad Ventrapragada, Panda Biranchi (2024-12)
    Experimental Investigation of Thermal Performance of 3D Printed Slab Infused with Lightweight Concrete as Insulation
  173. Alarrak Rashed, Brand Alexander (2024-12)
    Mechanical Performance of Extruded Functionally-Graded Fiber-Reinforced Mortar with Targeted Fiber-Injection
  174. Luo Surong, Li Wenqiang, Cai Yili, Zhang Kaijian (2024-12)
    Effects of Carbonated Recycled Sand on the Interfacial Bonding Performance of 3D Printed Cement-Based Material
  175. Mohammed Arafat, Tamimi Adil, Abdwais Ahmed (2024-12)
    Structural Performance of 3D Concrete Printed Load-Bearing Walls
  176. Guan Jingyuan, Wang Li, Huang Yimiao, Ma Guowei (2024-12)
    3D Printed Concrete Composite Slabs Fabricated by Pre-Stressed Reinforced Permanent Formwork:
    Design, Manufacturing, and Performance
  177. Sahoo Pitabash, Gupta Souradeep (2024-11)
    3D Printing with Geopolymer-Stabilized Excavated Earth:
    Enhancement of Printability and Engineering-Performance Through Controlled Retardation
  178. Gomaa Shady, Irizarry Elmer, Ahmed Ayesha, Rosa Raul et al. (2024-11)
    3D Printing of Ultra-High-Performance Concrete:
    Shape Stability for Various Printing Systems
  179. Günzel F., Moelich Gerrit, Kanyenze Simba, Kruger Jacques et al. (2024-11)
    Investigating Inherent Cement Setting Mechanisms to Improve the Constructability Performance of Extrusion-Based 3D Concrete Printing
  180. Sabra Tarek, Ohno Motohiro, Kurihara Ryota, Kinomura Koji et al. (2024-11)
    Analytical Investigation on the Structural Performance of RC Column with 3D Printed Concrete Permanent Formwork
  181. Menna Costantino (2024-11)
    Seismic Performance of Large-Scale 3D Printed Concrete Panels:
    An Experimental and Analytical Study
  182. Liu Bing, Guo Yazhao, Wang Yang, Liu Qizhou et al. (2024-11)
    Study on the Compression Performance of 3D Printing Concrete Permanent Formwork Composite Columns
  183. Zeng Jun-Jie, Hu Xianwen, Sun Hou-Qi, Liu Yue et al. (2024-10)
    Triaxial Compressive Behavior of 3D Printed PE-Fiber-Reinforced Ultra-High-Performance Concrete
  184. Liu Bing, Cheng Xiao-Ming, Wang Lian-Gang, Qian Kai (2024-10)
    Compressive Performance of PVA Fiber-Reinforced 3D Concrete Printing Permanent Formwork Composite Columns Reinforced with BFRP-Bars
  185. Yang Yekai, Zhang Chiyu, Liu Zhongxian, Dong Liang et al. (2024-10)
    Effect of Hydration Process on the Inter-Layer Bond Tensile Mechanical Properties of Ultra-High-Performance Concrete for 3D Printing
  186. Ding Yao, Ou Xingjian, Qi Hongtuo, Xiong Gang et al. (2024-10)
    Inter-Layer Bonding Performance of 3D Printed Engineered Cementitious Composites:
    Rheological Regulation and Fiber Hybridization
  187. Federowicz Karol, Cendrowski Krzysztof, Sikora Paweł (2024-10)
    Low-Carbon Cementitious Composite Incorporated with Biochar and Recycled Fines Suitable for 3D Printing Applications:
    Hydration, Shrinkage and Early-Age Performance
  188. Dong Enlai, Jia Zijian, Jia Lutao, Rao Suduan et al. (2024-10)
    Modeling Fiber-Alignment in 3D Printed Ultra-High-Performance Concrete Based on Stereology-Theory
  189. Placzek Gerrit, Schwerdtner Patrick (2024-10)
    Comparison of Machine- and Performance Specifications of Concrete 3D Printers
  190. Cuevas Villalobos Karla, Chung Sang-Yeop, Sikora Paweł, Stephan Dietmar (2024-10)
    Performance of Normal-Weight and Lightweight 3D Printed Cementitious Composites with Recycled Glass:
    Sorption and Microstructural Perspective
  191. Althoey Fadi, Zaid Osama, Ahmed Bilal, Elhadi Khaled (2024-10)
    Impact of Double Hooked Steel-Fibers and Nano-Kaolin-Clay on Fresh Properties of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete
  192. Zhao Wanting, Zhao Yu, Zhu Lingli, Guan Xuemao (2024-10)
    Preparation of 3D Printed Concrete from Solid Waste:
    Study of the Relationship Between Steel-Slag Characteristics and Early Performance in 3D Printing
  193. Du Guoqiang, Sun Yan, Qian Ye (2024-10)
    Nature-Inspired Approach for Enhancing the Fracture Performance of 3D Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
  194. Wang Qiang, Yang Wenwei, Wang Li, Zhang Dan et al. (2024-09)
    Flexural Performance of the Integrated Steel-Truss-Reinforced 3D Printed Concrete Beams:
    Experimental and Numerical Analysis
  195. Vele Jiří, Prokop Simon, Ciganik Ondrej, Kurilla Lukáš et al. (2024-09)
    Non-Planar 3D Printing of Clay Columns:
    A Method for Improving Stability and Performance
  196. Cao Jing, Shengzhao E., Yang Yi, Shi Yaming et al. (2024-09)
    A Strategy for the Improvement of the Bonding Performance of 3D Printed Concrete Inter-Layer Interfaces
  197. Meyuhas Ohad, Larianovsky Pavel, Natanian Jonathan, Sprecher Aaron (2024-09)
    Thermal and Structural Performance of Cork-Cement Composite for Additive Manufacturing
  198. Ogura Hiroki, Hara Koichiro, Yamamoto Shinya, Abe Hiroyuki (2024-09)
    Flexural Performance of Fiber-Reinforced 3D Printed Concrete Beams with Axial Rebar
  199. Baytak Tugba, Gdeh Tawfeeq, Jiang Zhangfan, Arce Gabriel et al. (2024-09)
    Rheological, Mechanical, and Environmental Performance of Printable Graphene-Enhanced Cementitious Composites with Limestone and Calcined Clay
  200. Nikravan Ata, Aydin Tolga, Özyurt Nilüfer, Bundur Zeynep (2024-09)
    Enhancing the Performance of 3D Printed Fiber-Reinforced Mortar:
    Synergistic Effects of Clays and Bacterial Cells as Viscosity-Modifying-Agents
  201. Chougan Mehdi, Skibicki Szymon, Noaimat Yazeed, Federowicz Karol et al. (2024-09)
    Comparative Analysis of Ternary Blended Cement with Clay and Engineering-Brick-Aggregate for High-Performance 3D Printing
  202. Rider Bo, Kurtis K., Stewart L. (2024-09)
    Quantification of Porosity and Sorptivity in Fiber-Reinforced 3D Printed Mortar:
    Connecting Material-Composition and Structural Performance
  203. Mahdy Deena, Abdelrahim Marwa, Alatassi Adel (2024-09)
    Assessment of Air-Flow Performance Through Openings in 3D Printed Earthen Structure Using CFD Analysis
  204. Nana W., Baz Bilal, Blachier Christian, Peraud Mickaël et al. (2024-09)
    Mechanical Performance of 3D Printed Fiber-Reinforced Concrete
  205. Engel Sven, Hegger Josef, Claßen Martin (2024-09)
    Automated Manufacturing Process and Structural Performance of Ribbed CRC Slabs
  206. Lima Lucas, Wangler Timothy, Sanchez Asel, Anton Ana-Maria et al. (2024-09)
    Durability of 3D Printed Concrete:
    Performance-Assessment of a Two-Component System Against Water Absorption, Carbonation, and Chloride-Ingress
  207. Haripan Vislavath, Senthilnathan Shanmugaraj, Gettu Ravindra, Santhanam Manu et al. (2024-09)
    Open-Time and Extrudability-Performance-Analysis of 3D Printed Concrete with Recycled Concrete Fine Aggregates Using Rheological- and Computer-Vision-Techniques
  208. Ahmed Ahmed, Rosa Raul, Gomaa Shady, Irizarry Elmer et al. (2024-09)
    Rheological Characterization of Nano-Modified Ultra-High-Performance Concrete for 3D Printing
  209. Dey Dhrutiman, Panda Biranchi (2024-09)
    Numerical Evaluation of Thermal Performance and Improvement-Strategies for 3D Printed Concrete Structures
  210. Sovetova Meruyert, Calautit John (2024-09)
    Effect of the Printing Process on Thermal Performance of 3D Printed Structures
  211. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-09)
    Effect of Strain-Hardening Material on Seismic-Performance of 3D Printed Concrete Wall:
    A Numerical Study
  212. Mohan Manu, Tao Yaxin, Schutter Geert, Tittelboom Kim (2024-09)
    Influence of Temperature Variations on the Performance of Two-Component 3D Printable Mixtures
  213. Bono Victor, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2024-09)
    Tailored Low-Carbon Footprint Cementitious Material for 3D Printing:
    Strategies for Rheology Adjustment and Mechanical Performance Estimation
  214. Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-09)
    Enhancing Inter-Layer Bond Strength and Flexural Performance in 3D Concrete Printing with SHCC Bonding Agents
  215. Aouichat Belkis, Hosseinpoor Masoud, Yahia Ammar, Dupuis Mario (2024-09)
    How Can Nanocellulose Contribute to Enhance the Performance of Concrete 3D Printing?
  216. Shen Wenbin, Wang Hailong, Sun Xiaoyan (2024-09)
    Influence of Coarse Aggregates on the Performance of 3D Printing Concrete
  217. Mostert Jean-Pierre, Kruger Jacques (2024-09)
    Improving Durability Performance of 3D Printed Concrete via Topological Interlocking of Layers
  218. Liu Ruiqing, Du Hongjian (2024-09)
    Improving Thermal Insulation Performance of 3D Printed Concrete Wall
  219. Irizarry Elmer, Gomaa Shady, Rosa Raul, Ahmed Ayesha et al. (2024-09)
    Mechanical Characterization of 3D Printed Ultra-High-Performance Concrete
  220. Yao Yiming, Zhang Jiawei, Sun Yuanfeng, Pi Yilin et al. (2024-08)
    Mechanical Properties and Failure Mechanism of 3D Printing Ultra-High-Performance Concrete
  221. Fernand Muhirwa, Li Yaqi, Qian Qiwei, Chi Yin et al. (2024-08)
    Effects of Coarse Aggregates on 3D Printability and Mechanical Properties of Ultra-High-Performance Fiber-Reinforced Concrete
  222. Liu Xiongfei, Cai Huachong, Sun Yuhang, Wang Li et al. (2024-08)
    Spray-Based 3D Printed Foam-Concrete:
    Cooperative Optimization for Lightweight and High-Strength Performance
  223. Jia Lutao, Niu Geng, Dong Enlai, Jiang Yifan et al. (2024-08)
    Optimization-Strategy for Incorporating Recycled Brick-Powder in 3D Printed Concrete by Balancing Low-Carbon Footprint and Enhanced Performance
  224. Li Xiaoteng, Newlands Moray, Jones Rod (2024-08)
    Performance of a Multi-Layer Aligned Steel-Fiber-Reinforced Concrete Beam:
    A Preliminary Investigation Towards 3D Printing
  225. Jiang Shangjin, Wang Yuntao, Hua Sudong, Yue Hongfei et al. (2024-08)
    Preparation and Performance Characterization of Low-Density 3D Printed Expanded Perlite-Foam-Concrete
  226. Hutyra Adam, Bańkosz Magdalena, Tyliszczak Bożena (2024-08)
    Technology for Automated Production of High-Performance Building Compounds for 3D Printing
  227. Sovetova Meruyert, Calautit John (2024-07)
    Design, Calibration and Performance Evaluation of a Small-Scale 3D Printer for Accelerating Research in Additive Manufacturing in Construction
  228. Rubeis Tullio, Ciccozzi Annamaria, Giusti Letizia, Ambrosini Dario (2024-07)
    On the Use of 3D Printing to Enhance the Thermal Performance of Building Envelope:
    A Review
  229. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wang Sizhe et al. (2024-07)
    Axial Performances of the Steel-Rebar-Reinforced Column Confined by the Steel-Cable-Reinforced 3D Concrete Printing Permanent Formwork
  230. Lyu Xin, Elchalakani Mohamed, Wang Xiangyu, Sun Junbo et al. (2024-07)
    Mechanical Performance and Anisotropic Analysis of Rubberised 3D Printed Concrete Incorporating PP-Fiber
  231. Sucharda Oldřich, Gandel Radoslav, Cmiel Petr, Jeřábek Jan et al. (2024-07)
    Utilization of High-Performance Concrete Mixtures for Advanced Manufacturing Technologies
  232. Qiu Minghong, Qian Ye, Sun Yan, Leung Christopher (2024-07)
    Flexural Performance of Concrete Beams via 3D Printing Stay-in-Place Formwork Followed by Casting of Normal Concrete
  233. Liu Zhenbang, Li Mingyang, Liu Zhixin, Wong Teck (2024-07)
    Effects of Vinyl-Acetate and Ethylene-Copolymer on Printing and Mechanical Performances of 3D Printing Cementitious Materials
  234. Lv Zhenyuan, Duan Zhenhua, Xiao Jianzhuang, Ji Guangchao (2024-07)
    Exploration of 3D Printed Concrete with Recycled Fine and Coarse Aggregates:
    Material, Equipment and Performance
  235. Sahana C., Soda Prabhath, Dwivedi Ashutosh, Kumar Sandeep et al. (2024-07)
    3D Printing with Stabilized Earth:
    Material-Development and Effect of Carbon-Sequestration on Engineering-Performance
  236. Kinomura Koji, Zhang Wenbo, Kawamura Keisuke (2024-07)
    Structural Performance of a Large Column with an Outer Shell Formed by Short-Fiber-Reinforced Mortar-Extrusion
  237. Lu Bing, Li Mingyang, Qian Shunzhi, Li King et al. (2024-07)
    High-Performance 3D Concrete Printing with Zeolite
  238. Cui Weijiu, Shen Liang, Ji Dongsheng, Liu Wenliang et al. (2024-07)
    Mechanical Performance and Permeability of Low-Carbon Printable Concrete
  239. Şahin Hatice, Mardani Ali, Mardani Naz (2024-07)
    Performance Requirements and Optimum Mix Proportion of High-Volume Fly-Ash 3D Printable Concrete
  240. Bai Gang, Guan Jingyuan, Wang Li, Li Zhijian et al. (2024-07)
    Bending Performance of 3D Printed Ultra-High-Performance Concrete Composite Beams
  241. Lee Yoon, Lee Sang, Kim Jae, Jeong Hoseong et al. (2024-07)
    Inter-Layer Bond Strength of 3D Printed Concrete Members with Ultra-High-Performance Concrete Mix
  242. Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-07)
    Development of Strain-Hardening Cementitious Composites (SHCC) As Bonding Materials to Enhance Inter-Layer and Flexural Performance of 3D Printed Concrete
  243. Sun Chang, Li Jiawang, Liu Qiong, Chen Kailun et al. (2024-07)
    Compressive Performance and Damage Mechanism of Concrete Short Columns Confined by Steel-Wires-Reinforced 3DPM
  244. Wang Jun, Zhang Xuanzheng, Liu Zhenhua, Zhao Jiasheng (2024-07)
    Study on the Effects of Printing Process and Reinforcement Materials on the Performance of 3D-Printed Glass Bead Insulation Mortar
  245. Duarte Gonçalo, Duarte José, Brown Nathan, Memari Ali et al. (2024-06)
    Design for Early-Age Structural Performance of 3D Printed Concrete Structures:
    A Parametric Numerical Modeling Approach
  246. Giwa Ilerioluwa, Dempsey Mary, Fiske Michael, Kazemian Ali (2024-06)
    3D Printed Sulfur-Regolith Concrete Performance Evaluation for Waterless Extraterrestrial Robotic Construction
  247. Peng Yiming, Unluer Cise (2024-06)
    Performance and Microstructural Development of 3D Printable MgO-SiO2 Mixes Containing Magnesium-Silicate-Monohydrate
  248. Dong Liang, Yang Yekai, Liu Zhongxian, Zhang Yan et al. (2024-06)
    Interface Bonding Characteristics of 3D Printed Ultra-High-Performance Concrete After Elevated Temperatures
  249. Du Jiashuai, Wei Yazhi, Zhang Hui, Idriss Aboubaker (2024-06)
    Effects of Oyster-Shell-Derivatives on Performance Enhancement of Biomass-Based 3D Printed Concrete
  250. Yan Kang-Tai, Wang Xian-Peng, Ding Yao, Li Lingzhi et al. (2024-06)
    3D Printed LC3-Based Lightweight Engineered Cementitious Composites:
    Fresh State, Hardened Material-Properties and Beam-Performance
  251. Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay, Mechtcherine Viktor (2024-06)
    In-Process Textile Reinforcement Method for 3D Concrete Printing and Its Structural Performance
  252. Mathew Ashitta, Philip Nivin, Jędrzejewska Agnieszka (2024-05)
    Enhancing Sustainability and Performance of 3D Printing Mortar with Alccofine 1203, GGBS, and Kaolin:
    Experimental Investigation and Mechanical Characterization
  253. Luo Surong, Li Wenqiang, Wang Dehui (2024-05)
    Study on Bending Performance of 3D Printed PVA-Fiber-Reinforced Cement-Based Material
  254. Liu Zhenbang, Li Mingyang, Wong Teck, Tan Ming (2024-05)
    Determine the Effects of Pore Properties on the Mechanical Performances of 3D Concrete Printing Units with Experimental and Numerical Methods
  255. Qiu Minghong, Qian Ye, Dai Jian-Guo (2024-05)
    Enhancing the Flexural Performance of Concrete Beams with 3D Printed UHP-SHCC Permanent Formwork via Graded Fiber Volume Fraction
  256. Tao Yaxin, Dai Xiaodi, Schutter Geert, Tittelboom Kim (2024-05)
    Adhesion Performance of Alkali-Activated Material for 3D Printing of Tunnel Linings at Different Temperatures
  257. Vargas José, Sjölander Andreas, Westerlind Helena, Silfwerbrand Johan (2024-05)
    Internal Topology-Optimization of 3D Printed Concrete Structures:
    A Method for Enhanced Performance and Material-Efficiency
  258. Yang Jin, Zhai Gaoyuan, He Xingyang, Tang Yuanzhen et al. (2024-05)
    Properties and Microstructure of a Low-Carbon Clinker-Free Cementitious Binder and Its Extrusion-Based Printing Performance
  259. Wang Xiaonan, Li Wengui, Guo Yipu, Kashani Alireza et al. (2024-04)
    Concrete 3D Printing Technology for Sustainable Construction:
    A Review on Raw Material, Concrete Type and Performance
  260. Jia Zijian, Kong Lingyu, Jia Lutao, Ma Lei et al. (2024-04)
    Printability and Mechanical Properties of 3D Printing Ultra-High-Performance Concrete Incorporating Limestone-Powder
  261. Chamatete Kunda, Yalçınkaya Çağlar (2024-03)
    Numerical Evaluation on Thermal Performance of 3D Printed Concrete Walls:
    The Effects of Lattice-Type, Filament-Width and Granular-Filling-Material
  262. Jay Bhumika, Basavanagowda G., Kumari Archana, Chauhan Aishwarya et al. (2024-03)
    Application of Internet of Things (IoT) in Seismic Performance Evaluation of 3D Printed Structure
  263. Niu Geng, Liu Chao, Jia Lutao, Ma Lei et al. (2024-03)
    Preparation and Performance-Analysis of 3D Printed Lightweight EPS-Concrete:
    Insights from the Excess-Paste-Theory
  264. Du Guoqiang, Sun Yan, Qian Ye (2024-03)
    Flexural Performance of Nature-Inspired 3D Printed Strain-Hardening Cementitious Composites with Bouligand Structures
  265. Kotov Evgeny, Nemova Darya, Sergeev Vitaly, Dontsova Anna et al. (2024-03)
    Thermal Performance-Assessment of Aerogel Application in Additive Construction of Energy-Efficient Buildings
  266. Shahzad Qamar, Abbas Nadeem, Akbar Muhammad, Sabi Ehab et al. (2024-03)
    Influence of Print-Speed and Nozzle-Diameter on the Fiber-Alignment in 3D Printed Ultra-High-Performance Concrete
  267. İlcan Hüseyin, Özkılıç Hamza, Tuğluca Merve, Şahmaran Mustafa (2024-02)
    Inter-Layer Mechanical Performance of 3D Printed Cementitious Systems:
    A Comprehensive Study on Operational and Material Parameters
  268. Wang Xiaonan, Li Wengui, Guo Yipu, Kashani Alireza et al. (2024-02)
    Concrete 3D Printing Technology in Sustainable Construction:
    A Review on Raw Materials, Concrete Types and Performances
  269. Silveira Marcos, Wagner Juliana, Khanverdi Mohsen, Das Sreekanta (2024-02)
    Structural Performance of Large-Scale 3D Printed Walls Subjected to Axial Compression Load
  270. Şahin Hatice, Mardani Ali, Beytekin Hatice (2024-02)
    Effect of Silica-Fume Utilization on Structural Build-Up, Mechanical and Dimensional Stability Performance of Fiber-Reinforced 3D Printable Concrete
  271. Prihar Arjun, Garlock Maria, Najmeddine Aimane, Moini Mohamadreza (2024-01)
    Mechanical Performance of Sinusoidally Architected Concrete Enabled by Robotic Additive Manufacturing
  272. Özalp Fatih (2024-01)
    Mechanical Behavior and Permeability Properties of Sustainable and High-Performance Anisotropic Three-Dimensional Printable Concrete
  273. Chen Kailun, Liu Qiong, Chen Bing, Zhang Shishun et al. (2024-01)
    A Review on Effect of Raw Materials on the Performance of 3D Printed Geopolymer System for Construction
  274. Raza Saim, Triantafyllidis Zafiris, Anton Ana-Maria, Dillenburger Benjamin et al. (2024-01)
    Seismic Performance of Fe-SMA Pre-Stressed Segmental Bridge Columns with 3D Printed Permanent Concrete Formwork
  275. Westerlind Helena, Vargas José, Silfwerbrand Johan (2024-01)
    Towards the Application of Mesostructures in 3D Concrete Printing:
    Evaluating Load-bearing Performance
  276. Neri Manuela, Licciardello Lucia, Reggia Adriano, Pilotelli M. et al. (2024-01)
    Improving the Energy Performance of a 3D Printed Wall Using Recycled Material
  277. Li Feng, Zhang Rongrong, Zhou Siqi, Zhu Xingyi (2023-12)
    Printability and Hardening Performance of Three-Dimensionally-Printed Geopolymer Based on Lunar Regolith Simulant for Automated Construction of Lunar Infrastructure
  278. Li Zihan, Liu Huanbao, Nie Ping, Cheng Xiang et al. (2023-12)
    Mechanical Properties of Concrete Reinforced with High-Performance Micro-Particles for 3D Concrete Printing
  279. Yan Zitong, Zeng Jun-Jie, Zhuge Yan, Liao Jinjing et al. (2023-12)
    Compressive Behavior of FRP-Confined 3D Printed Ultra-High-Performance Concrete Cylinders
  280. Qiu Minghong, Sun Yan, Qian Ye (2023-12)
    Interfacial Bonding Performance of 3D Printed Ultra-High-Performance Strain-Hardening Cementitious Composites and Cast Normal Concrete
  281. Dey Dhrutiman, Nguyen Vuong, Nguyen-Xuan Hung, Srinivas Dodda et al. (2023-12)
    Flexural Performance of 3D Printed Concrete Structure with Lattice-Infills
  282. Suthar Mahendrabhai, Shariff Najeeb, Nanthagopalan Prakash (2023-12)
    Performance-Assessment of Topologically Optimised 3D Printable Concrete Sewer Cross-Section Using Finite Element Simulation
  283. Straßer Alexander, Kränkel Thomas, Gehlen Christoph (2023-12)
    Integrating Wire Arc Additive Manufacturing into Selective Paste-Intrusion for Reinforced Concrete Elements:
    Effect of Temperature on the Mechanical Performance
  284. Warsi Syed, Srinivas Dodda, Panda Biranchi, Biswas Pankaj (2023-12)
    Investigating the Impact of Coarse Aggregate Dosage on the Mechanical Performance of 3D Printable Concrete
  285. Felfili Guimarães Gabriela, Oliveira Marcos, Almeida Martinelli Juliana (2023-12)
    Performance-Evaluation of the 3D Printing System Through Fault-Tree-Analysis-Method
  286. Calderon-Cordova Carlos, Sarango Leonardo, Chamba Dennis, Sarango Roger et al. (2023-12)
    Performance-Analysis of Motion-Control-Algorithms of an Industrial-Robot-Arm Applied to 3D Concrete Printing Systems
  287. Ambily Parukutty, Rajendran Neeraja, Kaliyavaradhan Senthil (2023-11)
    Mix-Design, Optimization and Performance-Evaluation of Extrusion-Based 3D Printable Concrete
  288. Dams Barrie, Shepherd Paul, Ball Richard (2023-11)
    Development and Performance Evaluation of Fibrous Pseudoplastic Quaternary Cement Systems for Aerial Additive Manufacturing
  289. Wang Xianlin, Banthia Nemkumar, Yoo Doo-Yeol (2023-11)
    Reinforcement Bond Performance in 3D Concrete Printing:
    Explainable Ensemble Learning Augmented by Deep Generative Adversarial Networks
  290. Wu Hao, Li Yu, Xie Xingje, Gao Xiaofan et al. (2023-11)
    Structural Performance-Based 3D Concrete Printing for an Efficient Concrete Beam
  291. Fu Yanan, Zhang Ying, Wu Lei (2023-11)
    Experimental Study on Structural Performance of Cast-in-Place Frame Printed Concrete Wall
  292. Tamimi Adil, Hassan Habibelrahman, Rodriguez-Ubinas Edwin, Alhaidary Haidar et al. (2023-11)
    Thermal Performance of 3D Concrete Printed Walls:
    Calculated and In-Situ Measured U-Values
  293. Gao Huaxing, Chen Yuxuan, Chen Qian, Yu Qingliang (2023-11)
    Thermal and Mechanical Performance of 3D Printing Functionally Graded Concrete:
    The Role of SAC on the Rheology and Phase Evolution of 3DPC
  294. Li Zhuming, Aslani Farhad (2023-10)
    Performance of 3D Printed Beams and Slabs Using Self-Sensing Cementitious Composites and DIC Method
  295. Dittel Gözdem, Scheurer Martin, Evers Clara, Meyer-Brötz Fabian et al. (2023-10)
    Structural Performance of Textile Reinforced 3D Printed Concrete Elements
  296. Noaimat Yazeed, Chougan Mehdi, Albar Abdulrahman, Skibicki Szymon et al. (2023-10)
    Recycled Brick-Aggregates in One-Part Alkali-Activated Materials:
    Impact on 3D Printing Performance and Material-Properties
  297. Overmeir Anne, Šavija Branko, Bos Freek, Schlangen Erik (2023-09)
    Effects of 3D Concrete Printing Phases on the Mechanical Performance of Printable Strain-Hardening Cementitious Composites
  298. Asensio Javier, Josa Irene, Monserrat Andrea, Fuente Albert (2023-09)
    3D‐Printed Concrete Footbridges:
    An Approach to Assess the Sustainability Performance
  299. Moelich Migael, Zijl Gideon, Villiers Wibke (2023-09)
    Thermal Performance of Cavities in 3DPC Building Façades
  300. Ingle Vaibhav, Prem Prabhat, Ramamurthy Vignesh, Ravichandran Darssni (2023-09)
    Acoustic Emission Characterization of 3D Printed Ultra-High-Performance Concrete Beams Under Bending
  301. Christen Heidi, Zijl Gideon, Villiers Wibke, Moelich Migael (2023-09)
    Validated Simulation of Thermal Performance of Phase-Change-Material-Infused Recycled Brick-Aggregate in 3D Printed Concrete
  302. Ramamurthy Vignesh, Prem Prabhat, Ingle Vaibhav, Giridhar Greeshma (2023-09)
    Fracture Characterization of 3D Printed Ultra-High-Performance Fiber Concrete Beams Using Acoustic Emission
  303. Rehman Atta, Perrot Arnaud, Birru Bizu, Kim Jung-Hoon (2023-09)
    Recommendations for Quality-Control in Industrial 3D Concrete Printing Construction with Mono-Component Concrete:
    A Critical Evaluation of Ten Test-Methods and the Introduction of the Performance-Index
  304. Özkılıç Hamza, İlcan Hüseyin, Aminipour Ehsan, Tuğluca Merve et al. (2023-08)
    Bond Properties and Anisotropy Performance of 3D Printed Construction and Demolition Waste-Based Geopolymers:
    Effect of Operational- and Material-Oriented Parameters
  305. Du Longyu, Zhou Jiehang, Lai Jianzhong, Wu Kai et al. (2023-07)
    Effect of Pore-Structure on Durability and Mechanical Performance of 3D Printed Concrete
  306. Salah Husam, Mutalib Azrul, Kaish Amrul, Syamsir Agusril et al. (2023-07)
    Development of Ultra-High-Performance Silica-Fume-Based Mortar Incorporating Graphene-Nano-Platelets for 3D Concrete Printing Application
  307. Harbouz Ilhame, Rozière Emmanuel, Loukili Ahmed, Yahia Ammar (2023-07)
    Effect of the Structuration-Rate on Dimensional Stability and Mechanical Performance of 3D Printed Mortars
  308. Ghosh Debalina, Anleu Paula, Pape Yann, Ma Zhonggoue (2023-07)
    Effect of Inter-Layer-Time-Lapse and Workability-Retention on Printed Concrete Performance
  309. Bai Gang, Chen G., Li Rong, Wang Li et al. (2023-07)
    3D Printed Ultra-High-Performance Concrete:
    Preparation, Application, and Challenges
  310. Ravula Risheek, Gatheeshgar Perampalam (2023-07)
    On the Thermal-Energy Performance of 3D Printed Concrete Wall Panels Designed with Varying Insulation Ratios
  311. Zhang Daobo, Feng Peng, Zhou Peizhao, Xu Weiguo et al. (2023-06)
    3D Printed Concrete Walls Reinforced with Flexible FRP Textile:
    Automatic Construction, Digital Rebuilding, and Seismic Performance
  312. Shenawa Amaal, Karoti Poonam (2023-06)
    3D Printing in Construction, Mixture Characteristics, Strength, and Thermal Performance-Review
  313. Xu Zhuoyue, Zhang Dawang, Li Hui, Jin Haoyu et al. (2023-06)
    Mix-Design and 3D Printing Correlation-Performance of PCC-Based 3DPM
  314. Paudel Satish (2023-06)
    Investigation of Modelling Approaches to Study the Structural Performance of 3D Printed Plain Wall Under Uniform Axial Compression
  315. Oh Sangwoo, Choi Seongcheol (2023-05)
    Effects of Superabsorbent Polymers (SAP) On the Rheological Behavior of Cement Mortars:
    A Rheological Study on Performance Requirements for 3D Printable Cementitious Materials
  316. Forcael Eric, Martínez-Chabur Paula, Ramírez-Cifuentes Iván, García-Alvarado Rodrigo et al. (2023-05)
    Performance-Analysis of 3D Concrete Printing Processes Through Discrete-Event-Simulation
  317. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2023-05)
    Wet Joint Performance of 3D Printed Concrete Beam Segments Under Flexural Loading
  318. Tao Yaxin, Rahul Attupurathu, Mohan Manu, Schutter Geert et al. (2023-05)
    Enhancing Mechanical Performance of Twin-Pipe Printable Concrete Using a Binary Binder System
  319. Bhushan Jindal Bharat, Jangra Parveen (2023-05)
    3D Printed Concrete:
    A Comprehensive Review of Raw Material’s Properties, Synthesis, Performance, and Potential Field Applications
  320. Wang Li, Ye Kehan, Wan Qian, Li Zhijian et al. (2023-05)
    Inclined 3D Concrete Printing:
    Build-Up Prediction and Early-Age Performance-Optimization
  321. Fan Dingqiang, Zhu Jinyun, Fan Mengxin, Lu Jianxian et al. (2023-04)
    Intelligent Design and Manufacturing of Ultra-High-Performance Concrete:
    A Review
  322. Razzaghian Ghadikolaee Mehrdad, Cerro-Prada Elena, Pan Zhu, Korayem Asghar (2023-04)
    Nanomaterials as Promising Additives for High-Performance 3D Printed Concrete:
    A Critical Review
  323. Kumar Devalla Tharun, Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2023-04)
    Investigation on the Flexural and Tensile Performance of 3D Printable Cementitious Mixtures Considering the Effect of Fiber-Distribution
  324. Cruz Gil, Dizon John, Farzadnia Nima, Zhou Hongyu et al. (2023-04)
    Performance, Applications, and Sustainability of 3D Printed Cement and Other Geomaterials
  325. Wang Li, Hu Yuanyuan, Wang Qiao, Cui Tianlong (2023-03)
    Shrinkage and Cracking Performance of PP/PVA Fiber-Reinforced 3D Printed Mortar
  326. Panda Biranchi, Tran Jonathan (2023-03)
    Material-Design, Additive Manufacturing, and Performance of Cement-Based Materials
  327. Cui Weijiu, Wang Tianheng, Chen Xu, Shen Wenkai et al. (2023-03)
    Study of 3D Printed Concrete with Low-Carbon Cementitious Materials Based on Its Rheological Properties and Mechanical Performances
  328. Chen Yanjuan, Kuva Jukka, Mohite Ashish, Li Zhongsen et al. (2023-03)
    Investigation of the Internal Structure of Hardened 3D Printed Concrete by X-CT Scanning and Its Influence on the Mechanical Performance
  329. Atkinson Cynthia, Aslani Farhad (2023-03)
    Performance of 3D Printed Columns Using Self-Sensing Cementitious Composites
  330. Yao Xiaofei, Lyu Xin, Sun Junbo, Wang Bolin et al. (2023-03)
    AI-Based Performance Prediction for 3D Printed Concrete Considering Anisotropy and Steam-Curing Condition
  331. Ding Tao, Wang Ziyue, Liu Haoran, Xiao Jianzhuang (2023-03)
    Simulation on Pull-Out Performance of Steel-Bar from 3D Printed Concrete
  332. Liu Haoran, Xiao Jianzhuang, Ding Tao (2023-03)
    Flexural Performance of 3D Printed Composite Beams with ECC and Recycled Fine Aggregate Concrete:
    Experimental and Numerical Analysis
  333. Şahin Hatice, Mardani Ali (2023-02)
    Mechanical Properties, Durability Performance and Inter-Layer Adhesion of 3DPC Mixtures:
    A State‐of‐the‐art Review
  334. Giwa Ilerioluwa, Game Daniel, Ahmed Hassan, Noorvand Hassan et al. (2023-02)
    Performance and Macrostructural Characterization of 3D Printed Steel-Fiber-Reinforced Cementitious Materials
  335. Yang Yekai, Wu Chengqing, Liu Zhongxian (2023-01)
    Rate-Dependent Behavior of 3D Printed Ultra-High-Performance Fiber-Reinforced Concrete Under Dynamic Splitting Tensile
  336. Arunothayan Arun, Sanjayan Jay (2023-01)
    Elevated Temperature Effects on 3D Printed Ultra-High-Performance Concrete
  337. Zhu Lingli, Yao Jie, Zhao Yu, Ruan Wenqiang et al. (2022-12)
    Effects of Composite Cementation System on Rheological and Working Performances of Fresh 3D Printable Engineered Cementitious Composites
  338. Zahrani Abdullah, Alghamdi Abdulrahman, Basalah Ahmad (2022-12)
    Computational Optimization of 3D Printed Concrete Walls for Improved Building Thermal Performance
  339. İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Ozcelikci Emircan et al. (2022-12)
    Rheological Property and Extrudability Performance-Assessment of Construction and Demolition Waste-Based Geopolymer Mortars with Varied Testing Protocols
  340. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2022-12)
    Assessing Printing Synergism in a Dual 3D Printing System for Ultra-High-Performance Concrete In-Process Reinforced Cementitious Composite
  341. Liu Xiongfei, Li Jixiang, Li Qi, Hou Gunayu (2022-11)
    Mechanical Performance Optimization in Spray-Based Three-Dimensional-Printed Mortar Using Carbon-Fiber
  342. Wang Lining, Aslani Farhad (2022-11)
    Structural Performance of Reinforced Concrete Beams with 3D Printed Cement-Based Sensor Embedded and Self-Sensing Cementitious Composites
  343. Arunothayan Arun, Nematollahi Behzad, Khayat Kamal, Ramesh Akilesh et al. (2022-11)
    Rheological Characterization of Ultra-High-Performance Concrete for 3D Printing
  344. Lu Bing, Li Hongliang, Li Mingyang, Wong Teck et al. (2022-11)
    Mechanism and Design of Fluid Catalytic Cracking Ash-Blended Cementitious Composites for High-Performance Printing
  345. Liu Miao, Wang Li, Ma Guowei, Li Weiwei et al. (2022-11)
    U-Type Steel-Wire-Mesh for the Flexural Performance Enhancement of 3D Printed Concrete:
    A Novel Reinforcing Approach
  346. Salandin Andrea, Quintana-Gallardo Alberto, Gómez-Lozano Vicente, Guillén-Guillamón Ignacio (2022-10)
    The First 3D Printed Building in Spain:
    A Study on Its Acoustic, Thermal and Environmental Performance
  347. Dey Dhrutiman, Panda Biranchi (2022-10)
    An Experimental Study of Thermal Performance of 3D Printed Concrete Slabs
  348. Chougan Mehdi, Ghaffar Seyed, Nematollahi Behzad, Sikora Paweł et al. (2022-09)
    Effect of Natural and Calcined-Halloysite-Clay-Minerals as Low-Cost-Additives on the Performance of 3D Printed Alkali-Activated Materials
  349. Ren Chuangnan, Gao Baobin, Geng Chenhui, Zhu Wenjie (2022-09)
    Assembled Design and Compressive Performance Simulation of Mine Waterproof Wall Based on Concrete 3D Printing
  350. Medicis Carolina, Gonzalez Sergio, Alvarado Yezid, Vacca Hermes et al. (2022-09)
    Mechanical Performance of Commercially Available Premix UHPC-Based 3D Printable Concrete
  351. Game Daniel, Giwa Ilerioluwa, Ahmed Hassan, Noorvand Hassan et al. (2022-09)
    Development of Ultra-High-Performance Engineered Cementitious Composites for 3D Printing Applications
  352. Zafar Muhammad, Bakhshi Amir, Hojati Maryam (2022-09)
    Toward 3D Printable Engineered Cementitious Composites:
    Mix-Design Proportioning, Flowability, and Mechanical Performance
  353. Tao Yaxin, Rahul Attupurathu, Mohan Manu, Tittelboom Kim et al. (2022-09)
    Blending Performance of Helical Static Mixer Used for Twin-Pipe 3D Concrete Printing
  354. Araújo Rísia, Martinelli Antônio, Cabral Kleber, Dantas André et al. (2022-08)
    Thermal Performance of Cement-Leca Composites for 3D Printing
  355. Lesovik Valeriy, Tolstoy Aleksandr, Fediuk Roman, Amran Mugahed et al. (2022-08)
    Improving the Performances of a Mortar for 3D Printing by Mineral Modifiers
  356. Ebrahimi Mahdi, Mohseni Mohammad, Aslani Alireza, Zahedi Rahim (2022-08)
    Investigation of Thermal Performance and Life Cycle Assessment of a 3D Printed Building
  357. Yoris-Nobile Adrian, Lizasoain-Arteaga Esther, Slebi-Acevedo Carlos, Blanco-Fernandez Elena et al. (2022-07)
    Life-Cycle-Assessment and Multi-Criteria Decision-Making-Analysis to Determine the Performance of 3D Printed Cement Mortars and Geopolymers
  358. Dong Liang, Yang Yekai, Liu Zhongxian, Ren Quanchang et al. (2022-07)
    Microstructure and Mechanical Behavior of 3D Printed Ultra-High-Performance Concrete after Elevated Temperatures
  359. Ma Guowei, Bai Gang, Wang Li, Wang Fang (2022-07)
    Explosion-Resistance of 3D Printing Ultra-High-Performance Concrete Based on Contact-Explosion Tests
  360. Abdalqader Ahmed, Sonebi Mohammed, Dedenis Marie, Amziane Sofiane et al. (2022-06)
    Mechanical Performance of 3D Printed Concrete Containing Fly-Ash, Metakaolin and Nano-Clay
  361. Das Arnesh, Aguilar Sanchez Asel, Wangler Timothy, Flatt Robert (2022-06)
    Freeze-Thaw-Performance of 3D Printed Concrete:
    Influence of Interfaces
  362. Nemova Darya, Kotov Evgeny, Andreeva Darya, Khorobrov Svyatoslav et al. (2022-06)
    Experimental Study on the Thermal Performance of 3D Printed Enclosing Structures
  363. Matos Paulo, Zat Tuani, Corazza Kiara, Fensterseifer Emilia et al. (2022-05)
    Effect of TiO2 Nano-Particles on the Fresh Performance of 3D Printed Cementitious Materials
  364. Xu Nuoyan, Qian Ye, Yu Jing, Leung Christopher (2022-05)
    Tensile Performance of 3D Printed Strain-Hardening Cementitious Composites Considering Material-Parameters, Nozzle-Size and Printing-Pattern
  365. Geng Zifan, Pan Hao, Zuo Wenqiang, She Wei (2022-05)
    Functionally Graded Lightweight Cement-Based Composites with Outstanding Mechanical Performances via Additive Manufacturing
  366. Aslani Farhad, Dale Ryan, Hamidi Fatemeh, Valizadeh Afsaneh (2022-05)
    Mechanical and Shrinkage Performance of 3D Printed Rubberised Engineered Cementitious Composites
  367. Sergis Vasileios, Ouellet-Plamondon Claudiane (2022-04)
    D-Optimal Design of Experiments Applied to 3D High-Performance Concrete Printing Mix-Design
  368. Tan Yuan, Dahlenburg Maximilian, Fottner Johannes, Kessler Stephan (2022-04)
    Influencing Factors of the Mixing Performance of a Near-Nozzle Continuous Mixer for 3D Concrete Printing:
    An Analysis Based on Spatial-Lacey-Mixing-Index
  369. Park Min, Cheon Gain, Alemayehu Robel, Ju Young et al. (2022-04)
    Seismic Performance of F3D Free-Form Structures Using Small-Scale Shaking Table Tests
  370. Wang Bolin, Yao Xiaofei, Yang Min, Zhang Runhong et al. (2022-04)
    Mechanical Performance of 3D Printed Concrete in Steam-Curing Conditions
  371. Rollakanti Chiranjeevi, Prasad C. (2022-04)
    Applications, Performance, Challenges and Current Progress of 3D Concrete Printing Technologies as the Future of Sustainable Construction:
    A State of the Art Review
  372. Wang Huan, Tian Xinchen, Wei Huixian, Dai Xueyan et al. (2022-04)
    Effects of Redispersible Latex-Powder on the Performance of 3D Printing Cementitious Materials
  373. Liu Qiang, Jiang Quan, Huang Mojia, Xin Jie et al. (2022-03)
    Modifying Effect of Anionic Polyacrylamide Dose for Cement-Based 3DP Materials:
    Printability and Mechanical Performance Tests
  374. Wang Bolin, Zhai Mingang, Yao Xiaofei, Wu Qing et al. (2022-03)
    Printable and Mechanical Performance of 3D Printed Concrete Employing Multiple Industrial Wastes
  375. Liu Siyu, Lu Bing, Li Hongliang, Pan Zehua et al. (2022-03)
    A Comparative Study on Environmental Performance of 3D Printing and Conventional Casting of Concrete Products with Industrial Wastes
  376. Mohan Manu, Rahul Attupurathu, Dam Benjamin, Zeidan Talina et al. (2022-02)
    Performance Criteria, Environmental Impact and Cost-Assessment for 3D Printable Concrete Mixtures
  377. Yang Yekai, Wu Chengqing, Liu Zhongxian, Li Jun et al. (2022-02)
    Characteristics of 3D Printing Ultra-High-Performance Fiber-Reinforced Concrete Under Impact Loading
  378. Chen Yuning, Liu Chao, Cao Ruilin, Chen Chun et al. (2022-02)
    Systematical Investigation of Rheological Performance Regarding 3D Printing Process for Alkali-Activated Materials:
    Effect of Precursor Nature
  379. Pham Luong, Lu Guoxing, Tran Jonathan (2022-02)
    Influences of Printing-Pattern on Mechanical Performance of Three-Dimensional-Printed Fiber-Reinforced Concrete
  380. Ayegba Blessing, Egbe King-James, Nazar Ali, Huang Mingzhi et al. (2022-01)
    Resource Efficiency and Thermal Comfort of 3D Printable Concrete Building Envelopes Optimized by Performance Enhancing Insulation:
    A Numerical Study
  381. Suntharalingam Thadshajini, Upasiri Irindu, Nagaratnam Brabha, Poologanathan Keerthan et al. (2022-01)
    Finite Element Modelling to Predict the Fire Performance of Bio-Inspired 3D Printed Concrete Wall Panels Exposed to Realistic Fire
  382. Cui Jinyang, He Zhen, Zhang Guozhi, Cai Xinhua (2022-01)
    Rheological Properties of Sprayable Ultra-High-Performance Concrete with Different Viscosity-Enhancing Agents
  383. Yang Yekai, Wu Chengqing, Liu Zhongxian, Zhang Hai (2021-12)
    3D Printing Ultra-High-Performance Fiber-Reinforced Concrete under Triaxial Confining Loads
  384. Sun Xiaoyan, Ye Boxing, Lin Kangjian, Wang Hailong (2021-12)
    Shear-Performance of 3D Printed Concrete Reinforced with Flexible or Rigid Materials Based on Direct-Shear-Test
  385. Nguyen Vuong, Choudhry Niranjan, Panda Biranchi, Nguyen-Xuan Hung et al. (2021-12)
    Performance of Concrete Beam Reinforced with 3D Printed Bio-Inspired Primitive Scaffold Subjected to Three-Point Bending
  386. Kompella Sriram, Monte Francesco, Cucchi Marco, Marcucci Andrea et al. (2021-12)
    A Methodology to Assess Early-Age Fracture Performance of 3D Printable Cementitious Mixes
  387. Wang Hailong, Shao Jianwen, Zhang Jing, Zou Daoqin et al. (2021-11)
    Bond Shear Performances and Constitutive Model of Interfaces Between Vertical and Horizontal Filaments of 3D Printed Concrete
  388. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2021-11)
    Influence of Substrate-Surface-Roughness and Moisture-Content on Tensile Adhesion Performance of 3D Printable Concrete
  389. Liu Chao, Zhang Rongfei, Liu Huawei, He Chunhui et al. (2021-11)
    Analysis of the Mechanical Performance and Damage Mechanism for 3D Printed Concrete Based on Pore-Structure
  390. Pham Luong, Panda Biranchi, Tran Jonathan (2021-11)
    Fresh and Hardened Properties of 3D Printable Polymer-Fiber-Reinforced High-Performance Cementitious Composite
  391. Kondepudi Kala, Subramaniam Kolluru (2021-11)
    Extrusion-Based Three-Dimensional Printing Performance of Alkali-Activated Binders
  392. Yang Yekai, Wu Chengqing, Liu Zhongxian, Wang Hailiang et al. (2021-10)
    Mechanical Anisotropy of Ultra-High-Performance Fiber-Reinforced Concrete for 3D Printing
  393. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Khayat Kamal et al. (2021-10)
    Digital Fabrication of Eco-Friendly Ultra-High-Performance Fiber-Reinforced Concrete
  394. Suntharalingam Thadshajini, Upasiri Irindu, Gatheeshgar Perampalam, Poologanathan Keerthan et al. (2021-09)
    Energy Performance of 3D Printed Concrete Walls:
    A Numerical Study
  395. Che Yujun, Tang Shengwen, Yang Huashan, Li Weiwei et al. (2021-08)
    Influences of Air-Voids on the Performance of 3D Printing Cementitious Materials
  396. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2021-08)
    In-Process Reinforcing Method:
    Dual 3D Printing Procedure for Ultra-High-Performance Concrete Reinforced Cementitious Composites
  397. Suntharalingam Thadshajini, Gatheeshgar Perampalam, Upasiri Irindu, Poologanathan Keerthan et al. (2021-06)
    Fire Performance of Innovative 3D Printed Concrete Composite Wall Panels:
    A Numerical Study
  398. Song Hongwei, Li Xinle (2021-05)
    An Overview on the Rheology, Mechanical Properties, Durability, 3D Printing, and Microstructural Performance of Nanomaterials in Cementitious Composites
  399. Chen Yidong, Zhang Yunsheng, Pang Bo, Liu Zhiyong et al. (2021-05)
    Extrusion-Based 3D Printing Concrete with Coarse Aggregate:
    Printability and Direction-Dependent Mechanical Performance
  400. Javed Ali, Mantawy Islam, Azizinamini Atorod (2021-05)
    3D Printing of Ultra-High-Performance Concrete for Robotic Bridge Construction
  401. Tarhan Yeşim, Şahin Remzi (2021-05)
    Fresh and Rheological Performances of Air-Entrained 3D Printable Mortars
  402. Chang Ze, Xu Yading, Chen Yu, Gan Yidong et al. (2021-05)
    A Discrete Lattice-Model for Assessment of Buildability Performance of 3D Printed Concrete
  403. Falliano Devid, Domenico Dario, Cosenza Paolo, Ricciardi Giuseppe et al. (2021-04)
    Green High-Performance Mortars for 3D Printing Applications
  404. Wang Li, Liu Yi, Yang Yu, Li Yanfeng et al. (2021-04)
    Bonding Performance of 3D Printing Concrete with Self-Locking Interfaces Exposed to Compression-Shear and Compression-Splitting Stresses
  405. Sun Jingting, Xiao Jianzhuang, Li Zhengrong, Feng Xiwen (2021-03)
    Experimental Study on the Thermal Performance of a 3D Printed Concrete Prototype Building
  406. Marais Hannelie, Christen Heidi, Cho Seung, Villiers Wibke et al. (2021-03)
    Computational Assessment of Thermal Performance of 3D Printed Concrete Wall Structures with Cavities
  407. Suntharalingam Thadshajini, Gatheeshgar Perampalam, Upasiri Irindu, Poologanathan Keerthan et al. (2021-02)
    Numerical Study of Fire and Energy Performance of Innovative Lightweight 3D Printed Concrete Wall-Configurations in Modular Building System
  408. Pessoa Ana Sofia, Guimarães Ana, Lucas Sandra, Simões Nuno (2021-02)
    3D Printing in the Construction Industry:
    A Systematic Review of the Thermal Performance in Buildings
  409. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2021-02)
    Fiber-Orientation Effects on Ultra-High-Performance Concrete Formed by 3D Printing
  410. Kristombu Baduge Shanaka, Navaratnam Satheeskumar, Zidan Yousef, McCormack Tom et al. (2021-01)
    Improving Performance of Additive Manufactured Concrete:
    A Review on Material Mix-Design, Processing, Inter-Layer Bonding, and Reinforcing-Methods
  411. Hou Shaodan, Duan Zhenhua, Xiao Jianzhuang, Ye Jun (2020-12)
    A Review of 3D Printed Concrete:
    Performance-Requirements, Testing Measurements and Mix-Design
  412. Gu Hai, Sun Jianhua, Zhang Jie, Xu Yuanyuan et al. (2020-12)
    Effect of Material-Ratio on the Performances in 3D Cement Printing and Its Optimization
  413. Sun Xiaoyan, Gao Chao, Wang Hailong (2020-10)
    Bond-Performance Between BFRP-Bars and 3D Printed Concrete
  414. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2020-10)
    Development of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction
  415. Arunothayan Arun, Nematollahi Behzad, Sanjayan Jay, Ranade Ravi et al. (2020-07)
    Quantitative Evaluation of Orientation of Steel-Fibers in 3D Printed Ultra-High-Performance Concrete
  416. Esposito Laura, Menna Costantino, Asprone Domenico, Rossino Chiara et al. (2020-07)
    An Experimental Testing Procedure to Assess the Buildability Performance of 3D Printed Concrete Elements
  417. Mohammad Malek, Masad Eyad, Seers Thomas, Ghamdi Sami (2020-07)
    High-Performance Lightweight Concrete for 3D Printing
  418. Vantyghem Gieljan, Steeman Marijke, Corte Wouter, Boel Veerle (2020-07)
    Design-Optimization for 3D Concrete Printing:
    Improving Structural and Thermal Performances
  419. Guamán-Rivera Robert, García-Alvarado Rodrigo, Martínez-Rocamora Alejandro, Cheein Fernando (2020-05)
    A Comprehensive Performance Evaluation of Different Mobile Manipulators Used as Displaceable 3D Printers of Building Elements for the Construction Industry
  420. Chougan Mehdi, Ghaffar Seyed, Jahanzat Mohammad, Albar Abdulrahman et al. (2020-04)
    The Influence of Nano-Additives in Strengthening Mechanical Performance of 3D Printed Multi-Binder Geopolymer Composites
  421. Pham Luong, Tran Jonathan, Sanjayan Jay (2020-04)
    Steel-Fiber-Reinforced 3D Printed Concrete:
    Influence of Fiber Sizes on Mechanical Performance
  422. Kosson Michael, Brown Lesa, Sanchez Florence (2020-01)
    Early-Age Performance of 3D Printed Carbon-Nano-Fiber and Carbon Micro-Fiber Cement Composites
  423. Siddika Ayesha, Mamun Md., Ferdous Wahid, Saha Ashish et al. (2019-12)
    3D Printed Concrete:
    Applications, Performance, and Challenges
  424. Arunothayan Arun, Nematollahi Behzad, Bong Shin, Ranade Ravi et al. (2019-09)
    Hardened Properties of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction Applications
  425. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-09)
    Quantifying Constructability Performance of 3D Concrete Printing via Rheology-Based Analytical Models
  426. Sanguinetti Paola, Almazam Khaled, Humaidan Omar, Colistra Joe et al. (2019-09)
    Evaluating the Potential of High-Performance Concrete 3D Printed Affordable Zero Energy Homes
  427. Markin Slava, Nerella Venkatesh, Schröfl Christof, Guseynova Gyunay et al. (2019-07)
    Material-Design and Performance-Evaluation of Foam-Concrete for Digital Fabrication
  428. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-07)
    3D Concrete Printing:
    A Lower-Bound Analytical Model for Buildability-Performance-Quantification
  429. Zhang Xun, Flood Ian, Zhang Yuanxin, Moud Hashem et al. (2019-06)
    A Cost-Model to Evaluate the Economic Performance of Contour Crafting
  430. Lafhaj Zoubeir, Dakhli Zakaria (2019-04)
    Performance Indicators of Printed Construction Materials:
    A Durability-Based Approach
  431. Lauff Philipp, Fischer Oliver (2019-04)
    Efficient Ultra-High Performance Concrete with Innovative Trajectory-Oriented "Reinforcement"
  432. Gaudillière-Jami Nadja, Duballet Romain, Bouyssou Charles, Mallet Alban et al. (2019-02)
    Building Applications Using Lost Formworks Obtained Through Large-Scale Additive Manufacturing of Ultra-High-Performance Concrete
  433. Kazemian Ali, Yuan Xiao, Meier Ryan, Khoshnevis Behrokh (2019-02)
    Performance-Based Testing of Portland Cement Concrete for Construction-Scale 3D Printing
  434. Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
    Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing
  435. Weng Yiwei, Li Mingyang, Liu Zhixin, Lao Wenxin et al. (2018-12)
    Printability and Fire Performance of a Developed 3D Printable Fiber-Reinforced Cementitious Composites under Elevated Temperatures
  436. Gaudillière-Jami Nadja, Duballet Romain, Bouyssou Charles, Mallet Alban et al. (2018-09)
    Large-Scale Additive Manufacturing of Ultra-High-Performance Concrete of Integrated Formwork for Truss-Shaped Pillars
  437. Kazemian Ali, Yuan Xiao, Meier Ryan, Khoshnevis Behrokh (2018-09)
    A Framework for Performance-Based Testing of Fresh Mixtures for Construction-Scale 3D Printing
  438. Yu Jing, Leung Christopher (2018-09)
    Impact of 3D Printing-Direction on Mechanical Performance of Strain-Hardening Cementitious Composite (SHCC)
  439. Moini Mohamadreza, Olek Jan, Youngblood Jeffrey, Magee Bryan et al. (2018-08)
    Additive Manufacturing and Performance of Architectured Cement-Based Materials
  440. Weng Yiwei, Qian Shunzhi, He Lewei, Li Mingyang et al. (2018-05)
    3D Printable High-Performance Fiber-Reinforced Cementitious Composites For Large-Scale Printing
  441. Lim Jian, Weng Yiwei, Li Mingyang (2018-05)
    Effect of Fiber-Reinforced Polymer on Mechanical Performance of 3D Printed Cementitious Material
  442. Lin Jia, Wu Xiong, Yang Wen, Zhao Ri et al. (2018-02)
    The Influence of Fine Aggregates on the 3D Printing Performance
  443. Suiker Akke (2018-01)
    Mechanical Performance of Wall Structures in 3D Printing Processes:
    Theory, Design Tools and Experiments
  444. Dubois Vincent, Leblanc Alexandre, Carpentier Olivier, Alhaik Ghaith et al. (2018-01)
    Performances of Flax Shive-Based Lightweight Composites with Rapid Hardening
  445. Panda Biranchi, Paul Suvash, Tan Ming (2017-07)
    Anisotropic Mechanical Performance of 3D Printed Fiber-Reinforced Sustainable Construction-Material
  446. Zuo Zibo, Gong Jian, Huang Yulin (2017-07)
    Performance of 3D Printing in Construction by Using Computer-Control-Technology
  447. Nam Young, Park Ji, Yoon Seung, Lim Yun (2016-06)
    3D Printing of Fibers and Reinforcements for Cementitious Composites to Maximize the Fracture-Resisting Performance of FRCCs
  448. Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
    Large-Scale 3D Printing of Ultra-High-Performance Concrete:
    A New Processing Route for Architects and Builders
  449. Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
    Mix-Design and Fresh Properties for High-Performance Printing Concrete
  450. Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
    Hardened Properties of High-Performance Printing Concrete