Skip to content

#height

Keywords by Co - Occurrence

  1. Zhang Xin, Xu Xinglong, Liu Xianda, Sun Junbo et al. (2026-01)
    Enhancing Electromagnetic Wave Absorption in 3D-Printed Concrete with Superabsorbent Polymers for High Performance
  2. Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2026-01)
    Enhancing Fiber Alignment and Tensile Properties of 3D-Printed Ultra-High Performance Strain-Hardening Cementitious Composites by Nozzle Channel Design
  3. Meibodi Mania, Kamhawi Abdallah, Foroughi Dehnavi Ashkan, Li Yichuan (2026-01)
    Non-Planar Slicing for High-Genus Surfaces with Non-Coplanar Interfaces
  4. Wen Kuo-Wei, Su Yen-Fang, Mo Kim, Hung Chung-Chan (2025-12)
    Time-Dependent Rheology, Green Strength, and Buildability of 3D-Printed Ultra-High Performance Concrete Incorporating Various Fiber Types and Contents
  5. Feng Hu, Yuan Xiang, Yu Zhenyu, Guo Aofei et al. (2025-12)
    Printability and Rheological Properties of 3D Printing Ultra-High Ductility Magnesium Phosphate Cement-Based Composites
  6. Si Wen, Khan Mehran, McNally Ciaran (2025-11)
    Rheological Optimization and Mechanical Performance Assessment of High-Volume GGBS-Silica Fume Mortars for 3D Printing
  7. Sičáková Alena, Verčimák Dominik (2025-11)
    Lightweight Mixtures with a High Proportion of Recycled Fillers in Terms of 3D Printing Parameters
  8. Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-11)
    Multi-Scale Analysis of 3D Printable High-Strength Engineered Cementitious Composite with Carbon and Polyethylene Fibers:
    Rheology, Printability and Hydration Kinetics in Structural Components
  9. Zhang Hui, Wu Jie, Huang Bo-Tao, Yu Rena et al. (2025-11)
    Cross-Scale Mechanisms of Anisotropy in 3D-Printed Ultra-High-Performance Concrete
  10. Chen Wenguang, Yu Jie, Ye Junhong, Yu Jiangtao et al. (2025-11)
    3D Printed High-Performance Fiber-Reinforced Cementitious Composites:
    Fresh, Mechanical, and Microstructural Properties
  11. Das Jyotish, Pratama M., Nematollahi Behzad, Guadagnini Maurizio (2025-10)
    Durability Performance of 3D-Printed Ultra-High Strength Concrete Incorporating Corrosion Inhibitor
  12. Marrero-Rosa Raul, Gomaa Shady, Irizarry Elmer, Ahmed Hassan et al. (2025-10)
    Additive Manufacturing of Ultra-High-Performance Concrete:
    From Mechanical Characterization to Large-Scale Application
  13. Lale Erol, Ayhan Bahar, Ahmed Ayesha, Irizarry Elmer et al. (2025-10)
    Computational Simulations Fresh-to-Solid Transition for Additive Manufacturing of Ultra-High-Performance Fiber Reinforced Concrete
  14. Tarhan Yeşim, Atalay Berrin (2025-09)
    Phosphogypsum and Borogypsum as Additives for Sustainable and High-Performance 3D-Printable Concrete
  15. Nasr Ahmed, Wang Jiyuan, Duan Zhenhua, Deng Qi et al. (2025-09)
    Assessing the Visibility and Impact of Recycled High-Density Polyethylene Fibers in 3D-Printed Cementitious Composites
  16. Ding Tao, Zhu Ruitao, Huang Zhangshuo (2025-09)
    Experimental Study on the Steel Fiber Orientational Distribution of Extrusion-Based 3D-Printed Ultra High-Performance Concrete
  17. Alonso-Cañon Sara, Blanco-Fernandez Elena, Cuesta-Astorga Eva, Indacoechea-Vega Irune et al. (2025-09)
    Selection of the Best 3D Printing High-Performance Mortars Using Multi-Criteria Analysis
  18. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun (2025-09)
    Development of Sustainable 3D Printing Concrete Materials:
    Impact of Natural Minerals and Wastes at High Replacement Ratios
  19. Du Guoqiang, Deng Xiaowei, Qian Ye (2025-09)
    Biomimetic 3D Printed Herringbone-Bouligand Cementitious Composites for Ultra-High Impact Performance
  20. Bai Gang, Wang Li, Li Zhijian, Qu Yao et al. (2025-09)
    Integrating Prestress into 3D Printed Ultra-High Performance Concrete Composite Beams for Superior Flexural Performance
  21. Daungwilailuk Totsawat, Pheinsusom Phoonsak, Pansuk Withit (2025-09)
    Behavior of 3D Printed Concrete Walls Exposed to High Temperatures
  22. Wang Xiaoqi, Liu Xing, Xu Yanling, Cao Jianfu et al. (2025-08)
    A General Adaptive Layer Height Continuous Path Planning Algorithm for Concrete 3D Printing of Complex Porous Structures Based on Multi-Objective Optimization and Reinforcement Learning
  23. Dong Enlai, Jia Zijian, Rao Suduan, Jia Lutao et al. (2025-08)
    Fiber Alignment Mechanism in 3D-Printed Ultra-High Performance Concrete Based on Fluid Dynamics Theory
  24. Si Wen, Khan Mehran, McNally Ciaran (2025-08)
    Effect of Nano Silica with High Replacement of GGBS on Enhancing Mechanical Properties and Rheology of 3D Printed Concrete
  25. Medeiros Fernanda, Anjos Marcos, Maia José, Dias Leonardo et al. (2025-08)
    Effect of Sisal Fibers on the Behavior of 3D-Printed Cementitious Mixtures Exposed to High Temperatures
  26. Ravichandran Darssni, Prem Prabhat, Bhaskara Gollapalli, Maheswaran Srinivasan et al. (2025-07)
    Time-Dependent Properties of 3D Printable Plain and Fibered High Strength Concrete Incorporating Copper Slag as an Alternate Fine Aggregate
  27. Ishikawa Shinichi, Yamada Ryo, Tasaki Ryosuke (2025-07)
    High-Sensitivity Interlayer Force Measurement and Multi-Layer Smoothing Control for 3D Printing on Uneven Surfaces
  28. Ingle Vaibhav, Prem Prabhat (2025-07)
    Acoustic Emission Examination of 3D Printed Ultra-High Performance Concrete with and Without Coarse Aggregate Under Fresh and Hardened States
  29. Dong Liang, Wu Chengqing, Liu Zhongxian, Wu Pengtao et al. (2025-07)
    Chloride Transport Anisotropy and Interfacial Degradation in 3D-Printed Ultra-High-Performance Concrete:
    Multi-Scale Evaluation and Engineering Implications
  30. Ma Jinyi, Zhang Haiyan, Wang Yanzhi, Xiong Lu et al. (2025-07)
    Effect of Clay Brick Powder and Recycled Fine Aggregates on Properties of 3D Printed Concrete After High Temperature Exposure
  31. Wang Tongcai, Gu Guangshuai, Zhang Rihan, Cui Qianshun et al. (2025-07)
    Additive Manufacturing of Lunar Regolith via Resin-Based Binder and Material Extrusion Method for High-Performance In-Situ Manufacturing on the Moon
  32. Kontovourkis Odysseas, Georgiou Christos, Andreou Alexis, Andreou Vasilis et al. (2025-06)
    Measuring and Evaluating Layer Height to Width Ratio in 3DCP Towards Higher Geometric Conformity
  33. Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-06)
    Enhancing Interfacial Bonding and Pore Structure Optimization in 3D-Printed High-Strength ECC with Steel-PE Hybrid Fibers
  34. Zuo Zibo, Huang Yulin, Tao Yaxin, Yong Yuan et al. (2025-06)
    Analysis of Factors Influencing the Maximum Continuous Printing Height of 3D Printed Concrete
  35. Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2025-06)
    Effects of Nozzle Thickness on the Mechanical Properties of 3D Printable Ultra-High Performance Strain-Hardening Cementitious Composites (UHP-SHCC)
  36. Lyu Xin, Ayough Pouria, Nawaz Waleed, Elchalakani Mohamed (2025-06)
    Development and Characterization of Printable Rubberised Ultra-High-Performance Concrete
  37. Su Yanli, Wu Chang, Shang Jiaqi, Zhang Pu (2025-06)
    Mechanical Properties of 3D-Printed High-Ductility Cementitious Composite with Sulphoaluminate Cement and Modified Crumb Rubber
  38. Trung Hieu Nguyen, Minh Trieu Nguyen, Dang Tri, Thinh Nguyen (2025-05)
    Advanced Sliding Mode Control Strategy for High-Performance 3D Concrete Printing
  39. Geng Songyuan, Cheng Boyuan, Long Wujian, Luo Qiling et al. (2025-05)
    Co-Driven Physics and Machine Learning for Intelligent Control in High-Precision 3D Concrete Printing
  40. Yang Shutong, Chen Zhengyuan, Lan Tian, Yang Tiange (2025-05)
    Quantitative Evaluation for Fracture Properties of 3D Printed Ultra-High-Performance Concrete Loaded in Different Directions
  41. Zhou Zhuang, Shi Xinyu, Zhou Haining, Liang Yuan et al. (2025-05)
    Research on 3DPC Construction Method for Structural High-Performance Component Generation
  42. Ayhan Bahar, Irizarry Elmer, Lale Erol, Yu Ke et al. (2025-04)
    Numerical Simulation of 3D Printed Ultra High-Performance Concrete Using the Lattice Discrete Particle Model
  43. Shi Ye, Han Li, Wu Pengtao, Dai Kaichao et al. (2025-04)
    Design of 3D Printing Green Ultra-High Performance Concrete Based on Binder System Optimization
  44. Li Hualong, Shi Ye, Rong Hui, Dai Kaichao (2025-03)
    Effect of Additives on the Performance of 3D-Printing Ultra-High Performance Concrete
  45. Zat Tuani, Schuster Sílvio, Schmitt Duarte Ester, Freitas Daudt Natália et al. (2025-03)
    Rheological Properties of High-Performance Concrete Reinforced with Microfibers and Their Effects on 3D Printing Process
  46. Yuan Hanquan, Dong Enlai, Jia Zijian, Jia Lutao et al. (2025-03)
    The Influence of Pore Structure and Fiber Orientation on Anisotropic Mechanical Property of 3D Printed Ultra-High-Performance Concrete
  47. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Feys Dimitri et al. (2025-03)
    Evaluation of Fresh Properties of High Calcium Content Fly Ash-Based Alkali-Activated 3D-Printed Mortar
  48. Bakhshi Amir, Zafar Muhammad, Hojati Maryam (2025-02)
    A Study on Achieving High Tensile Ductility in 3D-Printable Engineered Cementitious Composites Reinforced with 8mm Fibers
  49. Bayat Hamid, Karimpouli Sagegh, Yang Liming, Ramandi Hamed et al. (2025-02)
    Investigation of Interlayer Bonding and Pore Characteristics in 3D-Printed High-Strength Mortar Incorporating Recycled Lightweight Aggregates
  50. Zeng Jun-Jie, Sun Hou-Qi, Deng Run-Bin, Yan Zitong et al. (2025-02)
    Bond Performance Between FRP-Bars and 3D-Printed High-Performance Concrete
  51. Dong Enlai, Yuan Hanquan, Chen Yu, Jia Lutao et al. (2025-01)
    Printing Large-Size Eggshell-Shaped Elements with Ultra-High-Performance Concrete:
    From Material-Design to Structural Bearing-Capacity-Assessment
  52. Chen Meng, Li Jiahui, Zhang Tong, Zhang Mingzhong (2025-01)
    3D Printability of Recycled Steel-Fiber-Reinforced Ultra-High-Performance Concrete
  53. Yan Yufei, Zhang Mo, Ma Guowei, Sanjayan Jay (2024-12)
    An Eco-Friendly Ultra-High-Performance Geopolymer Concrete with Quaternary Binders for 3D Printing
  54. Liu Junxing, Li Peiqi, Piao Taiyan, Im Sumin et al. (2024-12)
    High-Alumina Cementitious Materials for Binder-Jetting 3D Printing:
    Exploring Suitable Mixing-Ratio and Curing-Solution for Improving Mechanical Properties and Hydration-Reaction
  55. Zhang Yu, Yu Zhengxing, Zhang Yunsheng, Zhang Jiufu et al. (2024-12)
    Study on the Predictive Model for Continuous Build-Height of 3D Printed Concrete Based on Printability and Early Mechanical Properties
  56. Zhao Hongyu, Sun Junbo, Wang Xiangyu, Wang Yufei et al. (2024-12)
    Real-Time and High-Accuracy Defect Monitoring for 3D Concrete Printing Using Transformer Networks
  57. Luo Surong, Jin Wenhao, Wu Weihong, Zhang Kaijian (2024-11)
    Rheological and Mechanical Properties of Polyformaldehyde-Fiber-Reinforced 3D Printed High-Strength Concrete with the Addition of Fly-Ash
  58. Vasey Lauren, Chadha Kunaljit, Kango Ananya, Leung Victor et al. (2024-11)
    Impact Printing:
    A Novel Robotic Additive Manufacturing Method for Circular, High-Volume Construction
  59. Gomaa Shady, Irizarry Elmer, Ahmed Ayesha, Rosa Raul et al. (2024-11)
    3D Printing of Ultra-High-Performance Concrete:
    Shape Stability for Various Printing Systems
  60. Sadeghzadeh Benam Shaghayegh, Sandalci Ilgin, Kara Burhan, Bebek Özkan et al. (2024-11)
    Improving the 3D Printability of High-Volume Fly-Ash Mixtures Through Addition of Mineral Admixtures
  61. Zeng Jun-Jie, Hu Xianwen, Sun Hou-Qi, Liu Yue et al. (2024-10)
    Triaxial Compressive Behavior of 3D Printed PE-Fiber-Reinforced Ultra-High-Performance Concrete
  62. Yang Yekai, Zhang Chiyu, Liu Zhongxian, Dong Liang et al. (2024-10)
    Effect of Hydration Process on the Inter-Layer Bond Tensile Mechanical Properties of Ultra-High-Performance Concrete for 3D Printing
  63. Lin Yini, Yan Jiachuan, Sun Ming, Han Xiaoyu et al. (2024-10)
    Inter-Layer Cohesion in 3D Printed Concrete:
    The Role of Width-to-Height-Ratio in Modulating Transport Properties and Pore-Structure
  64. Dong Enlai, Jia Zijian, Jia Lutao, Rao Suduan et al. (2024-10)
    Modeling Fiber-Alignment in 3D Printed Ultra-High-Performance Concrete Based on Stereology-Theory
  65. Althoey Fadi, Zaid Osama, Ahmed Bilal, Elhadi Khaled (2024-10)
    Impact of Double Hooked Steel-Fibers and Nano-Kaolin-Clay on Fresh Properties of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete
  66. Shahib Al Bari M., Ekaputri Januarti (2024-09)
    The Effect of Fiber on the Green Strength and Buildability of High-Strength 3D Printing Concrete
  67. He Lewei, Pan Jiahui, Hee Yu, Chen Hao et al. (2024-09)
    Development of Novel Concave and Convex Trowels for Higher Inter-Layer Strength of 3D Printed Cement-Paste
  68. Chougan Mehdi, Skibicki Szymon, Noaimat Yazeed, Federowicz Karol et al. (2024-09)
    Comparative Analysis of Ternary Blended Cement with Clay and Engineering-Brick-Aggregate for High-Performance 3D Printing
  69. Abstoß Marvin, Funke Henrik, Gelbrich Sandra (2024-09)
    Production of High-Precision Formwork Elements Using Parametrically Programmed Concrete-Extrusion and Machining
  70. Ahmed Ahmed, Rosa Raul, Gomaa Shady, Irizarry Elmer et al. (2024-09)
    Rheological Characterization of Nano-Modified Ultra-High-Performance Concrete for 3D Printing
  71. Irizarry Elmer, Gomaa Shady, Rosa Raul, Ahmed Ayesha et al. (2024-09)
    Mechanical Characterization of 3D Printed Ultra-High-Performance Concrete
  72. Sadeghzadeh Benam Shaghayegh, Sandalci Ilgin, Bundur Zeynep, Bebek Özkan (2024-09)
    Bio-Based Additives to Improve the Rheology of High-Volume Fly-Ash Cement-Based Mortar for 3D Printing
  73. Yao Yiming, Zhang Jiawei, Sun Yuanfeng, Pi Yilin et al. (2024-08)
    Mechanical Properties and Failure Mechanism of 3D Printing Ultra-High-Performance Concrete
  74. Fernand Muhirwa, Li Yaqi, Qian Qiwei, Chi Yin et al. (2024-08)
    Effects of Coarse Aggregates on 3D Printability and Mechanical Properties of Ultra-High-Performance Fiber-Reinforced Concrete
  75. Liu Xiongfei, Cai Huachong, Sun Yuhang, Wang Li et al. (2024-08)
    Spray-Based 3D Printed Foam-Concrete:
    Cooperative Optimization for Lightweight and High-Strength Performance
  76. Hutyra Adam, Bańkosz Magdalena, Tyliszczak Bożena (2024-08)
    Technology for Automated Production of High-Performance Building Compounds for 3D Printing
  77. Sucharda Oldřich, Gandel Radoslav, Cmiel Petr, Jeřábek Jan et al. (2024-07)
    Utilization of High-Performance Concrete Mixtures for Advanced Manufacturing Technologies
  78. Lu Bing, Li Mingyang, Qian Shunzhi, Li King et al. (2024-07)
    High-Performance 3D Concrete Printing with Zeolite
  79. Şahin Hatice, Mardani Ali, Mardani Naz (2024-07)
    Performance Requirements and Optimum Mix Proportion of High-Volume Fly-Ash 3D Printable Concrete
  80. Bai Gang, Guan Jingyuan, Wang Li, Li Zhijian et al. (2024-07)
    Bending Performance of 3D Printed Ultra-High-Performance Concrete Composite Beams
  81. Lee Yoon, Lee Sang, Kim Jae, Jeong Hoseong et al. (2024-07)
    Inter-Layer Bond Strength of 3D Printed Concrete Members with Ultra-High-Performance Concrete Mix
  82. Aslani Farhad, Zhang Yifan (2024-06)
    Sustainable 3D Printed Concrete Structures Using High-Quality Secondary Raw Materials
  83. Dong Liang, Yang Yekai, Liu Zhongxian, Zhang Yan et al. (2024-06)
    Interface Bonding Characteristics of 3D Printed Ultra-High-Performance Concrete After Elevated Temperatures
  84. Raval Amitkumar, Patel C. (2024-05)
    The Influence of Accelerators on Compressive Strength and Setting-Time of Cement to Achieve High Early Strength for 3D Concrete Printing Technology
  85. Jia Zijian, Kong Lingyu, Jia Lutao, Ma Lei et al. (2024-04)
    Printability and Mechanical Properties of 3D Printing Ultra-High-Performance Concrete Incorporating Limestone-Powder
  86. Jia Zijian, Zhou Mengting, Chen Yu, Wang Wei et al. (2024-03)
    Effect of Steel-Fiber Shape and Content on Printability, Microstructure and Mechanical Properties of 3D Printable High-Strength Cementitious Materials
  87. Shahzad Qamar, Abbas Nadeem, Akbar Muhammad, Sabi Ehab et al. (2024-03)
    Influence of Print-Speed and Nozzle-Diameter on the Fiber-Alignment in 3D Printed Ultra-High-Performance Concrete
  88. Gou Hongxiang, Sofi Massoud, Zhang Zipeng, Zhu Mintao et al. (2024-03)
    Combined Printable and Mechanical Analysis of 3D Printed Green High-Strength, Lightweight Engineered Cementitious Composites
  89. Colyn Markus, Zijl Gideon, Babafemi Adewumi (2024-02)
    Fresh and Strength Properties of 3D Printable Concrete Mixtures Utilising a High Volume of Sustainable Alternative Binders
  90. Liu Xiongfei, Cai Huachong, Ma Guowei, Hou Guanyu (2024-01)
    Spray-Based 3D Concrete Printing-Parameter Design-Model:
    Actionable Insight for High Printing Quality
  91. Özalp Fatih (2024-01)
    Mechanical Behavior and Permeability Properties of Sustainable and High-Performance Anisotropic Three-Dimensional Printable Concrete
  92. Li Zihan, Liu Huanbao, Nie Ping, Cheng Xiang et al. (2023-12)
    Mechanical Properties of Concrete Reinforced with High-Performance Micro-Particles for 3D Concrete Printing
  93. Yan Zitong, Zeng Jun-Jie, Zhuge Yan, Liao Jinjing et al. (2023-12)
    Compressive Behavior of FRP-Confined 3D Printed Ultra-High-Performance Concrete Cylinders
  94. Qiu Minghong, Sun Yan, Qian Ye (2023-12)
    Interfacial Bonding Performance of 3D Printed Ultra-High-Performance Strain-Hardening Cementitious Composites and Cast Normal Concrete
  95. Nair Sooraj, Tripathi Avinaya, Neithalath Narayanan (2023-11)
    Constitutive Response and Failure Progression in Digitally Fabricated 3D Printed Concrete Under Compression and Their Dependence on Print Layer-Height
  96. Vignesh B., Parthasarathi N. (2023-11)
    Analytical Study on 3D Printed Concrete Wall with Different Wall-Configurations When Exposed to High Temperature
  97. Sun Houchao, Li Furong, Shi Feiting (2023-10)
    Experimental Study on Dynamic Mechanical Properties of 3D Printed Cement-Based Materials Under Splitting Tension After High Temperature
  98. Ingle Vaibhav, Prem Prabhat, Ramamurthy Vignesh, Ravichandran Darssni (2023-09)
    Acoustic Emission Characterization of 3D Printed Ultra-High-Performance Concrete Beams Under Bending
  99. Ramamurthy Vignesh, Prem Prabhat, Ingle Vaibhav, Giridhar Greeshma (2023-09)
    Fracture Characterization of 3D Printed Ultra-High-Performance Fiber Concrete Beams Using Acoustic Emission
  100. Olczyk Norbert, Skibicki Szymon, Gierszewska Natalia (2023-08)
    3D Printed Mortar with High Alumina-Cement as Alternative Solution for Standard Materials Used for 3D Printing
  101. Fragnito Andrea, Iasiello Marcello, Mauro Gerardo, Menna Costantino et al. (2023-08)
    Topology-Optimization to Design Innovative High Thermal Resistance 3D Printed Walls
  102. Surehali Sahil, Tripathi Avinaya, Neithalath Narayanan (2023-08)
    Anisotropy in Additively Manufactured Concrete Specimens Under Compressive Loading:
    Quantification of the Effects of Layer-Height and Fiber-Reinforcement
  103. Salah Husam, Mutalib Azrul, Kaish Amrul, Syamsir Agusril et al. (2023-07)
    Development of Ultra-High-Performance Silica-Fume-Based Mortar Incorporating Graphene-Nano-Platelets for 3D Concrete Printing Application
  104. Bai Gang, Chen G., Li Rong, Wang Li et al. (2023-07)
    3D Printed Ultra-High-Performance Concrete:
    Preparation, Application, and Challenges
  105. Robayo-Salazar Rafael, Martínez Fabio, Vargas Armando, Gutiérrez Ruby (2023-06)
    3D Printing of Hybrid Cements Based on High Contents of Powders from Concrete, Ceramic and Brick Waste Chemically Activated with Sodium Sulphate (Na2SO4)
  106. Neef Tobias, Kalthoff Matthias, Müller Steffen, Backes Jana et al. (2023-06)
    Extrusion of High Yield Strength Carbon-Reinforced Concrete with Mineral Impregnated Rovings
  107. Fan Dingqiang, Zhu Jinyun, Fan Mengxin, Lu Jianxian et al. (2023-04)
    Intelligent Design and Manufacturing of Ultra-High-Performance Concrete:
    A Review
  108. Razzaghian Ghadikolaee Mehrdad, Cerro-Prada Elena, Pan Zhu, Korayem Asghar (2023-04)
    Nanomaterials as Promising Additives for High-Performance 3D Printed Concrete:
    A Critical Review
  109. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2023-03)
    Developing 3D Printable and Buildable Limestone-Calcined-Clay-Based Cement Composites with Higher Aggregate Content
  110. Luo Surong, Lin Qian, Xu Wei, Wang Dehui (2023-03)
    Effects of Interval Time and Interfacial Agents on the Mechanical Characteristics of Ultra-High-Toughness Cementitious Composites Under 3D Printed Technology
  111. Chaiyotha Danai, Kantawong Watcharapong, Payakanitia Panjasila, Pinitsoontorn Supree et al. (2023-03)
    Finding Optimized Conditions for 3D Printed High-Calcium Fly-Ash-Based Alkali-Activated Mortar
  112. Ma Xiaosong, Tan Linzhen, Lu Yuanjing, Yao Wu et al. (2023-03)
    Upcycling of Waste Plasterboard for the Synthesis of High-Quality Gypsum-Based 3D Printing-Powder
  113. Yang Yekai, Wu Chengqing, Liu Zhongxian (2023-01)
    Rate-Dependent Behavior of 3D Printed Ultra-High-Performance Fiber-Reinforced Concrete Under Dynamic Splitting Tensile
  114. Arunothayan Arun, Sanjayan Jay (2023-01)
    Elevated Temperature Effects on 3D Printed Ultra-High-Performance Concrete
  115. Surehali Sahil, Tripathi Avinaya, Nimbalkar Atharwa, Neithalath Narayanan (2023-01)
    Anisotropic Chloride Transport in 3D Printed Concrete and Its Dependence on Layer-Height and Interface-Types
  116. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2022-12)
    Assessing Printing Synergism in a Dual 3D Printing System for Ultra-High-Performance Concrete In-Process Reinforced Cementitious Composite
  117. Arunothayan Arun, Nematollahi Behzad, Khayat Kamal, Ramesh Akilesh et al. (2022-11)
    Rheological Characterization of Ultra-High-Performance Concrete for 3D Printing
  118. Lu Bing, Li Hongliang, Li Mingyang, Wong Teck et al. (2022-11)
    Mechanism and Design of Fluid Catalytic Cracking Ash-Blended Cementitious Composites for High-Performance Printing
  119. Shkundalova Olena, Molkens Tom, Claßen Martin, Rossi Barbara (2022-09)
    Characterization of 3D Printed Concrete Beams After Exposure to High Temperature
  120. Game Daniel, Giwa Ilerioluwa, Ahmed Hassan, Noorvand Hassan et al. (2022-09)
    Development of Ultra-High-Performance Engineered Cementitious Composites for 3D Printing Applications
  121. Dong Liang, Yang Yekai, Liu Zhongxian, Ren Quanchang et al. (2022-07)
    Microstructure and Mechanical Behavior of 3D Printed Ultra-High-Performance Concrete after Elevated Temperatures
  122. Ma Guowei, Bai Gang, Wang Li, Wang Fang (2022-07)
    Explosion-Resistance of 3D Printing Ultra-High-Performance Concrete Based on Contact-Explosion Tests
  123. Ye Junhong, Weng Yiwei, Du Hongjian, Li Mingyang et al. (2022-06)
    Feasibility of Using Ultra-High-Ductile Concrete to Print Self-Reinforced Hollow Structures
  124. Wangler Timothy, Aguilar Sanchez Asel, Anton Ana-Maria, Dillenburger Benjamin et al. (2022-06)
    Two Year Exposure of 3D Printed Cementitious Columns in a High-Alpine Environment
  125. Roussel Nicolas, Buswell Richard, Ducoulombier Nicolas, Ivanova Irina et al. (2022-06)
    Assessing the Fresh Properties of Printable Cement-Based Materials:
    High-Potential Tests for Quality-Control
  126. Sergis Vasileios, Ouellet-Plamondon Claudiane (2022-04)
    D-Optimal Design of Experiments Applied to 3D High-Performance Concrete Printing Mix-Design
  127. Pan Tinghong, Jiang Yaqing, Ji Xuping (2022-03)
    Inter-Layer Bonding Investigation of 3D Printing Cementitious Materials with Fluidity-Retaining Polycarboxylate-Superplasticizer and High-Dispersion Polycarboxylate Superplasticizer
  128. Zhou Jiehang, Du Longyu, Lai Jianzhong, Wang Qiang et al. (2022-03)
    Preparation and High-Velocity Impact Experiment for Three-Dimensional-Printed Concrete
  129. Yang Yekai, Wu Chengqing, Liu Zhongxian, Li Jun et al. (2022-02)
    Characteristics of 3D Printing Ultra-High-Performance Fiber-Reinforced Concrete Under Impact Loading
  130. Cui Jinyang, He Zhen, Zhang Guozhi, Cai Xinhua (2022-01)
    Rheological Properties of Sprayable Ultra-High-Performance Concrete with Different Viscosity-Enhancing Agents
  131. Yang Yekai, Wu Chengqing, Liu Zhongxian, Zhang Hai (2021-12)
    3D Printing Ultra-High-Performance Fiber-Reinforced Concrete under Triaxial Confining Loads
  132. Nair Sooraj, Li Anling, Mobasher Barzin, Neithalath Narayanan (2021-12)
    Effect of Layer-Height on Tensile Stress-Distribution and Crack-Width and Propagation in 3D Printed Fiber-Reinforced Flexural Elements
  133. Jin Yuan, Zhou Xiaolong, Chen Mingxu, Zhao Zhihui et al. (2021-11)
    High-Toughness 3D Printed White Portland-Cement-Based Materials with Glass-Fiber-Textile
  134. Sun Xiaoyan, Zhou Jiawei, Wang Qun, Shi Jiangpeng et al. (2021-11)
    PVA-Fiber-Reinforced High-Strength Cementitious Composite for 3D Printing:
    Mechanical Properties and Durability
  135. Pham Luong, Panda Biranchi, Tran Jonathan (2021-11)
    Fresh and Hardened Properties of 3D Printable Polymer-Fiber-Reinforced High-Performance Cementitious Composite
  136. He Lewei, Tan Jolyn, Chow Wai, Li Hua et al. (2021-11)
    Design of Novel Nozzles for Higher Inter-Layer Strength of 3D Printed Cement-Paste
  137. Yang Yekai, Wu Chengqing, Liu Zhongxian, Wang Hailiang et al. (2021-10)
    Mechanical Anisotropy of Ultra-High-Performance Fiber-Reinforced Concrete for 3D Printing
  138. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Khayat Kamal et al. (2021-10)
    Digital Fabrication of Eco-Friendly Ultra-High-Performance Fiber-Reinforced Concrete
  139. Nair Sooraj, Tripathi Avinaya, Neithalath Narayanan (2021-09)
    Examining Layer-Height Effects on the Flexural and Fracture Response of Plain and Fiber-Reinforced 3D Printed Beams
  140. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2021-08)
    In-Process Reinforcing Method:
    Dual 3D Printing Procedure for Ultra-High-Performance Concrete Reinforced Cementitious Composites
  141. Wang Li, Ma Hui, Li Zhijian, Ma Guowei et al. (2021-07)
    Cementitious Composites Blending with High Belite-Sulfoaluminate and Medium-Heat Portland Cements for Large-Scale 3D Printing
  142. Shen Wenkai, Yuan Qiang, Shi Caijun, Ji Youhong et al. (2021-07)
    Influence of Pumping on the Resistivity Evolution of High-Strength Concrete and Its Relation to the Rheology
  143. Shen Wenkai, Shi Caijun, Khayat Kamal, Yuan Qiang et al. (2021-06)
    Change in Fresh Properties of High-Strength Concrete Due to Pumping
  144. Javed Ali, Mantawy Islam, Azizinamini Atorod (2021-05)
    3D Printing of Ultra-High-Performance Concrete for Robotic Bridge Construction
  145. Falliano Devid, Domenico Dario, Cosenza Paolo, Ricciardi Giuseppe et al. (2021-04)
    Green High-Performance Mortars for 3D Printing Applications
  146. Ye Junhong, Cui Can, Yu Jiangtao, Yu Kequan et al. (2021-02)
    Effect of Polyethylene-Fiber Content on Workability and Mechanical-Anisotropic Properties of 3D Printed Ultra-High-Ductile Concrete
  147. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2021-02)
    Fiber-Orientation Effects on Ultra-High-Performance Concrete Formed by 3D Printing
  148. Ye Junhong, Cui Can, Yu Jiangtao, Yu Kequan et al. (2021-01)
    Fresh and Anisotropic-Mechanical Properties of 3D Printable Ultra-High-Ductile Concrete with Crumb-Rubber
  149. Mohammed Alyaa, Saadi Nihad (2020-12)
    Ultra-High Early Strength Cementitious Grout Suitable for Additive Manufacturing Applications Fabricated by Using Graphene Oxide and Viscosity Modifying Agents
  150. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2020-10)
    Development of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction
  151. Chu Shaohua, Li Leo, Kwan Albert (2020-09)
    Development of Extrudable High-Strength Fiber-Reinforced Concrete Incorporating Nano-Calcium-Carbonate
  152. Arunothayan Arun, Nematollahi Behzad, Sanjayan Jay, Ranade Ravi et al. (2020-07)
    Quantitative Evaluation of Orientation of Steel-Fibers in 3D Printed Ultra-High-Performance Concrete
  153. Hack Norman, Kloft Harald (2020-07)
    Shotcrete 3D Printing Technology for the Fabrication of Slender Fully Reinforced Freeform Concrete Elements with High Surface Quality:
    A Real-Scale Demonstrator
  154. Mohammad Malek, Masad Eyad, Seers Thomas, Ghamdi Sami (2020-07)
    High-Performance Lightweight Concrete for 3D Printing
  155. Naboni Roberto, Breseghello Luca (2020-07)
    High-Resolution Additive Formwork for Building-Scale Concrete Panels
  156. Özalp Fatih, Yılmaz Halit (2020-03)
    Fresh and Hardened Properties of 3D High-Strength Printing Concrete and Its Recent Applications
  157. Kruger Jacques, Cho Seung, Zeranka Stephan, Vintila Cristian et al. (2019-12)
    3D Concrete Printer Parameter Optimization for High-Rate Digital Construction Avoiding Plastic Collapse
  158. Arunothayan Arun, Nematollahi Behzad, Bong Shin, Ranade Ravi et al. (2019-09)
    Hardened Properties of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction Applications
  159. Sanguinetti Paola, Almazam Khaled, Humaidan Omar, Colistra Joe et al. (2019-09)
    Evaluating the Potential of High-Performance Concrete 3D Printed Affordable Zero Energy Homes
  160. Zhu Binrong, Pan Jinlong, Nematollahi Behzad, Zhou Zhenxin et al. (2019-07)
    Development of 3D Printable Engineered Cementitious Composites with Ultra-High Tensile Ductility for Digital Construction
  161. Lauff Philipp, Fischer Oliver (2019-04)
    Efficient Ultra-High Performance Concrete with Innovative Trajectory-Oriented "Reinforcement"
  162. Gaudillière-Jami Nadja, Duballet Romain, Bouyssou Charles, Mallet Alban et al. (2019-02)
    Building Applications Using Lost Formworks Obtained Through Large-Scale Additive Manufacturing of Ultra-High-Performance Concrete
  163. Zhang Yu, Zhang Yunsheng, She Wei, Yang Lin et al. (2019-01)
    Rheological and Hardened Properties of the High-Thixotropy 3D Printing Concrete
  164. Panda Biranchi, Tan Ming (2018-11)
    Rheological Behavior of High-Volume Fly-Ash Mixtures Containing Micro-Silica for Digital Construction Application
  165. Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2018-11)
    Improving the 3D Printability of High-Volume Fly-Ash Mixtures via the Use of Nano-Attapulgite-Clay
  166. Gaudillière-Jami Nadja, Duballet Romain, Bouyssou Charles, Mallet Alban et al. (2018-09)
    Large-Scale Additive Manufacturing of Ultra-High-Performance Concrete of Integrated Formwork for Truss-Shaped Pillars
  167. Bard Joshua, Cupkova Dana, Washburn Newell, Zeglin Garth (2018-09)
    Thermally Informed Robotic Topologies:
    Profile 3D Printing for the Robotic Construction of Concrete Panels, Thermally Tuned Through High-Resolution Surface Geometry
  168. Vandenberg Aileen, Bessaies-Bey Hela, Wille Kay, Roussel Nicolas (2018-09)
    Enhancing Printable Concrete Thixotropy by High-Shear Mixing
  169. Weng Yiwei, Qian Shunzhi, He Lewei, Li Mingyang et al. (2018-05)
    3D Printable High-Performance Fiber-Reinforced Cementitious Composites For Large-Scale Printing
  170. Wolfs Robert, Bos Freek, Strien Emiel, Salet Theo (2017-06)
    A Real-Time Height Measurement and Feedback System for 3D Concrete Printing
  171. Hambach Manuel, Möller Hendrik, Neumann Thomas, Volkmer Dirk (2016-08)
    Portland-Cement-Paste with Aligned Carbon-Fibers Exhibiting Exceptionally High Flexural Strength (>100 MPa)
  172. Jeong Jae, Jang Kyong, Park Chan, Lee Seung et al. (2016-05)
    Effect of Admixtures on Pumpability for High-Strength Concrete
  173. Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
    Large-Scale 3D Printing of Ultra-High-Performance Concrete:
    A New Processing Route for Architects and Builders
  174. Perrot Arnaud, Mélinge Yannick, Rangeard Damien, Micaelli Francesca et al. (2012-06)
    Use of Ram Extruder as a Combined Rheo-Tribometer to Study the Behavior of High-Yield-Stress Fluids at Low Strain-Rate
  175. Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
    Mix-Design and Fresh Properties for High-Performance Printing Concrete
  176. Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
    Hardened Properties of High-Performance Printing Concrete