Skip to content

#sustainability

Keywords by Co - Occurrence

  1. Öztürk Ece, Borgianni Yuri, Ince Ceren (2026-04)
    A Database-Driven Study on Durability and Sustainability of 3D Concrete Printing Mixtures
  2. Ramakrishnan Sayanthan, Ramesh Akilesh, Pasupathy Kirubajiny, Mechtcherine Viktor et al. (2026-04)
    Enhancing the Printability and Sustainability of 3D Concrete Printing Using Recycled Waste Glass as a Cement Substitute
  3. Cadenazzi Thomas, Liu Kaimiao, Keles Busra (2026-04)
    Performance Evaluation of Novel 3D Printed Hemp-PLA Composites for Sustainable Concrete Reinforcement
  4. Wang Qian, Wang Li, Ma Guowei (2026-03)
    Advancing Sustainable Structures Through 3D Printed Concrete:
    Reinforcement Methods and Structural Design Philosophy
  5. Lu Pengyuan, Yang Yekai, Zhao Qingxin, Liu Zhongxian et al. (2026-03)
    Low-Carbon 3D-Printed Geopolymer Ultra-High-Strength Concrete Enabled by Soda Residue:
    Sustainable Development and Environmental Impact Assessment
  6. Ekinci Mehmet, Belendir Utku, Demiral Nazim, Şahin Oğuzhan et al. (2026-03)
    Sustainable Lightweight Thermal Insulating Geopolymer Mortars from End-of-Life Materials for 3D Printing.
  7. Amjad Umar, Irshidat Mohammad, Maurya Muni, Rizmin Khadeejath et al. (2026-03)
    Sustainable 3D Mortar Printing:
    Material Optimization and Ultrasonic Characterization for Enhanced Construction Performance
  8. Hinge Pawan, Bhagat Rajesh, Nandurkar Bhupesh, Pande Prashant et al. (2026-03)
    Sustainable 3D-Printed Concrete:
    Integrating E-Waste Plastics for Enhanced Printability, Mechanical Strength, and Long-Term Durability Sets
  9. Krishnaraja A., Kulanthaivel P., Manoharan Arunkumar, Muthusamy Suresh et al. (2026-03)
    Engineered Cementitious Composites with Nano Calcium Carbonate and Corona Waste Mask Fibers for Sustainable 3D Printing Applications
  10. Kolářová Mária, Kloužková Alexandra, Lauermannová Anna-Marie, Záleská Martina et al. (2026-03)
    Incorporation of Waste Glass Dust with Pigments Containing Cd, S, and Se into Magnesium Oxychloride Cement for Sustainable Production Using 3D Printing
  11. Lolli Francesca, Mehlomakulu Bungane, Azari Jafari Hessam, Kirchain Randolph et al. (2026-02)
    On the Sustainability of Digital Construction:
    Whole Building Life Cycle Carbon Emissions According to Three Construction Techniques
  12. Oh Gyujong, Oh Sangwoo, Choi Seongcheol (2026-02)
    Carbonated Basic Oxygen Furnace Slag Fine Aggregate in Concrete:
    Laboratory Assessment and Sustainable Application in 3D-Printed Concrete Components
  13. Wang Yu, Douba Ala, Rajendran Naveenkumar, Cubillos-Gamez David et al. (2026-02)
    Cellulose Nanofibers and Limestone Filler Enable High-Performance, Sustainable, and Cost-Efficient Printable Concrete
  14. Zhou Wenjuan, Yang Can, He Xiao, Zhou Mingli et al. (2026-02)
    Sustainably 3D-Printing Mortar with Construction Residue Sand:
    Printability, Mechanical Properties, and Microstructural Mechanisms
  15. Dey Dhrutiman, Panda Biranchi, Kole Jagabandhu (2026-02)
    Investigation into the Effect of Full Replacement with Portland Slag Cement and Screened Slag Sand for Development of Sustainable 3D Printed Concrete
  16. Javan Kazem, Chaggar Pooja, Darestani Mariam, Markhali Bijan et al. (2026-02)
    Workability of Geopolymer Concrete and Mortar Materials: A Systematic Review of Influencing Parameters and Optimization for Sustainable Construction Materials
  17. Tafur Ginette, Rivera Cristhofer, Torres Pablo (2026-02)
    Evaluation of Sustainable 3D Concrete with Partial Replacement of Fine Aggregate by PET and Addition of Coconut Fibers:
    Impact on Construction with the Use of 3D Gantry-Type Printers in Peru
  18. Paul Aranya, Manosalvas Holst Carlos, Berryman Charles, Friedland Carol et al. (2026-01)
    Development of Sustainable Low-Cement Construction 3D Printing Materials via Dense Particle Packing
  19. Sun Junbo, Wang Haihong, Zhang Yu, Liu Han et al. (2026-01)
    Sustainable Utilization of Waste in the 3D Printed Concrete
  20. Bugarin Juan, Hajjar Ayla, Ssengooba Aloysious, Rangel Bárbara et al. (2026-01)
    Advancing Circular Bioeconomy and Sustainable Construction in the Iberian Peninsula:
    Addressing the Potential of Timber Residues for 3D Printing
  21. Cunha Jaime, Rangel Bárbara, Vilas-Boas Rodrigo (2026-01)
    Evaluating the Environmental Efficiency of on-Site and Off-Site 3D Construction Printing:
    A Roadmap Towards Sustainable Building Practices
  22. Paul Suvash, Lee Junghyun, Tay Yi, Amr Issam et al. (2025-12)
    Developing Sustainable 3D Printable Concrete Materials Using Olivine Sand for Carbon Sequestration
  23. Aabbas Mohamed, Mazian Brahim, Ahachad Mohammed, Zoghlami Aya et al. (2025-12)
    Sustainable 3D Printed Clay Bricks Incorporating Coffee Waste:
    Toward Circular Economy in Construction
  24. Nguyen Vuong, Jie Cheah, Zhang Y., Wong Hong (2025-12)
    Effect of Infill Architecture on Structural Performance and Sustainability of 3D-Printed Reinforced Concrete Columns
  25. Wang Xiangyu, Li Baidian, Wu Fei, Gu Kan et al. (2025-12)
    Enhancing Interlayer Properties and Sustainability of 3D-Printed UHPC with Antimony Tailings
  26. Feliciano Renzo, Barrera Natalia, Lukyanenko Artyom, Rangel Bárbara et al. (2025-12)
    Sustainable Geometries:
    A Comparative Analysis of Thermal Performance in Uninsulated 3D Printed Concrete Wall Topologies
  27. Kovaleva Daria, Haufe Carl, Miller Olga, Gericke Oliver et al. (2025-12)
    Lightweight and Sustainable Construction with Concrete:
    The Role of Digital Design and Manufacturing Methods at ILEK
  28. Rangel Carolina, Salet Theo, Lucas Sandra (2025-12)
    A Design Methodology for Sustainable Lightweight 3D-Printable Concrete with SCMs
  29. Tinoco Matheus, Lima Moura Paiva Rayane, Andrade Luiza, Mendoza Reales Oscar (2025-12)
    Hybrid 3D Printable Mixtures Incorporating Fine Earth, Portland Cement, and Fly Ash:
    A Sustainable Alternative to Cement-Intensive Systems
  30. Cheng Zhangqi, Li Keyan, Liu Renlong (2025-12)
    Sustainable 3D Printed Engineered Cementitious Composites Incorporating Recycled Ceramic Materials:
    Rheology and Mechanical Behavior
  31. Özdemir Salih, Alaçam Sema (2025-11)
    Cognitive Ecosystem for Lifecycle-Adaptive and Sustainable 3D Concrete Printing
  32. Ebiloma David, Olatunbosun Olajumoke, Isang Inimbom, Aigbavboa Clinton (2025-11)
    Assessing the Effects of 3D-Printed Concrete for Sustainable Construction:
    The Stakeholders' Perspective
  33. Raza Ali, Tan Binglin, Jiajia Zhou, Umar Muhammad et al. (2025-11)
    Evaluation of Mechanical and Microstructural Properties of Sustainable 3D-Printed Engineered Cementitious Composites Incorporating Hybrid PE/PVA Fibers and Yellow River Sand
  34. Baah Thomas, Kim Heejeong, Latypov Marat (2025-11)
    Multi-Objective Adaptive Experimental Approach for Optimizing 3D Concrete Printing Mixtures and Parameters Incorporating Construction and Demolition Waste for Sustainable Construction
  35. Adeel Muhammad (2025-11)
    Three-Dimensional Concrete Printing for Sustainable Construction and Architecture:
    A Comprehensive Review
  36. Megahed Mai, Abou Zeid Mohamed (2025-11)
    Toward Sustainable 3D Concrete Printing:
    Assessment of SCM-Superplasticizer Interactions on Rheology and Buildability
  37. Changez Kashif, Aslam Jawad, Bhutta Muhammad, Butt Shahid (2025-11)
    Hybrid Additive Strategies for Sustainable 3D Concrete Printing:
    Balancing Printability, Early-Stage Strength, and Eco-Efficiency
  38. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa et al. (2025-11)
    Data-Driven Design of Sustainable LC³ for 3D Printing with Omani Clays
  39. Türk Ayşe, Türk Furkan, Edebali Serpil, Keskin Ülkü (2025-11)
    3D Printable Mortars with Green Materials:
    Sustainable Solutions with Nanocellulose
  40. Nair Sajitha, Nagarajan Praveen, Thampi Santosh, Das Sudha et al. (2025-10)
    Life Cycle-Based Sustainability Assessment of Optimized 3D Printable Concrete Mixes Incorporating Scms and Recycled Aggregates
  41. Garshasbi Sajad, Mousavi Seyed, Dehestani Mehdi, Nazarpour Hadi (2025-10)
    Sustainable Production of 3D Concrete Printing Using Agricultural Waste Fibers
  42. Matos Ana, Milheiro-Oliveira Paula, Pinto Nuno, Pimentel Mário (2025-10)
    Cementitious Mortars for Sustainable 3D Printing
  43. Paul Suvash, Lee Junghyun, Tay Yi, Lim Sean et al. (2025-10)
    Unlocking the Sustainable Potential of 3D Concrete Printing with Large Aggregates and Steam–CO2 Curing
  44. Valeri Manuela, Sangiorgio Valentino, Cantagallo Christina (2025-10)
    From Traditional Materials to Geopolymers:
    History, Performance, Sustainability and 3D Printing Applications
  45. Mesoudy Mouad, Foulki Rida, Amegouz Driss (2025-10)
    3D Concrete Printing:
    Optimizing the Design of Interlocking 3D Printed Concrete Blocks for Fast and Sustainable Construction
  46. Ding Yong, Kindler Robert, Cen Tianyu, Chen Xiulin et al. (2025-10)
    Valorization of Demolition Waste and Biomass Byproduct into Sustainable Building Materials via Carbon Mineralization and 3D Printing
  47. Sedighi Saeed, Rahai Alireza, Moodi Faramarz (2025-10)
    Multi-Criteria Optimization for Sustainable Concrete Mix Considering the Synergistic Effect of Recycled Steel Fiber and LC3 Concrete
  48. Varghese Renny, Rangel Bárbara, Maia Lino (2025-10)
    Strength, Structure, and Sustainability in 3D-Printed Concrete Using Different Types of Fiber Reinforcements
  49. Biernacki Joseph (2025-10)
    Sustainability of Additively Manufactured Cement-Based Housing:
    What's Our Next Move?
  50. Gonsalves Nicolas, Morgan Ashlei, Thiele Heidi, Olarra Andre et al. (2025-10)
    3D Printing of Sustainable Infrastructure Using Rapid-Set Clay Concrete with Biobased Additives
  51. Si Wen, Hopkins Ben, Khan Mehran, McNally Ciaran (2025-09)
    Towards Sustainable Mortar:
    Optimising Sika-Fiber Dosage in Ground Granulated Blast Furnace Slag and Silica Fume Blends for 3D Concrete Printing
  52. Tarhan Yeşim, Atalay Berrin (2025-09)
    Phosphogypsum and Borogypsum as Additives for Sustainable and High-Performance 3D-Printable Concrete
  53. Piechówka-Mielnik Magdalena, Bednarz Łukasz, Krupa Michał, Wojciechowska Gabriela et al. (2025-09)
    Sustainable Development in Building Engineering:
    Hempcrete in 3D Printing Technology
  54. Elhag Ahmed, Mabrouk Abdelkader, Ghazouani Nejib, Nasir Umara (2025-09)
    Advances in Sustainable 3D-Printed Geopolymer Concrete:
    Materials, Performance, and Environmental Impact in Next Generation Green Construction
  55. Marifah Sofa, Saputri Utamy, Permadi Dio (2025-09)
    Systematic Literature Review:
    3D Printing Technology for Sustainable Construction Innovation
  56. Kua Harn, Shi A., Kajandran V., Lam T. et al. (2025-09)
    Toward Sustainable Construction 3D Printing:
    Limestone and Non-Calcined Recycled Marine Clay as Partial Cement Replacement
  57. Li Leo, Fei Zuojie, Jiao Chujie, Luo Tao et al. (2025-09)
    Bauxite Residue-Based 3D Printing Mortar:
    Enhancing Performance and Sustainability Through the Paste Replacement Approach
  58. Ramirez Rodriguez Fatima, Ahmad Rafiq (2025-09)
    Sustainable Technology Advances for Additive Construction:
    A State-of-the-Art Review
  59. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun (2025-09)
    Development of Sustainable 3D Printing Concrete Materials:
    Impact of Natural Minerals and Wastes at High Replacement Ratios
  60. Kubjana Lucy, Aigbavboa Clinton, Adekunle Peter (2025-09)
    Advancing Sustainable 3D-Printed Concrete:
    A Bibliometric Study on Financing Housing Options
  61. Bhagat Rajesh, Pande Prashant, Madurwar Kamlesh, Raut Jayant et al. (2025-09)
    Life Cycle Assessment of 3D-Printed Building Materials Towards Sustainability-Driven Optimization and Environmental Impact Analysis Using Computational Intelligence Techniques
  62. Liu Shijie, Liu Tong, Alqurashi Muwaffaq, Abdou Elabbasy Ahmed et al. (2025-09)
    Advancing 3D-Printed Fiber-Reinforced Concrete for Sustainable Construction:
    A Comparative Optimization Based Study of Hybrid Machine Intelligence Models for Predicting Mechanical Strength and CO₂ Emissions
  63. Shukla Bishnu, Bharti Gaurav, Parashar Bhupender, Sharma Pushpendra et al. (2025-09)
    Variables Influencing the Performance of 3D Concrete Printing for Sustainable Construction:
    Current Status and Future Prospects
  64. Jankovský Ondřej, Lodňánek Petr, Lauermannová Anna-Marie, Jiříčková Adéla et al. (2025-08)
    Use of Ladle Furnace Slag as Filler Replacement in Magnesium Oxychloride Cement:
    Towards Sustainable 3D-Printable Building Composites
  65. Alonso-Cañon Sara, Alonso-Estebanez Alejandro, Yoris-Nobile Adrian, Brunčič Ana et al. (2025-08)
    Rheological Parameter Ranges for 3D Printing Sustainable Mortars Using a New Low-Cost Rotational Rheometer
  66. Banihashemi Saeed, Akbarnezhad Ali, Sheikhkhoshkar Moslem, Haouzi Hind et al. (2025-08)
    3D Printing in Construction:
    Sustainable Technology for Building Industry
  67. Shilar Fatheali, Ganachari Sharanabasava, Osman N., Ramesh S. et al. (2025-08)
    Advancements in Fiber-Reinforced Geopolymer Along with 3D Printed and Nano Concrete in Sustainable Construction
  68. Xiahou Xiaer, Ding Xingyuan, Yu Ke-Ke, Lu Cong (2025-08)
    From Waste to Strength:
    Sustainable Valorization of Modified Recycled PET Fibers for Rheological Control and Performance Enhancement in 3D Printed Concrete
  69. Khan Hilal, Zahid Zamil, Hussain Fazal, Ahmad Junaid et al. (2025-08)
    Sustainable Multifunctional Biochar-Based Cementitious Composites for Carbon Sequestration, Energy Storage, and Smart Infrastructure Applications:
    A Review
  70. Santhosh S., Raphael Benny, Santhanam Manu (2025-07)
    Exploration of Sustainable Beam Design Using Voronoi Patterns in Concrete 3D Printing
  71. Pemas Sotirios, Baliakas Dimitrios, Pechlivani Eleftheria, Stefanidou Maria (2025-07)
    Mechanical Properties of Bio-Printed Mortars with Bio-Additives for Green and Sustainable Construction
  72. Joshi Arpan, Gaspar Florindo, Archbold Paul, Silvestre José (2025-07)
    Study on the Composition of Mortars Based on Forest Biomass Fly Ash for Sustainable 3D Printing
  73. Chhabra Gulshan, Gupta Anjali, Bali Rajan, Tanwar Lovesh (2025-07)
    Advancing Sustainability in Construction:
    A Comprehensive Study on 3D-Printed Concrete Technologies
  74. Kaur Zinnia, Goyal Shweta, Kwatra Naveen, Bera Tarun (2025-07)
    Pore Structure Analysis and Durability Performance of Sustainable 3D Printed Concrete Incorporating Fly Ash and Limestone Calcined Clay Based Binders
  75. Raza Muhammad, Kravchenko Ekaterina, Besklubova Svetlana, Lazorenko Georgy et al. (2025-07)
    3D Printing of Recycled Materials for Sustainable Construction:
    A Comprehensive Economic and Life Cycle Assessment
  76. Mahmoodi Obaid, Siad Hocine, Lachemi Mohamed, Şahmaran Mustafa (2025-07)
    Recent Advances in CDW-Based Geopolymers:
    A Review of Mechanical Performance, Structural Application, 3D Printing, Durability and Sustainability
  77. Bajwa Asad, Flemmer Claire, Samarasinghe Don, Bao Ding et al. (2025-07)
    Sustainability of 3D Printing Technology:
    A Review on Research Trends and Developments
  78. Alkhawaldeh Ayah, Alhassan Mohammad, Sawalha Ansam, Betoush Nour et al. (2025-06)
    Integration of 3D Printing and Machine Learning in Sustainable Construction:
    Feasibility and Challenges
  79. Huang Shuyi, Anton Ana-Maria, Dillenburger Benjamin, Xu Weiguo (2025-06)
    Lamella-Inspired 3D Concrete Printed Column-Slab System:
    Balancing Act for Productivity and Sustainability
  80. Sakhare Vishakha, Khairnar Neha, Dahatonde Ulka, Mashalkar Shilpa (2025-06)
    Review on Sustainability in 3D Concrete Printing:
    Focus on Waste Utilization and Life Cycle Assessment
  81. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John (2025-06)
    Enhancing 3D Printed Concrete Through Waste Fly Ash:
    A Comprehensive Approach to Sustainable and Efficient Mix Design
  82. Wijethunge Anjalee, Samarasinghe Don, Le An, Gajanayake Akvan et al. (2025-06)
    A Systematic Review on Sustainable 3D Concrete Printing:
    Opportunities and Challenges
  83. Oseji Samuel, Chukwuemeka Prince, Imoni Okes (2025-06)
    Artificial Intelligence in 3D Printed Concrete:
    Sustainability Assessment and Implementation Challenges
  84. Karamara Merve, Bogdanski Moritz-Ole, Zöller Raphael, Albrecht Sophie et al. (2025-06)
    Increasing Efficiency and Sustainability:
    A Comparative Analysis of Concrete 3D Printing and Traditional Methods Based on Case Studies
  85. Senf Ferdinand, Javed Rezan, Funke Henrik, Gelbrich Sandra (2025-06)
    Enhanced Environmental Sustainability of 3D-Printed Concrete Mixtures Based on Calcium Sulfoaluminate (CSA) and Blast Furnace Cement (CEM III/B)
  86. Mohamed Osama, Mishra Anamika, Isam Fida (2025-05)
    An Overview of 3D Printed Concrete for Building Structures:
    Material Properties, Sustainability, Future Opportunities, and Challenges
  87. Nayaka Ramesh, Kumar H., Sharif Ahamed, Zhang Y. (2025-05)
    Exploring Key Aspects and Sustainable Benefits of 3D Concrete Printing (3DCP):
    A Selective Review
  88. Irshidat Mohammad, Albeitjali Naeem, Amjad Umar, Alnuaimi Hamad et al. (2025-05)
    From Waste to Strength:
    Recycled Steel Fibers for Sustainable 3D Printing of Cementitious Composites
  89. Maralapalle Vedprakash, Kumavat Hemraj, Nadaf Maheboobsab, Zende Aijaz et al. (2025-04)
    Optimizing 3D Geopolymer Concrete for Sustainable Construction:
    A Review of Material Selection, Printing Methods, and Properties
  90. Oladunni Oluwole, Lee Carman, Ibrahim Idowu, Olanrewaju Oludolapo (2025-03)
    Advances in Sustainable Additive Manufacturing:
    A Systematic Review for Construction Industry to Mitigate Greenhouse Gas Emissions
  91. Jin Willy, Ouellet-Plamondon Claudiane, Caron Jean-François (2025-03)
    Multi-Objective Optimization of a Sustainable LC3 Mortar for 3D Printing
  92. Tran Mien, Le Thanh, Cao Nguyen, Nguyen Thi (2025-03)
    Sustainable Prospect for Entire Replacement of River Sand with Recycled Glass Aggregate in 3D Printing Concrete:
    Rheological Properties, Printability, and Alkali-Silica Reaction
  93. Mim Nusrat, Shaikh Faiz, Sarker Prabir (2025-03)
    Sustainable 3D Printed Concrete Incorporating Alternative Fine Aggregates:
    A Review
  94. Mansouri Abraham, Wolde Japi, Joda Akram (2025-03)
    The Potential of Sand as a Sustainable Infill for 3D Concrete Printed Building Walls
  95. Koszela Kamila, Chajec Adrian (2025-03)
    Sustainable Additive Manufacturing:
    How the Composition of the Cementitious Mix Influences Its Fresh Properties
  96. Kloft Harald, Hack Norman, Sawicki Bartłomiej, Dörrie Robin et al. (2025-03)
    Digital Fabrication Strategies for Sustainability
  97. Teng Fei, Xu Fengming, Yang Minxin, Yu Jie et al. (2025-02)
    Development of Sustainable Strain-Hardening Cementitious Composites Containing Diatomite for 3D Printing
  98. Sangiorgio Valentino, Rossetti Pietro, Polidoro Anthony, Rossi Emilio (2025-02)
    Sustainable Raw-Earth Blocks Achieved with 3D-Printed Formworks:
    Parametric Modeling, Prototyping, and Laboratory Testing
  99. Srinivas Dodda, Panda Biranchi, Suraneni Prannoy, Sitharam Thallak (2025-01)
    Influence of Mixture-Composition and Carbonation-Curing on Properties of Sustainable 3D Printable Mortars
  100. Ambily Parukutty, Kaliyavaradhan Senthil, Sebastian Shilpa, Shekar Deepadharshan (2025-01)
    Sustainable 3D Printable Concrete-Mix Using Copper-Slag
  101. Hassan Amer, Alomayri Thamer, Noaman Mohammed, Zhang Chunwei (2025-01)
    3D Printed Concrete for Sustainable Construction:
    A Review of Mechanical Properties and Environmental Impact
  102. Fahfouhi Karim, Varum Humberto, Almeida Henrique, Craveiro Flávio et al. (2024-12)
    Reshaping Africa’s Sustainable Future Through 3D Printing
  103. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa et al. (2024-12)
    From Local Earth to Modern Structures:
    A Critical Review of 3D Printed Cement Composites for Sustainable and Efficient Construction
  104. Raqeb Hanan, Ghaffar Seyed (2024-12)
    3D Concrete Printing in Kuwait:
    Stakeholder Insights for Sustainable Waste Management Solutions
  105. Aziz Saqib, Alexander Bradley, Gengnagel Christoph, Loutfi Jamila (2024-12)
    Minimal Mineral ‑ Rethinking Ceiling Systems:
    Shaping the Future of Sustainable Construction
  106. Irshidat Mohammad, Cabibihan John-John, Fadli Fodil, Ramahi Siraj et al. (2024-12)
    Waste Materials Utilization in 3D Printable Concrete for Sustainable Construction Applications:
    A Review
  107. Wu Mushuang, Wang Zixiao, Chen Yuxuan, Zhu Mengyu et al. (2024-11)
    Effect of Steel-Slag on Rheological and Mechanical Properties of Sulfoaluminate-Cement-Based Sustainable 3D Printing Concrete
  108. Habibi Alireza, Buswell Richard, Osmani Mohamed, Aziminezhad Mohamadmahdi (2024-11)
    Sustainability Principles in 3D Concrete Printing:
    Analysing Trends, Classifying Strategies, and Future Directions
  109. Bartaky Markus, Gosch Lukas, Stavric Milena (2024-11)
    Sustainable Temporary Housing:
    An Evaluation-Framework for Large-Scale 3D Printer for Adobe Construction in Challenging Environments
  110. Loporcaro Giuseppe, Scott Allan, Clucas Don, Palermo Alessandro et al. (2024-11)
    Sustainable Resilience for 3D Concrete Printed Homes in New Zealand:
    A Three Years Research Government Funding Overview
  111. Kaszyńska Maria, Skibicki Szymon (2024-11)
    Sustainable Development Approach for 3D Concrete Printing
  112. Jesus Manuel, Ribeiro Elis, Teixeira João, Rangel Bárbara et al. (2024-11)
    3D Printed Mortars with Marble-Powder Towards Sustainable Construction
  113. Thomsen Mette, Tamke Martin, Rossi Gabriella, Chiujdea Ruxandra-Stefania et al. (2024-11)
    Sustainable Construction:
    Additive Manufacturing in a Circular Design Framework
  114. Murali Gunasekaran, Leong Sing (2024-11)
    Waste-Driven Construction:
    A State of the Art Review on the Integration of Waste in 3D Printed Concrete in Recent Researches for Sustainable Development
  115. Vlieger Jentel, Cizer Özlem, Lesage Karel, Desplentere Frederik et al. (2024-11)
    Rheological- and Pumpability-Analysis of Sustainable 3D Printing Mortars Incorporating Recycled Sand
  116. Csótár Hanna, Baranyai Gusztáv, Szalai Szabolcs, Fischer Szabolcs (2024-11)
    Sustainable Uses of 3D Printing Applied to Concrete Structures
  117. Motalebi Arash, Khondoker Mohammad, Kabir Golam (2024-10)
    Sustainable Structures Unveiled:
    Navigating the Environmental Landscape of 3D Printing in Construction
  118. Adamtsevich Liubov, Pustovgar Andrey, Adamtsevich Aleksey (2024-10)
    Assessing the Prospects and Risks of Delivering Sustainable Urban Development Through 3D Concrete Printing Implementation
  119. Senf Ferdinand, Javed Rezan, Funke Henrik, Gelbrich Sandra (2024-10)
    Concrete-Extrusion Using Sustainable Cement Alternatives
  120. Abstoß Marvin, Funke Henrik, Gelbrich Sandra (2024-10)
    Sustainable Production of Complex Precast Concrete Elements Without Demolding Drafts Using Concrete Extrusion and Processing
  121. Josa Irene, Fuente Albert (2024-10)
    Traditional and Modern Methods of Construction:
    Comparative Study of the Sustainability of Single‐Family Homes
  122. Over Derya, Ozbakan Nesil, Bustani Mehmet, Karali Bulut (2024-10)
    An Investigation of Rheological Properties and Sustainability of Various 3D Printing Concrete Mixtures with Alternative Binders and Rheological Modifiers
  123. Samrani Phebe, Cao Yifang, Fimbres-Weihs Gustavo, Sanjaya Eric et al. (2024-09)
    Effect of Fly-Ash and Ground Waste Glass as Cement Replacement in Concrete 3D Printing for Sustainable Construction
  124. Liu Xiaoshuang, Li Shiming, Duan Yanjun, Du Zhiqin et al. (2024-09)
    Influence of Printing Interval on the Imbibition Behavior of 3D Printed Foam-Concrete for Sustainable and Green Building Applications
  125. Jongvisuttisun Passarin, Chaiyapoom Phattarakamon, Jiramarootapong Patiphat, Meemuk Kornravee et al. (2024-09)
    The Second 3D Printed Prefabricated Prefinished Volumetric Construction Building in Thailand:
    A New Sustainable and Efficient Approach for a Low-Rise Prefab Modular Building
  126. Colyn Markus, Babafemi Adewumi, Zijl Gideon (2024-09)
    Advancements in Sustainability of 3D Concrete Printing:
    Presenting Low-Carbon Mixtures for Additively Manufactured Concrete Structures in Practice
  127. Migliorino Jenna, Ahmed Aly, Mackin Anthony, Hanoun Zaid et al. (2024-09)
    Topology-Optimization-Based Additive Construction for Sustainability
  128. Hierden Naomi, Yu Q., Brouwers Henricus (2024-09)
    Mechano-Chemically Activated Local Clays as Sustainable Binder Replacement for 3D Concrete Mixtures
  129. Rangel Carolina, Salet Theo, Lucas Sandra (2024-09)
    A Framework for Crafting Sustainable Lightweight Concrete in Additive Manufacturing
  130. Thiel Charlotte, Hechtl Christian, Gehlen Christoph, Kränkel Thomas (2024-09)
    Sustainability Potential of Additive Manufactured Concrete Structures:
    Studies on the Life Cycle Assessment and Circularity of an Extruded Exterior Wall
  131. Reißig Silvia, Herdan Annika, Mechtcherine Viktor (2024-09)
    Characterisation of the Rheological Behavior of a Resource-Saving Sustainable Concrete in the Context of 3D Printing
  132. Jin Willy, Ouellet-Plamondon Claudiane, Caron Jean-François (2024-09)
    Multi-Objective-Optimization of a Sustainable Ternary Mortar for 3D Printing
  133. Khan Mehran, McNally Ciaran (2024-09)
    A Review of Developments in Low-Carbon 3D Printed Concrete in Europe:
    Steps Towards Sustainable Construction
  134. Rodrigues e Silva Rafaela, Souza Eduarda, Ribeiro Borges Paulo (2024-09)
    One-Part and Two-Part Alkali-Activation of Iron Mining-Tailings for Sustainable 3D Concrete Printing Mixes
  135. Carpo Mario (2024-09)
    The Sustainable Lightness of Digital Fabrication
  136. Anton Ana-Maria, Dillenburger Benjamin (2024-09)
    Towards a Sustainable 3D‐Concrete‐Printed Architecture:
    Assemblies, Detailing and Ornamentation
  137. Jenny David, Gramazio Fabio, Kohler Matthias (2024-09)
    Reimagining Earthen Materials:
    The New Era of Sustainable and Digital Construction
  138. Feringa Jelle (2024-09)
    Scalable Equals Sustainable:
    The New Era of Sustainable and Digital Construction
  139. Lloret-Fritschi Ena, Jenny Ercan, Jenny David (2024-09)
    A New Future of Construction:
    Digital Fabrication and Sustainability
  140. Jenny Ercan, Gawel Abel (2024-09)
    Sustainable Construction Through On‐Site Robotic Fabrication:
    Past and Future Concepts
  141. Wangler Timothy, Patankar Yamini, Flatt Robert (2024-09)
    Sustainable Digital Concrete:
    Myth, Reality or Emerging Opportunity?
  142. Ting Guan, Tay Yi, Quah Tan, Tan Ming et al. (2024-09)
    Sustainable Support-Material for Overhang Printing in 3D Concrete Printing Technology
  143. Sood Sandeep, Lamba Yogveer, Singh Ashutosh (2024-09)
    Progress and Prospects of 3D and 4D Printing in Sustainable Development:
    A Scientometric Review
  144. Zhao Zhihui, Liu Minghao, Kang Aihong, Cai Xianhuan et al. (2024-08)
    Rheology and Buildability of Sustainable 3D Printed Magnesium-Potassium-Phosphate-Cement Composites Incorporating MgO-SiO2-K2HPO4
  145. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2024-08)
    Time-Dependent Behavior of 3D Printed Fiber-Reinforced Limestone-Calcined-Clay-Cement Concrete Under Sustained Loadings
  146. Abbasnejad Behzad, Soltani Sahar, Karamoozian Amirhossein, Gu Ning (2024-08)
    A Systematic Literature Review on the Integration of Industry 4.0 Technologies in Sustainability Improvement of Transportation Construction Projects:
    State of the Art and Future Directions
  147. Reddy B., Sameer Sk, Ramesh V., Sriya B. et al. (2024-08)
    Sustainable Development of 3D Printable Quaternary Geopolymer Concrete
  148. Aabbas Mohamed, Mahdaoui Mustapha, Ahachad Mohammed, Mazian Brahim et al. (2024-07)
    Advancing Sustainable Construction:
    Terracotta Component Development Through Extrusion-Based 3D Printing with Local Clay
  149. Zhong Kuangnan, Huang Kaiyun, Liu Zhichao, Wang Fazhou et al. (2024-07)
    CO2-Driven Additive Manufacturing of Sustainable Steel-Slag-Mortars
  150. Kamra Juhi, Mani Ambica, Tripathi V. (2024-06)
    3D Printing:
    A Boon or a Bane for Sustainable Construction
  151. Bong Shin, Du Hongjian (2024-06)
    Sustainable Additive Manufacturing of Concrete with Low-Carbon Materials
  152. Aslani Farhad, Zhang Yifan (2024-06)
    Sustainable 3D Printed Concrete Structures Using High-Quality Secondary Raw Materials
  153. Seifan Mostafa (2024-06)
    Sustainable Three-Dimensional Printing Concrete:
    Advances, Challenges, and Future Direction
  154. Krishna R., Rehman Asif, Mishra Jyotirmoy, Saha Suman et al. (2024-06)
    Additive Manufacturing of Geopolymer Composites for Sustainable Construction:
    Critical Factors, Advancements, Challenges, and Future Directions
  155. Zhuang Zicheng, Xu Fengming, Ye Junhong, Hu Nan et al. (2024-06)
    A Comprehensive Review of Sustainable Materials and Tool-Path-Optimization in 3D Concrete Printing
  156. Yousaf Arslan, Rashid Ans, Koç Muammer (2024-05)
    Parameter-Tuning for Sustainable 3D Printing of Clay Structures
  157. Mathew Ashitta, Philip Nivin, Jędrzejewska Agnieszka (2024-05)
    Enhancing Sustainability and Performance of 3D Printing Mortar with Alccofine 1203, GGBS, and Kaolin:
    Experimental Investigation and Mechanical Characterization
  158. Los Angeles Ortega Rosario Maria, Medina Melany, Duque Rafael, Alberto Jaén Ortega Antonio et al. (2024-05)
    Advancing Sustainable Construction:
    Insights into Clay-Based Additive Manufacturing for Architecture, Engineering, and Construction
  159. Capêto Ana, Jesus Manuel, Uribe Braian, Guimarães Ana et al. (2024-05)
    Building a Greener Future:
    Advancing Concrete Production Sustainability and the Thermal Properties of 3D Printed Mortars
  160. Alcayaga Restelli Adolfo, Avudaiappan Siva, Arrué Muñoz Ramón, Canales Cristian et al. (2024-04)
    Tailings as a Sustainable Resource in 3D Printed Concrete for the Mining Industry:
    A Literature Review
  161. Wang Xiaonan, Li Wengui, Guo Yipu, Kashani Alireza et al. (2024-04)
    Concrete 3D Printing Technology for Sustainable Construction:
    A Review on Raw Material, Concrete Type and Performance
  162. Roux Charlotte, Archez Julien, Gall Corentin, Saadé Myriam et al. (2024-04)
    Towards Sustainable Material:
    Optimizing Geopolymer Mortar Formulations for 3D Printing
  163. Hassan Habibelrahman, Rodriguez-Ubinas Edwin, Tamimi Adil, Trepci Esra et al. (2024-04)
    Towards Innovative and Sustainable Buildings:
    A Comprehensive Review of 3D Printing in Construction
  164. Moghayedi Alireza, Mahachi Jeffrey, Lediga Refilwe, Mosiea Tshepang et al. (2024-03)
    Revolutionizing Affordable Housing in Africa:
    A Comprehensive Technical and Sustainability Study of 3D Printing Technology
  165. Labuda Igor, Pugliese Federica, Dzwierzynska Jolanata (2024-03)
    An Innovative Concept for 3D Sand-Printed Sustainable Refugee Shelters in a Sandy Desert in a Hot and Dry Climate
  166. Souza Eduarda, Ribeiro Borges Paulo, Stengel Thorsten, Nematollahi Behzad et al. (2024-03)
    3D Printed Sustainable Low-Cost Materials for Construction of Affordable Social Housing in Brazil:
    Potential, Challenges, and Research Needs
  167. Zhou Yiyi, Luo Haoran, Anand Kamal, Singh Amardeep et al. (2024-02)
    Sustainable Use of Ultrafine Recycled Glass in Additive Manufactured Reactive-Powder Concrete
  168. Wang Xiaonan, Li Wengui, Guo Yipu, Kashani Alireza et al. (2024-02)
    Concrete 3D Printing Technology in Sustainable Construction:
    A Review on Raw Materials, Concrete Types and Performances
  169. Colyn Markus, Zijl Gideon, Babafemi Adewumi (2024-02)
    Fresh and Strength Properties of 3D Printable Concrete Mixtures Utilising a High Volume of Sustainable Alternative Binders
  170. Silva Maicon, Silva Lívia, Toralles Berenice, Cardoso Flávia et al. (2024-02)
    Building a Sustainable Future:
    The Role of Additive Manufacturing in Civil Construction
  171. Gamage Kumari, Fawzia Sabrina, Zahra Tatheer, Teixeira Muge et al. (2024-02)
    Advancement in Sustainable 3D Concrete Printing:
    A Review on Materials, Challenges, and Current Progress in Australia
  172. Isaac Geoff, Nicholas Paul, Paul Gavin, Pietroni Nico et al. (2024-02)
    Automated Shotcrete:
    A More Sustainable Construction Technology
  173. Mahanthi S., Kantarao M., Uma Maheswara Rao S., Niharika M. et al. (2024-02)
    Sustainable Mix-Design for 3D Printable Concrete
  174. Özalp Fatih (2024-01)
    Mechanical Behavior and Permeability Properties of Sustainable and High-Performance Anisotropic Three-Dimensional Printable Concrete
  175. Rogers Helen, Srivastava Mohit, Tsakou Myriam-Elissavet, Prashad Anisha (2024-01)
    Sustainable Supply Chain Models for 3D Printed Houses
  176. Khan Mehran, McNally Ciaran (2023-11)
    A Holistic Review on the Contribution of Civil Engineers for Driving Sustainable Concrete Construction in the Built Environment
  177. Coniglo Alfonso, Palmiotta Annarota, Amato Michele, Gigliotti Rosario (2023-11)
    Earth-3D Printing for Non-Structural Elements of Modular Steel Buildings:
    Proposal for an Innovative and Sustainable Construction System
  178. Eversmann Philipp, Rossi Andrea (2023-11)
    Towards Construction 4.0:
    Computational Circular Design and Additive Manufacturing for Architecture Through Robotic Fabrication with Sustainable Materials and Open-Source Tools
  179. Zhu Binrong, Wang Yufei, Sun Junbo, Wei Yang et al. (2023-10)
    An Experimental Study on the Influence of Waste-Rubber-Particles on the Compressive, Flexural and Impact Properties of 3D Printable Sustainable Cementitious Composites
  180. Singh Amardeep, Wang Yufei, Zhou Yiyi, Sun Junbo et al. (2023-10)
    Utilization of Antimony-Tailings in Fiber-Reinforced 3D Printed Concrete:
    A Sustainable Approach for Construction Materials
  181. Genc Gokhan, Demircan Ruya, Beyhan Figen, Kaplan Gökhan (2023-10)
    Assessment of the Sustainability and Producibility of Adobe-Constructions Reinforced with Ca-Based Binders:
    Environmental Life-Cycle-Analysis and 3D Printability
  182. Kurniati Eka, Kim Heejeong (2023-10)
    Utilizing Industrial Byproducts for Sustainable Three-Dimensional-Printed Infrastructure Applications:
    A Comprehensive Review
  183. Sedghi Reza, Zafar Muhammad, Hojati Maryam (2023-10)
    Exploring Fresh and Hardened Properties of Sustainable 3D Printed Lightweight Cementitious Mixtures
  184. Beersaerts Glenn, Soete Jeroen, Giels Michiel, Eykens Lies et al. (2023-09)
    3D Printing of an Iron-Rich Slag-Based Hybrid Mortar:
    A Durable, Sustainable and Cost-Competitive Product?
  185. Asensio Javier, Josa Irene, Monserrat Andrea, Fuente Albert (2023-09)
    3D‐Printed Concrete Footbridges:
    An Approach to Assess the Sustainability Performance
  186. Mohsen Mohamed, Diseet Malak, Aburumman Mervat, Taha Ramzi et al. (2023-09)
    3D Printed Clay Enhanced with Graphene-Nano-Platelets for Sustainable and Green Construction
  187. Ye Junhong, Teng Fei, Yu Jie, Yu Shiwei et al. (2023-08)
    Development of 3D Printable Engineered Cementitious Composites with Incineration-Bottom-Ash for Sustainable and Digital Construction
  188. Mani Aravindhraj, Muthukumar S., Sathyanarayanan K. (2023-08)
    Use of Alccofine 1203 as a Sustainable Supplementary Cementitious Material for Printable Concrete
  189. Tabassum Toiba, Ahmad Mir Ajaz (2023-08)
    A Review of 3D Printing Technology:
    The Future of Sustainable Construction
  190. Yemesegen Eden, Memari Ali (2023-07)
    A Review of Experimental Studies on Cob, Hempcrete, and Bamboo Components and the Call for Transition Towards Sustainable Home Building with 3D Printing
  191. Núñez Varillas Christoper, Regalado Espinoza Marck, Gago Gamboa Angela (2023-07)
    3D Printing:
    An Opportunity for the Sustainable Development of Building Construction
  192. Rahemipoor Sahand, Hasany Masoud, Mehrali Mohammad, Almdal Kristoffer et al. (2023-07)
    Phase-Change-Materials Incorporation into 3D Printed Geopolymer Cement:
    A Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings
  193. Mousavi Seyed, Dehestani Mehdi (2023-07)
    On the Possibility of Using Waste-Disposable-Gloves as Recycled Fibers in Sustainable 3D Concrete Printing Using Different Additives
  194. Jesus Manuel, Pessoa Ana Sofia, Guimarães Ana, Rangel Bárbara et al. (2023-06)
    A Reflection on Sustainable Opportunities for 3D Printing in Construction
  195. Singh Narinder, Colangelo Francesco, Farina Ilenia (2023-06)
    Sustainable Non-Conventional Concrete 3D Printing:
    A Review
  196. Joshi Arpan, Poullain Philippe, Craveiro Flávio, Bártolo Helena (2023-06)
    Earth as a Construction-Material for Sustainable 3D Printing:
    Rheological Aspect
  197. Heywood Kate, Nicholas Paul (2023-06)
    Sustainability and 3D Concrete Printing:
    Identifying a Need for a More Holistic Approach to Assessing Environmental Impacts
  198. Rahmat N., Ali Noorwirdawati, Abdullah Siti, Abdul Hamid Noor et al. (2023-06)
    Fresh Properties and Flexural Strength of 3D Printing Sustainable Concrete Containing GGBS as Partial Cement Replacement
  199. Simioni Fernanda, Rangel Bárbara, Campos Nadine, Teixeira João (2023-04)
    3D Printing for Construction:
    A Systematic Review of Its Sustainability
  200. Cruz Gil, Dizon John, Farzadnia Nima, Zhou Hongyu et al. (2023-04)
    Performance, Applications, and Sustainability of 3D Printed Cement and Other Geomaterials
  201. Volpe Stelladriana, Sangiorgio Valentino, Petrella Andrea, Notarnicola Michele et al. (2023-04)
    3D Printed Concrete Blocks Made with Sustainable Recycled Material
  202. Valente Marco, Sambucci Matteo, Chougan Mehdi, Ghaffar Seyed (2023-04)
    Composite Alkali-Activated Materials with Waste-Tire-Rubber Designed for Additive Manufacturing:
    An Eco-Sustainable and Energy Saving Approach
  203. Fonseca Mariana, Matos Ana (2023-03)
    3D Construction Printing Standing for Sustainability and Circularity:
    Material-Level Opportunities
  204. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-03)
    Influence of Limestone-Calcined-Clay-Cement on Properties of 3D Printed Concrete for Sustainable Construction
  205. Cuevas Villalobos Karla, Strzałkowski Jarosław, Kim Ji-Su, Ehm Clemens et al. (2023-02)
    Towards Development of Sustainable Lightweight 3D Printed Wall Building Envelopes:
    Experimental and Numerical Studies
  206. Pons-Valladares Oriol, Casanovas-Rubio Maria, Armengou Jaume, Fuente Albert (2023-02)
    Approach for Sustainability-Assessment for Footbridge Construction Technologies:
    Application to the First World D-Shape 3D Printed Fiber-Reinforced Mortar Footbridge in Madrid
  207. Ahmed Ghafur (2023-01)
    A Review of 3D Concrete Printing:
    Materials and Process Characterization, Economic Considerations and Environmental Sustainability
  208. Uddin Md (2022-12)
    Influence of 3D Printable Sustainable Concrete and Industrial Waste on Industry 5.0
  209. Chun Seung-Yeop, Kim Su-jin, Kim Woon-Gi, Lee Geumyeon et al. (2022-12)
    Powder-Bed-Based 3D Printing with Cement for Sustainable Casting
  210. Ibrahim Iman, Eltarabishi Fatma, Abdalla Hadeer, Abdallah Mohamed (2022-10)
    3D Printing in Sustainable Buildings:
    Systematic Review and Applications in the United Arab Emirates
  211. Sun Bochao, Zeng Qiang, Wang Dianchao, Zhao Weijian (2022-10)
    Sustainable 3D Printed Mortar with CO2 Pretreated Recycled Fine Aggregates
  212. Mata-Falcón Jaime, Bischof Patrick, Huber Tobias, Anton Ana-Maria et al. (2022-09)
    Digitally Fabricated Ribbed Concrete Floor Slabs:
    A Sustainable Solution for Construction
  213. Bischof Patrick, Mata-Falcón Jaime, Kaufmann Walter (2022-08)
    Fostering Innovative and Sustainable Mass-Market Construction Using Digital Fabrication with Concrete
  214. Mousavi Seyed, Dehestani Mehdi (2022-08)
    Influence of Latex and Vinyl Disposable Gloves as Recycled Fibers in 3D Printing Sustainable Mortars
  215. Khosravani Mohammad, Haghighi Azadeh (2022-08)
    Large-Scale Automated Additive Construction:
    Overview, Robotic Solutions, Sustainability, and Future Prospect
  216. Raza Muhammad, Zhong Ray (2022-08)
    A Sustainable Roadmap for Additive Manufacturing Using Geopolymers in Construction Industry
  217. Silva Wilson, Kaasgaard Martin, Andersen Thomas (2022-06)
    Sustainable 3D Concrete Printing with Large Aggregates
  218. Reißig Silvia, Nerella Venkatesh, Mechtcherine Viktor (2022-06)
    Material-Design and Rheological Behavior of Sustainable Cement-Based Materials in the Context of 3D Printing
  219. Oke Ayodeji, Atofarati John, Bello Sherifat (2022-06)
    Awareness of 3D Printing for Sustainable Construction in an Emerging Economy
  220. Flatt Robert, Wangler Timothy (2022-05)
    On Sustainability and Digital Fabrication with Concrete
  221. Gran Erik, Madrid Javier, Ortega Guillermo, Tenorio Ríos José et al. (2022-05)
    Conceptual Study and Literature Review of Integration of Lean Manufacturing and 3D Printing in Construction to Support Sustainability
  222. Tinoco Matheus, Mendonça Érica, Fernandez Letízia, Caldas Lucas et al. (2022-04)
    Life Cycle Assessment and Environmental Sustainability of Cementitious Materials for 3D Concrete Printing:
    A Systematic Literature Review
  223. Rollakanti Chiranjeevi, Prasad C. (2022-04)
    Applications, Performance, Challenges and Current Progress of 3D Concrete Printing Technologies as the Future of Sustainable Construction:
    A State of the Art Review
  224. Liu Junli, Nguyen Vuong, Panda Biranchi, Fox Kate et al. (2022-02)
    Additive Manufacturing of Sustainable Construction Materials and Form-Finding Structures:
    A Review on Recent Progresses
  225. Dey Dhrutiman, Srinivas Dodda, Panda Biranchi, Suraneni Prannoy et al. (2022-02)
    Use of Industrial Waste-Materials for 3D Printing of Sustainable Concrete:
    A Review
  226. Hojati Maryam, Li Zhanzhao, Memari Ali, Park Keunhyoung et al. (2022-01)
    3D Printable Quaternary-Cementitious-Materials Towards Sustainable Development:
    Mixture Design and Mechanical Properties
  227. Batikha Mustafa, Jotangia Rahul, Baaj Mohamad, Mousleh Ibrahim (2021-12)
    3D Concrete Printing for Sustainable and Economical Construction:
    A Comparative Study
  228. Chen Yu, He Shan, Gan Yidong, Çopuroğlu Oğuzhan et al. (2021-11)
    A Review of Printing-Strategies, Sustainable Cementitious Materials and Characterization Methods in the Context of Extrusion-Based 3D Concrete Printing
  229. Rollakanti Chiranjeevi, Prasad C., Joe Adams (2021-10)
    Digital Concrete for Sustainable Construction Industry:
    A State of the Art Review
  230. Albalawi Hamed, Khan Zainab, Valle-Pérez Alexander, Kahin Kowther et al. (2021-09)
    Sustainable and Eco-Friendly Coral Restoration Through 3D Printing and Fabrication
  231. Bhattacherjee Shantanu, Basavaraj Anusha, Rahul Attupurathu, Santhanam Manu et al. (2021-06)
    Sustainable Materials for 3D Concrete Printing
  232. Haghighi Azadeh, Mohammed Abdullah, Wang Lihui (2021-06)
    Energy Efficient Multi-Robotic 3D Printing for Large-Scale Construction:
    Could This Technique Contribute to Sustainability of Future Buildings?
  233. Markin Slava, Krause Martin, Otto Jens, Schröfl Christof et al. (2021-06)
    3D Printing with Foam-Concrete:
    From Material Design and Testing to Application and Sustainability
  234. Adaloudis Max, Bonnin Roca Jaime (2021-05)
    Sustainability Tradeoffs in the Adoption of 3D Concrete Printing in the Construction Industry
  235. Teixeira João, Schaefer Cecília, Rangel Bárbara, Alves Jorge et al. (2021-03)
    Development of 3D Printing Sustainable Mortars Based on a Bibliometric Analysis
  236. Mohammad Malek, Masad Eyad, Ghamdi Sami (2020-12)
    3D Concrete Printing Sustainability:
    A Comparative Life Cycle Assessment of Four Construction Method Scenarios
  237. Luhar Salmabanu, Suntharalingam Thadshajini, Navaratnam Satheeskumar, Luhar Ismail et al. (2020-12)
    Sustainable and Renewable Bio-Based Natural Fibers and Its Application for 3D Printed Concrete:
    A Review
  238. Kaszyńska Maria, Skibicki Szymon, Hoffmann Marcin (2020-12)
    3D Concrete Printing for Sustainable Construction
  239. Tay Yi, Panda Biranchi, Ting Guan, Ahamed N. et al. (2020-10)
    3D Printing for Sustainable Construction
  240. Leschok Matthias, Dillenburger Benjamin (2020-09)
    Sustainable Thin-Shell 3D Printed Formwork for Concrete
  241. Mahadevan Meera, Francis Ann, Thomas Albert (2020-08)
    A Simulation-Based Investigation of Sustainability Aspects of 3D Printed Structures
  242. Maitenaz Sébastien, Mesnil Romain, Onfroy Paul, Metge Nicolas et al. (2020-07)
    Sustainable Reinforced Concrete Beams:
    Mechanical Optimization and 3D Printed Formwork
  243. Khalil Abdullah, Wang Xiangyu, Celik Kemal (2020-02)
    3D Printable Magnesium Oxide Concrete:
    Towards Sustainable Modern Architecture
  244. Lu Bing, Zhu Weiping, Weng Yiwei, Liu Zhixin et al. (2020-02)
    Study of MgO-Activated-Slag as a Cementless Material for Sustainable Spray-Based 3D Printing
  245. Long Wujian, Tao Jie-Lin, Lin Can, Gu Yucun et al. (2019-08)
    Rheology and Buildability of Sustainable Cement-Based Composites Containing Micro-Crystalline Cellulose for 3D Printing
  246. Weng Yiwei, Ruan Shaoqin, Li Mingyang, Mo Liwu et al. (2019-06)
    Feasibility Study on Sustainable-Magnesium-Potassium-Phosphate Cement-Paste for 3D Printing
  247. Chen Yu, Li Zhenming, Figueiredo Stefan, Çopuroğlu Oğuzhan et al. (2019-04)
    Limestone and Calcined-Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing:
    A Fundamental Study of Extrudability and Early-Age Strength Development
  248. Bong Shin, Nematollahi Behzad, Nazari Ali, Xia Ming et al. (2019-03)
    Method of Optimization for Ambient Temperature Cured Sustainable Geopolymers for 3D Printing Construction Applications
  249. Bentz Dale, Jones Scott, Bentz Isaiah, Peltz Max (2019-02)
    Towards the Formulation of Robust and Sustainable Cementitious Binders for 3D Additive Construction by Extrusion
  250. Mata-Falcón Jaime, Bischof Patrick, Kaufmann Walter (2018-09)
    Exploiting the Potential of Digital Fabrication for Sustainable and Economic Concrete Structures
  251. Bentz Dale, Jones Scott, Bentz Isaiah, Peltz Max (2018-06)
    Towards the Formulation of Robust and Sustainable Cementitious Binders for 3D Additive Construction by Extrusion
  252. Sakin Mehmet, Kiroglu Yusuf (2017-10)
    3D Printing of Buildings:
    Construction of the Sustainable Houses of the Future by BIM
  253. Panda Biranchi, Paul Suvash, Lim Jian, Tay Yi et al. (2017-08)
    Additive Manufacturing of Geopolymer for Sustainable Built Environment
  254. Panda Biranchi, Paul Suvash, Tan Ming (2017-07)
    Anisotropic Mechanical Performance of 3D Printed Fiber-Reinforced Sustainable Construction-Material
  255. Hager Izabela, Golonka Anna, Putanowicz Roman (2016-08)
    3D Printing of Buildings and Building Components as the Future of Sustainable Construction?
  256. Wolfs Robert, Salet Theo, Hendricks Berry (2015-08)
    3D Printing of Sustainable Concrete Structures