Skip to content

#review

Keywords by Co - Occurrence

  1. Alawadi Fatemah, Murphy Martina, Eadie Robert (2026-01)
    Challenges and Solutions for Scalability of Affordable Housing:
    A Literature Review on 3D Printed Construction in Kuwait
  2. Norouzi Yasaman, Dixit Manish (2026-01)
    A Review of Advantages and Challenges of Using Hempcrete for 3D Printing in Construction
  3. Kechagia Aikaterini, Tzounis Lazaros, Kechagias John (2026-01)
    3D Printing Concrete:
    A Short Review of Systems and Materials
  4. Agegn Adamu, Regassa Yohannes, Angassa Kenatu, Mekonnen Kebede (2026-01)
    Systematic Review on 3D Concrete Printing Technology:
    Breakthroughs and Challenges
  5. Tushar Fazlul, Hasan Mehedi, Hasan Kamrul, Mawa Jannatul et al. (2026-01)
    Factors Affecting Flowability and Rheological Behavior of 3D Printed Concrete:
    A Comprehensive Review
  6. Dubey Pratik, Maurya Madan (2026-01)
    A Comprehensive Review of 3D Printing in Construction:
    Technology, Materials, and Digital Workflow
  7. Aden Abdishukri, Nuñez Montoya Alejandra, Ponce Josef, Rangel Bárbara et al. (2026-01)
    FAB-BIO:
    A Review of Bio-Based Materials Applied on 3D-Printed Living Walls
  8. Reis Rui, Aroso Francisca, Brandão Filipe, Camões Aires et al. (2026-01)
    A Systematic Review on the Durability of 3D-Printed Cementitious Materials:
    Insights and Research Challenges
  9. Ding Yao, Liu Yifan, Yang Bo, Liu Jiepeng et al. (2026-01)
    Application of Artificial Intelligence Technology in 3D Concrete Printing Quality Inspection and Control:
    A State-of-the-Art Review
  10. Basith Mydeen Pitchai Mohamed Abdul (2025-12)
    Polymer-Enhanced Composites for 3D Concrete Printing:
    A Review of Materials, Processes, and Performance
  11. Iqbal Imtiaz, Kasim Tala, Besklubova Svetlana, Inqiad Waleed et al. (2025-12)
    Exploring Knowledge Domains and Future Research Directions in 3D Printed Concrete:
    A Bibliometric and Systematic Review
  12. Taborda-Llano Isabella, Hoyos-Montilla Ary, Asensio Eloy, Guerrero Ana et al. (2025-12)
    Influence of the Construction Process Parameters on the Mechanical Performance and Durability of 3D Printed Concrete:
    A Systematic Review
  13. Athira R., Sathyan Dhanya (2025-11)
    Review of 3D Printing Advancements in Geopolymer Concrete:
    Current Challenges and Future Directions
  14. Najm-Eddine Asmae, Abouelmajd Mohamed, Najm-Eddine Youssef, Erritali Ilham et al. (2025-11)
    Topological Optimization in 3D Concrete Printing Structures:
    A Review
  15. Hasan Md, Xu Jie, Uddin Md (2025-11)
    A Critical Review of 3D Printed Fiber-Based Geopolymer Concrete:
    Fresh Properties, Mechanical Performance, and Current Limitations
  16. Adeel Muhammad (2025-11)
    Three-Dimensional Concrete Printing for Sustainable Construction and Architecture:
    A Comprehensive Review
  17. Masri Abdullah, Vazquez Elaine, Haddad Assed, Najjar Mohammed (2025-10)
    Life Cycle Costing in 3D Printing:
    A Literature Review
  18. Jamjala Siva, Thulasirangan Lakshmidevi Manivannan, Reddy K., Kafle Bidur et al. (2025-10)
    A Critical Review on Synergistic Integration of Nanomaterials in 3D-Printed Concrete:
    Rheology to Microstructure and Eco-Functionality
  19. Delavar Mohammad, Aslani Farhad, Sercombe Tim (2025-10)
    Cracking Behaviour in 3D Concrete Printed Fiber-Reinforced Cementitious Composites:
    A Review
  20. Mahmood Ali, Nanos Nikos, Begg David, Dhakal Hom (2025-10)
    Recycled Waste Materials Utilised in 3D Concrete Printing for Construction Applications:
    A Scientometric Review
  21. Maroszek Marcin, Rudziewicz Magdalena, Hebda Marek (2025-09)
    Recycled Components in 3D Concrete Printing Mixes:
    A Review
  22. Li Shuai, Corelli Jaide, Tran Jonathan, Fan Linhua (2025-09)
    3D Printable Cellulose Concrete:
    A Review and Pathway to Future Research
  23. Lopes de Aquino Brasil Alexander, Carmo Pena (2025-09)
    A Systematic Review of Robotic Additive Manufacturing Applications in Architecture, Engineering, and Construction
  24. Mawas Karam, Maboudi Mehdi, Gerke Markus (2025-09)
    A Review on Geometry and Surface Inspection in 3D Concrete Printing
  25. Chan Li-Jing, Padil Khairul, Chin Chee-Long, Ibrahim Izni et al. (2025-09)
    Strategies to Enhance Interlayer Bonding in 3D Printed Concrete:
    A Review
  26. Liu Ruiying, Xiong Zhongming, Chen Xuan, Jia Qiong et al. (2025-09)
    Industrial Waste in 3D Printed Concrete:
    A Mechanistic Review on Rheological Control and Printability
  27. Ramirez Rodriguez Fatima, Ahmad Rafiq (2025-09)
    Sustainable Technology Advances for Additive Construction:
    A State-of-the-Art Review
  28. Mousavi Moein, Rangaraju Prasad (2025-09)
    Freeze-Thaw Durability of 3D Printed Concrete:
    A Comprehensive Review of Mechanisms, Materials, and Testing Strategies
  29. Lin Xing-Tao, Xu Shuhao, Chen Xiangsheng (2025-08)
    Optimization of Building Structures Based on Additive Manufacturing:
    A Review
  30. Khan Hilal, Zahid Zamil, Hussain Fazal, Ahmad Junaid et al. (2025-08)
    Sustainable Multifunctional Biochar-Based Cementitious Composites for Carbon Sequestration, Energy Storage, and Smart Infrastructure Applications:
    A Review
  31. Panchal Priyanka, Choi Myoungsung (2025-07)
    A Review on Effect of Natural Fibers to Mitigate CO2 Footprint and Enhance Engineering Properties of 3D Printing Concrete
  32. Goel Devansh, Kore Sudarshan (2025-07)
    Mapping the Bibliometric Progression of 3D Concrete Printing:
    A Concise Review
  33. Gerges Isabelle, Farraj Faten, Youssef Nicolas, Antczak Emmanuel et al. (2025-07)
    Methodologies to Design Optimum 3D Printable Mortar Mix:
    A Review
  34. Mahmoodi Obaid, Siad Hocine, Lachemi Mohamed, Şahmaran Mustafa (2025-07)
    Recent Advances in CDW-Based Geopolymers:
    A Review of Mechanical Performance, Structural Application, 3D Printing, Durability and Sustainability
  35. Bajwa Asad, Flemmer Claire, Samarasinghe Don, Bao Ding et al. (2025-07)
    Sustainability of 3D Printing Technology:
    A Review on Research Trends and Developments
  36. Ali Syed, Haq Mohd, Khan Rizwan, Hashmi Ahmad (2025-07)
    A Comprehensive Review on 3D Printing of Concrete:
    Materials, Methods and Mechanical Properties
  37. Sakhare Vishakha, Khairnar Neha, Dahatonde Ulka, Mashalkar Shilpa (2025-06)
    Review on Sustainability in 3D Concrete Printing:
    Focus on Waste Utilization and Life Cycle Assessment
  38. Wijethunge Anjalee, Samarasinghe Don, Le An, Gajanayake Akvan et al. (2025-06)
    A Systematic Review on Sustainable 3D Concrete Printing:
    Opportunities and Challenges
  39. Bajwa Asad, Samarasinghe Don, Flemmer Claire, Bao Ding (2025-06)
    A Systematic Literature Review on the Thermal Behaviour of Building Elements Constructed Through 3D Concrete Printing (3DCP)
  40. Ma Jiayue, Samarasinghe Don, Rotimi James, Zou Kelvin (2025-06)
    A Review of Supply Chain Dynamics of 3D Concrete Printing Construction Practice
  41. Els Heinrich, Zijl Gideon, Villiers Wibke (2025-06)
    A Review of Shrinkage and Restrained Shrinkage Cracking in 3D Concrete Printing
  42. Placzek Gerrit, Dahlberg Maike, Thormählen Jan, Schwerdtner Patrick (2025-06)
    How Productive Is 3D Concrete Printing?:
    A Systematic Review
  43. Gomez Jaramillo Laura, Luković Mladena, Šavija Branko, Zhou Wen (2025-06)
    Recycled Sand for 3D-Printed Strain Hardening Cementitious Composite:
    A Review of Recent Developments
  44. Garcés Gonzalo, García-Alvarado Rodrigo, Bunster Victor, Muñoz-Sanguinetti Claudia (2025-06)
    Additive Construction 4.0:
    A Systematic Review of 3D Concrete Printing for Construction 4.0
  45. Girskas Giedrius, Kligys Modestas (2025-06)
    3D Concrete Printing Review:
    Equipment, Materials, Mix Design, and Properties
  46. Si Wen, Khan Mehran, McNally Ciaran (2025-06)
    A Comprehensive Review of Rheological Dynamics and Process Parameters in 3D Concrete Printing
  47. Tao Yaxin, Wang Li, Wangler Timothy, Lesage Karel et al. (2025-05)
    A (P)Review:
    Adhesion of Printcrete for Tunnel Structures
  48. Nayaka Ramesh, Kumar H., Sharif Ahamed, Zhang Y. (2025-05)
    Exploring Key Aspects and Sustainable Benefits of 3D Concrete Printing (3DCP):
    A Selective Review
  49. Jaji Mustapha, Babafemi Adewumi, Zijl Gideon (2025-05)
    Mechanical Performance of Extrusion-Based Two-Part 3D-Printed Geopolymer Concrete:
    A Review of Advances in Laboratory and Real-Scale Construction Projects
  50. Luo Xiaoyu, Zhao Yuqi, Yao Xiaofei, Zou Cunjun et al. (2025-05)
    3D Printing Concrete Interface Treatment Based on Physical and Chemical Methods:
    A Review
  51. Das B., Prathap Y., Sandeep Ankit, Vaghamshi Keval et al. (2025-05)
    Reviewing the Materials Selection, Rheology, Durability, and Microstructural Characteristics of 3D Printed Concrete
  52. Mishra Sanjeet, Snehal K., Das B., Chandrasekaran Rajasekaran et al. (2025-05)
    From Printing to Performance:
    A Review on 3D Concrete Printing Processes, Materials, and Life Cycle Assessment
  53. Tanyildizi Harun, Seloglu Maksut, Bakri Abdullah Mohd, Razak Rafiza et al. (2025-04)
    The Rheological and Mechanical Properties of 3D-Printed Geopolymers:
    A Review
  54. Maralapalle Vedprakash, Kumavat Hemraj, Nadaf Maheboobsab, Zende Aijaz et al. (2025-04)
    Optimizing 3D Geopolymer Concrete for Sustainable Construction:
    A Review of Material Selection, Printing Methods, and Properties
  55. Pederson Federico, Ellersick Liam, Kim Heejeong (2025-04)
    A Review of Lunar Regolith Based Alkali Activated Materials and Sintered Regolith for Use as a Construction Material
  56. Oladunni Oluwole, Lee Carman, Ibrahim Idowu, Olanrewaju Oludolapo (2025-03)
    Advances in Sustainable Additive Manufacturing:
    A Systematic Review for Construction Industry to Mitigate Greenhouse Gas Emissions
  57. Mim Nusrat, Shaikh Faiz, Sarker Prabir (2025-03)
    Sustainable 3D Printed Concrete Incorporating Alternative Fine Aggregates:
    A Review
  58. Nieświec Martyna, Chajec Adrian (2025-03)
    Effect of Materials on the Properties of Fresh Cementitious Composites for 3D Printing:
    Short Review
  59. Gulati Hemant, Lu Tianxing (2025-03)
    Customized 3D Printable Concrete:
    A Systematic Review of Challenges, Methodologies, and Adoption Strategies
  60. Minde Pravin, Patil Jagruti (2025-03)
    A Comprehensive Review of Factors Affecting 3D Printing Technology Adaptation in the Indian Construction Sector
  61. Elango K., Saravanakumar R., Vivek D., Yuvaraj S. et al. (2025-01)
    A Critical Review of Fresh, Hardened and Durability Properties of 3D Printing Concrete
  62. Hassan Amer, Alomayri Thamer, Noaman Mohammed, Zhang Chunwei (2025-01)
    3D Printed Concrete for Sustainable Construction:
    A Review of Mechanical Properties and Environmental Impact
  63. Sakhare Vishakha, Najar Mohamed, Deshpande Sachin (2024-12)
    Printing Performance of 3D Printed Geopolymer Through Pumpability, Extrudability, Buildability Properties:
    A Review
  64. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa et al. (2024-12)
    From Local Earth to Modern Structures:
    A Critical Review of 3D Printed Cement Composites for Sustainable and Efficient Construction
  65. Tarhan Yeşim, Tarhan İsmail, Şahin Remzi (2024-12)
    Comprehensive Review of Binder Matrices in 3D Printing Construction:
    Rheological Perspectives
  66. Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-12)
    Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing Technology:
    Corrigendum
  67. Irshidat Mohammad, Cabibihan John-John, Fadli Fodil, Ramahi Siraj et al. (2024-12)
    Waste Materials Utilization in 3D Printable Concrete for Sustainable Construction Applications:
    A Review
  68. Khan Mirza, Ahmed Aayzaz, Ali Tariq, Qureshi Muhammad et al. (2024-12)
    Comprehensive Review of 3D Printed Concrete, Life Cycle Assessment, AI and ML Models:
    Materials, Engineered Properties and Techniques for Additive Manufacturing
  69. Silvestro Laura, Ribeiro Rodrigo, Navarrete Iván (2024-12)
    Advancements in Low Carbon-Emission Cements for 3D Printing:
    A State-of-the-Art Review
  70. Venugopal Reddy P., Nakkeeran G., Roy Dipankar, Alaneme George (2024-11)
    Evaluating the Use of Recycled Fine Aggregates in 3D Printing:
    A Systematic Review
  71. Dams Barrie, Chen Binling, Kaya Yusuf, Shepherd Paul et al. (2024-11)
    The Rise of Aerial Additive Manufacturing in Construction:
    A Review of Material Advancements
  72. Prasittisopin Lapyote (2024-11)
    How 3D Printing Technology Makes Cities Smarter:
    A Review, Thematic Analysis, and Perspectives
  73. Loaiza Sebastián, Ortiz Albert, Gómez Daniel, García Alvarez José et al. (2024-11)
    3D Printing Applied to Building Development Around the World:
    A Systematic Literature Review
  74. Murali Gunasekaran, Leong Sing (2024-11)
    Waste-Driven Construction:
    A State of the Art Review on the Integration of Waste in 3D Printed Concrete in Recent Researches for Sustainable Development
  75. Sousa Israel, Alessandro Antonella, Mesquita Esequiel, Laflamme Simon et al. (2024-11)
    Comprehensive Review of 3D Printed Cementitious Composites with Carbon Inclusions:
    Current Status and Perspective for Self-Sensing Capabilities
  76. Gyawali Biva, Haghnazar Ramtin, Akula Pavan, Alba Kamran et al. (2024-10)
    A Review on 3D Printing with Clay and Sawdust/Natural Fibers:
    Printability, Rheology, Properties, and Applications
  77. Dias José, Brandão Filipe, Figueiredo Bruno, Cruz Paulo (2024-09)
    The Potential of Natural Fiber-Reinforcement in 3D Printed Concrete:
    A Review
  78. Khan Mehran, McNally Ciaran (2024-09)
    A Review of Developments in Low-Carbon 3D Printed Concrete in Europe:
    Steps Towards Sustainable Construction
  79. Sood Sandeep, Lamba Yogveer, Singh Ashutosh (2024-09)
    Progress and Prospects of 3D and 4D Printing in Sustainable Development:
    A Scientometric Review
  80. Sovetova Meruyert, Kaiser Calautit John (2024-08)
    Thermal and Energy Efficiency in 3D Printed Buildings:
    Review of Geometric Design, Materials and Printing Processes
  81. Parida Lukesh, Moharana Sumedha (2024-08)
    Structural Health Monitoring for 3D Printed Civil Infrastructures:
    A Review of Challenges, Applications and Future Directions
  82. Ler Kee-Hong, Ma Chau-Khun, Chin Chee-Long, Ibrahim Izni et al. (2024-08)
    Porosity and Durability Tests on 3D Printing Concrete:
    A Review
  83. Huseien Ghasan, Tan Shea, Saleh Ali, Lim Nor et al. (2024-08)
    Test-Procedures and Mechanical Properties of Three-Dimensional Printable Concrete Enclosing Different Mix-Proportions:
    A Review and Bibliometric Analysis
  84. Alotaibi Badr, Ibrahim Shema Abdulsalam, Umar Ibrahim Abdullahi, Awad Abuhussain Mohammed et al. (2024-08)
    Assimilation of 3D Printing, Artificial Intelligence and Internet of Things for the Construction of Eco-Friendly Intelligent Homes:
    An Explorative Review
  85. Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-08)
    Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing-Technology
  86. Abbasnejad Behzad, Soltani Sahar, Karamoozian Amirhossein, Gu Ning (2024-08)
    A Systematic Literature Review on the Integration of Industry 4.0 Technologies in Sustainability Improvement of Transportation Construction Projects:
    State of the Art and Future Directions
  87. Farrokhsiar Paniz, Gürsoy Benay, Duarte José (2024-08)
    A Comprehensive Review on Integrating Vision-Based Sensing in Extrusion-Based 3D Printing Processes:
    Toward Geometric Monitoring of Extrusion-Based 3D Concrete Printing
  88. Rubeis Tullio, Ciccozzi Annamaria, Giusti Letizia, Ambrosini Dario (2024-07)
    On the Use of 3D Printing to Enhance the Thermal Performance of Building Envelope:
    A Review
  89. Baktheer Abedulgader, Claßen Martin (2024-07)
    A Review of Recent Trends and Challenges in Numerical Modeling of the Anisotropic Behavior of Hardened 3D Printed Concrete
  90. Asghari Y., Mohammadyan-Yasouj S., Petrů M., Ghandvar H. et al. (2024-07)
    3D Printing and Implementation of Engineered Cementitious Composites:
    A Review
  91. Barve Prasad, Bahrami Alireza, Shah Santosh (2024-07)
    A Comprehensive Review on Effects of Material-Composition, Mix-Design, and Mixing-Regimes on Rheology of 3D Printed Geopolymer Concrete
  92. Li Xinyi, Gao Yuyue, Zhou Yan, Han Wenbin et al. (2024-07)
    A Review on Design and Construction of the Lunar Launch/Landing Infrastructure
  93. Sadoughi Arezou, Kouhirostami Maryam, Kouhirostamkolaei Mahtab, Qi Bing et al. (2024-06)
    Autonomous Building Design for Manufacturing and Assembly:
    A Systematic Review of Design Application, Challenges, and Opportunities
  94. Ndarowa Tariro, Mahachi Jeffrey, Ikotun Bolane (2024-06)
    A Review of Optimization of Limestone and Calcined-Clay-Cement Concrete Mixtures for 3D Printing
  95. Zhuang Zicheng, Xu Fengming, Ye Junhong, Hu Nan et al. (2024-06)
    A Comprehensive Review of Sustainable Materials and Tool-Path-Optimization in 3D Concrete Printing
  96. Rahman Mahfuzur, Rawat Sanket, Yang Chunhui, Mahil Ahmed et al. (2024-05)
    A Comprehensive Review on Fresh and Rheological Properties of 3D Printable Cementitious Composites
  97. Mohamed Rania, Mohamed Abdelaziz (2024-05)
    Exploring the Environmental Benefits of 3D Printing Technology in Concrete Construction:
    A Review
  98. An Dong, Zhang Yixia, Yang Chunhui (2024-05)
    Incorporating Coarse Aggregates into 3D Concrete Printing from Mixture Design and Process-Control to Structural Behavior and Practical Applications:
    A Review
  99. Stout Ivy, Godfrey Grant, Dayley Jenna, Rodriguez Dexter et al. (2024-05)
    Concrete Mixture Properties and Designs for Additive Manufacturing:
    A Review of 3D Concrete Printing
  100. Alcayaga Restelli Adolfo, Avudaiappan Siva, Arrué Muñoz Ramón, Canales Cristian et al. (2024-04)
    Tailings as a Sustainable Resource in 3D Printed Concrete for the Mining Industry:
    A Literature Review
  101. Matus Ilse, Alves Jorge, Góis Joaquim, Vaz-Pires Paulo et al. (2024-04)
    Artificial Reefs Through Additive Manufacturing:
    A Review of Their Design, Purposes and Fabrication Process for Marine Restoration and Management
  102. Wang Xiaonan, Li Wengui, Guo Yipu, Kashani Alireza et al. (2024-04)
    Concrete 3D Printing Technology for Sustainable Construction:
    A Review on Raw Material, Concrete Type and Performance
  103. Zaid Osama, Ouni Mohamed (2024-04)
    Advancements in 3D Printing of Cementitious Materials:
    A Review of Mineral Additives, Properties, and Systematic Developments
  104. Hassan Habibelrahman, Rodriguez-Ubinas Edwin, Tamimi Adil, Trepci Esra et al. (2024-04)
    Towards Innovative and Sustainable Buildings:
    A Comprehensive Review of 3D Printing in Construction
  105. Calabrese Giuseppe, Hidding Arwin, Bier Henriette (2024-04)
    Review of Cementless Materials for 3D Printing of On- and Off-Earth Habitats
  106. Yang Liuhua, Gao Yang, Chen Hui, Jiao Huazhe et al. (2024-04)
    3D Printing Concrete Technology from a Rheology Perspective:
    A Review
  107. Lu Yue, Xiao Jianzhuang, Li Yan (2024-03)
    3D Printing Recycled Concrete Incorporating Plant-Fibers:
    A Comprehensive Review
  108. Kiruthiga K., Raju K., Venkatakrishnaiah R. (2024-03)
    A Short Review of 3D Printing from Construction Perspective
  109. Damarla Ravikanth, Lakshmi Keshav (2024-03)
    A Review on Impact-Assessment of 3D Printing Technology in the Field of Modern Construction
  110. Vigneshwari Are, Jayaprakash Jaganathan (2024-02)
    A Review on 3D Printable Cementitious Material Containing Copper and Iron-Ore-Tailings:
    Material-Characterization, Activation-Methods, Engineering-Properties, Durability, and Microstructure-Behavior
  111. Wang Xiaonan, Li Wengui, Guo Yipu, Kashani Alireza et al. (2024-02)
    Concrete 3D Printing Technology in Sustainable Construction:
    A Review on Raw Materials, Concrete Types and Performances
  112. Moraes Maria, Nagata Ester, Duran Afonso, Rossignolo João (2024-02)
    Alkali-Activated Materials Applied in 3D Printing Construction:
    A Review
  113. Gamage Kumari, Fawzia Sabrina, Zahra Tatheer, Teixeira Muge et al. (2024-02)
    Advancement in Sustainable 3D Concrete Printing:
    A Review on Materials, Challenges, and Current Progress in Australia
  114. Sahai Rajan, Bisht Ravindra, Malviya Nitesh, Kumar Shivam et al. (2024-01)
    Aspects of Waste-Material-Utilization and 3D Concrete Printer Development-Approach:
    A Review
  115. Fasihi Ali, Libre Nicolas (2024-01)
    From Pumping to Deposition:
    A Comprehensive Review of Test-Methods for Characterizing Concrete-Printability
  116. Wan Zhi, Xu Yading, He Shan, Schlangen Erik et al. (2024-01)
    The Use of Additive Manufacturing in Self-Healing Cementitious Materials:
    A State of the Art Review
  117. Chen Kailun, Liu Qiong, Chen Bing, Zhang Shishun et al. (2024-01)
    A Review on Effect of Raw Materials on the Performance of 3D Printed Geopolymer System for Construction
  118. Rocha Douglas, Faria Paulina, Lucas Sandra (2023-12)
    Additive Manufacturing of Earth-Based Materials:
    A Literature Review on Mortar-Composition, Extrusion, and Processing Earth
  119. Khan Shayan, Ghazi Syed, Amjad Hassan, Imram Muhammad et al. (2023-12)
    Emerging Horizons in 3D Printed Cement-Based Materials with Nano-Material-Integration:
    A Review
  120. Liu Ke, Takasu Koji, Jiang Jinming, Zu Kun et al. (2023-12)
    Mechanical Properties of 3D Printed Concrete Components:
    A Review
  121. Warsi Syed, Panda Biranchi, Biswas Pankaj (2023-12)
    Exploring Fiber Addition Methods and Mechanical Properties of Fiber-Reinforced 3D Printed Concrete:
    A Review
  122. Khan Mehran, McNally Ciaran (2023-11)
    A Holistic Review on the Contribution of Civil Engineers for Driving Sustainable Concrete Construction in the Built Environment
  123. Zhao Zengfeng, Ji Chenyuan, Xiao Jianzhuang, Yao Lei et al. (2023-11)
    A Critical Review on Reducing the Environmental Impact of 3D Printing Concrete:
    Material-Preparation, Construction-Process and Structure-Level
  124. Placzek Gerrit, Schwerdtner Patrick (2023-10)
    From Process to System:
    A Review on the Implications of Concrete 3D Printing on Project Delivery
  125. Kurniati Eka, Kim Heejeong (2023-10)
    Utilizing Industrial Byproducts for Sustainable Three-Dimensional-Printed Infrastructure Applications:
    A Comprehensive Review
  126. Chang Ze, Chen Yu, Schlangen Erik, Šavija Branko (2023-09)
    A Review of Methods on Buildability Quantification of Extrusion-Based 3D Concrete Printing:
    From Analytical Modelling to Numerical Simulation
  127. Živković Milijana, Žujović Maša, Milošević Jelena (2023-09)
    Architectural 3D Printed Structures Created Using Artificial Intelligence:
    A Review of Techniques and Applications
  128. Yin Xunzhi, Guo Chong, Sun Bo, Chen Honggang et al. (2023-09)
    The State of the Art in Digital Construction of Clay Buildings:
    Reviews of Existing Practices and Recommendations for Future Development
  129. Rudziewicz Magdalena, Maroszek Marcin, Góra Mateusz, Dziura Paweł et al. (2023-09)
    Feasibility Review of Aerated Materials Application in 3D Concrete Printing
  130. Motalebi Arash, Khondoker Mohammad, Kabir Golam (2023-08)
    A Systematic Review of Life Cycle Assessments of 3D Concrete Printing
  131. Paritala Spandana, Singaram Kailash, Bathina Indira, Khan Mohd et al. (2023-08)
    Rheology and Pumpability of Mix Suitable for Extrusion-Based Concrete 3D Printing:
    A Review
  132. Shilar Fatheali, Ganachari Sharanabasava, Patil Veerabhadragouda, Bhojaraja B. et al. (2023-08)
    A Review of 3D Printing of Geopolymer Composites for Structural and Functional Applications
  133. Tabassum Toiba, Ahmad Mir Ajaz (2023-08)
    A Review of 3D Printing Technology:
    The Future of Sustainable Construction
  134. Yemesegen Eden, Memari Ali (2023-07)
    A Review of Experimental Studies on Cob, Hempcrete, and Bamboo Components and the Call for Transition Towards Sustainable Home Building with 3D Printing
  135. Nguyen Ho, Thach Nguyen, Le Quang, Anh Yonghan (2023-07)
    A Review of Current Progress and Application of Machine Learning on 3D Printed Concrete
  136. Arrêteau Manon, Fabien Aurélie, Haddaji Badreddine, Chateigner Daniel et al. (2023-07)
    Review of Advances in 3D Printing Technology of Cementitious Materials:
    Key Printing Parameters and Properties Characterization
  137. Wang Chaofan, Chen Bing, Vo Thanh, Rezania Mohammad (2023-07)
    Mechanical Anisotropy, Rheology and Carbon Footprint of 3D Printable Concrete:
    A Review
  138. Bici Andjol, Yunitsyna Anna (2023-07)
    Analysis of 3D Printing Techniques for Building Construction:
    A Review
  139. Riaz Raja, Usman Muhammad, Ali Ammar, Majid Usama et al. (2023-06)
    Inclusive Characterization of 3D Printed Concrete in Additive Manufacturing:
    A Detailed Review
  140. Singh Narinder, Colangelo Francesco, Farina Ilenia (2023-06)
    Sustainable Non-Conventional Concrete 3D Printing:
    A Review
  141. Bello Nicholas, Memari Ali (2023-06)
    A Structural and Thermal Comparative Review of 3D Printed Wall Shapes
  142. Shenawa Amaal, Karoti Poonam (2023-06)
    3D Printing in Construction, Mixture Characteristics, Strength, and Thermal Performance-Review
  143. Ding Tao, Xiao Jianzhuang, Mechtcherine Viktor (2023-05)
    Microstructure and Mechanical Properties of Inter-Layer Regions in Extrusion-Based 3D Printed Concrete:
    A Critical Review
  144. Kokare Samruddha, Oliveira João, Godina Radu (2023-05)
    Life Cycle Assessment of Additive Manufacturing Processes:
    A Review
  145. Ambily Parukutty, Kaliyavaradhan Senthil, Rajendran Neeraja (2023-05)
    Top Challenges to Widespread 3D Concrete Printing Adoption:
    A Review
  146. Mujeeb Syed, Samudrala Manideep, Lanjewar Bhagyashri, Chippagiri Ravijanya et al. (2023-05)
    Development of Alkali-Activated 3D Printable Concrete:
    A Review
  147. Mogaji Iseoluwa, Mewomo Modupe, Toyin James (2023-05)
    Key Barriers to the Adoption of 3D Printing Innovation in Construction:
    A Review of Empirical Studies
  148. Bhushan Jindal Bharat, Jangra Parveen (2023-05)
    3D Printed Concrete:
    A Comprehensive Review of Raw Material’s Properties, Synthesis, Performance, and Potential Field Applications
  149. Simioni Fernanda, Rangel Bárbara, Campos Nadine, Teixeira João (2023-04)
    3D Printing for Construction:
    A Systematic Review of Its Sustainability
  150. Fan Dingqiang, Zhu Jinyun, Fan Mengxin, Lu Jianxian et al. (2023-04)
    Intelligent Design and Manufacturing of Ultra-High-Performance Concrete:
    A Review
  151. Razzaghian Ghadikolaee Mehrdad, Cerro-Prada Elena, Pan Zhu, Korayem Asghar (2023-04)
    Nanomaterials as Promising Additives for High-Performance 3D Printed Concrete:
    A Critical Review
  152. Noaimat Yazeed, Chougan Mehdi, Kheetan Mazen, Mandhari Othman et al. (2023-04)
    3D Printing of Limestone-Calcined-Clay-Cement:
    A Review of Its Potential Implementation in the Construction-Industry
  153. Gong Fangyuan, Cheng Xuejiao, Wang Qinghua, Chen Yi et al. (2023-04)
    A Review on the Application of 3D Printing Technology in Pavement Maintenance
  154. Ramezani Amir, Modaresi Shahriar, Dashti Pooria, Givkashi Mohammad et al. (2023-04)
    Effects of Different Types of Fibers on Fresh and Hardened Properties of Cement and Geopolymer-Based 3D Printed Mixtures:
    A Review
  155. Chen Hao, Zhang Daobo, Chen Peng, Li Ning et al. (2023-03)
    A Review of the Extruder System Design for Large-Scale Extrusion-Based 3D Concrete Printing
  156. Prasad Kudrekodlu, Vasugi V., Senthil Kumaran G. (2023-02)
    Application of 3D Printing Concepts in the Architecture Engineering and Construction Industry:
    A Scientometric Review
  157. Ishida Takato, Nakada Kiyofumi (2023-02)
    Review of Rheology in Cement-Based Materials and Its Application to 3D Printing Using Concrete
  158. Şahin Hatice, Mardani Ali (2023-02)
    Mechanical Properties, Durability Performance and Inter-Layer Adhesion of 3DPC Mixtures:
    A State‐of‐the‐art Review
  159. Basha Shaik, Rehman Atta, Aziz Md, Kim Jung-Hoon (2023-02)
    Cement Composites with Carbon-Based Nanomaterials for 3D Concrete Printing Applications:
    A Review
  160. Baigarina Akerke, Shehab Essam, Ali Md. (2023-02)
    Construction 3D Printing:
    A Critical Review and Future Research-Directions
  161. Tuvayanond Wiput, Prasittisopin Lapyote (2023-02)
    Design for Manufacture and Assembly of Digital Fabrication and Additive Manufacturing in Construction:
    A Review
  162. Ahmed Ghafur (2023-01)
    A Review of 3D Concrete Printing:
    Materials and Process Characterization, Economic Considerations and Environmental Sustainability
  163. Raphael Benny, Senthilnathan Shanmugaraj, Patel Abhishek, Bhat Saqib (2023-01)
    A Review of Concrete 3D Printed Structural Members
  164. Bello Nicholas, Memari Ali (2022-12)
    Comparative Review of the Technology and Case Studies of 3D Concrete Printing of Buildings by Several Companies
  165. Cao Chenyu, Sun Dongsheng, Xian Zhijun, Zhang Hengyu (2022-12)
    A Brief Review of 3D Printed Concrete
  166. Noaimat Yazeed, Ghaffar Seyed, Chougan Mehdi, Kheetan Mazen (2022-12)
    A Review of 3D Printing Low-Carbon Concrete with One-Part Geopolymer:
    Engineering, Environmental and Economic Feasibility
  167. Peng Yiming, Unluer Cise (2022-12)
    Development of Alternative Cementitious Binders for 3D Printing Applications:
    A Critical Review of Progress, Advantages and Challenges
  168. Li Zhengrong, Xing Wenjing, Sun Jingting, Feng Xiwen (2022-12)
    Multi-Scale Structural Characteristics and Heat-Moisture Properties of 3D Printed Building Walls:
    A Review
  169. Jiang Fangming, Long Xiong, Tian Likang, Tan Yan et al. (2022-12)
    Tensile Strain-Hardening Cementitious Composites and Its Practical Exploration Without Reinforcement:
    A Review
  170. Volpe Stelladriana, Sangiorgio Valentino, Fiorito Francesco, Varum Humberto (2022-12)
    Overview of 3D Construction Printing and Future Perspectives:
    A Review of Technology, Companies and Research Progression
  171. Zhou Yiyi, Jiang Dan, Sharma Rahul, Xie Yi et al. (2022-11)
    Enhancement of 3D Printed Cementitious Composite by Short Fibers:
    A Review
  172. Puzatova (nee Sharanova) Anastasiia, Shakor Pshtiwan, Laghi Vittoria, Dmitrieva Maria (2022-11)
    Large-Scale 3D Printing for Construction Application by Means of Robotic Arm and Gantry 3D Printer:
    A Review
  173. Strohle Max, Sadique Monower, Dulaimi Anmar, Kadhim Mustafa (2022-11)
    Prospect and Barrier of 3D Concrete:
    A Systematic Review
  174. Liu Kewei, Meng Qingfei, Kong Qingzhao, Zhang Xihong (2022-11)
    Review on the Developments of Structure, Construction Automation, and Monitoring of Intelligent Construction
  175. Salaimanimagudam M., Jayaprakash Jaganathan (2022-11)
    Optimum Selection of Reinforcement, Assembly, and Formwork System for Digital Fabrication Technique in Construction Industry:
    A Critical Review
  176. Chandrasekar Ravekumar, Gkantou Michaela, Nikitas Georgios, Hashim Khalid et al. (2022-10)
    Integration of 3D Concrete Printing in the Construction Industry:
    A Short Review
  177. Ibrahim Iman, Eltarabishi Fatma, Abdalla Hadeer, Abdallah Mohamed (2022-10)
    3D Printing in Sustainable Buildings:
    Systematic Review and Applications in the United Arab Emirates
  178. Qaidi Shaker, Yahia Ammar, Tayeh B., Unis H. et al. (2022-10)
    3D Printed Geopolymer Composites:
    A Review
  179. Niranjan Y., Channabasavanna S., Krishnapillai Shankar, Velmurugan Ramachandran et al. (2022-10)
    The Unprecedented Role of 3D Printing Technology in Fighting the COVID-19 Pandemic:
    A Comprehensive Review
  180. Boddepalli Uday, Panda Biranchi, Gandhi Indu (2022-09)
    Rheology and Printability of Portland-Cement-Based Materials:
    A Review
  181. Žujović Maša, Obradović Radojko, Rakonjac Ivana, Milošević Jelena (2022-08)
    3D Printing Technologies in Architectural Design and Construction:
    A Systematic Literature Review
  182. Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2022-08)
    Rheometry for Concrete 3D Printing:
    A Review and an Experimental Comparison
  183. Peralta Abadi Patricia, Smarsly Kay (2022-07)
    Requirements-Analysis of Additive Manufacturing for Concrete Printing:
    A Systematic Review
  184. He Chuan, Zhang Shiyu, Liang Youwang, Ahmad Waqas et al. (2022-07)
    A Scientometric Review on Mapping Research Knowledge for 3D Printing Concrete
  185. Ahmed Ghafur, Askandar Nasih, Jumaa Ghazi (2022-07)
    A Review of Large-Scale 3DCP:
    Material-Characteristics, Mix-Design, Printing-Process, and Reinforcement-Strategies
  186. Danish Aamar, Khurshid Kiran, Mosaberpanah Mohammad, Ozbakkaloglu Togay et al. (2022-06)
    Micro-Structural Characterization, Driving Mechanisms, and Improvement-Strategies for Inter-Layer Bond Strength of Additive Manufactured Cementitious Composites:
    A Review
  187. Gran Erik, Madrid Javier, Ortega Guillermo, Tenorio Ríos José et al. (2022-05)
    Conceptual Study and Literature Review of Integration of Lean Manufacturing and 3D Printing in Construction to Support Sustainability
  188. Biricik Öznur, Mardani Ali (2022-05)
    Parameters Affecting Thixotropic Behavior of Self-Compacting Concrete and 3D Printable Concrete:
    A State of the Art Review
  189. Saruhan Vedat, Keskinateş Muhammer, Felekoğlu Burak (2022-04)
    A Comprehensive Review on Fresh State Rheological Properties of Extrusion-Mortars Designed for 3D Printing Applications
  190. Tinoco Matheus, Mendonça Érica, Fernandez Letízia, Caldas Lucas et al. (2022-04)
    Life Cycle Assessment and Environmental Sustainability of Cementitious Materials for 3D Concrete Printing:
    A Systematic Literature Review
  191. Rollakanti Chiranjeevi, Prasad C. (2022-04)
    Applications, Performance, Challenges and Current Progress of 3D Concrete Printing Technologies as the Future of Sustainable Construction:
    A State of the Art Review
  192. Cao Xiangpeng, Yu Shiheng, Cui Hongzhi, Li Zongjin (2022-04)
    3D Printing Devices and Reinforcing Techniques for Extruded Cement-Based Materials:
    A Review
  193. Nodehi Mehrab, Ozbakkaloglu Togay, Gholampour Aliakbar (2022-04)
    Effect of Supplementary Cementitious Materials on Properties of 3D Printed Conventional and Alkali-Activated Concrete:
    A Review
  194. Liu Jie, Lv Chun (2022-03)
    Properties of 3D Printed Polymer Fiber-Reinforced Mortars:
    A Review
  195. Ranjan Rajeev, Kumar Deepak, Kundu Manoj, Chandra Moi Subhash (2022-03)
    A Critical Review on Classification of Materials Used in 3D Printing Process
  196. Sayegh Sameh, Romdhane Lotfi, Manjikian Solair (2022-03)
    A Critical Review of 3D Printing in Construction:
    Benefits, Challenges, and Risks
  197. Zhong Hui, Zhang Mingzhong (2022-02)
    3D Printing Geopolymers:
    A Review
  198. Guamán-Rivera Robert, Martínez-Rocamora Alejandro, García-Alvarado Rodrigo, Muñoz-Sanguinetti Claudia et al. (2022-02)
    Recent Developments and Challenges of 3D Printed Construction:
    A Review of Research Fronts
  199. Ali Md., Issayev Gani, Shehab Essam, Sarfraz Shoaib (2022-02)
    A Critical Review of 3D Printing and Digital Manufacturing in Construction Engineering
  200. Liu Junli, Nguyen Vuong, Panda Biranchi, Fox Kate et al. (2022-02)
    Additive Manufacturing of Sustainable Construction Materials and Form-Finding Structures:
    A Review on Recent Progresses
  201. Eugenin Claudia, Navarrete Iván, Brevis Wernher, Lopez Mauricio (2022-02)
    Air-Bubbles as an Admixture for Printable Concrete:
    A Review of the Rheological Effect of Entrained Air
  202. Dey Dhrutiman, Srinivas Dodda, Panda Biranchi, Suraneni Prannoy et al. (2022-02)
    Use of Industrial Waste-Materials for 3D Printing of Sustainable Concrete:
    A Review
  203. Bakar Muhammad, Saude Nasuha, Ibrahim Mustaffa, Ismail Nur (2022-01)
    Additive Manufacturing:
    A Review of Current 3D Concrete Printing on Materials, Methods, Applications, Properties and Challenges
  204. Gomaa Mohamed, Jabi Wassim, Soebarto Veronica, Xie Yi (2022-01)
    Digital Manufacturing for Earth Construction:
    A Critical Review
  205. Shakor Pshtiwan, Chu Shaohua, Puzatova (nee Sharanova) Anastasiia, Dini Enrico (2022-01)
    Review of Binder-Jetting 3D Printing in the Construction Industry
  206. Pasco Jubert, Lei Zhen, Aranas Clodualdo (2022-01)
    Additive Manufacturing in Off-Site Construction:
    Review and Future Directions
  207. Wu Zhengyu, Memari Ali, Duarte José (2022-01)
    State of the Art Review of Reinforcement-Strategies and Technologies for 3D Printing of Concrete
  208. Amran Mugahed, Abdelgader Hakim, Onaizi Ali, Fediuk Roman et al. (2021-12)
    3D Printable Alkali-Activated Concretes for Building Applications:
    A Critical Review
  209. Şahin Hatice, Mardani Ali (2021-12)
    Assessment of Materials, Design Parameters and Some Properties of 3D Printing Concrete Mixtures:
    A State of the Art Review
  210. Chen Yu, He Shan, Gan Yidong, Çopuroğlu Oğuzhan et al. (2021-11)
    A Review of Printing-Strategies, Sustainable Cementitious Materials and Characterization Methods in the Context of Extrusion-Based 3D Concrete Printing
  211. Pajonk Adam, Prieto Alejandro, Blum Ulrich, Knaack Ulrich (2021-11)
    Multi-Material Additive Manufacturing in Architecture and Construction:
    A Review
  212. Salleh Norhafizah, Jamalulail Nur, Abdul Hamid Noor, Jamellodin Zalipah et al. (2021-11)
    New Technology in 3D Concrete Printing by Using Ground-Granulated Blast-Furnace-Slag:
    A Review
  213. Tavangar Tooran, Hosseinpoor Masoud, Yahia Ammar, Khayat Kamal (2021-11)
    Computational Investigation of Concrete-Pipe-Flow:
    Critical Review
  214. Xu Zhen, Song Tao, Guo Shuai, Peng Jiangtao et al. (2021-10)
    Robotics Technologies Aided for 3D Printing in Construction:
    A Review
  215. Lyu Fuyan, Zhao Dongliang, Hou Xiaohui, Sun Li et al. (2021-10)
    Overview of the Development of 3D Printing Concrete:
    A Review
  216. Rollakanti Chiranjeevi, Prasad C., Joe Adams (2021-10)
    Digital Concrete for Sustainable Construction Industry:
    A State of the Art Review
  217. Prasad C. (2021-10)
    3D Concrete Printing Technology Current Progress and Future Perspective:
    A State of the Art Review
  218. Bedarf Patrick, Dutto Alessandro, Zanini Michele, Dillenburger Benjamin (2021-08)
    Foam 3D Printing for Construction:
    A Review of Applications, Materials, and Processes
  219. Jamali Koosha, Kaushal Vinayak, Najafi Mohammad (2021-07)
    Evolution of Additive Manufacturing in Civil Infrastructure Systems:
    A Ten-Year Review
  220. Leite Gabriela, Fontana Marcele (2021-07)
    Additive Manufacturing and the Evolution of the Construction Industry:
    A Systematic Literature Review 2015-2021
  221. Rehman Atta, Kim Jung-Hoon (2021-07)
    3D Concrete Printing:
    A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics
  222. Zhang Chao, Nerella Venkatesh, Krishna Anurag, Wang Shen et al. (2021-06)
    Mix-Design Concepts for 3D Printable Concrete:
    A Review
  223. Babafemi Adewumi, Kolawole John, Miah Md, Paul Suvash et al. (2021-06)
    A Concise Review on Inter-Layer Bond Strength in 3D Concrete Printing
  224. Pacillo Gerardo, Ranocchiai Giovanna, Loccarini Federica, Fagone Mario (2021-05)
    Additive Manufacturing in Construction:
    A Review on Technologies, Processes, Materials, and Their Applications of 3D and 4D Printing
  225. Schuldt Steven, Jagoda Jeneé, Hoisington Andrew, Delorit Justin (2021-03)
    A Systematic Review and Analysis of the Viability of 3D Printed Construction in Remote Environments
  226. Sikora Paweł, Chougan Mehdi, Cuevas Villalobos Karla, Liebscher Marco et al. (2021-02)
    The Effects of Nano- and Micro-Sized Additives on 3D Printable Cementitious and Alkali-Activated Composites:
    A Review
  227. Sandeep Bolugoddu, Kannan T., Chandradass J., Ganesan M. et al. (2021-02)
    Scope of 3D Printing in Manufacturing Industries:
    A Review
  228. Pessoa Ana Sofia, Guimarães Ana, Lucas Sandra, Simões Nuno (2021-02)
    3D Printing in the Construction Industry:
    A Systematic Review of the Thermal Performance in Buildings
  229. Mechtcherine Viktor, Buswell Richard, Kloft Harald, Bos Freek et al. (2021-02)
    Integrating Reinforcement in Digital Fabrication with Concrete:
    A Review and Classification Framework
  230. Krishnaraja A., Guru K. (2021-02)
    3D Printing Concrete:
    A Review
  231. Vallurupalli Kavya, Farzadnia Nima, Khayat Kamal (2021-01)
    Effect of Flow Behavior and Process-Induced Variations on Shape Stability of 3D Printed Elements:
    A Review
  232. Kristombu Baduge Shanaka, Navaratnam Satheeskumar, Zidan Yousef, McCormack Tom et al. (2021-01)
    Improving Performance of Additive Manufactured Concrete:
    A Review on Material Mix-Design, Processing, Inter-Layer Bonding, and Reinforcing-Methods
  233. Plessis Anton, Babafemi Adewumi, Paul Suvash, Panda Biranchi et al. (2020-12)
    Biomimicry for 3D Concrete Printing:
    A Review and Perspective
  234. Luhar Salmabanu, Suntharalingam Thadshajini, Navaratnam Satheeskumar, Luhar Ismail et al. (2020-12)
    Sustainable and Renewable Bio-Based Natural Fibers and Its Application for 3D Printed Concrete:
    A Review
  235. Hou Shaodan, Duan Zhenhua, Xiao Jianzhuang, Ye Jun (2020-12)
    A Review of 3D Printed Concrete:
    Performance-Requirements, Testing Measurements and Mix-Design
  236. Sepasgozar Samad, Shi Anqi, Yang Liming, Shirowzhan Sara et al. (2020-12)
    Additive Manufacturing Applications for Industry 4.0:
    A Systematic Critical Review
  237. Bester Frederick, Heever Marchant, Kruger Jacques, Zijl Gideon (2020-11)
    Reinforcing Digitally Fabricated Concrete:
    A Systems Approach Review
  238. Chung Jihoon, Lee Ghang, Kim Jung-Hoon (2020-10)
    A Systematic Review of the Geographic and Chronological Distributions of 3D Concrete Printers from 1997 to 2020
  239. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2020-10)
    Extrusion-Based Concrete 3D Printing from a Material Perspective:
    A State of the Art Review
  240. Hossain Md., Zhumabekova Altynay, Paul Suvash, Kim Jong (2020-10)
    A Review of 3D Printing in Construction and Its Impact on the Labor Market
  241. Kruger Jacques, Zijl Gideon (2020-10)
    A Compendious Review on Lack-of-Fusion in Digital Concrete Fabrication
  242. Šavija Branko (2020-09)
    Use of 3D Printing to Create Multi-Functional Cementitious Composites:
    Review, Challenges and Opportunities
  243. Pudjisuryadi Pamuda, Antoni Antoni, Chandra Jimmy (2020-09)
    Review on 3D Printed Concrete as Structural Beam Members
  244. Makul Natt (2020-07)
    Advanced Smart Concrete:
    A Review of Current Progress, Benefits and Challenges
  245. Li Zhanzhao, Hojati Maryam, Wu Zhengyu, Piasente Jonathon et al. (2020-07)
    Fresh and Hardened Properties of Extrusion-Based 3D Printed Cementitious Materials:
    A Review
  246. Khan Mohd (2020-04)
    Mix Suitable for Concrete 3D Printing:
    A Review
  247. Paolini Alexander, Kollmannsberger Stefan, Rank Ernst (2019-10)
    Additive Manufacturing in Construction:
    A Review on Processes, Applications, and Digital Planning Methods
  248. Zhang Jingchuan, Wang Jialiang, Dong Sufen, Yu Xun et al. (2019-07)
    A Review of the Current Progress and Application of 3D Printed Concrete
  249. Bhardwaj Abhinav, Jones Scott, Kalantar Negar, Pei Zhijian et al. (2019-06)
    Additive Manufacturing Processes for Infrastructure Construction:
    A Review
  250. Wangler Timothy, Roussel Nicolas, Bos Freek, Salet Theo et al. (2019-06)
    Digital Concrete:
    A Review
  251. Urhal Pinar, Weightman Andrew, Diver Carl, Bartolo Paulo (2019-05)
    Robot-Assisted Additive Manufacturing:
    A Review
  252. Geneidy Omar, Ismaeel Walaa, Abbas Ayman (2019-04)
    A Critical Review for Applying Three-Dimensional Concrete Wall Printing Technology in Egypt
  253. Lu Bing, Weng Yiwei, Li Mingyang, Qian Ye et al. (2019-02)
    A Systematical Review of 3D Printable Cementitious Materials
  254. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Malek Sardar (2019-01)
    Review of Emerging Additive Manufacturing Technologies in 3D Printing of Cementitious Materials in the Construction Industry
  255. Wangler Timothy (2018-11)
    Digital Concrete Processing:
    A Review
  256. Schutter Geert, Lesage Karel (2018-09)
    Active Control of Properties of Concrete:
    A (P)Review
  257. Paul Suvash, Zijl Gideon, Tan Ming, Gibson Ian (2018-05)
    A Review of 3D Concrete Printing Systems and Materials Properties:
    Current Status and Future Research Prospects
  258. Yin Hongxi, Qu Ming, Zhang Haiyan, Lim YeChan (2018-04)
    3D Printing and Buildings:
    A Technology Review and Future Outlook
  259. Ngo Tuan, Kashani Alireza, Imbalzano Gabriele, Nguyen Quynh et al. (2018-02)
    Additive Manufacturing (3D Printing):
    A Review of Materials, Methods, Applications and Challenges
  260. Delgado Camacho Daniel, Clayton Patricia, Brien William, Seepersad Carolyn et al. (2018-02)
    Applications of Additive Manufacturing in the Construction Industry:
    A Forward-Looking Review
  261. Chen Yu, Çopuroğlu Oğuzhan, Veer Frederic (2018-01)
    A Critical Review of 3D Concrete Printing as a Low-CO2 Concrete Approach
  262. Ma Guowei, Wang Li (2017-08)
    A Critical Review of Preparation Design and Workability Measurement of Concrete Material for Large-Scale 3D Printing
  263. Delgado Camacho Daniel, Clayton Patricia, Brien William, Ferron Raissa et al. (2017-07)
    Applications of Additive Manufacturing in the Construction Industry:
    A Prospective Review
  264. Tay Yi, Panda Biranchi, Paul Suvash, Mohamed Nisar et al. (2017-05)
    3D Printing Trends in Building and Construction Industry:
    A Review
  265. Wu Peng, Wang Jun, Wang Xiangyu (2016-04)
    A Critical Review of the Use of 3D Printing in the Construction Industry
  266. Perkins Isaac, Skitmore Martin (2015-03)
    Three-Dimensional Printing in the Construction Industry:
    A Review