Skip to content

#strength

Keywords by Co - Occurrence

  1. Chourasia Ajay, Pal Biswajit, Kapoor Ashish, Kumar R. (2026-04)
    Influence of Mix Constituents on the Printability and Compressive Strength of Binary and Ternary Cementitious Composite Made of Agro-Industrial Waste
  2. Akula Pavan, Ray Saswati, Bastola Ashish, Masoomi Maryam et al. (2026-04)
    Suction-Based Framework of 3D-Printed Earthen Materials:
    Linking Geotechnical Properties, Buildability, and Strength
  3. Xu Wenbin, Xu Zihao, Liu Tao, Ouyang Jun et al. (2026-03)
    A Prediction Model of Interlayer Bond Strength for 3D-Printed Concrete Considering Printing Interval and Environmental Effects
  4. Lu Pengyuan, Yang Yekai, Zhao Qingxin, Liu Zhongxian et al. (2026-03)
    Low-Carbon 3D-Printed Geopolymer Ultra-High-Strength Concrete Enabled by Soda Residue:
    Sustainable Development and Environmental Impact Assessment
  5. Punurai Wonsiri, Liu Yiliu (2026-03)
    Integrating Machine Learning with 3D Printing Concrete for Marine Structures:
    Mix Design, Strength Assessment, and Carbon Footprint Prediction
  6. Jiang Youbau, Zhang Zupan, Wen Jun, Gao Pengxiang et al. (2026-03)
    Toothed Nozzle Optimization for Enhancement of Interlayer Tensile Strength of 3D-Printed Concrete with CTGAN and XGBoost Model
  7. Žižková Nikol, Válek Josef, Vespalec Arnošt, Melichar Jindřich et al. (2026-03)
    Layer Bond Strength in 3D-Printed Concrete:
    The Role of Interlayer Surface Area and Printing Delay Time
  8. Hinge Pawan, Bhagat Rajesh, Nandurkar Bhupesh, Pande Prashant et al. (2026-03)
    Sustainable 3D-Printed Concrete:
    Integrating E-Waste Plastics for Enhanced Printability, Mechanical Strength, and Long-Term Durability Sets
  9. Saelens Lien, Wan-Wendner Roman, Caspeele Robby, Tittelboom Kim (2026-03)
    Anisotropy of 3D Printed Concrete Strength and Elasticity for a Well-Developed One-Component and Two-Component Concrete Mixture
  10. Hu Zhiheng, Elchalakani Mohamed, Ayough Pouria, Yang Bo et al. (2026-03)
    Determination of Tensile Strength and Fracture Toughness of 3D-Printed Ultra-Lightweight Engineered Cementitious Composites Reinforced with Fibre-Reinforced Polymer Mesh
  11. Khalil Jawad, Fakih Amin, Yaseen Zaher, Osta Mohammed et al. (2026-02)
    Influence of Chemical Components and Molar Ratios on Strength Development of One-Part Alkali-Activated Mortar: Ensemble Machine Learning Models
  12. Versteege Jelle, Salet Theo, Wolfs Robert (2026-02)
    Sensory Data Mapping and Database Development for Interlayer Bond Strength:
    Towards Digital Shadows in 3D Concrete Printing
  13. Mo Jinxu, Lu Han, Ren Fengming, Lai Mianheng et al. (2026-02)
    Impact of Waste Rubber Powder Size and Replacement Ratio on the Compressive Strength Anisotropy and Pore Structure of 3D Printed Concrete
  14. Garshasbi Sajad, Mousavi Seyed, Nazarpour Hadi, Dehestani Mehdi (2026-02)
    Low Carbon Dioxide 3D Printable Concrete:
    Balancing Rheology, Strength and Environmental Impact Using Bentonite and Ground Granulated Blast-Furnace Slag
  15. Yuan Yong, Zia Syed, Sheikh Taimur, Irfan ul Hassan Muhammad et al. (2026-02)
    Enhancing Interlayer Bond Strength of 3D-Printed Concrete Through Microstructural Densification by Means of Incorporating Sugarcane Bagasse Ash
  16. Fang Yuan, Zhang Wenyang, Xiao Yuan, Zhang Zuhua et al. (2026-02)
    Enhancing the Printability and Mechanical Strength of 3D-Printed Geopolymers through Li2O-Al2O3-SiO2-H2O System Regulation
  17. Hasan Kamrul, Alias Aizat, Hasan Mehedi, Yahaya Fadzil et al. (2026-02)
    Designing 3D-Printed Concrete with Ternary Blended Mortars Incorporating Fly Ash and Silica Fume:
    Effects of Low Water-Binder Ratios on Workability and Strength
  18. Li Junjie, Li Yangbo, Ge Xianqiang, Li Ke et al. (2026-01)
    Strength Enhancement of 3D-Printed Phosphogypsum Concrete Based on Synergistic Activation of Multi-Solid Wastes
  19. Jhun Jihye, Lee Junghyun, Paul Suvash, Lim Sean et al. (2026-01)
    Potential of Rice Husk Biochar in 3D Concrete Printing:
    An Analysis of Fresh-State Rheology, Strength Retention, and Carbon Sequestration
  20. Liu Xingzi, Buswell Richard, Cavalaro Sergio, Xu Jie et al. (2026-01)
    Influence of Inter-Filament Voids on the Failure Mechanism and Compressive Strength of 3D Printed Concrete
  21. Gil-Lopez Tomas, Amirfiroozkoohi Alireza, Valiente López María, Verdu-Vazquez Maria (2026-01)
    The Impact of 3D Printing on Mortar Strength and Flexibility:
    A Comparative Analysis of Conventional and Additive Manufacturing Techniques
  22. Sahai Rajan, Bisht Ravindra, Malik Lavanya, Rahman Mohamed et al. (2026-01)
    Strength Evaluation of 3D Concrete Printed Layers Using in-Situ Parameters Monitoring
  23. Mohammed Salhah, Aljewifi Hana, Jldain Hafeth (2025-12)
    Evaluating Compressive Strength in 3D-Printed Concrete Structures:
    A Comparative Study of ANSYS Simulations and Experimental Data
  24. Bang Jin, Ha Seong, Jun Yubin, Yim Hong (2025-12)
    Optimal Casting Window Defined by Electrical Resistivity for Enhancing Interfacial Bond Strength in 3D Printed-Cast Concrete Composites
  25. Iqbal Imtiaz, Kasim Tala, Besklubova Svetlana, Mustafa Ali et al. (2025-12)
    Passive Determination of Anisotropic Compressive Strength of 3D Printed Concrete Using Multiple Neural Networks Enhanced with Explainable Machine Learning (XML)
  26. Iqbal Imtiaz, Inqiad Waleed, Kasim Tala, Besklubova Svetlana et al. (2025-12)
    Strength Characterisation of Fly Ash Blended 3D Printed Concrete Enhanced with Explainable Machine Learning
  27. Wen Kuo-Wei, Su Yen-Fang, Mo Kim, Hung Chung-Chan (2025-12)
    Time-Dependent Rheology, Green Strength, and Buildability of 3D-Printed Ultra-High Performance Concrete Incorporating Various Fiber Types and Contents
  28. Soshinskiy Olexander, Rashkevich Nina, Shakhov Stanislav, Melnychenko Andrii (2025-11)
    Formulating a Calculation Methodology for Assessing the Strength Characteristics of Building Structures Constructed with a Construction 3D Printer
  29. Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-11)
    Multi-Scale Analysis of 3D Printable High-Strength Engineered Cementitious Composite with Carbon and Polyethylene Fibers:
    Rheology, Printability and Hydration Kinetics in Structural Components
  30. Changez Kashif, Aslam Jawad, Bhutta Muhammad, Butt Shahid (2025-11)
    Hybrid Additive Strategies for Sustainable 3D Concrete Printing:
    Balancing Printability, Early-Stage Strength, and Eco-Efficiency
  31. Janani Parthiban, Ganesh G. (2025-11)
    Synergistic Effects of Polypropylene Fibers on the Strength and Durability Properties of 3D Printed Concrete
  32. Li Yeou-Fong, Lin Chih-Chieh, Syu Jin-Yuan, Huang Chih-Hong et al. (2025-10)
    Enhancing 3D-Printed Cement Mortar with Recycled PCB Glass Fibers:
    Printability, Mechanical Strength, and FEM-Based Structural Assessment
  33. Mostert Jean-Pierre, Kruger Jacques (2025-10)
    Numerically Optimised Filament Surface Topology Towards Maximum Bond Strength in 3D Printed Concrete
  34. Albostami Asad, Mohammad Malek, Ismael Bashar, Hamd Rwayda (2025-10)
    Optimized Strength Predictions for 3D Printed Fiber-Reinforced Concrete:
    Machine Learning-Driven Insights
  35. Simwanda Lenganji, David Abayomi, Gatheeshgar Perampalam, Olalusi Oladimeji et al. (2025-10)
    Optimisation of Interlayer Bond Strength in 3D-Printed Concrete Using Response Surface Methodology and Artificial Neural Networks
  36. Verma Shilpi, Parghi Anant (2025-10)
    Machine Learning-Based Prediction of Compressive Strength in Additive Manufacturing of Concrete Technology
  37. Das Jyotish, Pratama M., Nematollahi Behzad, Guadagnini Maurizio (2025-10)
    Durability Performance of 3D-Printed Ultra-High Strength Concrete Incorporating Corrosion Inhibitor
  38. Uddin Md, Mostazid Md, Faysal Md, Shi Xinjun (2025-10)
    Developing a Novel Strength Predictive Modeling for 3D Printable Geopolymer Concrete:
    An Interpretable Data-Driven Approach
  39. Varghese Renny, Rangel Bárbara, Maia Lino (2025-10)
    Strength, Structure, and Sustainability in 3D-Printed Concrete Using Different Types of Fiber Reinforcements
  40. Luo Rui, Sun Bin, Fei Xiangpeng, Du Hongjian (2025-10)
    Interlayer Strength Loss in 3D Printed Concrete Due to Time-Gap-Induced Macroporosity
  41. Shekhar Shashank, Kumar Manish, Mathur Rishabh (2025-10)
    Additive Manufacturing of Concrete with Low Initial Yield Strength Through Controlled Heating of Printed Layers
  42. Thajeel Marwah, Chalawi Ameen, Balázs György (2025-09)
    Printability and Strength of 3D-Printed Concrete:
    Role of Mix Design and Printing Parameters
  43. Akter Usmi, Rezvi Syed, Ratul Md., Kishor Saad (2025-09)
    Optimization of Data-Driven Ensemble Models Using Firefly Algorithm for Enhanced 3D Printed Concrete Strength Prediction
  44. Zhou Juanlan, Shi Xiangwen, Zheng Hongrun, Jin Ruoyu et al. (2025-09)
    Investigating the Effects of Hybrid PVA/BF Fibers in Low-Carbon 3D Printed Concrete with Recycled Aggregates:
    Rheology, Strength, and Anisotropy
  45. Anwar Muhammad, Zhu Xingyi, Zhang Yating, Wang Jiakang et al. (2025-09)
    Synergistic Effects of Microwave Curing Regimes on Early, Mid, and Long-Term Strengths and Microstructural Performance of Fly Ash-Slag Based 3D-Printed Geopolymers
  46. Li Leo, Xiao Bofeng, Kou Shi-cong (2025-09)
    Influences of Fiber Length on the Printability and Strength of Glass Fiber-Reinforced 3D-Printed Mortar
  47. Liu Shijie, Liu Tong, Alqurashi Muwaffaq, Abdou Elabbasy Ahmed et al. (2025-09)
    Advancing 3D-Printed Fiber-Reinforced Concrete for Sustainable Construction:
    A Comparative Optimization Based Study of Hybrid Machine Intelligence Models for Predicting Mechanical Strength and CO₂ Emissions
  48. Lin Manfang, Ding Yao, Yu Fan, Li Lingzhi et al. (2025-08)
    Synergistic Strengthening of 3D‑printed ECC Beams Through Steel-Wire Mesh and Interfaces Treatments
  49. Motiani Ronak, Sylvain Saha, Dalal Sejal, Vora Jay et al. (2025-08)
    Innovative Reinforcement Techniques for 3D-Printed Concrete:
    The Impact of Shape Memory Alloys on Flexural Strength and Crack Mitigation
  50. Abid Khasim, Syed Sajid, Khan Majid (2025-08)
    Explainable Machine Learning-Based Model for Predicting Interlayer Bond Strength in 3D Printed Concrete
  51. Kumar Rohan, Das Nabodyuti, Nanthagopalan Prakash (2025-08)
    Novel Interlocking Nozzle Geometry for Enhanced Interlayer Strengthening in 3D Concrete Printing
  52. Lu Qianyang, Mei Song, Ateah Ali, Alsubeai Ali et al. (2025-08)
    Investigating the Strength Performance of 3D Printed Fiber-Reinforced Concrete Using Applicable Predictive Models
  53. Xiahou Xiaer, Ding Xingyuan, Yu Ke-Ke, Lu Cong (2025-08)
    From Waste to Strength:
    Sustainable Valorization of Modified Recycled PET Fibers for Rheological Control and Performance Enhancement in 3D Printed Concrete
  54. Ravichandran Darssni, Prem Prabhat, Bhaskara Gollapalli, Maheswaran Srinivasan et al. (2025-07)
    Time-Dependent Properties of 3D Printable Plain and Fibered High Strength Concrete Incorporating Copper Slag as an Alternate Fine Aggregate
  55. Sahebi Soleyman, Aslani Farhad (2025-07)
    Mechanical Strength and Heat Tolerance of 3D Printed Rubberised Concrete at Elevated Temperatures
  56. Anop Darya, Sadenova Marzhan, Beisekenov Nail, Rudenko Olga et al. (2025-07)
    Additive Manufacturing as an Alternative to Core Sampling in Concrete Strength Assessment
  57. Cao Yifang, Shen Luming, Mukherjee Abhijit, Abbas Ali et al. (2025-07)
    Improvement of the Interlayer Bonding Strength in a 3D-Printed Mortar with Biocement Sprayed into Interlayer Surfaces
  58. Srinivas Dodda, Panda Biranchi, Suraneni Prannoy, Sitharam Thallak (2025-06)
    Mix Design Optimization of 3D-Printed Cementitious Composites for Marine Applications:
    Impact of Binder Composition, Accelerated Carbonation, and PVA Fibers on Strength and Durability
  59. Mechtcherine Viktor, Muthukrishnan Shravan, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
    Compressive Strength and Modulus of Elasticity:
    Mechanical Properties of 3D Printed Concrete
  60. Wolfs Robert, Versteege Jelle, Santhanam Manu, Bhattacherjee Shantanu et al. (2025-06)
    Flexural and Tensile Strength:
    Mechanical Properties of 3D Printed Concrete
  61. Khodadadi Nima, Roghani Hossein, Caso Francisco, Kenawy El‐Sayed et al. (2025-06)
    Machine Learning Approach for the Flexural Strength of 3D‐Printed Fiber‐reinforced Concrete Based on the Meta‐heuristic Algorithm
  62. Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-06)
    Enhancing Interfacial Bonding and Pore Structure Optimization in 3D-Printed High-Strength ECC with Steel-PE Hybrid Fibers
  63. Ewerz Johannes, Pfleger Marc-Patrick, Radl Elisabeth, Huber Patrick (2025-06)
    Concrete 3D Printing and Reinforcement:
    Determination of Bond Strength Through Pull-Out Tests
  64. Alizamir Meysam, Kim Sungwon, Ikram Rana, Ahmed Kaywan et al. (2025-06)
    A Reliable Hybrid Extreme Learning Machine-Metaheuristic Framework for Enhanced Strength Prediction of 3D-Printed Fiber-Reinforced Concrete
  65. Irshidat Mohammad, Albeitjali Naeem, Amjad Umar, Alnuaimi Hamad et al. (2025-05)
    From Waste to Strength:
    Recycled Steel Fibers for Sustainable 3D Printing of Cementitious Composites
  66. Kuang Hao, Deng Yang, Wang Dong, Jian Shouwei et al. (2025-05)
    Strengthening Effect of In-Situ Sprayed UV-Curable Polyurethane-Acrylate Resin Coating on Slag-Based 3D Printing Concrete
  67. Chandra Jimmy, Halim Alvin, Budiman Franky, Pudjisuryadi Pamuda et al. (2025-05)
    Experimental Study of Bond Strength of Embedded Steel Reinforcement in Vibration-Based 3D Printed Concrete Mortar
  68. Zuo Zibo, Tao Yaxin, Huang Yulin, Zhang Longlong et al. (2025-04)
    Real-Time Temperature Monitoring to Evaluate the Strength Evolution of 3D Printed Concrete:
    From Lab to In-Situ Printing
  69. Zhao Herui, Jiang Quan, Xia Yong, Hou Dongqi et al. (2025-04)
    Microbial-Induced Calcareous Precipitation Effect on Tensile Strength and Early Age Shrinkage of 3D Printed Concrete
  70. Sikora Paweł, Skibicki Szymon, Chougan Mehdi, Szewczyk Piotr et al. (2025-03)
    Silica-Coated Admixtures of Bismuth and Gadolinium Oxides for 3D Printed Concrete Applications:
    Rheology, Hydration, Strength, Microstructure, and Radiation Shielding Perspective
  71. Banijamali Kasra, Dempsey Mary, Chen Jianhua, Kazemian Ali (2025-02)
    Machine Learning Approach to Predict the Early-Age Flexural Strength of Sensor-Embedded 3D-Printed Structures
  72. Bayat Hamid, Karimpouli Sagegh, Yang Liming, Ramandi Hamed et al. (2025-02)
    Investigation of Interlayer Bonding and Pore Characteristics in 3D-Printed High-Strength Mortar Incorporating Recycled Lightweight Aggregates
  73. Sapata Alise, Šinka Māris, Šahmenko Genādijs, Korat Bensa Lidija et al. (2025-02)
    Establishing Benchmark Properties for 3D-Printed Concrete:
    A Study of Printability, Strength, and Durability
  74. Chen Wenguang, Liang Long, Zhou Boyang, Ye Junhong et al. (2025-02)
    A Fracture Mechanics Model for Predicting Tensile Strength and Fracture Toughness of 3D Printed Engineered Cementitious Composites
  75. Yu Jie, Teng Fei, Ye Junhong, Zhang Dong et al. (2025-01)
    Size-Dependent Model to Predict the Flexural-Strength of 3D Printed Engineered Cementitious Composites Beams
  76. Shazad Qamar, Li Fangyuan (2025-01)
    Interfacial Bond-Effects on Shear-Strength and Damage in 3D Printed Concrete Structures:
    A Combined Experimental and Numerical Study
  77. Li Leo, Zhang Guang-Hu, Kwan Albert (2025-01)
    Exploring Submarine 3D Printing:
    Enhancing Washout-Resistance and Strength of 3D Printable Mortar
  78. Licciardello Lucia, Soto Alejandro, Kaufmann Walter, Metelli Giovanni (2025-01)
    Determining the Strength of 3D Printed Concrete with the Modified Slant-Shear-Test
  79. Vysochinskiy Dmitry, Madsen Gunnar, Lande Ingrid (2025-01)
    An Experimental Study of Consistency and Strength Variation of 3D Printed Concrete Mixes
  80. Lyu Qifeng, Wang Yalun, Chen Dongjian, Liu Shiyuan et al. (2025-01)
    Energy Storage Properties and Mechanical Strengths of 3D Printed Porous Concrete Structural Supercapacitors Reinforced by Electrodes Made of Carbon-Black-Coated Ni Foam
  81. Liu Qiong, Wang Qiming, Sun Chang, Li Jiawang et al. (2025-01)
    Inter-Layer Shear Strength and Bonding Strength of Sinuous 3D Printed Mortar
  82. Mousavi Moein, Bengar Habib, Mousavi Fateme, Mahdavinia Pooneh et al. (2024-12)
    Inter-Layer Bond Strength Prediction of 3D Printable Concrete Using Artificial Neural Network:
    Experimental and Modeling Study
  83. Liu Huawei, Wang Yifei, Zhu Chao, Wu Yiwen et al. (2024-11)
    Design of 3D Printed Concrete Masonry for Wall Structures:
    Mechanical Behavior and Strength Calculation Methods Under Various Loads
  84. Luo Surong, Jin Wenhao, Wu Weihong, Zhang Kaijian (2024-11)
    Rheological and Mechanical Properties of Polyformaldehyde-Fiber-Reinforced 3D Printed High-Strength Concrete with the Addition of Fly-Ash
  85. Han Xiaoyu, Yan Jiachuan, Huo Yanlin, Chen Tiefeng (2024-11)
    Effect of Carbonation-Curing-Regime on 3D Printed Concrete:
    Compressive Strength, CO2 Uptake, and Characterization
  86. Arif Muhammad, Jan Faizullah, Rezzoug Aïssa, Afridi Muhammad et al. (2024-11)
    Data-Driven Models for Predicting Compressive Strength of 3D Printed Fiber-Reinforced Concrete Using Interpretable Machine Learning Algorithms
  87. Zhao Herui, Jiang Quan, Xia Yong, Liu Jian et al. (2024-11)
    Microbial-Induced Carbonate Reinforcement for 3D Printed Concrete:
    Testing in Printable and Mechanical Strength
  88. Gholami Shayan, Kim Yong-Rak, Salehi Faezeh (2024-10)
    Strengthening and 3D Printing of Magnesium-Silicate-Hydrate Binder for Martian Construction
  89. Shahib Al Bari M., Ekaputri Januarti (2024-09)
    The Effect of Fiber on the Green Strength and Buildability of High-Strength 3D Printing Concrete
  90. He Lewei, Pan Jiahui, Hee Yu, Chen Hao et al. (2024-09)
    Development of Novel Concave and Convex Trowels for Higher Inter-Layer Strength of 3D Printed Cement-Paste
  91. Ivaniuk Egor, Mechtcherine Viktor (2024-09)
    A Method for Measuring the Bond Strength Between Impregnated Carbon-Yarn and 3D Printed Strain-Hardening Cementitious Composites
  92. Wang Xianggang, Dong Enlai, Jia Zijian, Jia Lutao et al. (2024-09)
    Specimen-Size-Effect on Compressive Strength of 3D Printed Concrete Containing Coarse Aggregate with Varying Water-to-Binder-Ratios
  93. Ma Xin-Rui, Wang Xian-Lin, Chen Shi-Zi (2024-09)
    Trustworthy Machine Learning-Enhanced 3D Concrete Printing:
    Predicting Bond Strength and Designing Reinforcement Embedment Length
  94. Hojati Maryam, Sedghi Reza, Li Zhanzhao, Memari Ali et al. (2024-09)
    Flexural Strength of 3D Printed Concrete Beams:
    Exploring Barbed-Wire Reinforcement and Cross-Sectional Geometry
  95. Versteege Jelle, Wolfs Robert, Salet Theo (2024-09)
    A Data-Driven View on Digital Fabrication with Concrete:
    The Case of Inter-Layer Bond Strength
  96. Negron-McFarlane Christian, Kreiger Eric, Kreiger Megan (2024-09)
    Determination of Print Speed Based on the Fresh Mechanical Strength over Time of Additively Constructed Concrete by Unconfined Compression
  97. Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-09)
    Enhancing Inter-Layer Bond Strength and Flexural Performance in 3D Concrete Printing with SHCC Bonding Agents
  98. Muy Yeakleang, Courard Luc, Bulteel David, Rémond Sébastien et al. (2024-09)
    Influence of Nozzle-Diameter on the Anisotropy of Compressive Strength:
    Measured on 3D Printing Concrete Designed with Recycled Fine Aggregates
  99. Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2024-09)
    Comparative Study into the Inter-Layer Bond Strength of 3D Printed Mortar:
    Underwater vs. Air Environments
  100. Yu Jie, Weng Yiwei, Teng Fei, Ye Junhong et al. (2024-09)
    Prediction of the Flexural Strength of 3D Printed SHCC Beams Based on a Stochastic Size-Dependent Model
  101. Farra Ramzi, Dhers Sébastien, Silva Wilson (2024-09)
    Enhancing Early Strength in LC3 3DCP with Advanced Chemical Admixtures
  102. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Gawady Mohamed (2024-08)
    Exploration of the Open-Time and Compressive Strength of Alkali-Activated Mixtures for 3D Printed Concrete
  103. Li Leo, Zhang Guang-Hu (2024-08)
    Feasibility of Underwater 3D Printing:
    Effects of Anti-Washout-Admixtures on Printability and Strength of Mortar
  104. Prathipati S., Vardhan J., Murali D., Nithin C. et al. (2024-08)
    An Experimental Study on the Effect of a Viscosity-Modifying-Agent on the Rheological and Strength Behavior of 3D Printed Concrete
  105. Liu Xiongfei, Cai Huachong, Sun Yuhang, Wang Li et al. (2024-08)
    Spray-Based 3D Printed Foam-Concrete:
    Cooperative Optimization for Lightweight and High-Strength Performance
  106. Banijamali Kasra, Vosoughi Payam, Arce Gabriel, Noorvand Hassan et al. (2024-08)
    Automated Strength Monitoring of 3D Printed Structures via Embedded Sensors
  107. Zhang Kaijian, Lin Wenqiang, Zhang Qingtian, Wang Dehui et al. (2024-07)
    Evaluation of Anisotropy and Statistical Parameters of Compressive Strength for 3D Printed Concrete
  108. Givkashi Mohammad, Tohidloo Mohammad (2024-07)
    The Effect of Freeze-Thaw-Cycles and Sulfuric-Acid-Attack Separately on the Compressive Strength and Microstructure of 3D Printed Air-Entrained Concrete
  109. Malik Umair, Riaz Raja, Rehman Saif, Usman Muhammad et al. (2024-07)
    Advancing Mix-Design Prediction in 3D Printed Concrete:
    Predicting Anisotropic Compressive Strength and Slump-Flow
  110. Kloft Harald, Salamatian Ali, Gosslar Joschua, Dorresteijn Evelien et al. (2024-07)
    Robotic Rammed Earth-Concrete (RREC):
    A Novel Additive Manufacturing Technology to Strengthen Rammed Earth Structures by Integrated Rammed Concrete Parts
  111. Dorresteijn Evelien, Tsiotou Sofia, Lowke Dirk (2024-07)
    Keeping the Processability of a Clay Mortar for Extrusion 3D Printing While Decreasing Shrinkage and Increasing the Green Strength
  112. Lee Yoon, Lee Sang, Kim Jae, Jeong Hoseong et al. (2024-07)
    Inter-Layer Bond Strength of 3D Printed Concrete Members with Ultra-High-Performance Concrete Mix
  113. He Lewei, Chen Bingzhi, Liu Qimin, Chen Hao et al. (2024-07)
    A Quasi-Exponential Distribution of Interfacial Voids and Its Effect on the Inter-Layer Strength of 3D Printed Concrete
  114. Duan Jiaqi, Sun Shouzheng, Chi Shengfeng, Hu Chunyou et al. (2024-06)
    Effect of Process Parameters on Forming Quality and Flexural Strength of Continuous-Fiber-Reinforced Cement-Based 3D Printed Composites
  115. To Quoc, Pham Koa, Lee Gayoon, Shin Myoungsu et al. (2024-06)
    Experimental and FEM Evaluation of the Influence of Inter-Layer Bonding Strength in 3D Printed Concrete Members Under Compressive and Flexural Loadings
  116. Wang Changqing, Du Zicheng, Zhang Yu, Ma Zhiming (2024-06)
    Elaborating the 3D Microstructural Characteristics and Strength Softening Mechanical Mechanism of Fiber-Reinforced Recycled Aggregate Concrete
  117. Basha Shaik, Nugraha Joshua, Rehman Atta, Choi Kichang et al. (2024-06)
    Structuration and Yield Strength Characterization of Hybrid Alkali-Activated Cement Composites for Ultra-Rapid 3D Construction Printing
  118. Yan Yufei, Zhang Mo, Ma Guowei, Sanjayan Jay (2024-05)
    Enhancing Inter-Layer Bonding Strength of 3D Printed Ternary Geopolymer Using Calcium-Carbonate-Whiskers Spray
  119. Thajeel Marwah, Sólyom Sándor, Balázs György (2024-05)
    Impact of Printing-Directions and Printing-Paths on the Compressive Strength of 3D Printed Concrete
  120. Salari Farid, Zocca Andrea, Bosetti Paolo, Hlaváček Petr et al. (2024-05)
    Powder-Bed 3D Printing by Selective Activation of Magnesium-Phosphate-Cement:
    Determining Significant Processing Parameters and Their Effect on Mechanical Strength
  121. Raval Amitkumar, Patel C. (2024-05)
    The Influence of Accelerators on Compressive Strength and Setting-Time of Cement to Achieve High Early Strength for 3D Concrete Printing Technology
  122. Yuan Yong, Wang Xiaoyun, Zhang Jiao-Long, Tao Yaxin et al. (2024-05)
    The Shear Strength of the Interface Between Artificial Rock and Printed Concrete at Super Early-Ages
  123. Sun Bochao, Dominicus Randy, Dong Enlai, Li Peichen et al. (2024-04)
    Predicting the Strength Development of 3D Printed Concrete Considering the Synergistic Effect of Curing-Temperature and Humidity:
    From Perspective of Modified Maturity-Model
  124. Uddin Md, Ye Junhong, Haque M., Yu Kequan et al. (2024-04)
    A Novel Compressive Strength Estimation Approach for 3D Printed Fiber-Reinforced Concrete:
    Integrating Machine Learning and Gene Expression Programming
  125. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo, Castano-Alvarez Ruben (2024-03)
    Effects of 3D Printing on the Tensile Splitting Strength of Concrete Structures
  126. Jia Zijian, Zhou Mengting, Chen Yu, Wang Wei et al. (2024-03)
    Effect of Steel-Fiber Shape and Content on Printability, Microstructure and Mechanical Properties of 3D Printable High-Strength Cementitious Materials
  127. Zhang Hongping, Duan Shuni, Han Qi, He Qiangqiang et al. (2024-03)
    Strength and Proportioning Design of 3D Printed Concrete (3DPC) Based on Aggregate-Gradation-Optimization
  128. Banijamali Kasra, Vosoughi Payam, Arce Gabriel, Noorvand Hassan et al. (2024-03)
    Early-Age Strength Monitoring of Sensor-Embedded 3D Printed Structures
  129. Gou Hongxiang, Sofi Massoud, Zhang Zipeng, Zhu Mintao et al. (2024-03)
    Combined Printable and Mechanical Analysis of 3D Printed Green High-Strength, Lightweight Engineered Cementitious Composites
  130. Lai Xin, Gong Chen, He Enpei, Li Yinmian et al. (2024-02)
    Deep Learning for Predicting the Strength of 3D Printable Engineered Cementitious Composites
  131. Wu Dinglue, Luo Qiling, Long Wujian, Zhang Shunxian et al. (2024-02)
    Advancing Construction 3D Printing with Predictive Inter-Layer Bonding Strength:
    A Stacking Model Paradigm
  132. Colyn Markus, Zijl Gideon, Babafemi Adewumi (2024-02)
    Fresh and Strength Properties of 3D Printable Concrete Mixtures Utilising a High Volume of Sustainable Alternative Binders
  133. Jiang Xiongzhi, Li Yujia, Yang Zhe, Li Yangbo et al. (2024-02)
    Harnessing Path-Optimization to Enhance the Strength of Three-Dimensional Printed Concrete
  134. Mengistu Girum, Nemes Rita (2024-01)
    Recycling 3D Printed Concrete Waste for Normal Strength Concrete Production
  135. Xiao Jianzhuang, Bai Meiyan, Wu Yuching, Duan Zhenhua et al. (2024-01)
    Inter-Layer Bonding Strength and Pore Characteristics of 3D Printed Engineered Cementitious Composites
  136. Alyami Mana, Khan Majid, Javed Muhammad, Ali Mujahid et al. (2023-12)
    Application of Metaheuristic Optimization Algorithms in Predicting the Compressive Strength of 3D Printed Fiber-Reinforced Concrete
  137. Alyami Mana, Khan Majid, Fawad Muhammad, Nawahz R. et al. (2023-11)
    Predictive Modeling for Compressive Strength of 3D Printed Fiber-Reinforced Concrete Using Machine Learning Algorithms
  138. Zavaleta Diana, Ñañez Robert, Silva Guido, Ruiz Gaby et al. (2023-11)
    Additive Construction Using Enhanced Earthen-Based Composites:
    Improvement of the Mechanical Strength and Water Durability Using Chitosan and Agave-Fibers
  139. Põldaru Mattias, Tammkõrv Karl, Tusik Tanel, Kiviste Mihkel et al. (2023-11)
    The Effect of Printing-Direction on the Strength Characteristics of a 3D Printed Concrete Wall-Section
  140. Lyu Qifeng, Dai Pengfei, Chen Anguo (2023-10)
    Mechanical Strengths and Optical Properties of Translucent Concrete Manufactured by Mortar-Extrusion 3D Printing with Polymethyl-Methacrylate Fibers
  141. Şahin Hatice, Mardani Ali (2023-10)
    How Does Rheological Behavior Affect the Inter-Layer Bonding Strength of 3DPC Mixtures?
  142. Lyu Qifeng, Dai Pengfei, Zong Meirong, Zhu Pinghua et al. (2023-10)
    Plant-Germination Ability and Mechanical Strength of 3D Printed Vegetation Concrete Bound with Cement and Soil
  143. Lv Zhenyuan, Xiao Jianzhuang, Duan Zhenhua, Tang Yuxiang (2023-09)
    Time-Dependent Evolution and Strength Modulation of 3D Printed Concrete Pore-Structure Based on Microbial Remediation
  144. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2023-09)
    Rapid Early-Age Strength Development of In-Line Activated Geopolymer for Concrete 3D Printing
  145. Khademi Pooria, Toufigh Vahab (2023-09)
    Data-Driven-Based Ultrasonics-Analysis for Evaluating the Bond-Strength of Concrete-Layers
  146. Hu Hailong, Huang Jian, Wang Tiezhu, Manuka Mesfin et al. (2023-09)
    Impact of Calcium Sulfoaluminate Cement on Printability and Early Strength Development of a Slag-Based 3D Printing Cementitious Material
  147. Liu Junli, Tran Jonathan, Ginigaddara Thusitha, Mendis Priyan (2023-06)
    Exploration of Using Graphene Oxide for Strength Enhancement of 3D Printed Cementitious Mortar
  148. Najvani Mohammad, Murcia Daniel, Soliman Eslam, Taha Mahmoud (2023-06)
    Early-Age Strength and Failure Characteristics of 3D Printable Polymer Concrete
  149. Shenawa Amaal, Karoti Poonam (2023-06)
    3D Printing in Construction, Mixture Characteristics, Strength, and Thermal Performance-Review
  150. Neef Tobias, Kalthoff Matthias, Müller Steffen, Backes Jana et al. (2023-06)
    Extrusion of High Yield Strength Carbon-Reinforced Concrete with Mineral Impregnated Rovings
  151. Ali Ammar, Riaz Raja, Malik Umair, Abbas Syed et al. (2023-06)
    Machine-Learning-Based Predictive-Model for Tensile and Flexural Strength of 3D Printed Concrete
  152. Rahmat N., Ali Noorwirdawati, Abdullah Siti, Abdul Hamid Noor et al. (2023-06)
    Fresh Properties and Flexural Strength of 3D Printing Sustainable Concrete Containing GGBS as Partial Cement Replacement
  153. Uddin Md, Ye Junhong, Deng Boyu, Li Lingzhi et al. (2023-04)
    Interpretable Machine Learning for Predicting the Strength of 3D Printed Fiber-Reinforced Concrete
  154. Paul Suvash, Basit Md, Hasan Noor, Dey Dhrutiman et al. (2023-04)
    3D Printing of Geopolymer Mortar:
    Overview of the Effect of Mix-Design and Printing Parameters on the Strength
  155. Ma Guowei, Huang Chen, Zhang Junfei (2023-04)
    Inner Damage-Identification and Residual Strength-Assessment of a 3D Printed Tunnel with Marble-Like Cementitious Materials Using Piezoelectric Transducers
  156. Allameh Seyed, Miller Roger (2023-02)
    Evaluating the Structural Strength of Layered Concrete Reinforced with 3D-Welded Rebar
  157. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Das Utpal et al. (2023-02)
    Optimization of Mix Proportion of 3D Printable Mortar Based on Rheological Properties and Material-Strength Using Factorial Design of Experiment
  158. Kloft Harald, Schmitz Linus, Müller Christoph, Laghi Vittoria et al. (2023-01)
    Experimental Application of Robotic Wire and Arc Additive Manufacturing-Technique for Strengthening the I-Beam Profiles
  159. Zhao Kang, Hu Zhongjun, Wang Boxin, Li Quanheng et al. (2023-01)
    Effect of Roughness and Adhesive on the Strength of Concrete-to-Concrete Interfaces Cast from 3D Printed Prefabricated Plastic Formworks
  160. Srinivas Dodda, Dey Dhrutiman, Panda Biranchi, Sitharam Thallak (2022-12)
    Printability, Thermal and Compressive Strength Properties of Cementitious Materials:
    A Comparative Study with Silica-Fume and Limestone
  161. Che Yujun, Yang Huashan (2022-10)
    Hydration Products, Pore-Structure, and Compressive Strength of Extrusion-Based 3D Printed Cement-Pastes Containing Nano-Calcium-Carbonate
  162. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2022-09)
    3D Printing Effect on the Compressive Strength of Concrete Structures
  163. Cicione Antonio, Kruger Jacques, Mostert Jean-Pierre, Walls Richard et al. (2022-09)
    The Effect of Wind on 3D Printed Concrete Inter-Layer Bond Strength Based on Machine Learning Algorithms
  164. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2022-09)
    Rheological and Strength-Characterisation of Limestone-Calcined-Clay-Cement 3D Printed Concrete
  165. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2022-09)
    Fresh Properties and Strength Evolution of Slag-Modified Fiber-Reinforced Metakaolin-Based Geopolymer Composite for 3D Concrete Printing Application
  166. Licciardello Lucia, Reggia Adriano, Metelli Giovanni, Plizzari Giovanni (2022-09)
    Investigation of the Inter-Layer Strength of 3D Printed Concrete Shear Walls
  167. He Lewei, Li Hua, Chow Wai, Zeng Biqing et al. (2022-09)
    Increasing the Inter-Layer Strength of 3D Printed Concrete with Tooth-Like Interface:
    An Experimental and Theoretical Investigation
  168. Zhang Hongping, Liu Yaling, Cheng Zhi, Zhao Zhiyi (2022-07)
    Effect of Layering Molding Process on Strength of 3D Printed Composite Cement-Based Materials
  169. Farahbakhsh Mehdi, Rybkowski Zofia, Zakira Umme, Kalantar Negar et al. (2022-07)
    Impact of Robotic 3D Printing Process Parameters on Inter-Layer Bond Strength
  170. Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping (2022-07)
    How Do the Contact Surface Forces Affect the Inter-Layer Bond Strength of 3D Printed Mortar?
  171. Moelich Gerrit, Rensburg Johannes, Kruger Jacques, Combrinck Riaan (2022-06)
    The Environment’s Effect on the Inter-Layer Bond Strength of 3D Printed Concrete
  172. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2022-06)
    Evaluation of the Bond Strength Between 3D Printed and Self-Compacting Concrete
  173. Mostert Jean-Pierre, Kruger Jacques (2022-06)
    Interlocking 3D Printed Concrete Filaments Through Surface Topology Modifications for Improved Tensile Bond Strength
  174. Jin Yuan, Xu Jiabin, Li Yali, Zhao Zhihui et al. (2022-06)
    Rheological Properties, Shape Stability and Compressive Strength of 3D Printed Colored Cement Composites Modified by Needle-Like Pigment
  175. Hager Izabela, Maroszek Marcin, Mróz Katarzyna, Kęsek Rafał et al. (2022-06)
    Inter-Layer Bond Strength Testing in 3D Printed Mineral Materials for Construction Applications
  176. Cao Xiangpeng, Yu Shiheng, Zheng Dapeng, Cui Hongzhi (2022-06)
    Nail-Planting to Enhance the Interface Bonding Strength in 3D Printed Concrete
  177. Danish Aamar, Khurshid Kiran, Mosaberpanah Mohammad, Ozbakkaloglu Togay et al. (2022-06)
    Micro-Structural Characterization, Driving Mechanisms, and Improvement-Strategies for Inter-Layer Bond Strength of Additive Manufactured Cementitious Composites:
    A Review
  178. Alanazi Nawaf, Kolawole John, Buswell Richard, Susmel Luca (2022-05)
    The Theory of Critical Distances to Assess the Effect of Cracks & Manufacturing-Defects on the Static Strength of 3D Printed Concrete
  179. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2022-05)
    Bonding Strength of Steel-Rebars Perpendicular to the Hardened 3D Printed Concrete-Layers
  180. Xu Zhuoyue, Zhang Dawang, Li Hui, Sun Xuemei et al. (2022-05)
    Effect of FA and GGBFS on Compressive Strength, Rheology, and Printing Properties of Cement-Based 3D Printing Material
  181. Keys Courtney, McCorkhill Noah, Lee Yoon-Si (2022-04)
    Investigation of Martian Concrete:
    Pumpability and Strength for Extraterrestrial 3D Printing
  182. Douba Ala, Badjatya Palash, Kawashima Shiho (2022-03)
    Enhancing Carbonation and Strength of MgO Cement Through 3D Printing
  183. İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Yıldırım Gürkan et al. (2022-03)
    Rheological Properties and Compressive Strength of Construction and Demolition Waste-Based Geopolymer Mortars for 3D Printing
  184. Yang Shutong, Lan Tian, Sun Zhongke, Xu Mingqi et al. (2022-03)
    A Predictive Model to Determine Tensile Strength and Fracture-Toughness of 3D Printed Fiber-Reinforced Concrete Loaded in Different Directions
  185. Ismail Nur, Ibrahim Mustaffa, Abdullah Siti (2022-01)
    Compressive Strength of 3D Printing Bio-Composites Mortar
  186. Castano-Alvarez Ruben, Calderon-Uriszar-Aldaca Iñigo, Marcos Ignacio (2021-12)
    Applicability of Existing Models for the Strength Development of 3D Printed Thixotropic Concretes During Hardening
  187. Verian Kho, Ashcroft Jarron, Ziemlaski Jim, Brodesser Tim et al. (2021-12)
    The Assessment of the Buildability and Inter-Layer Adhesion Strength of 3D Printed Mortar
  188. Rutzen Matthias, Schulz Michael, Moosburger-Will Judith, Lauff Philipp et al. (2021-11)
    3D Printing as an Automated Manufacturing Method for a Carbon-Fiber-Reinforced Cementitious Composite with Outstanding Flexural Strength (105 N/mm²)
  189. Sun Xiaoyan, Zhou Jiawei, Wang Qun, Shi Jiangpeng et al. (2021-11)
    PVA-Fiber-Reinforced High-Strength Cementitious Composite for 3D Printing:
    Mechanical Properties and Durability
  190. Liu Junli, Li Shuai, Gunasekara Chamila, Fox Kate et al. (2021-11)
    3D Printed Concrete with Recycled Glass:
    Effect of Glass Gradation on Flexural Strength and Microstructure
  191. Izadgoshasb Hamed, Kandiri Amirreza, Shakor Pshtiwan, Laghi Vittoria et al. (2021-11)
    Predicting Compressive Strength of 3D Printed Mortar in Structural Members Using Machine Learning
  192. He Lewei, Tan Jolyn, Chow Wai, Li Hua et al. (2021-11)
    Design of Novel Nozzles for Higher Inter-Layer Strength of 3D Printed Cement-Paste
  193. Park Jihun, Bui The, Lee Jungwoo, Joh Changbin et al. (2021-11)
    Inter-Layer Strength of 3D Printed Mortar Reinforced by Postinstalled Reinforcement
  194. Burger Joris, Wangler Timothy, Chiu Yu-Hung, Techathuvanun Chanon et al. (2021-09)
    Material-Informed Formwork Geometry:
    The Effects of Cross-Sectional Variation and Patterns on the Strength of 3D Printed Eggshell Formworks
  195. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2021-09)
    Modelling the Inter-Layer Bond Strength of 3D Printed Concrete with Surface Moisture
  196. Zhang Ping, Lu Xiao-jun (2021-09)
    Study on Bending Strength of Cementitious Composites Based on Fiber-Alignment
  197. Lim Taeheun, Kim Seonghoon, Jo Kanghee, Jo Ilguk et al. (2021-07)
    Early Hydration and Mechanical Strength of Calcite-Ettringite-Seeds-Added Cement-Mixture for 3D Printing
  198. Yang Huashan, Che Yujun, Shi Mengyuan (2021-07)
    Influences of Calcium-Carbonate-Nano-Particles on the Workability and Strength of 3D Printing Cementitious Materials Containing Limestone-Powder
  199. Shen Wenkai, Yuan Qiang, Shi Caijun, Ji Youhong et al. (2021-07)
    Influence of Pumping on the Resistivity Evolution of High-Strength Concrete and Its Relation to the Rheology
  200. Shen Wenkai, Shi Caijun, Khayat Kamal, Yuan Qiang et al. (2021-06)
    Change in Fresh Properties of High-Strength Concrete Due to Pumping
  201. Babafemi Adewumi, Kolawole John, Miah Md, Paul Suvash et al. (2021-06)
    A Concise Review on Inter-Layer Bond Strength in 3D Concrete Printing
  202. Jørgensen Henrik, Douglas Philip, Naboni Roberto (2021-06)
    Experimental Study on the Anisotropic Behavior and Strength of 3D Printed Concrete
  203. Sanjayan Jay, Nematollahi Behzad, Xia Ming, Marchment Taylor (2021-06)
    Effect of Surface Moisture on Inter-Layer Strength of 3D Printed Concrete:
    Correction
  204. Weger Daniel, Gehlen Christoph (2021-01)
    Particle-Bed Binding by Selective Paste-Intrusion:
    Strength and Durability of Printed Fine-Grain Concrete Members
  205. Lesovik Valeriy, Glagolev Evgeniy, Elistratkin Michail, Podgorniy Daniil (2021-01)
    On the Issue of Measuring the Strength of Additively Manufactured Concrete
  206. Weng Yiwei, Li Mingyang, Wong Teck, Tan Ming (2021-01)
    Synchronized Concrete and Bonding-Agent-Deposition-System for Inter-Layer Bond Strength Enhancement in 3D Concrete Printing
  207. Pan Tinghong, Jiang Yaqing, He Hui, Wang Yu et al. (2021-01)
    Effect of Structural Build-Up on Inter-Layer Bond Strength of 3D Printed Cement Mortars
  208. Mohammed Alyaa, Saadi Nihad (2020-12)
    Ultra-High Early Strength Cementitious Grout Suitable for Additive Manufacturing Applications Fabricated by Using Graphene Oxide and Viscosity Modifying Agents
  209. Vespalec Arnošt, Novák Josef, Kohoutková Alena, Vosynek Petr et al. (2020-11)
    Interface Behavior and Interface Tensile Strength of a Hardened Concrete Mixture with a Coarse Aggregate for Additive Manufacturing
  210. Chu Shaohua, Li Leo, Kwan Albert (2020-09)
    Development of Extrudable High-Strength Fiber-Reinforced Concrete Incorporating Nano-Calcium-Carbonate
  211. Yang Huashan, Li Weiwei, Che Yujun (2020-08)
    3D Printing Cementitious Materials Containing Nano-CaCO3:
    Workability, Strength, and Microstructure
  212. Li Zhijian, Wang Li, Ma Guowei, Sanjayan Jay et al. (2020-07)
    Strength and Ductility Enhancement of 3D Printing Structure Reinforced by Embedding Continuous Micro-Cables
  213. Chen Yu, Jansen Koen, Zhang Hongzhi, Rodríguez Claudia et al. (2020-07)
    Effect of Printing-Parameters on Inter-Layer Bond Strength of 3D Printed Limestone-Calcined-Clay-Based Cementitious Materials:
    An Experimental and Numerical Study
  214. Fioretti Marta, Kompella Sriram, Monte Francesco, Esposito Laura et al. (2020-07)
    Experimental Investigation on the Early-Age Tensile Strength of Fiber-Reinforced Mortar Used in 3D Concrete Printing
  215. Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2020-07)
    Use of the Chemical and Mineral Admixtures to Tailor the Rheology and the Green Strength of 3D Printing Cementitious Mixtures
  216. Weger Daniel, Kim Heejeong, Talke Daniel, Henke Klaudius et al. (2020-07)
    Lightweight Concrete 3D Printing by Selective Cement-Activation:
    Investigation of Thermal Conductivity, Strength and Water-Distribution
  217. Ahmed Zeeshan, Biffi Alessia, Hass Lauri, Bos Freek et al. (2020-07)
    3D Concrete Printing:
    Free-Form Geometries with Improved Ductility and Strength
  218. Hameed Rashid, Papon Aurélie, Perrot Arnaud, Rangeard Damien (2020-07)
    Effect of Metallic Fibers on the Print Quality and Strength of 3D Printed Concrete
  219. He Lewei, Chow Wai, Li Hua (2020-06)
    Effects of Inter-Layer Notch and Shear Stress on Inter-Layer Strength of 3D Printed Cement-Paste
  220. Shahzad Qamar, Wang Xujiang, Wang Wenlong, Wan Yi et al. (2020-06)
    Coordinated Adjustment and Optimization of Setting-Time, Flowability, and Mechanical Strength for Construction 3D Printing Material Derived from Solid Waste
  221. Yuan Qiang, Zhou Dajun, Huang Hai, Peng Jianwei et al. (2020-06)
    Structural Build-Up, Hydration and Strength Development of Cement-Based Materials with Accelerators
  222. Kloft Harald, Krauss Hans-Werner, Hack Norman, Herrmann Eric et al. (2020-05)
    Influence of Process Parameters on the Inter-Layer Bond Strength of Concrete Elements Additive Manufactured by Shotcrete 3D Printing
  223. Falliano Devid, Domenico Dario, Ricciardi Giuseppe, Gugliandolo Ernesto (2020-04)
    3D Printable Lightweight Foamed Concrete and Comparison with Classical Foamed Concrete in Terms of Fresh State Properties and Mechanical Strength
  224. Chougan Mehdi, Ghaffar Seyed, Jahanzat Mohammad, Albar Abdulrahman et al. (2020-04)
    The Influence of Nano-Additives in Strengthening Mechanical Performance of 3D Printed Multi-Binder Geopolymer Composites
  225. Özalp Fatih, Yılmaz Halit (2020-03)
    Fresh and Hardened Properties of 3D High-Strength Printing Concrete and Its Recent Applications
  226. Mai (née Dressler) Inka, Freund Niklas, Lowke Dirk (2020-01)
    The Effect of Accelerator Dosage on Fresh Concrete Properties and on Inter-Layer Strength in Shotcrete 3D Printing
  227. Baz Bilal, Aouad Georges, Rémond Sébastien (2020-01)
    Effect of the Printing Method and Mortar’s Workability on Pull-Out Strength of 3D Printed Elements
  228. Shakor Pshtiwan, Nejadi Shami, Paul Gavin (2019-11)
    Investigation into the Effect of Delays Between Printed Layers on the Mechanical Strength of Inkjet 3DP Mortar
  229. Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2019-09)
    Predication of Strength-Based Failure in Extrusion-Based 3D Concrete Printing
  230. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-09)
    Enhancing Strength of Powder-Based 3D Printed Geopolymers for Digital Construction Applications
  231. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-09)
    Post-Processing Techniques to Enhance Strength of Portland Cement Mortar Digitally Fabricated Using Powder-Based 3D Printing Process
  232. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Hermens Lex et al. (2019-09)
    The Influence of Material Temperature on the In-Print Strength and Stability of a 3D Print Mortar
  233. Yeon Kyu-Seok, Kim Kwan, Yeon Jaeheum, Lee Hee (2019-08)
    Compressive and Flexural Strengths of EVA-Modified Mortars for 3D Additive Construction
  234. Lee Hojae, Kim Jang-Ho, Moon Jae-Heum, Kim Won-Woo et al. (2019-08)
    Correlation Between Pore Characteristics and Tensile Bond Strength of Additive Manufactured Mortar Using X-Ray Computed Tomography
  235. Kim Kwan, Yeon Jaeheum, Lee Hee (2019-08)
    Strength Development Characteristics of SBR-Modified Cementitious Mixtures for 3D Concrete Printing
  236. Sakka Fatima, Assaad Joseph, Hamzeh Farook, Nakhoul Charbel (2019-07)
    Thixotropy and Interfacial Bond Strengths of Polymer-Modified Printed Mortars
  237. Putten Jolien, Schutter Geert, Tittelboom Kim (2019-07)
    Surface-Modification as a Technique to Improve Inter-Layer Bonding Strength in 3D Printed Cementitious Materials
  238. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-07)
    Post-processing Methods to Improve Strength of Particle-Bed 3D Printed Geopolymer for Digital Construction Applications
  239. Keita Emmanuel, Bessaies-Bey Hela, Zuo Wenqiang, Belin Patrick et al. (2019-06)
    Weak Bond Strength Between Successive Layers in Extrusion-Based Additive Manufacturing:
    Measurement and Physical Origin
  240. Chen Yu, Li Zhenming, Figueiredo Stefan, Çopuroğlu Oğuzhan et al. (2019-04)
    Limestone and Calcined-Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing:
    A Fundamental Study of Extrudability and Early-Age Strength Development
  241. Marchment Taylor, Sanjayan Jay, Xia Ming (2019-03)
    Method of Enhancing Inter-Layer Bond Strength in Construction-Scale 3D Printing with Mortar by Effective Bond Area Amplification
  242. Marchment Taylor, Sanjayan Jay, Nematollahi Behzad, Xia Ming (2019-02)
    Inter-Layer Strength of 3D Printed Concrete
  243. Panda Biranchi, Unluer Cise, Tan Ming (2018-10)
    Investigation of the Rheology and Strength of Geopolymer Mixtures for Extrusion-Based 3D Printing
  244. Esnault Vivien, Labyad A., Chantin Marjorie, Toussaint Fabrice (2018-09)
    Experience in On-Line Modification of Rheology and Strength Acquisition of 3D Printable Mortars
  245. Falliano Devid, Gugliandolo Ernesto, Domenico Dario, Ricciardi Giuseppe (2018-09)
    Experimental Investigation on the Mechanical Strength and Thermal Conductivity of Extrudable Foamed Concrete and Preliminary Views on Its Potential Application in 3D Printed Multilayer Insulating Panels
  246. Panda Biranchi, Mohamed Nisar, Tay Yi, Tan Ming (2018-09)
    Bond Strength in 3D Printed Geopolymer Mortar
  247. Marchment Taylor, Sanjayan Jay (2018-09)
    Method of Enhancing Inter-Layer Bond Strength in 3D Concrete Printing
  248. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2018-09)
    Compressive Strength and Dimensional Accuracy of Portland Cement Mortar Made Using Powder-Based 3D Printing for Construction Applications
  249. Tay Yi, Ting Guan, Qian Ye, Panda Biranchi et al. (2018-07)
    Time-Gap-Effect on Bond Strength of 3D Printed Concrete
  250. Lao Wenxin, Tay Yi, Quirin Didier, Tan Ming (2018-05)
    The Effect of Nozzle Shapes on the Compactness and Strength of Structure Printed in Additive Manufacturing of Concrete
  251. Tay Yi, Ting Guan, Panda Biranchi, He Lewei et al. (2018-05)
    Bond Strength of 3D Printed Concrete
  252. Panda Biranchi, Mohamed Nisar, Tay Yi, He Lewei et al. (2018-05)
    Effects Of Slag Addition On Bond Strength Of 3D Printed Geopolymer Mortar:
    An Experimental Investigation
  253. Sanjayan Jay, Nematollahi Behzad, Xia Ming, Marchment Taylor (2018-04)
    Effect of Surface Moisture on Inter-Layer Strength of 3D Printed Concrete
  254. Panda Biranchi, Paul Suvash, Mohamed Nisar, Tay Yi et al. (2017-09)
    Measurement of Tensile Bond Strength of 3D Printed Geopolymer Mortar
  255. Zareiyan Babak, Khoshnevis Behrokh (2017-08)
    Effects of Interlocking on Inter-Layer Adhesion and Strength of Structures in 3D Printing of Concrete
  256. Zareiyan Babak, Khoshnevis Behrokh (2017-06)
    Inter-Layer Adhesion and Strength of Structures in Contour Crafting:
    Effects of Aggregate-Size, Extrusion-Rate, and Layer-Thickness
  257. Hambach Manuel, Möller Hendrik, Neumann Thomas, Volkmer Dirk (2016-08)
    Portland-Cement-Paste with Aligned Carbon-Fibers Exhibiting Exceptionally High Flexural Strength (>100 MPa)
  258. Jeong Jae, Jang Kyong, Park Chan, Lee Seung et al. (2016-05)
    Effect of Admixtures on Pumpability for High-Strength Concrete
  259. Voigt Thomas, Malonn Tim, Shah Surendra (2005-10)
    Green and Early-Age Compressive Strength of Extruded Cement Mortar Monitored with Compression Tests and Ultrasonic Techniques