#additive
Keywords by Co - Occurrence
- Valdez-Cano R., González-López J., De-Los-Santos E., Mendoza‐Rangel J. et al. (2026-01)
Alternative Silica Aerogel Mortar for Improving Energy Efficiency, Thermal Comfort, and Environmental Performance in Residential Buildings Under Hot-Dry Climates Using 3D Additive Manufacturing
- Gil-Lopez Tomas, Amirfiroozkoohi Alireza, Valiente López María, Verdu-Vazquez Maria (2026-01)
The Impact of 3D Printing on Mortar Strength and Flexibility:
A Comparative Analysis of Conventional and Additive Manufacturing Techniques
- Lara Yamile, Gianoli Pablo, Gonzalez Elizabeth, Abreu Ana (2026-01)
Evaluation of Additively Manufactured Acoustic Absorbing Metamaterials
- Knychalla Bruno, Wiesner Christian, Sonnleitner Patrick, Kowalczyk Magdalena et al. (2025-12)
Integrated Fiber Forms:
Functionally Integrated Slab Systems Through Additive Manufacturing and Natural Fiber Reinforcement
- Feng Xiaowei, Carvelli Valter, Pan Dongjiang, Zhu Chuankai et al. (2025-12)
Additive Manufacturing of Hybrid Straw-Soil-Cement Materials for Enhanced Mine Models
- Alnaggar Mohammed (2025-12)
Large Format Additive Manufacturing with Cementitious and Geo Materials:
General Considerations, Drivers, and Context
- Teixeira João, Jesus Manuel, Ribeiro Elis, Rangel Bárbara et al. (2025-12)
Large Format Additive Manufacturing with Cement and Clay Applications
- Guerrero Ana, Asensio Eloy, Fernández Fernando (2025-12)
Large‐Format Additive Manufacturing with Cement and Clays:
Characterization Methods
- Ramezani Mahyar, Kilic Ugur, Sherif Muhammad, Arce Gabriel et al. (2025-12)
Rheological Properties and Mechanical Response of Bio-Based Graphene Enhanced Additively Manufactured Cementitious Composites
- Li Chenglin, Jiao Y., Ren Kai, Liu N. et al. (2025-11)
A Novel Pivot-Move Strategy for Dual-Robot Manipulator Additive Manufacturing:
Enabling Collision Avoidance Without Halting Deposition
- Korol Ewelina, Jenta Arkadiusz, Chaudhari Ojas, Wójcik Michal (2025-11)
Experimental Investigation of Concrete Beams Under Bending, Manufactured with 3D Additive Printing Technology
- Xia Chen, Lee Chang, Leifer Max, Zheng Bujingda (2025-11)
Additive Reinforced Concrete for Multifunctional Construction Component
- Benz Hendrik, Nguyen Trong The, Klemt-Albert Katharina (2025-11)
Real-Time Vision-Based Defect Detection for Large-Scale on-Site Earthen Additive Manufacturing:
Annotated Dataset and Dual-Model Framework
- Abidi Imene, Tuna Meral, Carboni Biagio, Trovalusci Patrizia (2025-11)
A Parametric Study on Topology Optimization of Additively Manufactured Clay Materials
- Changez Kashif, Aslam Jawad, Bhutta Muhammad, Butt Shahid (2025-11)
Hybrid Additive Strategies for Sustainable 3D Concrete Printing:
Balancing Printability, Early-Stage Strength, and Eco-Efficiency
- Sahu Akshay, Panda Biranchi (2025-11)
An Additive Manufacturing-Oriented Design Approach for Digital Construction
- Faleschini Flora, Trento Daniel, Zanini Mariano (2025-11)
Earth as a Building Material:
From Traditional Building Techniques to Additive Manufacturing
- Müller Niklas, Claßen Martin (2025-10)
Additive Manufacturing of Topology-Optimized Lightweight Slabs Using Foam Concrete
- Verma Shilpi, Parghi Anant (2025-10)
Machine Learning-Based Prediction of Compressive Strength in Additive Manufacturing of Concrete Technology
- Ball Richard, Dams Barrie, Shepherd Paul, Chen Binling (2025-10)
Exploring Aerial Additive Manufacturing with Cementitious Materials Using Autonomous Drones
- Marrero-Rosa Raul, Gomaa Shady, Irizarry Elmer, Ahmed Hassan et al. (2025-10)
Additive Manufacturing of Ultra-High-Performance Concrete:
From Mechanical Characterization to Large-Scale Application
- Biernacki Joseph (2025-10)
Sustainability of Additively Manufactured Cement-Based Housing:
What's Our Next Move?
- Wei Jingjie, Khayat Kamal (2025-10)
Effect of Chemical Additives on Performance of Low-Clinker 3D Printing Mortar
- Lale Erol, Ayhan Bahar, Ahmed Ayesha, Irizarry Elmer et al. (2025-10)
Computational Simulations Fresh-to-Solid Transition for Additive Manufacturing of Ultra-High-Performance Fiber Reinforced Concrete
- Shekhar Shashank, Kumar Manish, Mathur Rishabh (2025-10)
Additive Manufacturing of Concrete with Low Initial Yield Strength Through Controlled Heating of Printed Layers
- Gonsalves Nicolas, Morgan Ashlei, Thiele Heidi, Olarra Andre et al. (2025-10)
3D Printing of Sustainable Infrastructure Using Rapid-Set Clay Concrete with Biobased Additives
- Fahim Abdullah, Bukhari Syed, Khanzadeh Moradllo Mehdi (2025-09)
Additive Manufacturing of Carbonatable Ternary Cementitious Systems with Cellulose Nanocrystals
- Tarhan Yeşim, Atalay Berrin (2025-09)
Phosphogypsum and Borogypsum as Additives for Sustainable and High-Performance 3D-Printable Concrete
- Lopes de Aquino Brasil Alexander, Carmo Pena (2025-09)
A Systematic Review of Robotic Additive Manufacturing Applications in Architecture, Engineering, and Construction
- Yousaf Arslan, Rashid Ans, Koç Muammer (2025-09)
Additive Manufacturing for Vernacular Architecture Using Local Earthen Soil and Bio-Waste Materials
- Ramirez Rodriguez Fatima, Ahmad Rafiq (2025-09)
Sustainable Technology Advances for Additive Construction:
A State-of-the-Art Review
- Keller Petr, Mendřický Radomír (2025-09)
Analysis of Object Deformations Printed by Additive Manufacturing from Concrete Mixtures over Time
- Sahu Akshay, Sharma Deepak, Panda Biranchi (2025-09)
Tailoring Topology-Optimized Lightweight Concrete Beam Design for Additive Manufacturing
- Rabiei Mahsa, Moini Mohamadreza (2025-09)
Extrusion Under Material Uncertainty with Pressure-Based Closed-Loop Feedback Control in Robotic Concrete Additive Manufacturing
- Ghodke Swapnil, Singh Arshdeep, Singh Bhupinder, Chowdhury Shubhankar (2025-08)
Additively Manufactured Smart Materials and Structures in Construction and Building Applications
- Lin Xing-Tao, Xu Shuhao, Chen Xiangsheng (2025-08)
Optimization of Building Structures Based on Additive Manufacturing:
A Review
- Henao-Rios Laura, Orobio Armando, Campaña Wilmer (2025-08)
BIM Integration in Prefabricated Additive Construction Projects:
Case Study
- Wagner Gabriel, Silva João, Ribeiro João, Figueiredo Bruno et al. (2025-08)
A Novel and Flexible Approach to Modeling the Additive Manufacturing Extrusion of Cementitious Materials
- Cai Yilin, Hartell Julie, Aryal Ashrant (2025-07)
Real-Time Multimodal Sensing System for Additive Construction by Extrusion:
Integrating Thermal, Depth and RGB Data
- Banda-Pérez Pablo, Georgiou Ioulios, Carrasco Pérez Patricio, Soria Romanella et al. (2025-07)
Deployment for Additive Construction Through Digital Platforms:
Gananoque Project as a Case Study
- Chovghi Frederic, Richter Christiane, D'Acunto Pierluigi (2025-07)
Fabrication-Aware Structural Form-Finding for Additive Manufacturing:
An Equilibrium-Based Approach
- Zhang Chao, Ren Juanjuan, Zhang Shihao, Guo Yipu et al. (2025-07)
Advanced Impact Resistance Design Through 3D-Printed Concrete Technology:
Unleashing the Potential of Additive Manufacturing for Protective Structures
- Pemas Sotirios, Baliakas Dimitrios, Pechlivani Eleftheria, Stefanidou Maria (2025-07)
Mechanical Properties of Bio-Printed Mortars with Bio-Additives for Green and Sustainable Construction
- Balina Karina, Gailitis Rihards, Šinka Māris, Argalis Pauls et al. (2025-07)
Prospective LCA for 3D-Printed Foamed Geopolymer Composites Using Construction Waste as Additives
- Anop Darya, Sadenova Marzhan, Beisekenov Nail, Rudenko Olga et al. (2025-07)
Additive Manufacturing as an Alternative to Core Sampling in Concrete Strength Assessment
- Wang Tongcai, Gu Guangshuai, Zhang Rihan, Cui Qianshun et al. (2025-07)
Additive Manufacturing of Lunar Regolith via Resin-Based Binder and Material Extrusion Method for High-Performance In-Situ Manufacturing on the Moon
- Flor-Unda Omar, Toapanta Carlos, Fuentes Mauricio, Rivera Mario (2025-07)
Additive Manufacturing Technologies:
Advances for the Construction Industry
- Gasmi Abrar, Guessasma Mohamed, Davidovits Ralph, Pélegris Christine (2025-06)
Unveiling Additive Effects in 3D Printed Geopolymer Composites:
A Multi-Scale Analysis Coupling Rheological Insights and CFD-Optimized Deposition
- Versteege Jelle, Wolfs Robert, Salet Theo (2025-06)
Data-Driven Additive Manufacturing with Concrete - Enhancing In-Line Sensory Data with Domain Knowledge:
Part II: Moisture and Heat
- Keune Anna, Simšič Živa, Kloft Harald, Dörfler Kathrin (2025-06)
AMC Edu:
Lab Design to Learn About Additive Manufacturing in Construction
- Ribeiro João, Campos Tatiana, Brandão Filipe, Figueiredo Bruno et al. (2025-06)
3DCP Composite Systems:
Additive Manufacturing of a Concrete and Cellulose Interlocking Wall
- Garcés Gonzalo, García-Alvarado Rodrigo, Bunster Victor, Muñoz-Sanguinetti Claudia (2025-06)
Additive Construction 4.0:
A Systematic Review of 3D Concrete Printing for Construction 4.0
- Makul Natt (2025-06)
Additive Manufacturing
- Álvarez-Fernández Martina, Guerrero-Miguel Diego-José, González-Nicieza Celestino, Prendes-Gero María et al. (2025-06)
Mortars with Mining Tailings Aggregates:
Implications for Additive Manufacturing
- Aly Ahmed Aly, Mantawy Islam (2025-05)
Additive Construction of Low Embodied Carbon Concrete:
Geopolymer Concrete
- Bettermann Luca, Slepicka Martin, Esser Sebastian, Borrmann André (2025-05)
Data-Driven Parameter Calibration in Additive Manufacturing for Construction:
An Introduction to Learning by Printing
- Safal K., Liu Han, Lopes Sousa Israel, Laflamme Simon et al. (2025-05)
Investigation of 3D Printed Concrete for Real-Time Monitoring of Additive Manufacturing Process
- Casanova Euro, Hidalgo Nelson, Valdebenito Michael, Forcael Eric et al. (2025-04)
Overturning Resistance of Concrete Curved Walls Manufactured with Additive Construction
- Hasani Alireza, Besharatian Boshra, Dorafshan Sattar (2025-04)
Additively Constructed Plain Concrete Pipes:
Structural Performance and Site Implementation
- Li Mo, Wu Yun-Chen, Wang Xinbo (2025-04)
Fracture Behavior of Additively Manufactured Cementitious Materials
- Thomsen Mette, Nicholas Paul, Chiujdea Ruxandra-Stefania, Nielsen Stine et al. (2025-04)
Additive Manufacturing for Repair:
Continual Construction Through Bio-Based Materials
- Oladunni Oluwole, Lee Carman, Ibrahim Idowu, Olanrewaju Oludolapo (2025-03)
Advances in Sustainable Additive Manufacturing:
A Systematic Review for Construction Industry to Mitigate Greenhouse Gas Emissions
- Koszela Kamila, Chajec Adrian (2025-03)
Sustainable Additive Manufacturing:
How the Composition of the Cementitious Mix Influences Its Fresh Properties
- Chai Hwa, Shiotani Tomoki (2025-03)
Opening Letter of RILEM TC QPA:
Quality and Performance Assurance of Additively Manufactured Cementitious Composites by Advanced Non-Invasive Techniques
- Meyuhas Ohad, Larianovsky Pavel, Bentur Arnon, Magdassi Shlomo et al. (2025-03)
Methods for Earth-Based Falsework in Multi-Material Additive Manufacturing at an Architectural Scale
- Li Hualong, Shi Ye, Rong Hui, Dai Kaichao (2025-03)
Effect of Additives on the Performance of 3D-Printing Ultra-High Performance Concrete
- Zafar Muhammad, Shahid Adnan, Sedghi Reza, Hojati Maryam (2025-03)
Optimization of Biopolymer Additives for 3D Printable Cementitious Systems:
A Design of Experiment Approach
- Gardan Julien, Hedjazi Lofti, Attajer Ali (2025-02)
Additive Manufacturing in Construction:
State of the Art and Emerging Trends in Civil Engineering
- Chadha Kunaljit, Vasey Lauren, Gramazio Fabio, Kohler Matthias (2025-02)
Adaptive Robotic Tamping:
A Novel Robotic Method for Formative Surface Finishing in Earth-Based Additive Manufacturing
- Versteege Jelle, Wolfs Robert, Salet Theo (2025-02)
Data-Driven Additive Manufacturing with Concrete - Enhancing In-Line Sensory Data with Domain Knowledge:
Part I: Geometry
- Tarek Shaimaa, Mansour Yasser, Abdelmohsen Sherif, Kohail Mohamed et al. (2025-02)
Evaluating the Role of Additive Manufacturing in Adobe Brick Enhancement:
A Comparative Study
- Degen Robin, Dichtl Matthias (2025-02)
Praxiseinblick in den 3D-Druck im Betonbau:
Additives Bauen und CO2-Bilanzierung im Fokus
- Khan Shoukat, Koç Muammer (2025-01)
Advancements in Additively Manufactured Safety Materials:
Energy-Efficient 3D Printing Solutions for Critical Infrastructure
- Pfleger Marc-Patrick, Sam Nina, Radl Elisabeth, Vill Markus (2025-01)
Assessment of the Suitability of Carbon Long Fibers as Reinforcement for Additively Manufactured Components
- Richter Christiane, Maurer Christian, Jungwirth Jörg (2025-01)
Reinforcement-Strategies for Additively Manufactured Concrete Elements:
Exploring the Potential of Different Reinforcement-Materials for Selective Cement-Activation
- Roschli Alex, Post Brian, Wang Peter, Chesser Phillip et al. (2025-01)
The Cost of Scaling-Up in Large-Format Additive Manufacturing
- Li Chao, Petzold Frank (2025-01)
Ontology-Driven Mixture-of-Domain Documentation:
A Backbone Approach Enabling Question Answering for Additive Construction
- Khan Mirza, Ahmed Aayzaz, Ali Tariq, Qureshi Muhammad et al. (2024-12)
Comprehensive Review of 3D Printed Concrete, Life Cycle Assessment, AI and ML Models:
Materials, Engineered Properties and Techniques for Additive Manufacturing
- Forcael Eric, Medina Moisés, Opazo-Vega Alexander, Moreno Francisco et al. (2024-11)
Additive Manufacturing in the Construction Industry
- Wang Lingyu, Zhang Yu, Wang Zhiyong, Chen Juan et al. (2024-11)
Additive Manufacturing in Construction Using Unmanned Aerial Vehicle:
Design, Implementation, and Material-Properties
- Vasey Lauren, Chadha Kunaljit, Kango Ananya, Leung Victor et al. (2024-11)
Impact Printing:
A Novel Robotic Additive Manufacturing Method for Circular, High-Volume Construction
- Hack Norman, Dörrie Robin, Kloft Harald (2024-11)
Hybrid Additive Manufacturing
- Dams Barrie, Chen Binling, Kaya Yusuf, Shepherd Paul et al. (2024-11)
The Rise of Aerial Additive Manufacturing in Construction:
A Review of Material Advancements
- Iuorio Ornella (2024-11)
Additive Manufacturing and Automation in Construction
- He Chenming, Michalatos Panagiotis, Sabin Jenny (2024-11)
GrowFill:
Generative Adaptive Infill for Additive Manufacturing
- Teng Teng, Zhi Yefan, Akbarzadeh Masoud (2024-11)
Gradient Multimaterial Printing:
Integrated and Tailored Thermal Insulation Through Gradient Multimaterial Additive Manufacturing for Masonry Architectural Components
- Rymeš Jiří, Červenka Jan, Jendele Libor, Bureš Vladislav et al. (2024-11)
Integrating 3D Modelling and Non-Linear Numerical Simulations in Concrete Additive Manufacturing
- Wang Li, Lin Wenyu, Wan Qian, Li Zhijian et al. (2024-11)
Manufacturing Accuracy Improvement of Concrete Product by Hybrid Additive-Subtractive Method Based on the Time-Dependent Characteristics of Cementitious Materials
- Lucas Sandra (2024-11)
From 3D to 5D Printing:
Additive Manufacturing of Functional Construction Materials
- Curth Alexander, Alvarez Eduardo, Sass Lawrence, Norford Leslie et al. (2024-11)
Additive Energy:
3D Printing Thermally Performative Building Elements with Low-Carbon Earthen Materials
- Thomsen Mette, Tamke Martin, Rossi Gabriella, Chiujdea Ruxandra-Stefania et al. (2024-11)
Sustainable Construction:
Additive Manufacturing in a Circular Design Framework
- He Yuxiang, Robens-Radermacher Annika, Noda Sakiko, Wolf Christoph et al. (2024-11)
Automated Workflows for Concrete Additive Manufacturing for Design, Optimization, and Fabrication of Parametrized Elements
- Wan Linxiaoyi, Liu Jingyang, Bard Joshua, Cupkova Dana (2024-11)
Towards Adaptive Additive Manufacturing:
Image-Based Monitoring for Binder Jet 3D Printing of Coarse Composite Concrete Powders
- Lachmayer Lukas, Recker Tobias, Ekanayaka Virama, Hürkamp André et al. (2024-10)
Multi-Model-Based Additive Manufacturing:
A Framework for Automated Large-Scale 3D Concrete Printing with Industrial Robots
- Mackin Anthony, Hanoun Zaid, Migliorino Jenna, Ahmed Aly et al. (2024-10)
Multi-Functional Additively Constructed Honeycomb Walls for Housing and Sheltering
- Händle Frank (2024-10)
Additive Manufacturing by Extrusion in Ceramics
- Wagner Juliana, Silveira Marcos, Vanderlei Romel, Das Sreekanta (2024-10)
Comparative Analysis of Mold-Cast and 3D Printed Cement-Based Components:
Implications for Standardization in Additive Construction
- Lim Sean, Tan Ming (2024-10)
A Rheological Model for Concrete Additive Manufacturing
- Rudolph Enrico, Schönfelder Daniel, Funke Henrik, Gelbrich Sandra (2024-10)
Efficient Production of Pre-Cast Concrete Staircases Using Additive-Manufactured, Component-Integrated Formworks Systems
- Wysoczanski Andrzej (2024-10)
The Use of Additively Manufactured Concrete Objects
- Seo Eun-A, Lee Hojae (2024-10)
Influence of Chemical Admixtures on Buildability and Deformation of Concrete for Additive Manufacturing
- Florenzano Daniele, Sumini Valentina, Naboni Roberto (2024-10)
Automated Design and Additive Construction of Regolith-Shielded Lunar Habitats
- Jin Peng, Hasany Masoud, Kohestanian Mohammad, Mehrali Mehdi (2024-10)
Micro/Nano Additives in 3D Printing Concrete:
Opportunities, Challenges, and Potential Outlook in Construction Applications
- Raza Muhammad, Zhong Ray (2024-10)
Integration of Additive Manufacturing, Lean and Green Construction:
A Conceptual Framework
- Martin Michael, Banijamali Kasra, Gilbert Hunter, Mascarenas David et al. (2024-09)
LiDAR-Based Real-Time Geometrical Inspection for Large-Scale Additive Manufacturing
- Slepicka Martin, Borrmann André (2024-09)
Fabrication Information Modeling for Closed-Loop Design and Quality Improvement in Additive Manufacturing for Construction
- Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2024-09)
Additive Flow Production of Lightweight Precision Concrete Elements
- Dounas Theodoros, Berdos Yorgos, Vele Jiří (2024-09)
Towards a Decentralized Physical Infrastructure for Additive Manufacturing in Architecture:
A Proof of Concept for a Tamper Proof, Secure Connection Between Designs, Blockchains and 3D Printers
- Nan Cristina (2024-09)
The Computational Clay Column:
Computational Ceramic Systems with Additive Manufacturing
- Meyuhas Ohad, Larianovsky Pavel, Natanian Jonathan, Sprecher Aaron (2024-09)
Thermal and Structural Performance of Cork-Cement Composite for Additive Manufacturing
- Walzer Alexander, Kozlova Mariia, Yeomans Julian (2024-09)
Printing Homes:
Unit Cost Estimation for Additive Manufacturing in Construction
- Straßer Alexander, Haynack Alexander, Kränkel Thomas, Gehlen Christoph (2024-09)
Additive Manufacturing by the Selective Paste-Intrusion:
Effect of the Distance of the Print Nozzle to the Particle-Bed on the Print Quality
- Romani Alessia, Levi Marinella (2024-09)
Large-Format Material-Extrusion Additive Manufacturing for Circular Economy Practices:
A Focus on Product-Applications with Materials from Recycled Plastics and Biomass-Waste
- Reißig Silvia, Herdan Annika, Mechtcherine Viktor (2024-09)
Rheological Behavior of Steel-Fiber-Reinforced Concrete in the Context of Additive Manufacturing
- Hlaváček Petr, Kolsch Nico, Zocca Andrea, Kühne Hans-Carsten et al. (2024-09)
Additive Manufacturing of Alkali-Activated Materials by Laser-Induced Slip Casting
- Vasilić Ksenija (2024-09)
Additive Manufacturing with Concrete:
The Path to Practical Implementation
- Lachmayer Lukas, Quantz Jelle, Heeren Hauke, Recker Tobias et al. (2024-09)
A Spatial Multi-Layer Control-Concept for Strand-Geometry-Control in Robot-Based Additive Manufacturing-Processes
- Johnson Carol, Jordan Joseph, Kreiger Eric, Kreiger Megan (2024-09)
Blast Response of Additively Constructed Concrete
- Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Sanjayan Jay (2024-09)
Active Rheology-Control of Concrete Using Encapsulated Accelerator as Responsive Additives for Concrete 3D Printing
- Daneshvar Dana, Rabiei Mahsa, Gupta Shashank, Najmeddine Aimane et al. (2024-09)
Geometric Fidelity of Interlocking Bodies in Two-Component Robotic Additive Manufacturing
- Colyn Markus, Babafemi Adewumi, Zijl Gideon (2024-09)
Advancements in Sustainability of 3D Concrete Printing:
Presenting Low-Carbon Mixtures for Additively Manufactured Concrete Structures in Practice
- Migliorino Jenna, Ahmed Aly, Mackin Anthony, Hanoun Zaid et al. (2024-09)
Topology-Optimization-Based Additive Construction for Sustainability
- Negron-McFarlane Christian, Kreiger Eric, Kreiger Megan (2024-09)
Determination of Print Speed Based on the Fresh Mechanical Strength over Time of Additively Constructed Concrete by Unconfined Compression
- Rudolph Enrico, Schönfelder Daniel, Funke Henrik, Gelbrich Sandra (2024-09)
Efficient Production of Reinforced Pre-Cast Concrete Elements Using Additive Manufactured, Integrated Formwork
- Mackin Anthony, Migliorino Jenna, Farhoud Hamdy, Mantawy Islam (2024-09)
Is Additive Construction Ready for Seismic Regions?:
A New Seismic Protective System Enabled by Additive Construction
- Saelens Lien, Wan-Wendner Roman, Caspeele Robby, Tittelboom Kim (2024-09)
Material-Volume Reduction with Additive Manufacturing:
Challenges for Structural Application
- Kreiger Eric, Kreiger Megan, MacAllister Bruce, Wood Tanner et al. (2024-09)
The Use of Additive Construction in All Structural Components of a Building
- Rangel Carolina, Salet Theo, Lucas Sandra (2024-09)
A Framework for Crafting Sustainable Lightweight Concrete in Additive Manufacturing
- Diggs-McGee Brandy, Kreiger Megan, Kreiger Eric, Negron-McFarlane Christian (2024-09)
Case Study on the Use of Thermographic Analysis to Evaluate an Additively Constructed Building
- Thiel Charlotte, Hechtl Christian, Gehlen Christoph, Kränkel Thomas (2024-09)
Sustainability Potential of Additive Manufactured Concrete Structures:
Studies on the Life Cycle Assessment and Circularity of an Extruded Exterior Wall
- Foiles Dreycen, Negron-McFarlane Christian, Kreiger Eric, Kreiger Megan (2024-09)
The Effect of Coarse/Fine Aggregate Ratios on the Properties of Additively Constructed Concrete
- Lei Siduo, Kolawole John, Dobrzanski James, Xu Jie et al. (2024-09)
Enhancing Surface Quality in Additive Manufacturing Applications:
A Micro-Power Float Approach
- Wüchner Roland, Warnakulasuriya Suneth, Asl Reza, Bletzinger Kai-Uwe et al. (2024-09)
Free-Form Structural Optimization for Additive Manufacturing in Construction
- Sadeghzadeh Benam Shaghayegh, Sandalci Ilgin, Bundur Zeynep, Bebek Özkan (2024-09)
Bio-Based Additives to Improve the Rheology of High-Volume Fly-Ash Cement-Based Mortar for 3D Printing
- Kreiger Megan, Kreiger Eric, Mansour Stephan, Monkman Sean et al. (2024-09)
Additive Construction in Practice:
Realities of Acceptance Criteria
- Prihar Arjun, Gupta Shashank, Esmaeeli Hadi, Moini Mohamadreza (2024-08)
Tough Double-Bouligand Architected Concrete Enabled by Robotic Additive Manufacturing
- Sahu Akshay, Panda Biranchi (2024-08)
A TSP-Based Continuous Path-Planning for Additive Manufacturing of Concrete
- Carcassi Olga, Alon Lola (2024-08)
Additive Manufacturing of Natural Materials
- Dahlenburg Maximilian, Tan Yuan, Li Mengxue, Ajmal Moshin et al. (2024-08)
A Flexible and Efficient Calibration Method for Discrete Element Simulations of Additive Manufacturing in Construction
- Buschmann Birger, Henke Klaudius, Asshoff Carsten, Talke Daniel et al. (2024-08)
Additive Manufacturing of Wood-Composite-Parts by Individual Layer Fabrication:
Influence of Process Parameters on Product Properties
- Aghaee Kamran, Li Linfei, Roshan Alireza, Namakiaraghi Parsa (2024-08)
Additive Manufacturing Evolution in Construction:
From Individual Terrestrial to Collective, Aerial, and Extraterrestrial Applications
- Sovetova Meruyert, Calautit John (2024-07)
Design, Calibration and Performance Evaluation of a Small-Scale 3D Printer for Accelerating Research in Additive Manufacturing in Construction
- Jones Kathryn, Li Mo (2024-07)
Life Cycle Assessment of Additively Manufactured Foundations for Ultratall Wind Turbine Towers
- Kloft Harald, Salamatian Ali, Gosslar Joschua, Dorresteijn Evelien et al. (2024-07)
Robotic Rammed Earth-Concrete (RREC):
A Novel Additive Manufacturing Technology to Strengthen Rammed Earth Structures by Integrated Rammed Concrete Parts
- Geng Zifan, Zhang Lizhi, Wu Zhiwen, Tay Yi et al. (2024-07)
Mechanical Properties and Additive Manufacturing of Alkali-Activated Lunar Regolith in Artificial Lunar Environments
- Gleiser Leonie, Pierer Robin, Markin Slava, Butler Marko et al. (2024-07)
Additive Manufacturing with Earth-Based Materials:
Minimization of Shrinkage Deformation
- Babovic Neira, Laghi Vittoria, Kloft Harald (2024-07)
Branching Structure for Reinforcement Anchorage Produced with Wire and Arc Additive Manufacturing Technique
- Trento Daniel, Faleschini Flora, Masoomi Maryam, Pellegrino Carlo et al. (2024-07)
Additive Manufacturing for Earth-Based Materials:
An Experimental Investigation
- Zhong Kuangnan, Huang Kaiyun, Liu Zhichao, Wang Fazhou et al. (2024-07)
CO2-Driven Additive Manufacturing of Sustainable Steel-Slag-Mortars
- Bong Shin, Du Hongjian (2024-06)
Sustainable Additive Manufacturing of Concrete with Low-Carbon Materials
- Krishna R., Rehman Asif, Mishra Jyotirmoy, Saha Suman et al. (2024-06)
Additive Manufacturing of Geopolymer Composites for Sustainable Construction:
Critical Factors, Advancements, Challenges, and Future Directions
- Assunção Badan Julie, Chadha Kunaljit, Vasey Lauren, Brumaud Coralie et al. (2024-06)
Contribution of Production Processes in Environmental Impact of Low-Carbon Materials Made by Additive Manufacturing
- Masoud Laith, Hammoud Ahmad, Mortada Youssef, Masad Eyad (2024-06)
Rheological, Mechanical, and Microscopic Properties of Polypropylene-Fiber-Reinforced Geopolymer Concrete for Additive Manufacturing
- Spencer Lawson, Genedy Moneeb, Strait James, Nair Sriramya et al. (2024-06)
Concrete Gyroid:
An Additive Manufacturing (AM) Method to 3D Print Gyroid Geometries with a Cementitious Material
- Čítek David, Hurtig Karel, Kolísko Jiří, Koteš Peter (2024-06)
Cementitious Material Development for Additive Fabrication
- Romario Yulius, Bhat Chinmai, Ramezani Maziar, Jiang Cho-Pei (2024-06)
Marine-Waste-Management of Oyster-Shell-Waste as Reinforcement for Clay Additive Manufacturing Components
- Espinosa Simon, Slepicka Martin, Borrmann André (2024-06)
Integration of Laser Profiler Feedback into FIM for Additive Manufacturing in Construction
- Lachmayer Lukas, Dittrich Lars, Recker Tobias, Dörrie Robin et al. (2024-06)
In-Line Image-Based Reinforcement Detection for Concrete Additive Manufacturing Processes Using a Convolutional Neural Network
- Čítek David, Hurtig Karel, Bureš Vladislav, Koteš Peter (2024-06)
Cementitious Material Development for Additive Fabrication
- Los Angeles Ortega Rosario Maria, Medina Melany, Duque Rafael, Alberto Jaén Ortega Antonio et al. (2024-05)
Advancing Sustainable Construction:
Insights into Clay-Based Additive Manufacturing for Architecture, Engineering, and Construction
- Stout Ivy, Godfrey Grant, Dayley Jenna, Rodriguez Dexter et al. (2024-05)
Concrete Mixture Properties and Designs for Additive Manufacturing:
A Review of 3D Concrete Printing
- Zhao Hongyu, Wang Xiangyu, Sun Junbo, Wang Yufei et al. (2024-04)
Artificial Intelligence Powered Real-Time Quality Monitoring for Additive Manufacturing in Construction
- Laghi Vittoria, Shakor Pshtiwan, Panda Biranchi, Gasparini Giada (2024-04)
Editorial:
Additive Manufacturing in Construction
- Matus Ilse, Alves Jorge, Góis Joaquim, Vaz-Pires Paulo et al. (2024-04)
Artificial Reefs Through Additive Manufacturing:
A Review of Their Design, Purposes and Fabrication Process for Marine Restoration and Management
- Ahmed Hassan, Giwa Ilerioluwa, Game Daniel, Arce Gabriel et al. (2024-04)
Automated Reinforcement During Large-Scale Additive Manufacturing:
Structural-Assessment of a Dual Approach
- Zaid Osama, Ouni Mohamed (2024-04)
Advancements in 3D Printing of Cementitious Materials:
A Review of Mineral Additives, Properties, and Systematic Developments
- Fleckenstein Julia, Knychalla Bruno, Briels David, Baghdadi Abtin et al. (2024-04)
BREUER × AM:
Functional Hybridisation in Concrete Building Envelope Elements through Additive Manufacturing
- Mechtcherine Viktor, Kuhn Alexander, Mai (née Dressler) Inka, Nerella Venkatesh et al. (2024-03)
Additive Manufacturing with Concrete:
Guidelines for Planning and Implementing Projects
- İlcan Hüseyin, Külak Adnan, Şahmaran Mustafa (2024-03)
3D Printable Construction and Demolition Waste-Based Geopolymer:
Investigating the Effects of Additives on Engineering Properties
- Kotov Evgeny, Nemova Darya, Sergeev Vitaly, Dontsova Anna et al. (2024-03)
Thermal Performance-Assessment of Aerogel Application in Additive Construction of Energy-Efficient Buildings
- Wu Yun-Chen, Wang Xinbo, Li Mo (2024-03)
Role of Thixotropy in Inter-Layer Microstructure and Properties of Additively Manufactured Cementitious Materials
- Dams Barrie, Chen Binling, Kaya Yusuf, Orr Lachlan et al. (2024-03)
Fresh Properties and Autonomous Deposition of Pseudoplastic Cementitious Mortars for Aerial Additive Manufacturing
- Zhou Yiyi, Luo Haoran, Anand Kamal, Singh Amardeep et al. (2024-02)
Sustainable Use of Ultrafine Recycled Glass in Additive Manufactured Reactive-Powder Concrete
- Silva Guido, Quispe Axcel, Baldoceda Jordan, Kim Suyeon et al. (2024-02)
Additive Construction of Concrete Deep Beams Using Low-Cost Characterization Methods and FEM-Based Topological Optimization
- Kakarla Akesh, Kong Ing, Patel Vipulkumar (2024-02)
Additive Manufacturing for Building and Constructions
- Silva Maicon, Silva Lívia, Toralles Berenice, Cardoso Flávia et al. (2024-02)
Building a Sustainable Future:
The Role of Additive Manufacturing in Civil Construction
- Korniejenko Kinga, Gądek Szymon, Dynowski Piotr, Tran Doan et al. (2024-02)
Additive Manufacturing in Underwater Applications
- Vaněk Vojtěch, Chomová Štěpánka, Pěnčík Jan (2024-01)
Additive Technologies in Construction:
Shifting the Paradigm of Building
- Raut Jayant, Pimpalshende Anjusha, Chandak Mayuri, Patil Tejas et al. (2024-01)
A Novel Multi-Method Framework for 3D Printed Fiber-Reinforced Polymer Concrete Utilizing Advance Additive Manufacturing Techniques
- Zhang Ketao, Chermprayong Pisak, Xiao Feng, Tzoumanikas Dimos et al. (2024-01)
Aerial Additive Manufacturing with Multiple Autonomous Robots:
Correction
- Prihar Arjun, Garlock Maria, Najmeddine Aimane, Moini Mohamadreza (2024-01)
Mechanical Performance of Sinusoidally Architected Concrete Enabled by Robotic Additive Manufacturing
- Altıparmak Sadettin, Daminabo Samuel (2024-01)
Suitability-Analysis for Extrusion-Based Additive Manufacturing Process
- Pal Biswajit, Chourasia Ajay, Kapoor Ashish (2024-01)
Intricacies of Various Printing Parameters on Mechanical Behavior of Additively Constructed Concrete
- Wan Zhi, Xu Yading, He Shan, Schlangen Erik et al. (2024-01)
The Use of Additive Manufacturing in Self-Healing Cementitious Materials:
A State of the Art Review
- Gong Lei, Yuan Philip (2024-01)
ISOMORPHISM:
Stylized Translations of 2D Prototype in Additive Clay Printing
- Chadha Kunaljit, Dubor Alexandre, Cabay Edouard, Tayoun Yara et al. (2024-01)
Additive Manufacturing for the Circular Built Environment:
Towards Circular Construction with Earth-Based Materials
- Rocha Douglas, Faria Paulina, Lucas Sandra (2023-12)
Additive Manufacturing of Earth-Based Materials:
A Literature Review on Mortar-Composition, Extrusion, and Processing Earth
- Kaya Yusuf, Orr Lachlan, Kocer Basaran, Kovac Mirko (2023-12)
Aerial Repair and Aerial Additive Manufacturing
- Panda Biranchi, Shakor Pshtiwan, Laghi Vittoria (2023-12)
Powder-Bed Additive Manufacturing
- Panda Biranchi, Shakor Pshtiwan, Laghi Vittoria (2023-12)
Concrete Additive Manufacturing
- Panda Biranchi, Shakor Pshtiwan, Laghi Vittoria (2023-12)
Shotcrete Additive Manufacturing
- Panda Biranchi, Shakor Pshtiwan, Lagaros Nikos (2023-12)
Advanced Modelling for Additive Manufacturing in Construction
- Reißig Silvia, Bedolla Carolin, Meyer Tamara, Mechtcherine Viktor (2023-12)
Rheological Behavior of Fiber-Reinforced LC3 Fine-Grained Concrete in the Context of Additive Manufacturing
- Straßer Alexander, Kränkel Thomas, Gehlen Christoph (2023-12)
Integrating Wire Arc Additive Manufacturing into Selective Paste-Intrusion for Reinforced Concrete Elements:
Effect of Temperature on the Mechanical Performance
- Hechtl Christian, Kränkel Thomas, Gehlen Christoph (2023-12)
Near‐Nozzle Mixing for Additive Manufacturing of Cementitious Mortar:
A Homogeneity Study
- Lindner Marco, Gliniorz Ralf, Männel Mike, Garbe Daniel et al. (2023-12)
Tool-Developments for Additive Manufacturing-Processes with Anchor for the Modern Flow-Production
- Funke Henrik, Lindner Marco, Rudolph Enrico, Gelbrich Sandra (2023-12)
Additive Manufacturing Technology for the Continuous Production of Precision Concrete Elements
- Dams Barrie, Shepherd Paul, Ball Richard (2023-11)
Development and Performance Evaluation of Fibrous Pseudoplastic Quaternary Cement Systems for Aerial Additive Manufacturing
- Wang Qiang-Chen, Yu Si-Nan, Chen Zi-Xiao, Weng Yiwei et al. (2023-11)
Promoting Additive Construction in Fast-Developing Areas:
A Q-Methodology-Analysis of Stakeholder-Perspectives on Policy-Mixes
- Zavaleta Diana, Ñañez Robert, Silva Guido, Ruiz Gaby et al. (2023-11)
Additive Construction Using Enhanced Earthen-Based Composites:
Improvement of the Mechanical Strength and Water Durability Using Chitosan and Agave-Fibers
- Peralta Abadi Patricia, Ahmad Muhammad, Smarsly Kay (2023-11)
Printing-Information-Modeling for Additive Manufacturing of Concrete Structures
- Eversmann Philipp, Rossi Andrea (2023-11)
Towards Construction 4.0:
Computational Circular Design and Additive Manufacturing for Architecture Through Robotic Fabrication with Sustainable Materials and Open-Source Tools
- Henschen Jacob, Blood Daniel, Kawashima Shiho, Kirkvold Heather (2023-11)
Teaching Additive Manufacturing with Consideration for Cementitious Materials
- Taher Ammar, Aşut Serdar, Spoel Willem (2023-10)
An Integrated Workflow for Designing and Fabricating Multi-Functional Building Components Through Additive Manufacturing with Clay
- Briels David, Renz Mauritz, Nouman Ahmad, Straßer Alexander et al. (2023-10)
Monolithic AM Façade:
Multi-Objective Parametric Design-Optimization of Additively Manufactured Insulating Wall Elements
- Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Sanjayan Jay (2023-10)
Investigating PCM Encapsulated NaOH Additive for Set-on-Demand in 3D Concrete Printing
- Rothe Tom, Hühne Christian, Gantner Stefan, Hack Norman (2023-10)
Dynamic Winding Process of Individualized Fiber-Reinforcement Structures for Additive Manufacturing in Construction
- Perez-Rivera Anthony, Kreiger Eric, Stidwell Samuel, Stynoski Peter et al. (2023-10)
Finite-Element Modeling of Reinforced Additively Constructed Concrete Structures
- Bumanis Girts, Sapata Alise, Šinka Māris, Spuriņa Ella et al. (2023-10)
Additive Manufacturing of Lightweight Gypsum and Expanded Polystyrene Granulate Composite
- Mallikarjuna Balichakra, Hareeswar M., Sharath P. (2023-09)
Applications of Additive Manufacturing in Construction and Building Industries
- Routray Krutika, Saha Sunirmal (2023-09)
The Economic Impact of Additive Manufacturing Industries
- Slepicka Martin, Mawas Karam, Borrmann André, Maboudi Mehdi et al. (2023-09)
Digital Twinning in Additive Manufacturing:
Closing the Digital-Physical-Digital Loop by Automated Integration of Captured Geometric Data into Fabrication Information Models
- Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2023-09)
Anisotropic Properties of Additively Manufactured Concrete Elements
- Fleckenstein Julia, Bertagna Federico, Piccioni Valeria, Fechner Mareen et al. (2023-09)
Revisiting Breuer Through Additive Manufacturing:
Passive Solar-Control-Design-Strategies for Bespoke Concrete Building Envelope Elements
- Jewett Jackson, Carstensen Josephine (2023-09)
Topology-Optimization for Material-Extrusion-Based Additive Manufacturing-Processes with Weak Bead Bonding
- Kogai A., Puzatova (nee Sharanova) Anastasiia, Dmitrieva Maria (2023-09)
Modification of Fine Multicomponent Concrete with Activated Component-Based Additive
- Lachmayer Lukas, Müller Nico, Herlyn Thilo, Raatz Annika (2023-08)
Volume Flow-Based Process-Control for Robotic Additive Manufacturing-Processes in Construction
- Pedrosa Ana, Gaspar Florindo (2023-08)
Rheology-Assessment of Mortar-Materials for Additive Manufacturing
- Surehali Sahil, Tripathi Avinaya, Neithalath Narayanan (2023-08)
Anisotropy in Additively Manufactured Concrete Specimens Under Compressive Loading:
Quantification of the Effects of Layer-Height and Fiber-Reinforcement
- Chougan Mehdi, Kheetan Mazen, Ghaffar Seyed (2023-07)
Additive Manufacturing and the Construction Industry
- Villaquirán-Caicedo Mónica, Fernández-González Alejandro, Fernández-García Daniel, Gutiérrez Ruby (2023-07)
Valorization of a Low-Quality Coal-Ash, in the Preparation of Alkali-Activated Inks for Applications in 3D Additive Manufacturing
- Silva Guido, Burgos Valeria, Ñañez Robert, Kim Suyeon et al. (2023-07)
Soil-Cement Matrices for Additive Construction:
3D Printing System Validation and Printing Tests
- Armstrong Kristina, Kamath Dipti, Zhao Xianhui, Rencheck Mitchell et al. (2023-07)
Life Cycle Cost, Energy, and Carbon Emissions of Molds for Pre-Cast Concrete:
Exploring the Impacts of Material-Choices and Additive Manufacturing
- Placzek Gerrit, Schwerdtner Patrick (2023-07)
Concrete Additive Manufacturing in Construction:
Integration Based on Component-Related Fabrication-Strategies
- Mohiuddin Rafay, Cruz Policroniades Miranda, Slepicka Martin, Borrmann André (2023-07)
Optical Process-Control for Extrusion-Based Additive Manufacturing-Methods in Construction
- Mousavi Seyed, Dehestani Mehdi (2023-07)
On the Possibility of Using Waste-Disposable-Gloves as Recycled Fibers in Sustainable 3D Concrete Printing Using Different Additives
- Kazemian Ali, Giwa Ilerioluwa, Ekenel Mahmut (2023-06)
Large-Scale Additive Manufacturing for Automated Construction:
An Overview
- Riaz Raja, Usman Muhammad, Ali Ammar, Majid Usama et al. (2023-06)
Inclusive Characterization of 3D Printed Concrete in Additive Manufacturing:
A Detailed Review
- Schönsee Eric, Hüsken Götz, Jeyifous Olubunmi, Mezhov Alexander et al. (2023-06)
Calculating Rheological Properties of Fresh Mortar for Additive Manufacturing Based on Experimental, Multi-Sensor Data
- Mortada Youssef, Masad Eyad, Kogbara Reginald, Mansoor Bilal et al. (2023-06)
Development of Ca(OH)2-Based Geopolymer for Additive Manufacturing Using Construction Wastes and Nano-Materials
- Jones Kathryn, Li Mo (2023-06)
Life Cycle Assessment of Ultra-Tall Wind Turbine Towers Comparing Concrete Additive Manufacturing to Conventional Manufacturing
- Xu Zhuoyue, Zhang Dawang, Li Hui, Yin Le et al. (2023-06)
Effects of Additives on the Mechanical Properties, Rheology, and Printing Properties of PCC-Based 3DPMs
- Neef Tobias, Dittel Gözdem, Scheurer Martin, Gries Thomas et al. (2023-06)
Utilizing Textiles as Integrated Formwork for Additive Manufacturing with Concrete
- Chen Yu, Zhang Yu, He Shan, Liang Xuhui et al. (2023-06)
Improving Structural Build-Up of Limestone-Calcined-Clay-Cement-Pastes by Using Inorganic Additives
- Kokare Samruddha, Oliveira João, Godina Radu (2023-05)
Life Cycle Assessment of Additive Manufacturing Processes:
A Review
- Mollah Md., Comminal Raphaël, Serdeczny Marcin, Šeta Berin et al. (2023-05)
Computational Analysis of Yield-Stress-Buildup and Stability of Deposited Layers in Material-Extrusion Additive Manufacturing
- Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Muthukrishnan Shravan, Sanjayan Jay (2023-05)
Effect of Magnetorheological Additives on the Buildability of 3D Concrete Printing
- Liu Zhenbang, Li Mingyang, Moo Guo, Kobayashi Hitoshi et al. (2023-05)
Effect of Nano-Structured Silica-Additives on the Extrusion-Based 3D Concrete Printing Application
- Hanifa Mohamad, Figueiredo Bruno, Mendonça Paulo (2023-04)
Additive Manufacturing Earth-Based Composite:
Strategical and Computational Methodology for Building-Shell-Geometries
- Simedru Alexandru, Becze Anca, Cadar Oana, Scurtu Daniela et al. (2023-04)
Structural Characterization of Several Cement-Based Materials Containing Chemical Additives with Potential Application in Additive Manufacturing
- Razzaghian Ghadikolaee Mehrdad, Cerro-Prada Elena, Pan Zhu, Korayem Asghar (2023-04)
Nanomaterials as Promising Additives for High-Performance 3D Printed Concrete:
A Critical Review
- Fischer Oliver, Bos Freek (2023-04)
Additive Manufacturing in Concrete Construction:
Ways to Implement It in Engineering Practice
- Valente Marco, Sambucci Matteo, Chougan Mehdi, Ghaffar Seyed (2023-04)
Composite Alkali-Activated Materials with Waste-Tire-Rubber Designed for Additive Manufacturing:
An Eco-Sustainable and Energy Saving Approach
- Panda Biranchi, Tran Jonathan (2023-03)
Material-Design, Additive Manufacturing, and Performance of Cement-Based Materials
- Ekanayaka Virama, Hürkamp André (2023-03)
Implementation of a Surrogate-Model for a Novel Path‐Based Finite-Element-Simulation for Additive Manufacturing-Processes in Construction
- Qureshi Mohsin, Shiwazi Amira, Kindi Ghassan, Sawafi Bushra et al. (2023-03)
Development of Additive for Concrete 3D Printer by Using Local Materials
- Bajpayee Aayushi, Farahbakhsh Mehdi, Zakira Umme, Pandey Aditi et al. (2023-03)
In-Situ Resource Utilization and Reconfiguration of Soils into Construction Materials for the Additive Manufacturing of Buildings
- Nair Avinash, Aditya S., Adarsh R., Nandan M. et al. (2023-03)
Additive Manufacturing of Concrete:
Challenges and Opportunities
- Tuvayanond Wiput, Prasittisopin Lapyote (2023-02)
Design for Manufacture and Assembly of Digital Fabrication and Additive Manufacturing in Construction:
A Review
- Parisi Fabio, Sangiorgio Valentino, Parisi Nicola, Mangini Agostino et al. (2023-01)
A New Concept for Large Additive Manufacturing in Construction:
Tower-Crane-Based 3D Printing Controlled by Deep-Reinforcement-Learning
- Kloft Harald, Schmitz Linus, Müller Christoph, Laghi Vittoria et al. (2023-01)
Experimental Application of Robotic Wire and Arc Additive Manufacturing-Technique for Strengthening the I-Beam Profiles
- Poudelet Louison, Molina Miguel, Calvo Laura, Cardona Roger et al. (2023-01)
Comparison Between Mono- and Bi-Component Extruders in Concrete Additive Manufacturing
- Dams Barrie, Chen Binling, Shepherd Paul, Ball Richard (2023-01)
Development of Cementitious Mortars for Aerial Additive Manufacturing
- Shanmugan S., Sandhyarani T., Palani Subbaiya (2022-12)
Development of 3D Concrete Printing Using Additive Manufacturing Processes for Construction and Building Industry
- Naboni Roberto, Breseghello Luca (2022-12)
Additive Formwork:
Examining Design, Fabrication Space and Resolution for Bespoke Concrete Elements
- Dvorkin Leonid, Konkol Janusz, Marchuk Vitaliy, Huts Andriy (2022-12)
Effectiveness of Polymer Additives in Concrete for 3D Concrete Printing Using Fly-Ash
- Rückrich Stefanie, Agranati Galit, Grobman Yasha (2022-12)
Earth-Based Additive Manufacturing:
A Field-Oriented Methodology for Evaluating Material-Printability
- Larikova Iuliia, Fleckenstein Julia, Chokhachian Ata, Auer Thomas et al. (2022-12)
Additively Manufactured Urban Multispecies Façades for Building Renovation
- Li Chao, Zahedi Ata, Petzold Frank (2022-11)
Pragmatic Design Decision Support for Additive Construction Using Formal Knowledge and Its Prospects for Synergy with a Feedback Mechanism
- Baek Seoung-Ho, Yang Jung-Ho, Ha Cheol-Woo, Shim Patrick et al. (2022-11)
Design and Evaluation of Additive Manufactured Highly Efficient Inclined-Wing-Type Continuous Mixer
- Dörrie Robin, Laghi Vittoria, Arrè Lidiana, Kienbaum Gabriela et al. (2022-10)
Combined Additive Manufacturing Techniques for Adaptive Coastline Protection Structures
- Hahlbrock David, Braun Michael, Heidel Robin, Lemmen Patrik et al. (2022-10)
Cable Robotic 3D Printing:
Additive Manufacturing on the Construction Site
- Guanziroli Stefano, Marcucci Andrea, Negrini Alberto, Ferrara Liberato et al. (2022-10)
A New Concept of Additive Manufacturing for the Regeneration of Existing Tunnels
- Diwan Anushree, Patel Shiv, Pal Ankit, Dwivedi Ashutosh et al. (2022-10)
Flow Characteristics of Cement Mortar with Varied Silica-Fume for Additive Construction
- Mechtcherine Viktor (2022-09)
Additive Fertigung mit Beton
- Bong Shin, Nematollahi Behzad, Nerella Venkatesh, Mechtcherine Viktor (2022-09)
Method of Formulating 3D Printable Strain-Hardening Alkali-Activated Composites for Additive Construction
- Zhang Ketao, Chermprayong Pisak, Xiao Feng, Tzoumanikas Dimos et al. (2022-09)
Aerial Additive Manufacturing with Multiple Autonomous Robots
- Chougan Mehdi, Ghaffar Seyed, Nematollahi Behzad, Sikora Paweł et al. (2022-09)
Effect of Natural and Calcined-Halloysite-Clay-Minerals as Low-Cost-Additives on the Performance of 3D Printed Alkali-Activated Materials
- Kloft Harald, Dörfler Kathrin, Bährens Meike, Dielemans Gido et al. (2022-09)
The Research Infrastructure of the SFB TRR 277 AMC:
Additive Manufacturing in Construction
- Mortada Youssef, Mohammad Malek, Mansoor Bilal, Grasley Zachary et al. (2022-09)
Development of Test-Methods to Evaluate the Printability of Concrete Materials for Additive Manufacturing
- Lu Bing, Li Mingyang, Wong Teck, Qian Shunzhi (2022-09)
Spray-Based 3D Concrete Printing with Calcium and Polymeric Additives:
A Feasibility Study
- Mir Namra, Khan Shoukat, Kul Anil, Şahin Oğuzhan et al. (2022-08)
Life Cycle Assessment of Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing
- Riegger Felix, Zäh Michael (2022-08)
Additive Manufacturing of Steel-Reinforcements:
Integration of WAAM Reinforcements in Particle-Bed 3D Printing with Selective Cement-Paste-Intrusion
- Khosravani Mohammad, Haghighi Azadeh (2022-08)
Large-Scale Automated Additive Construction:
Overview, Robotic Solutions, Sustainability, and Future Prospect
- Raza Muhammad, Zhong Ray (2022-08)
A Sustainable Roadmap for Additive Manufacturing Using Geopolymers in Construction Industry
- Silva Guido, Ñañez Robert, Zavaleta Diana, Burgos Valeria et al. (2022-07)
Eco-Friendly Additive Construction:
Analysis of the Printability of Earthen-Based Matrices Stabilized with Potato-Starch-Gel and Sisal-Fibers
- Peralta Abadi Patricia, Smarsly Kay (2022-07)
Requirements-Analysis of Additive Manufacturing for Concrete Printing:
A Systematic Review
- Briels David, Kollmannsberger Stefan, Leithner Felicitas, Matthäus Carla et al. (2022-07)
Thermal Optimization of Additively Manufactured Lightweight Concrete Wall Elements with Internal Cellular Structure through Simulations and Measurements
- Aziz Saqib, Kim Ji-Su, Stephan Dietmar, Gengnagel Christoph (2022-06)
Generative Structural Design:
A Cross-Platform Design and Optimization Workflow for Additive Manufacturing
- Dielemans Gido, Lachmayer Lukas, Recker Tobias, Atanasova Lidia et al. (2022-06)
Mobile Additive Manufacturing:
A Case Study of Clay Formwork for Bespoke In-Situ Concrete Construction
- Bos Derk, Wolfs Robert (2022-06)
Automated Visual Inspection of Near-Nozzle Droplet-Formation for Quality-Control of Additive Manufacturing
- Favier Aurélie, Petit Agnès (2022-06)
Strategies for Reducing the Environmental Footprint of Additive Manufacturing via Sprayed Concrete
- Gantner Stefan, Rennen Philipp, Rothe Tom, Hühne Christian et al. (2022-06)
Core Winding:
Force-Flow-Oriented Fiber-Reinforcement in Additive Manufacturing with Concrete
- Lachmayer Lukas, Dörrie Robin, Kloft Harald, Raatz Annika (2022-06)
Process-Control for Additive Manufacturing of Concrete Components
- Ekanayaka Virama, Lachmayer Lukas, Raatz Annika, Hürkamp André (2022-06)
Approach to Optimize the Inter-Layer Waiting Time in Additive Manufacturing with Concrete Utilizing FEM Modeling
- Weger Daniel, Talke Daniel, Lowke Dirk, Henke Klaudius et al. (2022-06)
Additive Manufacturing of Free-Formed Concrete Elements by Selective Binding with Calcium Silicate-Based Cements
- Dörfler Kathrin, Dielemans Gido, Lachmayer Lukas, Recker Tobias et al. (2022-06)
Additive Manufacturing Using Mobile Robots:
Opportunities and Challenges for Building Construction
- Danish Aamar, Khurshid Kiran, Mosaberpanah Mohammad, Ozbakkaloglu Togay et al. (2022-06)
Micro-Structural Characterization, Driving Mechanisms, and Improvement-Strategies for Inter-Layer Bond Strength of Additive Manufactured Cementitious Composites:
A Review
- Lachmayer Lukas, Recker Tobias, Dielemans Gido, Dörfler Kathrin et al. (2022-05)
Autonomous Sensing and Localization of a Mobile Robot for Multi-Step Additive Manufacturing in Construction
- Nistler Maximilian, Kovaleva Daria, Tepper Louis, Blandini Lucio et al. (2022-05)
Camera-Based Process Monitoring for Powder-Bed Additive Manufacturing in Construction
- Geng Zifan, Pan Hao, Zuo Wenqiang, She Wei (2022-05)
Functionally Graded Lightweight Cement-Based Composites with Outstanding Mechanical Performances via Additive Manufacturing
- Lloret-Fritschi Ena, Quadranti Elia, Scotto Fabio, Fuhrimann Lukas et al. (2022-05)
Additive Digital Casting:
From Lab to Industry
- Saruhan Vedat, Keskinateş Muhammer, Felekoğlu Kamile, Felekoğlu Burak (2022-05)
Effect of Fiber-Reinforcement on Extrudability and Buildability of Mineral-Additive-Modified Portland-Cement Mortars:
A Rheometer-Based Simulation-Analysis
- Kuzmenko Kateryna, Ducoulombier Nicolas, Féraille Adélaïde, Roussel Nicolas (2022-05)
Environmental Impact of Extrusion-Based Additive Manufacturing:
Generic Model, Power-Measurements and Influence of Printing-Resolution
- Moini Mohamadreza, Olek Jan, Zavattieri Pablo, Youngblood Jeffrey (2022-04)
Early-Age Buildability-Rheological Properties Relationship in Additively Manufactured Cement-Paste Hollow Cylinders
- Stieler David, Schwinn Tobias, Menges Achim (2022-04)
Additive Formwork in Pre-Cast Construction:
Agent-Based Methods for Fabrication-Aware Modularization of Concrete Building Elements
- Bi Minghao, Xia Lingwei, Tran Jonathan, Li Zhi et al. (2022-04)
Continuous Contour-Zigzag Hybrid Tool-Path for Large-Format Additive Manufacturing
- Ou Ya, Bao Ding, Zhu Guan-Qi, Luo Dan (2022-04)
Additive Fabrication of Large-Scale Customizable Formwork Using Robotic Fiber-Reinforced Polymer Winding
- Dillenburger Benjamin (2022-04)
Additive Construction
- Ignatova Elena, Kirichek Pavel (2022-04)
Additive Manufacturing Based on Building Information-Model-Data
- Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2022-04)
A Grammar-Based Algorithm for Tool-Path-Generation:
Compensating for Material-Deformation in the Additive Manufacturing of Concrete
- Bong Shin, Nematollahi Behzad, Xia Ming, Ghaffar Seyed et al. (2022-04)
Properties of Additively Manufactured Geopolymer Incorporating Mineral-Wollastonite-Micro-Fibers
- Stieler David, Schwinn Tobias, Menges Achim (2022-03)
Automated Modularization for Precast Elements from Additively Manufactured Formwork
- Afarani Hajar, Moser Newell, Garboczi Edward, Esfahani Ebrahim et al. (2022-03)
Print Fidelity Metrics for Additive Manufacturing of Cement-Based Materials
- Bos Freek, Menna Costantino, Pradena Mauricio, Kreiger Eric et al. (2022-03)
The Realities of Additively Manufactured Concrete Structures in Practice
- Lachmayer Lukas, Recker Tobias, Raatz Annika (2022-03)
Contour-Tracking-Control for Mobile Robots Applicable to Large-Scale Assembly and Additive Manufacturing in Construction
- Peerzada Abdul, Rangaraju Prasad, Roberts James, Biehl Adam (2022-03)
Influence of External Vibration on the Gravitational Flow Characteristics of Cementitious Materials:
A Perspective from Application in Additive Manufacturing
- Mechtcherine Viktor, Taubert Markus, Müller Steffen, Will Frank et al. (2022-03)
Additive Manufacturing of Monolithic, Steel-Reinforced Concrete Walls Using CONPrint3D-Reinforced Methods
- Meisel Nicholas, Watson Nathan, Bilén Sven, Duarte José et al. (2022-02)
Design and System Considerations for Construction-Scale Concrete Additive Manufacturing in Remote Environments via Robotic-Arm-Deposition
- Liu Junli, Nguyen Vuong, Panda Biranchi, Fox Kate et al. (2022-02)
Additive Manufacturing of Sustainable Construction Materials and Form-Finding Structures:
A Review on Recent Progresses
- Bakar Muhammad, Saude Nasuha, Ibrahim Mustaffa, Ismail Nur (2022-01)
Additive Manufacturing:
A Review of Current 3D Concrete Printing on Materials, Methods, Applications, Properties and Challenges
- Mollah Md., Comminal Raphaël, Serdeczny Marcin, Pedersen David et al. (2022-01)
Numerical Predictions of Bottom-Layer-Stability in Material-Extrusion Additive Manufacturing
- Pasco Jubert, Lei Zhen, Aranas Clodualdo (2022-01)
Additive Manufacturing in Off-Site Construction:
Review and Future Directions
- Geng Zifan, Wu Peipei, Pan Hao, Zheng Qi et al. (2022-01)
Robust Layer Interface in Cement Additive Manufacturing via Silicate-Penetration and Precipitation
- Jones Scott, Hipp Julie, Allen Andrew, Gagnon Cedric (2021-12)
Rheology and Microstructure Development of Hydrating-Tricalcium-Silicate:
Implications for Additive Manufacturing in Construction
- Diggs-McGee Brandy, Kreiger Eric (2021-12)
Using Isolated Temporal Analysis to Aid in the Assessment of Structural Element Quality for Additive Construction
- Moini Mohamadreza, Olek Jan, Zavattieri Pablo, Youngblood Jeffrey (2021-12)
Open-Span Printing Method for Assessment of Early-Age Deformations of Additively Manufactured Cement-Based Materials Using an Isosceles Triangle
- Pierson Matthew, Pinkerton Luke (2021-12)
Direct Tension Testing of Plain and Fiber-Reinforced Concrete for Use in Additive Construction
- Stidwell Samuel, Kreiger Eric (2021-12)
Determination of Mechanical Properties of Additively Constructed Concrete Based on Specimen-Orientation
- Lachmayer Lukas, Ekanayaka Virama, Hürkamp André, Raatz Annika (2021-11)
Approach to an Optimized Printing Path for Additive Manufacturing in Construction Utilizing FEM Modeling
- Giudice Lorenzo, Wróbel Rafał, Katsamakas Antonios, Leinenbach Christian et al. (2021-11)
Physical Modelling of Reinforced Concrete at a 1:40-Scale Using Additively Manufactured Reinforcement Cages
- Pajonk Adam, Prieto Alejandro, Blum Ulrich, Knaack Ulrich (2021-11)
Multi-Material Additive Manufacturing in Architecture and Construction:
A Review
- Rennen Philipp, Khader Noor, Hack Norman, Kloft Harald (2021-11)
A Hybrid Additive Manufacturing Approach:
Combining Additive Manufacturing and Green-State Concrete Milling to Create a Functionally Integrated Loadbearing Concrete Panel System
- Straßer Alexander, Weger Daniel, Matthäus Carla, Kränkel Thomas et al. (2021-11)
Combining Wire and Arc Additive Manufacturing and Selective Paste-Intrusion for Additively Manufactured Structural Concrete
- Neef Tobias, Mechtcherine Viktor (2021-11)
Simultaneous Integration of Continuous Mineral-Bonded Carbon Reinforcement Into Additive Manufacturing with Concrete
- Gantner Stefan, Rothe Tom, Hühne Christian, Hack Norman (2021-11)
Reinforcement-Strategies for Additive Manufacturing in Construction Based on Dynamic Fiber Winding:
Concepts and Initial Case Studies
- Guimarães Ana, Delgado João, Lucas Sandra (2021-11)
Additive Manufacturing on Building Construction
- Nespor B., Bohac M., Nejedlik M. (2021-11)
Development of Rapid-Set Mortar for Additive Manufacturing
- Wolf Alexander, Rosendahl Philipp, Knaack Ulrich (2021-10)
Additive Manufacturing of Clay and Ceramic Building Components
- Wolfs Robert, Salet Theo, Roussel Nicolas (2021-10)
Filament-Geometry-Control in Extrusion-Based Additive Manufacturing of Concrete:
The Good, the Bad and the Ugly
- Poudelet Louison, Castellví A., Calvo Laura, Cardona Roger et al. (2021-10)
Presentation of a Concrete Additive Manufacturing Extruder with On-Line Rheology Modification Capabilities
- Som Debadri, Zanotti Cristina (2021-09)
Effect of Nano-Additives and Polymeric Viscosity-Modifying-Admixtures (VMA) on the Fresh and Hardened Properties of 3D Printable Concrete Mixtures
- Graziano Angelo, Cavaliere Ilaria, Costantino Dario, Fallacara Giuseppe et al. (2021-09)
Additive Manufacturing in Architecture:
3D Printing Solutions for Vaulted Spaces
- Mechtcherine Viktor, Mai (née Dressler) Inka, Empelmann Martin, Gehlen Christoph et al. (2021-09)
Digital Concrete Construction by Means of Additive Processes:
State of the Art and Research Needs
- Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2021-08)
Experimental Calibration and Compensation for the Continuous Effect of Time, Number of Layers and Volume of Material on Shape Deformation in Small-Scale Additive Manufacturing of Concrete
- Nodehi Mehrab, Asiabanpour Bahram, Omer Liam, Ozbakkaloglu Togay (2021-08)
Material-Characterization of Diversity Aggregated Cementitious Materials Produced with a Modular Lightweight Additive Manufacturing Extrusion-System
- Jamali Koosha, Kaushal Vinayak, Najafi Mohammad (2021-07)
Evolution of Additive Manufacturing in Civil Infrastructure Systems:
A Ten-Year Review
- Leite Gabriela, Fontana Marcele (2021-07)
Additive Manufacturing and the Evolution of the Construction Industry:
A Systematic Literature Review 2015-2021
- Karpova Ekaterina, Skripkiūnas Gintautas, Sedova Anastasiia, Tsimbalyuk Yelyzaveta (2021-07)
Additive Manufacturing of Concrete Wall-Structures
- Kloft Harald, Gehlen Christoph, Dörfler Kathrin, Hack Norman et al. (2021-06)
TRR 277:
Additive Manufacturing in Construction
- Hack Norman, Bahar Mohammad, Hühne Christian, Lopez William et al. (2021-06)
Development of a Robot-Based Multi-Directional Dynamic Fiber Winding Process for Additive Manufacturing Using Shotcrete 3D Printing
- Pacillo Gerardo, Ranocchiai Giovanna, Loccarini Federica, Fagone Mario (2021-05)
Additive Manufacturing in Construction:
A Review on Technologies, Processes, Materials, and Their Applications of 3D and 4D Printing
- Şahin Oğuzhan, İlcan Hüseyin, Ateşli Anıl, Kul Anil et al. (2021-05)
Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing
- Ducoulombier Nicolas, Mesnil Romain, Carneau Paul, Demont Léo et al. (2021-05)
The “Slugs-Test” for Extrusion-Based Additive Manufacturing:
Protocol, Analysis and Practical Limits
- Khajavi Siavash, Tetik Müge, Mohite Ashish, Peltokorpi Antti et al. (2021-04)
Additive Manufacturing in the Construction Industry:
The Comparative Competitiveness of 3D Concrete Printing
- Dielemans Gido, Briels David, Jaugstetter Fabian, Henke Klaudius et al. (2021-04)
Additive Manufacturing of Thermally Enhanced Lightweight Concrete Wall Elements with Closed Cellular Structures
- Helsel Michelle, Popovics John, Stynoski Peter, Kreiger Eric (2021-03)
Non-Destructive Testing to Characterize Inter-Layer Bonds of Idealized Concrete Additive Manufacturing Products
- Lesovik Valeriy, Tolypina Natalia, Glagolev Evgeniy, Tolypin Daniil (2021-03)
Reuse of 3D Additive Manufacturing Concrete Scrap in Construction
- Sikora Paweł, Chougan Mehdi, Cuevas Villalobos Karla, Liebscher Marco et al. (2021-02)
The Effects of Nano- and Micro-Sized Additives on 3D Printable Cementitious and Alkali-Activated Composites:
A Review
- Chougan Mehdi, Ghaffar Seyed, Sikora Paweł, Chung Sang-Yeop et al. (2021-02)
Investigation of Additive Incorporation on Rheological, Microstructural and Mechanical Properties of 3D Printable Alkali-Activated Materials
- Archez Julien, Maitenaz Sébastien, Demont Léo, Charrier Malo et al. (2021-02)
Strategy to Shape, on a Half-Meter Scale, a Geopolymer Composite Structure by Additive Manufacturing
- Ramadany Mohamed, Bajjou Mohamed (2021-01)
Applicability and Integration of Concrete Additive Manufacturing in Construction Industry:
A Case Study
- Lesovik Valeriy, Glagolev Evgeniy, Elistratkin Michail, Podgorniy Daniil (2021-01)
On the Issue of Measuring the Strength of Additively Manufactured Concrete
- Kloft Harald, Gehlen Christoph, Dörfler Kathrin, Hack Norman et al. (2021-01)
TRR 277:
Additive Manufacturing in Construction
- Demont Léo, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2021-01)
Flow-Based Pultrusion of Continuous Fibers for Cement-Based Composite Material and Additive Manufacturing:
Rheological and Technological Requirements
- Muñoz Ivan, Madrid Javier, Muñiz Manuel, Uhart Maylis et al. (2021-01)
Life Cycle Assessment of Integrated Additive-Subtractive Concrete 3D Printing
- Kristombu Baduge Shanaka, Navaratnam Satheeskumar, Zidan Yousef, McCormack Tom et al. (2021-01)
Improving Performance of Additive Manufactured Concrete:
A Review on Material Mix-Design, Processing, Inter-Layer Bonding, and Reinforcing-Methods
- Sepasgozar Samad, Shi Anqi, Yang Liming, Shirowzhan Sara et al. (2020-12)
Additive Manufacturing Applications for Industry 4.0:
A Systematic Critical Review
- Vasilić Ksenija (2020-12)
Additive Manufacturing in Concrete Construction:
Current Status
- Mohammed Alyaa, Saadi Nihad (2020-12)
Ultra-High Early Strength Cementitious Grout Suitable for Additive Manufacturing Applications Fabricated by Using Graphene Oxide and Viscosity Modifying Agents
- Placzek Gerrit, Schwerdtner Patrick (2020-12)
Derivation of Integration Approaches for "Concrete 3D Printing" in the Construction Process Based on Features of Additive Manufacturing
- Singh P., Sreerag K. (2020-12)
Additive Manufacturing Through Digital Concrete by Extrusion- and Non-Extrusion-Method
- Jones Scott (2020-11)
Fused Filament-Fabrication Printer Modified to Dispense Cement-Paste for Concrete Additive Manufacturing Studies
- Dubov Alexey, Ruben Sam (2020-11)
Material Development Standards and Methods for Additive Manufacturing in Construction to Meet Building Code Requirements for Certification
- Papacharalampopoulos Alexios, Bikas Harry, Foteinopoulos Panagis, Stavropoulos Panagiotis (2020-11)
A Path-Planning-Optimization Framework for Concrete-Based Additive Manufacturing Processes
- Vespalec Arnošt, Novák Josef, Kohoutková Alena, Vosynek Petr et al. (2020-11)
Interface Behavior and Interface Tensile Strength of a Hardened Concrete Mixture with a Coarse Aggregate for Additive Manufacturing
- Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2020-11)
Additive Manufacturing of Cementitious Materials by Selective Paste-Intrusion:
Numerical Modeling of the Flow Using a 2D-Axisymmetric Phase-Field-Method
- Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2020-10)
Experimental Prediction of Material-Deformation in Large-Scale Additive Manufacturing of Concrete
- Davtalab Omid, Kazemian Ali, Yuan Xiao, Khoshnevis Behrokh (2020-10)
Automated Inspection in Robotic Additive Manufacturing Using Deep Learning for Layer Deformation Detection
- Qin Hao, Zhang Xiwen (2020-10)
Improvements on the Design of Sand-Structure Additive Manufacturing
- Hansemann Georg, Schmid Robert, Holzinger Christoph, Tapley Joshua et al. (2020-09)
Additive Fabrication of Concrete Elements by Robots:
Lightweight Concrete Ceiling
- Maboudi Mehdi, Gerke Markus, Hack Norman, Brohmann Leon et al. (2020-08)
Current Surveying Methods for the Integration of Additive Manufacturing in the Construction Process
- Sambucci Matteo, Marini Danilo, Sibai Abbas, Valente Marco (2020-08)
Preliminary Mechanical Analysis of Rubber-Cement Composites Suitable for Additive Process Construction
- Wang Shian, Liu Chi, Zhang Guo, Luo Qi et al. (2020-08)
Digital Planting:
Fabrication of Integrated Concrete Green Wall via Additive Manufacturing
- Anton Ana-Maria, Jipa Mihail-Andrei, Reiter Lex, Dillenburger Benjamin (2020-07)
Fast Complexity:
Additive Manufacturing for Prefabricated Concrete Slabs
- Henke Klaudius, Talke Daniel, Matthäus Carla (2020-07)
Additive Manufacturing by Extrusion of Lightweight Concrete:
Strand Geometry, Nozzle Design and Layer Layout
- Battaglia Christopher, Miller Martin, Verian Kho (2020-07)
Print-Cast Concrete:
Additive Manufacturing for 3D Printing Mortar in Robotically Fabricated Green Sand Molds
- Kreiger Eric, Diggs-McGee Brandy, Wood Tanner, MacAllister Bruce et al. (2020-07)
Field Considerations for Deploying Additive Construction
- Ducoulombier Nicolas, Carneau Paul, Mesnil Romain, Demont Léo et al. (2020-07)
The Slug-Test:
In-Line-Assessment of Yield-Stress for Extrusion-Based Additive Manufacturing
- Sambucci Matteo, Valente Marco, Sibai Abbas, Marini Danilo et al. (2020-07)
Rubber-Cement Composites for Additive Manufacturing:
Physical, Mechanical and Thermo-Acoustic Characterization
- Napolitano Rosanna, Menna Costantino, Asprone Domenico, Giudice Lorenzo (2020-07)
Mechanical Characterization of Layer-by-Layer Interface in Concrete Elements Obtained by Additive Manufacturing
- Naboni Roberto, Breseghello Luca (2020-07)
High-Resolution Additive Formwork for Building-Scale Concrete Panels
- Weger Daniel, Baier Daniel, Straßer Alexander, Prottung Sophia et al. (2020-07)
Reinforced Particle-Bed Printing by Combination of the Selective Paste-Intrusion Method with Wire and Arc Additive Manufacturing:
A First Feasibility Study
- Pfeiffer Sven, Dorn Tobias, Hirsch Tamino, Ehm Clemens et al. (2020-07)
Architectural Applications and Workflows for Additive Fabrication with Concrete
- Park Jinsoo, Lee Hojae, Choi Hanshin (2020-07)
Buildability of Mortar-Feedstock in Material-Extrusion Additive Manufacturing
- Codarin Sara (2020-07)
Additive Manufacturing Technologies in Restoration
- Rashid Ans, Khan Shoukat, Ghamdi Sami, Koç Muammer (2020-06)
Additive Manufacturing:
Technology, Applications, Markets, and Opportunities for the Built Environment
- Toklu Yusuf, Bekdaş Gebrail, Geem Zong (2020-06)
Harmony-Search-Optimization of Nozzle Movement for Additive Manufacturing of Concrete Structures and Concrete Elements
- Roussel Nicolas, Spangenberg Jon, Wallevik Jon, Wolfs Robert (2020-06)
Numerical Simulations of Concrete Processing:
From Standard Formative Casting to Additive Manufacturing
- Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schmeier Tobias (2020-06)
Extrusion-Based Additive Manufacturing with Carbon Reinforced Concrete:
Concept and Feasibility Study
- Carstensen Josephine (2020-06)
Topology-Optimization with Nozzle-Size-Restrictions for Material-Extrusion-Type Additive Manufacturing
- Fratello Virginia, Rael Ronald (2020-05)
Innovating Materials for Large-Scale Additive Manufacturing:
Salt, Soil, Cement and Chardonnay
- Claßen Martin, Ungermann Jan, Sharma Rahul (2020-05)
Additive Manufacturing of Reinforced Concrete:
Development of a 3D Printing Technology for Cementitious Composites with Metallic Reinforcement
- Kloft Harald, Krauss Hans-Werner, Hack Norman, Herrmann Eric et al. (2020-05)
Influence of Process Parameters on the Inter-Layer Bond Strength of Concrete Elements Additive Manufactured by Shotcrete 3D Printing
- Ducoulombier Nicolas, Demont Léo, Chateau Camille, Bornert Michel et al. (2020-04)
Additive Manufacturing of Anisotropic Concrete:
A Flow-Based Pultrusion of Continuous Fibers in a Cementitious Matrix
- Carneau Paul, Mesnil Romain, Roussel Nicolas, Baverel Olivier (2020-04)
Additive Manufacturing of Cantilever:
From Masonry to Concrete 3D Printing
- Chougan Mehdi, Ghaffar Seyed, Jahanzat Mohammad, Albar Abdulrahman et al. (2020-04)
The Influence of Nano-Additives in Strengthening Mechanical Performance of 3D Printed Multi-Binder Geopolymer Composites
- Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
Extrusion-Based Additive Manufacturing with Cement-Based Materials:
Production Steps, Processes, and Their Underlying Physics
- Vergara Luis, Colorado Henry (2020-03)
Additive Manufacturing of Portland Cement-Pastes with Additions of Kaolin, Superplastificant and Calcium-Carbonate
- Lakhal Othman, Chettibi Taha, Belarouci Abdelkader, Dherbomez Gerald et al. (2020-02)
Robotized Additive Manufacturing of Funicular Architectural Geometries Based on Building Materials
- Ma Guowei, Salman Nazar, Wang Li, Wang Fang (2020-02)
A Novel Additive Mortar Leveraging Internal Curing for Enhancing Inter-Layer Bonding of Cementitious Composite for 3D Printing
- Ahmed Zeeshan, Bos Freek, Brunschot Maikel, Salet Theo (2020-02)
On-Demand Additive Manufacturing of Functionally Graded Concrete
- Foteinopoulos Panagis, Esnault Vivien, Komineas George, Papacharalampopoulos Alexios et al. (2020-01)
Cement-Based Additive Manufacturing:
Experimental Investigation of Process Quality
- Gradeci Klodian, Labonnote Nathalie (2019-11)
On the Potential of Integrating Building Information Modelling for the Additive Manufacturing of Concrete Structures
- Kloft Harald, Hack Norman, Mainka Jeldrik, Brohmann Leon et al. (2019-11)
Additive Manufacturing in Construction:
First 3D-Printed Reinforced Concrete Components Using Shotcrete 3D Printing (SC3DP) Technology
- Nazarian Shadi, Duarte José, Bilén Sven, Memari Ali et al. (2019-11)
Additive Manufacturing of Architectural Structures:
An Interplay Between Materials, Systems, and Design
- Paolini Alexander, Kollmannsberger Stefan, Rank Ernst (2019-10)
Additive Manufacturing in Construction:
A Review on Processes, Applications, and Digital Planning Methods
- Shen Hongyao, Pan Lingnan, Qian Jun (2019-10)
Research on Large-Scale Additive Manufacturing Based on Multi-Robot Collaboration Technology
- Vasilić Ksenija (2019-09)
Additive Manufacturing in Concrete Construction:
Current Status
- Gaag Bert, Ijselmuijden Kees, Kardas Maurice, Herwaarden Joël et al. (2019-09)
Structural Bridge Design for Additive Manufacturing
- Valente Marco, Sibai Abbas, Sambucci Matteo (2019-09)
Extrusion-Based Additive Manufacturing of Concrete Products:
Revolutionizing and Remodeling the Construction Industry
- Kim Kwan, Yeon Jaeheum, Lee Hee, Yeon Jung (2019-08)
Dimensional Stability of SBR-Modified Cementitious Mixtures for Use in 3D Additive Construction
- Yeon Kyu-Seok, Kim Kwan, Yeon Jaeheum, Lee Hee (2019-08)
Compressive and Flexural Strengths of EVA-Modified Mortars for 3D Additive Construction
- Watson Nathan, Meisel Nicholas, Bilén Sven, Duarte José et al. (2019-08)
Large-Scale Additive Manufacturing of Concrete Using a Six-Axis Robotic Arm for Autonomous Habitat Construction
- Kim Kwan, Yeon Jaeheum, Lee Hee, Yeon Kyu-Seok (2019-08)
Feasibility Study of SBR-Modified Cementitious Mixtures for Use as 3D Additive Construction Materials
- Lee Hojae, Kim Jang-Ho, Moon Jae-Heum, Kim Won-Woo et al. (2019-08)
Correlation Between Pore Characteristics and Tensile Bond Strength of Additive Manufactured Mortar Using X-Ray Computed Tomography
- Yeon Kyu-Seok, Kim Kwan, Yeon Jaeheum, Lee Hee (2019-07)
Fresh Properties of EVA-Modified Cementitious Mixtures for Use in Additive Construction by Extrusion
- Foteinopoulos Panagis, Papacharalampopoulos Alexios, Stavropoulos Panagiotis (2019-06)
Block-Based Analytical Hierarchy Process Applied for the Evaluation of Construction Sector Additive Manufacturing
- Keita Emmanuel, Bessaies-Bey Hela, Zuo Wenqiang, Belin Patrick et al. (2019-06)
Weak Bond Strength Between Successive Layers in Extrusion-Based Additive Manufacturing:
Measurement and Physical Origin
- Bhardwaj Abhinav, Jones Scott, Kalantar Negar, Pei Zhijian et al. (2019-06)
Additive Manufacturing Processes for Infrastructure Construction:
A Review
- Comminal Raphaël, Serdeczny Marcin, Pedersen David, Spangenberg Jon (2019-06)
Motion-Planning and Numerical Simulation of Material-Deposition at Corners in Extrusion Additive Manufacturing
- Kontovourkis Odysseas, Tryfonos George, Georgiou Christos (2019-06)
Robotic Additive Manufacturing (RAM) with Clay Using Topology-Optimization Principles for Tool-Path-Planning:
The Example of a Building Element
- Hamidi Fatemeh, Aslani Farhad (2019-05)
Additive Manufacturing of Cementitious Composites:
Materials, Methods, Potentials, and Challenge
- Serdeczny Marcin, Comminal Raphaël, Pedersen David, Spangenberg Jon (2019-05)
Numerical Simulations of the Mesostructure Formation in Material-Extrusion Additive Manufacturing
- Urhal Pinar, Weightman Andrew, Diver Carl, Bartolo Paulo (2019-05)
Robot-Assisted Additive Manufacturing:
A Review
- Diggs-McGee Brandy, Kreiger Eric, Kreiger Megan, Case Michael (2019-04)
Print Time vs. Elapsed Time:
A Temporal Analysis of a Continuous Printing Operation for Additive Constructed Concrete
- Kreiger Eric, Kreiger Megan, Case Michael (2019-04)
Development of the Construction Processes for Reinforced Additively Constructed Concrete
- Craveiro Flávio, Duarte José, Bártolo Helena, Bartolo Paulo (2019-04)
Additive Manufacturing as an Enabling Technology for Digital Construction:
A Perspective on Construction 4.0
- Bentz Dale, Jones Scott, Bentz Isaiah, Peltz Max (2019-02)
Towards the Formulation of Robust and Sustainable Cementitious Binders for 3D Additive Construction by Extrusion
- Gaudillière-Jami Nadja, Duballet Romain, Bouyssou Charles, Mallet Alban et al. (2019-02)
Building Applications Using Lost Formworks Obtained Through Large-Scale Additive Manufacturing of Ultra-High-Performance Concrete
- Rushing Todd, Stynoski Peter, Barna Lynette, Chaar Ghassan et al. (2019-02)
Investigation of Concrete Mixtures for Additive Construction
- Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Malek Sardar (2019-01)
Review of Emerging Additive Manufacturing Technologies in 3D Printing of Cementitious Materials in the Construction Industry
- Zivkovic Sasa, Battaglia Christopher (2018-10)
Rough-Pass-Extrusion-Tooling:
CNC Post-Processing of 3D Printed Sub-Additive Concrete Lattice-Structures
- Ashrafi Negar, Duarte José, Nazarian Shadi, Meisel Nicholas (2018-10)
Evaluating the Relationship Between Deposition and Layer-Quality in Large-Scale Additive Manufacturing of Concrete
- Fiske Michael, Edmunson Jennifer, Weite Edward, Fikes John et al. (2018-09)
The Disruptive Technology That Is Additive Construction:
System Development Lessons Learned for Terrestrial and Planetary Applications
- Gaudillière-Jami Nadja, Duballet Romain, Bouyssou Charles, Mallet Alban et al. (2018-09)
Large-Scale Additive Manufacturing of Ultra-High-Performance Concrete of Integrated Formwork for Truss-Shaped Pillars
- Battaglia Christopher, Miller Martin, Zivkovic Sasa (2018-09)
Sub-Additive 3D Printing of Optimized Double Curved Concrete Lattice Structures
- Lindemann Hendrik, Gerbers Roman, Ibrahim Serhat, Dietrich Franz et al. (2018-09)
Development of a Shotcrete 3D Printing (SC3DP) Technology for Additive Manufacturing of Reinforced Freeform Concrete Structures
- Moini Mohamadreza, Olek Jan, Magee Bryan, Zavattieri Pablo et al. (2018-09)
Additive Manufacturing and Characterization of Architectured Cement-Based Materials via X-Ray Micro-Computed Tomography
- Lowke Dirk (2018-09)
Concrete, the Predestined Building Material for Additive Manufacturing
- Moini Mohamadreza, Olek Jan, Youngblood Jeffrey, Magee Bryan et al. (2018-08)
Additive Manufacturing and Performance of Architectured Cement-Based Materials
- Hillegas James, Liu Rui, Liu Bosheng, Sanchez Alex et al. (2018-07)
Engineering Properties Influencing Clayey Materials for Additive Manufacturing
- Albar Abdulrahman, Swash Mohammad, Ghaffar Seyed (2018-07)
Scalable Additive Manufacturing Solution for Construction
- Bentz Dale, Jones Scott, Bentz Isaiah, Peltz Max (2018-06)
Towards the Formulation of Robust and Sustainable Cementitious Binders for 3D Additive Construction by Extrusion
- Bhardwaj Abhinav, Zou Na, Pei Zhijian (2018-06)
Additive Manufacturing for Civil Infrastructure Design and Construction:
Current State and Gaps
- Kumar Sanjay (2018-06)
Process Chain Development for Additive Manufacturing of Cemented Carbide
- Lao Wenxin, Tay Yi, Quirin Didier, Tan Ming (2018-05)
The Effect of Nozzle Shapes on the Compactness and Strength of Structure Printed in Additive Manufacturing of Concrete
- Ghaffar Seyed, Corker Jorge, Fan Mizi (2018-05)
Additive Manufacturing Technology and Its Implementation in Construction as an Eco-Innovative Solution
- Ibrahim Serhat, Olbrich Alexander, Lindemann Hendrik, Gerbers Roman et al. (2018-02)
Automated Additive Manufacturing of Concrete Structures without Formwork:
Concept for Path-Planning
- Ngo Tuan, Kashani Alireza, Imbalzano Gabriele, Nguyen Quynh et al. (2018-02)
Additive Manufacturing (3D Printing):
A Review of Materials, Methods, Applications and Challenges
- Delgado Camacho Daniel, Clayton Patricia, Brien William, Seepersad Carolyn et al. (2018-02)
Applications of Additive Manufacturing in the Construction Industry:
A Forward-Looking Review
- Villacis N., Gualavisi M., Narváez-Muñoz Christian, Carrión L. et al. (2017-11)
Additive Manufacturing of a Rheological Characterized Cement-Based Composite Material
- Panda Biranchi, Paul Suvash, Lim Jian, Tay Yi et al. (2017-08)
Additive Manufacturing of Geopolymer for Sustainable Built Environment
- Craveiro Flávio, Bártolo Helena, Gale Andrew, Duarte José et al. (2017-07)
A Design Tool for Resource-Efficient Fabrication of 3D Graded Structural Building Components Using Additive Manufacturing
- Izard Jean-Baptiste, Dubor Alexandre, Hervé Pierre-Elie, Cabay Edouard et al. (2017-07)
On the Improvements of a Cable-Driven Parallel Robot for Achieving Additive Manufacturing for Construction
- Delgado Camacho Daniel, Clayton Patricia, Brien William, Ferron Raissa et al. (2017-07)
Applications of Additive Manufacturing in the Construction Industry:
A Prospective Review
- Kontovourkis Odysseas, Tryfonos George (2017-07)
Integrating Parametric Design with Robotic Additive Manufacturing for 3D Clay Printing:
An Experimental Study
- Krimi Imane, Lafhaj Zoubeir, Ducoulombier Laure (2017-05)
Prospective Study on the Integration of Additive Manufacturing to Building Industry:
Case of a French Construction Company
- Rushing Todd, Chaar Ghassan, Eick Brian, Burroughs Jedadiah et al. (2017-01)
Investigation of Concrete Mixtures for Additive Construction
- Biswas Kaushik, Rose James, Eikevik Leif, Guerguis Maged et al. (2016-11)
Additive Manufacturing Integrated Energy:
Enabling Innovative Solutions for Buildings of the Future
- Labonnote Nathalie, Rønnquist Anders, Manum Bendik, Rüther Petra (2016-09)
Additive Construction:
State of the Art, Challenges and Opportunities
- Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2016-08)
Additive Manufacturing of Concrete in Construction:
Potentials and Challenges of 3D Concrete Printing
- Duballet Romain, Gosselin Clément, Roux Philippe (2015-10)
Additive Manufacturing and Multi-Objective Optimization of Graded Polystyrene-Aggregate Concrete Structures
- Werkheiser Niki, Edmunson Jennifer, Fiske Michael, Khoshnevis Behrokh (2015-09)
On the Development of Additive Construction Technologies for Application to Development of Lunar/Martian Surface Structures Using In-Situ Materials
- Duro-Royo Jorge, Mogas-Soldevila Laia, Oxman Neri (2015-06)
Flow-Based Fabrication:
An Integrated Computational Workflow for Design and Digital Additive Manufacturing of Multifunctional Heterogeneously Structured Objects
- Carlo Tony, Khoshnevis Behrokh, Chen Yong (2013-11)
Manufacturing Additively, with Fresh Concrete
- Howe Scott, Wilcox Brian, McQuin Christopher, Townsend Julie et al. (2013-09)
Faxing Structures to the Moon:
Freeform Additive Construction System (FACS)
- Lim Sungwoo, Buswell Richard, Le Thanh, Austin Simon et al. (2011-07)
Developments in Construction-Scale Additive Manufacturing Processes
- Soar Rupert (2005-11)
Additive Manufacturing Technologies for the Construction Industry