Skip to content

#method

Keywords by Co - Occurrence

  1. Alvarez Eduardo, Curth Alexander, Mueller Caitlin, Norford Leslie (2026-01)
    Enhancing the Dynamic Thermal Performance of Wall Components Through Shape Optimization:
    Method and Application to Extruded Blocks and 3D-Printed Walls
  2. Liu Mei, Wang Huai, Li Yang, Li Xiulin et al. (2025-12)
    Post-Fire Mechanical Properties of 3D Printed Concrete Under Different Cooling Methods
  3. Okangba Stanley, Ngcobo Ntebo, Mahachi Jeffrey (2025-12)
    Bridging Innovation and Governance:
    A UTAUT-Based Mixed-Method Study of 3D Concrete Printing Technology Acceptance in South Africa
  4. Kovaleva Daria, Haufe Carl, Miller Olga, Gericke Oliver et al. (2025-12)
    Lightweight and Sustainable Construction with Concrete:
    The Role of Digital Design and Manufacturing Methods at ILEK
  5. Rangel Carolina, Salet Theo, Lucas Sandra (2025-12)
    A Design Methodology for Sustainable Lightweight 3D-Printable Concrete with SCMs
  6. Han Seongho, Ahn Eunjong, Shin Myoungsu, Popovics John et al. (2025-12)
    Methodology for Surface Defect Assessment in 3D Concrete Printing Using Computer-Vision and Ultrasonic Testing Considering Structural Build-Up
  7. Guerrero Ana, Asensio Eloy, Fernández Fernando (2025-12)
    Large‐Format Additive Manufacturing with Cement and Clays:
    Characterization Methods
  8. Solaiappan Kamesh, Foruzanmehr M. (2025-11)
    A Rheological Test Method for Determining the Printability Zone of Cementitious 3D Printers
  9. Soshinskiy Olexander, Rashkevich Nina, Shakhov Stanislav, Melnychenko Andrii (2025-11)
    Formulating a Calculation Methodology for Assessing the Strength Characteristics of Building Structures Constructed with a Construction 3D Printer
  10. Ma Jiayue, Samarasinghe Don, Rotimi James, Zuo Kelvin (2025-11)
    Establishing Research Methods for 3D Concrete Printing Supply Chain Studies:
    Insights from Literature and Practice
  11. Zhou Jiehang, Du Longyu, Wu Kai, Lai Jianzhong et al. (2025-11)
    Effective Factors and a Prediction Method on Extrusion Flow of 3D Printed Concrete
  12. Khalid Lawand, Mermerdaş Kasım, Ekmen Şevin, Khidhir Bzeni Dillshad (2025-11)
    Optimization of Fresh and Hardened Properties of Fiber-Reinforced 3D Printed Geopolymer Composites Using Response Surface Methodology:
    A Data-Driven Approach Based on Prior Experimental Studies
  13. Ye Fan, Ren Xiaodan (2025-10)
    A Eulerian Circuit-Based Reinforcement Learning Path Optimization Method for 3D Concrete Printing
  14. Simwanda Lenganji, David Abayomi, Gatheeshgar Perampalam, Olalusi Oladimeji et al. (2025-10)
    Optimisation of Interlayer Bond Strength in 3D-Printed Concrete Using Response Surface Methodology and Artificial Neural Networks
  15. Wan Qian, Wang Li, Huang Xiaodong, Wu Hao et al. (2025-10)
    Shape Optimization Based on Isogeometric Analysis for 3D Concrete Printing:
    A Design Method for Printing-Friendly Structure
  16. Rahman Mahfuzur, An Dong, Rawat Sanket, Yang Richard et al. (2025-09)
    Development of Green 3D Printable Cementitious Composites Using Multi-Response Optimisation Method
  17. Wang Li, Fan Haichen, Wang Qiang, Bai Gang et al. (2025-09)
    Design Method and Force Transmission Mechanism of 3D Printed Concrete Truss Beams Reinforced with 3D Conical Reinforcement
  18. Chortis Alexandros, Gkountas Charalampos, Melidis Lazaros, Katakalos Konstantinos (2025-09)
    Seismic Performance Evaluation of 3D-Printed Concrete Walls Through Numerical Methods
  19. Wang Cheinfei, Lian Junyin, Fang Yunhui, Fan Guangming et al. (2025-08)
    Rheological Optimization of 3D-Printed Cementitious Materials Using Response Surface Methodology
  20. Raza Muhammad, Besklubova Svetlana, Kravchenko Ekaterina, Zhong Ray (2025-07)
    Economic Viability of 3D Concrete Printing:
    A Comparative Study with Traditional Construction Method
  21. Amdouni Marwen, Nasraoui Helmi, Rezgui Mohamed, Trabelsi Ali (2025-07)
    Use of the RDPP-SF Method to Analyze Rheology Variation in an AM-Cement-Based Process
  22. Gerges Isabelle, Farraj Faten, Youssef Nicolas, Antczak Emmanuel et al. (2025-07)
    Methodologies to Design Optimum 3D Printable Mortar Mix:
    A Review
  23. Shiotani Tomoki, Asaue Hisafumi, Ogura Hiroki, Okude Nobuhiro et al. (2025-07)
    Evaluation of Permanent 3D Printed Formwork of a Bridge Pier Using Non-Destructive Testing Methods
  24. Chen Yanjuan, Cheikh Khadija, Rahier Hubert (2025-07)
    Methodology for the Design and Optimization of Potassium Silicate-Activated Slag Used as the Binder of 3D Printable Materials
  25. Wang Tongcai, Gu Guangshuai, Zhang Rihan, Cui Qianshun et al. (2025-07)
    Additive Manufacturing of Lunar Regolith via Resin-Based Binder and Material Extrusion Method for High-Performance In-Situ Manufacturing on the Moon
  26. Rizzieri Giacomo, Meni Simone, Cremonesi Massimiliano, Ferrara Liberato (2025-07)
    A Particle Finite Element Method for Investigating the Influence of Material and Process Parameters in 3D Concrete Printing
  27. Ali Syed, Haq Mohd, Khan Rizwan, Hashmi Ahmad (2025-07)
    A Comprehensive Review on 3D Printing of Concrete:
    Materials, Methods and Mechanical Properties
  28. Karamara Merve, Bogdanski Moritz-Ole, Zöller Raphael, Albrecht Sophie et al. (2025-06)
    Increasing Efficiency and Sustainability:
    A Comparative Analysis of Concrete 3D Printing and Traditional Methods Based on Case Studies
  29. Ahadi Bahram, Valiente López María (2025-05)
    Zigzag Reinforcement Method for 3D Concrete Printing
  30. Asif Usama (2025-05)
    Comparative Analysis of Evolutionary Computational Methods for Predicting Mechanical Properties of Fiber-Reinforced 3D Printed Concrete
  31. Liu Wenliang, Ji Dongsheng, Cui Weijiu, Shi Xinyu et al. (2025-05)
    Research Progress on Quality Control Method of Concrete 3D Printing Based on Computer Vision
  32. Zhou Zhuang, Shi Xinyu, Zhou Haining, Liang Yuan et al. (2025-05)
    Research on 3DPC Construction Method for Structural High-Performance Component Generation
  33. Luo Xiaoyu, Zhao Yuqi, Yao Xiaofei, Zou Cunjun et al. (2025-05)
    3D Printing Concrete Interface Treatment Based on Physical and Chemical Methods:
    A Review
  34. Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi et al. (2025-05)
    Modelling of 3D Concrete Printing Based on SPH Method with the Herschel-Bulkley-Papanastasiou Rheology Model
  35. Hashimoto Katsufumi, Nakase Kota, Yoshihara Rei, Honda Yoshiki et al. (2025-04)
    Evaluation and Investigation of Material and Mechanical Property of 3D Printed Concrete by Means of Non-Destructive Testing Methods
  36. Xiong Baocheng, Liu Huanbao, Nie Ping, Li Xiaoxi et al. (2025-04)
    Effect of Different Surface Modification Methods of Small Particle Size Recycled Rubber Powder on Mechanical Properties of 3D Printed Concrete
  37. Maralapalle Vedprakash, Kumavat Hemraj, Nadaf Maheboobsab, Zende Aijaz et al. (2025-04)
    Optimizing 3D Geopolymer Concrete for Sustainable Construction:
    A Review of Material Selection, Printing Methods, and Properties
  38. Gulati Hemant, Lu Tianxing (2025-03)
    Customized 3D Printable Concrete:
    A Systematic Review of Challenges, Methodologies, and Adoption Strategies
  39. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wong Teck et al. (2025-03)
    Investigate Mechanisms of Different Printing Parameters on the Mechanical Anisotropy of 3D Concrete Printing Elements by Using Computed Tomography Scan and Computational Fluid Dynamics Methods
  40. Meyuhas Ohad, Larianovsky Pavel, Bentur Arnon, Magdassi Shlomo et al. (2025-03)
    Methods for Earth-Based Falsework in Multi-Material Additive Manufacturing at an Architectural Scale
  41. Khanverdi Mohsen, Das Sreekanta (2025-03)
    Testing Prisms as a Method for Assessing Compressive Properties of 3D-Printed Structural Members:
    Experimental and Numerical Studies
  42. Sharma Shivam, Tahlawi M., Delavar Mohammad, Sideris Petros (2025-03)
    Structural Design Methodology for Low-Rise 3D Printed Concrete (3DPC) Buildings Subjected to Non-Seismic Loading:
    Description, Application and Validation
  43. Salaimanimagudam M., Jayaprakash Jaganathan, Anwar Mohammed (2025-02)
    Selection of Reinforcement Incorporation Method for 3D Printed Concrete Using MCDM
  44. Chadha Kunaljit, Vasey Lauren, Gramazio Fabio, Kohler Matthias (2025-02)
    Adaptive Robotic Tamping:
    A Novel Robotic Method for Formative Surface Finishing in Earth-Based Additive Manufacturing
  45. Tanyildizi Harun, Coskun Ahmet, Seloglu Maksut, Durmaz Taner (2025-01)
    Examination of Mechanical Properties of 3D Printed Geopolymer-Mortar Using the Taguchi -Method
  46. Zhong Jianjun, Lyu Libo, Deng Yongjie, Ma Haiyan et al. (2025-01)
    An Evaluation-Method for the Printability of Magnesium-Phosphate-Cement Concrete for Integrated Mixing-Stirring-Extrusion Rapid 3D Printing
  47. Ahn Eunjong, Han Seongho, Shin Myoungsu, Khayat Kamal et al. (2025-01)
    Novel Method to Evaluate 3D Printed Concrete Quality Using Ultrasonic Scatter-Energy-Techniques
  48. Pierre Alexandre, Perrot Arnaud (2025-01)
    Alternative Printing-Methods for Cementitious Materials
  49. Nan Bo, Qiao Youxin, Leng Junjie, Bai Yikui (2025-01)
    Advancing Structural Reinforcement in 3D Printed Concrete:
    Current Methods, Challenges, and Innovations
  50. Santos da Mata Gomes Daniela, Rocutan Melina, Pereira Lucas, Motezuki Fabio et al. (2024-12)
    Simulation of 3D Concrete Printing Using an Implicit Formulation of the Moving Particle Semi-Implicit Method
  51. Liu Huawei, Wang Yifei, Zhu Chao, Wu Yiwen et al. (2024-11)
    Design of 3D Printed Concrete Masonry for Wall Structures:
    Mechanical Behavior and Strength Calculation Methods Under Various Loads
  52. Vasey Lauren, Chadha Kunaljit, Kango Ananya, Leung Victor et al. (2024-11)
    Impact Printing:
    A Novel Robotic Additive Manufacturing Method for Circular, High-Volume Construction
  53. Wang Li, Lin Wenyu, Wan Qian, Li Zhijian et al. (2024-11)
    Manufacturing Accuracy Improvement of Concrete Product by Hybrid Additive-Subtractive Method Based on the Time-Dependent Characteristics of Cementitious Materials
  54. Bono Victor, Ducoulombier Nicolas, Loulha Sarena, Mesnil Romain et al. (2024-11)
    Toward 3D Printable Low-Carbon Mortar:
    Method and Application
  55. Soave Francesco, Muciaccia Giovanni, Ferrara Liberato (2024-11)
    An Indirect Methodology to Evaluate the Rheological Properties of a Digitally Fabricated Concrete Incorporating Corrosion Inhibitors
  56. Eid Zainab, Almerbati Nehal (2024-10)
    Methodologies to Assess the Environmental Impact of 3D Printed Buildings Using Construction Waste
  57. Josa Irene, Fuente Albert (2024-10)
    Traditional and Modern Methods of Construction:
    Comparative Study of the Sustainability of Single‐Family Homes
  58. Liu Chao, Zhang Yukun, Liu Huawei, Wu Yiwen et al. (2024-10)
    Inter-Layer Reinforced 3D Printed Concrete with Recycled Coarse Aggregate:
    Shear Properties and Enhancement Methods
  59. An Ning, Wang Huai, Le Liu, Li Shuo et al. (2024-10)
    Real-Time Monitoring of Extrudability and Buildability in 3D Concrete Printing Based on Target Detection Method
  60. Chen Yuning, Xia Kailun, Dong Enlai, Cao Ruilin et al. (2024-10)
    A Mechanical Characteristic Capture-Method Considering Printing-Configurations for Buildability-Modeling in Concrete 3D Printing
  61. Vele Jiří, Prokop Simon, Ciganik Ondrej, Kurilla Lukáš et al. (2024-09)
    Non-Planar 3D Printing of Clay Columns:
    A Method for Improving Stability and Performance
  62. Ivaniuk Egor, Mechtcherine Viktor (2024-09)
    A Method for Measuring the Bond Strength Between Impregnated Carbon-Yarn and 3D Printed Strain-Hardening Cementitious Composites
  63. Monfort Maxime, Kim Jongbeom, Schaeffer Julien, Pastorelli Florent et al. (2024-09)
    Sprayed Concrete Automation:
    A Unique and Complete Digital Fabrication Method
  64. Osta Mohammad, Mukhtar Faisal (2024-09)
    Buildability-Analysis of 3D Concrete Printing Using Finite-Element-Method
  65. Song Xinlei, Sun Xiaoyan, Wang Hailong (2024-09)
    Determination of Optimal Flowability of 3D Printing Concrete Based on Multi-Objective Optimization Method
  66. Gürel Şeyma, Wangler Timothy, Garger Moritz, Flatt Robert (2024-09)
    Residence-Time-Distribution Evaluation Method for In-Line Mixing Processes in Digital Concrete
  67. Zhang Sisi, Claßen Martin, Olesch Mirco, Mäde Konrad et al. (2024-09)
    Prototypical Realization of Fully Automated 3D Printing of Reinforced Concrete Using AMoRC Method
  68. Rehman Atta, Kang Seungwoo, Kim Jung-Hoon (2024-09)
    Nozzle-Integrated Slump-Scanner-Test:
    Development of an Automated Shape-Stability and Instantaneous Yield-Stress-Measurement-Method for the Set-on-Demand 3D Concrete Printing
  69. Kobayashi Noriyuki, Asakawa Tomoya, Nishiwaki Tomoya, Egawa Ryo et al. (2024-09)
    An Automated Pin Insertion Method for 3DCP and Its Reinforcement Effects on Beam Specimens
  70. Zhang Qing, Bégaud Fabienne, Khatib Omar (2024-09)
    Quantitative Comparison of Elastic Modulus Measurement Techniques in Early-Age 3D Printable Mortar:
    Insights from Compression, Ultrasonic, and Microindentation Methods
  71. Rehman Atta, Kang Manmin, Basha Shaik, Choi Kichang et al. (2024-09)
    Knife-Cut-Test of Concrete:
    The Introduction of a New Test-Method for Measurement of the Structural Build-Up of 3D Concrete Printing-Materials
  72. Schneider Philip, Dietrich Sebastian, Richter Christiane, Asl Reza et al. (2024-09)
    Fabrication-Aware Design Method and Experimental Assessment of a Segmented Concrete Pedestrian Bridge Using SPI Technology.
  73. Yang Rijiao, Xu Chengji, Lan Yan, Qiu Yue et al. (2024-08)
    Near Pixel-Level Characterisation of Micro-Fibers in 3D Printed Cementitious Composites and Migration Mechanisms Using a Novel Iterative Method
  74. Dahlenburg Maximilian, Tan Yuan, Li Mengxue, Ajmal Moshin et al. (2024-08)
    A Flexible and Efficient Calibration Method for Discrete Element Simulations of Additive Manufacturing in Construction
  75. Huang Shuyi, Xu Weiguo, Anton Ana-Maria, Dillenburger Benjamin (2024-08)
    Self-Supporting Lamellae:
    Shape Variation Methods for the 3D Concrete Printing of Large Overhang Structures
  76. Rehman Atta, Basha Shaik, Choi Kichang, Kang Manmin et al. (2024-07)
    An Analysis of Penetrometer-Test Methods for Structural Build-Up in Stiff and Accelerated 3D Concrete Printing Mixtures
  77. Quah Tan, Tay Yi, Tan Ming, Li King (2024-07)
    Evaluation of Extrusion-Methods for 3D Concrete Printing
  78. Sando Mona, Stephan Dietmar (2024-06)
    The Development of a Fly-Ash-Based Geopolymer for Extrusion-Based 3D Printing, Along with a Printability Prediction Method
  79. Spencer Lawson, Genedy Moneeb, Strait James, Nair Sriramya et al. (2024-06)
    Concrete Gyroid:
    An Additive Manufacturing (AM) Method to 3D Print Gyroid Geometries with a Cementitious Material
  80. Yang Chao, Xu Xinglong, Lei Zuxiang, Sun Junbo et al. (2024-06)
    Enhancing Mechanical Properties of Three-Dimensional Concrete at Elevated Temperatures Through Recycled Ceramic-Powder Treatment Methods
  81. Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay, Mechtcherine Viktor (2024-06)
    In-Process Textile Reinforcement Method for 3D Concrete Printing and Its Structural Performance
  82. Gu Yucun, Khayat Kamal (2024-05)
    Extrudability Window and Off-Line Test-Methods to Predict Buildability of 3D Printing Concrete
  83. Liu Zhenbang, Li Mingyang, Wong Teck, Tan Ming (2024-05)
    Determine the Effects of Pore Properties on the Mechanical Performances of 3D Concrete Printing Units with Experimental and Numerical Methods
  84. Vargas José, Sjölander Andreas, Westerlind Helena, Silfwerbrand Johan (2024-05)
    Internal Topology-Optimization of 3D Printed Concrete Structures:
    A Method for Enhanced Performance and Material-Efficiency
  85. Lin Xinbo, Shao Yajian, Ma Guowei, Wang Li (2024-05)
    A New 3D Printing Method and Similar Materials of the Tunnel-Lining for the Geomechanical Model-Test
  86. Cheng Hanbin, Radlińska Aleksandra, Hilman Michael, Liu Feihong et al. (2024-05)
    Modeling Concrete-Deposition via 3D Printing Using Reproducing Kernel-Particle-Method
  87. Negron-McFarlane Christian, Kreiger Eric, Barna Lynette, Stynoski Peter et al. (2024-04)
    Development of In-Place Test-Methods for Evaluating Printable Concretes
  88. Latorraca Tássia, Guimarães Ana, Rangel Bárbara (2024-03)
    Bibliometric Analysis of Personalized 3D Printed Concrete-Based Modules for Construction:
    Leveraging the Ordinatio Method
  89. Curth Alexander, Pearl Natalie, Castro-Salazar Angelica, Mueller Caitlin et al. (2024-03)
    3D Printing Earth:
    Local, Circular Material Processing, Fabrication Methods, and Life Cycle Assessment
  90. Vigneshwari Are, Jayaprakash Jaganathan (2024-02)
    A Review on 3D Printable Cementitious Material Containing Copper and Iron-Ore-Tailings:
    Material-Characterization, Activation-Methods, Engineering-Properties, Durability, and Microstructure-Behavior
  91. Silva Guido, Quispe Axcel, Baldoceda Jordan, Kim Suyeon et al. (2024-02)
    Additive Construction of Concrete Deep Beams Using Low-Cost Characterization Methods and FEM-Based Topological Optimization
  92. Rehman Atta, Kim Ik-Gyeom, Kim Jung-Hoon (2024-01)
    Towards Full Automation in 3D Concrete Printing Construction:
    Development of an Automated and In-Line Test-Method for In-Situ Assessment of Structural Build-Up and Quality of Concrete
  93. Raut Jayant, Pimpalshende Anjusha, Chandak Mayuri, Patil Tejas et al. (2024-01)
    A Novel Multi-Method Framework for 3D Printed Fiber-Reinforced Polymer Concrete Utilizing Advance Additive Manufacturing Techniques
  94. Pi Yilin, Lu Cong, Yao Yiming, Li Baoshan (2024-01)
    A Rheological-Based Printability-Assessment Method for 3D Printing Engineered Cementitious Composites Considering Fiber-Dispersion
  95. Fasihi Ali, Libre Nicolas (2024-01)
    From Pumping to Deposition:
    A Comprehensive Review of Test-Methods for Characterizing Concrete-Printability
  96. Li Haodao, Addai-NImoh Alfred, Kreiger Eric, Khayat Kamal (2023-12)
    Methodology to Design Eco-Friendly Fiber-Reinforced Concrete for 3D Printing
  97. Bono Victor, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2023-12)
    Methodology for Formulating Low-Carbon Printable Mortar Through Particles-Packing-Optimization
  98. Ambily Parukutty, Kaliyavaradhan Senthil, Sebastian Shilpa, Shekar Deepadharshan (2023-12)
    Mixing Approach for 3D Printable Concrete:
    Method of Addition and Optimization of Superplasticizer Dosage
  99. Warsi Syed, Panda Biranchi, Biswas Pankaj (2023-12)
    Exploring Fiber Addition Methods and Mechanical Properties of Fiber-Reinforced 3D Printed Concrete:
    A Review
  100. Felfili Guimarães Gabriela, Oliveira Marcos, Almeida Martinelli Juliana (2023-12)
    Performance-Evaluation of the 3D Printing System Through Fault-Tree-Analysis-Method
  101. Wang Qiang-Chen, Yu Si-Nan, Chen Zi-Xiao, Weng Yiwei et al. (2023-11)
    Promoting Additive Construction in Fast-Developing Areas:
    A Q-Methodology-Analysis of Stakeholder-Perspectives on Policy-Mixes
  102. Li Huanbao, Li Zihan, Skibniewski Mirosław, Wang Liang et al. (2023-11)
    Molding-Quality-Control with Non-Linear Forming-Method in 3D Cement Printing
  103. Yang Wenwei, Wang Li, Hu Yuanyuan, Sanjayan Jay et al. (2023-10)
    An Integrated Topology-Optimization Method Including Manufacturing-Constraints for 3D Printed Fiber-Reinforced Concrete Structures
  104. Thib Raghed, Belayachi Naima, Bouarroudj Mohamed, Bulteel David et al. (2023-10)
    A Methodology for Designing 3D Printable Mortar Based on Recycled Sand
  105. Li Zhuming, Aslani Farhad (2023-10)
    Performance of 3D Printed Beams and Slabs Using Self-Sensing Cementitious Composites and DIC Method
  106. Chang Ze, Chen Yu, Schlangen Erik, Šavija Branko (2023-09)
    A Review of Methods on Buildability Quantification of Extrusion-Based 3D Concrete Printing:
    From Analytical Modelling to Numerical Simulation
  107. Zhu Lingli, Yao Jie, Zhao Yu, Ruan Wenqiang et al. (2023-09)
    Printability and Early Mechanical Properties of Material-Composition Modified 3D Printing Engineered Cementitious Composites Based on the Response-Surface-Methodology
  108. Conrad John, Spencer Lawson, Amador Robert, Linnehan Tyler et al. (2023-09)
    Concrete Printed Gyroid Column:
    A Structurally Optimized, Sand Layer Supported Printing Method
  109. Rehman Atta, Perrot Arnaud, Birru Bizu, Kim Jung-Hoon (2023-09)
    Recommendations for Quality-Control in Industrial 3D Concrete Printing Construction with Mono-Component Concrete:
    A Critical Evaluation of Ten Test-Methods and the Introduction of the Performance-Index
  110. Shahzad Qamar, Li Fangyuan (2023-09)
    An Innovative Method for Buildability-Assessment of 3D Printed Concrete at Early-Ages
  111. Soares Augusto, Costa Hugo, Carmo Ricardo, Rodrigues Ana et al. (2023-08)
    Comprehensive Design Methodology for 3D Printing Mortars
  112. Rizzieri Giacomo, Ferrara Liberato, Cremonesi Massimiliano (2023-07)
    Numerical Simulation of the Extrusion and Layer-Deposition-Processes in 3D Concrete Printing with the Particle-Finite-Element-Method
  113. Baldoceda Jordan, Silva Guido, Kim Suyeon, Ruiz Gaby et al. (2023-07)
    Preliminary Experimental Evaluation of Buildability Improvement Methods for Concrete for 3D Printing
  114. Zhang Nan, Sanjayan Jay (2023-07)
    Mechanisms of Rheological Modifiers for Quick Mixing Method in 3D Concrete Printing
  115. Sukontasukkul Piti, Maho Buchit, Komkham Sila, Pianfuengfoo Satharat et al. (2023-07)
    Precise Determination of Initial Printable Time for Cement Mortar 3D Printing Using a Derivative Method
  116. Pott Ursula, Jakob Cordula, Dorn Tobias, Stephan Dietmar (2023-07)
    Investigation of a Shotcrete-Accelerator for Targeted Control of Material-Properties for 3D Concrete Printing Injection-Method
  117. Mohiuddin Rafay, Cruz Policroniades Miranda, Slepicka Martin, Borrmann André (2023-07)
    Optical Process-Control for Extrusion-Based Additive Manufacturing-Methods in Construction
  118. Huang Shuyi, Xu Weiguo, Hu Hanyang (2023-06)
    Space-Filling and Print-Path-Generation-Methods for Large-Area 3D Concrete Printing Pavements
  119. Pott Ursula, Jakob Cordula, Wolf Julian, Stephan Dietmar (2023-06)
    Comparison of Physical and Physico-Chemical Methods for 3D Printing Application with the Focus on the Unconfined Uniaxial Compression-Test
  120. Daher Jana, Kleib Joelle, Benzerzour Mahfoud, Abriak Nor-Edine et al. (2023-06)
    The Development of Soil-Based 3D Printable Mixtures:
    A Mix-Design Methodology and a Case Study
  121. Fairbairn Eduardo, Santos Larissa, Mendoza Reales Oscar, Farias Marina et al. (2023-06)
    New Conceptions and Constructive Methods for Pumped Storage Hydropower-Plants
  122. Sergis Vasileios, Ouellet-Plamondon Claudiane (2023-06)
    An Optimum Mix-Design Method for 3D Concrete Printing Applications
  123. Zhang Sisi, Kalus Matthias, Engel Sven, Hegger Josef et al. (2023-06)
    Development of an Innovative 3D Printing Process for Reinforced Concrete:
    AMoRC Method
  124. Yang Wenwei, Wang Li, Ma Guowei, Feng Peng (2023-06)
    An Integrated Method of Topological-Optimization and Path-Design for 3D Concrete Printing
  125. Pietras Daniel, Zbyszyński Wojciech, Sadowski Tomasz (2023-06)
    A 3D Printing Method of Cement-Based FGM Composites Containing Granulated Cork, Polypropylene Fibers, and a Polyethylene Net Inter-Layer
  126. Leschok Matthias, Cheibas Ina, Piccioni Valeria, Seshadri Bharath et al. (2023-05)
    3D Printing Facades:
    Design, Fabrication, and Assessment Methods
  127. Hanifa Mohamad, Figueiredo Bruno, Mendonça Paulo (2023-04)
    Additive Manufacturing Earth-Based Composite:
    Strategical and Computational Methodology for Building-Shell-Geometries
  128. Delavar Mohammad, Chen Hao, Sideris Petros (2023-04)
    Seismic Design Methodology for 3D Printed Concrete Buildings
  129. Dey Dhrutiman, Sahu Akshay, Prakash Srajan, Panda Biranchi (2023-03)
    A Study into the Effect of Material-Deposition-Methods on Hardened Properties of 3D Printed Concrete
  130. Markin Slava, Mechtcherine Viktor (2023-01)
    Methods for Measuring Plastic Shrinkage and Related Cracking of 3D Printed Concrete
  131. Malipeddi Reshma, Adiseshu S. (2023-01)
    Impact of Unique Mixing Methodology on Macro and Microstructural Characteristics of Concrete Containing Slag and Fly-Ash
  132. Xia Lingwei, Bi Minghao, Wu Jie, Wang Fang et al. (2023-01)
    Integrated Lightweight Design-Method via Structural Optimization and Path-Planning for Material-Extrusion
  133. Rückrich Stefanie, Agranati Galit, Grobman Yasha (2022-12)
    Earth-Based Additive Manufacturing:
    A Field-Oriented Methodology for Evaluating Material-Printability
  134. Deng Zhicong, Jia Zijian, Zhang Chao, Wang Zhibin et al. (2022-10)
    3D Printing Lightweight Aggregate Concrete Prepared with Shell-Packing-Aggregate Method:
    Printability, Mechanical Properties and Pore-Structure
  135. Rensburg Johannes, Babafemi Adewumi, Combrinck Riaan (2022-09)
    A Textile Reinforcement Method for 3D Printed Concrete
  136. Kalthoff Matthias, Raupach Michael, Matschei Thomas (2022-09)
    Investigation of Rheological Test-Methods for the Suitability of Mortars for Manufacturing of Textile-Reinforced Concrete Using a Laboratory Mortar-Extruder:
    LabMorTex
  137. Liu Bing, Liu Xiaoyan, Li Guangtao, Geng Songyuan et al. (2022-09)
    Study on Anisotropy of 3D Printing PVA-Fiber-Reinforced Concrete Using Destructive and Non-Destructive Testing Methods
  138. Bong Shin, Nematollahi Behzad, Nerella Venkatesh, Mechtcherine Viktor (2022-09)
    Method of Formulating 3D Printable Strain-Hardening Alkali-Activated Composites for Additive Construction
  139. Mortada Youssef, Mohammad Malek, Mansoor Bilal, Grasley Zachary et al. (2022-09)
    Development of Test-Methods to Evaluate the Printability of Concrete Materials for Additive Manufacturing
  140. Engelhard Michael, Kalytta-Mewesand Andreas, Volkmer Dirk (2022-09)
    Testing Methods for Deformation Characterization on 3D Printed Carbon Fiber-Reinforced Cementitious Composites
  141. Kaliyavaradhan Senthil, Ambily Parukutty, Prem Prabhat, Ghodke Swapnil (2022-08)
    Test-Methods for 3D Printable Concrete
  142. Sergis Vasileios, Ouellet-Plamondon Claudiane (2022-07)
    Automating Mix-Design for 3D Concrete Printing Using Optimization Methods
  143. Pain Suzi, Choo Ee, Bartov Nitsan, Young Jack (2022-07)
    How to Dress a Column:
    An Architect's Method for Designing with 3D Printed Clay
  144. Anton Ana-Maria, Reiter Lex, Skevaki Eleni, Dillenburger Benjamin (2022-07)
    Reinforcement Lattices for 3DCP:
    A Fabrication Method Based on Ruled Surfaces
  145. Krenzer Knut, Palzer Ulrich, Müller Steffen, Mechtcherine Viktor (2022-06)
    Simulation of 3D Concrete Printing Using Discrete Element Method
  146. Kolawole John, Becker Daniel, Xu Jie, Dobrzanski James et al. (2022-06)
    Selected Test-Methods for Assessing Fresh and Plastic-State 3D Concrete Printing-Materials
  147. Sitnikov Vasily, Kitani Lena, Maneka Artemis, Lloret-Fritschi Ena et al. (2022-06)
    Design and Fabrication of Spatially Graded Concrete Elements with Ice Aggregate Method
  148. Stieler David, Schwinn Tobias, Menges Achim (2022-04)
    Additive Formwork in Pre-Cast Construction:
    Agent-Based Methods for Fabrication-Aware Modularization of Concrete Building Elements
  149. Kazadi Billy, Yao Liang, Wang Li (2022-04)
    In-Process Reinforcement Method for 3D Concrete Printing:
    Status, Potentials and Challenges
  150. Chen Yu, Chang Ze, He Shan, Çopuroğlu Oğuzhan et al. (2022-04)
    Effect of Curing Methods During a Long Time-Gap Between Two Printing Sessions on the Inter-Layer Bonding of 3D Printed Cementitious Materials
  151. Ivanova Irina, Ivaniuk Egor, Bisetti Sameercharan, Nerella Venkatesh et al. (2022-03)
    Comparison Between Methods for Indirect Assessment of Buildability in Fresh 3D Printed Mortar and Concrete
  152. Mechtcherine Viktor, Taubert Markus, Müller Steffen, Will Frank et al. (2022-03)
    Additive Manufacturing of Monolithic, Steel-Reinforced Concrete Walls Using CONPrint3D-Reinforced Methods
  153. Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2022-02)
    Extrusion-Process-Simulation and Layer-Shape-Prediction During 3D Concrete Printing Using the Particle-Finite-Element-Method
  154. Shao Lijing, Feng Pan, Zuo Wenqiang, Wang Haochuan et al. (2022-02)
    A Novel Method for Improving the Printability of Cement-Based Materials:
    Controlling the Releasing of Capsules Containing Chemical Admixtures
  155. Ahmed Sara, Yehia Sherif (2022-02)
    Evaluation of Workability and Structuration-Rate of Locally Developed 3D Printing Concrete Using Conventional Methods
  156. Feys Dimitri, Schutter Geert, Fataei Shirin, Martys Nicos et al. (2022-01)
    Pumping of Concrete:
    Understanding a Common Placement Method with Lots of Challenges
  157. Bakar Muhammad, Saude Nasuha, Ibrahim Mustaffa, Ismail Nur (2022-01)
    Additive Manufacturing:
    A Review of Current 3D Concrete Printing on Materials, Methods, Applications, Properties and Challenges
  158. Kompella Sriram, Monte Francesco, Cucchi Marco, Marcucci Andrea et al. (2021-12)
    A Methodology to Assess Early-Age Fracture Performance of 3D Printable Cementitious Mixes
  159. Moini Mohamadreza, Olek Jan, Zavattieri Pablo, Youngblood Jeffrey (2021-12)
    Open-Span Printing Method for Assessment of Early-Age Deformations of Additively Manufactured Cement-Based Materials Using an Isosceles Triangle
  160. Xu Zhisong, Li Zhuguo, Jiang Fei (2021-11)
    Numerical Approach to Pipe Flow of Fresh Concrete Based on MPS Method
  161. Yuan Philip, Zhan Qiang, Wu Hao, Beh Hooi et al. (2021-11)
    Real-Time Tool-Path-Planning and Extrusion-Control-Method for Variable-Width 3D Concrete Printing
  162. Rutzen Matthias, Schulz Michael, Moosburger-Will Judith, Lauff Philipp et al. (2021-11)
    3D Printing as an Automated Manufacturing Method for a Carbon-Fiber-Reinforced Cementitious Composite with Outstanding Flexural Strength (105 N/mm²)
  163. Chen Yu, He Shan, Gan Yidong, Çopuroğlu Oğuzhan et al. (2021-11)
    A Review of Printing-Strategies, Sustainable Cementitious Materials and Characterization Methods in the Context of Extrusion-Based 3D Concrete Printing
  164. Lindner Marco, Scharf‐Wildenhain Ronny, Gliniorz Ralf, Vanselow Konrad et al. (2021-09)
    Calibration Method for Constant Strands of Material with Robotassisted Concrete Extrusion
  165. Kwon Seung, Jang Kyong, Lee Jung (2021-09)
    External Injection Method for Improvement of Concrete Pumpability
  166. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2021-08)
    In-Process Reinforcing Method:
    Dual 3D Printing Procedure for Ultra-High-Performance Concrete Reinforced Cementitious Composites
  167. Perrot Arnaud, Pierre Alexandre, Nerella Venkatesh, Wolfs Robert et al. (2021-07)
    From Analytical Methods to Numerical Simulations:
    A Process Engineering Toolbox for 3D Concrete Printing
  168. Nair Sooraj, Panda Subhashree, Tripathi Avinaya, Neithalath Narayanan (2021-06)
    Relating Print-Velocity and Extrusion-Characteristics of 3D Printable Cementitious Binders:
    Implications Towards Testing Methods
  169. Prasittisopin Lapyote, Sakdanaraseth Thanut, Horayangkura Vimolsiddhi (2021-06)
    Design and Construction Method of a 3D Concrete Printing Self-Supporting Curvi-Linear Pavilion
  170. Li Hui, Meng Huamin, Lan Mingzhang, Zhou Jian et al. (2021-05)
    Development of a Novel Material and Casting-Method for In-Situ Construction on Mars
  171. Pott Ursula, Stephan Dietmar (2021-04)
    Penetration-Test as a Fast Method to Determine Yield-Stress and Structural Build-Up for 3D Printing of Cementitious Materials
  172. Bos Freek, Kruger Jacques, Lucas Sandra, Zijl Gideon (2021-04)
    Juxtaposing Fresh Material-Characterisation-Methods for Buildability-Assessment of 3D Printable Cementitious Mortars
  173. Marchment Taylor, Sanjayan Jay (2021-04)
    Reinforcement Method for 3D Concrete Printing Using Paste-Coated Bar Penetrations
  174. Canou Joseph, Uhart Maylis, Diaz Pierre (2021-02)
    A “Low-Cost” Subtractive Method for Freshly Finished 3D Concrete Printed Structures
  175. Liu Miao, Zhang Qiyun, Tan Zhendong, Wang Li et al. (2021-01)
    Investigation of Steel-Wire-Mesh-Reinforcement Method for 3D Concrete Printing
  176. Xu Jiabin, Chen Mingxu, Zhao Zhihui, Li Laibo et al. (2021-01)
    Printability and Efflorescence-Control of Admixtures-Modified 3D Printed White Portland-Cement-Based Materials Based on the Response-Surface-Methodology
  177. Wu Weiwei, Wang Zhongyu, Ding Shuang, Song Aiping (2021-01)
    Effect Research of Cement Block on Paste-Flow for 3D Cement Printing Based on an Improved Lattice-Boltzmann Method
  178. Kristombu Baduge Shanaka, Navaratnam Satheeskumar, Zidan Yousef, McCormack Tom et al. (2021-01)
    Improving Performance of Additive Manufactured Concrete:
    A Review on Material Mix-Design, Processing, Inter-Layer Bonding, and Reinforcing-Methods
  179. Mohammad Malek, Masad Eyad, Ghamdi Sami (2020-12)
    3D Concrete Printing Sustainability:
    A Comparative Life Cycle Assessment of Four Construction Method Scenarios
  180. Singh P., Sreerag K. (2020-12)
    Additive Manufacturing Through Digital Concrete by Extrusion- and Non-Extrusion-Method
  181. Dubov Alexey, Ruben Sam (2020-11)
    Material Development Standards and Methods for Additive Manufacturing in Construction to Meet Building Code Requirements for Certification
  182. Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2020-11)
    Additive Manufacturing of Cementitious Materials by Selective Paste-Intrusion:
    Numerical Modeling of the Flow Using a 2D-Axisymmetric Phase-Field-Method
  183. Maboudi Mehdi, Gerke Markus, Hack Norman, Brohmann Leon et al. (2020-08)
    Current Surveying Methods for the Integration of Additive Manufacturing in the Construction Process
  184. Claßen Martin, Claßen Johannes, Sharma Rahul (2020-08)
    Conception of a Real World 3D Printing Method for Reinforced Concrete (AMoRC)
  185. Nething Christoph, Smirnova Maya, Gröning Janosch, Haase Walter et al. (2020-08)
    A Method for 3D Printing Bio-Cemented Spatial Structures Using Sand and Urease-Active-Calcium-Carbonate-Powder
  186. Marchment Taylor, Sanjayan Jay (2020-07)
    Penetration Reinforcing Method for 3D Concrete Printing
  187. Weger Daniel, Baier Daniel, Straßer Alexander, Prottung Sophia et al. (2020-07)
    Reinforced Particle-Bed Printing by Combination of the Selective Paste-Intrusion Method with Wire and Arc Additive Manufacturing:
    A First Feasibility Study
  188. Buswell Richard, Kinnell Peter, Xu Jie, Hack Norman et al. (2020-07)
    Inspection Methods for 3D Concrete Printing
  189. Heever Marchant, Bester Frederick, Pourbehi Mohammad, Kruger Jacques et al. (2020-07)
    Characterizing the Fissility of 3D Concrete Printed Elements via the Cohesive Zone Method
  190. Wan Qian, Wang Li, Ma Guowei (2020-07)
    Adaptable Tool-Path-Planning Method for 3D Concrete Printing Based on the Mapping Method
  191. Federowicz Karol, Kaszyńska Maria, Zieliński Adam, Hoffmann Marcin (2020-06)
    Effect of Curing Methods on Shrinkage Development in 3D Printed Concrete
  192. Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2020-05)
    Effectiveness of the Rheometric Methods to Evaluate the Build-Up of Cementitious Mortars Used for 3D Printing
  193. Cohen Zach, Carlson Nicholas (2020-05)
    Piling and Pressing:
    Towards a Method of 3D Printing Reinforced Concrete Columns
  194. Torelli Giacomo, Fernández Mar, Lees Janet (2020-02)
    Functionally Graded Concrete:
    Design Objectives, Production Techniques and Analysis Methods for Layered and Continuously Graded Elements
  195. Akulova I., Slavcheva Galina (2020-02)
    Methodical Approach to Calculation of the Maintenance Cost for 3D Built Printing Equipment
  196. Baz Bilal, Aouad Georges, Rémond Sébastien (2020-01)
    Effect of the Printing Method and Mortar’s Workability on Pull-Out Strength of 3D Printed Elements
  197. Korniejenko Kinga, Łach Michał, Chou S., Lin Wei-Ting et al. (2019-11)
    A Comparative Study of Mechanical Properties of Fly-Ash-Based Geopolymer Made by Casted and 3D Printing Methods
  198. Marchment Taylor, Sanjayan Jay (2019-10)
    Mesh Reinforcing Method for 3D Concrete Printing
  199. Paolini Alexander, Kollmannsberger Stefan, Rank Ernst (2019-10)
    Additive Manufacturing in Construction:
    A Review on Processes, Applications, and Digital Planning Methods
  200. Yuan Qiang, Li Zemin, Zhou Dajun, Huang Tingjie et al. (2019-08)
    A Feasible Method for Measuring the Buildability of Fresh 3D Printing Mortar
  201. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-07)
    Post-processing Methods to Improve Strength of Particle-Bed 3D Printed Geopolymer for Digital Construction Applications
  202. Hirayama Yuta, Zhang Jiali, Kawahara Yoshihiro (2019-06)
    A Method to Evaluate the Formability and Fluidity of Concrete-Based Materials for 3D Printing
  203. Hamidi Fatemeh, Aslani Farhad (2019-05)
    Additive Manufacturing of Cementitious Composites:
    Materials, Methods, Potentials, and Challenge
  204. Valle‐Pello P., Álvarez‐Rabanal Felipe, Alonso‐Martínez M., Coz Díaz J. (2019-05)
    Numerical Study of the Interfaces of 3D Printed Concrete Using Discrete Element Method
  205. Bong Shin, Nematollahi Behzad, Nazari Ali, Xia Ming et al. (2019-03)
    Method of Optimization for Ambient Temperature Cured Sustainable Geopolymers for 3D Printing Construction Applications
  206. Hosseini Ehsan, Zakertabrizi Mohammad, Korayem Asghar, Xu Guanzhong (2019-03)
    A Novel Method to Enhance the Inter-Layer Bonding of 3D Printing Concrete:
    An Experimental and Computational Investigation
  207. Marchment Taylor, Sanjayan Jay, Xia Ming (2019-03)
    Method of Enhancing Inter-Layer Bond Strength in Construction-Scale 3D Printing with Mortar by Effective Bond Area Amplification
  208. Li Zhijian, Wang Li, Ma Guowei (2019-02)
    Method for the Enhancement of Buildability and Bending-Resistance of Three-Dimensional-Printable Tailing Mortar
  209. Rahul Attupurathu, Santhanam Manu, Meena Hitesh, Ghani Zimam (2018-12)
    3D Printable Concrete:
    Mixture-Design and Test-Methods
  210. Huang Tiancheng, Gu Hai, Zhang Jie, Li Bin et al. (2018-11)
    An Improved Multi-Relaxation Time Lattice Boltzmann Method for the Non-Newtonian Influence of the Yielding Fluid Flow in Cement-3D Printing
  211. Marchment Taylor, Sanjayan Jay (2018-09)
    Method of Enhancing Inter-Layer Bond Strength in 3D Concrete Printing
  212. Hu Chang’an, Du Wenbo (2018-08)
    Research on the Method for Improving Mechanical Properties of Sand-Mold-Based on 3D Printing Process
  213. Yang Hongxiong, Chung Jacky, Chen Yuhong, Li Yijia (2018-06)
    The Cost Calculation Method of Construction 3D Printing Aligned with Internet of Things
  214. Li Zhijian, Wang Li, Ma Guowei (2018-05)
    Method for the Enhancement of Buildability and Bending-Resistance of 3D Printable Tailing Mortar
  215. Ngo Tuan, Kashani Alireza, Imbalzano Gabriele, Nguyen Quynh et al. (2018-02)
    Additive Manufacturing (3D Printing):
    A Review of Materials, Methods, Applications and Challenges
  216. Tomé Ana, Vizotto Isaías, Valença Jónatas, Júlio Eduardo (2018-02)
    Innovative Method for Automatic Shape-Generation and 3D Printing of Reduced-Scale Models of Ultra-Thin Concrete Shells
  217. Kajzr Daniel, Beran Leoš, Záda Václav (2017-10)
    Development of a Robotic Arm Suitable for Demonstration of Advanced Control Methods
  218. Herrmann Michael, Sobek Werner (2015-10)
    Functionally Graded Concrete:
    Numerical Design Methods and Experimental Studies on Mass Minimized Components
  219. Krause Martin, Otto Jens, Bulgakov Alexey, Sayfeddine Daher (2015-07)
    Strategic Optimization of 3D Concrete Printing Using the Method of CONPrint3D®
  220. Mechtcherine Viktor, Gram Annika, Krenzer Knut, Schwabe Jörg-Henry et al. (2014-03)
    Simulation of Fresh Concrete Flow Using Discrete Element Method (DEM)
  221. Vasilić Ksenija, Geiker Mette, Hattel Jesper, Martinie Laetitia et al. (2014-03)
    Advanced Methods and Future Perspectives