Skip to content

#composite

Keywords by Co - Occurrence

  1. Chourasia Ajay, Pal Biswajit, Kapoor Ashish, Kumar R. (2026-04)
    Influence of Mix Constituents on the Printability and Compressive Strength of Binary and Ternary Cementitious Composite Made of Agro-Industrial Waste
  2. Lyu Qifeng, Luo Zhenhua, Sun Yuting, Du Qianyi et al. (2026-04)
    Improved Energy Storage of Dual-Concrete Composite Cavity-Structure Supercapacitor Fabricated via Mortar-Extrusion 3D Printing
  3. Cadenazzi Thomas, Liu Kaimiao, Keles Busra (2026-04)
    Performance Evaluation of Novel 3D Printed Hemp-PLA Composites for Sustainable Concrete Reinforcement
  4. Wu Yiwen, Liu Chao, Liu Huawei, Pan Zhihong et al. (2026-03)
    Multiscale Mechanistic Insights into the Dual Effect of Interlayer Reinforcement on the Shear Behavior of 3D-Printed Concrete Composite Walls
  5. Li Shiping, Sun Yan, Zhang Daxu, Chen Wujun et al. (2026-03)
    Bio-Inspired Bouligand Architectures Enable Biaxial Toughening and Programmable Energy Dissipation in 3D-Printed Strain-Hardening Cementitious Composites
  6. Lasquite N., Ramos M., Alfeche F., Mendija L. et al. (2026-03)
    Novel Efficient-Inexpensive Development of Hydrophobic 3D-Printed Mortar Composite for Moisture Prevention Multi-Application
  7. Katlav Metin, Turk Kazim (2026-03)
    Explainable Hybrid Machine Learning Approach for Mechanical Performance of 3D-Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
  8. Jin Yuan, Sun Zhaoyang, Chen Mingxu, Zhou Xiangming et al. (2026-03)
    Predicting the Printability of Cementitious Composites in 3D Printing:
    Relevance Between Rheological Protocols and Structural Deformation
  9. Krishnaraja A., Kulanthaivel P., Manoharan Arunkumar, Muthusamy Suresh et al. (2026-03)
    Engineered Cementitious Composites with Nano Calcium Carbonate and Corona Waste Mask Fibers for Sustainable 3D Printing Applications
  10. Yousaf Arslan, Koç Muammer (2026-03)
    Bio-Inspired 4D Printing of Earthen Soil Composites for Structural Living Wall Applications
  11. Kim J.-S., Yoo C., Yang Y. (2026-03)
    Microstructural Characterization and Bonding Performance Evaluation of 3D-Printed Concrete-Mortar Composites
  12. Hu Zhiheng, Elchalakani Mohamed, Ayough Pouria, Yang Bo et al. (2026-03)
    Determination of Tensile Strength and Fracture Toughness of 3D-Printed Ultra-Lightweight Engineered Cementitious Composites Reinforced with Fibre-Reinforced Polymer Mesh
  13. Ashok Tanshette Akash, Faisal Zoheb, Huang Jianxin, Puppala Anand (2026-03)
    Durability Evaluation of Soil-Geopolymer Based Composites for 3D Printing Applications in Geotechnical Engineering
  14. Nguyen Vuong, Jie Cheah, Lao Junying, Huanyu Zhao et al. (2026-02)
    Experimental and Multi-Scale Modelling Investigation of Printable, Low-Cement Engineered Cementitious Composites with Different Polyethene Fiber Contents
  15. Zhang Xiaoyue, Chen Zhengren, Zhou Xinting, Li Zheng et al. (2026-02)
    Experimental and Finite Element Studies of 3D-Printed Concrete-Glued Laminated Timber Composite Beams
  16. Zhang Tong, Wei Jinhui, Chen Meng, Yu Kanghao (2026-02)
    Experimental Characterization and Theoretical Modeling of the Bonding Behavior Between FRP Bars and 3D Printed Strain-Hardening Cementitious Composites
  17. Caron Jean-François, Ducoulombier Nicolas, Demont Léo, Bono Victor et al. (2026-02)
    Using 3D Printing for a New Cementitious Composite and Structural Design
  18. Wang Huai, Xu Jingjie, Gong Hao, Wang Peijun et al. (2026-01)
    Behavior of Hollow Glass Microsphere Aggregate Concrete Composite Short Columns with 3D-Printed Permanent Formwork Under Axial Load
  19. Hu Zhiheng, Elchalakani Mohamed, Ran Hongyu, Yang Bo (2026-01)
    Multifunctional 3D-Printed Ultra-Lightweight Engineered Cementitious Composites:
    Mechanical Properties and Self-Sensing Function
  20. Mudi Charitha, Gupta Souradeep, Basithali E. (2026-01)
    Influence of Engineered Natural Fiber Reinforcement in 3D Printed Earth-Based Cementitious Composites:
    Fresh and Hardened Properties
  21. Nguyen Vuong, Jie Cheah, Lao Junying, Huanyu Zhao et al. (2026-01)
    Performance of Lightweight, Reinforced, and Assemblable 3D-Printed Concrete Columns with Low-Carbon Engineered Cementitious Composites
  22. Cziráki Bálint, Kámán András, Boros Adrienn, Korim Tamás et al. (2026-01)
    Design and Implementation of a Composite Printing Machine
  23. Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2026-01)
    Enhancing Fiber Alignment and Tensile Properties of 3D-Printed Ultra-High Performance Strain-Hardening Cementitious Composites by Nozzle Channel Design
  24. Tinoco Matheus, Márquez Álvaro, Ramallo Laura, Barluenga Gonzalo et al. (2026-01)
    Effect of Cellulose Microfibers on Rheological Properties and Printability of 3D Printable Cement-Based Composites
  25. Zhang Xiaoyue, Chen Zhengren, Zhou Xinting, Li Zheng et al. (2026-01)
    Experimental Investigation on the Mechanical Performance of 3D-Printed Concrete-Glued Laminated Timber Composite Beams
  26. Liang Xiangzhou, Li Jinqian, Li Ziwei, Wang Qiang (2025-12)
    Experimental and Analytical Investigation of the Shear Behavior of the Developed BFRP Reinforced 3D Printed Composite Beams with U-Shaped Seawater Sea-Sand ECC Formwork
  27. Eisazadeh Hamid, Chatroudi Narges, Alizadeh Roozbeh (2025-12)
    AI-Based Prediction and Numerical Analysis of Mechanical and Microstructural Parameters of Carbon Fiber Reinforced 3D Printed Composites
  28. Bang Jin, Ha Seong, Jun Yubin, Yim Hong (2025-12)
    Optimal Casting Window Defined by Electrical Resistivity for Enhancing Interfacial Bond Strength in 3D Printed-Cast Concrete Composites
  29. Basith Mydeen Pitchai Mohamed Abdul (2025-12)
    Polymer-Enhanced Composites for 3D Concrete Printing:
    A Review of Materials, Processes, and Performance
  30. Ferrari Lucia, Rizzieri Giacomo, Ferrara Liberato, Franzoni Elisa (2025-12)
    Rheological Control of Cementitious Composites Incorporating Ceramic Wastes for 3D Printing Applications
  31. Zhang Genbao, Chen Lingke, Liu Miao, Morsy Amr et al. (2025-12)
    Enhancing the Shear Properties of U-Shaped Steel Wire Mesh Reinforced 3D Printed Composites
  32. Baharlou Ehsan, Datta Ipsita, Ozbulut Osman (2025-12)
    Feasibility of 3D Printing Oyster Shell Waste Laden Hydrogel Inks for Developing Mycelium Composite in Architectural Materials
  33. Sando Mona, Alves Santos Sara, Worms Paul, Gurlo Aleksander et al. (2025-12)
    Evaluation of Continuous Epoxy-Impregnated Carbon Fiber Reinforcement in a 3D-Printable Geopolymer Composite
  34. Cao Jing, Yang Xiaojie, Shi Yaming, Yang Yi et al. (2025-12)
    Numerical Analysis of Mechanical Properties of Steel Fiber Composite Cement Mortar Considering Non-Uniformity in 3D Printing.
  35. Cheng Jianhua, Chen Meng, Ge Yulin, Zhang Tong (2025-12)
    Mechanical Behavior and Damage Evolution of 3D-Printed Engineered Cementitious Composites at Elevated Temperatures:
    Insights from Acoustic Emission Characterization
  36. Xu Fengming, Yu Jie, Teng Fei, Lin Xiaoshan et al. (2025-12)
    Application of Recycled Tile as Internal Curing Material in 3D-Printed Engineered Cementitious Composites
  37. Cheng Zhangqi, Li Keyan, Liu Renlong (2025-12)
    Sustainable 3D Printed Engineered Cementitious Composites Incorporating Recycled Ceramic Materials:
    Rheology and Mechanical Behavior
  38. Ramezani Mahyar, Kilic Ugur, Sherif Muhammad, Arce Gabriel et al. (2025-12)
    Rheological Properties and Mechanical Response of Bio-Based Graphene Enhanced Additively Manufactured Cementitious Composites
  39. Luo Xiaoyu, Zhao Yuqi, Yang Min, Yao Xiaofei et al. (2025-12)
    Introducing Cement Composite Agents During Printing Process to Enhance the 3D-Printed Concrete Interfaces Between Layers and Filaments
  40. Feng Hu, Yuan Xiang, Yu Zhenyu, Guo Aofei et al. (2025-12)
    Printability and Rheological Properties of 3D Printing Ultra-High Ductility Magnesium Phosphate Cement-Based Composites
  41. Tulliani Jean-Marc (2025-11)
    Latest Developments in 3D-Printed Engineered Cementitious Composites:
    Technologies, Prospects, and Challenges
  42. Bawab Jad, Dieb Amr, Hassan Hilal (2025-11)
    Preliminary Investigation into the Development of Cement-Free Composites Using Emerging Alternatives for 3D Printing
  43. Raza Ali, Tan Binglin, Jiajia Zhou, Umar Muhammad et al. (2025-11)
    Evaluation of Mechanical and Microstructural Properties of Sustainable 3D-Printed Engineered Cementitious Composites Incorporating Hybrid PE/PVA Fibers and Yellow River Sand
  44. Tang Can, Zhou Yujie, Mehmood Awais, Rania Chlihi et al. (2025-11)
    A Novel 3D-Printed Negative Poisson's Ratio Grid-Reinforced Cement-Based Composite Wall Structure:
    Design, Fabrication, and Compressive Properties
  45. Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-11)
    Multi-Scale Analysis of 3D Printable High-Strength Engineered Cementitious Composite with Carbon and Polyethylene Fibers:
    Rheology, Printability and Hydration Kinetics in Structural Components
  46. Li Shiping, Sun Yan, Qian Ye, Chen Wujun et al. (2025-11)
    Bio-Inspired Jigsaw-Interlocking Suture Interfaces for Enhanced Flexural Response of 3D-Printed Strain-Hardening Cementitious Composites
  47. Sun Yan, Du Guoqiang, Mudasir Maryam (2025-11)
    Rheological Investigations of Fresh Fiber-Reinforced Cementitious Composites Using Hydrophobic / Hydrophilic UHMWPE Fibers for 3D Concrete Printing Evaluation
  48. Khalid Lawand, Mermerdaş Kasım, Ekmen Şevin, Khidhir Bzeni Dillshad (2025-11)
    Optimization of Fresh and Hardened Properties of Fiber-Reinforced 3D Printed Geopolymer Composites Using Response Surface Methodology:
    A Data-Driven Approach Based on Prior Experimental Studies
  49. Chen Wenguang, Yu Jie, Ye Junhong, Yu Jiangtao et al. (2025-11)
    3D Printed High-Performance Fiber-Reinforced Cementitious Composites:
    Fresh, Mechanical, and Microstructural Properties
  50. Bakr Somahi, Cruz Marcos, Mayor-Luque Ricardo (2025-10)
    Cura Salad:
    Robotic Heated Spatial 3D Printing of Salt-Clay Composites for Health-Oriented Vernacular Architecture
  51. Cheng Zhangqi, Zhou Lu, Jia Xiangxi, Liu Renlong (2025-10)
    Experimental Study on Crack Development and Fracture Performance of 3D Printed Green Engineered Cementitious Composites
  52. Gajjar Parth, Gajjar T., Tangirala Aniruddha, Shrestha Ajad (2025-10)
    Advancing 3D Printing in Construction:
    Rheological Behaviors of Cementitious Composites with Supplementary Materials
  53. Wang Yuting, Chen Meng, Zhang Tong, Zhang Mingzhong (2025-10)
    Influence of Limestone Calcined Clay on the Mechanical Behaviour of 3D Printed Engineered Cementitious Composites
  54. Raza Ali, Yuan Chengfang (2025-10)
    Degradation Mechanisms and Microstructural Performance of 3D-Printed Engineered Cementitious Composites with Yellow River Sand Under Chloride Ion Wet-Dry Cycles
  55. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa (2025-10)
    Next-Generation Net-Zero Composite for Underwater 3D Printing Construction:
    Hybrid Machine Learning Optimized LC3 with Recycled Rubber
  56. Maierdan Yierfan, Armistead Samuel, Seshadri Akul, Carcassi Olga et al. (2025-10)
    Locust Bean Gum–Stabilized Kaolin-Rich Earthen Composites:
    From On-Land to Underwater 3D Printing
  57. Teng Fei, Yang Minxin, Yu Jie, Weng Yiwei et al. (2025-10)
    Multi-Material 3D Concrete Printing:
    Automated Hybrid Reinforcements Using Textile and Strain-Hardening Cementitious Composites
  58. Delavar Mohammad, Aslani Farhad, Sercombe Tim (2025-10)
    Cracking Behaviour in 3D Concrete Printed Fiber-Reinforced Cementitious Composites:
    A Review
  59. Li Haodao, Khayat Kamal (2025-10)
    Performance-Based Design of 3D Printable Cement Composite Using Locally Available Materials
  60. Rahman Mahfuzur, An Dong, Rawat Sanket, Yang Richard et al. (2025-09)
    Development of Green 3D Printable Cementitious Composites Using Multi-Response Optimisation Method
  61. Liu Han, Sousa Israel, Laflamme Simon, Doyle Shelby et al. (2025-09)
    Embedment of 3D Printed Self-Sensing Composites for Smart Cementitious Components
  62. Zhang Junyi, Zhang Chao, Zhang Yuying, Li Muduo et al. (2025-09)
    Designing Printable Cement Composites with Porous Biochar Using an Extended Water Film Thickness Theory
  63. Rudziewicz Magdalena, Maroszek Marcin, Hebda Marek (2025-09)
    Comparison of Porosity and Thermal Conductivity of Concrete and Alkali-Activated Hybrid Binders in 3D-Printed Fiber-Reinforced Foamed Composites
  64. Sun Yan, Mudasir Maryam (2025-09)
    3D Printing Performance of Strain-Hardening Cementitious Composites with Different UHMWPE Fibers in Correlation with Rheology
  65. Nasr Ahmed, Wang Jiyuan, Duan Zhenhua, Deng Qi et al. (2025-09)
    Assessing the Visibility and Impact of Recycled High-Density Polyethylene Fibers in 3D-Printed Cementitious Composites
  66. Du Guoqiang, Deng Xiaowei, Qian Ye (2025-09)
    Biomimetic 3D Printed Herringbone-Bouligand Cementitious Composites for Ultra-High Impact Performance
  67. Chen Wenguang, Liang Long, Ye Junhong, Liu Lingfei et al. (2025-09)
    Machine Learning-Enabled Performance-Based Design of Three-Dimensional Printed Engineered Cementitious Composites
  68. Bai Gang, Wang Li, Li Zhijian, Qu Yao et al. (2025-09)
    Integrating Prestress into 3D Printed Ultra-High Performance Concrete Composite Beams for Superior Flexural Performance
  69. Jankovský Ondřej, Lodňánek Petr, Lauermannová Anna-Marie, Jiříčková Adéla et al. (2025-08)
    Use of Ladle Furnace Slag as Filler Replacement in Magnesium Oxychloride Cement:
    Towards Sustainable 3D-Printable Building Composites
  70. Zhang Yifan, Aslani Farhad (2025-08)
    Mechanical and Ultrasonic Pulse Velocity Performance of 3D Printed Rubberised Cementitious Composites Reinforced with PVA Fibers
  71. Li Shiping, Sun Yan, Qian Ye, Chen Wujun et al. (2025-08)
    Bio-Inspired Bouligand Architectures for Enhanced Flexural Performance in 3D-Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
  72. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa (2025-08)
    Transformative Low-Carbon 3D-Printed Infrastructure:
    Machine Learning-Driven Self-Sensing and Self-Heating Limestone Calcined Clay Cement (LC3) Composites
  73. Khan Hilal, Zahid Zamil, Hussain Fazal, Ahmad Junaid et al. (2025-08)
    Sustainable Multifunctional Biochar-Based Cementitious Composites for Carbon Sequestration, Energy Storage, and Smart Infrastructure Applications:
    A Review
  74. Ding Shengxuan, Li Jiren, Wang Mingqiang (2025-07)
    Study on Mechanical Properties of Composite Basalt Fiber 3D-Printed Concrete Based on 3D Meso-Structure
  75. Joshi Arpan, Gaspar Florindo, Archbold Paul, Silvestre José (2025-07)
    Study on the Composition of Mortars Based on Forest Biomass Fly Ash for Sustainable 3D Printing
  76. Lu Chenyu, Sun Dongpu, Shen Qiang, Zhang Zhigang et al. (2025-07)
    Buildability of 3D Printing Engineered Cementitious Composites (ECC):
    A Comprehensive Assessment Framework Under Laboratory Conditions
  77. Balina Karina, Gailitis Rihards, Šinka Māris, Argalis Pauls et al. (2025-07)
    Prospective LCA for 3D-Printed Foamed Geopolymer Composites Using Construction Waste as Additives
  78. Zafar Tayyab, Zafar Muhammad, Hojati Maryam (2025-07)
    Exploring the 3D Printability of Engineered Cementitious Composites with Internal Curing for Resilient Construction in Arid Regions
  79. Nandurkar Bhupesh, Raut Jayant, Hinge Pawan, Bahoria Boskey et al. (2025-06)
    Multi-Scale Deep Learning Framework for Three Dimensional Printed Self-Sensing Cementitious Composites with Hybrid Nano-Carbon Fillers
  80. Rousan Rajai, Alnemrawi Bara'a, Abdalla Khairedin, Alhassan Mohammad et al. (2025-06)
    The Flexural Behavior of Engineered Cementitious Composites (ECC) One-Way 3D Printed Slabs Made of Solid and Hollow Sections
  81. Srinivas Dodda, Panda Biranchi, Suraneni Prannoy, Sitharam Thallak (2025-06)
    Mix Design Optimization of 3D-Printed Cementitious Composites for Marine Applications:
    Impact of Binder Composition, Accelerated Carbonation, and PVA Fibers on Strength and Durability
  82. Gasmi Abrar, Guessasma Mohamed, Davidovits Ralph, Pélegris Christine (2025-06)
    Unveiling Additive Effects in 3D Printed Geopolymer Composites:
    A Multi-Scale Analysis Coupling Rheological Insights and CFD-Optimized Deposition
  83. Ribeiro João, Campos Tatiana, Brandão Filipe, Figueiredo Bruno et al. (2025-06)
    3DCP Composite Systems:
    Additive Manufacturing of a Concrete and Cellulose Interlocking Wall
  84. Gomez Jaramillo Laura, Luković Mladena, Šavija Branko, Zhou Wen (2025-06)
    Recycled Sand for 3D-Printed Strain Hardening Cementitious Composite:
    A Review of Recent Developments
  85. Gailitis Rihards, Radina Liga, Pakrastins Leonids, Sprince Andina (2025-06)
    Mechanical and Early Long-Term Property Assessment of Foamed 3D-Printable Geopolymer Composite
  86. Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2025-06)
    Effects of Nozzle Thickness on the Mechanical Properties of 3D Printable Ultra-High Performance Strain-Hardening Cementitious Composites (UHP-SHCC)
  87. Ye Huzi, He Qianpeng, Ping Pengxin, Pan Jinlong et al. (2025-06)
    Anisotropic Flexural Behavior and Energy Absorption of 3D Printed Engineered Cementitious Composites (3DP-ECC) Beams Under Low-Velocity Impact
  88. Li Shuai, Liu Junli, Cheng Chi-Tsun, Xuan Hung et al. (2025-06)
    Design and Performance of 3D Printed Bouligand Steel Fiber-Reinforced Cementitious Composite Curved Beams
  89. Su Yanli, Wu Chang, Shang Jiaqi, Zhang Pu (2025-06)
    Mechanical Properties of 3D-Printed High-Ductility Cementitious Composite with Sulphoaluminate Cement and Modified Crumb Rubber
  90. Chen Meng, Sun Hao, Wang Yuting, Zhang Tong (2025-05)
    Relationship Between Interfacial Pore Structure and Anisotropic Dynamic Splitting Behaviour of 3D Printed Engineered Cementitious Composites
  91. Nieświec Martyna, Chajec Adrian, Šavija Branko (2025-05)
    Effect of Ground Copper Slag on the Fresh Properties of 3d Printed Cementitious Composites
  92. Raza Ali, Junjie Zhang, Fan Jiahui, Umar Muhammad et al. (2025-05)
    Comprehensive Study on the Microstructural and Mechanical Performance of 3D-Printed Engineered Cementitious Composites with Yellow River Sand Integration
  93. Hiremath Shivashankarayya, Mathapati Gururaj, Chiniwar Dundesh, Vishwanatha H. (2025-05)
    Performance Evaluation of Cementitious Composites by Designing an Extrusion System for Construction 3D Printing
  94. Irshidat Mohammad, Albeitjali Naeem, Amjad Umar, Alnuaimi Hamad et al. (2025-05)
    From Waste to Strength:
    Recycled Steel Fibers for Sustainable 3D Printing of Cementitious Composites
  95. Ersoy Seher, Abuqasim Shaima, Kurtay Yıldız Mine, Öztürk İrfan et al. (2025-05)
    Machine Learning Approximation of Water Transport in 3D-Printable Composites via Karsten Tube
  96. Lopes Sousa Israel, Liu Han, Alessandro Antonella, Laflamme Simon et al. (2025-05)
    Piezoresistive Performance of 3D Printed Cementitious Composites Doped with Carbon Microfibers
  97. Yang Guojun, Weng Yiwei, Tian Jiefu, Yang Zhenjun (2025-05)
    3D Printing Towards Cost-Effective Design of Composite UHPFRC Beams:
    Effects of Fiber Distribution and Orientation on Flexural Performances and Failure Mode Transition
  98. Qiao Zhigang, Li Hui, Wang Fei, Qi Yongle et al. (2025-04)
    Optimizing Thermal Energy Storage in 3D Printed Concrete with Hollow Ceramsite Composite Phase Change Materials
  99. Yassin Ahmed, Hafez Mohamed, Aboelhassan Mohamed (2025-04)
    Experimental and Numerical Investigation on the Effect of Different Types of Synthetic Fibers on the Flexure Behavior and Mechanical Properties of 3D Cementitious Composite Printing Provided with Cement CEM II/A-P
  100. Cho Eunsan, Gwon Seongwoo, Cha Soowon, Shin Myoungsu (2025-04)
    Impact of Accelerator on Rheological Properties of Cement Composites with Cellulose Microfibers:
    3D Printing Perspective
  101. Nieświec Martyna, Chajec Adrian (2025-03)
    Effect of Materials on the Properties of Fresh Cementitious Composites for 3D Printing:
    Short Review
  102. Du Guoqiang, Sun Yan, Qian Ye (2025-03)
    In-Plane and Out-of-Plane Compressive Performance of Bio-Inspired 3D Printed Strain-Hardening Cementitious Composite Lattice Structures
  103. Koszela Kamila, Chajec Adrian (2025-03)
    Sustainable Additive Manufacturing:
    How the Composition of the Cementitious Mix Influences Its Fresh Properties
  104. Chai Hwa, Shiotani Tomoki (2025-03)
    Opening Letter of RILEM TC QPA:
    Quality and Performance Assurance of Additively Manufactured Cementitious Composites by Advanced Non-Invasive Techniques
  105. Zhou Wen, Xu Yading, Meng Zhaozheng, Xie Jinbao et al. (2025-03)
    Filament Stitching:
    An Architected Printing Strategy to Mitigate Anisotropy in 3D-Printed Engineered Cementitious Composites
  106. Liu Han, Laflamme Simon, Cardinali Amelia, Lyu Ping et al. (2025-03)
    Enhancing 3D-Printed Cementitious Composites with Recycled Carbon Fibers from Wind Turbine Blades
  107. Chen Meng, Cheng Jianhua, Zhang Tong, Wang Yuting (2025-03)
    Experimental Characterization and Constitutive Modelling of the Anisotropic Dynamic Compressive Behavior of 3D Printed Engineered Cementitious Composites
  108. Araújo Rísia, Martinelli Antônio, Cabral Kleber, Nunes Ueslei et al. (2025-03)
    Effect of Lightweight Expanded Clay Aggregate (LECA) On the Printability of Cementitious Compositions for 3D Printing
  109. Zhu Binrong, Zhang Yuhang, Ye Huzi, Wei Yang et al. (2025-03)
    Low-Velocity Impact Performance of Biomimetic 3D Printed Engineered Cementitious Composites Beams
  110. Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Deng Qi et al. (2025-02)
    Fresh Properties and Rheological Behavior of 3D-Printed Cementitious Composites Incorporating Recycled PVC and Nylon Fibers:
    An Experimental Approach
  111. Bakhshi Amir, Zafar Muhammad, Hojati Maryam (2025-02)
    A Study on Achieving High Tensile Ductility in 3D-Printable Engineered Cementitious Composites Reinforced with 8mm Fibers
  112. Teng Fei, Xu Fengming, Yang Minxin, Yu Jie et al. (2025-02)
    Development of Sustainable Strain-Hardening Cementitious Composites Containing Diatomite for 3D Printing
  113. Shen Qiang, Sun Dongpu, Lu Chenyu, Zhang Zhigang et al. (2025-02)
    Fresh and Anisotropic-Mechanical Properties of Polyoxymethylene Fibers Reinforced 3D Printable Cementitious Composites
  114. Chen Wenguang, Liang Long, Zhou Boyang, Ye Junhong et al. (2025-02)
    A Fracture Mechanics Model for Predicting Tensile Strength and Fracture Toughness of 3D Printed Engineered Cementitious Composites
  115. Du Guoqiang, Qian Ye (2025-01)
    Enhancing the Fracture and Flexural Behavior of 3D Printed Strain-Hardening Cementitious Composites with Nature-Inspired Single and Double Bouligand Structures
  116. Srinivas Dodda, Panda Biranchi, Suraneni Prannoy, Sitharam Thallak (2025-01)
    Influence of Mixture-Composition and Carbonation-Curing on Properties of Sustainable 3D Printable Mortars
  117. Chen Meng, Yu Kanghao, Zhang Tong, Wang Yuting (2025-01)
    Characterizing and Modelling the Bond-Slip-Behavior of Steel-Bars in 3D Printed Engineered Cementitious Composites
  118. Yu Jie, Teng Fei, Ye Junhong, Zhang Dong et al. (2025-01)
    Size-Dependent Model to Predict the Flexural-Strength of 3D Printed Engineered Cementitious Composites Beams
  119. Yu Jie, Xu Fengming, Zhang Hanghua, Ye Junhong et al. (2025-01)
    Leveraging Incinerator Bottom Ash for Mitigating Early-Age Shrinkage in 3D Printed Engineered Cementitious Composites
  120. Fernand Muhirwa, Yang Zhenjun (2025-01)
    Structural and Microstructural Behavior of Novel 3DP-UHPFRC Beam with Discrete Steel-Fibers and Steel-FRP Composite Bar
  121. Tinoco Matheus, Cavalcante Tiago, Andrade Luiza, Araújo Olga et al. (2025-01)
    Mix-Design-Strategies for 3D Printable Bio-Based Cementitious Composites Using Rice-Husk-Particles as Multifunctional Aggregates
  122. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa et al. (2024-12)
    From Local Earth to Modern Structures:
    A Critical Review of 3D Printed Cement Composites for Sustainable and Efficient Construction
  123. Bai Meiyan, Xiao Jianzhuang, Ding Tao, Yu Kequan (2024-12)
    Interfacial Bond-Properties Between 3D Printed Engineered Cementitious Composite and Post-Cast Concrete
  124. Guan Jingyuan, Wang Li, Huang Yimiao, Ma Guowei (2024-12)
    3D Printed Concrete Composite Slabs Fabricated by Pre-Stressed Reinforced Permanent Formwork:
    Design, Manufacturing, and Performance
  125. Yaqub Walid, Aslani Farhad (2024-12)
    Mechanical Properties and Fire-Resistance of 3D Printed Cementitious Composites with Plastic Waste
  126. Liu Han, Laflamme Simon, Cai Bin, Lyu Ping et al. (2024-11)
    Investigation of 3D Printed Self-Sensing UHPC Composites Using Graphite and Hybrid Carbon Microfibers
  127. Rasel Risul, Hossain Md, Zubayer Md, Zhang Chaoqun (2024-11)
    Exploring the Fresh and Rheology Properties of 3D Printed Concrete with Fiber-Reinforced Composites:
    A Novel Approach Using Machine Learning Techniques
  128. Ge Yali, Yao Jie (2024-11)
    Influence of FA and HPMC on the Fresh Properties and Anisotropy of 3D Printing Engineered Cementitious Composites
  129. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-11)
    Structural Analysis of 3D Printed Concrete Walls Under Quasi-Static Cyclic Loading Using Composite Micro-Model
  130. Ali Mohd, Rub Rashid, Banat Fawzi, Kim Tae-Yeon (2024-11)
    Enhancing the Printing Quality and Mechanical Properties of 3D Printed Cement Composites with Date-Syrup-Based Graphene-Coated-Sand Hybrid
  131. Demont Léo, Bono Victor, Ducoulombier Nicolas, Mesnil Romain et al. (2024-11)
    Anisotropic Concrete:
    A Composite Look on the Engineering and Architecture of Concrete Construction
  132. Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Yang Min et al. (2024-11)
    Enhancing Mechanical Properties of 3D Printed Cementitious Composites Utilizing Hybrid Recycled PP and PET-Fibers
  133. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-11)
    Development of Ultra-Ductile Strain-Hardening 3D Printed Concrete Composite Utilizing Critical Fiber Volume and Coarse Aggregate
  134. Wan Linxiaoyi, Liu Jingyang, Bard Joshua, Cupkova Dana (2024-11)
    Towards Adaptive Additive Manufacturing:
    Image-Based Monitoring for Binder Jet 3D Printing of Coarse Composite Concrete Powders
  135. Liu Bing, Guo Yazhao, Wang Yang, Liu Qizhou et al. (2024-11)
    Study on the Compression Performance of 3D Printing Concrete Permanent Formwork Composite Columns
  136. Lin Manfang, Li Lingzhi, Jiang Fangming, Ding Yao et al. (2024-11)
    Automated Reinforcement of 3D Printed Engineered Cementitious Composite Beams
  137. Sousa Israel, Alessandro Antonella, Mesquita Esequiel, Laflamme Simon et al. (2024-11)
    Comprehensive Review of 3D Printed Cementitious Composites with Carbon Inclusions:
    Current Status and Perspective for Self-Sensing Capabilities
  138. Liu Bing, Cheng Xiao-Ming, Wang Lian-Gang, Qian Kai (2024-10)
    Compressive Performance of PVA Fiber-Reinforced 3D Concrete Printing Permanent Formwork Composite Columns Reinforced with BFRP-Bars
  139. Youssef Passant, Feky Muhammad, Ragab Ahmed, Serag Mohamed (2024-10)
    Geopolymer Composites for 3D Printing Applications:
    A Statistical Analysis Approach
  140. Ding Yao, Ou Xingjian, Qi Hongtuo, Xiong Gang et al. (2024-10)
    Inter-Layer Bonding Performance of 3D Printed Engineered Cementitious Composites:
    Rheological Regulation and Fiber Hybridization
  141. Federowicz Karol, Cendrowski Krzysztof, Sikora Paweł (2024-10)
    Low-Carbon Cementitious Composite Incorporated with Biochar and Recycled Fines Suitable for 3D Printing Applications:
    Hydration, Shrinkage and Early-Age Performance
  142. Varela Hugo, Tinoco Matheus, Mendoza Reales Oscar, Toledo Filho Romildo et al. (2024-10)
    3D Printable Cement-Based Composites Reinforced with Sisal-Fibers:
    Rheology, Printability and Hardened Properties
  143. Rodriguez Fabian, Moini Mohamadreza, Agrawal Shubham, Williams Christopher et al. (2024-10)
    Mechanical Response of Small-Scale 3D Printed Steel-Mortar Composite Beams
  144. Sorgenfrei Reese, Zandifaez Peyman, Zhou Hongyu, Fiske Michael (2024-10)
    Investigating the Effect of Air-Voids on the Mechanical Properties of 3D Printable Cementitious Composites
  145. Du Guoqiang, Qian Ye (2024-10)
    Bio-Inspired 3D Printing of Strain-Hardening Cementitious Composites Reticulated Shell-Roofs
  146. Cuevas Villalobos Karla, Chung Sang-Yeop, Sikora Paweł, Stephan Dietmar (2024-10)
    Performance of Normal-Weight and Lightweight 3D Printed Cementitious Composites with Recycled Glass:
    Sorption and Microstructural Perspective
  147. Du Guoqiang, Sun Yan, Qian Ye (2024-10)
    Nature-Inspired Approach for Enhancing the Fracture Performance of 3D Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
  148. Liu Xuelin, Sheng Haitao, Feng Binqing, Wang Liang et al. (2024-09)
    Development of Novel Alkaline-Electrolyzed-Water on the Properties of 3D Printed Calcium-Sulphoaluminate-Cement Composites
  149. Schweizer Katie, Bhandari Sunil, Lopez-Anido Roberto, Korey Matthew et al. (2024-09)
    Recycling Large-Format 3D Printed Polymer Composite Formworks Used for Casting Pre-Cast Concrete:
    Technical Feasibility and Challenges
  150. Edmund Dineth, Zahra Tatheer, Asad Mohammad, Thamboo Julian (2024-09)
    Experimental Investigation on Tensile-Characteristics of 3D Printed Auxetic-Embedded Cementitious Composites and Shear-Bonding Behavior to Masonry
  151. Dulaj Albanela, Peeters Sef, Poorsolhjouy Payam, Salet Theo et al. (2024-09)
    Combined Analytical and Numerical Modelling of the Electrical Conductivity of 3D Printed Carbon-Nano-Tube-Cementitious-Nano-Composites
  152. Chajec Adrian, Šavija Branko (2024-09)
    The Effect of Using Surface Functionalized Granite-Powder-Waste on Fresh Properties of 3D Printed Cementitious Composites
  153. Liu Xuelin, Sheng Haitao, Feng Binqing, Zhao Piqi et al. (2024-09)
    Effect of Potassium and Sodium-Based Electrolyzed Water on the Rheological Properties and Structural Build-Up of 3D Printed Cement Composites
  154. Meyuhas Ohad, Larianovsky Pavel, Natanian Jonathan, Sprecher Aaron (2024-09)
    Thermal and Structural Performance of Cork-Cement Composite for Additive Manufacturing
  155. Singh Pranay, Gadde Venkateswara, Zhou Chi, Okumus Pinar et al. (2024-09)
    Development of 3D Printable Strain-Hardening Cementitious Composites for Bridge-Related Applications
  156. Ivaniuk Egor, Mechtcherine Viktor (2024-09)
    A Method for Measuring the Bond Strength Between Impregnated Carbon-Yarn and 3D Printed Strain-Hardening Cementitious Composites
  157. Tarhan Yeşim, Tarhan İsmail, Jacquet Yohan, Perrot Arnaud (2024-09)
    Mechanical Behavior of 3D Printed and Textile-Reinforced Eco-Friendly Composites
  158. Baytak Tugba, Gdeh Tawfeeq, Jiang Zhangfan, Arce Gabriel et al. (2024-09)
    Rheological, Mechanical, and Environmental Performance of Printable Graphene-Enhanced Cementitious Composites with Limestone and Calcined Clay
  159. Wang Xiangyu, Du Liangfen, Liu Zhenbang, Li Mingyang et al. (2024-09)
    3D Cementitious Composites Printing with Pretreated Recycled Crumb-Rubber:
    Mechanical and Acoustic Insulation Properties
  160. Rider Benjamin, Kurtis K., Stewart L. (2024-09)
    Quantification of Porosity and Sorptivity in Fiber-Reinforced 3D Printed Mortar:
    Connecting Material-Composition and Structural Performance
  161. Tasaki Haruto, Asakawa Tomoya, Kobayashi Noriyuki, Nishiwaki Tomoya et al. (2024-09)
    A Direction-Independent Reinforcement by Combination of Fiber-Reinforced Cementitious Composite and Automated Pin Insertion
  162. Šahmenko Genādijs, Šinka Māris, Bumanis Girts, Sapata Alise et al. (2024-09)
    Ternary Gypsum-Cement-Pozzolan Composites for 3D Printing with Reduced Environmental Impact
  163. Qian Shunzhi, Zhao Huanyu, Meng Dan (2024-09)
    Numerical Study of Concrete Beams with 3D Printed Strain-Hardening Cementitious Composites (SHCC)
  164. Sapata Alise, Šinka Māris, Šahmenko Genādijs, Bajāre Diāna et al. (2024-09)
    Development of 3D Printable Cement-Based Composite Containing Oil Shale Ash
  165. Oliveira Romano Roberto, Lima Francisco, Mesquita José, Pan Eduardo et al. (2024-09)
    Extended Rheological Characterization as a Tool for Low-Binder 3D Printing Compositions
  166. Silfwerbrand Johan (2024-09)
    Composite Concrete Columns of 3DP Concrete and Self-Compacting Concrete Subjected to Normal Force
  167. Zhou Wen, Xu Yading, Šavija Branko, McGee Wesley et al. (2024-09)
    Stitching Engineered Cementitious Composites (ECC ):
    Unraveling Anisotropy Challenges Through Architectured 3D Printing Path Design
  168. Zhang Hongping, Duan Shuni, Hu Zhichao, Liu Litao et al. (2024-09)
    Evaluation of Plasticity and Determination of Deformation Index of 3D Printed Composite Cement-Based Materials
  169. Zhao Zhihui, Liu Minghao, Kang Aihong, Cai Xianhuan et al. (2024-08)
    Rheology and Buildability of Sustainable 3D Printed Magnesium-Potassium-Phosphate-Cement Composites Incorporating MgO-SiO2-K2HPO4
  170. Du Guoqiang, Sun Yan, Qian Ye (2024-08)
    3D Printed Strain-Hardening Cementitious Composites (3DP-SHCC) Reticulated Shell Roof Inspired by the Water Spider
  171. Ding Yao, Liu Jiepeng, Ou Xingjian, Nishiwaki Tomoya et al. (2024-08)
    3D Printing Hybrid-Fiber-Reinforced Engineered Cementitious Composites:
    Feasibility in Long-Open-Time Applications
  172. Yang Rijiao, Xu Chengji, Lan Yan, Qiu Yue et al. (2024-08)
    Near Pixel-Level Characterisation of Micro-Fibers in 3D Printed Cementitious Composites and Migration Mechanisms Using a Novel Iterative Method
  173. Buschmann Birger, Henke Klaudius, Asshoff Carsten, Talke Daniel et al. (2024-08)
    Additive Manufacturing of Wood-Composite-Parts by Individual Layer Fabrication:
    Influence of Process Parameters on Product Properties
  174. Kladovasilakis Nikolaos, Pemas Sotirios, Pechlivani Eleftheria (2024-07)
    Computer-Aided Design of 3D Printed Clay-Based Composite Mortars Reinforced with Bio-Inspired Lattice Structures
  175. Gonzales Betty, Zavaleta Diana, Bertolotti Bruno, Aguilar Rafael et al. (2024-07)
    Comprehensive Investigation into the Influence of Soil Composition and Water Content on Cracking Due to Drying Shrinkage in 3D Printed Earthen Structures
  176. Zhang Xiaoyue, Huang Wanru, Chen Zhaohui (2024-07)
    Mechanical Behavior Investigation for the Timber-UHPC Shear Connector in 3D Printed Concrete-Based Composite Beam
  177. Hanifa Mohamad, Daruari Harish, Figueiredo Bruno, Mendonça Paulo (2024-07)
    Embodied Carbon of Structural Earthen Composites with Natural Materials and Byproducts Suitable for Robotic 3D Printing
  178. Asghari Y., Mohammadyan-Yasouj S., Petrů M., Ghandvar H. et al. (2024-07)
    3D Printing and Implementation of Engineered Cementitious Composites:
    A Review
  179. Barve Prasad, Bahrami Alireza, Shah Santosh (2024-07)
    A Comprehensive Review on Effects of Material-Composition, Mix-Design, and Mixing-Regimes on Rheology of 3D Printed Geopolymer Concrete
  180. Bai Gang, Guan Jingyuan, Wang Li, Li Zhijian et al. (2024-07)
    Bending Performance of 3D Printed Ultra-High-Performance Concrete Composite Beams
  181. Wang Yuting, Chen Meng, Zhang Tong, Zhang Mingzhong (2024-07)
    Hardening Properties and Microstructure of 3D Printed Engineered Cementitious Composites Based on Limestone-Calcined-Clay-Cement
  182. Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-07)
    Development of Strain-Hardening Cementitious Composites (SHCC) As Bonding Materials to Enhance Inter-Layer and Flexural Performance of 3D Printed Concrete
  183. Ye Junhong, Zhuang Zicheng, Teng Fei, Yu Jie et al. (2024-07)
    Comparative Environmental-Assessment of 3D Concrete Printing with Engineered Cementitious Composites
  184. Ivaniuk Egor, Tošić Zlata, Müller Steffen, Lordick Daniel et al. (2024-07)
    Automated Manufacturing of Reinforced Modules of Segmented Shells Based on 3D Printing with Strain-Hardening Cementitious Composites
  185. Duan Jiaqi, Sun Shouzheng, Chi Shengfeng, Hu Chunyou et al. (2024-06)
    Effect of Process Parameters on Forming Quality and Flexural Strength of Continuous-Fiber-Reinforced Cement-Based 3D Printed Composites
  186. Ghaffar Seyed, Noaimat Yazeed, Chougan Mehdi, Kheetan Mazen (2024-06)
    Emerging Resources for the Development of Low-Carbon Cementitious Composites for 3D Printing Applications
  187. Krishna R., Rehman Asif, Mishra Jyotirmoy, Saha Suman et al. (2024-06)
    Additive Manufacturing of Geopolymer Composites for Sustainable Construction:
    Critical Factors, Advancements, Challenges, and Future Directions
  188. Liu Junli, Haikola Pirjo, Fox Kate, Tran Jonathan (2024-06)
    3D Printing of Cementitious Composites with Seashell-Particles:
    Mechanical and Microstructural Analysis
  189. Kilic Ugur, Soliman Nancy, Omran Ahmed, Ozbulut Osman (2024-06)
    Effects of Cellulose Nanofibrils on Rheological and Mechanical Properties of 3D Printable Cement Composites
  190. Šahmenko Genādijs, Puzule Līga, Sapata Alise, Šlosbergs Pēteris et al. (2024-06)
    Gypsum-Cement-Pozzolan Composites for 3D Printing:
    Properties and Life Cycle Assessment
  191. Yan Kang-Tai, Wang Xian-Peng, Ding Yao, Li Lingzhi et al. (2024-06)
    3D Printed LC3-Based Lightweight Engineered Cementitious Composites:
    Fresh State, Hardened Material-Properties and Beam-Performance
  192. Basha Shaik, Nugraha Joshua, Rehman Atta, Choi Kichang et al. (2024-06)
    Structuration and Yield Strength Characterization of Hybrid Alkali-Activated Cement Composites for Ultra-Rapid 3D Construction Printing
  193. Chen Wenguang, Ye Junhong, Jiang Fangming, Fediuk Roman et al. (2024-05)
    Printability Region for 3D Printable Engineered Cementitious Composites
  194. Shoaei Parham, Kjøniksen Anna-Lena, Pamies Ramón, Pilehvar Shima (2024-05)
    Characterization of 3D Printable Geopolymer Mortars:
    Effect of Binder Composition and Basalt-Fiber-Reinforcement
  195. Bai Meiyan, Xiao Jianzhuang, Wu Yuching, Ding Tao (2024-05)
    Experimental and Numerical Study on the Flexural Behavior of 3D Printed Composite Beams with U-Shaped ECC Formwork
  196. Rahman Mahfuzur, Rawat Sanket, Yang Chunhui, Mahil Ahmed et al. (2024-05)
    A Comprehensive Review on Fresh and Rheological Properties of 3D Printable Cementitious Composites
  197. Sarker Mohiuddin, Rahmadan Md, Abedin Mohammad (2024-05)
    Engineered Cementitious Composites:
    Design, Structural and 3D Printing Applications
  198. Yan Kang-Tai, Li Lingzhi, Ye Junhong, Bazarov Dilshod et al. (2024-05)
    Anisotropic Size-Effect of 3D Printed LC3-Based Engineered Cementitious Composites
  199. Du Guoqiang, Qian Ye (2024-05)
    Effects of Printing-Patterns and Loading-Directions on Fracture Behavior of 3D Printed Strain-Hardening Cementitious Composites
  200. Liu Han, Laflamme Simon, Alessandro Antonella, Ubertini Filippo (2024-05)
    3D Printed Self-Sensing Cementitious Composites Using Graphite and Carbon-Micro-Fibers
  201. Mu Ru, Chen Jiao, Qing Longbang, Fan Chunhao et al. (2024-05)
    Properties of a Steel-Fiber-Reinforced Cementitious Composite Stool with Digitally Distributed Steel-Fibers
  202. Chen Anguo, Dai Pengfei, Lyu Qifeng (2024-05)
    Effect of Alkalized Straw-Fibers on the Properties of Three Dimensional Printed Cementitious Composite
  203. Bodur Burak, Mecit Işık Muhammet, Benli Ahmet, Bayrak Barış et al. (2024-05)
    Durability of Green Rubberized 3D Printed Lightweight Cement Composites Reinforced with Micro-Attapulgite and Micro-Steel-Fibers:
    Printability and Environmental Perspective
  204. Youssef Passant, Feky Muhammad, Ragab Ahmed, Serag Mohamed (2024-04)
    Characterization of Geopolymer Composites for 3D Printing:
    A Microstructure Approach
  205. Anandaraj S., Sowmya S., Krishnaraja A., Mithun T. (2024-03)
    Development of Green Engineered Cementitious Composite Using Fly-Ash and Nano-Silica for 3D Printing
  206. Pan Jinlong, Ping Pengxin, Ding Boyin, Zhu Binrong et al. (2024-03)
    Impact Behavior of 3D Printed Fiber-Reinforced Cementitious Composite Beams
  207. Jancarikova Denisa, Khongova Ingrid, Bibora Petr, Szklorzova Halina (2024-03)
    3D Printed Cement Composites Testing
  208. Chen Mingxu, Xu Jiabin, Yuan Lianwang, Zhao Piqi et al. (2024-03)
    Use of Creep and Recovery-Protocol to Assess the Printability of Fiber-Reinforced 3D Printed White-Portland-Cement Composites
  209. Zandifaez Peyman, Shen Zhenglai, Sorgenfrei Reese, Li Yucen et al. (2024-03)
    Pathways to Formulate Lightweight and Ultra-Lightweight 3D Printable Cementitious Composites
  210. Zhu Lingli, Zhao Wanting, Zhao Yu, Guan Xuemao (2024-03)
    Mechanism Analysis of Rheological Properties of 3D Printed Steel-Slag Cementitious Composite Based on Low-Field Nuclear-Magnetic-Relaxation-Test
  211. Du Guoqiang, Sun Yan, Qian Ye (2024-03)
    Flexural Performance of Nature-Inspired 3D Printed Strain-Hardening Cementitious Composites with Bouligand Structures
  212. Chen Meng, Fang Shuai, Wang Guangquan, Xuan Yiwei et al. (2024-03)
    Compressive and Flexural Behavior of Engineered Cementitious Composites-Based Auxetic Structures:
    An Experimental and Numerical Study
  213. Gou Hongxiang, Sofi Massoud, Zhang Zipeng, Zhu Mintao et al. (2024-03)
    Combined Printable and Mechanical Analysis of 3D Printed Green High-Strength, Lightweight Engineered Cementitious Composites
  214. Lai Xin, Gong Chen, He Enpei, Li Yinmian et al. (2024-02)
    Deep Learning for Predicting the Strength of 3D Printable Engineered Cementitious Composites
  215. Zhao Guoqi, Fan Yichang, Tang Can, Wei Yuanyuan et al. (2024-02)
    Preparation and Compressive Properties of Cementitious Composites Reinforced by 3D Printed Cellular Structures with a Negative Poisson's Ratio
  216. Nóbrega Anna, Queiroz Junior Cleanto, Souza Wendell, Cabral Kleber et al. (2024-02)
    Computational Modeling for Structural Element Analysis Using Cement Composites in 3D Printing
  217. Zhou Wen, Zhu He, Hu Wei-Hsiu, Wollaston Ryan et al. (2024-02)
    Low-Carbon, Expansive Engineered Cementitious Composites (ECC) In the Context of 3D Printing
  218. Zhang Hongmei, Hu Fan, Duan Yuanfeng, Liao Jian et al. (2024-02)
    Mechanical Properties and Micro-Structure of Highly Flowable Geopolymer Composites with Low-Content Polyvinyl-Alcohol-Fiber
  219. Tang Weichen, Sun Junbo, Wang Yufei, Chen Zhaohui et al. (2024-02)
    Electromagnetic Absorption Properties of 3D Printed Fiber-Oriented Composites Under Different Paths
  220. Pi Yilin, Lu Cong, Yao Yiming, Li Baoshan (2024-01)
    A Rheological-Based Printability-Assessment Method for 3D Printing Engineered Cementitious Composites Considering Fiber-Dispersion
  221. Xiao Jianzhuang, Bai Meiyan, Wu Yuching, Duan Zhenhua et al. (2024-01)
    Inter-Layer Bonding Strength and Pore Characteristics of 3D Printed Engineered Cementitious Composites
  222. Slavcheva Galina, Artamonova Olga, Kotova Кristina, Shvedova Mariia et al. (2023-12)
    Pull-Out Behavior of Steel- and Carbon-Fibers in 3D Printable Cement Matrices of Various Compositions
  223. Rocha Douglas, Faria Paulina, Lucas Sandra (2023-12)
    Additive Manufacturing of Earth-Based Materials:
    A Literature Review on Mortar-Composition, Extrusion, and Processing Earth
  224. Fahim Abdullah, Admassu Natnael, Dailey Garret, Moradllo Mehdi (2023-12)
    Application of Cellulose-Nano-Crystals in 3D Printed Alkali-Activated Cementitious Composites
  225. Wang Li, Wang Fucheng, Li Rong, Wang Qiao (2023-12)
    Interfacial Constitutive Model of 3D Printed Fiber-Reinforced Concrete Composites and Its Experimental Validation
  226. Qiu Minghong, Sun Yan, Qian Ye (2023-12)
    Interfacial Bonding Performance of 3D Printed Ultra-High-Performance Strain-Hardening Cementitious Composites and Cast Normal Concrete
  227. Zavaleta Diana, Ñañez Robert, Silva Guido, Ruiz Gaby et al. (2023-11)
    Additive Construction Using Enhanced Earthen-Based Composites:
    Improvement of the Mechanical Strength and Water Durability Using Chitosan and Agave-Fibers
  228. Jauk Julian, Vašatko Hana, Gosch Lukas, Ristoski Kristijan et al. (2023-11)
    Coextrusion of Clay-Based Composites:
    Using a Multi-Material Approach to Achieve Gradient Porosity in 3D Printed Ceramics
  229. Ye Junhong, Zhang Jiangdi, Yu Jie, Yu Jiangtao et al. (2023-11)
    Flexural Behaviors of 3D Printed Lightweight Engineered Cementitious Composites (ECC) Slab with Hollow Sections
  230. Šána Vladimír, Litoš Jiří, Kolář Karel (2023-10)
    Mechanical Properties of the New Cement Composite Mixture Appropriate for Robotic Processing
  231. Zhu Binrong, Wang Yufei, Sun Junbo, Wei Yang et al. (2023-10)
    An Experimental Study on the Influence of Waste-Rubber-Particles on the Compressive, Flexural and Impact Properties of 3D Printable Sustainable Cementitious Composites
  232. Ye Junhong, Yang Minxin, Yu Jiangtao, Dai Yecheng et al. (2023-10)
    Size-Effect on Flexural and Fracture Behaviors of 3D Printed Engineered Cementitious Composites:
    Experimental and Numerical Studies
  233. Christ Julian, Leusnik Sander, Koss Holger (2023-10)
    Multi-Axial 3D Printing of Biopolymer-Based Concrete Composites in Construction
  234. Pi Yilin, Lu Cong, Li Baoshan, Zhou Junhui (2023-10)
    Crack Propagation and Failure Mechanism of 3D Printing Engineered Cementitious Composites (3DP-ECC) Under Bending Loads
  235. Hass Lauri, Nefs Karsten, Bos Freek, Salet Theo (2023-10)
    Application Potential of Combining Strain-Hardening Cementitious Composites and Helical Reinforcement for 3D Concrete Printed Structures:
    Case Study of a Spiral Staircase
  236. Li Zhuming, Aslani Farhad (2023-10)
    Performance of 3D Printed Beams and Slabs Using Self-Sensing Cementitious Composites and DIC Method
  237. Caron Jean-François, Ducoulombier Nicolas, Demont Léo, Bono Victor et al. (2023-10)
    3D Printing of Continuous-Fibers Cementitious Composites:
    Anisotropic 3D Mortar
  238. Bumanis Girts, Sapata Alise, Šinka Māris, Spuriņa Ella et al. (2023-10)
    Additive Manufacturing of Lightweight Gypsum and Expanded Polystyrene Granulate Composite
  239. Zafar Muhammad, Bakhshi Amir, Hojati Maryam (2023-10)
    Printability and Shape Fidelity Evaluation of Self-Reinforced Engineered Cementitious Composites
  240. Curbach Manfred, Hegger Josef, Bielak Jan, Schmidt Christopher et al. (2023-10)
    New Perspectives on Carbon Reinforced Concrete Structures:
    Why New Composites Need New Design-Strategies
  241. Overmeir Anne, Šavija Branko, Bos Freek, Schlangen Erik (2023-09)
    Effects of 3D Concrete Printing Phases on the Mechanical Performance of Printable Strain-Hardening Cementitious Composites
  242. Zhu Lingli, Yao Jie, Zhao Yu, Ruan Wenqiang et al. (2023-09)
    Printability and Early Mechanical Properties of Material-Composition Modified 3D Printing Engineered Cementitious Composites Based on the Response-Surface-Methodology
  243. Bong Shin, Nematollahi Behzad, Mechtcherine Viktor, Li Victor et al. (2023-09)
    3D Printed Engineered, Strain-Hardening Geopolymer Composite as Permanent Formwork for Construction of Reinforced Concrete Beam
  244. Li Mingyang, Zhang Dong, Wong Teck, Tan Ming et al. (2023-09)
    Modeling and Experimental Investigation of Fiber Orientation in Cast and 3D Printed Cementitious Composites
  245. Ospina Salazar Ana, Valencia Isaza Andrés, Restrepo Montoya José, Mejía Arcila Johanna et al. (2023-09)
    Upcycling Fly-Ash, Red-Clay-Brick Waste, and Paper-Sludge as Feedstock for Manufacturing a Lightweight Extruded Composite:
    Design and Characterization
  246. Overmeir Anne, Šavija Branko, Bos Freek, Schlangen Erik (2023-08)
    3D Printable Strain-Hardening Cementitious Composites (3DP-SHCC):
    Tailoring Fresh and Hardened State Properties
  247. Ye Junhong, Teng Fei, Yu Jie, Yu Shiwei et al. (2023-08)
    Development of 3D Printable Engineered Cementitious Composites with Incineration-Bottom-Ash for Sustainable and Digital Construction
  248. Shilar Fatheali, Ganachari Sharanabasava, Patil Veerabhadragouda, Bhojaraja B. et al. (2023-08)
    A Review of 3D Printing of Geopolymer Composites for Structural and Functional Applications
  249. Zhou Wen, McGee Wesley, Gökçe H., Li Victor (2023-08)
    A Bio-Inspired Solution to Alleviate Anisotropy of 3D Printed Engineered Cementitious Composites (3DP-ECC):
    Knitting/Tilting Filaments
  250. Xu Yading, Šavija Branko (2023-08)
    3D Auxetic Cementitious-Polymeric Composite Structure with Compressive Strain-Hardening Behavior
  251. Nikravan Ata, Aydoğan Olcay, Dittel Gözdem, Scheurer Martin et al. (2023-06)
    Implementation of Continuous Textile-Fibers in 3D Printable Cementitious Composite
  252. Pietras Daniel, Zbyszyński Wojciech, Sadowski Tomasz (2023-06)
    A 3D Printing Method of Cement-Based FGM Composites Containing Granulated Cork, Polypropylene Fibers, and a Polyethylene Net Inter-Layer
  253. Hanifa Mohamad, Figueiredo Bruno, Mendonça Paulo (2023-04)
    Additive Manufacturing Earth-Based Composite:
    Strategical and Computational Methodology for Building-Shell-Geometries
  254. Bai Meiyan, Wu Yuching, Xiao Jianzhuang, Ding Tao et al. (2023-04)
    Workability and Hardened Properties of 3D Printed Engineered Cementitious Composites Incorporating Recycled Sand and PE-Fibers
  255. Xu Nuoyan, Qian Ye (2023-04)
    Effects of Fiber-Volume Fraction, Fiber Length, Water-Binder Ratio, and Nano-Clay Addition on the 3D Printability of Strain-Hardening Cementitious Composites
  256. Jaji Mustapha, Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-04)
    Thixotropic Characterisation of Slag-Modified 3D Printable Metakaolin-Based Geopolymer Composite
  257. Valente Marco, Sambucci Matteo, Chougan Mehdi, Ghaffar Seyed (2023-04)
    Composite Alkali-Activated Materials with Waste-Tire-Rubber Designed for Additive Manufacturing:
    An Eco-Sustainable and Energy Saving Approach
  258. Kilic Ugur, Ma Ji, Baharlou Ehsan, Ozbulut Osman (2023-03)
    Effects of Viscosity-Modifying Admixture and Nano-Clay on Fresh and Rheo-Viscoelastic Properties and Printability Characteristics of Cementitious Composites
  259. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2023-03)
    Developing 3D Printable and Buildable Limestone-Calcined-Clay-Based Cement Composites with Higher Aggregate Content
  260. Atkinson Cynthia, Aslani Farhad (2023-03)
    Performance of 3D Printed Columns Using Self-Sensing Cementitious Composites
  261. Luo Surong, Lin Qian, Xu Wei, Wang Dehui (2023-03)
    Effects of Interval Time and Interfacial Agents on the Mechanical Characteristics of Ultra-High-Toughness Cementitious Composites Under 3D Printed Technology
  262. Liu Haoran, Xiao Jianzhuang, Ding Tao (2023-03)
    Flexural Performance of 3D Printed Composite Beams with ECC and Recycled Fine Aggregate Concrete:
    Experimental and Numerical Analysis
  263. Basha Shaik, Rehman Atta, Aziz Md, Kim Jung-Hoon (2023-02)
    Cement Composites with Carbon-Based Nanomaterials for 3D Concrete Printing Applications:
    A Review
  264. Bedarf Patrick, Calvo Barentin Cristian, Schulte Dinorah, Şenol Ayça et al. (2023-02)
    Mineral Composites:
    Stay-in-Place Formwork for Concrete Using Foam 3D Printing
  265. Pang Zhiming, Lu Cong, Li Baoshan, Wang Jiajie (2023-02)
    A Multi-Scale Model for Quantifying Fiber-Orientation Effects on the Tensile Properties of 3D Printed Engineered Cementitious Composites
  266. Ogura Hiroki, Yamamoto Shinya, Abe Hiroyuki (2023-01)
    Mechanical Properties of Fiber-Reinforced Cementitious Composites Manufactured Using 3D Printing Technology
  267. Chu Shaohua, Yang En-Hua, Unluer Cise (2023-01)
    Development of Nanofiber-Reinforced Reactive Magnesia-Based Composites for 3D Printing
  268. Diniz Hugo, Martinelli Antônio, Cabral Kleber, Ferreira Ruan et al. (2023-01)
    Synergistic Effects of the Use of Metakaolin, Sand and Water on the Properties of Cementitious Composites for 3D Printing
  269. Matos Ana, Emiroğlu Mehmet, Subaşı Serkan, Maraşlı Muhammed et al. (2023-01)
    Architectonic Cement-Based Composites 3D Printing
  270. Zhu Lingli, Yao Jie, Zhao Yu, Ruan Wenqiang et al. (2022-12)
    Effects of Composite Cementation System on Rheological and Working Performances of Fresh 3D Printable Engineered Cementitious Composites
  271. Nefs Karsten, Menkovski Vlado, Bos Freek, Suiker Akke et al. (2022-12)
    Automated Image Segmentation of 3D Printed Fibrous Composite Micro-Structures Using a Neural Network
  272. Jiang Fangming, Long Xiong, Tian Likang, Tan Yan et al. (2022-12)
    Tensile Strain-Hardening Cementitious Composites and Its Practical Exploration Without Reinforcement:
    A Review
  273. Tinoco Matheus, Gouvêa Lucas, Cássia Magalhães Martins Karenn, Toledo Filho Romildo et al. (2022-12)
    The Use of Rice Husk Particles to Adjust the Rheological Properties of 3D Printable Cementitious Composites Through Water Sorption
  274. Korniejenko Kinga, Setlak (nee Pławecka) Kinga, Kozub Barbara (2022-12)
    An Overview for Modern Energy-Efficient Solutions for Lunar and Martian Habitats Made Based on Geopolymers Composites and 3D Printing Technology
  275. Qing Longbang, Sun Honglei, Zhang Yuebo, Mu Ru et al. (2022-12)
    Research Progress on Aligned Fiber-Reinforced Cement-Based Composites
  276. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2022-12)
    Assessing Printing Synergism in a Dual 3D Printing System for Ultra-High-Performance Concrete In-Process Reinforced Cementitious Composite
  277. Zhou Yiyi, Jiang Dan, Sharma Rahul, Xie Yi et al. (2022-11)
    Enhancement of 3D Printed Cementitious Composite by Short Fibers:
    A Review
  278. Wang Lining, Aslani Farhad (2022-11)
    Structural Performance of Reinforced Concrete Beams with 3D Printed Cement-Based Sensor Embedded and Self-Sensing Cementitious Composites
  279. Lu Bing, Li Hongliang, Li Mingyang, Wong Teck et al. (2022-11)
    Mechanism and Design of Fluid Catalytic Cracking Ash-Blended Cementitious Composites for High-Performance Printing
  280. Goracci Guido, Salgado David, Gaitero Juan, Dolado Jorge (2022-11)
    Electrical Conductive Properties of 3D Printed Concrete Composite with Carbon Nanofibers
  281. Qaidi Shaker, Yahia Ammar, Tayeh B., Unis H. et al. (2022-10)
    3D Printed Geopolymer Composites:
    A Review
  282. Qu Zhengyao, Geng Guoqing (2022-10)
    Thermal Response Gelatin-Cement-Composite for 3D Concrete Printing
  283. Bong Shin, Nematollahi Behzad, Nerella Venkatesh, Mechtcherine Viktor (2022-09)
    Method of Formulating 3D Printable Strain-Hardening Alkali-Activated Composites for Additive Construction
  284. Dulaj Albanela, Salet Theo, Lucas Sandra (2022-09)
    Mechanical Properties and Self-Sensing Ability of Graphene-Mortar Compositions with Different Water-Content for 3D Printing Applications
  285. Li Mingyang, Weng Yiwei, Liu Zhixin, Zhang Dong et al. (2022-09)
    Optimizing of Chemical Admixtures for 3D Printable Cementitious Materials by Central Composite Design
  286. Wang Li, Lin Wenyu, Ma Hui, Li Dexin et al. (2022-09)
    Mechanical and Microstructural Properties of 3D Printed Aluminate-Cement-Based Composite Exposed to Elevated Temperatures
  287. Engelhard Michael, Kalytta-Mewesand Andreas, Volkmer Dirk (2022-09)
    Testing Methods for Deformation Characterization on 3D Printed Carbon Fiber-Reinforced Cementitious Composites
  288. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2022-09)
    Fresh Properties and Strength Evolution of Slag-Modified Fiber-Reinforced Metakaolin-Based Geopolymer Composite for 3D Concrete Printing Application
  289. Game Daniel, Giwa Ilerioluwa, Ahmed Hassan, Noorvand Hassan et al. (2022-09)
    Development of Ultra-High-Performance Engineered Cementitious Composites for 3D Printing Applications
  290. Zafar Muhammad, Bakhshi Amir, Hojati Maryam (2022-09)
    Toward 3D Printable Engineered Cementitious Composites:
    Mix-Design Proportioning, Flowability, and Mechanical Performance
  291. Duan Zhenhua, Li Lei, Yao Qinye, Zou Shuai et al. (2022-08)
    Effect of Metakaolin on the Fresh and Hardened Properties of 3D Printed Cementitious Composite
  292. Araújo Rísia, Martinelli Antônio, Cabral Kleber, Dantas André et al. (2022-08)
    Thermal Performance of Cement-Leca Composites for 3D Printing
  293. Zhou Wen, McGee Wesley, Zhu He, Gökçe H. et al. (2022-08)
    Time-Dependent Fresh Properties Characterization of 3D Printing Engineered Cementitious Composites:
    On the Evaluation of Buildability
  294. Wang Li, Xiao Wei, Wang Qiao, Jiang Hailong et al. (2022-07)
    Freeze-Thaw-Resistance of 3D Printed Composites with Desert Sand
  295. Zhang Hongping, Liu Yaling, Cheng Zhi, Zhao Zhiyi (2022-07)
    Effect of Layering Molding Process on Strength of 3D Printed Composite Cement-Based Materials
  296. Wang Li, Li Qiqi, Hu Yuanyuan, Cui Tianlong et al. (2022-07)
    Shrinkage and Cracking Properties of Cellulose-Fiber-Concrete Composites for 3D Printing by Leveraging Internal Curing
  297. Zhu Binrong, Pan Jinlong, Li Junrui, Wang Penghui et al. (2022-07)
    Relationship Between Microstructure and Strain-Hardening Behavior of 3D Printed Engineered Cementitious Composites
  298. Čítek David, Rehacek Stanislav, Dobias Daniel (2022-07)
    Experimental Research on 3D Printed Construction from Cement-Based Composites
  299. Singh Amardeep, Chen Zhiyuan, Duan Zhenhua, Li Lei (2022-07)
    Utilization Potential of Steel-Fibers in 3D Printed Functionally Graded Cementitious Composite:
    An Experimental Approach
  300. Dulaj Albanela, Suijs Monica, Salet Theo, Lucas Sandra (2022-06)
    Incorporation and Characterization of Multi-Walled Carbon Nanotube Concrete Composites for 3D Printing Applications
  301. Bong Shin, Nematollahi Behzad, Nerella Venkatesh, Mechtcherine Viktor (2022-06)
    Properties of 3D Printable Ductile Fiber-Reinforced Geopolymer Composite
  302. Reiter Lex, Anton Ana-Maria, Wangler Timothy, Dillenburger Benjamin et al. (2022-06)
    A 3D Printing Platform for Reinforced Printed-Sprayed Concrete Composites
  303. Nefs Karsten, Overmeir Anne, Salet Theo, Suiker Akke et al. (2022-06)
    Consistency of Mechanical Properties of 3D Printed Strain-Hardening Cementitious Composites Within One Printing System
  304. Dvorkin Leonid, Marchuk Vitaliy, Hager Izabela, Maroszek Marcin (2022-06)
    Design of Cement-Slag Concrete Composition for 3D Printing
  305. Jin Yuan, Xu Jiabin, Li Yali, Zhao Zhihui et al. (2022-06)
    Rheological Properties, Shape Stability and Compressive Strength of 3D Printed Colored Cement Composites Modified by Needle-Like Pigment
  306. Hao Lucen, Xiao Jianzhuang, Sun Jingting, Xia Bing et al. (2022-06)
    Thermal Conductivity of 3D Printed Concrete With Recycled Fine Aggregate Composite Phase-Change-Materials
  307. Danish Aamar, Khurshid Kiran, Mosaberpanah Mohammad, Ozbakkaloglu Togay et al. (2022-06)
    Micro-Structural Characterization, Driving Mechanisms, and Improvement-Strategies for Inter-Layer Bond Strength of Additive Manufactured Cementitious Composites:
    A Review
  308. Xu Nuoyan, Qian Ye, Yu Jing, Leung Christopher (2022-05)
    Tensile Performance of 3D Printed Strain-Hardening Cementitious Composites Considering Material-Parameters, Nozzle-Size and Printing-Pattern
  309. Geng Zifan, Pan Hao, Zuo Wenqiang, She Wei (2022-05)
    Functionally Graded Lightweight Cement-Based Composites with Outstanding Mechanical Performances via Additive Manufacturing
  310. Zhang Chao, Jia Zijian, Wang Xianggang, Jia Lutao et al. (2022-05)
    A Two-Phase Design-Strategy Based on the Composite of Mortar and Coarse Aggregate for 3D Printable Concrete with Coarse Aggregate
  311. Ivaniuk Egor, Eichenauer Martin, Tošić Zlata, Müller Steffen et al. (2022-05)
    3D Printing and Assembling of Frame Modules Using Printable Strain-Hardening Cement-Based Composites
  312. Zhao Zhihui, Chen Mingxu, Jin Yuan, Lu Lingchao et al. (2022-05)
    Rheology-Control Towards 3D Printed Magnesium-Potassium-Phosphate-Cement Composites
  313. Barbosa Marcella, Anjos Marcos, Cabral Kleber, Souza Dias Leonardo (2022-05)
    Development of Composites for 3D Printing with Reduced Cement Consumption
  314. Aslani Farhad, Dale Ryan, Hamidi Fatemeh, Valizadeh Afsaneh (2022-05)
    Mechanical and Shrinkage Performance of 3D Printed Rubberised Engineered Cementitious Composites
  315. Yang Rijiao, Zeng Qiang, Peng Yu, Wang Hailong et al. (2022-05)
    Anomalous Matrix and Inter-Layer Pore-Structure of 3D Printed Fiber-Reinforced Cementitious Composites
  316. Zhou Wen, Zhang Yamei, Ma Lei, Li Victor (2022-04)
    Influence of Printing Parameters on 3D Printing Engineered Cementitious Composites
  317. Wang Lining, Aslani Farhad, Mukherjee Abhijit (2022-04)
    Development of 3D Printable Self-Sensing Cementitious Composites
  318. Bedarf Patrick, Szabó Anna, Zanini Michele, Heusi Alex et al. (2022-04)
    Robotic 3D Printing of Mineral Foam for a Lightweight Composite Concrete Slab
  319. Uhlík Adam, Buch Mário, Unčík Stanislav (2022-04)
    Effecting the Rheological Properties of Composites for 3D Printing Technology in Construction
  320. Fuente Albert, Blanco Ana, Galeote Eduardo, Cavalaro Sergio (2022-04)
    Structural Fiber-Reinforced Cement-Based Composite Designed for Particle-Bed 3D Printing Systems:
    Case Study Parque De Castilla Footbridge in Madrid
  321. Chen Mingxu, Li Haisheng, Yang Lei, Wang Shoude et al. (2022-03)
    Rheology and Shape-Stability-Control of 3D Printed Calcium-Sulphoaluminate-Cement Composites Containing Paper-Milling-Sludge
  322. Brooks Adam, He Yawen, Farzadnia Nima, Seyfimakrani Shayan et al. (2022-03)
    Incorporating PCM-Enabled Thermal Energy Storage into 3D Printable Cementitious Composites
  323. Filho Fernando, Chen Yu, Çopuroğlu Oğuzhan (2022-03)
    Nano-Modification in Digital Manufacturing of Cementitious Composites
  324. Ivaniuk Egor, Ivanova Irina, Sokolov Dmitrii, Tošić Zlata et al. (2022-02)
    Application-Driven Material-Design of Printable Strain-Hardening Cementitious Composites
  325. Overmeir Anne, Figueiredo Stefan, Šavija Branko, Bos Freek et al. (2022-02)
    Design and Analyses of Printable Strain-Hardening Cementitious Composites with Optimized Particle-Size-Distribution
  326. Ismail Nur, Ibrahim Mustaffa, Abdullah Siti (2022-01)
    Compressive Strength of 3D Printing Bio-Composites Mortar
  327. Zhou Jiehang, Lai Jianzhong, Du Longyu, Wu Kai et al. (2021-12)
    Effect of Directionally Distributed Steel-Fiber on Static and Dynamic Properties of 3D Printed Cementitious Composite
  328. Wu Zixia, Xu Yading, Šavija Branko (2021-12)
    Mechanical Properties of Lightweight Cementitious Cellular Composites Incorporating Micro-Encapsulated Phase-Change-Material
  329. Wanasinghe Dimuthu, Aslani Farhad, Ma Guowei (2021-12)
    Development of 3D Printable Cementitious Composite for Electromagnetic Interference Shielding
  330. Cai Jingming, Sheng Zhaoliang, Wang Xiaoyi, Fang Yizhi et al. (2021-12)
    Effect of Reinforcement-Configurations on the Flexural Behaviors of 3D Printed Fiber-Reinforced Cementitious Composite Beams
  331. Kilic Ugur, Yang Yang, Ma Ji, Ozbulut Osman (2021-12)
    Rheological and Thermal Characterization of 3D Printable Lightweight Cementitious Composites with Fly-Ash-Cenospheres
  332. Rutzen Matthias, Schulz Michael, Moosburger-Will Judith, Lauff Philipp et al. (2021-11)
    3D Printing as an Automated Manufacturing Method for a Carbon-Fiber-Reinforced Cementitious Composite with Outstanding Flexural Strength (105 N/mm²)
  333. Sun Xiaoyan, Zhou Jiawei, Wang Qun, Shi Jiangpeng et al. (2021-11)
    PVA-Fiber-Reinforced High-Strength Cementitious Composite for 3D Printing:
    Mechanical Properties and Durability
  334. Liu Hanqiu, Egbe King-James, Wang Haipeng, Nazar Ali et al. (2021-11)
    A Numerical Study on 3D Printed Cementitious Composites Mixes Subjected to Axial Compression
  335. Pham Luong, Panda Biranchi, Tran Jonathan (2021-11)
    Fresh and Hardened Properties of 3D Printable Polymer-Fiber-Reinforced High-Performance Cementitious Composite
  336. Zhang Hongping, Wang Jianhong, Liu Yaling, Zhang Xiaoshuang et al. (2021-11)
    Effect of Processing Parameters on the Printing Quality of 3D Printed Composite Cement-Based Materials
  337. Becker Mirco (2021-11)
    Felt-Concrete Composites in Architecture and Design
  338. Markin Slava, Schröfl Christof, Blankenstein Paul, Mechtcherine Viktor (2021-11)
    Three-Dimensional-Printed Wood-Starch Composite as Support Material for 3D Concrete Printing
  339. Yuan Qiang, Zuo Shenghao, Li Zemin, Shi Caijun et al. (2021-11)
    Optimizing Three-Dimensional Printing Binder Composed of Ordinary-Portland-Cement and Calcium-Sulfoaluminate-Cement with Retarders
  340. Zhu He, Yu Kequan, McGee Wesley, Ng Tsz et al. (2021-11)
    Limestone-Calcined-Clay-Cement for Three-Dimensional Printed Engineered Cementitious Composites
  341. Ge Zhi, Tawfek Abdullah, Zhang Hongzhi, Yang Yongwei et al. (2021-09)
    Influence of an Extrusion-Approach on the Fiber-Orientation and Mechanical Properties of Engineering Cementitious Composite
  342. Zhang Ping, Lu Xiao-jun (2021-09)
    Study on Bending Strength of Cementitious Composites Based on Fiber-Alignment
  343. Choi Se-Jin, Kim Ji-Hwan, Jeong Hyojin, Lee Ja-Sung et al. (2021-08)
    Simulated and Experimental Investigation of the Mechanical Properties and Solubility of 3D Printed Capsules for Self-Healing Cement Composites
  344. Zhang Yifan, Aslani Farhad (2021-08)
    Development of Fiber-Reinforced Engineered Cementitious Composite Using Polyvinyl-Alcohol-Fiber and Activated Carbon-Powder for 3D Concrete Printing
  345. Putten Jolien, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-08)
    Development of 3D Printable Cementitious Composites with the Incorporation of Polypropylene Fibers
  346. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2021-08)
    In-Process Reinforcing Method:
    Dual 3D Printing Procedure for Ultra-High-Performance Concrete Reinforced Cementitious Composites
  347. Zhao Zhihui, Chen Mingxu, Zhong Xu, Huang Yongbo et al. (2021-07)
    Effects of Bentonite, Diatomite and Metakaolin on the Rheological Behavior of 3D Printed Magnesium-Potassium-Phosphate-Cement Composites
  348. Wang Li, Ma Hui, Li Zhijian, Ma Guowei et al. (2021-07)
    Cementitious Composites Blending with High Belite-Sulfoaluminate and Medium-Heat Portland Cements for Large-Scale 3D Printing
  349. Suntharalingam Thadshajini, Upasiri Irindu, Gatheeshgar Perampalam, Poologanathan Keerthan et al. (2021-07)
    Fire-Resistance of 3D Printed Concrete Composite Wall Panels Exposed to Various Fire Scenarios
  350. Sun Junbo, Aslani Farhad, Lu Jenny, Wang Lining et al. (2021-06)
    Fiber-Reinforced Lightweight Engineered Cementitious Composites for 3D Concrete Printing
  351. Bakhshi Amir, Sedghi Reza, Hojati Maryam (2021-06)
    A Preliminary Study on the Mix-Design of 3D Printable Engineered Cementitious Composite
  352. Suntharalingam Thadshajini, Gatheeshgar Perampalam, Upasiri Irindu, Poologanathan Keerthan et al. (2021-06)
    Fire Performance of Innovative 3D Printed Concrete Composite Wall Panels:
    A Numerical Study
  353. Song Hongwei, Li Xinle (2021-05)
    An Overview on the Rheology, Mechanical Properties, Durability, 3D Printing, and Microstructural Performance of Nanomaterials in Cementitious Composites
  354. Cuevas Villalobos Karla, Chougan Mehdi, Martin Falk, Ghaffar Seyed et al. (2021-05)
    3D Printable Lightweight Cementitious Composites with Incorporated Waste-Glass-Aggregates and Expanded Microspheres:
    Rheological, Thermal and Mechanical Properties
  355. Tarhan Yeşim, Craveiro Flávio, Bártolo Helena (2021-05)
    An Effective Solution for Reinforcing 3D Concrete Printable Composites
  356. Zhang Hao, Zhu Liming, Zhang Fan, Yang Mijia (2021-04)
    Effect of Fiber Content and Alignment on the Mechanical Properties of 3D Printing Cementitious Composites
  357. Brooks Adam, Zhou Hongyu (2021-04)
    Developing 3D Printable Lightweight Functional Cementitious Composite
  358. Zhu Binrong, Pan Jinlong, Zhou Zhenxin, Cai Jingming (2021-04)
    Mechanical Properties of Engineered Cementitious Composites Beams Fabricated by Extrusion-Based 3D
  359. Bedarf Patrick, Schulte Dinorah, Şenol Ayça, Jeoffroy Etienne et al. (2021-04)
    Robotic 3D Printing of Mineral Foam for a Lightweight Composite Facade Shading Panel
  360. Kilic Ugur, Jiang Zhangfan, Ma Ji, Ozbulut Osman (2021-03)
    Printability Characterization of Graphene-Reinforced Cementitious Composites
  361. Zhao Zhihui, Chen Mingxu, Xu Jiabin, Li Laibo et al. (2021-03)
    Mix-Design and Rheological Properties of Magnesium-Potassium-Phosphate Cement Composites Based on the 3D Printing-Extrusion-System
  362. Rutzen Matthias, Lauff Philipp, Niedermeier Roland, Fischer Oliver et al. (2021-03)
    Influence of Fiber-Alignment on Pseudoductility and Micro-Cracking in a Cementitious Carbon-Fiber Composite Material
  363. Sikora Paweł, Chougan Mehdi, Cuevas Villalobos Karla, Liebscher Marco et al. (2021-02)
    The Effects of Nano- and Micro-Sized Additives on 3D Printable Cementitious and Alkali-Activated Composites:
    A Review
  364. Yu Kequan, McGee Wesley, Ng Tsz, Zhu He et al. (2021-02)
    3D Printable Engineered Cementitious Composites:
    Fresh and Hardened Properties
  365. Long Wujian, Lin Can, Tao Jie-Lin, Ye Taohua et al. (2021-02)
    Printability and Particle-Packing of 3D Printable Limestone-Calcined-Clay-Cement Composites
  366. Archez Julien, Maitenaz Sébastien, Demont Léo, Charrier Malo et al. (2021-02)
    Strategy to Shape, on a Half-Meter Scale, a Geopolymer Composite Structure by Additive Manufacturing
  367. Demont Léo, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2021-01)
    Flow-Based Pultrusion of Continuous Fibers for Cement-Based Composite Material and Additive Manufacturing:
    Rheological and Technological Requirements
  368. Baz Bilal, Rémond Sébastien, Aouad Georges (2021-01)
    Influence of the Mix Composition on the Thixotropy of 3D Printable Mortars
  369. Chen Mingxu, Yang Lei, Zheng Yan, Li Laibo et al. (2021-01)
    Rheological Behaviors and Structure Build-Up of 3D Printed Polypropylene- and Polyvinyl-Alcohol-Fiber-Reinforced Calcium-Sulphoaluminate-Cement Composites
  370. Šavija Branko (2020-09)
    Use of 3D Printing to Create Multi-Functional Cementitious Composites:
    Review, Challenges and Opportunities
  371. Sambucci Matteo, Marini Danilo, Sibai Abbas, Valente Marco (2020-08)
    Preliminary Mechanical Analysis of Rubber-Cement Composites Suitable for Additive Process Construction
  372. Archez Julien, Texier-Mandoki N., Bourbon X., Caron Jean-François et al. (2020-08)
    Adaptation of the Geopolymer Composite Formulation Binder to the Shaping Process
  373. Gardner Guy, Forward Kristen, Tse Kim, Sharma Karan (2020-07)
    Rapid Composite Formwork:
    An Automated and Customizable Process for Freeform Concrete Through Computational Design and Robotic Fabrication
  374. Sambucci Matteo, Valente Marco, Sibai Abbas, Marini Danilo et al. (2020-07)
    Rubber-Cement Composites for Additive Manufacturing:
    Physical, Mechanical and Thermo-Acoustic Characterization
  375. McGee Wesley, Ng Tsz, Yu Kequan, Li Victor (2020-07)
    Extrusion Nozzle Shaping for Improved 3DP of Engineered Cementitious Composites (ECC-SHCC)
  376. Xu Yading, Schlangen Erik, Šavija Branko (2020-07)
    Auxetic Behavior of Cementitious Cellular Composites under Uniaxial Compression and Cyclic Loading
  377. Figueiredo Stefan, Overmeir Anne, Nefs Karsten, Schlangen Erik et al. (2020-07)
    Quality-Assessment of Printable Strain-Hardening Cementitious Composites Manufactured in Two Different Printing Facilities
  378. Skibicki Szymon, Kaszyńska Maria, Wahib Nawid, Techman Mateusz et al. (2020-07)
    Properties of Composite Modified with Limestone-Powder for 3D Concrete Printing
  379. Claßen Martin, Ungermann Jan, Sharma Rahul (2020-05)
    Additive Manufacturing of Reinforced Concrete:
    Development of a 3D Printing Technology for Cementitious Composites with Metallic Reinforcement
  380. Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2020-05)
    Mechanical Behavior of Printed Strain-Hardening Cementitious Composites
  381. Chen Mingxu, Yang Lei, Zheng Yan, Huang Yongbo et al. (2020-04)
    Yield-Stress and Thixotropy-Control of 3D Printed Calcium-Sulfoaluminate Cement Composites with Metakaolin Related to Structural Build-Up
  382. Xu Yading, Zhang Hongzhi, Schlangen Erik, Luković Mladena et al. (2020-04)
    Cementitious Cellular Composites with Auxetic Behavior
  383. Li Victor, Bos Freek, Yu Kequan, McGee Wesley et al. (2020-04)
    On the Emergence of 3D Printable Engineered, Strain-Hardening Cementitious Composites
  384. Chougan Mehdi, Ghaffar Seyed, Jahanzat Mohammad, Albar Abdulrahman et al. (2020-04)
    The Influence of Nano-Additives in Strengthening Mechanical Performance of 3D Printed Multi-Binder Geopolymer Composites
  385. Ma Guowei, Salman Nazar, Wang Li, Wang Fang (2020-02)
    A Novel Additive Mortar Leveraging Internal Curing for Enhancing Inter-Layer Bonding of Cementitious Composite for 3D Printing
  386. Li Zhijian, Wang Li, Ma Guowei (2020-01)
    Mechanical Improvement of Continuous Steel-Micro-Cable-Reinforced Geopolymer Composites for 3D Printing Subjected to Different Loading Conditions
  387. Kosson Michael, Brown Lesa, Sanchez Florence (2020-01)
    Early-Age Performance of 3D Printed Carbon-Nano-Fiber and Carbon Micro-Fiber Cement Composites
  388. Chen Mingxu, Liu Bo, Li Laibo, Cao Lidong et al. (2020-01)
    Rheological Parameters, Thixotropy and Creep of 3D Printed Calcium-Sulfoaluminate-Cement Composites Modified by Bentonite
  389. Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schneider Kai et al. (2019-11)
    Mineral-Impregnated Carbon-Fiber Composites as Novel Reinforcement for Concrete Construction:
    Material and Automation Perspectives
  390. Silva Guido, Quispe L., Kim Suyeon, Nakamatsu Javier et al. (2019-11)
    Development of a Stabilized Natural Fiber-Reinforced Earth Composite for Construction Applications Using 3D Printing
  391. Bong Shin, Nematollahi Behzad, Xia Ming, Nazari Ali et al. (2019-09)
    Properties of 3D Printable Ductile Fiber-Reinforced Geopolymer Composite for Digital Construction Applications
  392. Long Wujian, Tao Jie-Lin, Lin Can, Gu Yucun et al. (2019-08)
    Rheology and Buildability of Sustainable Cement-Based Composites Containing Micro-Crystalline Cellulose for 3D Printing
  393. Zhu Binrong, Pan Jinlong, Nematollahi Behzad, Zhou Zhenxin et al. (2019-07)
    Development of 3D Printable Engineered Cementitious Composites with Ultra-High Tensile Ductility for Digital Construction
  394. Xu Yading, Šavija Branko (2019-06)
    Development of Strain-Hardening Cementitious Composite (SHCC) Reinforced with 3D Printed Polymeric Reinforcement:
    Mechanical Properties
  395. Hamidi Fatemeh, Aslani Farhad (2019-05)
    Additive Manufacturing of Cementitious Composites:
    Materials, Methods, Potentials, and Challenge
  396. Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2019-03)
    An Approach to Develop Printable Strain-Hardening Cementitious Composites
  397. Nam Young, Hwang Young, Park Ji, Lim Yun (2019-02)
    Fiber-Reinforced Cementitious Composite Design with Controlled Distribution and Orientation of Fibers Using Three-Dimensional Printing Technology
  398. Ma Guowei, Li Zhijian, Wang Li, Wang Fang et al. (2019-01)
    Mechanical Anisotropy of Aligned Fiber-Reinforced Composite for Extrusion-Based 3D Printing
  399. Weng Yiwei, Li Mingyang, Liu Zhixin, Lao Wenxin et al. (2018-12)
    Printability and Fire Performance of a Developed 3D Printable Fiber-Reinforced Cementitious Composites under Elevated Temperatures
  400. Ma Guowei, Li Zhijian, Wang Li, Bai Gang (2018-10)
    Micro-Cable-Reinforced Geopolymer Composite for Extrusion-Based 3D Printing
  401. Weng Yiwei, Lu Bing, Li Mingyang, Liu Zhixin et al. (2018-09)
    Empirical Models to Predict Rheological Properties of Fiber-Reinforced Cementitious Composites for 3D Printing
  402. Bao Yi, Xu Mingfeng, Soltan Daniel, Xia Tian et al. (2018-09)
    Three-Dimensional Printing Multifunctional Engineered Cementitious Composites (ECC) for Structural Elements
  403. Yu Jing, Leung Christopher (2018-09)
    Impact of 3D Printing-Direction on Mechanical Performance of Strain-Hardening Cementitious Composite (SHCC)
  404. Ma Guowei, Sun Junbo, Wang Li, Aslani Farhad et al. (2018-09)
    Electromagnetic and Microwave-Absorbing Properties of Cementitious Composite for 3D Printing Containing Waste Copper Solids
  405. Ogura Hiroki, Nerella Venkatesh, Mechtcherine Viktor (2018-08)
    Developing and Testing of Strain-Hardening Cement-Based Composites (SHCC) in the Context of 3D Printing
  406. Lim Jian, Panda Biranchi, Pham Quang-Cuong (2018-05)
    Improving Flexural Characteristics of 3D Printed Geopolymer Composites with In-Process Steel-Cable-Reinforcement
  407. Weng Yiwei, Qian Shunzhi, He Lewei, Li Mingyang et al. (2018-05)
    3D Printable High-Performance Fiber-Reinforced Cementitious Composites For Large-Scale Printing
  408. Yeon Kyu-Seok, Kim Kwan, Yeon Jaeheum (2018-05)
    Feasibility Study of the Use of Polymer-Modified Cement Composites as 3D Concrete Printing-Material
  409. Soltan Daniel, Li Victor (2018-03)
    A Self-Reinforced Cementitious Composite for Building-Scale 3D Printing
  410. Nam Young, Hwang Young, Park Ji, Lim Yun (2018-02)
    Feasibility Study to Control Fiber-Distribution for Enhancement of Composite Properties via Three-Dimensional Printing
  411. Dubois Vincent, Leblanc Alexandre, Carpentier Olivier, Alhaik Ghaith et al. (2018-01)
    Performances of Flax Shive-Based Lightweight Composites with Rapid Hardening
  412. Villacis N., Gualavisi M., Narváez-Muñoz Christian, Carrión L. et al. (2017-11)
    Additive Manufacturing of a Rheological Characterized Cement-Based Composite Material
  413. Nam Young, Park Ji, Yoon Seung, Lim Yun (2016-06)
    3D Printing of Fibers and Reinforcements for Cementitious Composites to Maximize the Fracture-Resisting Performance of FRCCs
  414. Gibbons Gregory, Williams Reuben, Purnell Phil, Farahi Elham (2013-07)
    3D Printing of Cement Composites
  415. Takashima Hiroyuki, Miyagai Kiyotaka, Hashida Toshiyuki, Li Victor (2002-09)
    A Design Approach for the Mechanical Properties of Polypropylene-Discontinuous-Fiber-Reinforced Cementitious Composites by Extrusion-Molding