Hebda Marek¶

1. Maroszek Marcin, Rudziewicz Magdalena, Shah Syed, Tran Doan et al. (2025-11)
   Development of Eco-Friendly Construction Materials for 3D Printing Using Fly Ash and Demolition Waste
2. Maroszek Marcin, Rudziewicz Magdalena, Hebda Marek (2025-09)
   Recycled Components in 3D Concrete Printing Mixes:
   A Review
3. Rudziewicz Magdalena, Maroszek Marcin, Hebda Marek (2025-09)
   Comparison of Porosity and Thermal Conductivity of Concrete and Alkali-Activated Hybrid Binders in 3D-Printed Fiber-Reinforced Foamed Composites
4. Maroszek Marcin, Rudziewicz Magdalena, Rusin-Żurek Karina, Hager Izabela et al. (2025-09)
   Recycled Materials and Lightweight Insulating Additions to Mixtures for 3D Concrete Printing
5. Maroszek Marcin, Hager Izabela, Mróz Katarzyna, Sitarz Mateusz et al. (2025-08)
   Anisotropy of Mechanical Properties of 3D-Printed Materials:
   Influence of Application Time of Subsequent Layers
6. Rudziewicz Magdalena, Hutyra Adam, Maroszek Marcin, Korniejenko Kinga et al. (2025-04)
   3D-Printed Lightweight Foamed Concrete with Dispersed Reinforcement
7. Rudziewicz Magdalena, Maroszek Marcin, Hutyra Adam, Góra Michał et al. (2025-02)
   Influence of Foaming Agents and Stabilizers on Porosity in 3D Printed Foamed Concrete
8. Maroszek Marcin, Rudziewicz Magdalena, Hutyra Adam, Dziura Paweł et al. (2024-12)
   Evaluation of 3D Concrete Printing Extrusion-Efficiency
9. Rudziewicz Magdalena, Maroszek Marcin, Setlak (nee Pławecka) Kinga, Góra Mateusz et al. (2024-08)
   Optimization of Foams-Polypropylene Fiber-Reinforced Concrete Mixtures Dedicated for 3D Printing
10. Rudziewicz Magdalena, Maroszek Marcin, Góra Mateusz, Dziura Paweł et al. (2023-09)
    Feasibility Review of Aerated Materials Application in 3D Concrete Printing
11. Marczyk Joanna, Ziejewska Celina, Korniejenko Kinga, Łach Michał et al. (2022-09)
    Properties of 3D Printed Concrete-Geopolymer Hybrids Reinforced with Aramid Roving
12. Hager Izabela, Maroszek Marcin, Mróz Katarzyna, Kęsek Rafał et al. (2022-06)
    Inter-Layer Bond Strength Testing in 3D Printed Mineral Materials for Construction Applications
13. Ziejewska Celina, Marczyk Joanna, Korniejenko Kinga, Bednarz Sebastian et al. (2022-04)
    3D Printing of Concrete-Geopolymer Hybrids
14. Marczyk Joanna, Ziejewska Celina, Gądek Szymon, Korniejenko Kinga et al. (2021-11)
    Hybrid Materials Based on Fly-Ash, Metakaolin, and Cement for 3D Printing
15. Korniejenko Kinga, Łach Michał, Chou S., Lin Wei-Ting et al. (2019-11)
    A Comparative Study of Mechanical Properties of Fly-Ash-Based Geopolymer Made by Casted and 3D Printing Methods
16. Marczyk Joanna, Ziejewska Celina, Łach Michał, Korniejenko Kinga et al. (2019-11)
    Possibilities of Using the 3D Printing Process in the Concrete and Geopolymers Application