Skip to content

#temperature

Keywords by Co - Occurrence

  1. Wang Huai, Li Xiulin, Gong Hao, Wang Peijun et al. (2026-04)
    Thermal and Mechanical Properties of 3D Printed Lightweight Hollow Glass Microsphere Aggregate Concrete
  2. Dewi Melati, Wang Wei-Chien, Lin Wei-Ting (2026-03)
    Development of Low-Thermal-Conductivity Fly Ash Geopolymer Foam Mortars with Stabilizer Effects and 3D Printability Assessment
  3. Ekinci Mehmet, Belendir Utku, Demiral Nazim, Şahin Oğuzhan et al. (2026-03)
    Sustainable Lightweight Thermal Insulating Geopolymer Mortars from End-of-Life Materials for 3D Printing.
  4. Joda Akram, Mansouri Abraham, Abdullahi Ahmed, Elgaali Elgaali et al. (2026-03)
    Parametric Analysis of Infill Geometry and Density for Thermally Efficient 3D-Printed Concrete
  5. Cheng Hanbin, Duarte José, Memari Ali, Bilén Sven et al. (2026-02)
    Recycled Cork Aggregate for 3D Concrete Printing:
    Rheology, Pore-Driven Anisotropy Mitigation, and Low-Carbon Thermal Buffering
  6. Iozzino Fabio, Fragnito Andrea, Mauro Gerardo, Roselli Carlo (2026-02)
    Preliminary Optimization of Steady-State and Dynamic Thermal Performance of 3D Printed Foamed Concrete
  7. Ma Siqi, Zhang Feng, Fu Shuai, Min Benzhi et al. (2026-02)
    Bioinspired Multilayer Barriers of 3D-Printed Lunar Regolith Simulant-Based Geopolymers for Mechanical and Thermal Protection
  8. Shen Jianyu, Cheng Yaofei, Xiao Jianzhuang, Wang Bo et al. (2026-01)
    Thermal and Mechanical Performance of 3D-Printed Excavated Soil Wall Solidified by Alkali-Activated Slag
  9. Bihari Ádám, Nemes Rita (2026-01)
    Investigation of Water Vapor Adsorption and Thermal Conductivity Properties of Stabilized Earth Mixtures for the Construction of 3D Printed Wall Structures
  10. Robens-Radermacher Annika, Schmidt Wolfram, Unger Jörg, Mezhov Alexander (2026-01)
    Characterization of Temperature Influence on the Structural Build-Up of 3D Printed Concrete
  11. Gencel Osman, Er Yusuf, Güler Onur, Ustaoğlu Abid et al. (2026-01)
    Replacing Natural Aggregates with Phase Change Material-Based 3D Printed Aggregates in Concrete for Structural Function and Dual Thermal Energy Storage
  12. Chen Guixiang, Zhang Xuanzheng, Wang Jun, Hu Kui et al. (2026-01)
    Anisotropy and Mechanical Enhancement of 3D-Printed Vitrified Microsphere Thermal Insulation Mortar Incorporating Basalt Fiber Under Different Printing Paths
  13. Singh Amardeep, Sun Jingting, Qi Deng, Abden Md et al. (2026-01)
    Evaluating Glass Powder Substitution for 3D Printed Concrete:
    Effects on Thermal Properties and Embodied Carbon
  14. Valdez-Cano R., González-López J., De-Los-Santos E., Mendoza‐Rangel J. et al. (2026-01)
    Alternative Silica Aerogel Mortar for Improving Energy Efficiency, Thermal Comfort, and Environmental Performance in Residential Buildings Under Hot-Dry Climates Using 3D Additive Manufacturing
  15. Cárdenas Valeria, Parmigiani Silvia, Vargas Juan, Restuccia Luciana et al. (2026-01)
    Incorporation of Vitrified Ashes in Lightweight Foamed Concrete for 3D Printing:
    Thermal and Mechanical Assessment
  16. Wang Hanmo, Wan Yujia, Owyong Shawn, Connie Lim En et al. (2026-01)
    Towards Low-Carbon Construction:
    Nature-Inspired Internal Patterns for Thermal Insulation in Lightweight Concrete Component Cast Using 3D-Printed Formwork
  17. Alvarez Eduardo, Curth Alexander, Mueller Caitlin, Norford Leslie (2026-01)
    Enhancing the Dynamic Thermal Performance of Wall Components Through Shape Optimization:
    Method and Application to Extruded Blocks and 3D-Printed Walls
  18. Ding Tao, Wei Jun, Sun Jingting, Feng Kaikai (2025-12)
    Experimental Study on Thermal Properties of 3D Printed Concrete with Recycled Sand and Powder
  19. Cárdenas Valeria, Vargas Juan, Fantucci Stefano (2025-12)
    Topological Optimization and Material Exploration for Improving the Thermal Performance of 3D Printed Prefabricated Wall Components
  20. Latorraca Tássia, Rangel Bárbara, Guimarães Ana (2025-12)
    Optimizing 3D-Printed Concrete Panels’ Thermal Performance with Materials, Metrics, and Generative Design
  21. Feliciano Renzo, Barrera Natalia, Lukyanenko Artyom, Rangel Bárbara et al. (2025-12)
    Sustainable Geometries:
    A Comparative Analysis of Thermal Performance in Uninsulated 3D Printed Concrete Wall Topologies
  22. Wang Jinjin, Li Shouzhen, Qiu Jin, Chen Cheng et al. (2025-12)
    Experimental Investigation on Thermal Performance of 3D Printed Concrete Elements Subjected to Radiant Heating
  23. Cheng Jianhua, Chen Meng, Ge Yulin, Zhang Tong (2025-12)
    Mechanical Behavior and Damage Evolution of 3D-Printed Engineered Cementitious Composites at Elevated Temperatures:
    Insights from Acoustic Emission Characterization
  24. Nermend Loran, Skibicki Szymon, Techman Mateusz, Federowicz Karol et al. (2025-12)
    Electrical Resistivity and Elevated Temperature Performance of 3D Printed Concrete Containing Nanosized Radiation Shielding Admixtures
  25. Mansouri Abraham, Mourad Bahaa, Birhane Bezawit, Denbel Nuhamin et al. (2025-11)
    Noncontact Measurement of Thermal Resistance in 3D Concrete Printing Building Envelopes Using Infrared Sensing and Arduino
  26. Wang Zherui, Teitelbaum E., Akbarzadeh Masoud, Aviv D. (2025-11)
    Experimental Assessment on Thermal Mass Performance of Structurally Optimized, 3D-Printed Concrete Floor Element for Carbon Emission Reduction
  27. Vargas José, Breseghello Luca, Silfwerbrand Johan (2025-11)
    Circular Hybrid Façades:
    Responsive Design of Thermally Efficient 3D Printed Concrete Skins on Reused Concrete Elements
  28. Geng Renyu, Jiang Jinming, Du Pengcong, Zhang Huiliang et al. (2025-11)
    Multiscale Thermal Optimization of 3D-Printed Walls:
    Integrating Structure, Material, and Process with Fire-Thermal Synergy
  29. Davar Saeed, Ma Zhanguo (2025-11)
    Improving the Mechanical Performance of 3D-Printed UHPFRC with Thermally Modified Carbon Fibers
  30. Liu Xianda, Sun Junbo, Chen Hui, Liu Chang et al. (2025-11)
    3D Printed Concrete with Red Mud Incorporation:
    Influence of Red Mud Manufacturing Procedures on Mechanical Properties at Elevated Temperatures
  31. Zhu Xiaowei, Zhang Xudong, Zhang Jicheng, Chen Miao et al. (2025-11)
    Study on Anisotropic Thermal and Mechanical Properties of 3D-Printed Scrap-Aerogel-Incorporated Concrete
  32. Wang Huai, Li Xiulin, Gong Hao, Xu Jingjie et al. (2025-10)
    Thermal and Mechanical Properties of 3D-Printed Fiber-Reinforced Lightweight Concrete Based on Air Entrainment and Hollow Glass Microspheres
  33. Boldini Alain, Giwa Ilerioluwa, Kamel Ehsan, Kazemian Ali (2025-10)
    Spatiotemporal Temperature Prediction in 3D-Printed Sulfur Concrete for Automated Construction on Earth and Beyond
  34. Rudziewicz Magdalena, Maroszek Marcin, Hebda Marek (2025-09)
    Comparison of Porosity and Thermal Conductivity of Concrete and Alkali-Activated Hybrid Binders in 3D-Printed Fiber-Reinforced Foamed Composites
  35. Liu Ruiqing, Du Hongjian (2025-09)
    Optimizing Thermal Insulation Through Geometric Design:
    Comparative Analysis of Normal and Lightweight 3D Printed Concrete Wall Patterns
  36. Xing Wenjing, Li Zhengrong (2025-09)
    Quantifying the Heterogeneous Anisotropic Thermal Performance of Extrusion-Based 3D Printed Structures:
    A Multiscale Computational Approach
  37. Arumugam Girirajan, Kusumo Camerlia May Li, Mari Tamil (2025-09)
    Impact of Bioinspired Infill Pattern on the Thermal and Energy Efficiency of 3D Concrete Printed Building Envelope
  38. Sikora Paweł, Skibicki Szymon, Bielawski Jakub, Techman Mateusz et al. (2025-09)
    Elevated Temperature Response and Fire Resistance Considerations of 3D-Printed Concrete:
    Small- to Medium-Scale Wall Experiments
  39. Daungwilailuk Totsawat, Pheinsusom Phoonsak, Pansuk Withit (2025-09)
    Behavior of 3D Printed Concrete Walls Exposed to High Temperatures
  40. Medeiros Fernanda, Anjos Marcos, Maia José, Dias Leonardo et al. (2025-08)
    Effect of Sisal Fibers on the Behavior of 3D-Printed Cementitious Mixtures Exposed to High Temperatures
  41. Cai Yilin, Hartell Julie, Aryal Ashrant (2025-07)
    Real-Time Multimodal Sensing System for Additive Construction by Extrusion:
    Integrating Thermal, Depth and RGB Data
  42. Sahebi Soleyman, Aslani Farhad (2025-07)
    Mechanical Strength and Heat Tolerance of 3D Printed Rubberised Concrete at Elevated Temperatures
  43. Ma Jinyi, Zhang Haiyan, Wang Yanzhi, Xiong Lu et al. (2025-07)
    Effect of Clay Brick Powder and Recycled Fine Aggregates on Properties of 3D Printed Concrete After High Temperature Exposure
  44. Kachalov A., Sánchez P., Mollah Md., Ezquerro J. et al. (2025-07)
    Numerical Analysis of Coaxially 3D Printed Lunar Habitats:
    Integrating Regolith and PCM for Passive Temperature Control
  45. Saad E., Correa David (2025-06)
    Thermal Performance Improvement of Brick Design via 3D Printing
  46. Hanifa Mohamad, Mendonça Paulo, Figueiredo Bruno, Mahdy Deena (2025-06)
    Experimental Study on the Thermal Performance of 3D-Printed Earthen Wall Segment with Optimized Infill Pattern
  47. Bajwa Asad, Samarasinghe Don, Flemmer Claire, Bao Ding (2025-06)
    A Systematic Literature Review on the Thermal Behaviour of Building Elements Constructed Through 3D Concrete Printing (3DCP)
  48. Tao Yaxin, Yuan Yong, Zhang Yi, Wangler Timothy (2025-06)
    Pore Structure Analysis of Printcrete Under Varying Temperature
  49. Radl Elisabeth, Pfleger Marc-Patrick, Sieh Alexander, Vill Markus (2025-06)
    Conceptual Design and Production of a 3D Printed Concrete Base Brick with Evaluation of Its Thermal Properties
  50. Ding Tao, Qu Changwei, Guo Dingming (2025-06)
    Thermal and Mechanical Properties of 3D Printed Functionally Graded Concrete:
    Utilizing Fibers and Recycled Aggregates as Gradient Components
  51. Rückrich Stefanie, Austern Guy, Denay Ofer, Seiwert Paul et al. (2025-05)
    3D-Printed Earth-Fiber Envelopes:
    Optimization of Thermal Performance and Industrial Applicability
  52. Zuo Zibo, Tao Yaxin, Huang Yulin, Zhang Longlong et al. (2025-04)
    Real-Time Temperature Monitoring to Evaluate the Strength Evolution of 3D Printed Concrete:
    From Lab to In-Situ Printing
  53. Sun Yifan, Ma Siqi, Chen Qingze, Chen Guoliang et al. (2025-04)
    Lunar Regolith Simulant-Derived 3D-Printed Geopolymers with Optimized Mechanical and Thermal Management Properties
  54. Qiao Zhigang, Li Hui, Wang Fei, Qi Yongle et al. (2025-04)
    Optimizing Thermal Energy Storage in 3D Printed Concrete with Hollow Ceramsite Composite Phase Change Materials
  55. Zhang Qiuju, Li Yujia, Huang Yuefan, Li Yangbo et al. (2025-04)
    Utilizing 3D Printing and Distributed Optic Fiber to Achieve Temperature-Sensitive Concrete
  56. Shen Jianyu, Ye Taohua, Xiao Jianzhuang, Li Shuisheng (2025-04)
    Mechanical and Thermal Properties of 3D Printed Earth Concrete Solidified by Geopolymers:
    A Study of Utilizing Excavated Clay
  57. Zhou Biao, Zhou Hongru, Yoshioka Hideki, Noguchi Takafumi et al. (2025-04)
    Mechanical and Microstructure Evolution of 3D Printed Concrete Interlayer at Elevated Temperatures
  58. Dey Dhrutiman, Panda Biranchi, Shukla Yash, Rawal Rajan (2025-03)
    A Comprehensive Assessment of Thermal Performance of 3D Printed Concrete Lattice Walls
  59. Ur Rehman Bajwa Asad, Samarasinghe Don, Flemmer Claire, Bao Ding (2025-03)
    Systematic Literature Review of the Evaluation of the Thermal Conductivity of 3D Concrete Printed Building Elements
  60. Şahin Hatice, Kaya Yahya, Akgümüş Fatih, Mardani Naz et al. (2025-03)
    Degradation of Mechanical Properties of 3D Fiber Reinforced Printed Concrete Mixtures Exposed to Elevated Temperatures
  61. Khanverdi Mohsen, Das Sreekanta (2025-03)
    Experimental Study on Water Penetration and Thermal Resistance of Large-Scale 3D-Printed Cementitious Walls
  62. Olivo Nik, Piccioni Valeria, Milano Francesco, Gramazio Fabio et al. (2025-02)
    Thermal Enhancement of Hollow-Core 3DP Through Nozzle Design Customization
  63. Dey Dhrutiman, Kumar Gaurav, Prasad Ventrapragada, Panda Biranchi (2024-12)
    Experimental Investigation of Thermal Performance of 3D Printed Slab Infused with Lightweight Concrete as Insulation
  64. Zuo Zibo, Tao Yaxin, Corte Wouter (2024-12)
    Experimental Research of Concrete Temperature-Distribution During Large-Scale On-Site 3D Printing Based on Infrared-Thermal-Imaging
  65. Andrade Rodrigo, Mendoza Reales Oscar, Carvalho Gonzaga e Silva Ana, Fairbairn Eduardo et al. (2024-12)
    Thermal Behavior of Air-Fluid in Triangular Cavities of 3D Printed Concrete Walls
  66. Dai Xiaodi, Kandy Sharu, Neithalath Narayanan, Kumar Aditya et al. (2024-11)
    Thermally Stimulated Stiffening and Fly-Ash’s Alkaline-Activation by Ca(OH)2 Addition Facilitates 3D Printing
  67. Kosson Michael, Brown Lesa, Thorne Garret, Sanchez Florence (2024-11)
    Influence of Internal Architecture and Ink Formulation on the Thermal Behavior of 3D Printed Cementitious Materials
  68. Teng Teng, Zhi Yefan, Akbarzadeh Masoud (2024-11)
    Gradient Multimaterial Printing:
    Integrated and Tailored Thermal Insulation Through Gradient Multimaterial Additive Manufacturing for Masonry Architectural Components
  69. Zhang Yi, Tao Yaxin, Godinho Jose, Ren Qiang et al. (2024-11)
    Layer Interface Characteristics and Adhesion of 3D Printed Cement-Based Materials Exposed to Post-Printing Temperature Disturbance
  70. Curth Alexander, Alvarez Eduardo, Sass Lawrence, Norford Leslie et al. (2024-11)
    Additive Energy:
    3D Printing Thermally Performative Building Elements with Low-Carbon Earthen Materials
  71. Chamatete Kunda, Yalçınkaya Çağlar (2024-10)
    Numerical Assessment of Thermal Bridging Effects in 3D Printed Foam-Concrete Walls
  72. Meyuhas Ohad, Larianovsky Pavel, Natanian Jonathan, Sprecher Aaron (2024-09)
    Thermal and Structural Performance of Cork-Cement Composite for Additive Manufacturing
  73. Dey Dhrutiman, Panda Biranchi (2024-09)
    Numerical Evaluation of Thermal Performance and Improvement-Strategies for 3D Printed Concrete Structures
  74. Sovetova Meruyert, Calautit John (2024-09)
    Effect of the Printing Process on Thermal Performance of 3D Printed Structures
  75. Mohan Manu, Tao Yaxin, Schutter Geert, Tittelboom Kim (2024-09)
    Influence of Temperature Variations on the Performance of Two-Component 3D Printable Mixtures
  76. Mahmoudi Matineh, Wangler Timothy, Flatt Robert (2024-09)
    Robustness of Digital Concrete:
    Effects of Temperature, Accelerator Type and Dosage
  77. Jacquet Yohan, Spangenberg Jon, Perrot Arnaud (2024-09)
    Exploring Viscosity and Friction Through Temperature:
    Understanding Self-Heating Dynamics of Non-Newtonian 3D Printable Construction Materials via CFD Modeling
  78. Mezhov Alexander, Robens-Radermacher Annika, Unger Jörg, Schmidt Wolfram (2024-09)
    Effect of the Ambient Temperature on the Structural Build-Up of 3D Printed Concrete:
    Experimental and Modelling Study
  79. Liu Ruiqing, Du Hongjian (2024-09)
    Improving Thermal Insulation Performance of 3D Printed Concrete Wall
  80. Wei Yazhi, Zhang Hui (2024-09)
    Influence of Temperature and Humidity on Mechanical Properties of Calcined-Oyster-Shell-Powder-Modified 3D Printed Concrete
  81. Sovetova Meruyert, Kaiser Calautit John (2024-08)
    Thermal and Energy Efficiency in 3D Printed Buildings:
    Review of Geometric Design, Materials and Printing Processes
  82. Rubeis Tullio, Ciccozzi Annamaria, Giusti Letizia, Ambrosini Dario (2024-07)
    On the Use of 3D Printing to Enhance the Thermal Performance of Building Envelope:
    A Review
  83. Liew Kim, Li Gen, Yin Binbin, Sun Jinhua et al. (2024-07)
    Structural Deterioration and Mechanical Degradation of Limestone-Calcined-Clay-Cement Under Elevated Temperature
  84. Wang Jinjin, Chen Cheng, Chu Tianwei, Jiang Liming et al. (2024-07)
    Experimental Study and OpenSees Modelling for Thermal Response of 3D Printed Concrete Exposed to Fires
  85. Zhang Yi, Tittelboom Kim, Schutter Geert, Jiang Zhengwu (2024-07)
    Active Rheology-Control for 3D Printable Cement-Based Materials by Temperature:
    An Exploratory Study
  86. Sovetova Meruyert, Calautit John (2024-07)
    Influence of Printing Parameters on the Thermal Properties of 3D Printed Construction Structures
  87. Yang Chao, Xu Xinglong, Lei Zuxiang, Sun Junbo et al. (2024-06)
    Enhancing Mechanical Properties of Three-Dimensional Concrete at Elevated Temperatures Through Recycled Ceramic-Powder Treatment Methods
  88. Dong Liang, Yang Yekai, Liu Zhongxian, Zhang Yan et al. (2024-06)
    Interface Bonding Characteristics of 3D Printed Ultra-High-Performance Concrete After Elevated Temperatures
  89. Tao Yaxin, Dai Xiaodi, Schutter Geert, Tittelboom Kim (2024-05)
    Adhesion Performance of Alkali-Activated Material for 3D Printing of Tunnel Linings at Different Temperatures
  90. Capêto Ana, Jesus Manuel, Uribe Braian, Guimarães Ana et al. (2024-05)
    Building a Greener Future:
    Advancing Concrete Production Sustainability and the Thermal Properties of 3D Printed Mortars
  91. Petruzzi Elena, Tsamis Alexandros, Ullal Chaitanya (2024-04)
    Toward a Digital Design Framework for the Thermal Tunability of 3D Printed Envelopes
  92. Wang Xiangyu, Krishnan Padmaja, Celik Kemal (2024-04)
    Enhancing Carbonation and Thermal Insulation of Reactive Magnesium Oxide Cement (RMC)-Based 3D Printable Pastes with Cenospheres
  93. Sun Bochao, Dominicus Randy, Dong Enlai, Li Peichen et al. (2024-04)
    Predicting the Strength Development of 3D Printed Concrete Considering the Synergistic Effect of Curing-Temperature and Humidity:
    From Perspective of Modified Maturity-Model
  94. Rangel Carolina, Guimarães Ana, Salet Theo, Lucas Sandra (2024-03)
    3D Printing Lightweight Mortars with Cork to Improve Thermal Efficiency in Buildings
  95. Chamatete Kunda, Yalçınkaya Çağlar (2024-03)
    Numerical Evaluation on Thermal Performance of 3D Printed Concrete Walls:
    The Effects of Lattice-Type, Filament-Width and Granular-Filling-Material
  96. Carcassi Olga, Maierdan Yierfan, Akemah Tashania, Kawashima Shiho et al. (2024-03)
    Maximizing Fiber-Content in 3D Printed Earth Materials:
    Printability, Mechanical, Thermal and Environmental Assessments
  97. Li Zhengrong, Xing Wenjing, Sun Jingting, Feng Xiwen et al. (2024-03)
    Thermal Network Model for Anisotropic Heat Transfer in 3D Printed Complex Geometry Structures
  98. Zhang Yi, Ren Qiang, Dai Xiaodi, Tao Yaxin et al. (2024-03)
    A Potential Active Rheology-Control Approach for 3D Printable Cement-Based Materials:
    Coupling of Temperature and Viscosity-Modifiers
  99. Kotov Evgeny, Nemova Darya, Sergeev Vitaly, Dontsova Anna et al. (2024-03)
    Thermal Performance-Assessment of Aerogel Application in Additive Construction of Energy-Efficient Buildings
  100. Pavlin Majda, Horvat Barbara, Cerc Korošec Romana, Capuder Rok et al. (2024-01)
    Characterisation of a 3D Printed Alkali-Activated Material Based on Waste-Mineral-Wool at Room and Elevated Temperatures
  101. Christ Julian, Perrot Arnaud, Ottosen Lisbeth, Koss Holger (2023-12)
    Rheological Characterization of Temperature-Sensitive Biopolymer-Bound 3D Printing Concrete
  102. Straßer Alexander, Kränkel Thomas, Gehlen Christoph (2023-12)
    Integrating Wire Arc Additive Manufacturing into Selective Paste-Intrusion for Reinforced Concrete Elements:
    Effect of Temperature on the Mechanical Performance
  103. Eugenin Claudia, Cuevas Villalobos Karla, Navarrete Iván (2023-12)
    Temperature-Dependance of 3D Printed Concrete Produced with Copper-Tailings
  104. Qamar Mu'ath, Yaghmour Emad, Wang Xingjian, Naito Clay et al. (2023-12)
    Use of 3D Printed Concrete Components for Thermal Energy Storage
  105. Pessoa Ana Sofia, Jesus Manuel, Rangel Carolina, Guimarães Ana et al. (2023-12)
    Preliminary Study of the Application of Thermal Mortar in 3D Printed Concrete Walls
  106. Vignesh B., Parthasarathi N. (2023-11)
    Analytical Study on 3D Printed Concrete Wall with Different Wall-Configurations When Exposed to High Temperature
  107. Tamimi Adil, Hassan Habibelrahman, Rodriguez-Ubinas Edwin, Alhaidary Haidar et al. (2023-11)
    Thermal Performance of 3D Concrete Printed Walls:
    Calculated and In-Situ Measured U-Values
  108. Gao Huaxing, Chen Yuxuan, Chen Qian, Yu Qingliang (2023-11)
    Thermal and Mechanical Performance of 3D Printing Functionally Graded Concrete:
    The Role of SAC on the Rheology and Phase Evolution of 3DPC
  109. Sun Houchao, Li Furong, Shi Feiting (2023-10)
    Experimental Study on Dynamic Mechanical Properties of 3D Printed Cement-Based Materials Under Splitting Tension After High Temperature
  110. Moelich Migael, Zijl Gideon, Villiers Wibke (2023-09)
    Thermal Performance of Cavities in 3DPC Building Façades
  111. Christen Heidi, Zijl Gideon, Villiers Wibke, Moelich Migael (2023-09)
    Validated Simulation of Thermal Performance of Phase-Change-Material-Infused Recycled Brick-Aggregate in 3D Printed Concrete
  112. Fragnito Andrea, Iasiello Marcello, Mauro Gerardo, Menna Costantino et al. (2023-08)
    Topology-Optimization to Design Innovative High Thermal Resistance 3D Printed Walls
  113. Nadoury Wegdan, Mohamed Ashraf (2023-08)
    Modelling the Temperature Gradient in 3D Concrete Printing
  114. Ravula Risheek, Gatheeshgar Perampalam (2023-07)
    On the Thermal-Energy Performance of 3D Printed Concrete Wall Panels Designed with Varying Insulation Ratios
  115. Robens-Radermacher Annika, Unger Jörg, Mezhov Alexander, Schmidt Wolfram (2023-07)
    Temperature-Dependent Modelling Approach for Early-Age Behavior of Printable Mortars
  116. Bello Nicholas, Memari Ali (2023-06)
    A Structural and Thermal Comparative Review of 3D Printed Wall Shapes
  117. Shenawa Amaal, Karoti Poonam (2023-06)
    3D Printing in Construction, Mixture Characteristics, Strength, and Thermal Performance-Review
  118. Qu Zhengyao, Yu Qingliang, Ong Ghim, Cardinaels Ruth et al. (2023-04)
    3D Printing Concrete Containing Thermal Responsive Gelatin:
    Towards Cold Environment Applications
  119. Sun Bochao, Li Peichen, Wang Dianchao, Ye Jun et al. (2023-03)
    Evaluation of Mechanical Properties and Anisotropy of 3D Printed Concrete at Different Temperatures
  120. Christen Heidi, Zijl Gideon, Villiers Wibke (2023-02)
    Improving Building Thermal Comfort Through Passive Design:
    An Experimental Analysis of Phase-Change-Material 3D Printed Concrete
  121. Arunothayan Arun, Sanjayan Jay (2023-01)
    Elevated Temperature Effects on 3D Printed Ultra-High-Performance Concrete
  122. Zahrani Abdullah, Alghamdi Abdulrahman, Basalah Ahmad (2022-12)
    Computational Optimization of 3D Printed Concrete Walls for Improved Building Thermal Performance
  123. Srinivas Dodda, Dey Dhrutiman, Panda Biranchi, Sitharam Thallak (2022-12)
    Printability, Thermal and Compressive Strength Properties of Cementitious Materials:
    A Comparative Study with Silica-Fume and Limestone
  124. Jiang Jinyang, Zheng Chaolang, Wang Fengjuan, Xu Wenxiang et al. (2022-11)
    Novel 3D Printing Phase-Change-Aggregate-Concrete:
    Mechanical and Thermal Properties Analysis
  125. Kamel Ehsan, Kazemian Ali (2022-11)
    BIM-Integrated Thermal Analysis and Building Energy Modeling in 3D Printed Residential Buildings
  126. Salandin Andrea, Quintana-Gallardo Alberto, Gómez-Lozano Vicente, Guillén-Guillamón Ignacio (2022-10)
    The First 3D Printed Building in Spain:
    A Study on Its Acoustic, Thermal and Environmental Performance
  127. Mansouri Abraham, Binali Alreem, Aljawi Abdulla, Alhammadi Ahmed et al. (2022-10)
    Thermal Modeling of the Convective Heat-Transfer in the Large Air-Cavities of the 3D Concrete Printed Walls
  128. Qu Zhengyao, Geng Guoqing (2022-10)
    Thermal Response Gelatin-Cement-Composite for 3D Concrete Printing
  129. Dey Dhrutiman, Panda Biranchi (2022-10)
    An Experimental Study of Thermal Performance of 3D Printed Concrete Slabs
  130. Wang Li, Lin Wenyu, Ma Hui, Li Dexin et al. (2022-09)
    Mechanical and Microstructural Properties of 3D Printed Aluminate-Cement-Based Composite Exposed to Elevated Temperatures
  131. Shkundalova Olena, Molkens Tom, Claßen Martin, Rossi Barbara (2022-09)
    Characterization of 3D Printed Concrete Beams After Exposure to High Temperature
  132. Araújo Rísia, Martinelli Antônio, Cabral Kleber, Dantas André et al. (2022-08)
    Thermal Performance of Cement-Leca Composites for 3D Printing
  133. Ebrahimi Mahdi, Mohseni Mohammad, Aslani Alireza, Zahedi Rahim (2022-08)
    Investigation of Thermal Performance and Life Cycle Assessment of a 3D Printed Building
  134. Briels David, Kollmannsberger Stefan, Leithner Felicitas, Matthäus Carla et al. (2022-07)
    Thermal Optimization of Additively Manufactured Lightweight Concrete Wall Elements with Internal Cellular Structure through Simulations and Measurements
  135. Dong Liang, Yang Yekai, Liu Zhongxian, Ren Quanchang et al. (2022-07)
    Microstructure and Mechanical Behavior of 3D Printed Ultra-High-Performance Concrete after Elevated Temperatures
  136. Mezhov Alexander, Robens-Radermacher Annika, Zhang Kun, Kühne Hans-Carsten et al. (2022-06)
    Temperature Impact on the Structural Build-Up of Cementitious Materials:
    Experimental and Modelling Study
  137. Straßer Alexander, Matthäus Carla, Weger Daniel, Kränkel Thomas et al. (2022-06)
    Selective Paste-Intrusion:
    Stability of Cement-Paste Mixtures Towards Changing Ambient Temperature
  138. Han Nv, Xiao Jianzhuang, Zhang Lihai, Peng Yu (2022-06)
    A Micro-Scale-Based Numerical Model for Investigating Hygro-Thermo-Mechanical Behavior of 3D Printed Concrete at Elevated Temperatures
  139. Hao Lucen, Xiao Jianzhuang, Sun Jingting, Xia Bing et al. (2022-06)
    Thermal Conductivity of 3D Printed Concrete With Recycled Fine Aggregate Composite Phase-Change-Materials
  140. Nemova Darya, Kotov Evgeny, Andreeva Darya, Khorobrov Svyatoslav et al. (2022-06)
    Experimental Study on the Thermal Performance of 3D Printed Enclosing Structures
  141. Brooks Adam, He Yawen, Farzadnia Nima, Seyfimakrani Shayan et al. (2022-03)
    Incorporating PCM-Enabled Thermal Energy Storage into 3D Printable Cementitious Composites
  142. Cui Hongzhi, Yu Shiheng, Cao Xiangpeng, Yang Haibin (2022-03)
    Evaluation of Printability and Thermal Properties of 3D Printed Concrete Mixed with Phase-Change-Materials
  143. Ayegba Blessing, Egbe King-James, Nazar Ali, Huang Mingzhi et al. (2022-01)
    Resource Efficiency and Thermal Comfort of 3D Printable Concrete Building Envelopes Optimized by Performance Enhancing Insulation:
    A Numerical Study
  144. Ma Guowei, A Ruhan, Xie Panpan, Pan Zhu et al. (2022-01)
    3D Printable Aerogel-Incorporated Concrete:
    Anisotropy Influence on Physical, Mechanical, and Thermal Insulation Properties
  145. Kilic Ugur, Yang Yang, Ma Ji, Ozbulut Osman (2021-12)
    Rheological and Thermal Characterization of 3D Printable Lightweight Cementitious Composites with Fly-Ash-Cenospheres
  146. Guimarães Ana, Delgado João, Lucas Sandra (2021-11)
    Thermal and Environmental Benefits of 3D Printing on Building Construction
  147. Shahmirzadi Mohsen, Gholampour Aliakbar, Kashani Alireza, Ngo Tuan (2021-09)
    Shrinkage Behavior of Cementitious 3D Printing Materials:
    Effect of Temperature and Relative Humidity
  148. Cuevas Villalobos Karla, Chougan Mehdi, Martin Falk, Ghaffar Seyed et al. (2021-05)
    3D Printable Lightweight Cementitious Composites with Incorporated Waste-Glass-Aggregates and Expanded Microspheres:
    Rheological, Thermal and Mechanical Properties
  149. Xiao Jianzhuang, Han Nv, Zhang Lihai, Zou Shuai (2021-05)
    Mechanical and Microstructural Evolution of 3D Printed Concrete with Polyethylene-Fiber and Recycled Sand at Elevated Temperatures
  150. Bong Shin, Xia Ming, Nematollahi Behzad, Shi Caijun (2021-04)
    Ambient Temperature Cured ‘Just-Add-Water’ Geopolymer for 3D Concrete Printing Applications
  151. Dielemans Gido, Briels David, Jaugstetter Fabian, Henke Klaudius et al. (2021-04)
    Additive Manufacturing of Thermally Enhanced Lightweight Concrete Wall Elements with Closed Cellular Structures
  152. Sun Jingting, Xiao Jianzhuang, Li Zhengrong, Feng Xiwen (2021-03)
    Experimental Study on the Thermal Performance of a 3D Printed Concrete Prototype Building
  153. Marais Hannelie, Christen Heidi, Cho Seung, Villiers Wibke et al. (2021-03)
    Computational Assessment of Thermal Performance of 3D Printed Concrete Wall Structures with Cavities
  154. Pessoa Ana Sofia, Guimarães Ana, Lucas Sandra, Simões Nuno (2021-02)
    3D Printing in the Construction Industry:
    A Systematic Review of the Thermal Performance in Buildings
  155. Cicione Antonio, Mazolwana K., Kruger Jacques, Walls Richard et al. (2020-12)
    Effect of Transverse and Longitudinal Confinement on the Inter-Layer Bond in 3D Printed Concrete at Elevated Temperatures:
    An Experimental Study
  156. Alchaar Aktham, Tamimi Adil (2020-10)
    Mechanical Properties of 3D Printed Concrete in Hot Temperatures
  157. Prasittisopin Lapyote, Pongpaisanseree Kittisak, Jiramarootapong Patiphat, Snguanyat Chalermwut (2020-07)
    Thermal- and Sound-Insulation of Large-Scale 3D Extrusion-Printing Wall-Panel
  158. Weger Daniel, Kim Heejeong, Talke Daniel, Henke Klaudius et al. (2020-07)
    Lightweight Concrete 3D Printing by Selective Cement-Activation:
    Investigation of Thermal Conductivity, Strength and Water-Distribution
  159. Vantyghem Gieljan, Steeman Marijke, Corte Wouter, Boel Veerle (2020-07)
    Design-Optimization for 3D Concrete Printing:
    Improving Structural and Thermal Performances
  160. Cicione Antonio, Kruger Jacques, Walls Richard, Zijl Gideon (2020-05)
    An Experimental Study of the Behavior of 3D Printed Concrete at Elevated Temperatures
  161. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Hermens Lex et al. (2019-09)
    The Influence of Material Temperature on the In-Print Strength and Stability of a 3D Print Mortar
  162. Alghamdi Hussam, Neithalath Narayanan (2019-07)
    Synthesis and Characterization of 3D Printable Geopolymeric Foams for Thermally Efficient Building Envelope Materials
  163. Bong Shin, Nematollahi Behzad, Nazari Ali, Xia Ming et al. (2019-03)
    Method of Optimization for Ambient Temperature Cured Sustainable Geopolymers for 3D Printing Construction Applications
  164. Kaszyńska Maria, Olczyk Norbert, Techman Mateusz, Skibicki Szymon et al. (2019-02)
    Thermal-Humidity Parameters of 3D Printed Wall
  165. Huang Hai, Huang Tingjie, Yuan Qiang, Zhou Dajun et al. (2019-01)
    Temperature-Dependence of Structural Build-Up and Its Relation with Hydration Kinetics of Cement-Paste
  166. Bard Joshua, Cupkova Dana, Washburn Newell, Zeglin Garth (2018-12)
    Robotic Concrete Surface Finishing:
    A Moldless Approach to Creating Thermally Tuned Surface Geometry for Architectural Building Components Using Profile 3D Printing
  167. Weng Yiwei, Li Mingyang, Liu Zhixin, Lao Wenxin et al. (2018-12)
    Printability and Fire Performance of a Developed 3D Printable Fiber-Reinforced Cementitious Composites under Elevated Temperatures
  168. Bard Joshua, Cupkova Dana, Washburn Newell, Zeglin Garth (2018-09)
    Thermally Informed Robotic Topologies:
    Profile 3D Printing for the Robotic Construction of Concrete Panels, Thermally Tuned Through High-Resolution Surface Geometry
  169. Bong Shin, Nematollahi Behzad, Nazari Ali, Xia Ming et al. (2018-09)
    Fresh and Hardened Properties of 3D Printable Geopolymer Cured in Ambient Temperature
  170. Falliano Devid, Gugliandolo Ernesto, Domenico Dario, Ricciardi Giuseppe (2018-09)
    Experimental Investigation on the Mechanical Strength and Thermal Conductivity of Extrudable Foamed Concrete and Preliminary Views on Its Potential Application in 3D Printed Multilayer Insulating Panels
  171. Sarakinioti Maria, Turrin Michela, Konstantinou Thaleia, Tenpierik Martin et al. (2018-03)
    Developing an Integrated 3D Printed Façade with Complex Geometries for Active Temperature-Control