Skip to content

#approach

Keywords by Co - Occurrence

  1. Ferrara Liberato, Rizzieri Giacomo, Cremonesi Massimiliano (2025-12)
    A Particle Fluid Dynamics Modelling Approach to Design 3D Concrete Printing Materials and Processes
  2. Iqbal Imtiaz, Kasim Tala, Inqiad Waleed, Besklubova Svetlana et al. (2025-11)
    Effect of Metakaolin and Biochar Addition on the Performance of 3D Concrete Printing:
    A Meta-Analysis Approach
  3. Baah Thomas, Kim Heejeong, Latypov Marat (2025-11)
    Multi-Objective Adaptive Experimental Approach for Optimizing 3D Concrete Printing Mixtures and Parameters Incorporating Construction and Demolition Waste for Sustainable Construction
  4. Khalid Lawand, Mermerdaş Kasım, Ekmen Şevin, Khidhir Bzeni Dillshad (2025-11)
    Optimization of Fresh and Hardened Properties of Fiber-Reinforced 3D Printed Geopolymer Composites Using Response Surface Methodology:
    A Data-Driven Approach Based on Prior Experimental Studies
  5. Sahu Akshay, Panda Biranchi (2025-11)
    An Additive Manufacturing-Oriented Design Approach for Digital Construction
  6. Mani Aravindhraj, Sekar Muthu (2025-11)
    Extrudability in 3D Printing:
    A Comprehensive Approach to S/C, W/C Ratios and Superplasticizer Content
  7. Uddin Md, Mostazid Md, Faysal Md, Shi Xinjun (2025-10)
    Developing a Novel Strength Predictive Modeling for 3D Printable Geopolymer Concrete:
    An Interpretable Data-Driven Approach
  8. Ozturk Onur, Lunsford Caleb, Nair Sriramya (2025-10)
    Advancing Underwater Construction with 3D Printing:
    A Two-Stage Approach
  9. Matos Ana, Emiroğlu Mehmet, Milheiro-Oliveira Paula (2025-09)
    Predicting Stabilized Soil Mixture Proportions for 3D Printing:
    Preliminary Study Using the Design of Experiments Approach
  10. Li Leo, Fei Zuojie, Jiao Chujie, Luo Tao et al. (2025-09)
    Bauxite Residue-Based 3D Printing Mortar:
    Enhancing Performance and Sustainability Through the Paste Replacement Approach
  11. Xing Wenjing, Li Zhengrong (2025-09)
    Quantifying the Heterogeneous Anisotropic Thermal Performance of Extrusion-Based 3D Printed Structures:
    A Multiscale Computational Approach
  12. Leong Wai (2025-09)
    Structural Optimization and Performance Evaluation of Spain's 3D-Printed Concrete Bridges Using AI-Based Design Approaches
  13. Syed Sajid, Abid Khasim, Khan Majid (2025-09)
    An Interpretable Machine Learning Approach for Predicting Reinforcement Bond Performance in 3D Concrete Printing
  14. Kiyani Muhammad, Hussain Syed, Emaan Rajja, Kamal Muhammad et al. (2025-08)
    Influence of Process Parameters on 3D Concrete Printing:
    A Step Towards Standardized Approaches
  15. Wagner Gabriel, Silva João, Ribeiro João, Figueiredo Bruno et al. (2025-08)
    A Novel and Flexible Approach to Modeling the Additive Manufacturing Extrusion of Cementitious Materials
  16. Chovghi Frederic, Richter Christiane, D'Acunto Pierluigi (2025-07)
    Fabrication-Aware Structural Form-Finding for Additive Manufacturing:
    An Equilibrium-Based Approach
  17. Bos Freek, Menna Costantino, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
    Approach and Main Results:
    Mechanical Properties of 3D Printed Concrete
  18. Khodadadi Nima, Roghani Hossein, Caso Francisco, Kenawy El‐Sayed et al. (2025-06)
    Machine Learning Approach for the Flexural Strength of 3D‐Printed Fiber‐reinforced Concrete Based on the Meta‐heuristic Algorithm
  19. Najm Omar, Alhassan Mohammad (2025-06)
    Implementation of Brucite in Alkali-Activated Materials Intended for 3D Printed Structures:
    A Fractional Factorial Design Approach
  20. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John (2025-06)
    Enhancing 3D Printed Concrete Through Waste Fly Ash:
    A Comprehensive Approach to Sustainable and Efficient Mix Design
  21. Kumar S., Muthu Nelson, Panda Biranchi (2025-06)
    Numerical Investigation of Structural Behavior of 3D-Printed Concrete Walls:
    Insights from Damage Mechanics and Cohesive Zone Approaches
  22. Zhang Ruo-Chen, Li Jiaxing, Liu Yiran, Huang Yimiao et al. (2025-06)
    Self-Healing Approach for Micro-Defects in 3D Printed Concrete:
    Microbial Community
  23. Gao Jianhao, Niu Yujun, Wang Chaofeng (2025-04)
    Linear Helical Printing:
    A Novel Approach to 3D Printing Concrete Structures with Enhanced Integrity
  24. Calmanovici Miran, Livne Achiya, Barath Shany (2025-03)
    From Waste to Resource:
    A Design to Fabrication Approach Integrating Recycled Wood-Mycelium Mixtures for 3D Printing in Architecture
  25. Suphunsaeng Kantawich, Prasittisopin Lapyote, Pethrung Sirichai, Pansuk Withit (2025-03)
    Fire Performance Evaluation of 3D-Printed Concrete Walls:
    A Combined Full-Scale and Numerical Modeling Approach
  26. Zafar Muhammad, Shahid Adnan, Sedghi Reza, Hojati Maryam (2025-03)
    Optimization of Biopolymer Additives for 3D Printable Cementitious Systems:
    A Design of Experiment Approach
  27. Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Deng Qi et al. (2025-02)
    Fresh Properties and Rheological Behavior of 3D-Printed Cementitious Composites Incorporating Recycled PVC and Nylon Fibers:
    An Experimental Approach
  28. Banijamali Kasra, Dempsey Mary, Chen Jianhua, Kazemian Ali (2025-02)
    Machine Learning Approach to Predict the Early-Age Flexural Strength of Sensor-Embedded 3D-Printed Structures
  29. Sangiorgio Valentino, Floris Ignazio, Duran Dayan (2025-01)
    Unified Integration Approach for Bridging BIM Model to 3D Construction Printing and Scale Prototyping
  30. Lori Ali, Mehrali Mehdi (2025-01)
    Filament-Geometry-Control of Printable Geopolymer Using Experimental and Data-Driven Approaches
  31. Li Chao, Petzold Frank (2025-01)
    Ontology-Driven Mixture-of-Domain Documentation:
    A Backbone Approach Enabling Question Answering for Additive Construction
  32. Li Fangyuan, Hu Xiangcheng, Shahzad Qamar (2024-12)
    Anisotropic Behavior in 3D Printed Concrete:
    Finite Element Simulation Approach
  33. Rasel Risul, Hossain Md, Zubayer Md, Zhang Chaoqun (2024-11)
    Exploring the Fresh and Rheology Properties of 3D Printed Concrete with Fiber-Reinforced Composites:
    A Novel Approach Using Machine Learning Techniques
  34. Kaszyńska Maria, Skibicki Szymon (2024-11)
    Sustainable Development Approach for 3D Concrete Printing
  35. Shahzad Qamar, Li Fangyuan (2024-11)
    Assessing the Load-Bearing Capacity of 3D Printed Concrete at Early-Ages:
    An Innovative Approach
  36. Youssef Passant, Feky Muhammad, Ragab Ahmed, Serag Mohamed (2024-10)
    Geopolymer Composites for 3D Printing Applications:
    A Statistical Analysis Approach
  37. Du Guoqiang, Sun Yan, Qian Ye (2024-10)
    Nature-Inspired Approach for Enhancing the Fracture Performance of 3D Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
  38. Jongvisuttisun Passarin, Chaiyapoom Phattarakamon, Jiramarootapong Patiphat, Meemuk Kornravee et al. (2024-09)
    The Second 3D Printed Prefabricated Prefinished Volumetric Construction Building in Thailand:
    A New Sustainable and Efficient Approach for a Low-Rise Prefab Modular Building
  39. Kromoser Benjamin, Gappmeier Peter, Ahmed Iyad, Reichenbach Sara (2024-09)
    A New Approach for Automated Design and Robot-Assisted Production of Structurally Optimised Reusable Concrete Building Elements
  40. Meibodi Mania, Lin Yuxin, Chen Hao (2024-09)
    Hybrid Approaches Towards 3D Concrete Printing for Lightweight Reinforced Concrete Structures
  41. Rudolph Jennifer, Lowke Dirk (2024-09)
    Design and Characterisation of a Two-Component Mortar-System for Shotcrete 3D Printing:
    An Approach to the Targeted Control of Material-Properties
  42. Lei Siduo, Kolawole John, Dobrzanski James, Xu Jie et al. (2024-09)
    Enhancing Surface Quality in Additive Manufacturing Applications:
    A Micro-Power Float Approach
  43. Amiri Fatemeh, Baghdadi Abtin, Kwon Hyunchul (2024-08)
    New Reinforcement Approach for Freeform Concrete Components Through Carbon Fiber 3D Printing
  44. Chai Hua, Ororbia Maximilian, Zhi Yefan, Welch Ryan et al. (2024-08)
    Design Approach for a Post-Tensioned Funicular Concrete Beam
  45. Rehman Saif, Riaz Raja, Usman Muhammad, Kim In-Ho (2024-08)
    Augmented Data-Driven Approach Towards 3D Printed Concrete Mix Prediction
  46. Sariyev Bakytzhan, Konysbekov Alisher, Jexembayeva Assel, Konkanov Marat (2024-07)
    A Comparative Study of the Rheological Properties of a Fly-Ash-Based Geopolymer Reinforced with PP-Fiber for 3D Printing:
    An Experimental and Numerical Approach
  47. Nhieu Nhat-Luong, Dang Tri (2024-07)
    An Integrated T-Spherical Fuzzy Einstein Interaction Aggregator Group Decision-Making Approach:
    A Case Study of Concrete 3D Printing Robot Application in Vietnam
  48. Salaimanimagudam M., Jayaprakash Jaganathan (2024-07)
    Selection of Digital Fabrication Technique in the Construction Industry:
    A Multi-Criteria Decision-Making Approach
  49. Duarte Gonçalo, Duarte José, Brown Nathan, Memari Ali et al. (2024-06)
    Design for Early-Age Structural Performance of 3D Printed Concrete Structures:
    A Parametric Numerical Modeling Approach
  50. Han Yilong, Zhu Lin, Xue Rui, Liu Chenyu et al. (2024-05)
    Unpacking the Dynamics of 3D Concrete Printing Adoption:
    An Integrated UTAUT-TOE Approach
  51. Youssef Passant, Feky Muhammad, Ragab Ahmed, Serag Mohamed (2024-04)
    Characterization of Geopolymer Composites for 3D Printing:
    A Microstructure Approach
  52. Ahmed Hassan, Giwa Ilerioluwa, Game Daniel, Arce Gabriel et al. (2024-04)
    Automated Reinforcement During Large-Scale Additive Manufacturing:
    Structural-Assessment of a Dual Approach
  53. Uddin Md, Ye Junhong, Haque M., Yu Kequan et al. (2024-04)
    A Novel Compressive Strength Estimation Approach for 3D Printed Fiber-Reinforced Concrete:
    Integrating Machine Learning and Gene Expression Programming
  54. Dubor Alexandre, Cabay Edouard, Tayoun Yara, Carrasco Oriol et al. (2024-04)
    3D Printed Earth Architecture:
    Design Approach for a Performative Habitat
  55. Zhang Yi, Ren Qiang, Dai Xiaodi, Tao Yaxin et al. (2024-03)
    A Potential Active Rheology-Control Approach for 3D Printable Cement-Based Materials:
    Coupling of Temperature and Viscosity-Modifiers
  56. Ivaniuk Egor, Mechtcherine Viktor (2024-03)
    Approach for Production of Textile-Reinforced Beams and Slabs Using Three-Dimensional Concrete Printing
  57. Sahai Rajan, Bisht Ravindra, Malviya Nitesh, Kumar Shivam et al. (2024-01)
    Aspects of Waste-Material-Utilization and 3D Concrete Printer Development-Approach:
    A Review
  58. Ambily Parukutty, Kaliyavaradhan Senthil, Sebastian Shilpa, Shekar Deepadharshan (2023-12)
    Mixing Approach for 3D Printable Concrete:
    Method of Addition and Optimization of Superplasticizer Dosage
  59. Chen Yu, Rahmani Hossein, Schlangen Erik, Çopuroğlu Oğuzhan (2023-11)
    An Approach to Develop Set-on-Demand 3D Printable Limestone-Calcined-Clay-Based Cementitious Materials Using Calcium-Nitrate
  60. Jauk Julian, Vašatko Hana, Gosch Lukas, Ristoski Kristijan et al. (2023-11)
    Coextrusion of Clay-Based Composites:
    Using a Multi-Material Approach to Achieve Gradient Porosity in 3D Printed Ceramics
  61. Tabassum Nusrat, Duarte José, Nazarian Shadi (2023-11)
    Advancing 3D Concrete Printing for Affordable Housing:
    A Shape Grammar-Based Approach to Print Spanning-Roof Structures
  62. Asaf Ofer, Bentur Arnon, Larianovsky Pavel, Sprecher Aaron (2023-10)
    From Soil to Printed Structures:
    A Systematic Approach to Designing Clay-Based Materials for 3D Printing in Construction and Architecture
  63. Singh Amardeep, Wang Yufei, Zhou Yiyi, Sun Junbo et al. (2023-10)
    Utilization of Antimony-Tailings in Fiber-Reinforced 3D Printed Concrete:
    A Sustainable Approach for Construction Materials
  64. Coward Andy, Sørensen Jesper (2023-09)
    MINIMASS:
    A New Approach for Low-Carbon, Low-Cost 3D Printed Concrete Beams
  65. Asensio Javier, Josa Irene, Monserrat Andrea, Fuente Albert (2023-09)
    3D‐Printed Concrete Footbridges:
    An Approach to Assess the Sustainability Performance
  66. Rahemipoor Sahand, Hasany Masoud, Mehrali Mohammad, Almdal Kristoffer et al. (2023-07)
    Phase-Change-Materials Incorporation into 3D Printed Geopolymer Cement:
    A Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings
  67. Robens-Radermacher Annika, Unger Jörg, Mezhov Alexander, Schmidt Wolfram (2023-07)
    Temperature-Dependent Modelling Approach for Early-Age Behavior of Printable Mortars
  68. Cabibihan John-John, Gaballa Aya, Fadli Fodil, Irshidat Mohammad et al. (2023-06)
    A Guided Approach for Utilizing Concrete Robotic 3D Printing for the Architecture, Engineering, and Construction Industry
  69. Ungureanu Dragoș, Onuțu Cătălin, Isopescu Dorina, Țăranu Nicolae et al. (2023-06)
    A Novel Approach for 3D Printing Fiber-Reinforced Mortars
  70. Jacquet Yohan, Perrot Arnaud (2023-06)
    Evolutionary Approach Based on Thermoplastic Bio-Based Building Material for 3D Printing Applications:
    An Insight into a Mix of Clay and Wax
  71. Heywood Kate, Nicholas Paul (2023-06)
    Sustainability and 3D Concrete Printing:
    Identifying a Need for a More Holistic Approach to Assessing Environmental Impacts
  72. Paudel Satish (2023-06)
    Investigation of Modelling Approaches to Study the Structural Performance of 3D Printed Plain Wall Under Uniform Axial Compression
  73. Shahzad Qamar, Li Fangyuan (2023-05)
    The Influence of Print-Path on Early-Age Plastic Bearing-Capacity and Mechanical Behavior of 3D Printed Concrete:
    A Novel Approach for Practical Applications
  74. Vespalec Arnošt, Podroužek Jan, Koutný Daniel (2023-04)
    DoE Approach to Setting Input Parameters for Digital 3D Printing of Concrete for Coarse Aggregates up to 8 mm
  75. Besklubova Svetlana, Tan Bing, Zhong Ray, Spicek Nikola (2023-04)
    Logistic-Cost-Analysis for 3D Printing Construction Projects Using a Multi-Stage Network-Based Approach
  76. Valente Marco, Sambucci Matteo, Chougan Mehdi, Ghaffar Seyed (2023-04)
    Composite Alkali-Activated Materials with Waste-Tire-Rubber Designed for Additive Manufacturing:
    An Eco-Sustainable and Energy Saving Approach
  77. Khan Shoukat, Koç Muammer (2023-03)
    Buildability-Analysis of 3D Concrete Printing Process:
    A Parametric Study Using Design of Experiment-Approach
  78. Pons-Valladares Oriol, Casanovas-Rubio Maria, Armengou Jaume, Fuente Albert (2023-02)
    Approach for Sustainability-Assessment for Footbridge Construction Technologies:
    Application to the First World D-Shape 3D Printed Fiber-Reinforced Mortar Footbridge in Madrid
  79. Ma Zongfang, Wan Weipeng, Song Lin, Liu Chao et al. (2022-11)
    An Approach of Path-Optimization Algorithm for 3D Concrete Printing Based on Graph-Theory
  80. Liu Miao, Wang Li, Ma Guowei, Li Weiwei et al. (2022-11)
    U-Type Steel-Wire-Mesh for the Flexural Performance Enhancement of 3D Printed Concrete:
    A Novel Reinforcing Approach
  81. Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping et al. (2022-11)
    Flow and Deformation Behaviors of Cementitious Materials Through Nozzles with Different Geometric Parameters:
    Experimental and Numerical Approaches
  82. Pham Thi, Nguyen Thu, Trinh Thanh, Nguyen Anh et al. (2022-08)
    Development of 3D Printers for Concrete Structures:
    Mix Proportion Design Approach and Laboratory Testing
  83. Liu Xiongfei, Li Qi, Wang Fang, Ma Guowei (2022-07)
    Systematic Approach for Printability Evaluation and Mechanical Property Optimization of Spray-Based 3D Printed Mortar
  84. Singh Amardeep, Chen Zhiyuan, Duan Zhenhua, Li Lei (2022-07)
    Utilization Potential of Steel-Fibers in 3D Printed Functionally Graded Cementitious Composite:
    An Experimental Approach
  85. Diab Zeinab, Do Duc, Rémond Sébastien, Hoxha Dashnor (2022-06)
    Uncertainty Quantification of Concrete Properties at Fresh State and Stability-Analysis of the 3D Printing Process by Stochastic Approach
  86. Dörrie Robin, Kloft Harald (2022-06)
    Force-Flow Compliant Robotic Path-Planning Approach for Reinforced Concrete Elements Using SC3DP
  87. Galé Benjamin, Ursenbacher Thierry, Petit Agnès, Bourquin Vincent (2022-06)
    Shotcrete 3DCP Projection-Angle and Speed-Optimization:
    Experimental Approaches and Theoretical Modelling
  88. Ekanayaka Virama, Lachmayer Lukas, Raatz Annika, Hürkamp André (2022-06)
    Approach to Optimize the Inter-Layer Waiting Time in Additive Manufacturing with Concrete Utilizing FEM Modeling
  89. Stieler David, Schwinn Tobias, Menges Achim (2022-03)
    Volumetric Intersections:
    Modularization Approaches for Freeform Prefab Concrete Construction
  90. Xu Zhisong, Li Zhuguo, Jiang Fei (2021-11)
    Numerical Approach to Pipe Flow of Fresh Concrete Based on MPS Method
  91. Lachmayer Lukas, Ekanayaka Virama, Hürkamp André, Raatz Annika (2021-11)
    Approach to an Optimized Printing Path for Additive Manufacturing in Construction Utilizing FEM Modeling
  92. Lauff Philipp, Pugacheva Polina, Rutzen Matthias, Weiss Ursula et al. (2021-11)
    Evaluation of the Behavior of Carbon-Short-Fiber-Reinforced Concrete (CSFRC) Based on a Multi-Sensory Experimental Investigation and a Numerical Multi-Scale Approach
  93. Rennen Philipp, Khader Noor, Hack Norman, Kloft Harald (2021-11)
    A Hybrid Additive Manufacturing Approach:
    Combining Additive Manufacturing and Green-State Concrete Milling to Create a Functionally Integrated Loadbearing Concrete Panel System
  94. Placzek Gerrit, Brohmann Leon, Mawas Karam, Schwerdtner Patrick et al. (2021-11)
    A Lean-Based Production Approach for Shotcrete 3D Printed Concrete Components
  95. Ge Zhi, Tawfek Abdullah, Zhang Hongzhi, Yang Yongwei et al. (2021-09)
    Influence of an Extrusion-Approach on the Fiber-Orientation and Mechanical Properties of Engineering Cementitious Composite
  96. Troemner Matthew, Ramyar Elham, Meehan Jonathan, Johnson Benton et al. (2021-09)
    A 3D Printing-Centered Approach to Mars-Habitat Architecture and Fabrication
  97. Schryver Robin, Cheikh Khadija, Lesage Karel, Yardimci Mert et al. (2021-09)
    Numerical Reliability Study Based on Rheological Input for Bingham-Paste-Pumping Using a Finite Volume Approach in OpenFOAM
  98. Khandelwal Vaatsuly, Bhatia Vibhav, Dogra Vinay, Sharma Shivam et al. (2021-08)
    3D Printer Robot for Civil Construction:
    A Bond Graph Approach
  99. Baghdadi Abtin, Dörrie Robin, Kloft Harald (2021-08)
    New Calculation Approach for Selecting and Orienting the Reinforcing Material for Robotic Concrete Manufacturing
  100. Benamara Abdeslam, Pierre Alexandre, Kaci Abdelhak, Mélinge Yannick (2021-05)
    Digital Printing of Mortar in Carrier-Liquid:
    Comparison of Approaches to Predict Print Stability
  101. Placzek Gerrit, Schwerdtner Patrick (2020-12)
    Derivation of Integration Approaches for "Concrete 3D Printing" in the Construction Process Based on Features of Additive Manufacturing
  102. Bester Frederick, Heever Marchant, Kruger Jacques, Zijl Gideon (2020-11)
    Reinforcing Digitally Fabricated Concrete:
    A Systems Approach Review
  103. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom (2020-07)
    Numerical Modeling of an Extrusion-Based 3D Concrete Printing-Process Considering a Spatially-Varying Pseudo-Density Approach
  104. Lee Minu, Mata-Falcón Jaime, Popescu Mariana, Block Philippe et al. (2020-07)
    Potential Approaches for Reinforcing Complex Concrete Structures with Integrated Flexible Formwork
  105. Assaad Joseph, Yassin Abdallah, Sakka Fatima, Hamzeh Farook (2020-05)
    A Modular Approach for Steel Reinforcing of 3D Printed Concrete:
    Preliminary Study
  106. Weng Yiwei, Li Mingyang, Ruan Shaoqin, Wong Teck et al. (2020-03)
    Comparative Economic, Environmental and Productivity-Assessment of a Concrete Bathroom Unit Fabricated Through 3D Printing and a Pre-Cast Approach
  107. Akulova I., Slavcheva Galina (2020-02)
    Methodical Approach to Calculation of the Maintenance Cost for 3D Built Printing Equipment
  108. Rahul Attupurathu, Sharma Abhishek, Santhanam Manu (2020-01)
    A Desorptivity-Based Approach for the Assessment of Phase Separation During Extrusion of Cementitious Materials
  109. Lafhaj Zoubeir, Rabenantoandro Andry, Moussaoui Soufiane, Dakhli Zakaria et al. (2019-12)
    Experimental Approach for Printability-Assessment:
    Toward a Practical Decision-Making Framework of Printability for Cementitious Materials
  110. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-07)
    An Ab-Inito Approach for Thixotropy Characterisation of Nano-Particle-Infused 3D Printable Concrete
  111. Lafhaj Zoubeir, Dakhli Zakaria (2019-04)
    Performance Indicators of Printed Construction Materials:
    A Durability-Based Approach
  112. Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2019-03)
    An Approach to Develop Printable Strain-Hardening Cementitious Composites
  113. Bard Joshua, Cupkova Dana, Washburn Newell, Zeglin Garth (2018-12)
    Robotic Concrete Surface Finishing:
    A Moldless Approach to Creating Thermally Tuned Surface Geometry for Architectural Building Components Using Profile 3D Printing
  114. Liu Zhixin, Li Mingyang, Weng Yiwei, Wong Teck et al. (2018-12)
    Mixture-Design-Approach to Optimize the Rheological Properties of the Material Used in 3D Cementitious Material-Printing
  115. Nerella Venkatesh, Beigh Mirza, Fataei Shirin, Mechtcherine Viktor (2018-11)
    Strain-Based Approach for Measuring Structural Build-Up of Cement-Pastes in the Context of Digital Construction
  116. Asprone Domenico, Auricchio Ferdinando, Menna Costantino, Mercuri Valentina (2018-03)
    3D Printing of Reinforced Concrete Elements:
    Technology and Design Approach
  117. Chen Yu, Çopuroğlu Oğuzhan, Veer Frederic (2018-01)
    A Critical Review of 3D Concrete Printing as a Low-CO2 Concrete Approach
  118. Lao Wenxin, Li Mingyang, Masia Lorenzo, Tan Ming (2017-08)
    Approaching Rectangular Extrudate in 3D Printing for Building and Construction by Experimental Iteration of Nozzle Design
  119. Keating Steven, Spielberg Nathan, Klein John, Oxman Neri (2014-05)
    A Compound Arm Approach to Digital Construction:
    A Mobile Large-Scale Platform for On-Site Sensing, Design, and Digital Fabrication
  120. Takashima Hiroyuki, Miyagai Kiyotaka, Hashida Toshiyuki, Li Victor (2002-09)
    A Design Approach for the Mechanical Properties of Polypropylene-Discontinuous-Fiber-Reinforced Cementitious Composites by Extrusion-Molding