Skip to content

Towards Innovative and Sustainable Buildings (2024-04)

A Comprehensive Review of 3D Printing in Construction

10.1016/j.autcon.2024.105417

 Hassan Habibelrahman,  Rodriguez-Ubinas Edwin,  al Tamimi Adil, Trepci Esra,  Mansouri Abraham,  Almehairbi Khalfan
Journal Article - Automation in Construction, Vol. 163, No. 105417

Abstract

Driven by the rapid evolution of 3D printing technology, the construction industry is on the verge of a momentous revolutionary shift. The implementation of construction 3D printing (C3DP) or additive construction (AC) is rewriting the established conventions of traditional building methods. The efficiency and versatility demonstrated by C3DP have the potential not only to revolutionize construction techniques but also to address persistent industry challenges. This paper provides an updated and comprehensive review of AC, drawing on insights from industry reports and post-2016 academic research. Its primary aim is to bridge the gap between academia and industry, thereby offering researchers, professionals, and policymakers a complete review of the state-of-the-art of C3DP as well as the latest technological advancements. It delves into various aspects of 3DCP, including printing systems, materials, thermal performance, current limitations, and sustainability considerations, providing valuable insights and shaping a roadmap for future research endeavors.

112 References

  1. Abdalla Hadeer, Fattah Kazi, Abdallah Mohamed, Tamimi Adil (2021-10)
    Environmental Footprint and Economics of a Full-Scale 3D Printed House
  2. Adaloudis Max, Bonnin Roca Jaime (2021-05)
    Sustainability Tradeoffs in the Adoption of 3D Concrete Printing in the Construction Industry
  3. Agustí-Juan Isolda, Müller Florian, Hack Norman, Wangler Timothy et al. (2017-04)
    Potential Benefits of Digital Fabrication for Complex Structures:
    Environmental Assessment of a Robotically Fabricated Concrete Wall
  4. Ahmed Ghafur (2023-01)
    A Review of 3D Concrete Printing:
    Materials and Process Characterization, Economic Considerations and Environmental Sustainability
  5. Alchaar Aktham, Tamimi Adil (2020-10)
    Mechanical Properties of 3D Printed Concrete in Hot Temperatures
  6. Alghamdi Hussam, Neithalath Narayanan (2019-07)
    Synthesis and Characterization of 3D Printable Geopolymeric Foams for Thermally Efficient Building Envelope Materials
  7. Ali Md., Issayev Gani, Shehab Essam, Sarfraz Shoaib (2022-02)
    A Critical Review of 3D Printing and Digital Manufacturing in Construction Engineering
  8. Ambily Parukutty, Kaliyavaradhan Senthil, Rajendran Neeraja (2023-05)
    Top Challenges to Widespread 3D Concrete Printing Adoption:
    A Review
  9. Araújo Rísia, Martinelli Antônio, Cabral Kleber, Dantas André et al. (2022-08)
    Thermal Performance of Cement-Leca Composites for 3D Printing
  10. Avrutis Daniel, Nazari Ali, Sanjayan Jay (2019-02)
    Industrial Adoption of 3D Concrete Printing in the Australian Market
  11. Bai Gang, Wang Li, Ma Guowei, Sanjayan Jay et al. (2021-03)
    3D Printing Eco-Friendly Concrete Containing Under-Utilised and Waste Solids as Aggregates
  12. Batikha Mustafa, Jotangia Rahul, Baaj Mohamad, Mousleh Ibrahim (2021-12)
    3D Concrete Printing for Sustainable and Economical Construction:
    A Comparative Study
  13. Bedarf Patrick, Dutto Alessandro, Zanini Michele, Dillenburger Benjamin (2021-08)
    Foam 3D Printing for Construction:
    A Review of Applications, Materials, and Processes
  14. Bhattacherjee Shantanu, Basavaraj Anusha, Rahul Attupurathu, Santhanam Manu et al. (2021-06)
    Sustainable Materials for 3D Concrete Printing
  15. Bong Shin, Nematollahi Behzad, Xia Ming, Ghaffar Seyed et al. (2022-04)
    Properties of Additively Manufactured Geopolymer Incorporating Mineral-Wollastonite-Micro-Fibers
  16. Bong Shin, Xia Ming, Nematollahi Behzad, Shi Caijun (2021-04)
    Ambient Temperature Cured ‘Just-Add-Water’ Geopolymer for 3D Concrete Printing Applications
  17. Cesaretti Giovanni, Dini Enrico, Kestelier Xavier, Colla Valentina et al. (2013-08)
    Building Components for an Outpost on the Lunar Soil by Means of a Novel 3D Printing Technology
  18. Chen Yu, Figueiredo Stefan, Li Zhenming, Chang Ze et al. (2020-03)
    Improving Printability of Limestone-Calcined-Clay-Based Cementitious Materials by Using Viscosity-Modifying Admixture
  19. Chen Hao, Zhang Daobo, Chen Peng, Li Ning et al. (2023-03)
    A Review of the Extruder System Design for Large-Scale Extrusion-Based 3D Concrete Printing
  20. Cho Seung, Kruger Jacques, Rooyen Algurnon, Zijl Gideon (2021-03)
    Rheology and Application of Buoyant Foam-Concrete for Digital Fabrication
  21. Chougan Mehdi, Ghaffar Seyed, Nematollahi Behzad, Sikora Paweł et al. (2022-09)
    Effect of Natural and Calcined-Halloysite-Clay-Minerals as Low-Cost-Additives on the Performance of 3D Printed Alkali-Activated Materials
  22. Craveiro Flávio, Bártolo Helena, Gale Andrew, Duarte José et al. (2017-07)
    A Design Tool for Resource-Efficient Fabrication of 3D Graded Structural Building Components Using Additive Manufacturing
  23. Cuevas Villalobos Karla, Chougan Mehdi, Martin Falk, Ghaffar Seyed et al. (2021-05)
    3D Printable Lightweight Cementitious Composites with Incorporated Waste-Glass-Aggregates and Expanded Microspheres:
    Rheological, Thermal and Mechanical Properties
  24. Dey Dhrutiman, Panda Biranchi (2022-10)
    An Experimental Study of Thermal Performance of 3D Printed Concrete Slabs
  25. Farina Ilenia, Fabbrocino F., Carpentieri G., Modano M. et al. (2015-12)
    On the Reinforcement of Cement Mortars through 3D Printed Polymeric- and Metallic-Fibers
  26. Furet Benoît, Poullain Philippe, Garnier Sébastien (2019-04)
    3D Printing for Construction Based on a Complex Wall of Polymer-Foam and Concrete
  27. Gomaa Mohamed, Jabi Wassim, Soebarto Veronica, Xie Yi (2022-01)
    Digital Manufacturing for Earth Construction:
    A Critical Review
  28. Gomaa Mohamed, Jabi Wassim, Veliz-Reyes Alejandro, Soebarto Veronica (2021-01)
    3D Printing System for Earth-Based Construction:
    Case Study of Cob
  29. Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
    Large-Scale 3D Printing of Ultra-High-Performance Concrete:
    A New Processing Route for Architects and Builders
  30. Haar Bjorn, Kruger Jacques, Zijl Gideon (2024-04)
    Off-Site 3D Printed Concrete Beam Design and Fabrication
  31. Hack Norman, Lauer Willi (2014-04)
    Mesh Mould:
    Robotically Fabricated Spatial Meshes as Reinforced Concrete Formwork
  32. Han Yilong, Yang Zhihan, Ding Tao, Xiao Jianzhuang (2020-08)
    Environmental and Economic Assessment on 3D Printed Buildings with Recycled Concrete
  33. He Yawen, Zhang Yamei, Zhang Chao, Zhou Hongyu (2020-05)
    Energy-Saving-Potential of 3D Printed Concrete Building with Integrated Living Wall
  34. Heywood Kate, Nicholas Paul (2023-06)
    Sustainability and 3D Concrete Printing:
    Identifying a Need for a More Holistic Approach to Assessing Environmental Impacts
  35. Huang Shuyi, Xu Weiguo, Li Yuqian (2022-04)
    The Impacts of Fabrication Systems on 3D Concrete Printing Building Forms
  36. Ibrahim Iman, Eltarabishi Fatma, Abdalla Hadeer, Abdallah Mohamed (2022-10)
    3D Printing in Sustainable Buildings:
    Systematic Review and Applications in the United Arab Emirates
  37. Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2022-08)
    Rheometry for Concrete 3D Printing:
    A Review and an Experimental Comparison
  38. Ji Guangchao, Ding Tao, Xiao Jianzhuang, Du Shupeng et al. (2019-05)
    A 3D Printed Ready-Mixed Concrete Power-Distribution Substation:
    Materials and Construction Technology
  39. Ji Yameng, Poullain Philippe, Leklou Ali (2023-09)
    The Selection and Design of Earthen Materials for 3D Printing
  40. Kaszyńska Maria, Olczyk Norbert, Techman Mateusz, Skibicki Szymon et al. (2019-02)
    Thermal-Humidity Parameters of 3D Printed Wall
  41. Katzer Jacek, Skoratko Aneta (2021-03)
    Concept of Using 3D Printing for Production of Concrete-Plastic Columns with Unconventional Cross-Sections
  42. Keating Steven, Leland Julian, Cai Levi, Oxman Neri (2017-04)
    Toward Site-Specific and Self-Sufficient Robotic Fabrication on Architectural-Scales
  43. Khalili Tari Mohammadreza, Reza Faraji Amir, Aslani Alireza, Zahedi Rahim (2023-01)
    Energy Simulation and Life Cycle Assessment of a 3D Printable Building
  44. Labonnote Nathalie, Rønnquist Anders, Manum Bendik, Rüther Petra (2016-09)
    Additive Construction:
    State of the Art, Challenges and Opportunities
  45. Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
    Hardened Properties of High-Performance Printing Concrete
  46. Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
    Mix-Design and Fresh Properties for High-Performance Printing Concrete
  47. Lim Sungwoo, Buswell Richard, Le Thanh, Austin Simon et al. (2011-07)
    Developments in Construction-Scale Additive Manufacturing Processes
  48. Lin Jia, Wu Xiong, Yang Wen, Zhao Ri et al. (2018-02)
    The Influence of Fine Aggregates on the 3D Printing Performance
  49. Liu Zhixin, Li Mingyang, Weng Yiwei, Wong Teck et al. (2018-12)
    Mixture-Design-Approach to Optimize the Rheological Properties of the Material Used in 3D Cementitious Material-Printing
  50. Liu Junli, Setunge Sujeeva, Tran Jonathan (2022-07)
    3D Concrete Printing with Cement-Coated Recycled Crumb Rubber:
    Compressive and Microstructural Properties
  51. Long Wujian, Lin Can, Tao Jie-Lin, Ye Taohua et al. (2021-02)
    Printability and Particle-Packing of 3D Printable Limestone-Calcined-Clay-Cement Composites
  52. Lowke Dirk, Dini Enrico, Perrot Arnaud, Weger Daniel et al. (2018-07)
    Particle-Bed 3D Printing in Concrete Construction:
    Possibilities and Challenges
  53. Ma Guowei, A Ruhan, Xie Panpan, Pan Zhu et al. (2022-01)
    3D Printable Aerogel-Incorporated Concrete:
    Anisotropy Influence on Physical, Mechanical, and Thermal Insulation Properties
  54. Mai (née Dressler) Inka, Brohmann Leon, Freund Niklas, Gantner Stefan et al. (2021-10)
    Large Particle 3D Concrete Printing:
    A Green and Viable Solution
  55. Mansouri Abraham, Binali Alreem, Aljawi Abdulla, Alhammadi Ahmed et al. (2022-10)
    Thermal Modeling of the Convective Heat-Transfer in the Large Air-Cavities of the 3D Concrete Printed Walls
  56. Marais Hannelie, Christen Heidi, Cho Seung, Villiers Wibke et al. (2021-03)
    Computational Assessment of Thermal Performance of 3D Printed Concrete Wall Structures with Cavities
  57. Markin Slava, Nerella Venkatesh, Schröfl Christof, Guseynova Gyunay et al. (2019-07)
    Material-Design and Performance-Evaluation of Foam-Concrete for Digital Fabrication
  58. Mechtcherine Viktor, Grafe Jasmin, Nerella Venkatesh, Spaniol Erik et al. (2018-05)
    3D Printed Steel-Reinforcement for Digital Concrete Construction:
    Manufacture, Mechanical Properties and Bond Behavior
  59. Mechtcherine Viktor, Nerella Venkatesh, Will Frank, Näther Mathias et al. (2019-08)
    Large-Scale Digital Concrete Construction:
    CONPrint3D Concept for On-Site, Monolithic 3D Printing
  60. Mendoza Reales Oscar, Duda Pedro, Silva Emílio, Paiva Maria et al. (2019-06)
    Nanosilica-Particles as Structural Buildup Agents for 3D Printing with Portland Cement-Pastes
  61. Mohammad Malek, Masad Eyad, Seers Thomas, Ghamdi Sami (2020-07)
    High-Performance Lightweight Concrete for 3D Printing
  62. Mohan Manu, Rahul Attupurathu, Dam Benjamin, Zeidan Talina et al. (2022-02)
    Performance Criteria, Environmental Impact and Cost-Assessment for 3D Printable Concrete Mixtures
  63. Muthukrishnan Shravan, Kua Harn, Yu Ling, Chung Jacky (2020-05)
    Fresh Properties of Cementitious Materials Containing Rice-Husk-Ash for Construction 3D Printing
  64. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-07)
    Post-processing Methods to Improve Strength of Particle-Bed 3D Printed Geopolymer for Digital Construction Applications
  65. Noaimat Yazeed, Ghaffar Seyed, Chougan Mehdi, Kheetan Mazen (2022-12)
    A Review of 3D Printing Low-Carbon Concrete with One-Part Geopolymer:
    Engineering, Environmental and Economic Feasibility
  66. Panda Biranchi, Lim Jian, Tan Ming (2019-02)
    Mechanical Properties and Deformation Behavior of Early-Age Concrete in the Context of Digital Construction
  67. Paritala Spandana, Singaram Kailash, Bathina Indira, Khan Mohd et al. (2023-08)
    Rheology and Pumpability of Mix Suitable for Extrusion-Based Concrete 3D Printing:
    A Review
  68. Paul Suvash, Tay Yi, Panda Biranchi, Tan Ming (2017-08)
    Fresh and Hardened Properties of 3D Printable Cementitious Materials for Building and Construction
  69. Perrot Arnaud, Mélinge Yannick, Rangeard Damien, Micaelli Francesca et al. (2012-06)
    Use of Ram Extruder as a Combined Rheo-Tribometer to Study the Behavior of High-Yield-Stress Fluids at Low Strain-Rate
  70. Perrot Arnaud, Rangeard Damien, Courteille Eric (2018-04)
    3D Printing of Earth-Based Materials:
    Processing Aspects
  71. Pessoa Ana Sofia, Guimarães Ana, Lucas Sandra, Simões Nuno (2021-02)
    3D Printing in the Construction Industry:
    A Systematic Review of the Thermal Performance in Buildings
  72. Putten Jolien, Deprez Maxim, Cnudde Veerle, Schutter Geert et al. (2019-09)
    Microstructural Characterization of 3D Printed Cementitious Materials
  73. Puzatova (nee Sharanova) Anastasiia, Shakor Pshtiwan, Laghi Vittoria, Dmitrieva Maria (2022-11)
    Large-Scale 3D Printing for Construction Application by Means of Robotic Arm and Gantry 3D Printer:
    A Review
  74. Qaidi Shaker, Yahia Ammar, Tayeh B., Unis H. et al. (2022-10)
    3D Printed Geopolymer Composites:
    A Review
  75. Ramakrishnan Sayanthan, Muthukrishnan Shravan, Sanjayan Jay, Pasupathy Kirubajiny (2021-08)
    Concrete 3D Printing of Lightweight Elements Using Hollow-Core Extrusion of Filaments
  76. Rehman Atta, Kim Jung-Hoon (2021-07)
    3D Concrete Printing:
    A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics
  77. Sarakinioti Maria, Turrin Michela, Konstantinou Thaleia, Tenpierik Martin et al. (2018-03)
    Developing an Integrated 3D Printed Façade with Complex Geometries for Active Temperature-Control
  78. Sayegh Sameh, Romdhane Lotfi, Manjikian Solair (2022-03)
    A Critical Review of 3D Printing in Construction:
    Benefits, Challenges, and Risks
  79. Schutter Geert, Lesage Karel, Mechtcherine Viktor, Nerella Venkatesh et al. (2018-08)
    Vision of 3D Printing with Concrete:
    Technical, Economic and Environmental Potentials
  80. Shakor Pshtiwan, Chu Shaohua, Puzatova (nee Sharanova) Anastasiia, Dini Enrico (2022-01)
    Review of Binder-Jetting 3D Printing in the Construction Industry
  81. Shakor Pshtiwan, Sanjayan Jay, Nazari Ali, Nejadi Shami (2017-02)
    Modified 3D Printed Powder to Cement-Based Material and Mechanical Properties of Cement Scaffold Used in 3D Printing
  82. Shilar Fatheali, Ganachari Sharanabasava, Patil Veerabhadragouda, Bhojaraja B. et al. (2023-08)
    A Review of 3D Printing of Geopolymer Composites for Structural and Functional Applications
  83. Sikora Paweł, Chung Sang-Yeop, Liard Maxime, Lootens Didier et al. (2021-02)
    The Effects of Nano-Silica on the Fresh and Hardened Properties of 3D Printable Mortars
  84. Skibicki Szymon, Kaszyńska Maria, Wahib Nawid, Techman Mateusz et al. (2020-07)
    Properties of Composite Modified with Limestone-Powder for 3D Concrete Printing
  85. Soto Borja, Agustí-Juan Isolda, Hunhevicz Jens, Joss Samuel et al. (2018-05)
    Productivity of Digital Fabrication in Construction:
    Cost and Time-Analysis of a Robotically Built Wall
  86. Souza Marcelo, Ferreira Igor, Moraes Elisângela, Senff Luciano et al. (2020-09)
    3D Printed Concrete for Large-Scale Buildings:
    An Overview of Rheology, Printing Parameters, Chemical Admixtures, Reinforcements, and Economic and Environmental Prospects
  87. Strohle Max, Sadique Monower, Dulaimi Anmar, Kadhim Mustafa (2022-11)
    Prospect and Barrier of 3D Concrete:
    A Systematic Review
  88. Subrin Kévin, Bressac Thomas, Garnier Sébastien, Ambiehl Alexandre et al. (2018-09)
    Improvement of the Mobile Robot Location Dedicated for Habitable House Construction by 3D Printing
  89. Suntharalingam Thadshajini, Upasiri Irindu, Gatheeshgar Perampalam, Poologanathan Keerthan et al. (2021-09)
    Energy Performance of 3D Printed Concrete Walls:
    A Numerical Study
  90. Tamimi Adil, Alqamish Habib, Khaldoune Ahlam, Alhaidary Haidar et al. (2023-03)
    Framework of 3D Concrete Printing Potential and Challenges
  91. Tamimi Adil, Hassan Habibelrahman, Rodriguez-Ubinas Edwin, Alhaidary Haidar et al. (2023-11)
    Thermal Performance of 3D Concrete Printed Walls:
    Calculated and In-Situ Measured U-Values
  92. Tay Yi, Panda Biranchi, Paul Suvash, Mohamed Nisar et al. (2017-05)
    3D Printing Trends in Building and Construction Industry:
    A Review
  93. Tinoco Matheus, Mendonça Érica, Fernandez Letízia, Caldas Lucas et al. (2022-04)
    Life Cycle Assessment and Environmental Sustainability of Cementitious Materials for 3D Concrete Printing:
    A Systematic Literature Review
  94. Tobi A., Omar S., Yehia Z., Al-Ojaili S. et al. (2018-03)
    Cost Viability of 3D Printed House in UK
  95. Volpe Stelladriana, Sangiorgio Valentino, Fiorito Francesco, Varum Humberto (2022-12)
    Overview of 3D Construction Printing and Future Perspectives:
    A Review of Technology, Companies and Research Progression
  96. Volpe Stelladriana, Sangiorgio Valentino, Petrella Andrea, Coppola Armando et al. (2021-08)
    Building Envelope Prefabricated with 3D Printing Technology
  97. Wangler Timothy, Lloret-Fritschi Ena, Reiter Lex, Hack Norman et al. (2016-10)
    Digital Concrete:
    Opportunities and Challenges
  98. Weger Daniel, Gehlen Christoph (2021-01)
    Particle-Bed Binding by Selective Paste-Intrusion:
    Strength and Durability of Printed Fine-Grain Concrete Members
  99. Weng Yiwei, Li Mingyang, Ruan Shaoqin, Wong Teck et al. (2020-03)
    Comparative Economic, Environmental and Productivity-Assessment of a Concrete Bathroom Unit Fabricated Through 3D Printing and a Pre-Cast Approach
  100. Weng Yiwei, Li Mingyang, Tan Ming, Qian Shunzhi (2018-01)
    Design 3D Printing Cementitious Materials via Fuller-Thompson-Theory and Marson-Percy-Model
  101. Xiao Jianzhuang, Ji Guangchao, Zhang Yamei, Ma Guowei et al. (2021-06)
    Large-Scale 3D Printing Concrete Technology:
    Current Status and Future Opportunities
  102. Xiao Jianzhuang, Lv Zhenyuan, Duan Zhenhua, Hou Shaodan (2022-03)
    Study on Preparation and Mechanical Properties of 3D Printed Concrete with Different Aggregate-Combinations
  103. Xu Yading, Šavija Branko (2019-06)
    Development of Strain-Hardening Cementitious Composite (SHCC) Reinforced with 3D Printed Polymeric Reinforcement:
    Mechanical Properties
  104. Yang Hongxiong, Chung Jacky, Chen Yuhong, Li Yijia (2018-06)
    The Cost Calculation Method of Construction 3D Printing Aligned with Internet of Things
  105. Yin Xunzhi, Guo Chong, Sun Bo, Chen Honggang et al. (2023-09)
    The State of the Art in Digital Construction of Clay Buildings:
    Reviews of Existing Practices and Recommendations for Future Development
  106. Zahrani Abdullah, Alghamdi Abdulrahman, Basalah Ahmad (2022-12)
    Computational Optimization of 3D Printed Concrete Walls for Improved Building Thermal Performance
  107. Zhang Ketao, Chermprayong Pisak, Xiao Feng, Tzoumanikas Dimos et al. (2022-09)
    Aerial Additive Manufacturing with Multiple Autonomous Robots
  108. Zhang Xun, Flood Ian, Zhang Yuanxin, Moud Hashem et al. (2019-06)
    A Cost-Model to Evaluate the Economic Performance of Contour Crafting
  109. Zhang Xu, Li Mingyang, Lim Jian, Weng Yiwei et al. (2018-08)
    Large-Scale 3D Printing by a Team of Mobile Robots
  110. Zhang Jingchuan, Wang Jialiang, Dong Sufen, Yu Xun et al. (2019-07)
    A Review of the Current Progress and Application of 3D Printed Concrete
  111. Ziejewska Celina, Marczyk Joanna, Korniejenko Kinga, Bednarz Sebastian et al. (2022-04)
    3D Printing of Concrete-Geopolymer Hybrids
  112. Zuo Wenqiang, Dong Chenghao, Keita Emmanuel, Roussel Nicolas (2020-07)
    Penetration Study of Liquid in Powder-Bed for 3D Powder-Bed Printing

39 Citations

  1. Norouzi Yasaman, Dixit Manish (2026-01)
    A Review of Advantages and Challenges of Using Hempcrete for 3D Printing in Construction
  2. Tushar Fazlul, Hasan Mehedi, Hasan Kamrul, Mawa Jannatul et al. (2026-01)
    Factors Affecting Flowability and Rheological Behavior of 3D Printed Concrete:
    A Comprehensive Review
  3. Latorraca Tássia, Rangel Bárbara, Guimarães Ana (2025-12)
    Optimizing 3D-Printed Concrete Panels’ Thermal Performance with Materials, Metrics, and Generative Design
  4. Skoury Lior, Asaf Ofer, Sprecher Aaron, Menges Achim et al. (2025-12)
    Data-Informed Digital Twin for Large-Scale 3D Printing in Construction
  5. Taborda-Llano Isabella, Hoyos-Montilla Ary, Asensio Eloy, Guerrero Ana et al. (2025-12)
    Influence of the Construction Process Parameters on the Mechanical Performance and Durability of 3D Printed Concrete:
    A Systematic Review
  6. Wang Hailong, Shi Yiqing, Sun Xiaoyan, Lin Xiqiang et al. (2025-12)
    Design, Multi-Scale Structural Analysis, and Construction of Modular Prefabricated 3D-Printed Concrete Residence
  7. Luo Xiaoyu, Zhao Yuqi, Yang Min, Yao Xiaofei et al. (2025-12)
    Introducing Cement Composite Agents During Printing Process to Enhance the 3D-Printed Concrete Interfaces Between Layers and Filaments
  8. Mansouri Abraham, Mourad Bahaa, Birhane Bezawit, Denbel Nuhamin et al. (2025-11)
    Noncontact Measurement of Thermal Resistance in 3D Concrete Printing Building Envelopes Using Infrared Sensing and Arduino
  9. Abbas Yassir, Alsaif Abdulaziz (2025-11)
    Explainable Data-Driven Modeling for Optimized Mix Design of 3D-Printed Concrete:
    Interpreting Nonlinear Synergies Among Binder Components and Proportions
  10. Ruiz Pedro, Perez Pablo, Alvarado Rodrigo, Valenzuela Sebastián et al. (2025-11)
    3D Printing of Surrealist Dreams:
    Constraints, Failures, and Craftsmanship in 1:1 Digital Fabrication
  11. Khoury Eliane, Cheikh Khadija, Schutter Geert, Cazacliu Bogdan et al. (2025-11)
    Using Vacuum Mixing for 3D Printing of Mortars Made with Recycled Sand
  12. Li Shiping, Sun Yan, Qian Ye, Chen Wujun et al. (2025-11)
    Bio-Inspired Jigsaw-Interlocking Suture Interfaces for Enhanced Flexural Response of 3D-Printed Strain-Hardening Cementitious Composites
  13. Faleschini Flora, Trento Daniel, Zanini Mariano (2025-11)
    Earth as a Building Material:
    From Traditional Building Techniques to Additive Manufacturing
  14. Öztürk Ece, Borgianni Yuri, Ince Ceren (2025-10)
    3D Printing in the Construction Sector:
    Identification of Key Topics, Technologies, Applications and Relevant Factors Discussed in the Literature
  15. Mansouri Abraham, Alsuwaidi Abdulla, Binali Alreem, Binshaqooi Essa et al. (2025-09)
    Conjugate Heat Transfer and U Value Analysis of 3D Concrete Printed Envelopes with Variable‐Thickness Air Cavities in Hot‐Arid Climates
  16. Sun Hou-Qi, Zeng Jun-Jie, Xie Shan-Shan, Xia Jun-Run et al. (2025-09)
    Mechanical and Microstructural Characterization of Interlayer Bonding in Multi-Material 3D-Printed Concrete
  17. Liu Ruiying, Xiong Zhongming, Chen Xuan, Jia Qiong et al. (2025-09)
    Industrial Waste in 3D Printed Concrete:
    A Mechanistic Review on Rheological Control and Printability
  18. Ramirez Rodriguez Fatima, Ahmad Rafiq (2025-09)
    Sustainable Technology Advances for Additive Construction:
    A State-of-the-Art Review
  19. Bai Gang, Wang Li, Li Zhijian, Qu Yao et al. (2025-09)
    Integrating Prestress into 3D Printed Ultra-High Performance Concrete Composite Beams for Superior Flexural Performance
  20. Maurya Shubham, Kumar Vijay, Panda Biranchi, Borsaikia Arun et al. (2025-09)
    Inline Polymer Cable Reinforcement in 3D Concrete Printing with a Special Nozzle
  21. İlerisoy Zeynep, Takva Çağatay, Top Semahat, Gökgöz Berru et al. (2025-08)
    The Effectiveness of 3D Concrete Printing Technology in Architectural Design:
    Different Corner-Wall Combinations in 3D Printed Elements and Geometric Form Configurations in Residential Buildings
  22. Raza Muhammad, Besklubova Svetlana, Kravchenko Ekaterina, Zhong Ray (2025-07)
    Economic Viability of 3D Concrete Printing:
    A Comparative Study with Traditional Construction Method
  23. Bajwa Asad, Samarasinghe Don, Flemmer Claire, Bao Ding (2025-06)
    A Systematic Literature Review on the Thermal Behaviour of Building Elements Constructed Through 3D Concrete Printing (3DCP)
  24. Wang Xiaoqi, Zuo Tianyi, Xu Yanling, Liu Xing et al. (2025-06)
    Reinforcement Learning-Based Continuous Path Planning and Automated Concrete 3D Printing of Complex Hollow Components
  25. Hiremath Shivashankarayya, Mathapati Gururaj, Chiniwar Dundesh, Vishwanatha H. (2025-05)
    Performance Evaluation of Cementitious Composites by Designing an Extrusion System for Construction 3D Printing
  26. Wang Guihua, Zhou Jiguo, Liu Haoyun, Zhang Jianming (2025-05)
    Rheological Properties and Mechanical Durability of 3D-Printed Concrete Based on Low-Field NMR
  27. Cao Xiangpeng, Cui Hongzhi (2025-04)
    Simple Floor Nail Placement Technique to Reinforce 3D-Printed Concrete:
    An Experimental Investigation
  28. Zhang Yuying, Zhu Xiaohong, Li Muduo, Zhang Chao et al. (2025-04)
    3D Printing Technology in Concrete Construction
  29. Du Guoqiang, Sun Yan, Qian Ye (2025-03)
    In-Plane and Out-of-Plane Compressive Performance of Bio-Inspired 3D Printed Strain-Hardening Cementitious Composite Lattice Structures
  30. Mansouri Abraham, Wolde Japi, Joda Akram (2025-03)
    The Potential of Sand as a Sustainable Infill for 3D Concrete Printed Building Walls
  31. Du Guoqiang, Qian Ye (2025-01)
    Enhancing the Fracture and Flexural Behavior of 3D Printed Strain-Hardening Cementitious Composites with Nature-Inspired Single and Double Bouligand Structures
  32. Zhang Yonghong, Cui Suping, Yang Bohao, Wang Xinxin et al. (2025-01)
    Research on 3D Printing Concrete Mechanical Properties-Prediction-Model Based on Machine-Learning
  33. Li Chao, Petzold Frank (2025-01)
    Ontology-Driven Mixture-of-Domain Documentation:
    A Backbone Approach Enabling Question Answering for Additive Construction
  34. Sun Hou-Qi, Zeng Jun-Jie, Hong Guang-Yao, Zhuge Yan et al. (2025-01)
    3D Printed Functionally Graded Concrete Plates:
    Concept and Bending Behavior
  35. Lu Haoyu, Zhang Lizhi, Wang Junkai, Shi Zhaoxin et al. (2024-11)
    Penetration-Test of Sheet-Like Indenter for Yield-Stress-Assessment of 3D Printed Concrete
  36. Du Guoqiang, Qian Ye (2024-10)
    Bio-Inspired 3D Printing of Strain-Hardening Cementitious Composites Reticulated Shell-Roofs
  37. Du Guoqiang, Sun Yan, Qian Ye (2024-10)
    Nature-Inspired Approach for Enhancing the Fracture Performance of 3D Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
  38. Asaf Ofer, Bentur Arnon, Amir Oded, Larianovsky Pavel et al. (2024-09)
    A 3D Printing Platform for Design and Manufacturing of Multi-Functional Cementitious Construction Components and Its Validation for a Post-Tensioned Beam
  39. Carcassi Olga, Alon Lola (2024-08)
    Additive Manufacturing of Natural Materials

BibTeX 
@article{hass_rodr_tami_trep.2024.TIaSB,
  author            = "Habibelrahman Hassan and Edwin Rodriguez-Ubinas and Adil K. Al Tamimi and Esra Trepci and Abraham Mansouri and Khalfan Almehairbi",
  title             = "Towards Innovative and Sustainable Buildings: A Comprehensive Review of 3D Printing in Construction",
  doi               = "10.1016/j.autcon.2024.105417",
  year              = "2024",
  journal           = "Automation in Construction",
  volume            = "163",
  pages             = "105417",
}
Formatted Citation

H. Hassan, E. Rodriguez-Ubinas, A. K. A. Tamimi, E. Trepci, A. Mansouri and K. Almehairbi, “Towards Innovative and Sustainable Buildings: A Comprehensive Review of 3D Printing in Construction”, Automation in Construction, vol. 163, p. 105417, 2024, doi: 10.1016/j.autcon.2024.105417.

Hassan, Habibelrahman, Edwin Rodriguez-Ubinas, Adil K. Al Tamimi, Esra Trepci, Abraham Mansouri, and Khalfan Almehairbi. “Towards Innovative and Sustainable Buildings: A Comprehensive Review of 3D Printing in Construction”. Automation in Construction 163 (2024): 105417. https://doi.org/10.1016/j.autcon.2024.105417.