Skip to content

#innovation

Keywords by Co - Occurrence

  1. Okangba Stanley, Ngcobo Ntebo, Mahachi Jeffrey (2025-12)
    Bridging Innovation and Governance:
    A UTAUT-Based Mixed-Method Study of 3D Concrete Printing Technology Acceptance in South Africa
  2. Zhong Kuangnan, Huang Kaiyun, Liu Zhichao, Wang Fazhou et al. (2025-10)
    Dual Strategies for Enhancing Carbonation Curing in 3D Printing Steel Slag Mortars:
    Material Modification and Curing Process Innovation
  3. Bhowmik Anirban, Bhattacharjee Biswajoy, Sahu Prakash (2025-10)
    3D Concrete Printing:
    Pioneering Innovations and Recent Development
  4. Murtaza Ghulam, Baldinelli Giorgio (2025-08)
    Revolutionizing Architecture:
    3D Printing in Large Construction Industry and Strategic Innovations for Enhanced Performance
  5. Motiani Ronak, Sylvain Saha, Dalal Sejal, Vora Jay et al. (2025-08)
    Innovative Reinforcement Techniques for 3D-Printed Concrete:
    The Impact of Shape Memory Alloys on Flexural Strength and Crack Mitigation
  6. Pereira Carolina, Vieira Henrique, Gonçalves Nuno, Ascensão Guilherme et al. (2025-05)
    Innovative Waste-Containing 3D-Printed Geopolymer Structures for Enhanced Acoustic Comfort in Built Environments
  7. Bhattacharjee Biswajoy, Sahu Prakash (2025-05)
    Recent Innovations and Implementations of 3D Printing in the Building and Construction Sector
  8. Nan Bo, Qiao Youxin, Leng Junjie, Bai Yikui (2025-01)
    Advancing Structural Reinforcement in 3D Printed Concrete:
    Current Methods, Challenges, and Innovations
  9. Dias José, Brandão Filipe, Castro André, Félix Maria (2024-11)
    Designing Tomorrow's Coral Reefs:
    3DCP Potential in Innovative Artificial Coral-Reefs-Systems Development
  10. Hassan Zohaib, Raza Saim, Shafei Behrouz, Mahoutian Mehrdad et al. (2024-11)
    Innovations to Improve 3D Concrete Printing of Portland Cement-Steel-Slag Blended Mortars
  11. Yasin Mazhar, Siddiqi Zahid, Ur Rehman Atteq, Noshin Sadaf et al. (2024-11)
    Innovative Early-Age Mechanical Properties of 3D Printable Mortar Enhanced with SBR-Latex and Kaolin
  12. Shahzad Qamar, Li Fangyuan (2024-11)
    Assessing the Load-Bearing Capacity of 3D Printed Concrete at Early-Ages:
    An Innovative Approach
  13. Du Guoqiang, Qian Ye (2024-10)
    Bio-Inspired Innovations in 3D Concrete Printing:
    Structures, Materials and Applications
  14. Madrid Javier, Ortega Guillermo, Olsson Nils, Tenorio Ríos José (2024-10)
    3D Constructing:
    Exploring the Potential of 3D Concrete and Clay Printing with Generative Design for Architectural Innovation
  15. Khan Mehran, McNally Ciaran (2024-05)
    Recent Developments on Low-Carbon 3D Printing Concrete:
    Revolutionizing Construction Through Innovative Technology
  16. Hassan Habibelrahman, Rodriguez-Ubinas Edwin, Tamimi Adil, Trepci Esra et al. (2024-04)
    Towards Innovative and Sustainable Buildings:
    A Comprehensive Review of 3D Printing in Construction
  17. Labuda Igor, Pugliese Federica, Dzwierzynska Jolanata (2024-03)
    An Innovative Concept for 3D Sand-Printed Sustainable Refugee Shelters in a Sandy Desert in a Hot and Dry Climate
  18. Ruitinga Volker, Avramiea Emma (2023-12)
    Custom-Made Print-Heads Empowering 3D Printed Concrete:
    Innovations in Digital Design and Fabrication of Complex Prefabricated Elements
  19. Coniglo Alfonso, Palmiotta Annarota, Amato Michele, Gigliotti Rosario (2023-11)
    Earth-3D Printing for Non-Structural Elements of Modular Steel Buildings:
    Proposal for an Innovative and Sustainable Construction System
  20. Meng Qingcheng, Hu Lei, Li Mingjian, Qi Xin (2023-09)
    Assessing the Environmental Impact of Building Life Cycle:
    A Carbon-Reduction-Strategy Through Innovative Design, Intelligent Construction, and Secondary Utilization
  21. Shahzad Qamar, Li Fangyuan (2023-09)
    An Innovative Method for Buildability-Assessment of 3D Printed Concrete at Early-Ages
  22. Fragnito Andrea, Iasiello Marcello, Mauro Gerardo, Menna Costantino et al. (2023-08)
    Topology-Optimization to Design Innovative High Thermal Resistance 3D Printed Walls
  23. Hu Rongbo, Pan Wen, Iturralde Kepa, Linner Thomas et al. (2023-07)
    Construction Automation and Robotics for Concrete Construction:
    Case Studies on Research, Development, and Innovations
  24. Zhang Sisi, Kalus Matthias, Engel Sven, Hegger Josef et al. (2023-06)
    Development of an Innovative 3D Printing Process for Reinforced Concrete:
    AMoRC Method
  25. Anleu Paula, Pape Yann, Chen Qiyi, Advincula Rigoberto et al. (2023-06)
    An Innovative Carbonated Cementitious Material and Its Printability and Carbon Mineralization Capacity
  26. Mogaji Iseoluwa, Mewomo Modupe, Toyin James (2023-05)
    Key Barriers to the Adoption of 3D Printing Innovation in Construction:
    A Review of Empirical Studies
  27. Du Wenfeng, Zhu Liming, Zhang Hao, Zhou Zhiyong et al. (2023-01)
    Experimental and Numerical Investigation of an Innovative 3DPC Thin-Shell Structure
  28. Bischof Patrick, Mata-Falcón Jaime, Kaufmann Walter (2022-08)
    Fostering Innovative and Sustainable Mass-Market Construction Using Digital Fabrication with Concrete
  29. Hu Hao, Cao Xiaoxiao, Zhang Tao, Chen Zhenfu et al. (2022-05)
    Three-Dimensional Printing Materials for Cultural Innovation Products of Historical Buildings
  30. Suntharalingam Thadshajini, Gatheeshgar Perampalam, Upasiri Irindu, Poologanathan Keerthan et al. (2021-06)
    Fire Performance of Innovative 3D Printed Concrete Composite Wall Panels:
    A Numerical Study
  31. Suntharalingam Thadshajini, Gatheeshgar Perampalam, Upasiri Irindu, Poologanathan Keerthan et al. (2021-02)
    Numerical Study of Fire and Energy Performance of Innovative Lightweight 3D Printed Concrete Wall-Configurations in Modular Building System
  32. Fratello Virginia, Rael Ronald (2020-05)
    Innovating Materials for Large-Scale Additive Manufacturing:
    Salt, Soil, Cement and Chardonnay
  33. Lauff Philipp, Fischer Oliver (2019-04)
    Efficient Ultra-High Performance Concrete with Innovative Trajectory-Oriented "Reinforcement"
  34. Herrmann Eric, Mainka Jeldrik, Lindemann Hendrik, Wirth Franz et al. (2018-07)
    Digitally Fabricated Innovative Concrete Structures
  35. Ghaffar Seyed, Corker Jorge, Fan Mizi (2018-05)
    Additive Manufacturing Technology and Its Implementation in Construction as an Eco-Innovative Solution
  36. Tomé Ana, Vizotto Isaías, Valença Jónatas, Júlio Eduardo (2018-02)
    Innovative Method for Automatic Shape-Generation and 3D Printing of Reduced-Scale Models of Ultra-Thin Concrete Shells
  37. Biswas Kaushik, Rose James, Eikevik Leif, Guerguis Maged et al. (2016-11)
    Additive Manufacturing Integrated Energy:
    Enabling Innovative Solutions for Buildings of the Future
  38. Hwang Dooil, Khoshnevis Behrokh (2005-11)
    An Innovative Construction Process-Contour Crafting (CC)
  39. Khoshnevis Behrokh, Dutton Rosanne (1998-01)
    Innovative Rapid Prototyping Process Makes Large-Sized, Smooth-Surfaced Complex Shapes in a Wide Variety of Materials