Skip to content

#enhancement

Keywords by Co - Occurrence

  1. Lv Liping, He Jing, Chen Jiazhe, Xu Dan et al. (2026-04)
    Integrated Multi-Objective Optimization for Multi-Head Collaborative 3D Concrete Printing via a Trinary-Tree Enhanced Genetic Algorithm
  2. Ramakrishnan Sayanthan, Ramesh Akilesh, Pasupathy Kirubajiny, Mechtcherine Viktor et al. (2026-04)
    Enhancing the Printability and Sustainability of 3D Concrete Printing Using Recycled Waste Glass as a Cement Substitute
  3. Sun Hou-Qi, Zhou Jie-Kai, Xia Jun-Run, Zheng Jun-Jie et al. (2026-03)
    Interface Bonding Enhancement for FRP Grid Reinforced 3D-Printed Concrete Structures
  4. Luo Zhenhua, Sun Yuting, Mbabazi Justin, Du Qianyu et al. (2026-03)
    3D-Printed Concrete Structural Supercapacitor with PVA-KOH Enhanced Polymer Mortar Electrolyte
  5. Jiang Youbau, Zhang Zupan, Wen Jun, Gao Pengxiang et al. (2026-03)
    Toothed Nozzle Optimization for Enhancement of Interlayer Tensile Strength of 3D-Printed Concrete with CTGAN and XGBoost Model
  6. Omarov Bekarys, Ali Md., Memon Shazim (2026-03)
    A Novel Method to Enhance Interlayer Bond in 3D-Printed Concrete Using Dry-Powder Application of Supplementary Cementitious Materials
  7. Amjad Umar, Irshidat Mohammad, Maurya Muni, Rizmin Khadeejath et al. (2026-03)
    Sustainable 3D Mortar Printing:
    Material Optimization and Ultrasonic Characterization for Enhanced Construction Performance
  8. Hinge Pawan, Bhagat Rajesh, Nandurkar Bhupesh, Pande Prashant et al. (2026-03)
    Sustainable 3D-Printed Concrete:
    Integrating E-Waste Plastics for Enhanced Printability, Mechanical Strength, and Long-Term Durability Sets
  9. Liu Huawei, Dai Meiling, Liu Chao, Du Hongjian (2026-02)
    Targeted Enhancement Strategy for the Rebar Interface Bond in 3D Printed Coarse Aggregate Concrete: Performance Evaluation and Mechanistic Insights
  10. Oh Sangwoo, Lee Jinsuk, Choi Seongcheol (2026-02)
    Enhancing the Buildability of CSA Cement/OPC-Blended Mortar in 3D Printing:
    Optimizing CSA Cement and Water Contents Using a Statistical Approach
  11. Yuan Yong, Zia Syed, Sheikh Taimur, Irfan ul Hassan Muhammad et al. (2026-02)
    Enhancing Interlayer Bond Strength of 3D-Printed Concrete Through Microstructural Densification by Means of Incorporating Sugarcane Bagasse Ash
  12. Sun Hou-Qi, Zeng Jun-Jie, Wu Chao-Lan, Zhou Jie-Kai et al. (2026-02)
    In-Process Embedded FRP Grid for Enhanced Flexural Performance of 3D Printed Concrete Plates
  13. Kopitha Kirushnapillai, Rajeev Pathmanathan, Sanjayan Jay, Elakneswaran Yogarajah (2026-02)
    Buildability Enhancement of 3D Printed Concrete Using Carbonated Water and Partial Replacement of OPC with Reactive MgO
  14. Fang Yuan, Zhang Wenyang, Xiao Yuan, Zhang Zuhua et al. (2026-02)
    Enhancing the Printability and Mechanical Strength of 3D-Printed Geopolymers through Li2O-Al2O3-SiO2-H2O System Regulation
  15. Kazemian Mona, Rogers Carl (2026-01)
    3D Printed Green Walls:
    Enhancing Living Systems Through Digital Fabrication
  16. Li Junjie, Li Yangbo, Ge Xianqiang, Li Ke et al. (2026-01)
    Strength Enhancement of 3D-Printed Phosphogypsum Concrete Based on Synergistic Activation of Multi-Solid Wastes
  17. Chen Guixiang, Zhang Xuanzheng, Wang Jun, Hu Kui et al. (2026-01)
    Anisotropy and Mechanical Enhancement of 3D-Printed Vitrified Microsphere Thermal Insulation Mortar Incorporating Basalt Fiber Under Different Printing Paths
  18. Zhang Xin, Xu Xinglong, Liu Xianda, Sun Junbo et al. (2026-01)
    Enhancing Electromagnetic Wave Absorption in 3D-Printed Concrete with Superabsorbent Polymers for High Performance
  19. Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2026-01)
    Enhancing Fiber Alignment and Tensile Properties of 3D-Printed Ultra-High Performance Strain-Hardening Cementitious Composites by Nozzle Channel Design
  20. Nadais Mariana, Cunha Rui, Pessoa Ana Sofia, Delgado João et al. (2026-01)
    Enhancing Indoor Environmental Quality Through Real-Time Monitoring:
    A Case Study of a 3D-Printed House
  21. Brandão Filipe, Dias José, Aroso Francisca, Reis Rui et al. (2026-01)
    Upcycling of Waste Fibers:
    Enhancing Structural Integrity in 3DCP Through Fiber Reinforcement
  22. Alvarez Eduardo, Curth Alexander, Mueller Caitlin, Norford Leslie (2026-01)
    Enhancing the Dynamic Thermal Performance of Wall Components Through Shape Optimization:
    Method and Application to Extruded Blocks and 3D-Printed Walls
  23. Huang Bo, Liu Chang, Sun Junbo, Wang Yufei et al. (2025-12)
    Optimized Synergy of Fiberglass Mesh and PP Fibers-Modified Structural Adhesive for Enhanced Mechanical and Microstructural Performance in 3D Printing Concrete
  24. Bang Jin, Ha Seong, Jun Yubin, Yim Hong (2025-12)
    Optimal Casting Window Defined by Electrical Resistivity for Enhancing Interfacial Bond Strength in 3D Printed-Cast Concrete Composites
  25. Basith Mydeen Pitchai Mohamed Abdul (2025-12)
    Polymer-Enhanced Composites for 3D Concrete Printing:
    A Review of Materials, Processes, and Performance
  26. Wang Xiangyu, Li Baidian, Wu Fei, Gu Kan et al. (2025-12)
    Enhancing Interlayer Properties and Sustainability of 3D-Printed UHPC with Antimony Tailings
  27. Zhang Genbao, Chen Lingke, Liu Miao, Morsy Amr et al. (2025-12)
    Enhancing the Shear Properties of U-Shaped Steel Wire Mesh Reinforced 3D Printed Composites
  28. Iqbal Imtiaz, Kasim Tala, Besklubova Svetlana, Mustafa Ali et al. (2025-12)
    Passive Determination of Anisotropic Compressive Strength of 3D Printed Concrete Using Multiple Neural Networks Enhanced with Explainable Machine Learning (XML)
  29. Iqbal Imtiaz, Inqiad Waleed, Kasim Tala, Besklubova Svetlana et al. (2025-12)
    Strength Characterisation of Fly Ash Blended 3D Printed Concrete Enhanced with Explainable Machine Learning
  30. Rojas Jorge, Hasanzadeh Sogand (2025-12)
    A Unified Workflow for Enhanced Efficiency in 3D Concrete Printing Using a 6 DoF Robotic Arm
  31. Feng Xiaowei, Carvelli Valter, Pan Dongjiang, Zhu Chuankai et al. (2025-12)
    Additive Manufacturing of Hybrid Straw-Soil-Cement Materials for Enhanced Mine Models
  32. Ramezani Mahyar, Kilic Ugur, Sherif Muhammad, Arce Gabriel et al. (2025-12)
    Rheological Properties and Mechanical Response of Bio-Based Graphene Enhanced Additively Manufactured Cementitious Composites
  33. Luo Xiaoyu, Zhao Yuqi, Yang Min, Yao Xiaofei et al. (2025-12)
    Introducing Cement Composite Agents During Printing Process to Enhance the 3D-Printed Concrete Interfaces Between Layers and Filaments
  34. Li Jiannan, Singh Amardeep, Zhao Yasong, Sun Jingting et al. (2025-11)
    Enhancing Thermo-Mechanical and Moisture Properties of 3D-Printed Concrete Through Recycled Ultra-Fine Waste Glass Powder:
    Corrigendum
  35. Li Shiping, Sun Yan, Qian Ye, Chen Wujun et al. (2025-11)
    Bio-Inspired Jigsaw-Interlocking Suture Interfaces for Enhanced Flexural Response of 3D-Printed Strain-Hardening Cementitious Composites
  36. Lim Sean, Lee Junghyun, Bawarith Nuran, Paul Suvash et al. (2025-11)
    The Efficacy of Self-Curing Agents on Enhanced Internal Curing and Accelerated Carbonation with CO2-Steam Integrated 3D Concrete Printing
  37. Sun Yuhang, Li Chuang, Liu Xiongfei, Wang Li et al. (2025-11)
    Enhancing Sulfate Resistance of Spray-Based 3D Printed Recycled Tunnel Slag Concrete Through Polypropylene Fiber Optimization
  38. Li Yeou-Fong, Lin Chih-Chieh, Syu Jin-Yuan, Huang Chih-Hong et al. (2025-10)
    Enhancing 3D-Printed Cement Mortar with Recycled PCB Glass Fibers:
    Printability, Mechanical Strength, and FEM-Based Structural Assessment
  39. González-Aviña J., Hosseinpoor Masoud, Yahia Ammar, Kohandelnia Mojtaba et al. (2025-10)
    Anionic Biopolymers to Enhance Concrete Rheological Properties for 3D Printing Applications
  40. Zhang Chao, Zhu Xiaohong, Li Muduo, Zhang Yuying et al. (2025-10)
    Enhancing Interface Adhesion of 3D Printable Concrete by Biochar Integration
  41. Zhong Kuangnan, Huang Kaiyun, Liu Zhichao, Wang Fazhou et al. (2025-10)
    Dual Strategies for Enhancing Carbonation Curing in 3D Printing Steel Slag Mortars:
    Material Modification and Curing Process Innovation
  42. Han Seongho, Addai-NImoh Alfred, Gu Yucun, Khayat Kamal (2025-10)
    Enhanced Shape Stability of Flowable Mortar Through CO2 Injection for 3D Concrete Printing Application
  43. Akter Usmi, Rezvi Syed, Ratul Md., Kishor Saad (2025-09)
    Optimization of Data-Driven Ensemble Models Using Firefly Algorithm for Enhanced 3D Printed Concrete Strength Prediction
  44. Chan Li-Jing, Padil Khairul, Chin Chee-Long, Ibrahim Izni et al. (2025-09)
    Strategies to Enhance Interlayer Bonding in 3D Printed Concrete:
    A Review
  45. Li Leo, Fei Zuojie, Jiao Chujie, Luo Tao et al. (2025-09)
    Bauxite Residue-Based 3D Printing Mortar:
    Enhancing Performance and Sustainability Through the Paste Replacement Approach
  46. Zhang Jiawei, Sun Yuanfeng, Bu Dechao, Lu Cong et al. (2025-08)
    Rheology-Tailored 3DP-UHPC:
    From Enhanced Printability to Impact Performance
  47. Murtaza Ghulam, Baldinelli Giorgio (2025-08)
    Revolutionizing Architecture:
    3D Printing in Large Construction Industry and Strategic Innovations for Enhanced Performance
  48. Li Shiping, Sun Yan, Qian Ye, Chen Wujun et al. (2025-08)
    Bio-Inspired Bouligand Architectures for Enhanced Flexural Performance in 3D-Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
  49. Kumar Rohan, Das Nabodyuti, Nanthagopalan Prakash (2025-08)
    Novel Interlocking Nozzle Geometry for Enhanced Interlayer Strengthening in 3D Concrete Printing
  50. Si Wen, Khan Mehran, McNally Ciaran (2025-08)
    Effect of Nano Silica with High Replacement of GGBS on Enhancing Mechanical Properties and Rheology of 3D Printed Concrete
  51. Xiahou Xiaer, Ding Xingyuan, Yu Ke-Ke, Lu Cong (2025-08)
    From Waste to Strength:
    Sustainable Valorization of Modified Recycled PET Fibers for Rheological Control and Performance Enhancement in 3D Printed Concrete
  52. Singh Amardeep, Anand Kamal, Liu Qiong, Tam Vivian et al. (2025-07)
    Enhancing Interlayer Bonding in 3D Printed Concrete Using Bacteria-Based Biomineralization
  53. Panchal Priyanka, Choi Myoungsung (2025-07)
    A Review on Effect of Natural Fibers to Mitigate CO2 Footprint and Enhance Engineering Properties of 3D Printing Concrete
  54. Jin Yuan, Jiang Chengzhi, Gan Xingyu, Sun Zhaoyang et al. (2025-07)
    Enhancing the Printability of 3D Printed White Cementitious Materials with Accelerators:
    Evolution of Early-Age Hydration and Rheology
  55. Falliano Devid, Restuccia Luciana, Tulliani Jean-Marc, Ferro Giuseppe (2025-07)
    Biochar to Enhance Curing and Rheology of Mortars without Formwork
  56. Guan Jingyuan, Wang Li, Bai Gang, Ma Guowei (2025-06)
    Enhancing 3D Printed Formwork Columns via FRP Hoop Shear Connection Reinforcement
  57. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John et al. (2025-06)
    Enhancing the Mix Design in 3D Concrete Printing Through Systematic Optimization Process
  58. Versteege Jelle, Wolfs Robert, Salet Theo (2025-06)
    Data-Driven Additive Manufacturing with Concrete - Enhancing In-Line Sensory Data with Domain Knowledge:
    Part II: Moisture and Heat
  59. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John (2025-06)
    Enhancing 3D Printed Concrete Through Waste Fly Ash:
    A Comprehensive Approach to Sustainable and Efficient Mix Design
  60. Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-06)
    Enhancing Interfacial Bonding and Pore Structure Optimization in 3D-Printed High-Strength ECC with Steel-PE Hybrid Fibers
  61. Senf Ferdinand, Javed Rezan, Funke Henrik, Gelbrich Sandra (2025-06)
    Enhanced Environmental Sustainability of 3D-Printed Concrete Mixtures Based on Calcium Sulfoaluminate (CSA) and Blast Furnace Cement (CEM III/B)
  62. Alizamir Meysam, Kim Sungwon, Ikram Rana, Ahmed Kaywan et al. (2025-06)
    A Reliable Hybrid Extreme Learning Machine-Metaheuristic Framework for Enhanced Strength Prediction of 3D-Printed Fiber-Reinforced Concrete
  63. Surehali Sahil, Venkatachalam Akshay, Divigalpitiya Ranjith, Kumar Aditya et al. (2025-06)
    Ultra-Low Dosages of Novel Graphene Types Enhance the Rheological Properties and Buildability of 3D Printed Binders
  64. Pereira Carolina, Vieira Henrique, Gonçalves Nuno, Ascensão Guilherme et al. (2025-05)
    Innovative Waste-Containing 3D-Printed Geopolymer Structures for Enhanced Acoustic Comfort in Built Environments
  65. Wang Junsong, Ye Haoran, Sun Yating, Zhang Zixin et al. (2025-05)
    Integration of 3D Printed Fiber Concrete and OpenSeesTO for Enhanced Structural Design
  66. Munemo Rue, Kruger Jacques, Zijl Gideon (2025-05)
    Surface Treatment of 3DPC Interlayers with Silicate-Based Solution for Enhanced Interfacial Bonding
  67. Yu Kun-Hao, Teng Teng, Nah So, Chai Hua et al. (2025-05)
    3D Concrete Printing of Triply Periodic Minimum Surfaces for Enhanced Carbon Capture and Storage
  68. Lucen Hao, Hanxiong Lyu, Huanghua Zhang, Shipeng Zhang et al. (2025-05)
    Development of CO2-Activated Interface Enhancer to Improve the Interlayer Properties of 3D-Printed Concrete
  69. Thajeel Marwah, Kopecskó Katalin, Balázs György (2025-04)
    Enhancing Printability of 3D Printed Concrete by Using Metakaolin and Silica Fume
  70. Gao Jianhao, Niu Yujun, Wang Chaofeng (2025-04)
    Linear Helical Printing:
    A Novel Approach to 3D Printing Concrete Structures with Enhanced Integrity
  71. Wang Chaofan, Li Bin, Chen Bing (2025-04)
    Enhancing Printability and Mechanical Performance of 3D Printed Magnesium Phosphate Cement Through Silica Fume Modification:
    Rheological, Microstructural, and Numerical Insights
  72. Teng Fei, Ye Junhong, Yu Jie, Weng Yiwei (2025-04)
    Multi-Material Printing to Simultaneously Enhance Interlayer and Flexural Performance in 3D Concrete Printing
  73. Noaimat Yazeed, Chougan Mehdi, Seidy Eslam, Albar Abdulrahman et al. (2025-04)
    Optimizing Limestone Calcined Clay Cement for Enhanced 3D Printing Performance of Low-Carbon Materials
  74. Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi (2025-04)
    Novel Strategy for Enhancing Rheological Properties and Interlayer Bonding in Underwater 3D Concrete Printing
  75. Kurniati Eka, Kim Heejeong (2025-04)
    Enhancing the Printability of 3D Printing Limestone Calcined Clay Cement Using Hydroxyethyl Cellulose Admixture and Silica Fume
  76. Liu Han, Laflamme Simon, Cardinali Amelia, Lyu Ping et al. (2025-03)
    Enhancing 3D-Printed Cementitious Composites with Recycled Carbon Fibers from Wind Turbine Blades
  77. Versteege Jelle, Wolfs Robert, Salet Theo (2025-02)
    Data-Driven Additive Manufacturing with Concrete - Enhancing In-Line Sensory Data with Domain Knowledge:
    Part I: Geometry
  78. Olivo Nik, Piccioni Valeria, Milano Francesco, Gramazio Fabio et al. (2025-02)
    Thermal Enhancement of Hollow-Core 3DP Through Nozzle Design Customization
  79. Tarek Shaimaa, Mansour Yasser, Abdelmohsen Sherif, Kohail Mohamed et al. (2025-02)
    Evaluating the Role of Additive Manufacturing in Adobe Brick Enhancement:
    A Comparative Study
  80. Du Guoqiang, Qian Ye (2025-01)
    Enhancing the Fracture and Flexural Behavior of 3D Printed Strain-Hardening Cementitious Composites with Nature-Inspired Single and Double Bouligand Structures
  81. Li Leo, Zhang Guang-Hu, Kwan Albert (2025-01)
    Exploring Submarine 3D Printing:
    Enhancing Washout-Resistance and Strength of 3D Printable Mortar
  82. Sahoo Pitabash, Gupta Souradeep (2024-11)
    3D Printing with Geopolymer-Stabilized Excavated Earth:
    Enhancement of Printability and Engineering-Performance Through Controlled Retardation
  83. Ali Mohd, Rub Rashid, Banat Fawzi, Kim Tae-Yeon (2024-11)
    Enhancing the Printing Quality and Mechanical Properties of 3D Printed Cement Composites with Date-Syrup-Based Graphene-Coated-Sand Hybrid
  84. Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Yang Min et al. (2024-11)
    Enhancing Mechanical Properties of 3D Printed Cementitious Composites Utilizing Hybrid Recycled PP and PET-Fibers
  85. Yasin Mazhar, Siddiqi Zahid, Ur Rehman Atteq, Noshin Sadaf et al. (2024-11)
    Innovative Early-Age Mechanical Properties of 3D Printable Mortar Enhanced with SBR-Latex and Kaolin
  86. Li Jiannan, Singh Amardeep, Zhao Yasong, Sun Jingting et al. (2024-11)
    Enhancing Thermo-Mechanical and Moisture Properties of 3D Printed Concrete Through Recycled Ultra-Fine Waste-Glass-Powder
  87. Liu Chao, Zhang Yukun, Liu Huawei, Wu Yiwen et al. (2024-10)
    Inter-Layer Reinforced 3D Printed Concrete with Recycled Coarse Aggregate:
    Shear Properties and Enhancement Methods
  88. Yu Ke-Ke, Zhao Tai-Qi, Lou Qi-Ling, Ping Yang (2024-10)
    Recycled PET Fibers with Dopamine Surface Modification for Enhanced Inter-Layer Adhesion in 3D Printed Concrete
  89. Du Guoqiang, Sun Yan, Qian Ye (2024-10)
    Nature-Inspired Approach for Enhancing the Fracture Performance of 3D Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
  90. Varela Hugo, Barluenga Gonzalo, Sonebi Mohammed (2024-09)
    Evaluation of Basalt-Fibers and Nano-Clays to Enhance Extrudability and Buildability of 3D Printing Mortars
  91. Vele Jiří, Melter Oto, Hvizdal Ales, Achten Henri et al. (2024-09)
    Enhancing 3D Concrete Printing Buildability with Non-Planar Layering:
    A Case Study
  92. Baytak Tugba, Gdeh Tawfeeq, Jiang Zhangfan, Arce Gabriel et al. (2024-09)
    Rheological, Mechanical, and Environmental Performance of Printable Graphene-Enhanced Cementitious Composites with Limestone and Calcined Clay
  93. Nikravan Ata, Aydin Tolga, Özyurt Nilüfer, Bundur Zeynep (2024-09)
    Enhancing the Performance of 3D Printed Fiber-Reinforced Mortar:
    Synergistic Effects of Clays and Bacterial Cells as Viscosity-Modifying-Agents
  94. Ma Xin-Rui, Wang Xian-Lin, Chen Shi-Zi (2024-09)
    Trustworthy Machine Learning-Enhanced 3D Concrete Printing:
    Predicting Bond Strength and Designing Reinforcement Embedment Length
  95. Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-09)
    Enhancing Inter-Layer Bond Strength and Flexural Performance in 3D Concrete Printing with SHCC Bonding Agents
  96. Aouichat Belkis, Hosseinpoor Masoud, Yahia Ammar, Dupuis Mario (2024-09)
    How Can Nanocellulose Contribute to Enhance the Performance of Concrete 3D Printing?
  97. Lacambra-Andreu Xavier, Scheel Mario, Poulesquen Arnaud (2024-09)
    Enhancing 3D Printability of Metakaolin-Based Geopolymers for Nuclear Waste Filtration Applications
  98. Lei Siduo, Kolawole John, Dobrzanski James, Xu Jie et al. (2024-09)
    Enhancing Surface Quality in Additive Manufacturing Applications:
    A Micro-Power Float Approach
  99. Khokher Shawn, Sanguinetti Paola, Reilly Matthew (2024-09)
    Challenges in Enhancing Workability and Printability for 3D Printable Geopolymer Mortar
  100. Jacquet Yohan, Perrot Arnaud (2024-09)
    Hygroscopic Insulation of Open Matrix Core Wall System as a Strategy to Enhance Buildability of 3D Printed Earth-Based Materials Structures
  101. Farra Ramzi, Dhers Sébastien, Silva Wilson (2024-09)
    Enhancing Early Strength in LC3 3DCP with Advanced Chemical Admixtures
  102. Gebhard Lukas, Mata-Falcón Jaime, Ammann Rebecca, Pressmair Nadine et al. (2024-08)
    Enhancing Structural Efficiency with Digital Concrete:
    Principles, Opportunities and Case Studies
  103. Yu Qian, Zuo Qinxin, Zhang Yamei, Pan Jinlong (2024-08)
    An Investigation on Enhancing the Bonding Properties of 3D Printed Concrete Permanent Formwork and Post-Casted Concrete
  104. Jia Lutao, Niu Geng, Dong Enlai, Jiang Yifan et al. (2024-08)
    Optimization-Strategy for Incorporating Recycled Brick-Powder in 3D Printed Concrete by Balancing Low-Carbon Footprint and Enhanced Performance
  105. Yuan Shuaihua, Duan Dengke, Sun Junbo, Yu Yi et al. (2024-08)
    Mechanical, Alkali Excitation, Hydrothermal Enhancement of 3D Printed Concrete Incorporated with Antimony-Tailings
  106. Pemas Sotirios, Sougioultzi Konstantina, Kouroutzidou Chrysoula, Stefanidou Maria et al. (2024-07)
    Enhancing Clay-Based 3D Printed Mortars with Polymeric Mesh Reinforcement Techniques
  107. Rubeis Tullio, Ciccozzi Annamaria, Giusti Letizia, Ambrosini Dario (2024-07)
    On the Use of 3D Printing to Enhance the Thermal Performance of Building Envelope:
    A Review
  108. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Mechtcherine Viktor, Sanjayan Jay (2024-07)
    Two-Part Print-Head Mixing of Hybrid Alkali-Activated Cement for Buildability Enhancement in 3D Concrete Printing
  109. Shao Lijing, Liu Zhaolong, Liu Qi, Wang Haochuan et al. (2024-07)
    A New Strategy to Enhance 3D Printability of Cement-Based Materials:
    In-Situ Polymerization
  110. Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-07)
    Development of Strain-Hardening Cementitious Composites (SHCC) As Bonding Materials to Enhance Inter-Layer and Flexural Performance of 3D Printed Concrete
  111. Yang Chao, Xu Xinglong, Lei Zuxiang, Sun Junbo et al. (2024-06)
    Enhancing Mechanical Properties of Three-Dimensional Concrete at Elevated Temperatures Through Recycled Ceramic-Powder Treatment Methods
  112. Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Sanjayan Jay (2024-06)
    Encapsulation of Sodium-Silicate to Attain on Demand Buildability Enhancement in Concrete 3D Printing
  113. Du Jiashuai, Wei Yazhi, Zhang Hui, Idriss Aboubaker (2024-06)
    Effects of Oyster-Shell-Derivatives on Performance Enhancement of Biomass-Based 3D Printed Concrete
  114. Yan Yufei, Zhang Mo, Ma Guowei, Sanjayan Jay (2024-05)
    Enhancing Inter-Layer Bonding Strength of 3D Printed Ternary Geopolymer Using Calcium-Carbonate-Whiskers Spray
  115. Mathew Ashitta, Philip Nivin, Jędrzejewska Agnieszka (2024-05)
    Enhancing Sustainability and Performance of 3D Printing Mortar with Alccofine 1203, GGBS, and Kaolin:
    Experimental Investigation and Mechanical Characterization
  116. Kamakshi Tippabhotla, Subramaniam Kolluru (2024-05)
    Rheology-Control and 3D Concrete Printing with Fly Ash-Based Aqueous Nano-Silica Enhanced Alkali-Activated Binders
  117. Qiu Minghong, Qian Ye, Dai Jian-Guo (2024-05)
    Enhancing the Flexural Performance of Concrete Beams with 3D Printed UHP-SHCC Permanent Formwork via Graded Fiber Volume Fraction
  118. Ralston Nadia, Gupta Shashank, Moini Mohamadreza (2024-05)
    3D Printing of Architected Calcium-Silicate Binders with Enhanced and In-Situ Carbonation
  119. Wu Yiwen, Liu Chao, Bai Guoliang, Liu Huawei et al. (2024-05)
    Effect of Time Interval on the Inter-Layer Adhesion of 3D Printed Concrete with Recycled Sand:
    Multi-Factor Influencing Mechanisms and Superabsorbent Polymer Enhancement
  120. Vargas José, Sjölander Andreas, Westerlind Helena, Silfwerbrand Johan (2024-05)
    Internal Topology-Optimization of 3D Printed Concrete Structures:
    A Method for Enhanced Performance and Material-Efficiency
  121. Wang Xiangyu, Krishnan Padmaja, Celik Kemal (2024-04)
    Enhancing Carbonation and Thermal Insulation of Reactive Magnesium Oxide Cement (RMC)-Based 3D Printable Pastes with Cenospheres
  122. Tripathi Avinaya, Nair Sooraj, Chauhan Harshitsinh, Neithalath Narayanan (2024-04)
    Print Geometry Alterations and Layer-Staggering to Enhance Mechanical Properties of Plain and Fiber-Reinforced Three-Dimensional-Printed Concrete
  123. Hall Alice, Herbert Roger, Stafford Richard, Jones G. et al. (2024-03)
    3D Printed Habitat Enhancement Units:
    Key Features to Incorporate within Multifunctional Infrastructure
  124. Jiang Xiongzhi, Li Yujia, Yang Zhe, Li Yangbo et al. (2024-02)
    Harnessing Path-Optimization to Enhance the Strength of Three-Dimensional Printed Concrete
  125. Zavaleta Diana, Ñañez Robert, Silva Guido, Ruiz Gaby et al. (2023-11)
    Additive Construction Using Enhanced Earthen-Based Composites:
    Improvement of the Mechanical Strength and Water Durability Using Chitosan and Agave-Fibers
  126. Breseghello Luca, Talaei Ardeshir, Florenzano Daniele, Naboni Roberto (2023-09)
    Shape-Env:
    Camera-Enhanced Robotic Terrain-Shaping for Complex 3D Concrete Printing
  127. Mohsen Mohamed, Diseet Malak, Aburumman Mervat, Taha Ramzi et al. (2023-09)
    3D Printed Clay Enhanced with Graphene-Nano-Platelets for Sustainable and Green Construction
  128. Rahemipoor Sahand, Hasany Masoud, Mehrali Mohammad, Almdal Kristoffer et al. (2023-07)
    Phase-Change-Materials Incorporation into 3D Printed Geopolymer Cement:
    A Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings
  129. Yang Hui-Qin, Klug Christina, Schmitz Thomas (2023-06)
    Fiber-Reinforced Clay:
    An Exploratory Study on Automated Thread Insertion for Enhanced Structural Integrity in LDM.
  130. Liu Junli, Tran Jonathan, Ginigaddara Thusitha, Mendis Priyan (2023-06)
    Exploration of Using Graphene Oxide for Strength Enhancement of 3D Printed Cementitious Mortar
  131. Codarin Sara (2023-05)
    Enhancing the Workforce in Construction:
    Robotic Concrete Printing in Detroit
  132. Tao Yaxin, Rahul Attupurathu, Mohan Manu, Schutter Geert et al. (2023-05)
    Enhancing Mechanical Performance of Twin-Pipe Printable Concrete Using a Binary Binder System
  133. Yang Liming, Sepasgozar Samad, Shirowzhan Sara, Kashani Alireza et al. (2022-12)
    Nozzle Criteria for Enhancing Extrudability, Buildability and Inter-Layer Bonding in 3D Printing Concrete
  134. Zhou Yiyi, Jiang Dan, Sharma Rahul, Xie Yi et al. (2022-11)
    Enhancement of 3D Printed Cementitious Composite by Short Fibers:
    A Review
  135. Liu Miao, Wang Li, Ma Guowei, Li Weiwei et al. (2022-11)
    U-Type Steel-Wire-Mesh for the Flexural Performance Enhancement of 3D Printed Concrete:
    A Novel Reinforcing Approach
  136. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Sanjayan Jay (2022-07)
    Enhancing the Properties of Foam-Concrete 3D Printing Using Porous Aggregates
  137. Cao Xiangpeng, Yu Shiheng, Zheng Dapeng, Cui Hongzhi (2022-06)
    Nail-Planting to Enhance the Interface Bonding Strength in 3D Printed Concrete
  138. Douba Ala, Badjatya Palash, Kawashima Shiho (2022-03)
    Enhancing Carbonation and Strength of MgO Cement Through 3D Printing
  139. Ayegba Blessing, Egbe King-James, Nazar Ali, Huang Mingzhi et al. (2022-01)
    Resource Efficiency and Thermal Comfort of 3D Printable Concrete Building Envelopes Optimized by Performance Enhancing Insulation:
    A Numerical Study
  140. Cui Jinyang, He Zhen, Zhang Guozhi, Cai Xinhua (2022-01)
    Rheological Properties of Sprayable Ultra-High-Performance Concrete with Different Viscosity-Enhancing Agents
  141. Breseghello Luca, Naboni Roberto (2021-07)
    Adaptive Tool-Path:
    Enhanced Design and Process-Control for Robotic 3DCP
  142. Sun Junbo, Huang Yimiao, Aslani Farhad, Wang Xiangyu et al. (2021-05)
    Mechanical Enhancement for EMW-Absorbing Cementitious Material Using 3D Concrete Printing
  143. Dielemans Gido, Briels David, Jaugstetter Fabian, Henke Klaudius et al. (2021-04)
    Additive Manufacturing of Thermally Enhanced Lightweight Concrete Wall Elements with Closed Cellular Structures
  144. Weng Yiwei, Li Mingyang, Wong Teck, Tan Ming (2021-01)
    Synchronized Concrete and Bonding-Agent-Deposition-System for Inter-Layer Bond Strength Enhancement in 3D Concrete Printing
  145. Lao Wenxin, Li Mingyang, Tjahjowidodo Tegoeh (2020-09)
    Variable-Geometry Nozzle for Surface Quality Enhancement in 3D Concrete Printing
  146. Li Zhijian, Wang Li, Ma Guowei, Sanjayan Jay et al. (2020-07)
    Strength and Ductility Enhancement of 3D Printing Structure Reinforced by Embedding Continuous Micro-Cables
  147. Bhattacherjee Shantanu, Santhanam Manu (2020-07)
    Enhancing Buildability of 3D Printable Concrete by Spraying of Accelerating-Admixture on Surface
  148. Ma Guowei, Salman Nazar, Wang Li, Wang Fang (2020-02)
    A Novel Additive Mortar Leveraging Internal Curing for Enhancing Inter-Layer Bonding of Cementitious Composite for 3D Printing
  149. Celorrio-Barragué Luis, Calvo-Simón Sergio, Gaspar Marcelo, Vidal-Cortés Mariano et al. (2019-10)
    3D Printed Models-Based Lab Activities to Enhance Learning-Teaching Processes in Structural Engineering Courses
  150. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-09)
    Enhancing Strength of Powder-Based 3D Printed Geopolymers for Digital Construction Applications
  151. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-09)
    Post-Processing Techniques to Enhance Strength of Portland Cement Mortar Digitally Fabricated Using Powder-Based 3D Printing Process
  152. Hosseini Ehsan, Zakertabrizi Mohammad, Korayem Asghar, Xu Guanzhong (2019-03)
    A Novel Method to Enhance the Inter-Layer Bonding of 3D Printing Concrete:
    An Experimental and Computational Investigation
  153. Marchment Taylor, Sanjayan Jay, Xia Ming (2019-03)
    Method of Enhancing Inter-Layer Bond Strength in Construction-Scale 3D Printing with Mortar by Effective Bond Area Amplification
  154. Li Zhijian, Wang Li, Ma Guowei (2019-02)
    Method for the Enhancement of Buildability and Bending-Resistance of Three-Dimensional-Printable Tailing Mortar
  155. Marchment Taylor, Sanjayan Jay (2018-09)
    Method of Enhancing Inter-Layer Bond Strength in 3D Concrete Printing
  156. Vandenberg Aileen, Bessaies-Bey Hela, Wille Kay, Roussel Nicolas (2018-09)
    Enhancing Printable Concrete Thixotropy by High-Shear Mixing
  157. Qian Ye, Schutter Geert (2018-06)
    Enhancing Thixotropy of Fresh Cement-Pastes with Nano-Clay in Presence of Polycarboxylate-Ether Superplasticizer (PCE)
  158. Li Zhijian, Wang Li, Ma Guowei (2018-05)
    Method for the Enhancement of Buildability and Bending-Resistance of 3D Printable Tailing Mortar
  159. Nam Young, Hwang Young, Park Ji, Lim Yun (2018-02)
    Feasibility Study to Control Fiber-Distribution for Enhancement of Composite Properties via Three-Dimensional Printing