Skip to content

#anisotropy

Keywords by Co - Occurrence

  1. Chen Zhengyuan, Yang Shutong, Lan Tian, Yang Tiange (2026-04)
    Evaluation of Interfacial Fracture Resistance and Fracture Anisotropy in 3D-Printed Ultra-High-Performance Concrete:
    Analytical Modelling and Experimental Investigation
  2. Jamhiri Babak, Buswell Richard, Blanco Ana (2026-04)
    How Homogenous Is Your 3D Printed Concrete?:
    A New Approach to Assessing Anisotropy Using Weibull Statistics
  3. Wang Guosheng, Zhang Ziyi, Tao Junwei, Tian Gang et al. (2026-04)
    Anisotropic Fracture Behavior of PAN Fiber Reinforced 3D Printed Concrete:
    Crack Evolution and Fiber Orientation Toughening Mechanism
  4. Saelens Lien, Wan-Wendner Roman, Caspeele Robby, Tittelboom Kim (2026-03)
    Anisotropy of 3D Printed Concrete Strength and Elasticity for a Well-Developed One-Component and Two-Component Concrete Mixture
  5. Jia Ru, Huang Xin, Yang Haoran, Yao Weijing et al. (2026-03)
    Based on X-CT and DEM Simulation:
    A Study on Performance Anisotropy and Mechanisms of 3D Printed Concrete
  6. Lunsford Caleb, Spencer Lawson, Shen Dongye, Genedy Moneeb et al. (2026-03)
    Effect of Toolpath Strategies on Anisotropy and Structural Performance of 3D Printed Concrete Gyroid Walls
  7. Cheng Hanbin, Duarte José, Memari Ali, Bilén Sven et al. (2026-02)
    Recycled Cork Aggregate for 3D Concrete Printing:
    Rheology, Pore-Driven Anisotropy Mitigation, and Low-Carbon Thermal Buffering
  8. Yu Chaomin, Si Qi, Pan Zhihong, Ding Faxing (2026-02)
    Study on the Anisotropic Mechanical and Durability Properties of 3D-Printed Recycled PVC Concrete
  9. Mo Jinxu, Lu Han, Ren Fengming, Lai Mianheng et al. (2026-02)
    Impact of Waste Rubber Powder Size and Replacement Ratio on the Compressive Strength Anisotropy and Pore Structure of 3D Printed Concrete
  10. Mim Nusrat, Hosan Anwar, Shaikh Faiz, Sarker Prabir (2026-01)
    Mechanical Anisotropy and Microstructural Investigation of Copper Heap Leach Residue Incorporated 3D Printed Concrete
  11. Chen Guixiang, Zhang Xuanzheng, Wang Jun, Hu Kui et al. (2026-01)
    Anisotropy and Mechanical Enhancement of 3D-Printed Vitrified Microsphere Thermal Insulation Mortar Incorporating Basalt Fiber Under Different Printing Paths
  12. Zhu Binrong, Qi Miao, Chen Wei, Pan Jinlong (2025-12)
    Anisotropic Mechanical Properties of 3D Printed Low-Carbon Concrete and Connection Strategies for Large-Scale Reusable Formwork in Digital Construction
  13. Li Liqing, Shi Zhenkun, Wang Lei, Sui Yi et al. (2025-12)
    3D Printing of Simulated Lunar Soil Geopolymer and Analysis of Its Weak Surface and Anisotropic Performance
  14. Iqbal Imtiaz, Kasim Tala, Besklubova Svetlana, Mustafa Ali et al. (2025-12)
    Passive Determination of Anisotropic Compressive Strength of 3D Printed Concrete Using Multiple Neural Networks Enhanced with Explainable Machine Learning (XML)
  15. Xu Shuhao, Lin Xing-Tao, Chen Xiangsheng (2025-11)
    Numerical Investigation of Anisotropic in 3D Printed Concrete Specimens Considering the Effects of Weak Interfaces and Pore-Induced Defects
  16. Zhu Xiaowei, Zhang Xudong, Zhang Jicheng, Chen Miao et al. (2025-11)
    Study on Anisotropic Thermal and Mechanical Properties of 3D-Printed Scrap-Aerogel-Incorporated Concrete
  17. Zhang Hui, Wu Jie, Huang Bo-Tao, Yu Rena et al. (2025-11)
    Cross-Scale Mechanisms of Anisotropy in 3D-Printed Ultra-High-Performance Concrete
  18. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun et al. (2025-11)
    Examining the Multi-Scale Toughening Mechanisms and Mechanical Anisotropic Behavior of 3D Printed Concrete Reinforced with Calcium Sulfate Whiskers and Mixed Fibers
  19. Crook Thomas, Li Matthew, Buswell Richard, Allinson David (2025-10)
    Anisotropic Hygrothermal Properties of 3D Printed Concrete
  20. Zhou Juanlan, Shi Xiangwen, Zheng Hongrun, Jin Ruoyu et al. (2025-09)
    Investigating the Effects of Hybrid PVA/BF Fibers in Low-Carbon 3D Printed Concrete with Recycled Aggregates:
    Rheology, Strength, and Anisotropy
  21. Xing Wenjing, Li Zhengrong (2025-09)
    Quantifying the Heterogeneous Anisotropic Thermal Performance of Extrusion-Based 3D Printed Structures:
    A Multiscale Computational Approach
  22. Li Fuhai, Xiao Sai, Yang Bo, Li Kepu et al. (2025-09)
    Mechanical Properties and Anisotropy of 3D-Printed Concrete Modified with Multiscale Materials Based on Optimized Printing Process Design
  23. Maroszek Marcin, Hager Izabela, Mróz Katarzyna, Sitarz Mateusz et al. (2025-08)
    Anisotropy of Mechanical Properties of 3D-Printed Materials:
    Influence of Application Time of Subsequent Layers
  24. Siqueira Neto Luiz, Isgor Burkan, Weiss William (2025-08)
    Modeling Fluid Absorption in Layered Anisotropic Cement-Based Materials
  25. Yerikania Utami, Du Hongjian, Poh Leong (2025-07)
    A Comprehensive Experimental Investigation of Anisotropy Behavior on Highly Carbon-Minimized 3D Printed Concrete
  26. Bayrak Alper, Shaban Nefize, Sarıtaş Afsin, Meral Akgul Cagla (2025-07)
    A Semi-Empirical Framework for Modeling Anisotropy, Spatial Variation and Failure Mechanisms in 3D Printed Concrete
  27. Dong Liang, Wu Chengqing, Liu Zhongxian, Wu Pengtao et al. (2025-07)
    Chloride Transport Anisotropy and Interfacial Degradation in 3D-Printed Ultra-High-Performance Concrete:
    Multi-Scale Evaluation and Engineering Implications
  28. Mostert Jean-Pierre, Kruger Jacques (2025-07)
    Reducing Anisotropic Behaviour of 3D Printed Concrete Through Interlocked Filaments
  29. Ye Huzi, He Qianpeng, Ping Pengxin, Pan Jinlong et al. (2025-06)
    Anisotropic Flexural Behavior and Energy Absorption of 3D Printed Engineered Cementitious Composites (3DP-ECC) Beams Under Low-Velocity Impact
  30. Yao Jiaxu, Luo Jie, Qiu Minghong, Nagai Kohei (2025-06)
    Mesoscale Modeling of Anisotropic Compressive Behavior and Pull-Out Performance of 3D Printed Concrete with Steel Bars Using 3D RBSM
  31. Pham Thi, Nguyen Thi, Huang Jie (2025-06)
    Experimental Study on Anisotropic Mechanical Properties of 3D Reinforced Concrete with Discrete Polyethylene Fibers
  32. Chen Meng, Sun Hao, Wang Yuting, Zhang Tong (2025-05)
    Relationship Between Interfacial Pore Structure and Anisotropic Dynamic Splitting Behaviour of 3D Printed Engineered Cementitious Composites
  33. Song Xinlei, Xu Quanbiao, Wang Hailong, Sun Xiaoyan et al. (2025-05)
    Flowability-Dependent Anisotropic Mechanical Properties of 3D Printing Concrete:
    Experimental and Theoretical Study
  34. An Ning, Wang Huai, Wang Peijun, Xu Chuanhua et al. (2025-04)
    Tension-Compression Anisotropic Cohesion Model for the Interlayer Interface of 3D-Printed Concrete Compression Specimens
  35. Zhu Jinggao, Cervera Miguel, Ren Xiaodan (2025-04)
    Peridynamic Anisotropic Behavior Analysis of 3D-Printed Concrete Structures
  36. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wong Teck et al. (2025-03)
    Investigate Mechanisms of Different Printing Parameters on the Mechanical Anisotropy of 3D Concrete Printing Elements by Using Computed Tomography Scan and Computational Fluid Dynamics Methods
  37. Zhou Wen, Xu Yading, Meng Zhaozheng, Xie Jinbao et al. (2025-03)
    Filament Stitching:
    An Architected Printing Strategy to Mitigate Anisotropy in 3D-Printed Engineered Cementitious Composites
  38. Yuan Hanquan, Dong Enlai, Jia Zijian, Jia Lutao et al. (2025-03)
    The Influence of Pore Structure and Fiber Orientation on Anisotropic Mechanical Property of 3D Printed Ultra-High-Performance Concrete
  39. Chen Meng, Cheng Jianhua, Zhang Tong, Wang Yuting (2025-03)
    Experimental Characterization and Constitutive Modelling of the Anisotropic Dynamic Compressive Behavior of 3D Printed Engineered Cementitious Composites
  40. Kolawole John, Buswell Richard, Mahmood Sultan, Isa Muhammed et al. (2025-02)
    On the Origins of Anisotropy of Extrusion-Based 3D Printed Concrete:
    The Roles of Filament Skin and Agglomeration
  41. Shen Qiang, Sun Dongpu, Lu Chenyu, Zhang Zhigang et al. (2025-02)
    Fresh and Anisotropic-Mechanical Properties of Polyoxymethylene Fibers Reinforced 3D Printable Cementitious Composites
  42. Li Yeou-Fong, Liang Yu-Fang, Syu Jin-Yuan, Huang Chi-Hong et al. (2024-12)
    Static and Dynamic Mechanical Characteristics of 3D Printed Anisotropic Basalt Fiber-Reinforced Cement Mortar
  43. Aminpour Nima, Memari Ali (2024-12)
    Analysis of Anisotropic Behavior in 3D Concrete Printing for Mechanical Property Evaluation
  44. Du Longyu, Zhou Jiehang, Lai Jianzhong, Yin Xuexiang et al. (2024-12)
    Dynamic Damage Behavior and Anisotropic Mechanism of 3D Printed Reinforced Concrete Subjected to Penetration
  45. Li Fangyuan, Hu Xiangcheng, Shahzad Qamar (2024-12)
    Anisotropic Behavior in 3D Printed Concrete:
    Finite Element Simulation Approach
  46. Ge Yali, Yao Jie (2024-11)
    Influence of FA and HPMC on the Fresh Properties and Anisotropy of 3D Printing Engineered Cementitious Composites
  47. Demont Léo, Bono Victor, Ducoulombier Nicolas, Mesnil Romain et al. (2024-11)
    Anisotropic Concrete:
    A Composite Look on the Engineering and Architecture of Concrete Construction
  48. Reddy Swami, Shariff Najeeb, Nanthagopalan Prakash (2024-11)
    Topology-Optimization of 3D Concrete Printed Columns Considering Material-Anisotropy
  49. Skibicki Szymon, Dvořák Richard, Pazdera Luboš, Topolář Libor et al. (2024-11)
    Anisotropic Mechanical Properties of 3D Printed Mortar Determined by Standard Flexural and Compression-Test and Acoustic Emission
  50. Park Keunhyoung, Memari Ali, Hojati Maryam, Radlińska Aleksandra et al. (2024-10)
    Effects of Anisotropic Mechanical Behavior on Nominal Moment Capability of 3D Printed Concrete Beam with Reinforcement
  51. Sun Junbo, Zhang Yanling, Wu Qi, Wang Yufei et al. (2024-10)
    3D Printed Concrete Incorporating Waste-Rubber:
    Anisotropic Properties and Environmental Impact-Analysis
  52. Muy Yeakleang, Courard Luc, Bulteel David, Rémond Sébastien et al. (2024-09)
    Influence of Nozzle-Diameter on the Anisotropy of Compressive Strength:
    Measured on 3D Printing Concrete Designed with Recycled Fine Aggregates
  53. Kul Anil, Kocaer Öznur, Lucas Sandra (2024-09)
    Anisotropic Characteristics of 3D Printed Geopolymer Mortars from End-of-Life Materials of Construction Industry
  54. Zhou Wen, Xu Yading, Šavija Branko, McGee Wesley et al. (2024-09)
    Stitching Engineered Cementitious Composites (ECC ):
    Unraveling Anisotropy Challenges Through Architectured 3D Printing Path Design
  55. Liu Bing, Chen Yuwen, Li Dongdong, Wang Yang et al. (2024-09)
    Study on the Fracture Behavior and Anisotropy of 3D Printing PVA-Fiber-Reinforced Concrete
  56. Thajeel Marwah, György L. (2024-08)
    Hardened Properties of 3D Printed Concrete Influenced by Anisotropy
  57. Glotz Theresa, Petryna Yuri (2024-08)
    Experimental Characterization of Anisotropic Mechanical Behavior and Failure-Mechanisms of Hardened Printed Concrete
  58. Lyu Xin, Elchalakani Mohamed, Wang Xiangyu, Sun Junbo et al. (2024-07)
    Mechanical Performance and Anisotropic Analysis of Rubberised 3D Printed Concrete Incorporating PP-Fiber
  59. Zhang Kaijian, Lin Wenqiang, Zhang Qingtian, Wang Dehui et al. (2024-07)
    Evaluation of Anisotropy and Statistical Parameters of Compressive Strength for 3D Printed Concrete
  60. Baktheer Abedulgader, Claßen Martin (2024-07)
    A Review of Recent Trends and Challenges in Numerical Modeling of the Anisotropic Behavior of Hardened 3D Printed Concrete
  61. Malik Umair, Riaz Raja, Rehman Saif, Usman Muhammad et al. (2024-07)
    Advancing Mix-Design Prediction in 3D Printed Concrete:
    Predicting Anisotropic Compressive Strength and Slump-Flow
  62. Bai Meiyan, Xiao Jianzhuang, Shen Jianyu, Ding Tao et al. (2024-07)
    Printability and Mechanical Anisotropy of 3D Printed Concrete with Manufactured Sand Derived from Basalt
  63. Shao Yulong, Yang Jingwei, Kim Jineon, Song Jaejoon et al. (2024-05)
    Microscopic Analysis of Mechanical Anisotropy and Damage-Evolution of 3D Printed Rock-Like Samples Under Uniaxial Compressive Tests
  64. Yan Kang-Tai, Li Lingzhi, Ye Junhong, Bazarov Dilshod et al. (2024-05)
    Anisotropic Size-Effect of 3D Printed LC3-Based Engineered Cementitious Composites
  65. Li Zhengrong, Xing Wenjing, Sun Jingting, Feng Xiwen et al. (2024-03)
    Thermal Network Model for Anisotropic Heat Transfer in 3D Printed Complex Geometry Structures
  66. Özalp Fatih (2024-01)
    Mechanical Behavior and Permeability Properties of Sustainable and High-Performance Anisotropic Three-Dimensional Printable Concrete
  67. Caron Jean-François, Ducoulombier Nicolas, Demont Léo, Bono Victor et al. (2023-10)
    3D Printing of Continuous-Fibers Cementitious Composites:
    Anisotropic 3D Mortar
  68. Rui Aoyu, Wang Li, Lin Wenyu, Ma Guowei (2023-10)
    Experimental Study on Damage Anisotropy of 3D Printed Concrete Exposed to Sulfate-Attack
  69. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2023-09)
    Anisotropic Properties of Additively Manufactured Concrete Elements
  70. Li Leo, Xiao Bofeng, Cheng Cong-Mi, Xie Hui-Zhu et al. (2023-09)
    Adding Glass-Fibers to 3D Printable Mortar:
    Effects on Printability and Material-Anisotropy
  71. Özkılıç Hamza, İlcan Hüseyin, Aminipour Ehsan, Tuğluca Merve et al. (2023-08)
    Bond Properties and Anisotropy Performance of 3D Printed Construction and Demolition Waste-Based Geopolymers:
    Effect of Operational- and Material-Oriented Parameters
  72. Zhou Wen, McGee Wesley, Gökçe H., Li Victor (2023-08)
    A Bio-Inspired Solution to Alleviate Anisotropy of 3D Printed Engineered Cementitious Composites (3DP-ECC):
    Knitting/Tilting Filaments
  73. Surehali Sahil, Tripathi Avinaya, Neithalath Narayanan (2023-08)
    Anisotropy in Additively Manufactured Concrete Specimens Under Compressive Loading:
    Quantification of the Effects of Layer-Height and Fiber-Reinforcement
  74. Rahal Said, Kaci Abdelhak, Skoudarli Abdeslam (2023-07)
    Evaluation of Mechanical Anisotropy-Induced by 3D Printing Process for Earth-Based Materials
  75. Wang Chaofan, Chen Bing, Vo Thanh, Rezania Mohammad (2023-07)
    Mechanical Anisotropy, Rheology and Carbon Footprint of 3D Printable Concrete:
    A Review
  76. Jaji Mustapha, Kamoru A., Zijl Gideon, Babafemi Adewumi (2023-07)
    Effect of Anisotropy on Permeability Index and Water-Absorption of 3D Printed Metakaolin-Based Geopolymer Concrete
  77. Sun Bochao, Li Peichen, Wang Dianchao, Ye Jun et al. (2023-03)
    Evaluation of Mechanical Properties and Anisotropy of 3D Printed Concrete at Different Temperatures
  78. Yao Xiaofei, Lyu Xin, Sun Junbo, Wang Bolin et al. (2023-03)
    AI-Based Performance Prediction for 3D Printed Concrete Considering Anisotropy and Steam-Curing Condition
  79. Surehali Sahil, Tripathi Avinaya, Nimbalkar Atharwa, Neithalath Narayanan (2023-01)
    Anisotropic Chloride Transport in 3D Printed Concrete and Its Dependence on Layer-Height and Interface-Types
  80. Lv Chun, Shen Hongtao, Liu Jie, Wu Dan et al. (2022-11)
    Properties of 3D Printing Fiber-Reinforced Geopolymers Based on Inter-Layer Bonding and Anisotropy
  81. Mesnil Romain, Poussard Valentin, Sab Karam, Caron Jean-François (2022-11)
    On the Geometrical Origin of the Anisotropy in Extrusion-Based 3D Printed Structures
  82. Demiral Nazim, Ozkan Ekinci Mehmet, Şahin Oğuzhan, İlcan Hüseyin et al. (2022-10)
    Mechanical Anisotropy Evaluation and Bonding Properties of 3D Printable Construction and Demolition Waste-Based Geopolymer Mortars
  83. Liu Bing, Liu Xiaoyan, Li Guangtao, Geng Songyuan et al. (2022-09)
    Study on Anisotropy of 3D Printing PVA-Fiber-Reinforced Concrete Using Destructive and Non-Destructive Testing Methods
  84. Demont Léo, Charrier Malo, Margerit Pierre, Ducoulombier Nicolas et al. (2022-06)
    Flow-Based Pultrusion of Anisotropic Concrete:
    Mechanical Properties at Hardened State
  85. Jiang Quan, Liu Qiang, Wu Si, Zheng Hong et al. (2022-06)
    Modification Effect of Nano-Silica and Polypropylene-Fiber for Extrusion-Based 3D Printing Concrete:
    Printability and Mechanical Anisotropy
  86. Ma Guowei, A Ruhan, Xie Panpan, Pan Zhu et al. (2022-01)
    3D Printable Aerogel-Incorporated Concrete:
    Anisotropy Influence on Physical, Mechanical, and Thermal Insulation Properties
  87. Chen Yuning, Jia Lutao, Liu Chao, Zhang Zedi et al. (2022-01)
    Mechanical Anisotropy Evolution of 3D Printed Alkali-Activated Materials with Different GGBFS-FA Combinations
  88. Yang Yekai, Wu Chengqing, Liu Zhongxian, Wang Hailiang et al. (2021-10)
    Mechanical Anisotropy of Ultra-High-Performance Fiber-Reinforced Concrete for 3D Printing
  89. Liu Chenkang, Yue Songlin, Zhou Cong, Sun Honglei et al. (2021-08)
    Anisotropic Mechanical Properties of Extrusion-Based 3D Printed Layered Concrete
  90. Jørgensen Henrik, Douglas Philip, Naboni Roberto (2021-06)
    Experimental Study on the Anisotropic Behavior and Strength of 3D Printed Concrete
  91. Ye Junhong, Cui Can, Yu Jiangtao, Yu Kequan et al. (2021-02)
    Effect of Polyethylene-Fiber Content on Workability and Mechanical-Anisotropic Properties of 3D Printed Ultra-High-Ductile Concrete
  92. Ye Junhong, Cui Can, Yu Jiangtao, Yu Kequan et al. (2021-01)
    Fresh and Anisotropic-Mechanical Properties of 3D Printable Ultra-High-Ductile Concrete with Crumb-Rubber
  93. Xiao Jianzhuang, Liu Haoran, Ding Tao (2020-11)
    Finite-Element-Analysis on the Anisotropic Behavior of 3D Printed Concrete under Compression and Flexure
  94. Heras Murica Daniel, Genedy Moneeb, Taha Mahmoud (2020-09)
    Examining the Significance of Infill-Printing-Pattern on the Anisotropy of 3D Printed Concrete
  95. Ding Tao, Xiao Jianzhuang, Zou Shuai, Zhou Xinji (2020-08)
    Anisotropic Behavior in Bending of 3D Printed Concrete Reinforced with Fibers
  96. Ducoulombier Nicolas, Demont Léo, Chateau Camille, Bornert Michel et al. (2020-04)
    Additive Manufacturing of Anisotropic Concrete:
    A Flow-Based Pultrusion of Continuous Fibers in a Cementitious Matrix
  97. Ma Guowei, Li Zhijian, Wang Li, Wang Fang et al. (2019-01)
    Mechanical Anisotropy of Aligned Fiber-Reinforced Composite for Extrusion-Based 3D Printing
  98. Ma Guowei, Zhang Junfei, Wang Li, Li Zhijian et al. (2018-06)
    Mechanical Characterization of 3D Printed Anisotropic Cementitious Material by the Electromechanical Transducer
  99. Panda Biranchi, Paul Suvash, Tan Ming (2017-07)
    Anisotropic Mechanical Performance of 3D Printed Fiber-Reinforced Sustainable Construction-Material