Mechtcherine Viktor¶
Information
- ORCID
- 0000-0002-4685-7064
- First Contribution
- 2013-12-25
- Last Contribution
- 2026-04-07
- Number Contributions
- 154
- Number Citations
- 7334
Top Co-Authors
- Nerella Venkatesh (42)
- Neef Tobias (22)
- Ivaniuk Egor (17)
- Markin Slava (15)
- Müller Steffen (14)
Top Cited Articles
Persons This Author Cites the Most
- Bos Freek (282)
- Salet Theo (268)
- Sanjayan Jay (184)
- Buswell Richard (183)
- Roussel Nicolas (177)
Persons This Author Is Cited Most By
- Zhang Yamei (237)
- Sanjayan Jay (160)
- van Zijl Gideon (138)
- Ma Guowei (134)
- Liu Chao (129)
- Ramakrishnan Sayanthan, Ramesh Akilesh, Pasupathy Kirubajiny, Mechtcherine Viktor et al. (2026-04)
Enhancing the Printability and Sustainability of 3D Concrete Printing Using Recycled Waste Glass as a Cement Substitute - Reißig Silvia, Mechtcherine Viktor (2026-03)
Assessing and Modeling the Buildability of Cement-Based Materials in the Context of Digital Fabrication - Liu Jiaxu, Zhang Nan, Xie Xiangyu, Sanjayan Jay et al. (2026-02)
Orientation and Spatial Distribution of Pores and Fibers in Concrete Elements Produced by Extrusion-Based 3D Printing - Neef Tobias, Butler Marko, Mechtcherine Viktor (2026-02)
Methodology for Integrating Mineral-Impregnated Carbon Fibers as Reinforcement in Fine Filament 3D Concrete Printing - Neef Tobias, Wen Yue, Friese Danny, Cherif Chokri et al. (2026-02)
Digital Fabrication Methods for Carbon Reinforced Shell-Like Concrete Structures - Mechtcherine Viktor, Gleiser Leonie (2026-01)
Back to Earth:
Building the Future with an Ancient Material - Teng Fei, Yang Minxin, Yu Jie, Weng Yiwei et al. (2025-10)
Multi-Material 3D Concrete Printing:
Automated Hybrid Reinforcements Using Textile and Strain-Hardening Cementitious Composites - Bos Freek, Menna Costantino, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
Approach and Main Results:
Mechanical Properties of 3D Printed Concrete - Mechtcherine Viktor, Muthukrishnan Shravan, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
Compressive Strength and Modulus of Elasticity:
Mechanical Properties of 3D Printed Concrete - Robens-Radermacher Annika, Kujath Cezary, Bos Freek, Mechtcherine Viktor et al. (2025-06)
Design and Implementation of a Database System for Querying, Sharing, and Analyzing Experimental Data:
Mechanical Properties of 3D Printed Concrete - Wolfs Robert, Versteege Jelle, Santhanam Manu, Bhattacherjee Shantanu et al. (2025-06)
Flexural and Tensile Strength:
Mechanical Properties of 3D Printed Concrete - Görtzen Tom, Neef Tobias, Scheffler Philipp, Macek Domen et al. (2025-05)
3D Concrete Printing of Topological Interlocking Blocks - Beigh Mirza, Signorini Cesare, Rauf Asim, Schröfl Christof et al. (2025-04)
Intrinsic Rheological Behavior of Limestone Calcined Clay Cementitious (LC3) Binders for Automated Construction:
Effect of Calcium Sulfate Varieties - Zhang Yuying, Zhu Xiaohong, Li Muduo, Zhang Chao et al. (2025-04)
3D Printing Technology in Concrete Construction - Gleiser Leonie, Mechtcherine Viktor (2025-03)
3D-Druck mit Lehm:
Interaktion von Material und Maschine - Ivaniuk Egor, Pukhkaiev Dmytro, Reichle Mathias, Zhao Wanqi et al. (2025-01)
Robotic Assembly of Modular Concrete Shells Using Falsework - Neef Tobias, Kalthoff Matthias, Müller Steffen, Cruz Cynthia et al. (2024-12)
Mineral-Impregnated Carbon-Fibers-Reinforcement for Concrete Elements Manufactured by Extrusion - Wang Lei, Nerella Venkatesh, Li Dianmo, Zhang Yuying et al. (2024-11)
Biochar-Augmented Climate-Positive 3D Printable Concrete - Neef Tobias, Görtzen Tom, Niemeyer Alice, Mechtcherine Viktor (2024-10)
Material-Saving Concrete Ceiling Made from 3D-Printed Interlocking Blocks - Markin Slava, Cordova Julian, Combrinck Riaan, Mechtcherine Viktor (2024-09)
Deformation Behavior of 3D Printed Concrete Elements Induced by Plastic Shrinkage - Kloft Harald, Sawicki Bartłomiej, Bos Freek, Dörrie Robin et al. (2024-09)
Interaction of Reinforcement, Process, and Form in Digital Fabrication with Concrete - Ivaniuk Egor, Tošić Zlata, Lordick Daniel, Mechtcherine Viktor (2024-09)
Flow Production of Variable Curved Modules for Thin-Walled Concrete Shell Structures - Mikhalev Daniil, Fakhrayee Nejad Siamak, Ng Serina, Bose Baishakhi et al. (2024-09)
Practical Insights and Advances in Concrete Pumping - Ivaniuk Egor, Mechtcherine Viktor (2024-09)
A Method for Measuring the Bond Strength Between Impregnated Carbon-Yarn and 3D Printed Strain-Hardening Cementitious Composites - Neef Tobias, Mechtcherine Viktor (2024-09)
Continuous Fiber-Reinforcement for Extrusion-Based 3D Concrete Printing - Reißig Silvia, Herdan Annika, Mechtcherine Viktor (2024-09)
Rheological Behavior of Steel-Fiber-Reinforced Concrete in the Context of Additive Manufacturing - Adams Thomas, Wu Chu, Müller Steffen, Mechtcherine Viktor et al. (2024-09)
As-Built Monitoring of Concrete Structures - Gomzyakov Albert, Taubert Markus, Sokolov Dmitrii, Reuter Uwe et al. (2024-09)
Setup for ML-Based Prediction of Concrete Rheology from 3D Slump-Test-Geometry - Ivaniuk Egor, Reißig Silvia, Mechtcherine Viktor (2024-09)
Automating Penetration Tests for Fresh 3D Printed Cementitious Materials - Kondepudi Kala, Gomzyakov Albert, Liebscher Marco, Mechtcherine Viktor (2024-09)
3D Printing by Selective Activation of Geopolymer-Based Binders - Markin Slava, Mechtcherine Viktor (2024-09)
Mitigating Plastic Shrinkage and Cracking in 3D Printed Concrete Through Surface Rewetting - Mechtcherine Viktor, Taubert Markus, Müller Steffen, Butler Marko et al. (2024-09)
Integration of Steel Reinforcement into Extrusion-Based 3D Concrete Printing of Monolithic Concrete Elements - Muthukrishnan Shravan, Feys Dimitri, Mikhalev Daniil, Baumert Christian et al. (2024-09)
Comparison of Rotational Rheometers for Ready-Mix Concrete - Neef Tobias, Görtzen Tom, Niemeyer Alice, Mechtcherine Viktor (2024-09)
Investigation of Digitally Produced, Interlocking Concrete Blocks for a Modular Slab Construction - Reißig Silvia, Herdan Annika, Mechtcherine Viktor (2024-09)
Characterisation of the Rheological Behavior of a Resource-Saving Sustainable Concrete in the Context of 3D Printing - Sokolov Dmitrii, Mechtcherine Viktor (2024-09)
3D Vision in 3D Concrete Printing - Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-09)
Enhancing Inter-Layer Bond Strength and Flexural Performance in 3D Concrete Printing with SHCC Bonding Agents - Will Frank, Storch Florian, Plaschnick Paul, Taubert Markus et al. (2024-09)
Large-Scale Monolithic Printing with Ready-Mixed Concrete:
Challenges and Solutions - Perrot Arnaud, Jacquet Yohan, Caron Jean-François, Mesnil Romain et al. (2024-08)
Snapshot on 3D Printing with Alternative Binders and Materials:
Earth, Geopolymers, Gypsum and Low-Carbon Concrete - Tittelboom Kim, Mohan Dhanesh, Šavija Branko, Keita Emmanuel et al. (2024-08)
On the Micro-and Meso-Structure and Durability of 3D Printed Concrete Elements - Wolfs Robert, Bos Derk, Caron Jean-François, Gerke Markus et al. (2024-08)
On-Line and In-Line Quality-Assessment Across All Scale Levels of 3D Concrete Printing - Gleiser Leonie, Pierer Robin, Markin Slava, Butler Marko et al. (2024-07)
Additive Manufacturing with Earth-Based Materials:
Minimization of Shrinkage Deformation - Markin Slava, Combrinck Riaan, Mechtcherine Viktor (2024-07)
Specifics of Plastic Shrinkage in 3D Printed Concrete Elements - Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Mechtcherine Viktor, Sanjayan Jay (2024-07)
Alkali-Activated Waste Glass-Based Geopolymer Concrete for Digital Construction - Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Mechtcherine Viktor, Sanjayan Jay (2024-07)
Two-Part Print-Head Mixing of Hybrid Alkali-Activated Cement for Buildability Enhancement in 3D Concrete Printing - Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-07)
Development of Strain-Hardening Cementitious Composites (SHCC) As Bonding Materials to Enhance Inter-Layer and Flexural Performance of 3D Printed Concrete - Ivaniuk Egor, Tošić Zlata, Müller Steffen, Lordick Daniel et al. (2024-07)
Automated Manufacturing of Reinforced Modules of Segmented Shells Based on 3D Printing with Strain-Hardening Cementitious Composites - Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay, Mechtcherine Viktor (2024-06)
In-Process Textile Reinforcement Method for 3D Concrete Printing and Its Structural Performance - Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Mechtcherine Viktor, Sanjayan Jay (2024-05)
Print-Head Mixing of Geopolymer and OPC Slurries for Hybrid Alkali-Activated Cement in 3D Concrete Printing - Zuo Zibo, Corte Wouter, Huang Yulin, Chen Xiaoming et al. (2024-05)
Strategies Towards Large-Scale 3D Printing Without Size-Constraints - Mechtcherine Viktor, Kuhn Alexander, Mai (née Dressler) Inka, Nerella Venkatesh et al. (2024-03)
Additive Manufacturing with Concrete:
Guidelines for Planning and Implementing Projects - Neef Tobias, Müller Steffen, Mechtcherine Viktor (2024-03)
Integrating Continuous Mineral-Impregnated Carbon-Fibers into Digital Fabrication with Concrete - Ivaniuk Egor, Mechtcherine Viktor (2024-03)
Approach for Production of Textile-Reinforced Beams and Slabs Using Three-Dimensional Concrete Printing - Reißig Silvia, Bedolla Carolin, Meyer Tamara, Mechtcherine Viktor (2023-12)
Rheological Behavior of Fiber-Reinforced LC3 Fine-Grained Concrete in the Context of Additive Manufacturing - Zuo Zibo, Corte Wouter, Huang Yulin, Chen Xiaoming et al. (2023-11)
Propelling the Widespread Adoption of Large-Scale 3D Printing - Friese Danny, Hahn Lars, Le Xuan Hung, Mersch Johannes et al. (2023-10)
Robot-Assisted Manufacturing Technology for 3D Non-Metallic Reinforcement Structures in the Construction Applications - Markin Slava, Cordova Julian, Mechtcherine Viktor (2023-10)
Evolution of Capillary Pressure in 3D Printed Concrete Elements:
Numerical Modelling and Experimental Validation - Markin Slava, Mechtcherine Viktor (2023-10)
The Effect of Layer Cross-Section on Plastic Shrinkage Cracking of 3D Printed Concrete Elements - Curbach Manfred, Hegger Josef, Bielak Jan, Schmidt Christopher et al. (2023-10)
New Perspectives on Carbon Reinforced Concrete Structures:
Why New Composites Need New Design-Strategies - Bong Shin, Nematollahi Behzad, Mechtcherine Viktor, Li Victor et al. (2023-09)
3D Printed Engineered, Strain-Hardening Geopolymer Composite as Permanent Formwork for Construction of Reinforced Concrete Beam - Kruppa Henning, Kalthoff Matthias, Neef Tobias, Reißig Silvia et al. (2023-06)
Alkali-Activated Binder-Requirements for Extrusion and 3D Printing of Carbon-Reinforced Concrete - Neef Tobias, Dittel Gözdem, Scheurer Martin, Gries Thomas et al. (2023-06)
Utilizing Textiles as Integrated Formwork for Additive Manufacturing with Concrete - Neef Tobias, Kalthoff Matthias, Müller Steffen, Backes Jana et al. (2023-06)
Extrusion of High Yield Strength Carbon-Reinforced Concrete with Mineral Impregnated Rovings - Ding Tao, Xiao Jianzhuang, Mechtcherine Viktor (2023-05)
Microstructure and Mechanical Properties of Inter-Layer Regions in Extrusion-Based 3D Printed Concrete:
A Critical Review - Markin Slava, Mechtcherine Viktor (2023-03)
Quantification of Plastic Shrinkage and Plastic Shrinkage Cracking of the 3D Printable Concretes Using 2D Digital Image Correlation - Anleu Paula, Wangler Timothy, Nerella Venkatesh, Mechtcherine Viktor et al. (2023-03)
Using Micro-XRF to Characterize Chloride-Ingress Through Cold Joints in 3D Printed Concrete - Markin Slava, Mechtcherine Viktor (2023-01)
Methods for Measuring Plastic Shrinkage and Related Cracking of 3D Printed Concrete - Ivanova Irina, Mechtcherine Viktor, Reißig Silvia (2022-09)
Vergleich von Bewertungsmethoden für die rheologischen Eigenschaften von frisch gedrucktem Beton - Markin Slava, Mechtcherine Viktor (2022-09)
Rissbildung in 3D gedruckten Betonelementen infolge plastischen Schwindens:
Ursachen und Quantifizierungsmethoden - Mechtcherine Viktor (2022-09)
Additive Fertigung mit Beton - Neef Tobias, Mechtcherine Viktor (2022-09)
Additiv gefertigter Carbonbeton mit mineralischer Tränkung der Garne - Taubert Markus, Mechtcherine Viktor (2022-09)
3D druckbarer Normalbeton mit grober Gesteinskörnung - Bong Shin, Nematollahi Behzad, Nerella Venkatesh, Mechtcherine Viktor (2022-09)
Method of Formulating 3D Printable Strain-Hardening Alkali-Activated Composites for Additive Construction - Ivaniuk Egor, Tošić Zlata, Eichenauer Martin, Müller Steffen et al. (2022-09)
Automated Production of Textile Reinforced Concrete Modules for the Assembly of Shell Structures - Tošić Zlata, Eichenauer Martin, Ivaniuk Egor, Lordick Daniel et al. (2022-07)
Design and Optimization of Free-Form Surfaces for Modular Concrete 3D Printing - Bong Shin, Nematollahi Behzad, Nerella Venkatesh, Mechtcherine Viktor (2022-06)
Properties of 3D Printable Ductile Fiber-Reinforced Geopolymer Composite - Krenzer Knut, Palzer Ulrich, Müller Steffen, Mechtcherine Viktor (2022-06)
Simulation of 3D Concrete Printing Using Discrete Element Method - Markin Slava, Mechtcherine Viktor (2022-06)
Measuring Plastic Shrinkage and Related Cracking of 3D Printed Concretes - Neef Tobias, Müller Steffen, Mechtcherine Viktor (2022-06)
Integration of Mineral Impregnated Carbon-Fiber (MCF) into Fine 3D Printed Concrete Filaments - Reißig Silvia, Nerella Venkatesh, Mechtcherine Viktor (2022-06)
Material-Design and Rheological Behavior of Sustainable Cement-Based Materials in the Context of 3D Printing - Taubert Markus, Mechtcherine Viktor (2022-06)
Mix-Design for a 3D Printable Concrete with Coarse Aggregates and Consideration of Standardisation - Neef Tobias, Butler Marko, Mechtcherine Viktor (2022-06)
Integrating Mineral-Bonded Carbon Fibers into 3D Concrete Printing - Roussel Nicolas, Buswell Richard, Ducoulombier Nicolas, Ivanova Irina et al. (2022-06)
Assessing the Fresh Properties of Printable Cement-Based Materials:
High-Potential Tests for Quality-Control - Zhang Chao, Jia Zijian, Wang Xianggang, Jia Lutao et al. (2022-05)
A Two-Phase Design-Strategy Based on the Composite of Mortar and Coarse Aggregate for 3D Printable Concrete with Coarse Aggregate - Ivaniuk Egor, Eichenauer Martin, Tošić Zlata, Müller Steffen et al. (2022-05)
3D Printing and Assembling of Frame Modules Using Printable Strain-Hardening Cement-Based Composites - Mechtcherine Viktor, Tittelboom Kim, Kazemian Ali, Kreiger Eric et al. (2022-04)
A Roadmap for Quality-Control of Hardening and Hardened Printed Concrete - Liu Haoran, Ding Tao, Xiao Jianzhuang, Mechtcherine Viktor (2022-04)
Buildability Prediction of 3D Printed Concrete at Early-Ages:
A Numerical Study with Drucker-Prager-Model - Zhang Chao, Deng Zhicong, Chen Chun, Zhang Yamei et al. (2022-03)
Predicting the Static Yield-Stress of 3D Printable Concrete Based on Flowability of Paste and Thickness of Excess-Paste-Layer - Ivanova Irina, Ivaniuk Egor, Bisetti Sameercharan, Nerella Venkatesh et al. (2022-03)
Comparison Between Methods for Indirect Assessment of Buildability in Fresh 3D Printed Mortar and Concrete - Bos Freek, Menna Costantino, Pradena Mauricio, Kreiger Eric et al. (2022-03)
The Realities of Additively Manufactured Concrete Structures in Practice - Mechtcherine Viktor, Taubert Markus, Müller Steffen, Will Frank et al. (2022-03)
Additive Manufacturing of Monolithic, Steel-Reinforced Concrete Walls Using CONPrint3D-Reinforced Methods - Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2022-02)
Extrusion-Process-Simulation and Layer-Shape-Prediction During 3D Concrete Printing Using the Particle-Finite-Element-Method - Ivaniuk Egor, Ivanova Irina, Sokolov Dmitrii, Tošić Zlata et al. (2022-02)
Application-Driven Material-Design of Printable Strain-Hardening Cementitious Composites - Chen Yuning, Liu Chao, Cao Ruilin, Chen Chun et al. (2022-02)
Systematical Investigation of Rheological Performance Regarding 3D Printing Process for Alkali-Activated Materials:
Effect of Precursor Nature - Feys Dimitri, Schutter Geert, Fataei Shirin, Martys Nicos et al. (2022-01)
Pumping of Concrete:
Understanding a Common Placement Method with Lots of Challenges - Vasilić Ksenija, Hack Norman, Kloft Harald, Lowke Dirk et al. (2022-01)
Digitale Fertigung im Betonbau - Asprone Domenico, Menna Costantino, Bos Freek, Mata-Falcón Jaime et al. (2022-01)
Structural Design and Testing of Digitally Manufactured Concrete Structures - Buswell Richard, Bos Freek, Silva Wilson, Hack Norman et al. (2022-01)
Digital Fabrication with Cement-Based Materials:
Process Classification and Case Studies - Mechtcherine Viktor, Fataei Shirin, Bos Freek, Buswell Richard et al. (2022-01)
Digital Fabrication with Cement-Based Materials:
Underlying Physics - Putten Jolien, Nerella Venkatesh, Mechtcherine Viktor, Hondt Mélody et al. (2022-01)
Properties and Testing of Printed Cement-Based Materials in Hardened State - Ivaniuk Egor, Müller Steffen, Neef Tobias, Mechtcherine Viktor (2021-11)
Strategies for Integrating Reinforcement Into 3D Concrete Printing at the TU Dresden - Neef Tobias, Mechtcherine Viktor (2021-11)
Simultaneous Integration of Continuous Mineral-Bonded Carbon Reinforcement Into Additive Manufacturing with Concrete - Markin Slava, Schröfl Christof, Blankenstein Paul, Mechtcherine Viktor (2021-11)
Three-Dimensional-Printed Wood-Starch Composite as Support Material for 3D Concrete Printing - Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2021-09)
Particle-Finite-Element-Simulation of Extrusion-Processes of Fresh Concrete During 3D Concrete Printing - Mechtcherine Viktor, Mai (née Dressler) Inka, Empelmann Martin, Gehlen Christoph et al. (2021-09)
Digital Concrete Construction by Means of Additive Processes:
State of the Art and Research Needs - Perrot Arnaud, Pierre Alexandre, Nerella Venkatesh, Wolfs Robert et al. (2021-07)
From Analytical Methods to Numerical Simulations:
A Process Engineering Toolbox for 3D Concrete Printing - Fataei Shirin, Secrieru Egor, Mechtcherine Viktor, Roussel Nicolas (2021-07)
A First-Order Physical Model for the Prediction of Shear-Induced Particle-Migration and Lubricating-Layer Formation During Concrete Pumping - Bhattacherjee Shantanu, Basavaraj Anusha, Rahul Attupurathu, Santhanam Manu et al. (2021-06)
Sustainable Materials for 3D Concrete Printing - Zhang Chao, Nerella Venkatesh, Krishna Anurag, Wang Shen et al. (2021-06)
Mix-Design Concepts for 3D Printable Concrete:
A Review - Markin Slava, Krause Martin, Otto Jens, Schröfl Christof et al. (2021-06)
3D Printing with Foam-Concrete:
From Material Design and Testing to Application and Sustainability - Xiao Jianzhuang, Ji Guangchao, Zhang Yamei, Ma Guowei et al. (2021-06)
Large-Scale 3D Printing Concrete Technology:
Current Status and Future Opportunities - Mechtcherine Viktor (2021-04)
Digital Building:
3D Printing with Concrete - Ghourchian Sadegh, Butler Marko, Krüger Markus, Mechtcherine Viktor (2021-04)
Modelling the Development of Capillary Pressure in Freshly 3D Printed Concrete Elements - Sikora Paweł, Chougan Mehdi, Cuevas Villalobos Karla, Liebscher Marco et al. (2021-02)
The Effects of Nano- and Micro-Sized Additives on 3D Printable Cementitious and Alkali-Activated Composites:
A Review - Mechtcherine Viktor, Buswell Richard, Kloft Harald, Bos Freek et al. (2021-02)
Integrating Reinforcement in Digital Fabrication with Concrete:
A Review and Classification Framework - Neef Tobias, Müller Steffen, Mechtcherine Viktor (2020-11)
3D Printing with Carbon Concrete:
Technology and the First Test Results - Markin Slava, Ivanova Irina, Fataei Shirin, Reißig Silvia et al. (2020-07)
Investigation on Structural Build-Up of 3D Printable Foam-Concrete - Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schmeier Tobias (2020-06)
Extrusion-Based Additive Manufacturing with Carbon Reinforced Concrete:
Concept and Feasibility Study - Buswell Richard, Silva Wilson, Bos Freek, Schipper Roel et al. (2020-05)
A Process Classification Framework for Defining and Describing Digital Fabrication with Concrete - Li Victor, Bos Freek, Yu Kequan, McGee Wesley et al. (2020-04)
On the Emergence of 3D Printable Engineered, Strain-Hardening Cementitious Composites - Ivanova Irina, Mechtcherine Viktor (2020-03)
Effects of Volume Fraction and Surface Area of Aggregates on the Static Yield-Stress and Structural Build-Up of Fresh Concrete - Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
Extrusion-Based Additive Manufacturing with Cement-Based Materials:
Production Steps, Processes, and Their Underlying Physics - Ivanova Irina, Mechtcherine Viktor (2020-01)
Possibilities and Challenges of Constant Shear-Rate-Test for Evaluation of Structural Build-Up-Rate of Cementitious Materials - Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schneider Kai et al. (2019-11)
New Carbon Fiber Reinforcement for Digital, Automated Concrete Construction - Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schneider Kai et al. (2019-11)
Mineral-Impregnated Carbon-Fiber Composites as Novel Reinforcement for Concrete Construction:
Material and Automation Perspectives - Nerella Venkatesh, Krause Martin, Mechtcherine Viktor (2019-11)
Direct Printing-Test for Buildability of 3D Printable Concrete Considering Economic Viability - Markin Slava, Šahmenko Genādijs, Nerella Venkatesh, Näther Mathias et al. (2019-11)
Investigations on the Foam-Concrete Production Techniques Suitable for 3D Printing with Foam-Concrete - Zhang Chao, Hou Zeyu, Chen Chun, Zhang Yamei et al. (2019-09)
Design of 3D Printable Concrete Based on the Relationship Between Flowability of Cement-Paste and Optimum Aggregate-Content - Mechtcherine Viktor, Nerella Venkatesh, Will Frank, Näther Mathias et al. (2019-08)
Large-Scale Digital Concrete Construction:
CONPrint3D Concept for On-Site, Monolithic 3D Printing - Markin Slava, Nerella Venkatesh, Schröfl Christof, Guseynova Gyunay et al. (2019-07)
Material-Design and Performance-Evaluation of Foam-Concrete for Digital Fabrication - Nerella Venkatesh, Mechtcherine Viktor (2019-02)
Studying the Printability of Fresh Concrete for Formwork-Free Concrete Onsite 3D Printing Technology (CONPrint3D) - Kaufhold Julia, Kohl Johannes, Nerella Venkatesh, Schröfl Christof et al. (2019-02)
Wood-Based Support Material for Extrusion-Based Digital Construction - Perrot Arnaud, Rangeard Damien, Nerella Venkatesh, Mechtcherine Viktor (2019-02)
Extrusion of Cement-Based Materials:
An Overview - Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing - Nematollahi Behzad, Vijay Praful, Sanjayan Jay, Nazari Ali et al. (2018-11)
Effect of Polypropylene Fiber Addition on Properties of Geopolymers Made by 3D Printing for Digital Construction - Nerella Venkatesh, Beigh Mirza, Fataei Shirin, Mechtcherine Viktor (2018-11)
Strain-Based Approach for Measuring Structural Build-Up of Cement-Pastes in the Context of Digital Construction - Mechtcherine Viktor, Nerella Venkatesh (2018-10)
3D-Concrete-Printing by Selective Deposition:
Requirements for Fresh Concrete and Testing - Nerella Venkatesh, Näther Mathias, Iqbal Arsalan, Butler Marko et al. (2018-09)
In-Line Quantification of Extrudability of Cementitious Materials for Digital Construction - Mechtcherine Viktor, Nerella Venkatesh, Ogura Hiroki, Grafe Jasmin et al. (2018-09)
Alternative Reinforcements for Digital Concrete Construction - Schröfl Christof, Nerella Venkatesh, Mechtcherine Viktor (2018-09)
Capillary Water Intake by 3D Printed Concrete Visualised and Quantified by Neutron Radiography - Ogura Hiroki, Nerella Venkatesh, Mechtcherine Viktor (2018-08)
Developing and Testing of Strain-Hardening Cement-Based Composites (SHCC) in the Context of 3D Printing - Schutter Geert, Lesage Karel, Mechtcherine Viktor, Nerella Venkatesh et al. (2018-08)
Vision of 3D Printing with Concrete:
Technical, Economic and Environmental Potentials - Nerella Venkatesh, Ogura Hiroki, Mechtcherine Viktor (2018-07)
Incorporating Reinforcement into Digital Concrete Construction - Mechtcherine Viktor, Grafe Jasmin, Nerella Venkatesh, Spaniol Erik et al. (2018-05)
3D Printed Steel-Reinforcement for Digital Concrete Construction:
Manufacture, Mechanical Properties and Bond Behavior - Secrieru Egor, Khodor Jad, Schröfl Christof, Mechtcherine Viktor (2018-05)
Formation of Lubricating Layer and Flow Type During Pumping of Cement-Based Materials - Mechtcherine Viktor, Nerella Venkatesh (2018-04)
Incorporating Reinforcement in 3D-Printing with Concrete - Secrieru Egor, Cotardo Dario, Mechtcherine Viktor, Lohaus Ludger et al. (2018-04)
Changes in Concrete Properties During Pumping and Formation of Lubricating Material Under Pressure - Nerella Venkatesh, Mechtcherine Viktor (2018-03)
Virtual Sliding-Pipe Rheometer for Estimating Pumpability of Concrete - Mechtcherine Viktor, Nerella Venkatesh (2018-02)
3D Printing with Concrete:
State-of-the-Art, Trends, Challenges - Secrieru Egor, Fataei Shirin, Schröfl Christof, Mechtcherine Viktor (2017-04)
Study on Concrete Pumpability Combining Different Laboratory Tools and Linkage to Rheology - Beigh Mirza, Nerella Venkatesh, Schröfl Christof, Mechtcherine Viktor (2015-06)
Studying the Rheological Behavior of Limestone-Calcined-Clay-Cement (LC3) Mixtures in the Context of Extrusion-Based 3D Printing - Secrieru Egor, Butler Marko, Mechtcherine Viktor (2014-11)
Testing Pumpability of Concrete:
From Laboratory into Practice - Mechtcherine Viktor, Gram Annika, Krenzer Knut, Schwabe Jörg-Henry et al. (2014-03)
Simulation of Fresh Concrete Flow Using Discrete Element Method (DEM) - Mechtcherine Viktor, Nerella Venkatesh, Kasten Knut (2013-12)
Testing Pumpability of Concrete Using Sliding-Pipe Rheometer