#digital¶

Keywords by Co - Occurrence¶

#concrete (131) #fabrication (111) #construction (66) #print (58) #design (32)

1. Bos Derk, Deetman Arjen, Wolfs Robert (2026-04)
   Correlating in-Line Sensor Data to Hardened State Material Properties in Digital Fabrication with Concrete
2. Reißig Silvia, Mechtcherine Viktor (2026-03)
   Assessing and Modeling the Buildability of Cement-Based Materials in the Context of Digital Fabrication
3. Lolli Francesca, Mehlomakulu Bungane, Azari Jafari Hessam, Kirchain Randolph et al. (2026-02)
   On the Sustainability of Digital Construction:
   Whole Building Life Cycle Carbon Emissions According to Three Construction Techniques
4. Versteege Jelle, Salet Theo, Wolfs Robert (2026-02)
   Sensory Data Mapping and Database Development for Interlayer Bond Strength:
   Towards Digital Shadows in 3D Concrete Printing
5. Mirmotalebi Seyedali, Moon Hyosoo, Tesiero Raymond, Noor Sadia (2026-02)
   Comparative Evaluation of Voxel and Mesh Representations for Digital Defect Detection in Construction-Scale Additive Manufacturing.
6. Neef Tobias, Wen Yue, Friese Danny, Cherif Chokri et al. (2026-02)
   Digital Fabrication Methods for Carbon Reinforced Shell-Like Concrete Structures
7. Kazemian Mona, Rogers Carl (2026-01)
   3D Printed Green Walls:
   Enhancing Living Systems Through Digital Fabrication
8. Sawicki Bartłomiej, Düking Peter, Placzek Gerrit, Masur Lukas et al. (2026-01)
   Human-Robot Collaboration in Digital Fabrication with Concrete:
   Quantifying Productivity and Psychophysiological Strain of Human Workers
9. Matos Ana, Fonseca Mariana, Milheiro-Oliveira Paula, Pimentel Mário (2026-01)
   Design of Eco-Efficient »Concrete« for Digital Fabrication
10. Dubey Pratik, Maurya Madan (2026-01)
    A Comprehensive Review of 3D Printing in Construction:
    Technology, Materials, and Digital Workflow
11. Aroso Francisca, Reis Rui, Brandão Filipe, Figueiredo Bruno et al. (2026-01)
    Assessing Orthotropic Mechanical Performance and Digital Twin of Robotic 3D Printed Cementitious Mortars with Fibers and Metal Reinforcements
12. Zhu Binrong, Qi Miao, Chen Wei, Pan Jinlong (2025-12)
    Anisotropic Mechanical Properties of 3D Printed Low-Carbon Concrete and Connection Strategies for Large-Scale Reusable Formwork in Digital Construction
13. Skoury Lior, Asaf Ofer, Sprecher Aaron, Menges Achim et al. (2025-12)
    Data-Informed Digital Twin for Large-Scale 3D Printing in Construction
14. Kovaleva Daria, Haufe Carl, Miller Olga, Gericke Oliver et al. (2025-12)
    Lightweight and Sustainable Construction with Concrete:
    The Role of Digital Design and Manufacturing Methods at ILEK
15. Kloft Harald (2025-12)
    Digital Building Fabrication – The Path Towards the Unity of Material, Process and Form:
    A Personal Reflection from Research and Practice
16. Ruiz Pedro, Perez Pablo, García-Alvarado Rodrigo, Valenzuela Sebastián et al. (2025-11)
    3D Printing of Surrealist Dreams:
    Constraints, Failures, and Craftsmanship in 1:1 Digital Fabrication
17. Patel Aniket, Tripathi Avinaya, Kiran Ravi, Santhanam Manu et al. (2025-11)
    Decoupling Early-Age Free Shrinkage and Restraint Effects in 3D Printed Concrete Using Digital Image Correlation
18. Sahu Akshay, Panda Biranchi (2025-11)
    An Additive Manufacturing-Oriented Design Approach for Digital Construction
19. Zhang Nan, Sanjayan Jay (2025-08)
    Concrete 3D Printing and Digital Fabrication Technologies for Bridge Construction
20. Banda-Pérez Pablo, Georgiou Ioulios, Carrasco Pérez Patricio, Soria Romanella et al. (2025-07)
    Deployment for Additive Construction Through Digital Platforms:
    Gananoque Project as a Case Study
21. Marco Giancarlo, Asta J. (2025-06)
    Neobrutalism:
    The Digital and Cultural Micro-Landscape of 3D-Printed Concrete
22. Divya M., Riza S., Shariff Najeeb (2025-06)
    Characterization of Cold Joint Formation in Digitally Printed Mortar During the Dormant Phase:
    A Time-Dependent Study
23. Gantner Stefan, Rennen Philipp, Amiri Fatemeh, Rothe Tom et al. (2025-05)
    Robotic Frame Winding:
    Prefabricated Fiber Structures as Formwork and Reinforcement for Digitally Fabricated Shell-Like Concrete Elements
24. Dörrie Robin, Gantner Stefan, Amiri Fatemeh, Lachmayer Lukas et al. (2025-04)
    From Digital to Real:
    Optimised and Functionally Integrated Shotcrete 3D Printing Elements for Multi-Storey Structures
25. Hua Hao, Liu Yizhuo, Hovestadt Ludger, He Siyuan et al. (2025-04)
    Digital Nervi:
    Performance‐based Design of Lightweight Isostatic Ribbed Slab with 3D Printed Concrete Formwork
26. Dobrzanski James, Xu Jie, Bartek Rasti, Becker Daniel et al. (2025-04)
    From Digital Crafting to Digital Manufacturing:
    Automated Production Using Hybrid 3D Concrete Printing
27. Kloft Harald, Hack Norman, Sawicki Bartłomiej, Dörrie Robin et al. (2025-03)
    Digital Fabrication Strategies for Sustainability
28. Gautam Kushagra, Solav Dana, Barath Shany, Austern Guy (2025-03)
    Using Digital Image Correlation to Analyze Deformation in Wood-Based Liquid Deposition Modelling
29. Zuo Zibo, Zhang Yamei, Li Jin, Huang Yulin et al. (2025-03)
    Systematic Workflow for Digital Design and On-Site 3D Printing of Large Concrete Structures:
    A Case Study of a Full-Size Two-Story Building
30. Das Arnesh, Wenger Cedric, Walpen Lukas, Flatt Robert (2025-02)
    Early-Age Hydration of Accelerated Low-Carbon Cements for Digital Fabrication
31. Çapunaman Özgüç, Farrokhsiar Paniz, Bilén Sven, Duarte José et al. (2025-01)
    Vision-Based Sensing and Digital Twin-Technologies in Conformal 3D Concrete Printing:
    Exploring Operational Accuracy, Adaptability, and Scalability, and Investigating Monitoring-Capabilities in Large-Scale Applications
32. Nadi Mouad, Majdoubi Hicham, Haddaji Younesse, Bili Oumaima et al. (2025-01)
    Digital Fabrication Processes for Cementitious Materials Using Three-Dimensional 3D Printing Technologies
33. Baş Sercan, Aydın Ozan, Bundur Zeynep, Guven Gursans (2025-01)
    Building Information Modeling (BIM)-Based On-Site 3D Printer Position-Optimization and Path-Planning for Digital Fabrication
34. Heinze Lisa, Liebringshausen Anne, Eversmann Philipp (2024-11)
    3D Printing with Wood Waste:
    Development of Reusable Printing Material Based on Waste Wood Particles and Its Digital Manufacturing Process for Wall Constructions in Architecture
35. Tish Daniel, Gan Amelia, Cabral Sophia, Bechthold Martin (2024-11)
    Toward a Digital Vernacular:
    Framework for Localized Biocomposite 3D-Printing with Natural Fibers
36. Raza Saim, Sakha Mahsa, Manshadi Behzad, Fan Haifeng et al. (2024-11)
    Digital Fabrication of Ribbed Slabs with Post-Tensioned 3D Printed Concrete Formwork
37. Soave Francesco, Muciaccia Giovanni, Ferrara Liberato (2024-11)
    An Indirect Methodology to Evaluate the Rheological Properties of a Digitally Fabricated Concrete Incorporating Corrosion Inhibitors
38. Kloft Harald, Sawicki Bartłomiej, Bos Freek, Dörrie Robin et al. (2024-09)
    Interaction of Reinforcement, Process, and Form in Digital Fabrication with Concrete
39. Andreou Vasilis, Kontovourkis Odysseas (2024-09)
    Formwork-Optimization for Complex 3D Concrete Printing:
    A Unified Theoretical, Digital, and Experimental Framework
40. Haufe Carl, Castel Paula, Strahm Benedikt, Nigl David et al. (2024-09)
    A Digital Design Process for Bundling of Void Formers for Application in Functionally Graded Concrete
41. Monfort Maxime, Kim Jongbeom, Schaeffer Julien, Pastorelli Florent et al. (2024-09)
    Sprayed Concrete Automation:
    A Unique and Complete Digital Fabrication Method
42. Gürel Şeyma, Chen Wei-Ting, Wangler Timothy, Lloret-Fritschi Ena et al. (2024-09)
    Scaling up in Digital Casting of Concrete:
    Towards Industry Integration
43. Ammann Rebecca, Gebhard Lukas, Thoma Karel, Mata-Falcón Jaime et al. (2024-09)
    Environmental Benefits of Concrete Floor Slabs Produced with Digitally Fabricated Formworks:
    A Case Study
44. Corfe Ian (2024-09)
    A Digital Library for Using Mine-Tailings in Low-Carbon Concrete Replacements for Mine Back-Filling & 3D Printing
45. Gürel Şeyma, Wangler Timothy, Garger Moritz, Flatt Robert (2024-09)
    Residence-Time-Distribution Evaluation Method for In-Line Mixing Processes in Digital Concrete
46. Versteege Jelle, Wolfs Robert, Salet Theo (2024-09)
    A Data-Driven View on Digital Fabrication with Concrete:
    The Case of Inter-Layer Bond Strength
47. Neef Tobias, Görtzen Tom, Niemeyer Alice, Mechtcherine Viktor (2024-09)
    Investigation of Digitally Produced, Interlocking Concrete Blocks for a Modular Slab Construction
48. Mahmoudi Matineh, Wangler Timothy, Flatt Robert (2024-09)
    Robustness of Digital Concrete:
    Effects of Temperature, Accelerator Type and Dosage
49. Demont Léo, Mesnil Romain, Caron Jean-François (2024-09)
    Structuration-Rate-Measurement Using a Digital Pocket Vane
50. Gosslar Joschua, Dorresteijn Evelien, David Martin, Leusmann Thorsten et al. (2024-09)
    Digital Fabrication with Local Earthen Materials:
    The Relevance of Process Robustness
51. Tao Yaxin, Tittelboom Kim, Rahul Attupurathu, Wangler Timothy et al. (2024-09)
    Static Mixing for Set-on-Demand of Digital Concrete
52. Unglaub Julian, Müggenburg Marc, Jahns Hendrik, Kloft Harald et al. (2024-09)
    Towards a Digital Twin to Enable First Time Right DED-Arc Components
53. Hage Ali, Paquet Elodie, Leklou Ali, Neu Thibault et al. (2024-09)
    Navigating the Digital Chain in Concrete 3D Printing
54. Kurup Davya, Rahul Attupurathu (2024-09)
    Early-Age Shrinkage Measurement in 3D Printed Con-Crete by Digital Image Correlation:
    Influence of Spray Paints
55. Hechtl Christian, Kränkel Thomas, Gehlen Christoph (2024-09)
    Investigations into the Dynamics of Penetration Tests in Digital Fabrication
56. Carpo Mario (2024-09)
    The Sustainable Lightness of Digital Fabrication
57. Jenny David, Gramazio Fabio, Kohler Matthias (2024-09)
    Reimagining Earthen Materials:
    The New Era of Sustainable and Digital Construction
58. Feringa Jelle (2024-09)
    Scalable Equals Sustainable:
    The New Era of Sustainable and Digital Construction
59. Lloret-Fritschi Ena, Jenny Ercan, Jenny David (2024-09)
    A New Future of Construction:
    Digital Fabrication and Sustainability
60. Wangler Timothy, Patankar Yamini, Flatt Robert (2024-09)
    Sustainable Digital Concrete:
    Myth, Reality or Emerging Opportunity?
61. Lowke Dirk, Anton Ana-Maria, Buswell Richard, Jenny Ercan et al. (2024-09)
    Digital Fabrication with Concrete Beyond Horizontal Planar Layers
62. Gebhard Lukas, Mata-Falcón Jaime, Ammann Rebecca, Pressmair Nadine et al. (2024-08)
    Enhancing Structural Efficiency with Digital Concrete:
    Principles, Opportunities and Case Studies
63. Wangler Timothy, Tao Yaxin, Das Arnesh, Mahmoudi Matineh et al. (2024-08)
    Aluminate 2K Systems in Digital Concrete:
    Process, Design, Chemistry, and Outlook
64. Lin Xiqiang, Wang Hailong, Sun Xiaoyan, Kikhia Wael et al. (2024-07)
    Construction Technology of the Curved Mars House Digital Hotel Project in China Using Concrete 3D Printing
65. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Mechtcherine Viktor, Sanjayan Jay (2024-07)
    Alkali-Activated Waste Glass-Based Geopolymer Concrete for Digital Construction
66. Antorveza Paez Karen, Ling Andrea, Mahamaliyev Nijat, Bauer Georg et al. (2024-07)
    Digital Fabrication of Biologically Cemented Spatial Structures
67. Salaimanimagudam M., Jayaprakash Jaganathan (2024-07)
    Selection of Digital Fabrication Technique in the Construction Industry:
    A Multi-Criteria Decision-Making Approach
68. Wangler Timothy, Vangen Kathrina, Burger Joris, Flatt Robert (2024-05)
    Digital Fabrication Material-Processing-Strategy for Bespoke Low-Clinker Mass-Concrete Components
69. Mu Ru, Chen Jiao, Qing Longbang, Fan Chunhao et al. (2024-05)
    Properties of a Steel-Fiber-Reinforced Cementitious Composite Stool with Digitally Distributed Steel-Fibers
70. Petruzzi Elena, Tsamis Alexandros, Ullal Chaitanya (2024-04)
    Toward a Digital Design Framework for the Thermal Tunability of 3D Printed Envelopes
71. Hitzegrad Jan, Brohmann Leon, Herding Friedrich, Pfennings Kai et al. (2024-04)
    Surfaces of Coastal Biogenic Structures:
    Exploiting Advanced Digital Design and Fabrication-Strategies for the Manufacturing of Oyste-Reef- and Mussel-Bed-Surrogates
72. Peng Yiming, Unluer Cise (2024-04)
    Understanding the Rheological Behavior of Reactive Magnesia-Metakaolin System in the Context of Digital Construction
73. Yu Haoxuan, Wen Bodong, Zahidi Izni, Chow Ming et al. (2024-04)
    Constructing the Future:
    Policy-Driven Digital Fabrication in China's Urban Development
74. Rojas Jorge, Hasanzadeh Sognad (2024-03)
    Novel Digital Twin Architecture for 3D Concrete Printing in the AEC Industry
75. Barjuei Erfan, Capitanelli Alessio, Bertolucci Riccardo, Courteille Eric et al. (2024-03)
    Digital Workflow for Printability Checking and Prefabrication in Robotic Construction 3D Printing Based on Artificial Intelligence Planning
76. Neef Tobias, Müller Steffen, Mechtcherine Viktor (2024-03)
    Integrating Continuous Mineral-Impregnated Carbon-Fibers into Digital Fabrication with Concrete
77. Ruitinga Volker, Avramiea Emma (2023-12)
    Custom-Made Print-Heads Empowering 3D Printed Concrete:
    Innovations in Digital Design and Fabrication of Complex Prefabricated Elements
78. Maitenaz Sébastien, Mesnil Romain, Féraille Adélaïde, Caron Jean-François (2023-12)
    Materialising Structural Optimization of Reinforced Concrete Beams Through Digital Fabrication
79. Bos Derk, Wolfs Robert (2023-12)
    A Quality-Control Framework for Digital Fabrication with Concrete
80. Nair Sooraj, Tripathi Avinaya, Neithalath Narayanan (2023-11)
    Constitutive Response and Failure Progression in Digitally Fabricated 3D Printed Concrete Under Compression and Their Dependence on Print Layer-Height
81. Bosbach Sven, Kalthoff Matthias, Cruz Cynthia, Adam Viviane et al. (2023-11)
    Digital Prefabrication of Lightweight Building Elements for Circular Economy:
    Material-Minimised Ribbed Floor Slabs Made of Extruded Carbon Reinforced Concrete (ExCRC)
82. Carbone Carlo, Mohamed Basem (2023-11)
    From Analogue to Digital:
    Evolution of Building Machines Towards Reforming Production and Customization of Housing
83. Mata-Falcón Jaime, Gebhard Lukas, Lee Minu, Bischof Patrick (2023-10)
    Advances in Structural Applications of Digital Fabrication With Concrete
84. Slepicka Martin, Mawas Karam, Borrmann André, Maboudi Mehdi et al. (2023-09)
    Digital Twinning in Additive Manufacturing:
    Closing the Digital-Physical-Digital Loop by Automated Integration of Captured Geometric Data into Fabrication Information Models
85. Yin Xunzhi, Guo Chong, Sun Bo, Chen Honggang et al. (2023-09)
    The State of the Art in Digital Construction of Clay Buildings:
    Reviews of Existing Practices and Recommendations for Future Development
86. Jendele Libor, Rymeš Jiří, Červenka Jan (2023-09)
    Optimizing Digital 3D Printing of Concrete Structures
87. Ye Junhong, Teng Fei, Yu Jie, Yu Shiwei et al. (2023-08)
    Development of 3D Printable Engineered Cementitious Composites with Incineration-Bottom-Ash for Sustainable and Digital Construction
88. Zhang Daobo, Feng Peng, Zhou Peizhao, Xu Weiguo et al. (2023-06)
    3D Printed Concrete Walls Reinforced with Flexible FRP Textile:
    Automatic Construction, Digital Rebuilding, and Seismic Performance
89. Mozaffari Salma, Bruce Mackenzie, Clune Gabrielle, Xie Ruxin et al. (2023-06)
    Digital Design and Fabrication of Clay Formwork for Concrete Casting
90. Graser Konrad, Walzer Alexander, Hunhevicz Jens, Jähne René et al. (2023-06)
    Qualitative Technology Evaluation of Digital Fabrication with Concrete:
    Conceptual Framework and Scoreboard
91. Haar Bjorn, Kruger Jacques, Zijl Gideon (2023-06)
    A System-Development-Strategy of a Digital Construction for Building Frames
92. Vespalec Arnošt, Podroužek Jan, Koutný Daniel (2023-04)
    DoE Approach to Setting Input Parameters for Digital 3D Printing of Concrete for Coarse Aggregates up to 8 mm
93. Ibrahim Kamoru, Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-03)
    Influence of Effective Micro-Organisms on the Rheology and Fresh State Properties of SCMs-Based Concrete for Digital Fabrication
94. Markin Slava, Mechtcherine Viktor (2023-03)
    Quantification of Plastic Shrinkage and Plastic Shrinkage Cracking of the 3D Printable Concretes Using 2D Digital Image Correlation
95. Tuvayanond Wiput, Prasittisopin Lapyote (2023-02)
    Design for Manufacture and Assembly of Digital Fabrication and Additive Manufacturing in Construction:
    A Review
96. Wang Yuxin, Aslani Farhad, Dyskin Arcady, Pasternak Elena (2023-01)
    Digital Twin Applications in 3D Concrete Printing
97. Lootens Didier (2023-01)
    Giving Shape and Functionality to the Matter:
    Digital Construction
98. Bischof Patrick, Mata-Falcón Jaime, Ammann Rebecca, Näsbom Andreas et al. (2022-12)
    Digitally Fabricated Weak Interfaces to Reduce Minimum Reinforcement in Concrete Structures
99. Salaimanimagudam M., Jayaprakash Jaganathan (2022-11)
    Optimum Selection of Reinforcement, Assembly, and Formwork System for Digital Fabrication Technique in Construction Industry:
    A Critical Review
100. Li Shuai, Nguyen-Xuan Hung, Tran Jonathan (2022-11)
     Digital Design and Parametric Study of 3D Concrete Printing on Non-Planar Surfaces
101. Mehdizadeh Samim, Zimmermann Adrian, Tessmann Oliver (2022-09)
     RotoColumn:
     A Continuous Digital Fabrication Framework for Casting Large-Scale Linear Concrete Hollow Elements
102. Nuh Mishael, Oval Robin, Orr John, Shepherd Paul (2022-09)
     Digital Fabrication of Ribbed Concrete Shells Using Automated Robotic Concrete Spraying
103. Mata-Falcón Jaime, Bischof Patrick, Huber Tobias, Anton Ana-Maria et al. (2022-09)
     Digitally Fabricated Ribbed Concrete Floor Slabs:
     A Sustainable Solution for Construction
104. Ma Jiaming, Gomaa Mohamed, Bao Ding, Javan Anooshe et al. (2022-09)
     Print Nervi:
     Design and Construction of a Ribbed Floor System in the Digital Era
105. Bischof Patrick, Mata-Falcón Jaime, Kaufmann Walter (2022-08)
     Fostering Innovative and Sustainable Mass-Market Construction Using Digital Fabrication with Concrete
106. Peng Guanhong (2022-08)
     Digital Fabrication and Mechanical Properties of 3D Printing Concrete
107. Slepicka Martin, Vilgertshofer Simon, Borrmann André (2022-07)
     Fabrication Information Modeling:
     Interfacing Building Information Modeling with Digital Fabrication
108. Kim Tae, Nguyen Duy, Shim Chang (2022-06)
     Digital Fabrication for DfMA of a Prefabricated Bridge Pier
109. Schmid Robert, Hansemann Georg, Autischer Michael, Juhart Joachim (2022-06)
     Adaptive Foam-Concrete in Digital Fabrication
110. Jacquet Yohan, Perrot Arnaud, Picandet Vincent (2022-06)
     Monitoring Strain Using Digital Image Correlation During Compressive and Tensile Loading:
     Assessment of Critical Strain of Cement-Based Materials Containing VMA
111. Bischof Patrick, Mata-Falcón Jaime, Burger Joris, Kaufmann Walter (2022-06)
     Digitally Fabricated Keyed Concrete Connections
112. Xiao Yinan, Hack Norman, Kloft Harald (2022-06)
     Digital Structural Design and Shotcrete 3D Printing-Strategies for Lightweight Reinforced Concrete Beam-Grid Structures
113. Buswell Richard (2022-06)
     CCR Digital Concrete 2022 SI:
     Editorial
114. Mawas Karam, Maboudi Mehdi, Gerke Markus (2022-05)
     Automatic Geometric Inspection in Digital Fabrication
115. Flatt Robert, Wangler Timothy (2022-05)
     On Sustainability and Digital Fabrication with Concrete
116. Lloret-Fritschi Ena, Quadranti Elia, Scotto Fabio, Fuhrimann Lukas et al. (2022-05)
     Additive Digital Casting:
     From Lab to Industry
117. Wu Hao, Li Ziyan, Zhou Xinjie, Wu Xinyu et al. (2022-04)
     Digital Design and Fabrication of a 3D Concrete Printed Funicular Spatial Structure
118. Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2022-04)
     Slow Penetration for Characterizing Concrete for Digital Fabrication
119. Wangler Timothy, Pileggi Rafael, Gürel Şeyma, Flatt Robert (2022-03)
     A Chemical Process Engineering Look at Digital Concrete Processes:
     Critical Step Design, In-Line Mixing, and Scale-Up
120. Filho Fernando, Chen Yu, Çopuroğlu Oğuzhan (2022-03)
     Nano-Modification in Digital Manufacturing of Cementitious Composites
121. Ali Md., Issayev Gani, Shehab Essam, Sarfraz Shoaib (2022-02)
     A Critical Review of 3D Printing and Digital Manufacturing in Construction Engineering
122. Boscaro Federica, Quadranti Elia, Wangler Timothy, Mantellato Sara et al. (2022-02)
     Eco-Friendly, Set-on-Demand Digital Concrete
123. Gomaa Mohamed, Jabi Wassim, Soebarto Veronica, Xie Yi (2022-01)
     Digital Manufacturing for Earth Construction:
     A Critical Review
124. Roussel Nicolas, Lowke Dirk, Buswell Richard (2022-01)
     Digital Fabrication with Cement-Based Materials:
     The RILEM D.F.C. Technical Committee
125. Buswell Richard, Bos Freek, Silva Wilson, Hack Norman et al. (2022-01)
     Digital Fabrication with Cement-Based Materials:
     Process Classification and Case Studies
126. Asprone Domenico, Menna Costantino, Bos Freek, Mata-Falcón Jaime et al. (2022-01)
     Structural Design and Testing of Digitally Manufactured Concrete Structures
127. Mechtcherine Viktor, Fataei Shirin, Bos Freek, Buswell Richard et al. (2022-01)
     Digital Fabrication with Cement-Based Materials:
     Underlying Physics
128. Slepicka Martin, Vilgertshofer Simon, Borrmann André (2021-11)
     Fabrication Information Modeling:
     Closing the Gap between Building Information Modeling and Digital Fabrication
129. Dittel Gözdem, Scheurer Martin, Dringenberg Steffen, Jitton Joaquin et al. (2021-11)
     Digital Concrete Production with Vertical Textile Reinforcement
130. Deshmukh Aparna, Heintzkill Reed, Huerta Rosalba, Sobolev Konstantin (2021-11)
     Rheological Response of Magnetorheological Cementitious Inks Tuned for Active Control in Digital Construction
131. Ko Lesley, Moro Sandro, Bury Jeff, Vickers Tom et al. (2021-11)
     Rheology and Setting Control of Concrete for Digital Construction
132. Graser Konrad, Kahlert Aniko, Hall Daniel (2021-10)
     DFAB HOUSE:
     Implications of a Building-Scale Demonstrator for Adoption of Digital Fabrication in AEC
133. Rollakanti Chiranjeevi, Prasad C., Joe Adams (2021-10)
     Digital Concrete for Sustainable Construction Industry:
     A State of the Art Review
134. Frangez Valens, Lloret-Fritschi Ena, Taha Nizar, Gramazio Fabio et al. (2021-10)
     Depth-Camera-Based Rebar Detection and Digital Reconstruction for Robotic Concrete Spraying
135. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Khayat Kamal et al. (2021-10)
     Digital Fabrication of Eco-Friendly Ultra-High-Performance Fiber-Reinforced Concrete
136. Gebhard Lukas, Mata-Falcón Jaime, Markić Tomislav, Kaufmann Walter (2021-09)
     Aligned Inter-Layer Fiber-Reinforcement for Digital Fabrication with Concrete
137. Mechtcherine Viktor, Mai (née Dressler) Inka, Empelmann Martin, Gehlen Christoph et al. (2021-09)
     Digital Concrete Construction by Means of Additive Processes:
     State of the Art and Research Needs
138. Benamara Abdeslam, Pierre Alexandre, Kaci Abdelhak, Mélinge Yannick (2021-05)
     Digital Printing of Mortar in Carrier-Liquid:
     Comparison of Approaches to Predict Print Stability
139. Mechtcherine Viktor (2021-04)
     Digital Building:
     3D Printing with Concrete
140. Li Chenshu, Zhou Xiaoyan, Liu Xingyu (2021-04)
     Integrating the Bio-Digital Aesthetic Value and Architecture Potential of Rapid-Liquid-Printed-Concrete 3D Printing Technology
141. Cho Seung, Kruger Jacques, Rooyen Algurnon, Zijl Gideon (2021-03)
     Rheology and Application of Buoyant Foam-Concrete for Digital Fabrication
142. Weng Yiwei, Mohamed Nisar, Lee Brian, Gan Nicole et al. (2021-02)
     Extracting BIM Information for Lattice Tool-Path-Planning in Digital Concrete Printing with Developed Dynamo Script:
     A Case Study
143. Mechtcherine Viktor, Buswell Richard, Kloft Harald, Bos Freek et al. (2021-02)
     Integrating Reinforcement in Digital Fabrication with Concrete:
     A Review and Classification Framework
144. Nguyen Vuong, Panda Biranchi, Zhang Guomin, Nguyen-Xuan Hung et al. (2021-01)
     Digital Design Computing and Modelling for 3D Concrete Printing
145. Singh P., Sreerag K. (2020-12)
     Additive Manufacturing Through Digital Concrete by Extrusion- and Non-Extrusion-Method
146. Bester Frederick, Heever Marchant, Kruger Jacques, Zijl Gideon (2020-11)
     Reinforcing Digitally Fabricated Concrete:
     A Systems Approach Review
147. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2020-10)
     Development of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction
148. Kruger Jacques, Zijl Gideon (2020-10)
     A Compendious Review on Lack-of-Fusion in Digital Concrete Fabrication
149. Graser Konrad, Baur Marco, Apolinarska Aleksandra, Dörfler Kathrin et al. (2020-09)
     DFAB House:
     A Comprehensive Demonstrator of Digital Fabrication in Architecture
150. He Rui, Li Mingkai, Gan Vincent, Ma Jun (2020-08)
     BIM-Enabled Computerized Design and Digital Fabrication of Industrialized Buildings:
     A Case Study
151. Wang Shian, Liu Chi, Zhang Guo, Luo Qi et al. (2020-08)
     Digital Planting:
     Fabrication of Integrated Concrete Green Wall via Additive Manufacturing
152. Cascone Paolo, Laddaga Maddalena, Forestiero Federico (2020-07)
     Digital Construction:
     3D Printing for Performative Houses
153. Pastore Tommaso, Menna Costantino, Asprone Domenico (2020-07)
     Combining Multiple Loads in a Topology-Optimization Framework for Digitally Fabricated Concrete Structures
154. Kurt Sibel, Atalay Yiğit, Aydın Ozan, Avcıoğlu Berrak et al. (2020-07)
     Design of Energy-Efficient White Portland Cement Mortars for Digital Fabrication
155. Scheurer Martin, Dittel Gözdem, Gries Thomas (2020-07)
     Potential for the Integration of Continuous-Fiber-Based Reinforcements in Digital Concrete Production
156. Nematollahi Behzad, Bong Shin, Xia Ming, Sanjayan Jay (2020-07)
     Digital Fabrication of ‘Just-Add-Water’ Geopolymers:
     Effects of Curing Condition and Print-Time Interval
157. Varela Hugo, Barluenga Gonzalo, Palomar Irene (2020-07)
     Rheology Evaluation of Cement-Paste with Nano-Clay , Nano-Silica and Polymeric Admixtures for Digital Fabrication
158. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Wangler Timothy et al. (2020-07)
     ACDC:
     The Admixture-Controlled Digital Casting and Its Application to Thin-Folded Concrete Structures
159. Costa Eduardo, Shepherd Paul, Orr John, Ibell Tim et al. (2020-07)
     Automating Concrete Construction:
     Digital Design of Non-Prismatic Reinforced Concrete Beams
160. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Burger Joris et al. (2020-07)
     Aligned Inter-Layer Fiber-Reinforcement and Post-Tensioning as a Reinforcement-Strategy for Digital Fabrication
161. Bos Freek, Wolfs Robert, Salet Theo (2020-06)
     CCR Digital Concrete 2020 SI:
     Editorial
162. Buswell Richard, Silva Wilson, Bos Freek, Schipper Roel et al. (2020-05)
     A Process Classification Framework for Defining and Describing Digital Fabrication with Concrete
163. Lloret-Fritschi Ena, Wangler Timothy, Gebhard Lukas, Mata-Falcón Jaime et al. (2020-05)
     From Smart Dynamic Casting to a Growing Family of Digital Casting Systems
164. Reiter Lex, Wangler Timothy, Anton Ana-Maria, Flatt Robert (2020-05)
     Setting-on-Demand for Digital Concrete:
     Principles, Measurements, Chemistry, Validation
165. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2020-04)
     A Rheology-Based Quasi-Static Shape-Retention-Model for Digitally Fabricated Concrete
166. Menna Costantino, Mata-Falcón Jaime, Bos Freek, Vantyghem Gieljan et al. (2020-04)
     Opportunities and Challenges for Structural Engineering of Digitally Fabricated Concrete
167. Damme Henri (2020-04)
     Challenges and Opportunities for Concrete in the Digital Era
168. Kruger Jacques, Cho Seung, Zeranka Stephan, Vintila Cristian et al. (2019-12)
     3D Concrete Printer Parameter Optimization for High-Rate Digital Construction Avoiding Plastic Collapse
169. Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schneider Kai et al. (2019-11)
     New Carbon Fiber Reinforcement for Digital, Automated Concrete Construction
170. Paolini Alexander, Kollmannsberger Stefan, Rank Ernst (2019-10)
     Additive Manufacturing in Construction:
     A Review on Processes, Applications, and Digital Planning Methods
171. Szabó Anna, Lloret-Fritschi Ena, Reiter Lex, Gramazio Fabio et al. (2019-09)
     Revisiting Folded Forms with Digital Fabrication
172. Bong Shin, Nematollahi Behzad, Xia Ming, Nazari Ali et al. (2019-09)
     Properties of 3D Printable Ductile Fiber-Reinforced Geopolymer Composite for Digital Construction Applications
173. Arunothayan Arun, Nematollahi Behzad, Bong Shin, Ranade Ravi et al. (2019-09)
     Hardened Properties of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction Applications
174. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-09)
     Enhancing Strength of Powder-Based 3D Printed Geopolymers for Digital Construction Applications
175. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2019-09)
     Processing of Set-on-Demand Solutions for Digital Fabrication in Architecture
176. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-09)
     Post-Processing Techniques to Enhance Strength of Portland Cement Mortar Digitally Fabricated Using Powder-Based 3D Printing Process
177. Das Arnesh, Reiter Lex, Wangler Timothy, Flatt Robert (2019-09)
     Hydration-Control of Ternary Cements for Digital Fabrication with Concrete
178. Jendele Libor, Červenka Jan, Vaitová Michaela (2019-09)
     FEM Modelling of Digitally Printed Concrete Structures Using 3D-Extrusion
179. Mechtcherine Viktor, Nerella Venkatesh, Will Frank, Näther Mathias et al. (2019-08)
     Large-Scale Digital Concrete Construction:
     CONPrint3D Concept for On-Site, Monolithic 3D Printing
180. Zhu Binrong, Pan Jinlong, Nematollahi Behzad, Zhou Zhenxin et al. (2019-07)
     Development of 3D Printable Engineered Cementitious Composites with Ultra-High Tensile Ductility for Digital Construction
181. Markin Slava, Nerella Venkatesh, Schröfl Christof, Guseynova Gyunay et al. (2019-07)
     Material-Design and Performance-Evaluation of Foam-Concrete for Digital Fabrication
182. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-07)
     Post-processing Methods to Improve Strength of Particle-Bed 3D Printed Geopolymer for Digital Construction Applications
183. Wangler Timothy, Roussel Nicolas, Bos Freek, Salet Theo et al. (2019-06)
     Digital Concrete:
     A Review
184. Krause Martin, Otto Jens (2019-05)
     Digital Process Model for Concrete 3D Printing
185. Craveiro Flávio, Duarte José, Bártolo Helena, Bartolo Paulo (2019-04)
     Additive Manufacturing as an Enabling Technology for Digital Construction:
     A Perspective on Construction 4.0
186. Nematollahi Behzad, Xia Ming, Vijay Praful, Sanjayan Jay (2019-02)
     Properties of Extrusion-Based 3D Printable Geopolymers for Digital Construction Applications
187. Kaufhold Julia, Kohl Johannes, Nerella Venkatesh, Schröfl Christof et al. (2019-02)
     Wood-Based Support Material for Extrusion-Based Digital Construction
188. Panda Biranchi, Lim Jian, Tan Ming (2019-02)
     Mechanical Properties and Deformation Behavior of Early-Age Concrete in the Context of Digital Construction
189. Ham Namhyuk, Lee Sanghyo (2019-01)
     Project Benefits of Digital Fabrication in Irregular-Shaped Buildings
190. Panda Biranchi, Tan Ming (2018-11)
     Rheological Behavior of High-Volume Fly-Ash Mixtures Containing Micro-Silica for Digital Construction Application
191. Wangler Timothy (2018-11)
     Digital Concrete Processing:
     A Review
192. Nematollahi Behzad, Vijay Praful, Sanjayan Jay, Nazari Ali et al. (2018-11)
     Effect of Polypropylene Fiber Addition on Properties of Geopolymers Made by 3D Printing for Digital Construction
193. Agustí-Juan Isolda, Jipa Mihail-Andrei, Habert Guillaume (2018-11)
     Environmental Assessment of Multi-Functional Building Elements Constructed with Digital Fabrication Techniques
194. Nerella Venkatesh, Beigh Mirza, Fataei Shirin, Mechtcherine Viktor (2018-11)
     Strain-Based Approach for Measuring Structural Build-Up of Cement-Pastes in the Context of Digital Construction
195. Meibodi Mania, Jipa Mihail-Andrei, Giesecke Rena, Shammas Demetris et al. (2018-10)
     Smart Slab:
     Computational Design and Digital Fabrication of a Lightweight Concrete Slab
196. Nerella Venkatesh, Näther Mathias, Iqbal Arsalan, Butler Marko et al. (2018-09)
     In-Line Quantification of Extrudability of Cementitious Materials for Digital Construction
197. Chee Ryan, Tan Wei, Goh Wei, Amtsberg Felix et al. (2018-09)
     Concrete Fabrication by Digitally Controlled Injection
198. Martins Pedro, Campos Paulo, Nunes Sandra, Sousa José (2018-09)
     The Tectonics of Digitally Fabricated Concrete:
     A Case for Robotic Hot Wire-Cutting
199. Mechtcherine Viktor, Nerella Venkatesh, Ogura Hiroki, Grafe Jasmin et al. (2018-09)
     Alternative Reinforcements for Digital Concrete Construction
200. Stefanoni Matteo, Angst Ueli, Elsener Bernhard (2018-09)
     Corrosion Challenges and Opportunities in Digital Fabrication of Reinforced Concrete
201. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2018-09)
     Large-Scale Testing of Digitally Fabricated Concrete (DFC) Elements
202. Wangler Timothy, Flatt Robert (2018-09)
     Proceedings of the 1st RILEM International Conference on Concrete and Digital Fabrication:
     Correction
203. Mata-Falcón Jaime, Bischof Patrick, Kaufmann Walter (2018-09)
     Exploiting the Potential of Digital Fabrication for Sustainable and Economic Concrete Structures
204. Flatt Robert, Wangler Timothy (2018-08)
     Editorial for Special Issue on Digital Concrete
205. Schwartz Joseph (2018-07)
     Graphic Statics and Their Potential for Digital Design and Fabrication with Concrete
206. Herrmann Eric, Mainka Jeldrik, Lindemann Hendrik, Wirth Franz et al. (2018-07)
     Digitally Fabricated Innovative Concrete Structures
207. Nerella Venkatesh, Ogura Hiroki, Mechtcherine Viktor (2018-07)
     Incorporating Reinforcement into Digital Concrete Construction
208. Buchli Jonas, Giftthaler Markus, Kumar Nitish, Lussi Manuel et al. (2018-07)
     Digital In-Situ Fabrication:
     Challenges and Opportunities for Robotic In-Situ Fabrication in Architecture, Construction, and Beyond
209. Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2018-06)
     The Role of Early-Age Structural Build-Up in Digital Fabrication with Concrete
210. Asprone Domenico, Menna Costantino, Bos Freek, Salet Theo et al. (2018-06)
     Rethinking Reinforcement for Digital Fabrication with Concrete
211. Mechtcherine Viktor, Grafe Jasmin, Nerella Venkatesh, Spaniol Erik et al. (2018-05)
     3D Printed Steel-Reinforcement for Digital Concrete Construction:
     Manufacture, Mechanical Properties and Bond Behavior
212. Marchon Delphine, Kawashima Shiho, Bessaies-Bey Hela, Mantellato Sara et al. (2018-05)
     Hydration- and Rheology-Control of Concrete for Digital Fabrication:
     Potential Admixtures and Cement-Chemistry
213. Chee Ryan, Tan Wei, Goh Wei, Amtsberg Felix et al. (2018-05)
     Locally Differentiated Concrete by Digitally Controlled Injection
214. Scotto Fabio, Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias et al. (2018-05)
     Adaptive Control-System for Smart Dynamic Casting:
     Defining Fabrication-Informed Design-Tools and Process-Parameters in Digital Fabrication-Processes
215. Soto Borja, Agustí-Juan Isolda, Hunhevicz Jens, Joss Samuel et al. (2018-05)
     Productivity of Digital Fabrication in Construction:
     Cost and Time-Analysis of a Robotically Built Wall
216. Loveridge Russell, Coray Tanja (2017-04)
     Robots on Construction Sites:
     The Potential and Challenges of On-Site Digital Fabrication
217. Pawar Vijay, Stuart-Smith Robert, Scully Peter (2017-04)
     Toward Autonomous Architecture:
     The Convergence of Digital Design, Robotics, and the Built Environment
218. Agustí-Juan Isolda, Müller Florian, Hack Norman, Wangler Timothy et al. (2017-04)
     Potential Benefits of Digital Fabrication for Complex Structures:
     Environmental Assessment of a Robotically Fabricated Concrete Wall
219. Xu Jie, Ding Lieyun, Love Peter (2017-01)
     Digital Reproduction of Historical Building Ornamental Components:
     From 3D Scanning to 3D Printing
220. Agustí-Juan Isolda, Habert Guillaume (2016-11)
     Environmental Design Guidelines for Digital Fabrication
221. Wangler Timothy, Lloret-Fritschi Ena, Reiter Lex, Hack Norman et al. (2016-10)
     Digital Concrete:
     Opportunities and Challenges
222. Agustí-Juan Isolda, Habert Guillaume (2016-04)
     An Environmental Perspective on Digital Fabrication in Architecture and Construction
223. Duro-Royo Jorge, Mogas-Soldevila Laia, Oxman Neri (2015-06)
     Flow-Based Fabrication:
     An Integrated Computational Workflow for Design and Digital Additive Manufacturing of Multifunctional Heterogeneously Structured Objects
224. Martins Pedro, Sousa José (2014-09)
     Digital Fabrication Technology in Concrete Architecture
225. Keating Steven, Spielberg Nathan, Klein John, Oxman Neri (2014-05)
     A Compound Arm Approach to Digital Construction:
     A Mobile Large-Scale Platform for On-Site Sensing, Design, and Digital Fabrication
226. Lloret-Fritschi Ena, Shahab Amir, Linus Mettler, Flatt Robert et al. (2014-03)
     Complex Concrete Structures:
     Merging Existing Casting Techniques with Digital Fabrication
227. Helm Volker, Willmann Jan, Gramazio Fabio, Kohler Matthias (2013-11)
     In-Situ Robotic Fabrication:
     Advanced Digital Manufacturing Beyond the Laboratory
228. Keating Steven, Oxman Neri (2013-06)
     Compound Fabrication:
     A Multi-Functional Robotic Platform for Digital Design and Fabrication
229. Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias, Langenberg Silke (2013-05)
     Complex Concrete Constructions:
     Merging Existing Casting Techniques with Digital Fabrication
230. Braumann Johannes, Brell-Cokcan Sigrid (2012-12)
     Digital and Physical Tools for Industrial Robots in Architecture:
     Robotic Interaction and Interfaces
231. Kestelier Xavier, Buswell Richard (2009-10)
     A Digital Design Environment for Large-Scale Rapid Manufacturing