Skip to content

#state

Keywords by Co - Occurrence

  1. Ding Yao, Liu Yifan, Yang Bo, Liu Jiepeng et al. (2026-01)
    Application of Artificial Intelligence Technology in 3D Concrete Printing Quality Inspection and Control:
    A State-of-the-Art Review
  2. Baghdadi Abtin, Khanipour Raad Kian, Dörrie Robin, Kloft Harald (2025-12)
    Fabrication of Dry Connection Through Stamping and Milling of Green-State Concrete
  3. Akgümüş Fatih, Şahin Hatice, Mardani Ali (2025-10)
    Investigation of Waste Steel Fiber Usage Rate and Length Change on Some Fresh State Properties of 3D Printable Concrete Mixtures
  4. Ramirez Rodriguez Fatima, Ahmad Rafiq (2025-09)
    Sustainable Technology Advances for Additive Construction:
    A State-of-the-Art Review
  5. Ingle Vaibhav, Prem Prabhat (2025-07)
    Acoustic Emission Examination of 3D Printed Ultra-High Performance Concrete with and Without Coarse Aggregate Under Fresh and Hardened States
  6. Avşar Yunus, Uysal Mücteba, Akca Abdullah (2025-05)
    Improvement of 3D Printing Properties of MgO Derived Binders by CO2 Curing in Hardened State
  7. Over Derya, Ozbakan Nesil (2025-04)
    Effect of Recycled Aggregate Use on the Fresh State Properties of Limestone Calcined Clay Cement (LC3) Mortars
  8. Liu Chao, Li Xin, Wu Yiwen, Liu Huawei et al. (2025-03)
    Impact of External Loading on the Time-Dependent Evolution of 3D Printed Concrete with Recycled Sand in the Green State
  9. Gardan Julien, Hedjazi Lofti, Attajer Ali (2025-02)
    Additive Manufacturing in Construction:
    State of the Art and Emerging Trends in Civil Engineering
  10. Akkoyun Furkan, Günal Ayse (2025-02)
    The State of 3D Concrete Printing:
    Current Applications and Future Opportunities
  11. Silvestro Laura, Ribeiro Rodrigo, Navarrete Iván (2024-12)
    Advancements in Low Carbon-Emission Cements for 3D Printing:
    A State-of-the-Art Review
  12. Kruger Jacques, Zijl Gideon (2024-11)
    A Structural Engineering Perspective on Extrusion-Based 3D Concrete Printing:
    From Green to Solid State
  13. Murali Gunasekaran, Leong Sing (2024-11)
    Waste-Driven Construction:
    A State of the Art Review on the Integration of Waste in 3D Printed Concrete in Recent Researches for Sustainable Development
  14. Li Zhengrong, Xing Wenjing, Wang Heyu, Sun Jingting (2024-10)
    The Effect of Heterogeneous Geometry on Steady-State Heat Transfer in Extrusion-Based 3D Printed Structures
  15. Cai Jianguo, Wang Jingsong, Zhang Qian, Du Caixia et al. (2024-10)
    State of the Art of Mechanical Properties of 3D Printed Concrete
  16. Miranda Luiza, Lesage Karel, Schutter Geert, Roussel Nicolas (2024-09)
    Zone-Based Analysis of Layer Deformation in 3D Concrete Printing:
    Shoulder, Steady-State, and Foot Zones
  17. Auer Daniel, Bos Freek, Fischer Oliver (2024-09)
    3DCP.fyi:
    A Comprehensive Citation Network Graph on the State of the Art in 3D Concrete Printing
  18. Dörrie Robin, Kloft Harald, Sawicki Bartłomiej, Freund Niklas et al. (2024-09)
    Automated Reinforcement Integration in Shotcrete 3D Printing Through Green State Milling
  19. Ma Liangzhu, Yin Deshun, Ren Jiangtao, Tian Mingyuan et al. (2024-09)
    An Effective Thixotropic Structural-Dynamics Rheological-Model for 3D Printed Concrete Materials in the Flow-State
  20. Abbasnejad Behzad, Soltani Sahar, Karamoozian Amirhossein, Gu Ning (2024-08)
    A Systematic Literature Review on the Integration of Industry 4.0 Technologies in Sustainability Improvement of Transportation Construction Projects:
    State of the Art and Future Directions
  21. Hasani Alireza, Dorafshan Sattar (2024-06)
    Transforming Construction?:
    Evaluation of the State of Structural 3D Concrete Printing in Research and Practice
  22. Yan Kang-Tai, Wang Xian-Peng, Ding Yao, Li Lingzhi et al. (2024-06)
    3D Printed LC3-Based Lightweight Engineered Cementitious Composites:
    Fresh State, Hardened Material-Properties and Beam-Performance
  23. Kompella Sriram, Marcucci Andrea, Monte Francesco, Levi Marinella et al. (2024-04)
    Fracture Behavior of Three-Dimensional-Printable Cementitious Mortars in Very Early-Ages and Hardened States
  24. Jia Lutao, Jia Zijian, Zhang Zedi, Tang Zhenzhong et al. (2024-02)
    Effect of Recycled Brick-Powder with Various Particle-Features on Early-Age Hydration, Water-State, and Rheological Properties of Blended Cement-Paste in the Context of 3D Printing
  25. Dulaj Albanela, Salet Theo, Lucas Sandra (2024-01)
    A Study of the Effects of MWCNTs on the Fresh and Hardened State Properties of 3D Printable Concrete
  26. Wan Zhi, Xu Yading, He Shan, Schlangen Erik et al. (2024-01)
    The Use of Additive Manufacturing in Self-Healing Cementitious Materials:
    A State of the Art Review
  27. Mai (née Dressler) Inka, Herding Friedrich, Lowke Dirk (2023-12)
    Effect of Grain-Size and Layer-Thickness on Hardened State Properties in Selective Cement-Activation
  28. Yin Xunzhi, Guo Chong, Sun Bo, Chen Honggang et al. (2023-09)
    The State of the Art in Digital Construction of Clay Buildings:
    Reviews of Existing Practices and Recommendations for Future Development
  29. Liu Dawei, Zhang Zhigang, Zhang Xiaoyue, Chen Zhaohui (2023-09)
    3D Printing Concrete Structures:
    State of the Art, Challenges, and Opportunities
  30. Liu Zhenbang, Li Mingyang, Quah Tan, Wong Teck et al. (2023-09)
    Comprehensive Investigations on the Relationship Between the 3D Concrete Printing Failure Criterion and Properties of Fresh-State Cementitious Materials
  31. Overmeir Anne, Šavija Branko, Bos Freek, Schlangen Erik (2023-08)
    3D Printable Strain-Hardening Cementitious Composites (3DP-SHCC):
    Tailoring Fresh and Hardened State Properties
  32. Ibrahim Kamoru, Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-03)
    Influence of Effective Micro-Organisms on the Rheology and Fresh State Properties of SCMs-Based Concrete for Digital Fabrication
  33. Şahin Hatice, Mardani Ali (2023-02)
    Mechanical Properties, Durability Performance and Inter-Layer Adhesion of 3DPC Mixtures:
    A State‐of‐the‐art Review
  34. Teixeira João, Schaefer Cecília, Rangel Bárbara, Maia Lino et al. (2022-11)
    A Road Map to Find in 3D Printing a New Design Plasticity for Construction:
    The State of Art
  35. Kompella Sriram, Monte Francesco, Bassani Andrea, Guanziroli Stefano et al. (2022-09)
    A Comparative Study of Hardened-State Mechanical Properties of 3D Printed and Conventionally Cast Fiber-Reinforced Concrete
  36. Diab Zeinab, Do Duc, Rémond Sébastien, Hoxha Dashnor (2022-06)
    Uncertainty Quantification of Concrete Properties at Fresh State and Stability-Analysis of the 3D Printing Process by Stochastic Approach
  37. Mai (née Dressler) Inka, Herding Friedrich, Lowke Dirk (2022-06)
    Evaluating the Effect of Methyl-Cellulose on Hardened State Properties in Selective Cement-Activation
  38. Böhler David, Mai (née Dressler) Inka, Freund Niklas, Lachmayer Lukas et al. (2022-06)
    Influence of Material and Process Parameters on Hardened State Properties of Shotcrete 3D Printed Elements
  39. Demont Léo, Charrier Malo, Margerit Pierre, Ducoulombier Nicolas et al. (2022-06)
    Flow-Based Pultrusion of Anisotropic Concrete:
    Mechanical Properties at Hardened State
  40. Kolawole John, Becker Daniel, Xu Jie, Dobrzanski James et al. (2022-06)
    Selected Test-Methods for Assessing Fresh and Plastic-State 3D Concrete Printing-Materials
  41. Liu Chao, Chen Yuning, Xiong Yuanliang, Jia Lutao et al. (2022-06)
    Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Buildability of 3D Printing Foam-Concrete:
    From Water State and Flocculation Point of View
  42. Biricik Öznur, Mardani Ali (2022-05)
    Parameters Affecting Thixotropic Behavior of Self-Compacting Concrete and 3D Printable Concrete:
    A State of the Art Review
  43. Saruhan Vedat, Keskinateş Muhammer, Felekoğlu Burak (2022-04)
    A Comprehensive Review on Fresh State Rheological Properties of Extrusion-Mortars Designed for 3D Printing Applications
  44. Jipa Mihail-Andrei, Dillenburger Benjamin (2022-04)
    3D Printed Formwork for Concrete:
    State of the Art, Opportunities, Challenges, and Applications
  45. Rollakanti Chiranjeevi, Prasad C. (2022-04)
    Applications, Performance, Challenges and Current Progress of 3D Concrete Printing Technologies as the Future of Sustainable Construction:
    A State of the Art Review
  46. Ulubeyli Serdar (2022-03)
    Lunar Shelter Construction Issues:
    The State of the Art Towards 3D Printing Technologies
  47. Heidarnezhad Fatemeh, Zhang Qian (2022-01)
    Shotcrete-Based 3D Concrete Printing:
    State of Art, Challenges, and Opportunities
  48. Putten Jolien, Nerella Venkatesh, Mechtcherine Viktor, Hondt Mélody et al. (2022-01)
    Properties and Testing of Printed Cement-Based Materials in Hardened State
  49. Wu Zhengyu, Memari Ali, Duarte José (2022-01)
    State of the Art Review of Reinforcement-Strategies and Technologies for 3D Printing of Concrete
  50. Şahin Hatice, Mardani Ali (2021-12)
    Assessment of Materials, Design Parameters and Some Properties of 3D Printing Concrete Mixtures:
    A State of the Art Review
  51. Rennen Philipp, Khader Noor, Hack Norman, Kloft Harald (2021-11)
    A Hybrid Additive Manufacturing Approach:
    Combining Additive Manufacturing and Green-State Concrete Milling to Create a Functionally Integrated Loadbearing Concrete Panel System
  52. Sesetti Harika, Lalithya Muthina, Kumar Pala (2021-10)
    3D Concrete Printing in Construction Industry:
    A State of the Art
  53. Rollakanti Chiranjeevi, Prasad C., Joe Adams (2021-10)
    Digital Concrete for Sustainable Construction Industry:
    A State of the Art Review
  54. Prasad C. (2021-10)
    3D Concrete Printing Technology Current Progress and Future Perspective:
    A State of the Art Review
  55. Dobrzanski James, Buswell Richard, Cavalaro Sergio, Kinnell Peter et al. (2021-09)
    Milling a Cement-Based 3D Printable Mortar in Its Green State Using a Ball-Nosed Cutter
  56. Mechtcherine Viktor, Mai (née Dressler) Inka, Empelmann Martin, Gehlen Christoph et al. (2021-09)
    Digital Concrete Construction by Means of Additive Processes:
    State of the Art and Research Needs
  57. Pan Yifan, Zhang Yulu, Zhang Dakang, Song Yuying (2021-05)
    3D Printing in Construction:
    State of the Art and Applications
  58. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2020-10)
    Extrusion-Based Concrete 3D Printing from a Material Perspective:
    A State of the Art Review
  59. Jacquet Yohan, Picandet Vincent, Rangeard Damien, Perrot Arnaud (2020-07)
    Gravity-Driven Tests to Assess Mechanical Properties of Printable Cement-Based Materials at Fresh State
  60. Falliano Devid, Domenico Dario, Ricciardi Giuseppe, Gugliandolo Ernesto (2020-04)
    3D Printable Lightweight Foamed Concrete and Comparison with Classical Foamed Concrete in Terms of Fresh State Properties and Mechanical Strength
  61. Bhardwaj Abhinav, Zou Na, Pei Zhijian (2018-06)
    Additive Manufacturing for Civil Infrastructure Design and Construction:
    Current State and Gaps
  62. Mechtcherine Viktor, Nerella Venkatesh (2018-02)
    3D Printing with Concrete:
    State-of-the-Art, Trends, Challenges
  63. Labonnote Nathalie, Rønnquist Anders, Manum Bendik, Rüther Petra (2016-09)
    Additive Construction:
    State of the Art, Challenges and Opportunities