Skip to content

#beam

Keywords by Co - Occurrence

  1. Sawicki Bartłomiej, Chen Zhuo, Leusmann Thorsten, Kloft Harald (2026-01)
    Shotcrete 3D Printed Reinforced Concrete Beam:
    Design, Testing, and Comparison Against Conventional Cast Reinforced Concrete Solution
  2. Kiyani Muhammad, Kamal Muhammad, Hussain Syed, Emaan Rajja et al. (2026-01)
    A Novel Arch Infill for 3D Concrete Printed Beams:
    A Comparative Study of Flexural Performance Against Truss and Solid Designs
  3. Pal Biswajit, Chourasia Ajay, Tomar Milan, Pradeep Kumar (2026-01)
    Influence of Interfilament Bond Characteristics on the Load–Deflection Behavior of 3D Printed Beam:
    A Numerical Study
  4. Zhang Xiaoyue, Chen Zhengren, Zhou Xinting, Li Zheng et al. (2026-01)
    Experimental Investigation on the Mechanical Performance of 3D-Printed Concrete-Glued Laminated Timber Composite Beams
  5. Cong Long-Yu, Zhang Fang, Qian Yong-Jiu (2025-12)
    Flexural Behavior Investigation of RC Beams with FRP-Reinforced 3D-Printed ECC Permanent Formwork
  6. Liang Xiangzhou, Li Jinqian, Li Ziwei, Wang Qiang (2025-12)
    Experimental and Analytical Investigation of the Shear Behavior of the Developed BFRP Reinforced 3D Printed Composite Beams with U-Shaped Seawater Sea-Sand ECC Formwork
  7. Deng North, Wang Sizhe, Li Mingyang, Wang Xiangyu et al. (2025-12)
    A Perforated Strip-Based Three-Dimensional Reinforcement Strategy for 3D Printed Concrete:
    Flexural Testing of Beams as a Proof of Concept
  8. Korol Ewelina, Jenta Arkadiusz, Chaudhari Ojas, Wójcik Michal (2025-11)
    Experimental Investigation of Concrete Beams Under Bending, Manufactured with 3D Additive Printing Technology
  9. Yavartanoo Fahimeh, Bolhassani Damon, Akbarzadeh Masoud, Ororbia Maximilian et al. (2025-10)
    Advanced Finite Element Modeling of 3D-Printed Post-Tensioned Concrete Beams with Experimental Validation
  10. Drumond Pedro, Milagres Geysiane, Parassen Paloma, Santos Luana et al. (2025-10)
    Assessment of Printing Direction in Flexural Tests of 3D Printed Reinforced Concrete Beams
  11. Seepim Sirakan, Dhanasekara Chamil, Tanapornraweekit Ganchai, Tangtermsirikul Somnuk et al. (2025-10)
    Effects of Printing Interval Time on the Structural Performance of 3D-Printed Beams Under Four-Point Bending Loads
  12. Wang Li, Fan Haichen, Wang Qiang, Bai Gang et al. (2025-09)
    Design Method and Force Transmission Mechanism of 3D Printed Concrete Truss Beams Reinforced with 3D Conical Reinforcement
  13. Bai Gang, Wang Li, Li Zhijian, Qu Yao et al. (2025-09)
    Integrating Prestress into 3D Printed Ultra-High Performance Concrete Composite Beams for Superior Flexural Performance
  14. Sahu Akshay, Sharma Deepak, Panda Biranchi (2025-09)
    Tailoring Topology-Optimized Lightweight Concrete Beam Design for Additive Manufacturing
  15. Mak Bunleang, Kim Tae, Dong Won-Jun, Shim Chang (2025-08)
    Crack Width Investigation of Reinforced Concrete Beam with 3D Concrete Printed Formwork Using Modified Parameters
  16. Lin Manfang, Ding Yao, Yu Fan, Li Lingzhi et al. (2025-08)
    Synergistic Strengthening of 3D‑printed ECC Beams Through Steel-Wire Mesh and Interfaces Treatments
  17. Santhosh S., Raphael Benny, Santhanam Manu (2025-07)
    Exploration of Sustainable Beam Design Using Voronoi Patterns in Concrete 3D Printing
  18. Saelens Lien, Tittelboom Kim, Wan-Wendner Roman, Caspeele Robby (2025-07)
    Experimental and Numerical Quantification of the Structural Capacity of Hybrid 3D Printed and Cast Concrete Beams After Topology Optimization
  19. Alnemrawi Bara'a, Rousan Rajai, Abdalla Khairedin, Lagaros Nikos (2025-06)
    Evaluating the Structural Performance of 3D Printed FRCC Beams with Anchoring Reinforcement:
    Material, Geometry, and Loading Perspectives
  20. Haar Bjorn, Kruger Jacques, Zijl Gideon (2025-06)
    3D Printed Concrete Pinned Beam-Column Connection Development
  21. Saelens Lien, Tittelboom Kim, Caspeele Robby, Wan-Wendner Roman (2025-06)
    Experimental Analysis of the Structural Behavior of Hybrid Concrete 3D Printed-Cast Beam Systems
  22. Ye Huzi, He Qianpeng, Ping Pengxin, Pan Jinlong et al. (2025-06)
    Anisotropic Flexural Behavior and Energy Absorption of 3D Printed Engineered Cementitious Composites (3DP-ECC) Beams Under Low-Velocity Impact
  23. Mostert Jean-Pierre, Kruger Jacques (2025-06)
    Improving Shear and Flexural Performance of Macroscale 3D Printed Concrete Beams Through Filament Interlocking
  24. Li Shuai, Liu Junli, Cheng Chi-Tsun, Xuan Hung et al. (2025-06)
    Design and Performance of 3D Printed Bouligand Steel Fiber-Reinforced Cementitious Composite Curved Beams
  25. Kim Tae, Oh Sangwoo, Lee Jinsuk, Dong Won-Jun et al. (2025-05)
    Effects of 3D-Printed Concrete Permanent Formwork on the Flexural Behavior of Reinforced Concrete Beams:
    Experimental and Analytical Investigations
  26. Santhosh S., Raphael Benny, Santhanam Manu (2025-05)
    Concrete 3D Printing of Shape-Optimized Lattice Beams Incorporating Nature-Inspired Patterns
  27. Liu Xingzi, Xu Jie, Dobrzanski James, Kolawole John et al. (2025-05)
    Factors Affecting the Flexural Performance of Reinforced 3D Printed Concrete Beams
  28. Yang Guojun, Weng Yiwei, Tian Jiefu, Yang Zhenjun (2025-05)
    3D Printing Towards Cost-Effective Design of Composite UHPFRC Beams:
    Effects of Fiber Distribution and Orientation on Flexural Performances and Failure Mode Transition
  29. Hu Xiangcheng, Shazad Qamar, Li Fangyuan (2025-04)
    Influence of the Shear Span Ratio on the Shear Performance of 3D-Printed Concrete Beams Without Web Reinforcement
  30. Ghodke Swapnil, Chowdhury Shubhankar, Singh Bhupinder (2025-04)
    Characterising Flexural Behaviour of Coarse Aggregate-Based 3D Printed Concrete Beams Using Acoustic Emission Technique
  31. Kunieda Minoru, To Shunya, Kato Tatsuyoshi, Miyajima Akira (2025-04)
    Failure Behavior of RC Beams by Means of 3D Concrete Printing
  32. Salaimanimagudam M., Jayaprakash Jaganathan (2025-04)
    Synergistic Potential of Topology Optimization and Lattice Structures in Concrete 3D Printed Beams
  33. Wang Qiang, Yang Wenwei, Wang Li, Bai Gang et al. (2025-03)
    Reinforcement Design and Structural Performance for the Topology Optimized 3D Printed Concrete Truss Beams
  34. Zhu Binrong, Zhang Yuhang, Ye Huzi, Wei Yang et al. (2025-03)
    Low-Velocity Impact Performance of Biomimetic 3D Printed Engineered Cementitious Composites Beams
  35. Yu Jie, Teng Fei, Ye Junhong, Zhang Dong et al. (2025-01)
    Size-Dependent Model to Predict the Flexural-Strength of 3D Printed Engineered Cementitious Composites Beams
  36. Fernand Muhirwa, Yang Zhenjun (2025-01)
    Structural and Microstructural Behavior of Novel 3DP-UHPFRC Beam with Discrete Steel-Fibers and Steel-FRP Composite Bar
  37. Wang Hailong, Shen Junyi, Sun Xiaoyan, Dong Weiwei et al. (2024-12)
    Numerical Investigation on Shear Behavior of Reinforced Concrete Beam with 3D Printed Concrete Permanent Formwork
  38. Lin Manfang, Yu Kequan (2024-11)
    A Rapid Reinforcement-Technique Using FRP and Steel-Wire Mesh in 3D Printed ECC Beams
  39. Lin Manfang, Li Lingzhi, Jiang Fangming, Ding Yao et al. (2024-11)
    Automated Reinforcement of 3D Printed Engineered Cementitious Composite Beams
  40. Rodriguez Fabian, Moini Mohamadreza, Agrawal Shubham, Williams Christopher et al. (2024-10)
    Mechanical Response of Small-Scale 3D Printed Steel-Mortar Composite Beams
  41. Park Keunhyoung, Memari Ali, Hojati Maryam, Radlińska Aleksandra et al. (2024-10)
    Effects of Anisotropic Mechanical Behavior on Nominal Moment Capability of 3D Printed Concrete Beam with Reinforcement
  42. Subramaniam Kolluru, Paritala Spandana, Kulkarni Omkar, Thakur Manideep (2024-09)
    Fracture in 3D Printed Concrete Beams:
    Deflection and Penetration of Impinging Cracks at Layer Interfaces
  43. Asaf Ofer, Bentur Arnon, Amir Oded, Larianovsky Pavel et al. (2024-09)
    A 3D Printing Platform for Design and Manufacturing of Multi-Functional Cementitious Construction Components and Its Validation for a Post-Tensioned Beam
  44. Wang Qiang, Yang Wenwei, Wang Li, Zhang Dan et al. (2024-09)
    Flexural Performance of the Integrated Steel-Truss-Reinforced 3D Printed Concrete Beams:
    Experimental and Numerical Analysis
  45. Ogura Hiroki, Hara Koichiro, Yamamoto Shinya, Abe Hiroyuki (2024-09)
    Flexural Performance of Fiber-Reinforced 3D Printed Concrete Beams with Axial Rebar
  46. Hojati Maryam, Sedghi Reza, Li Zhanzhao, Memari Ali et al. (2024-09)
    Flexural Strength of 3D Printed Concrete Beams:
    Exploring Barbed-Wire Reinforcement and Cross-Sectional Geometry
  47. Qian Shunzhi, Zhao Huanyu, Meng Dan (2024-09)
    Numerical Study of Concrete Beams with 3D Printed Strain-Hardening Cementitious Composites (SHCC)
  48. Kobayashi Noriyuki, Asakawa Tomoya, Nishiwaki Tomoya, Egawa Ryo et al. (2024-09)
    An Automated Pin Insertion Method for 3DCP and Its Reinforcement Effects on Beam Specimens
  49. Yu Jie, Weng Yiwei, Teng Fei, Ye Junhong et al. (2024-09)
    Prediction of the Flexural Strength of 3D Printed SHCC Beams Based on a Stochastic Size-Dependent Model
  50. Chai Hua, Ororbia Maximilian, Zhi Yefan, Welch Ryan et al. (2024-08)
    Design Approach for a Post-Tensioned Funicular Concrete Beam
  51. Bolhassani Damon, Yavartanoo Fahimeh, Tapia Javier, Akbarzadeh Masoud et al. (2024-08)
    The Effect of Post-Tensioning on the Behavior of Small-Scale 3D Printed Concrete Beams
  52. Ororbia Maximilian, Chai Hua, Zhi Yefan, Vakhshouri Pouria et al. (2024-08)
    Experimental Study of a Funicular Concrete Beam Prototype
  53. Li Xiaoteng, Newlands Moray, Jones Rod (2024-08)
    Performance of a Multi-Layer Aligned Steel-Fiber-Reinforced Concrete Beam:
    A Preliminary Investigation Towards 3D Printing
  54. Qiu Minghong, Qian Ye, Sun Yan, Leung Christopher (2024-07)
    Flexural Performance of Concrete Beams via 3D Printing Stay-in-Place Formwork Followed by Casting of Normal Concrete
  55. Jiang Fangming, Lin Manfang, Yu Kequan (2024-07)
    Mechanical Properties of 3D Printed ECC Beams Reinforced with FRP Mesh
  56. Zhang Xiaoyue, Huang Wanru, Chen Zhaohui (2024-07)
    Mechanical Behavior Investigation for the Timber-UHPC Shear Connector in 3D Printed Concrete-Based Composite Beam
  57. Bai Gang, Guan Jingyuan, Wang Li, Li Zhijian et al. (2024-07)
    Bending Performance of 3D Printed Ultra-High-Performance Concrete Composite Beams
  58. Salaimanimagudam M., Jayaprakash Jaganathan (2024-06)
    Optimal Selection of Cable-Reinforcement for Concrete 3D Printed Lattice-Beam
  59. Yan Kang-Tai, Wang Xian-Peng, Ding Yao, Li Lingzhi et al. (2024-06)
    3D Printed LC3-Based Lightweight Engineered Cementitious Composites:
    Fresh State, Hardened Material-Properties and Beam-Performance
  60. Bai Meiyan, Xiao Jianzhuang, Wu Yuching, Ding Tao (2024-05)
    Experimental and Numerical Study on the Flexural Behavior of 3D Printed Composite Beams with U-Shaped ECC Formwork
  61. Qiu Minghong, Qian Ye, Dai Jian-Guo (2024-05)
    Enhancing the Flexural Performance of Concrete Beams with 3D Printed UHP-SHCC Permanent Formwork via Graded Fiber Volume Fraction
  62. Coward Andy, Forsberg Torben (2024-04)
    Reconstruction of a Ukrainian Road Bridge by Use of 3D Printed minimass™ Beams
  63. Haar Bjorn, Kruger Jacques, Zijl Gideon (2024-04)
    Off-Site 3D Printed Concrete Beam Design and Fabrication
  64. Pan Jinlong, Ping Pengxin, Ding Boyin, Zhu Binrong et al. (2024-03)
    Impact Behavior of 3D Printed Fiber-Reinforced Cementitious Composite Beams
  65. Skibicki Szymon, Szewczyk Piotr, Majewska Julia, Sibera Daniel et al. (2024-03)
    The Effect of Inter-Layer Adhesion on Stress-Distribution in 3D Printed Beam Elements
  66. Ivaniuk Egor, Mechtcherine Viktor (2024-03)
    Approach for Production of Textile-Reinforced Beams and Slabs Using Three-Dimensional Concrete Printing
  67. Silva Guido, Quispe Axcel, Baldoceda Jordan, Kim Suyeon et al. (2024-02)
    Additive Construction of Concrete Deep Beams Using Low-Cost Characterization Methods and FEM-Based Topological Optimization
  68. Pham Thi, Trinh Duy, Do Trong, Huang Jie (2023-12)
    Flexural Behavior of Printed Concrete Wide Beams with Dispersed Fibers-Reinforced
  69. Maitenaz Sébastien, Mesnil Romain, Féraille Adélaïde, Caron Jean-François (2023-12)
    Materialising Structural Optimization of Reinforced Concrete Beams Through Digital Fabrication
  70. Coward Andy, Sørensen Jesper (2023-12)
    3D Printed Concrete Beams as Optimised Load Carrying Structural Elements:
    The Minimass Beam
  71. Wu Yuching, Chen Huaikun, Zhi Peng, Zhu Peng et al. (2023-12)
    Effect of 3D Printing Geometrical Monocline on Behaviors of Curved Timoshenko Beams Based on Isogeometric Analyses
  72. Wu Hao, Li Yu, Xie Xingje, Gao Xiaofan et al. (2023-11)
    Structural Performance-Based 3D Concrete Printing for an Efficient Concrete Beam
  73. Liu Qiong, Cheng Shengbo, Sun Chang, Chen Kailun et al. (2023-11)
    Steel-Cable Bonding in Fresh Mortar and 3D Printed Beam Flexural Behavior
  74. Li Zhuming, Aslani Farhad (2023-10)
    Performance of 3D Printed Beams and Slabs Using Self-Sensing Cementitious Composites and DIC Method
  75. Coward Andy, Sørensen Jesper (2023-09)
    MINIMASS:
    A New Approach for Low-Carbon, Low-Cost 3D Printed Concrete Beams
  76. Bong Shin, Nematollahi Behzad, Mechtcherine Viktor, Li Victor et al. (2023-09)
    3D Printed Engineered, Strain-Hardening Geopolymer Composite as Permanent Formwork for Construction of Reinforced Concrete Beam
  77. Ingle Vaibhav, Prem Prabhat, Ramamurthy Vignesh, Ravichandran Darssni (2023-09)
    Acoustic Emission Characterization of 3D Printed Ultra-High-Performance Concrete Beams Under Bending
  78. Ramamurthy Vignesh, Prem Prabhat, Ingle Vaibhav, Giridhar Greeshma (2023-09)
    Fracture Characterization of 3D Printed Ultra-High-Performance Fiber Concrete Beams Using Acoustic Emission
  79. Breseghello Luca, Hajikarimian Hamed, Jørgensen Henrik, Naboni Roberto (2023-07)
    3DLightBeam+:
    Design, Simulation, and Testing of Carbon-Efficient Reinforced 3D Concrete Printed Beams
  80. Alzarrad Ammar, Song Siyuan, Hatamleh Muhammad, Awolusi Ibukun et al. (2023-06)
    Guideline for Automated Construction of Reinforced Concrete Beams Using 3D Printing and BIM
  81. Mu Ru, Mei Shaolin, Wang Xiaowei, Chen Xiangshang et al. (2023-06)
    Mechanical Properties of a 3D Printed SFRC Beam with Steel-Fiber-Distribution Adaptive to Tensile Stress
  82. Pham Thi, Trinh Duy, Nguyen Thi, Do Trong et al. (2023-06)
    Study on Flexural Behavior of Printed Concrete Wide Beams Using Polypropylene-Fibers
  83. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2023-05)
    Wet Joint Performance of 3D Printed Concrete Beam Segments Under Flexural Loading
  84. Budiman Franky, Chandra Jimmy, Halim Alvin, Pudjisuryadi Pamuda (2023-04)
    Flexural and Shear Behavior of 3D Printed Reinforced Concrete Beams:
    An Experimental Study
  85. Zbyszyński Wojciech, Pietras Daniel, Sadowski Tomasz (2023-04)
    Data-Image-Correlation-Analysis of the Destruction-Process of 3D Printable Layered Beams Subjected to the Three-Point Bending Process
  86. Liu Haoran, Xiao Jianzhuang, Ding Tao (2023-03)
    Flexural Performance of 3D Printed Composite Beams with ECC and Recycled Fine Aggregate Concrete:
    Experimental and Numerical Analysis
  87. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2023-02)
    Parametric Modelling of 3D Printed Concrete Segmented Beams with Rebars Under Bending Moments
  88. Kloft Harald, Schmitz Linus, Müller Christoph, Laghi Vittoria et al. (2023-01)
    Experimental Application of Robotic Wire and Arc Additive Manufacturing-Technique for Strengthening the I-Beam Profiles
  89. Wang Lining, Aslani Farhad (2022-11)
    Structural Performance of Reinforced Concrete Beams with 3D Printed Cement-Based Sensor Embedded and Self-Sensing Cementitious Composites
  90. Baghdadi Abtin, Dörrie Robin, Kloft Harald (2022-09)
    Optimization of Building Floor Beam Layout by Optimization Algorithms Regarding the Concrete Printing Techniques
  91. Saelens Lien, Tittelboom Kim, Caspeele Robby, Wan-Wendner Roman (2022-09)
    Topology-Optimization of Structural Beam Systems considering 3D Concrete Printing Technology-Constraints
  92. Shkundalova Olena, Molkens Tom, Claßen Martin, Rossi Barbara (2022-09)
    Characterization of 3D Printed Concrete Beams After Exposure to High Temperature
  93. Menna Costantino, Esposito Laura (2022-06)
    Flexural Behavior of Steel-Reinforced Topology-Optimised Beams Fabricated by 3D Concrete Printing
  94. Gislason Styrmir, Bruhn Simon, Breseghello Luca, Sen Burak et al. (2022-06)
    Porous 3D Printed Concrete Beams Show an Environmental Promise:
    A Cradle-to-Grave Comparative Life Cycle Assessment
  95. Xiao Yinan, Hack Norman, Kloft Harald (2022-06)
    Digital Structural Design and Shotcrete 3D Printing-Strategies for Lightweight Reinforced Concrete Beam-Grid Structures
  96. Shkundalova Olena, Molkens Tom, Rossi Barbara, Claßen Martin (2022-06)
    Testing 3D Printed Reinforced Concrete Beams
  97. Cai Jingming, Sheng Zhaoliang, Wang Xiaoyi, Fang Yizhi et al. (2021-12)
    Effect of Reinforcement-Configurations on the Flexural Behaviors of 3D Printed Fiber-Reinforced Cementitious Composite Beams
  98. Nguyen Vuong, Choudhry Niranjan, Panda Biranchi, Nguyen-Xuan Hung et al. (2021-12)
    Performance of Concrete Beam Reinforced with 3D Printed Bio-Inspired Primitive Scaffold Subjected to Three-Point Bending
  99. Nair Sooraj, Tripathi Avinaya, Neithalath Narayanan (2021-09)
    Examining Layer-Height Effects on the Flexural and Fracture Response of Plain and Fiber-Reinforced 3D Printed Beams
  100. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2021-04)
    Structural Behavior of 3D Printed Concrete Beams with Various Reinforcement-Strategies
  101. Zhu Binrong, Pan Jinlong, Zhou Zhenxin, Cai Jingming (2021-04)
    Mechanical Properties of Engineered Cementitious Composites Beams Fabricated by Extrusion-Based 3D
  102. Pudjisuryadi Pamuda, Antoni Antoni, Chandra Jimmy (2020-09)
    Review on 3D Printed Concrete as Structural Beam Members
  103. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2020-08)
    Experimental Investigation of Reinforcement-Strategies for Concrete-Extrusion 3D Printed Beams
  104. Liu Yan, Jewett Jackson, Carstensen Josephine (2020-07)
    Experimental Investigation of Topology-Optimized Deep Reinforced Concrete Beams with Reduced Concrete Volume
  105. Wang Weiqiang, Konstantinidis Nikolaos, Austin Simon, Buswell Richard et al. (2020-07)
    Flexural Behavior of AR-Glass-Textile-Reinforced 3D Printed Concrete Beams
  106. Maitenaz Sébastien, Mesnil Romain, Onfroy Paul, Metge Nicolas et al. (2020-07)
    Sustainable Reinforced Concrete Beams:
    Mechanical Optimization and 3D Printed Formwork
  107. Costa Eduardo, Shepherd Paul, Orr John, Ibell Tim et al. (2020-07)
    Automating Concrete Construction:
    Digital Design of Non-Prismatic Reinforced Concrete Beams
  108. Park Keunhyoung, Memari Ali, Hojati Maryam, Zahabi Mehrzad et al. (2020-03)
    Experimental Testing and Finite Element Modeling of 3D Printed Reinforced Concrete Beams
  109. Chaar Ghassan, Stynoski Peter, Banko Marion (2018-11)
    Structural Behavior of Layer-Printed Reinforced Concrete Beams
  110. Burroughs Jedadiah, Johnson Carol, Chaar Ghassan, Banko Marion et al. (2018-04)
    Automated Construction with Concrete:
    Response of Wall- and Beam-Sections to Blast-Loads