Skip to content

#flexural

Keywords by Co - Occurrence

  1. Kiyani Muhammad, Kamal Muhammad, Hussain Syed, Emaan Rajja et al. (2026-01)
    A Novel Arch Infill for 3D Concrete Printed Beams:
    A Comparative Study of Flexural Performance Against Truss and Solid Designs
  2. Cong Long-Yu, Zhang Fang, Qian Yong-Jiu (2025-12)
    Flexural Behavior Investigation of RC Beams with FRP-Reinforced 3D-Printed ECC Permanent Formwork
  3. Deng North, Wang Sizhe, Li Mingyang, Wang Xiangyu et al. (2025-12)
    A Perforated Strip-Based Three-Dimensional Reinforcement Strategy for 3D Printed Concrete:
    Flexural Testing of Beams as a Proof of Concept
  4. Li Shiping, Sun Yan, Qian Ye, Chen Wujun et al. (2025-11)
    Bio-Inspired Jigsaw-Interlocking Suture Interfaces for Enhanced Flexural Response of 3D-Printed Strain-Hardening Cementitious Composites
  5. Drumond Pedro, Milagres Geysiane, Parassen Paloma, Santos Luana et al. (2025-10)
    Assessment of Printing Direction in Flexural Tests of 3D Printed Reinforced Concrete Beams
  6. Bai Gang, Wang Li, Li Zhijian, Qu Yao et al. (2025-09)
    Integrating Prestress into 3D Printed Ultra-High Performance Concrete Composite Beams for Superior Flexural Performance
  7. Li Shiping, Sun Yan, Qian Ye, Chen Wujun et al. (2025-08)
    Bio-Inspired Bouligand Architectures for Enhanced Flexural Performance in 3D-Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
  8. Motiani Ronak, Sylvain Saha, Dalal Sejal, Vora Jay et al. (2025-08)
    Innovative Reinforcement Techniques for 3D-Printed Concrete:
    The Impact of Shape Memory Alloys on Flexural Strength and Crack Mitigation
  9. Rousan Rajai, Alnemrawi Bara'a, Abdalla Khairedin, Alhassan Mohammad et al. (2025-06)
    The Flexural Behavior of Engineered Cementitious Composites (ECC) One-Way 3D Printed Slabs Made of Solid and Hollow Sections
  10. Wolfs Robert, Versteege Jelle, Santhanam Manu, Bhattacherjee Shantanu et al. (2025-06)
    Flexural and Tensile Strength:
    Mechanical Properties of 3D Printed Concrete
  11. Khodadadi Nima, Roghani Hossein, Caso Francisco, Kenawy El‐Sayed et al. (2025-06)
    Machine Learning Approach for the Flexural Strength of 3D‐Printed Fiber‐reinforced Concrete Based on the Meta‐heuristic Algorithm
  12. Ye Huzi, He Qianpeng, Ping Pengxin, Pan Jinlong et al. (2025-06)
    Anisotropic Flexural Behavior and Energy Absorption of 3D Printed Engineered Cementitious Composites (3DP-ECC) Beams Under Low-Velocity Impact
  13. Mostert Jean-Pierre, Kruger Jacques (2025-06)
    Improving Shear and Flexural Performance of Macroscale 3D Printed Concrete Beams Through Filament Interlocking
  14. Kim Tae, Oh Sangwoo, Lee Jinsuk, Dong Won-Jun et al. (2025-05)
    Effects of 3D-Printed Concrete Permanent Formwork on the Flexural Behavior of Reinforced Concrete Beams:
    Experimental and Analytical Investigations
  15. Raza Saim, Sakha Mahsa, Hassan Zohaib, Manshadi Behzad et al. (2025-05)
    Flexural Behavior of Stay-in-Place Load-Bearing 3D-Printed Concrete Formwork for Ribbed Slabs
  16. Tarhan Yeşim, Tarhan İsmail, Perrot Arnaud (2025-05)
    Flexural Performance of Glass Fiber Textile Reinforced 3D Printed Concrete
  17. Liu Xingzi, Xu Jie, Dobrzanski James, Kolawole John et al. (2025-05)
    Factors Affecting the Flexural Performance of Reinforced 3D Printed Concrete Beams
  18. Yang Guojun, Weng Yiwei, Tian Jiefu, Yang Zhenjun (2025-05)
    3D Printing Towards Cost-Effective Design of Composite UHPFRC Beams:
    Effects of Fiber Distribution and Orientation on Flexural Performances and Failure Mode Transition
  19. Ghodke Swapnil, Chowdhury Shubhankar, Singh Bhupinder (2025-04)
    Characterising Flexural Behaviour of Coarse Aggregate-Based 3D Printed Concrete Beams Using Acoustic Emission Technique
  20. Kompella Sriram, Levi Marinella, Ferrara Liberato (2025-04)
    Identifying Interlayer Fracture Properties in 3D Printed Concrete Specimens via Multidirectional Flexural Tests
  21. Teng Fei, Ye Junhong, Yu Jie, Weng Yiwei (2025-04)
    Multi-Material Printing to Simultaneously Enhance Interlayer and Flexural Performance in 3D Concrete Printing
  22. Yassin Ahmed, Hafez Mohamed, Aboelhassan Mohamed (2025-04)
    Experimental and Numerical Investigation on the Effect of Different Types of Synthetic Fibers on the Flexure Behavior and Mechanical Properties of 3D Cementitious Composite Printing Provided with Cement CEM II/A-P
  23. Liu Xiongfei, Yang Xiaojie, Sun Yuhang (2025-04)
    Synchronous Construction of Spray-Based 3D Printed Reinforced Concrete Structure:
    Effect of 2.5D Rebar Structure on the Flexural Performance of Slab
  24. Banijamali Kasra, Dempsey Mary, Chen Jianhua, Kazemian Ali (2025-02)
    Machine Learning Approach to Predict the Early-Age Flexural Strength of Sensor-Embedded 3D-Printed Structures
  25. Du Guoqiang, Qian Ye (2025-01)
    Enhancing the Fracture and Flexural Behavior of 3D Printed Strain-Hardening Cementitious Composites with Nature-Inspired Single and Double Bouligand Structures
  26. Yu Jie, Teng Fei, Ye Junhong, Zhang Dong et al. (2025-01)
    Size-Dependent Model to Predict the Flexural-Strength of 3D Printed Engineered Cementitious Composites Beams
  27. Skibicki Szymon, Dvořák Richard, Pazdera Luboš, Topolář Libor et al. (2024-11)
    Anisotropic Mechanical Properties of 3D Printed Mortar Determined by Standard Flexural and Compression-Test and Acoustic Emission
  28. Wang Qiang, Yang Wenwei, Wang Li, Zhang Dan et al. (2024-09)
    Flexural Performance of the Integrated Steel-Truss-Reinforced 3D Printed Concrete Beams:
    Experimental and Numerical Analysis
  29. Ogura Hiroki, Hara Koichiro, Yamamoto Shinya, Abe Hiroyuki (2024-09)
    Flexural Performance of Fiber-Reinforced 3D Printed Concrete Beams with Axial Rebar
  30. Hojati Maryam, Sedghi Reza, Li Zhanzhao, Memari Ali et al. (2024-09)
    Flexural Strength of 3D Printed Concrete Beams:
    Exploring Barbed-Wire Reinforcement and Cross-Sectional Geometry
  31. Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-09)
    Enhancing Inter-Layer Bond Strength and Flexural Performance in 3D Concrete Printing with SHCC Bonding Agents
  32. Yu Jie, Weng Yiwei, Teng Fei, Ye Junhong et al. (2024-09)
    Prediction of the Flexural Strength of 3D Printed SHCC Beams Based on a Stochastic Size-Dependent Model
  33. Yao Yiming, Bu Dechao, Yu Jiamian, Shao Lijing et al. (2024-08)
    Flexural Behavior of Textile Reinforced 3D Printed Concrete Under Quasi-Static and Dynamic Impact Loads
  34. Qiu Minghong, Qian Ye, Sun Yan, Leung Christopher (2024-07)
    Flexural Performance of Concrete Beams via 3D Printing Stay-in-Place Formwork Followed by Casting of Normal Concrete
  35. Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-07)
    Development of Strain-Hardening Cementitious Composites (SHCC) As Bonding Materials to Enhance Inter-Layer and Flexural Performance of 3D Printed Concrete
  36. Duan Jiaqi, Sun Shouzheng, Chi Shengfeng, Hu Chunyou et al. (2024-06)
    Effect of Process Parameters on Forming Quality and Flexural Strength of Continuous-Fiber-Reinforced Cement-Based 3D Printed Composites
  37. To Quoc, Pham Koa, Lee Gayoon, Shin Myoungsu et al. (2024-06)
    Experimental and FEM Evaluation of the Influence of Inter-Layer Bonding Strength in 3D Printed Concrete Members Under Compressive and Flexural Loadings
  38. Bai Meiyan, Xiao Jianzhuang, Wu Yuching, Ding Tao (2024-05)
    Experimental and Numerical Study on the Flexural Behavior of 3D Printed Composite Beams with U-Shaped ECC Formwork
  39. Qiu Minghong, Qian Ye, Dai Jian-Guo (2024-05)
    Enhancing the Flexural Performance of Concrete Beams with 3D Printed UHP-SHCC Permanent Formwork via Graded Fiber Volume Fraction
  40. Du Guoqiang, Sun Yan, Qian Ye (2024-03)
    Flexural Performance of Nature-Inspired 3D Printed Strain-Hardening Cementitious Composites with Bouligand Structures
  41. Chen Meng, Fang Shuai, Wang Guangquan, Xuan Yiwei et al. (2024-03)
    Compressive and Flexural Behavior of Engineered Cementitious Composites-Based Auxetic Structures:
    An Experimental and Numerical Study
  42. Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-01)
    Experimental and Numerical Evaluation of Multi-Directional Compressive and Flexure Behavior of Three-Dimensional Printed Concrete
  43. Liu Qiong, Cheng Shengbo, Peng Bin, Chen Kailun et al. (2024-01)
    The Buildability and Flexural Properties of 3D Printed Recycled Mortar Reinforced with Synchronized Steel-Cable Under Different Reinforcement Ratios
  44. Pham Thi, Trinh Duy, Do Trong, Huang Jie (2023-12)
    Flexural Behavior of Printed Concrete Wide Beams with Dispersed Fibers-Reinforced
  45. Dey Dhrutiman, Nguyen Vuong, Nguyen-Xuan Hung, Srinivas Dodda et al. (2023-12)
    Flexural Performance of 3D Printed Concrete Structure with Lattice-Infills
  46. Liu Qiong, Cheng Shengbo, Sun Chang, Chen Kailun et al. (2023-11)
    Steel-Cable Bonding in Fresh Mortar and 3D Printed Beam Flexural Behavior
  47. Ye Junhong, Zhang Jiangdi, Yu Jie, Yu Jiangtao et al. (2023-11)
    Flexural Behaviors of 3D Printed Lightweight Engineered Cementitious Composites (ECC) Slab with Hollow Sections
  48. Zhu Binrong, Wang Yufei, Sun Junbo, Wei Yang et al. (2023-10)
    An Experimental Study on the Influence of Waste-Rubber-Particles on the Compressive, Flexural and Impact Properties of 3D Printable Sustainable Cementitious Composites
  49. Ye Junhong, Yang Minxin, Yu Jiangtao, Dai Yecheng et al. (2023-10)
    Size-Effect on Flexural and Fracture Behaviors of 3D Printed Engineered Cementitious Composites:
    Experimental and Numerical Studies
  50. Alarrak Rashed, Jeon Byeonguk, Brand Alexander (2023-09)
    Flexural Toughness of Extruded Fiber-Reinforced Mortar with Preferentially Aligned Fibers
  51. Ali Ammar, Riaz Raja, Malik Umair, Abbas Syed et al. (2023-06)
    Machine-Learning-Based Predictive-Model for Tensile and Flexural Strength of 3D Printed Concrete
  52. Rahmat N., Ali Noorwirdawati, Abdullah Siti, Abdul Hamid Noor et al. (2023-06)
    Fresh Properties and Flexural Strength of 3D Printing Sustainable Concrete Containing GGBS as Partial Cement Replacement
  53. Pham Thi, Trinh Duy, Nguyen Thi, Do Trong et al. (2023-06)
    Study on Flexural Behavior of Printed Concrete Wide Beams Using Polypropylene-Fibers
  54. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2023-05)
    Wet Joint Performance of 3D Printed Concrete Beam Segments Under Flexural Loading
  55. Budiman Franky, Chandra Jimmy, Halim Alvin, Pudjisuryadi Pamuda (2023-04)
    Flexural and Shear Behavior of 3D Printed Reinforced Concrete Beams:
    An Experimental Study
  56. Kumar Devalla Tharun, Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2023-04)
    Investigation on the Flexural and Tensile Performance of 3D Printable Cementitious Mixtures Considering the Effect of Fiber-Distribution
  57. Liu Haoran, Xiao Jianzhuang, Ding Tao (2023-03)
    Flexural Performance of 3D Printed Composite Beams with ECC and Recycled Fine Aggregate Concrete:
    Experimental and Numerical Analysis
  58. Liu Miao, Wang Li, Ma Guowei, Li Weiwei et al. (2022-11)
    U-Type Steel-Wire-Mesh for the Flexural Performance Enhancement of 3D Printed Concrete:
    A Novel Reinforcing Approach
  59. Menna Costantino, Esposito Laura (2022-06)
    Flexural Behavior of Steel-Reinforced Topology-Optimised Beams Fabricated by 3D Concrete Printing
  60. Galeote Eduardo, Egea Carlos, Fuente Albert (2022-06)
    Characterisation and Modelling of a 3D Concrete Printed Wall under Flexure
  61. Cai Jingming, Sheng Zhaoliang, Wang Xiaoyi, Fang Yizhi et al. (2021-12)
    Effect of Reinforcement-Configurations on the Flexural Behaviors of 3D Printed Fiber-Reinforced Cementitious Composite Beams
  62. Nair Sooraj, Li Anling, Mobasher Barzin, Neithalath Narayanan (2021-12)
    Effect of Layer-Height on Tensile Stress-Distribution and Crack-Width and Propagation in 3D Printed Fiber-Reinforced Flexural Elements
  63. Rutzen Matthias, Schulz Michael, Moosburger-Will Judith, Lauff Philipp et al. (2021-11)
    3D Printing as an Automated Manufacturing Method for a Carbon-Fiber-Reinforced Cementitious Composite with Outstanding Flexural Strength (105 N/mm²)
  64. Liu Junli, Li Shuai, Gunasekara Chamila, Fox Kate et al. (2021-11)
    3D Printed Concrete with Recycled Glass:
    Effect of Glass Gradation on Flexural Strength and Microstructure
  65. Nair Sooraj, Tripathi Avinaya, Neithalath Narayanan (2021-09)
    Examining Layer-Height Effects on the Flexural and Fracture Response of Plain and Fiber-Reinforced 3D Printed Beams
  66. Liu Miao, Huang Yimiao, Wang Fang, Sun Junbo et al. (2021-05)
    Tensile and Flexural Properties of 3D Printed Jackets-Reinforced Mortar
  67. Ding Tao, Xiao Jianzhuang, Zou Shuai, Yu Jiangtao (2021-03)
    Flexural Properties of 3D Printed Fiber-Reinforced Concrete with Recycled Sand
  68. Xiao Jianzhuang, Liu Haoran, Ding Tao (2020-11)
    Finite-Element-Analysis on the Anisotropic Behavior of 3D Printed Concrete under Compression and Flexure
  69. Wang Weiqiang, Konstantinidis Nikolaos, Austin Simon, Buswell Richard et al. (2020-07)
    Flexural Behavior of AR-Glass-Textile-Reinforced 3D Printed Concrete Beams
  70. Yeon Kyu-Seok, Kim Kwan, Yeon Jaeheum, Lee Hee (2019-08)
    Compressive and Flexural Strengths of EVA-Modified Mortars for 3D Additive Construction
  71. Lim Jian, Panda Biranchi, Pham Quang-Cuong (2018-05)
    Improving Flexural Characteristics of 3D Printed Geopolymer Composites with In-Process Steel-Cable-Reinforcement
  72. Hambach Manuel, Möller Hendrik, Neumann Thomas, Volkmer Dirk (2016-08)
    Portland-Cement-Paste with Aligned Carbon-Fibers Exhibiting Exceptionally High Flexural Strength (>100 MPa)