Skip to content

#activation

Keywords by Co - Occurrence

  1. Driouich Anas, Dalconi Maria, Franchin Giorgia, Bettanini Carlo et al. (2026-01)
    Optimization of Alkali-Activated Regolith Simulants for Lunar Construction by 3D Printing
  2. Ding Tao, Lian Hongqian (2026-01)
    Buildability Analysis of 3D Concrete Printing:
    A Finite Element Model Incorporating Segment-by-Segment Activation, Nozzle Constraint, and Extrusion Pressure
  3. Sheng Zhaoliang, Ding Shaolong, Zhu Binrong, Cai Jingming et al. (2026-01)
    Bonding Performance of Toothed Interfaces in 3D Printed Alkali-Activated Concrete
  4. Rudziewicz Magdalena, Maroszek Marcin, Hebda Marek (2025-09)
    Comparison of Porosity and Thermal Conductivity of Concrete and Alkali-Activated Hybrid Binders in 3D-Printed Fiber-Reinforced Foamed Composites
  5. Boddepalli Uday, Kandagaddala Revanth, Nanthagopalan Prakash (2025-08)
    Evaluation of Alkali-Activated Limestone Calcined Clay Mortars for 3D Concrete Printing Applications
  6. Li Nan, Deng Yongjie, Li Weihong, Li Lingyu et al. (2025-08)
    Performance of Active-Magnesia-Based Magnesium Phosphate Cement and Application of Rapid-Solidification 3D Printing Technology
  7. Abdelaziz Mohamed, Vukorep Ilija, Mahdy Deena (2025-07)
    Exploring Extreme 3D Printed Clay Overhangs with Integrated Active Hot Air Drying System on Robotic Arm
  8. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Manalo Allan, Sanjayan Jay (2025-07)
    Rheological, Mechanical and Fire Resistance Performance of Waste Glass Activated Geopolymers for Concrete 3D Printing
  9. Chen Yanjuan, Cheikh Khadija, Rahier Hubert (2025-07)
    Methodology for the Design and Optimization of Potassium Silicate-Activated Slag Used as the Binder of 3D Printable Materials
  10. Najm Omar, Alhassan Mohammad (2025-06)
    Implementation of Brucite in Alkali-Activated Materials Intended for 3D Printed Structures:
    A Fractional Factorial Design Approach
  11. Chippagiri Ravijanya, Lanjewar Bhagyashri, Kamath Muralidhar, Ralegaonkar Rahul (2025-05)
    Prediction of Construction Materials for Conventional and Alkali-Activated 3D Concrete Printing
  12. Lucen Hao, Hanxiong Lyu, Huanghua Zhang, Shipeng Zhang et al. (2025-05)
    Development of CO2-Activated Interface Enhancer to Improve the Interlayer Properties of 3D-Printed Concrete
  13. Pederson Federico, Ellersick Liam, Kim Heejeong (2025-04)
    A Review of Lunar Regolith Based Alkali Activated Materials and Sintered Regolith for Use as a Construction Material
  14. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Feys Dimitri et al. (2025-03)
    Evaluation of Fresh Properties of High Calcium Content Fly Ash-Based Alkali-Activated 3D-Printed Mortar
  15. Aktürk Büşra, Ertuğrul Onur, Özen Ömer, Oktay Didem et al. (2025-03)
    Influence of Nano-Silica and R-MgO on Rheological Properties, 3D Printability, and Mechanical Properties of One-Part Sodium Carbonate-Activated Slag-Based Mixes
  16. Gurunandan M., Nedunuri Aparna, Tanwar Jayant, Nanthagopalan Prakash et al. (2025-02)
    Development of 3D-Printable Alkali-Activated GGBFS and Fly-Ash-Binder-Based Mortars with Concrete-Demolition-Waste as Aggregates
  17. Richter Christiane, Maurer Christian, Jungwirth Jörg (2025-01)
    Reinforcement-Strategies for Additively Manufactured Concrete Elements:
    Exploring the Potential of Different Reinforcement-Materials for Selective Cement-Activation
  18. Omur Tarik, Akpunar Ahmet, Bingöl Ayşe, Oktay Büşra et al. (2025-01)
    The Influence of Phase-Change-Material Filled Three-Dimensional Printed Artificial Aggregates on the Properties of Blast-Furnace-Slag Based Alkali-Activated Concrete
  19. Shilton Robert, Wang Shen, Banthia Nemkumar (2024-12)
    Use of Polysaccharides as a Rheology-Modifying-Admixture for Alkali-Activated Materials for 3D Printing
  20. Zhou Longfei, Gou Mifeng, Zhang Haibo, Hama Yukio (2024-12)
    Investigation of Activated Bauxite-Tailings for Application in 3D Printed Concrete via a Modified Anderson and Anderson-Model
  21. Kul Anil, Kocaer Öznur, Aldemir Alper, Yıldırım Gürkan et al. (2024-12)
    3D Printable One-Part Alkali-Activated Mortar Derived from Brick-Masonry-Wastes
  22. Dai Xiaodi, Kandy Sharu, Neithalath Narayanan, Kumar Aditya et al. (2024-11)
    Thermally Stimulated Stiffening and Fly-Ash’s Alkaline-Activation by Ca(OH)2 Addition Facilitates 3D Printing
  23. Lan Tian, Yang Shutong, Xu Mingqi, Chen Zhengyuan et al. (2024-10)
    Quantitative Assessment of Interfacial-Fracture-Properties in 3D Printed Alkali-Activated Recycled Sand Concrete Based on a Closed-Form Fracture-Model
  24. Hlaváček Petr, Kolsch Nico, Zocca Andrea, Kühne Hans-Carsten et al. (2024-09)
    Additive Manufacturing of Alkali-Activated Materials by Laser-Induced Slip Casting
  25. Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Sanjayan Jay (2024-09)
    Active Rheology-Control of Concrete Using Encapsulated Accelerator as Responsive Additives for Concrete 3D Printing
  26. Ertuğrul Onur, Özen Ömer, Oktay Didem, Yazar Tuğrul et al. (2024-09)
    Improvement of Rheological Properties and Printability of Sodium-Carbonate Activated Slag-Based Systems
  27. Noaimat Yazeed, Ghaffar Seyed (2024-09)
    Exploring Low-Carbon Cementitious Materials for 3D Printing Applications:
    A Comparison Between Limestone-Calcined-Clay-Cement and One-Part Alkai-Activated Material
  28. Hierden Naomi, Yu Q., Brouwers Henricus (2024-09)
    Mechano-Chemically Activated Local Clays as Sustainable Binder Replacement for 3D Concrete Mixtures
  29. Herding Friedrich, Lowke Dirk (2024-09)
    Improving the Dimensional Accuracy in Selective Cement-Activation by w/c-Ratio Gradation
  30. Kondepudi Kala, Gomzyakov Albert, Liebscher Marco, Mechtcherine Viktor (2024-09)
    3D Printing by Selective Activation of Geopolymer-Based Binders
  31. Rodrigues e Silva Rafaela, Souza Eduarda, Ribeiro Borges Paulo (2024-09)
    One-Part and Two-Part Alkali-Activation of Iron Mining-Tailings for Sustainable 3D Concrete Printing Mixes
  32. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Gawady Mohamed (2024-08)
    Exploration of the Open-Time and Compressive Strength of Alkali-Activated Mixtures for 3D Printed Concrete
  33. Dai Xiaodi, Tao Yaxin, Zhang Yi, Ding Luchuan et al. (2024-08)
    Development of 3D Printable Alkali-Activated Slag-Metakaolin Concrete
  34. Dvorkin Leonid, Marchuk Vitaliy, Makarenko Ruslan (2024-08)
    Mechanochemical-Activated Fly-Ash Concrete Suitable for 3D Printing
  35. Kamakshi Tippabhotla, Thakur Manideep, Subramaniam Kolluru (2024-07)
    Formulating Printable Concrete Mixtures Based on Paste-Rheology and Aggregate-Content:
    Application to Alkali-Activated Binders
  36. Geng Zifan, Zhang Lizhi, Wu Zhiwen, Tay Yi et al. (2024-07)
    Mechanical Properties and Additive Manufacturing of Alkali-Activated Lunar Regolith in Artificial Lunar Environments
  37. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2024-07)
    Set-on-Demand Geopolymer for Concrete 3D Printing Using Ternary Activator
  38. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Mechtcherine Viktor, Sanjayan Jay (2024-07)
    Two-Part Print-Head Mixing of Hybrid Alkali-Activated Cement for Buildability Enhancement in 3D Concrete Printing
  39. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Mechtcherine Viktor, Sanjayan Jay (2024-07)
    Alkali-Activated Waste Glass-Based Geopolymer Concrete for Digital Construction
  40. Zhang Yi, Tittelboom Kim, Schutter Geert, Jiang Zhengwu (2024-07)
    Active Rheology-Control for 3D Printable Cement-Based Materials by Temperature:
    An Exploratory Study
  41. Basha Shaik, Nugraha Joshua, Rehman Atta, Choi Kichang et al. (2024-06)
    Structuration and Yield Strength Characterization of Hybrid Alkali-Activated Cement Composites for Ultra-Rapid 3D Construction Printing
  42. Kamakshi Tippabhotla, Subramaniam Kolluru (2024-05)
    Rheology-Control and 3D Concrete Printing with Fly Ash-Based Aqueous Nano-Silica Enhanced Alkali-Activated Binders
  43. Salari Farid, Zocca Andrea, Bosetti Paolo, Hlaváček Petr et al. (2024-05)
    Powder-Bed 3D Printing by Selective Activation of Magnesium-Phosphate-Cement:
    Determining Significant Processing Parameters and Their Effect on Mechanical Strength
  44. Tao Yaxin, Dai Xiaodi, Schutter Geert, Tittelboom Kim (2024-05)
    Adhesion Performance of Alkali-Activated Material for 3D Printing of Tunnel Linings at Different Temperatures
  45. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Mechtcherine Viktor, Sanjayan Jay (2024-05)
    Print-Head Mixing of Geopolymer and OPC Slurries for Hybrid Alkali-Activated Cement in 3D Concrete Printing
  46. Zhang Yiyuan, Tao Yaxin, Zhang Yi, Tittelboom Kim et al. (2024-04)
    Up-Scaling Active Rheology-Control to Cement-Mortar with the Intervention of an In-Line Magnetic Field
  47. Zhang Yi, Ren Qiang, Dai Xiaodi, Tao Yaxin et al. (2024-03)
    A Potential Active Rheology-Control Approach for 3D Printable Cement-Based Materials:
    Coupling of Temperature and Viscosity-Modifiers
  48. Chen Zhengyuan, Yang Shutong, Liu Qi, Xu Mingqi et al. (2024-03)
    Closed-Form Fracture-Model for Evaluating Crack-Resistance of 3D Printed Fiber-Reinforced Alkali-Activated Slag/Fly-Ash Recycled-Sand Concrete
  49. Vigneshwari Are, Jayaprakash Jaganathan (2024-02)
    A Review on 3D Printable Cementitious Material Containing Copper and Iron-Ore-Tailings:
    Material-Characterization, Activation-Methods, Engineering-Properties, Durability, and Microstructure-Behavior
  50. Sun Yubo, Mohan Manu, Tao Yaxin, Zhang Yi et al. (2024-02)
    A Conceptual Design of Two-Stream Alkali-Activated Materials
  51. Moraes Maria, Nagata Ester, Duran Afonso, Rossignolo João (2024-02)
    Alkali-Activated Materials Applied in 3D Printing Construction:
    A Review
  52. Perales-Santillan M., Díaz-Aguilera Jorge, Mendoza-Rangel Jose (2024-02)
    Evaluation of the Rheological Behavior for Alkaline-Activated Cements of Metakaolin and Limestone for Its Potential Application in 3D Printing
  53. Pavlin Majda, Horvat Barbara, Cerc Korošec Romana, Capuder Rok et al. (2024-01)
    Characterisation of a 3D Printed Alkali-Activated Material Based on Waste-Mineral-Wool at Room and Elevated Temperatures
  54. Fahim Abdullah, Admassu Natnael, Dailey Garret, Moradllo Mehdi (2023-12)
    Application of Cellulose-Nano-Crystals in 3D Printed Alkali-Activated Cementitious Composites
  55. Mai (née Dressler) Inka, Herding Friedrich, Lowke Dirk (2023-12)
    Effect of Grain-Size and Layer-Thickness on Hardened State Properties in Selective Cement-Activation
  56. Kruppa Henning, Kalthoff Matthias, Vollpacht Anya, Matschei Thomas (2023-12)
    Development of an Alkali-Activated Binder for the Extrusion Process
  57. Herding Friedrich, Mai (née Dressler) Inka, Lowke Dirk (2023-12)
    Reduction of the Cement Content in Selective Cement-Activation
  58. Noaimat Yazeed, Chougan Mehdi, Albar Abdulrahman, Skibicki Szymon et al. (2023-10)
    Recycled Brick-Aggregates in One-Part Alkali-Activated Materials:
    Impact on 3D Printing Performance and Material-Properties
  59. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2023-09)
    Rapid Early-Age Strength Development of In-Line Activated Geopolymer for Concrete 3D Printing
  60. Kogai A., Puzatova (nee Sharanova) Anastasiia, Dmitrieva Maria (2023-09)
    Modification of Fine Multicomponent Concrete with Activated Component-Based Additive
  61. Yin Yunchao, Huang Jian, Wang Tiezhu, Yang Rong et al. (2023-09)
    Effect of Hydroxypropyl-Methylcellulose on Rheology and Printability of the First Printed Layer of Cement Activated Slag-Based 3D Printing Concrete
  62. Yue Hongfei, Zhang Zhuxian, Hua Sudong, Gao Yanan et al. (2023-09)
    Solid Waste-Based Set-on-Demand 3D Printed Concrete:
    Active Rheological-Control of Cement-Based Magneto-Rheological Fluids
  63. Villaquirán-Caicedo Mónica, Fernández-González Alejandro, Fernández-García Daniel, Gutiérrez Ruby (2023-07)
    Valorization of a Low-Quality Coal-Ash, in the Preparation of Alkali-Activated Inks for Applications in 3D Additive Manufacturing
  64. Robayo-Salazar Rafael, Martínez Fabio, Vargas Armando, Gutiérrez Ruby (2023-06)
    3D Printing of Hybrid Cements Based on High Contents of Powders from Concrete, Ceramic and Brick Waste Chemically Activated with Sodium Sulphate (Na2SO4)
  65. Sahoo Pitabash, Gupta Souradeep (2023-06)
    3D Printable Earth-Based Alkali-Activated Materials:
    Role of Mix-Design and Clay-Rich Soil
  66. Kruppa Henning, Kalthoff Matthias, Neef Tobias, Reißig Silvia et al. (2023-06)
    Alkali-Activated Binder-Requirements for Extrusion and 3D Printing of Carbon-Reinforced Concrete
  67. Tao Yaxin, Dai Xiaodi, Schutter Geert, Tittelboom Kim (2023-06)
    Set-on-Demand of Alkali-Activated Slag Mixture Using Twin-Pipe Pumping
  68. Mujeeb Syed, Samudrala Manideep, Lanjewar Bhagyashri, Chippagiri Ravijanya et al. (2023-05)
    Development of Alkali-Activated 3D Printable Concrete:
    A Review
  69. Valente Marco, Sambucci Matteo, Chougan Mehdi, Ghaffar Seyed (2023-04)
    Composite Alkali-Activated Materials with Waste-Tire-Rubber Designed for Additive Manufacturing:
    An Eco-Sustainable and Energy Saving Approach
  70. Talke Daniel, Saile Bettina, Meier Niklas, Herding Friedrich et al. (2023-03)
    Particle-Bed 3D Printing by Selective Cement-Activation:
    Influence of Process Parameters on Particle-Bed Density
  71. Chaiyotha Danai, Kantawong Watcharapong, Payakanitia Panjasila, Pinitsoontorn Supree et al. (2023-03)
    Finding Optimized Conditions for 3D Printed High-Calcium Fly-Ash-Based Alkali-Activated Mortar
  72. Dai Xiaodi, Tao Yaxin, Tittelboom Kim, Schutter Geert (2023-02)
    Rheological and Mechanical Properties of 3D Printable Alkali-Activated Slag Mixtures with Addition of Nano Clay
  73. Kondepudi Kala, Subramaniam Kolluru, Nematollahi Behzad, Bong Shin et al. (2022-11)
    Study of Particle-Packing and Paste-Rheology in Alkali-Activated Mixtures to Meet the Rheology Demands of 3D Concrete Printing:
    Correction
  74. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2022-10)
    In-Line Activation of Geopolymer-Slurry for Concrete 3D Printing
  75. Bong Shin, Nematollahi Behzad, Nerella Venkatesh, Mechtcherine Viktor (2022-09)
    Method of Formulating 3D Printable Strain-Hardening Alkali-Activated Composites for Additive Construction
  76. Chougan Mehdi, Ghaffar Seyed, Nematollahi Behzad, Sikora Paweł et al. (2022-09)
    Effect of Natural and Calcined-Halloysite-Clay-Minerals as Low-Cost-Additives on the Performance of 3D Printed Alkali-Activated Materials
  77. Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Sanjayan Jay (2022-06)
    Set-On Demand Concrete by Activating Encapsulated Accelerator for 3D Printing
  78. Herding Friedrich, Mai (née Dressler) Inka, Lowke Dirk (2022-06)
    Effect of Curing in Selective Cement-Activation
  79. Mai (née Dressler) Inka, Herding Friedrich, Lowke Dirk (2022-06)
    Evaluating the Effect of Methyl-Cellulose on Hardened State Properties in Selective Cement-Activation
  80. Kondepudi Kala, Subramaniam Kolluru, Nematollahi Behzad, Bong Shin et al. (2022-05)
    Study of Particle-Packing and Paste-Rheology in Alkali-Activated Mixtures to Meet the Rheology Demands of 3D Concrete Printing
  81. Ramakrishnan Sayanthan, Kanagasuntharam Sasitharan, Sanjayan Jay (2022-05)
    In-Line Activation of Cementitious Materials for 3D Concrete Printing
  82. Nodehi Mehrab, Ozbakkaloglu Togay, Gholampour Aliakbar (2022-04)
    Effect of Supplementary Cementitious Materials on Properties of 3D Printed Conventional and Alkali-Activated Concrete:
    A Review
  83. Mai (née Dressler) Inka, Lowke Dirk, Perrot Arnaud (2022-03)
    Fluid-Intrusion in Powder-Beds for Selective Cement-Activation:
    An Experimental and Analytical Study
  84. Yuan Qiang, Gao Chao, Huang Tingjie, Zuo Shenghao et al. (2022-03)
    Factors Influencing the Properties of Extrusion-Based 3D Printed Alkali-Activated Fly-Ash-Slag Mortar
  85. Chen Yuning, Liu Chao, Cao Ruilin, Chen Chun et al. (2022-02)
    Systematical Investigation of Rheological Performance Regarding 3D Printing Process for Alkali-Activated Materials:
    Effect of Precursor Nature
  86. Chen Yuning, Jia Lutao, Liu Chao, Zhang Zedi et al. (2022-01)
    Mechanical Anisotropy Evolution of 3D Printed Alkali-Activated Materials with Different GGBFS-FA Combinations
  87. Amran Mugahed, Abdelgader Hakim, Onaizi Ali, Fediuk Roman et al. (2021-12)
    3D Printable Alkali-Activated Concretes for Building Applications:
    A Critical Review
  88. Kocherla Amarteja, Kamakshi Tippabhotla, Subramaniam Kolluru (2021-11)
    In-Situ Embedded PZT Sensor for Monitoring 3D Concrete Printing:
    Application in Alkali-Activated Fly-Ash-Slag Geopolymers
  89. Deshmukh Aparna, Heintzkill Reed, Huerta Rosalba, Sobolev Konstantin (2021-11)
    Rheological Response of Magnetorheological Cementitious Inks Tuned for Active Control in Digital Construction
  90. Kondepudi Kala, Subramaniam Kolluru (2021-11)
    Extrusion-Based Three-Dimensional Printing Performance of Alkali-Activated Binders
  91. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Gawady Mohamed (2021-09)
    Developing Mix Proportions for Class C Fly-Ash-Based Alkali-Activated 3D Printed Concrete Mixtures
  92. Zhang Yifan, Aslani Farhad (2021-08)
    Development of Fiber-Reinforced Engineered Cementitious Composite Using Polyvinyl-Alcohol-Fiber and Activated Carbon-Powder for 3D Concrete Printing
  93. Lv Xuesen, Qin Yao, Liang Hang, Cui Xuemin (2021-07)
    Effects of Modifying-Agent on Rheology and Workability of Alkali-Activated Slag-Paste for 3D Extrusion-Forming
  94. Sikora Paweł, Chougan Mehdi, Cuevas Villalobos Karla, Liebscher Marco et al. (2021-02)
    The Effects of Nano- and Micro-Sized Additives on 3D Printable Cementitious and Alkali-Activated Composites:
    A Review
  95. Kondepudi Kala, Subramaniam Kolluru (2021-02)
    Formulation of Alkali-Activated Fly-Ash-Slag Binders for 3D Concrete Printing
  96. Chougan Mehdi, Ghaffar Seyed, Sikora Paweł, Chung Sang-Yeop et al. (2021-02)
    Investigation of Additive Incorporation on Rheological, Microstructural and Mechanical Properties of 3D Printable Alkali-Activated Materials
  97. Sanjayan Jay, Jayathilakage Roshan, Rajeev Pathmanathan (2020-11)
    Vibration-Induced Active Rheology-Control for 3D Concrete Printing
  98. Nething Christoph, Smirnova Maya, Gröning Janosch, Haase Walter et al. (2020-08)
    A Method for 3D Printing Bio-Cemented Spatial Structures Using Sand and Urease-Active-Calcium-Carbonate-Powder
  99. Weger Daniel, Kim Heejeong, Talke Daniel, Henke Klaudius et al. (2020-07)
    Lightweight Concrete 3D Printing by Selective Cement-Activation:
    Investigation of Thermal Conductivity, Strength and Water-Distribution
  100. Lowke Dirk, Talke Daniel, Mai (née Dressler) Inka, Weger Daniel et al. (2020-05)
    Particle-Bed 3D Printing by Selective Cement-Activation:
    Applications, Material and Process Technology
  101. Lu Bing, Zhu Weiping, Weng Yiwei, Liu Zhixin et al. (2020-02)
    Study of MgO-Activated-Slag as a Cementless Material for Sustainable Spray-Based 3D Printing
  102. Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2020-01)
    Investigation of the Properties of Alkali-Activated Slag Mixes Involving the Use of Nano-Clay and Nucleation-Seeds for 3D Printing
  103. Alghamdi Hussam, Nair Sooraj, Neithalath Narayanan (2019-02)
    Insights into Material-Design, Extrusion Rheology, and Properties of 3D Printable Alkali-Activated Fly-Ash-Based Binders
  104. Schutter Geert, Lesage Karel (2018-09)
    Active Control of Properties of Concrete:
    A (P)Review
  105. Vaitkevičius Vitoldas, Šerelis Evaldas, Kerševičius Vidas (2018-03)
    Effect of Ultra-Sonic Activation on Early Hydration Process in 3D Concrete Printing Technology
  106. Sarakinioti Maria, Turrin Michela, Konstantinou Thaleia, Tenpierik Martin et al. (2018-03)
    Developing an Integrated 3D Printed Façade with Complex Geometries for Active Temperature-Control