Numerical Simulations of Concrete Processing (2020-06)¶
From Standard Formative Casting to Additive Manufacturing
10.1016/j.cemconres.2020.106075
, , Wallevik Jon,
Journal Article - Cement and Concrete Research, Vol. 135
Abstract
The concrete industry is facing new digital shaping processes that still have to be optimized and that require cement-based materials, for which fresh properties requirements are yet to be defined. In this paper, we first present the state of the art in the field of numerical simulations of concrete flow. We then focus on the literature on numerical simulations of extrusion-based additive manufacturing processes for concrete. Our review shows that the available numerical modelling tools are able to detect and predict various type of failures through the printing process, no matter if these happen at the scale of the nozzle, of one printed layer or of the entire object being printed. As they allow for a systematic evaluation of the influence of the entire range of material, geometric and process parameters, numerical modelling is a valid option to optimize both process and material.
¶
17 References
- Comminal Raphaël, Serdeczny Marcin, Pedersen David, Spangenberg Jon (2019-06)
Motion-Planning and Numerical Simulation of Material-Deposition at Corners in Extrusion Additive Manufacturing - Jayathilakage Roshan, Sanjayan Jay, Rajeev Pathmanathan (2019-01)
Direct-Shear-Test for the Assessment of Rheological Parameters of Concrete for 3D Printing Applications - Keita Emmanuel, Bessaies-Bey Hela, Zuo Wenqiang, Belin Patrick et al. (2019-06)
Weak Bond Strength Between Successive Layers in Extrusion-Based Additive Manufacturing:
Measurement and Physical Origin - Kruger Jacques, Cho Seung, Zeranka Stephan, Vintila Cristian et al. (2019-12)
3D Concrete Printer Parameter Optimization for High-Rate Digital Construction Avoiding Plastic Collapse - Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
Extrusion-Based Additive Manufacturing with Cement-Based Materials:
Production Steps, Processes, and Their Underlying Physics - Nerella Venkatesh, Mechtcherine Viktor (2018-03)
Virtual Sliding-Pipe Rheometer for Estimating Pumpability of Concrete - Perrot Arnaud, Rangeard Damien, Pierre Alexandre (2015-02)
Structural Build-Up of Cement-Based Materials Used for 3D Printing-Extrusion-Techniques - Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2018-06)
The Role of Early-Age Structural Build-Up in Digital Fabrication with Concrete - Roussel Nicolas (2018-05)
Rheological Requirements for Printable Concretes - Roussel Nicolas, Bessaies-Bey Hela, Kawashima Shiho, Marchon Delphine et al. (2019-08)
Recent Advances on Yield-Stress and Elasticity of Fresh Cement-Based Materials - Serdeczny Marcin, Comminal Raphaël, Pedersen David, Spangenberg Jon (2019-05)
Numerical Simulations of the Mesostructure Formation in Material-Extrusion Additive Manufacturing - Suiker Akke (2018-01)
Mechanical Performance of Wall Structures in 3D Printing Processes:
Theory, Design Tools and Experiments - Wolfs Robert, Bos Freek, Salet Theo (2018-06)
Correlation Between Destructive Compression Tests and Non-Destructive Ultrasonic Measurements on Early-Age 3D Printed Concrete - Wolfs Robert, Bos Freek, Salet Theo (2018-02)
Early-Age Mechanical Behaviour of 3D Printed Concrete:
Numerical Modelling and Experimental Testing - Wolfs Robert, Bos Freek, Salet Theo (2019-03)
Hardened Properties of 3D Printed Concrete:
The Influence of Process Parameters on Inter-Layer Adhesion - Wolfs Robert, Bos Freek, Salet Theo (2019-06)
Triaxial Compression Testing on Early-Age Concrete for Numerical Analysis of 3D Concrete Printing - Wolfs Robert, Suiker Akke (2019-06)
Structural Failure During Extrusion-Based 3D Printing Processes
70 Citations
- Telichko Victor, Slavcheva Galina, Levchenko Artem (2025-12)
Experimentally Verified FE Model of Bending Reinforced 3D-Printed Concrete Elements - Faleschini Flora, Trento Daniel, Zanini Mariano (2025-11)
Earth as a Building Material:
From Traditional Building Techniques to Additive Manufacturing - Foulki Rida, Mesoudy Mouad, Cherkaoui Khalid (2025-10)
Numerical and Theoretical Analysis of Pumping and Extrusion in 3D Concrete Printing - Xia Kailun, Chen Yuning, Jia Lutao, Quan Shitao et al. (2025-10)
The Impact of Internal Stress Generated During the Printing Process on the Early-Age Properties of 3D Printed Concrete - Shekhar Shashank, Kumar Manish, Mathur Rishabh (2025-10)
Additive Manufacturing of Concrete with Low Initial Yield Strength Through Controlled Heating of Printed Layers - Kiyani Muhammad, Hussain Syed, Emaan Rajja, Kamal Muhammad et al. (2025-08)
Influence of Process Parameters on 3D Concrete Printing:
A Step Towards Standardized Approaches - Wagner Gabriel, Silva João, Ribeiro João, Figueiredo Bruno et al. (2025-08)
A Novel and Flexible Approach to Modeling the Additive Manufacturing Extrusion of Cementitious Materials - Yang Rijiao, Xu Chengji, Fang Sen, Li Xinze et al. (2025-07)
Mechanistic Insights into Microstructural Changes Caused by Stapling in Extrusion-Based 3D Printed Concrete (3DPC) - Rizzieri Giacomo, Meni Simone, Cremonesi Massimiliano, Ferrara Liberato (2025-07)
A Particle Finite Element Method for Investigating the Influence of Material and Process Parameters in 3D Concrete Printing - Jacquet Yohan, Kawashima Shiho, Spangenberg Jon (2025-06)
Unveiling the Structural Build-up 3D Printable Cement-Based Materials:
From Small Amplitude Oscillatory Shear (SAOS) To Extensional (SAOE) Rheological Workflows - Zhang Ziqi, Pan Tinghong, Guoa Rongxin, Lin Runsheng et al. (2025-04)
Simulation and Analysis of Material Stacking and Migration Induced by Extrusion Behavior in 3D Printed Concrete - Zhang Yuying, Zhu Xiaohong, Li Muduo, Zhang Chao et al. (2025-04)
3D Printing Technology in Concrete Construction - Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wong Teck et al. (2025-03)
Investigate Mechanisms of Different Printing Parameters on the Mechanical Anisotropy of 3D Concrete Printing Elements by Using Computed Tomography Scan and Computational Fluid Dynamics Methods - Özalp Abdulkadir, Aldemir Alper (2025-03)
Artificial Intelligence-Based Displacement Capacity Prediction Tool for Three-Dimensional Printed Concrete Walls - Vasilić Ksenija (2025-02)
Standardization Aspects of Concrete 3D Printing - Do Duc, Diab Zeinab, Rémond Sébastien, Hoxha Dashnor (2025-01)
Numerical Simulation-Tools for 3D Printing - Sun Yubo, Zhang Xinyue, Zhou Jiangang, Wang Yilin et al. (2024-11)
Extrudability-Analysis of 3D Printable Concrete as a Two-Phase Discrete Flow - Lachmayer Lukas, Recker Tobias, Ekanayaka Virama, Hürkamp André et al. (2024-10)
Multi-Model-Based Additive Manufacturing:
A Framework for Automated Large-Scale 3D Concrete Printing with Industrial Robots - An Ning, Wang Huai, Le Liu, Li Shuo et al. (2024-10)
Real-Time Monitoring of Extrudability and Buildability in 3D Concrete Printing Based on Target Detection Method - Wolfs Robert (2024-09)
The Status Quo of 3D Concrete Printing:
Are We There Yet? - Haghighat Negin, Mollah Md., Sannerud Stian, Boyer Julie et al. (2024-09)
Rheology and Printability of Cement-Paste Modified with Filler from Manufactured Sand - Jacquet Yohan, Spangenberg Jon, Perrot Arnaud (2024-09)
Exploring Viscosity and Friction Through Temperature:
Understanding Self-Heating Dynamics of Non-Newtonian 3D Printable Construction Materials via CFD Modeling - Cui Weijiu, Sun Haijun, Zhou Jiangang, Wang Sheng et al. (2024-07)
Geometric Quality Evaluation of Three-Dimensional Printable Concrete Using Computational Fluid Dynamics - Cheng Hanbin, Radlińska Aleksandra, Hilman Michael, Liu Feihong et al. (2024-05)
Modeling Concrete-Deposition via 3D Printing Using Reproducing Kernel-Particle-Method - Tao Yaxin, Zhou Jiangang, Cui Weijiu, Shi Xinyu et al. (2024-04)
Numerical Assessment of Plastic Yielding in Extrusion-Based 3D Concrete Printing - Wang Yibo, Ren Changzai, Yan Ming, Ao Chenyang (2024-04)
Blockage-Mechanism-Analysis and Optimization Design of 3D Concrete Print-Head - Abbaoui Khalid, Korachi Issam, Jai Mostapha, Šeta Berin et al. (2024-04)
3D Concrete Printing Using Computational Fluid Dynamics:
Modeling of Material-Extrusion with Slip-Boundaries - Wijaya Ignasius, Kreiger Eric, Masud Arif (2024-03)
Modeling of Concrete Printing Process with Frictional Interface - Alhussain Ali, Duarte José, Brown Nathan (2024-02)
Developing a Data-Driven Filament-Shape-Prediction-Model for 3D Concrete Printing - Nóbrega Anna, Queiroz Junior Cleanto, Souza Wendell, Cabral Kleber et al. (2024-02)
Computational Modeling for Structural Element Analysis Using Cement Composites in 3D Printing - Liu Ke, Takasu Koji, Jiang Jinming, Zu Kun et al. (2023-12)
Mechanical Properties of 3D Printed Concrete Components:
A Review - Reinold Janis, Daadouch Koussay, Meschke Günther (2023-11)
Numerical Simulation of Three Dimensional Concrete Printing Based on a Unified Fluid and Solid Mechanics Formulation - An Dong, Zhang Yixia, Yang Chunhui (2023-11)
Numerical Modelling of 3D Concrete Printing:
Material-Models, Boundary-Conditions and Failure-Identification - Chang Ze, Chen Yu, Schlangen Erik, Šavija Branko (2023-09)
A Review of Methods on Buildability Quantification of Extrusion-Based 3D Concrete Printing:
From Analytical Modelling to Numerical Simulation - Rizzieri Giacomo, Ferrara Liberato, Cremonesi Massimiliano (2023-07)
Numerical Simulation of the Extrusion and Layer-Deposition-Processes in 3D Concrete Printing with the Particle-Finite-Element-Method - Abbaoui Khalid, Korachi Issam, Mollah Md., Spangenberg Jon (2023-06)
Numerical Modelling of Planned Corner-Deposition in 3D Concrete Printing - Diab Zeinab, Do Duc, Rémond Sébastien, Hoxha Dashnor (2023-04)
Probabilistic Prediction of Structural Failure During 3D Concrete Printing Processes - Yang Liming, Sepasgozar Samad, Shirowzhan Sara, Kashani Alireza et al. (2022-12)
Nozzle Criteria for Enhancing Extrudability, Buildability and Inter-Layer Bonding in 3D Printing Concrete - Nguyen Vuong, Li Shuai, Liu Junli, Nguyen Kien et al. (2022-11)
Modelling of 3D Concrete Printing Process:
A Perspective on Material and Structural Simulations - Abbaoui Khalid, Korachi Issam, Mollah Md., Spangenberg Jon (2022-11)
CFD Modelling of Mortar-Extrusion and Path-Planning-Strategy at the Corner for 3D Concrete Printing - Khan Shoukat, Koç Muammer (2022-10)
Numerical Modelling and Simulation for Extrusion-Based 3D Concrete Printing:
The Underlying Physics, Potential, and Challenges - Araújo Rísia, Martinelli Antônio, Cabral Kleber, Dantas André et al. (2022-08)
Thermal Performance of Cement-Leca Composites for 3D Printing - Peralta Abadi Patricia, Smarsly Kay (2022-07)
Requirements-Analysis of Additive Manufacturing for Concrete Printing:
A Systematic Review - Zhu Binrong, Pan Jinlong, Li Junrui, Wang Penghui et al. (2022-07)
Relationship Between Microstructure and Strain-Hardening Behavior of 3D Printed Engineered Cementitious Composites - Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping (2022-07)
How Do the Contact Surface Forces Affect the Inter-Layer Bond Strength of 3D Printed Mortar? - Spangenberg Jon, Silva Wilson, Mollah Md., Comminal Raphaël et al. (2022-06)
Integrating Reinforcement with 3D Concrete Printing:
Experiments and Numerical Modelling - Reinold Janis, Meschke Günther (2022-06)
Algorithm for Aging Materials with Evolving Stiffness Based on a Multiplicative Split - Wijaya Ignasius, Kreiger Eric, Masud Arif (2022-05)
An Elastic‐Inelastic Model and Embedded Bounce‐Back-Control for Layered Printing with Cementitious Materials - Marchment Taylor, Sanjayan Jay (2022-04)
Lap Joint Reinforcement for 3D Concrete Printing - Pan Tinghong, Teng Huaijin, Liao Hengcheng, Jiang Yaqing et al. (2022-03)
Effect of Shaping Plate Apparatus on Mechanical Properties of 3D Printed Cement-Based Materials:
Experimental and Numerical Studies - Nguyen Vuong, Nguyen-Xuan Hung, Panda Biranchi, Tran Jonathan (2022-03)
3D Concrete Printing Modelling of Thin-Walled Structures - Carneau Paul, Mesnil Romain, Baverel Olivier, Roussel Nicolas (2022-03)
Layer Pressing in Concrete Extrusion-Based 3D Printing:
Experiments and Analysis - Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2022-02)
Extrusion-Process-Simulation and Layer-Shape-Prediction During 3D Concrete Printing Using the Particle-Finite-Element-Method - Mollah Md., Comminal Raphaël, Serdeczny Marcin, Pedersen David et al. (2022-01)
Numerical Predictions of Bottom-Layer-Stability in Material-Extrusion Additive Manufacturing - Wang Hailong, Shao Jianwen, Zhang Jing, Zou Daoqin et al. (2021-11)
Bond Shear Performances and Constitutive Model of Interfaces Between Vertical and Horizontal Filaments of 3D Printed Concrete - Yuan Philip, Zhan Qiang, Wu Hao, Beh Hooi et al. (2021-11)
Real-Time Tool-Path-Planning and Extrusion-Control-Method for Variable-Width 3D Concrete Printing - Liu Xuanting, Sun Bohua (2021-11)
The Influence of Interface on the Structural Stability in 3D Concrete Printing Processes - Spangenberg Jon, Silva Wilson, Comminal Raphaël, Mollah Md. et al. (2021-10)
Numerical Simulation of Multi-Layer 3D Concrete Printing - Wolfs Robert, Salet Theo, Roussel Nicolas (2021-10)
Filament-Geometry-Control in Extrusion-Based Additive Manufacturing of Concrete:
The Good, the Bad and the Ugly - Schryver Robin, Cheikh Khadija, Lesage Karel, Yardimci Mert et al. (2021-09)
Numerical Reliability Study Based on Rheological Input for Bingham-Paste-Pumping Using a Finite Volume Approach in OpenFOAM - Perrot Arnaud, Pierre Alexandre, Nerella Venkatesh, Wolfs Robert et al. (2021-07)
From Analytical Methods to Numerical Simulations:
A Process Engineering Toolbox for 3D Concrete Printing - Bhattacherjee Shantanu, Basavaraj Anusha, Rahul Attupurathu, Santhanam Manu et al. (2021-06)
Sustainable Materials for 3D Concrete Printing - Moini Mohamadreza, Baghaie Ahmadreza, Rodriguez Fabian, Zavattieri Pablo et al. (2021-06)
Quantitative Microstructural Investigation of 3D Printed and Cast Cement-Pastes Using Micro-Computed Tomography- and Image-Analysis - Bakhshi Amir, Sedghi Reza, Hojati Maryam (2021-06)
A Preliminary Study on the Mix-Design of 3D Printable Engineered Cementitious Composite - Chang Ze, Xu Yading, Chen Yu, Gan Yidong et al. (2021-05)
A Discrete Lattice-Model for Assessment of Buildability Performance of 3D Printed Concrete - Marchment Taylor, Sanjayan Jay (2021-04)
Reinforcement Method for 3D Concrete Printing Using Paste-Coated Bar Penetrations - Nguyen Vuong, Panda Biranchi, Zhang Guomin, Nguyen-Xuan Hung et al. (2021-01)
Digital Design Computing and Modelling for 3D Concrete Printing - Sepasgozar Samad, Shi Anqi, Yang Liming, Shirowzhan Sara et al. (2020-12)
Additive Manufacturing Applications for Industry 4.0:
A Systematic Critical Review - Comminal Raphaël, Silva Wilson, Andersen Thomas, Stang Henrik et al. (2020-10)
Modelling of 3D Concrete Printing Based on Computational Fluid Dynamics - Bos Freek, Wolfs Robert, Salet Theo (2020-06)
CCR Digital Concrete 2020 SI:
Editorial
BibTeX
@article{rous_span_wall_wolf.2020.NSoCP,
author = "Nicolas Roussel and Jon Spangenberg and Jon Elvar Wallevik and Robert Johannes Maria Wolfs",
title = "Numerical Simulations of Concrete Processing: From Standard Formative Casting to Additive Manufacturing",
doi = "10.1016/j.cemconres.2020.106075",
year = "2020",
journal = "Cement and Concrete Research",
volume = "135",
}
Formatted Citation
N. Roussel, J. Spangenberg, J. E. Wallevik and R. J. M. Wolfs, “Numerical Simulations of Concrete Processing: From Standard Formative Casting to Additive Manufacturing”, Cement and Concrete Research, vol. 135, 2020, doi: 10.1016/j.cemconres.2020.106075.
Roussel, Nicolas, Jon Spangenberg, Jon Elvar Wallevik, and Robert Johannes Maria Wolfs. “Numerical Simulations of Concrete Processing: From Standard Formative Casting to Additive Manufacturing”. Cement and Concrete Research 135 (2020). https://doi.org/10.1016/j.cemconres.2020.106075.