#interface
Keywords by Co - Occurrence
- Liu Chao, Chen Xianqin, Luo Zhiyu, Liu Huawei et al. (2026-01)
Effects of Pore Defects on Interfacial Bonding Between Rebar and 3D Printed Coarse Aggregate Concrete Under Multiple Loading Conditions
- Sheng Zhaoliang, Ding Shaolong, Zhu Binrong, Cai Jingming et al. (2026-01)
Bonding Performance of Toothed Interfaces in 3D Printed Alkali-Activated Concrete
- Meibodi Mania, Kamhawi Abdallah, Foroughi Dehnavi Ashkan, Li Yichuan (2026-01)
Non-Planar Slicing for High-Genus Surfaces with Non-Coplanar Interfaces
- Bang Jin, Ha Seong, Jun Yubin, Yim Hong (2025-12)
Optimal Casting Window Defined by Electrical Resistivity for Enhancing Interfacial Bond Strength in 3D Printed-Cast Concrete Composites
- Luo Xiaoyu, Zhao Yuqi, Yang Min, Yao Xiaofei et al. (2025-12)
Introducing Cement Composite Agents During Printing Process to Enhance the 3D-Printed Concrete Interfaces Between Layers and Filaments
- Li Shiping, Sun Yan, Qian Ye, Chen Wujun et al. (2025-11)
Bio-Inspired Jigsaw-Interlocking Suture Interfaces for Enhanced Flexural Response of 3D-Printed Strain-Hardening Cementitious Composites
- Xu Shuhao, Lin Xing-Tao, Chen Xiangsheng (2025-11)
Numerical Investigation of Anisotropic in 3D Printed Concrete Specimens Considering the Effects of Weak Interfaces and Pore-Induced Defects
- Zhang Chao, Zhu Xiaohong, Li Muduo, Zhang Yuying et al. (2025-10)
Enhancing Interface Adhesion of 3D Printable Concrete by Biochar Integration
- Miri Zahra, Baaj Hassan, Polak Maria (2025-10)
Exploring Interfaces in 3D-Printed Concrete Through Cohesive Zone Modelling
- Liu Renlong, Tang Jiyu, Feng Hu, Cheng Zhangqi (2025-09)
Study on the Instability of Early Age 3D Printing Cement-Based Structure:
Considering the Influence of Interface
- Yang Rijiao, Xu Chengji, You Xiufei, Li Xinze et al. (2025-09)
Saddle Stitching-Enabled Interfacial Toughening in 3D Printed Concrete
- Zhang Yi, Ren Qiang, Tittelboom Kim, Schutter Geert et al. (2025-09)
Layer Interface in 3D Printed Cement-Based Materials:
Heterogeneous Phase Distribution and New Insights into Formation Mechanism
- Tian Xin, Shi Anqi, Fang Zhi, Lin Alexander (2025-09)
Multi-Interface Effects on Mechanical Behavior in 3D-Printed Concrete Shear Keys:
A Finite Element Modeling Strategy
- Lin Manfang, Ding Yao, Yu Fan, Li Lingzhi et al. (2025-08)
Synergistic Strengthening of 3D‑printed ECC Beams Through Steel-Wire Mesh and Interfaces Treatments
- Miri Zahra, Aurilio R., Polak Maria, Baaj Hassan (2025-08)
Interface Bonding in 3D-Printed Concrete:
Experimental Evaluation and Numerical Modeling
- Dong Liang, Wu Chengqing, Liu Zhongxian, Wu Pengtao et al. (2025-07)
Chloride Transport Anisotropy and Interfacial Degradation in 3D-Printed Ultra-High-Performance Concrete:
Multi-Scale Evaluation and Engineering Implications
- Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-06)
Enhancing Interfacial Bonding and Pore Structure Optimization in 3D-Printed High-Strength ECC with Steel-PE Hybrid Fibers
- Duan Yuhang, Wang Chuan, Yin Binbin, Liew Kim (2025-06)
Modeling Interfacial Failure in 3D-Printed Concrete via Peridynamics
- Chen Meng, Sun Hao, Wang Yuting, Zhang Tong (2025-05)
Relationship Between Interfacial Pore Structure and Anisotropic Dynamic Splitting Behaviour of 3D Printed Engineered Cementitious Composites
- Munemo Rue, Kruger Jacques, Zijl Gideon (2025-05)
Surface Treatment of 3DPC Interlayers with Silicate-Based Solution for Enhanced Interfacial Bonding
- Lucen Hao, Hanxiong Lyu, Huanghua Zhang, Shipeng Zhang et al. (2025-05)
Development of CO2-Activated Interface Enhancer to Improve the Interlayer Properties of 3D-Printed Concrete
- Luo Xiaoyu, Zhao Yuqi, Yao Xiaofei, Zou Cunjun et al. (2025-05)
3D Printing Concrete Interface Treatment Based on Physical and Chemical Methods:
A Review
- An Ning, Wang Huai, Wang Peijun, Xu Chuanhua et al. (2025-04)
Tension-Compression Anisotropic Cohesion Model for the Interlayer Interface of 3D-Printed Concrete Compression Specimens
- Liu Chuanbei, Zou Mengtong, Chen Xuemei, Deng Yongjun et al. (2025-04)
Feasibility Study of 3D-Printed Rubberized Concrete as a Permanent Formwork:
Mechanical Properties, Interlayer Interface and Durability
- Jiang Youbau, Liu Yan, Zhang Zupan, Gao Pengxiang et al. (2025-03)
Tensile Performance of Interlayer Interface of Interlocking 3D Printed Concrete with Single Toothlike Nozzle
- Shahzad Qamar, Li Fangyuan (2025-03)
Influence of Concrete Interfaces on the Damage and Pull-Out Behavior of 3D-Printed Concrete Structures
- Shazad Qamar, Li Fangyuan (2025-01)
Interfacial Bond-Effects on Shear-Strength and Damage in 3D Printed Concrete Structures:
A Combined Experimental and Numerical Study
- Shahzad Qamar, Li Fangyuan (2025-01)
Impact of Concrete Interfaces on the Mechanical Performance of 3D Printed Concrete Structures
- Bai Meiyan, Xiao Jianzhuang, Ding Tao, Yu Kequan (2024-12)
Interfacial Bond-Properties Between 3D Printed Engineered Cementitious Composite and Post-Cast Concrete
- Luo Surong, Li Wenqiang, Cai Yili, Zhang Kaijian (2024-12)
Effects of Carbonated Recycled Sand on the Interfacial Bonding Performance of 3D Printed Cement-Based Material
- Taleb Maria, Bulteel David, Montagne Alex, Roudet Francine et al. (2024-11)
Influence of Thermo-Hygrometric Conditions on the Interface Bond in 3D Printed Concrete
- Zhang Yi, Tao Yaxin, Godinho Jose, Ren Qiang et al. (2024-11)
Layer Interface Characteristics and Adhesion of 3D Printed Cement-Based Materials Exposed to Post-Printing Temperature Disturbance
- Anton Ana-Maria, Skevaki Eleni, Bischof Patrick, Reiter Lex et al. (2024-11)
Column-Slab Interfaces for 3D Concrete Printing:
Design, Fabrication and Assembly Strategies
- Lan Tian, Yang Shutong, Xu Mingqi, Chen Zhengyuan et al. (2024-10)
Quantitative Assessment of Interfacial-Fracture-Properties in 3D Printed Alkali-Activated Recycled Sand Concrete Based on a Closed-Form Fracture-Model
- Subramaniam Kolluru, Paritala Spandana, Kulkarni Omkar, Thakur Manideep (2024-09)
Fracture in 3D Printed Concrete Beams:
Deflection and Penetration of Impinging Cracks at Layer Interfaces
- Cao Jing, Shengzhao E., Yang Yi, Shi Yaming et al. (2024-09)
A Strategy for the Improvement of the Bonding Performance of 3D Printed Concrete Inter-Layer Interfaces
- Gerong Wangdui, Wang Pengfei, Liao Minmao, Chen Zhaohui et al. (2024-07)
Interfacial Cracking at Layer and Filament Interfaces of 3D Printed Concrete:
Experimental and Numerical Studies
- He Lewei, Chen Bingzhi, Liu Qimin, Chen Hao et al. (2024-07)
A Quasi-Exponential Distribution of Interfacial Voids and Its Effect on the Inter-Layer Strength of 3D Printed Concrete
- Dong Liang, Yang Yekai, Liu Zhongxian, Zhang Yan et al. (2024-06)
Interface Bonding Characteristics of 3D Printed Ultra-High-Performance Concrete After Elevated Temperatures
- Yuan Yong, Wang Xiaoyun, Zhang Jiao-Long, Tao Yaxin et al. (2024-05)
The Shear Strength of the Interface Between Artificial Rock and Printed Concrete at Super Early-Ages
- Sun Chang, Zhao Haiye, Liu Qiong, Pan Feng (2024-04)
Shear Behavior of 3DPM-NM Specimens with Different Interfacial Locking Designs
- Wijaya Ignasius, Kreiger Eric, Masud Arif (2024-03)
Modeling of Concrete Printing Process with Frictional Interface
- Tao Yaxin, Zhang Yi, Schutter Geert, Tittelboom Kim (2024-01)
Interfacial Bonding of 3D Printable Concrete with Chemically Reactive Coating for Automatic Repair
- Tao Yaxin, Zhang Yi, Wang Xiaoyun, Godinho Jose et al. (2024-01)
Adhesion Evaluation and Interface Characterization of 3D Printed Concrete for Automatic Repair
- Wang Li, Wang Fucheng, Li Rong, Wang Qiao (2023-12)
Interfacial Constitutive Model of 3D Printed Fiber-Reinforced Concrete Composites and Its Experimental Validation
- Qiu Minghong, Sun Yan, Qian Ye (2023-12)
Interfacial Bonding Performance of 3D Printed Ultra-High-Performance Strain-Hardening Cementitious Composites and Cast Normal Concrete
- Liu Huawei, Liu Chao, Zhang Yamei, Bai Guoliang (2023-11)
Bonding Properties Between 3D Printed Coarse Aggregate Concrete and Rebar Based on Interface Structural Characteristics
- Paritala Spandana, Kamakshi Tippabhotla, Subramaniam Kolluru (2023-09)
Influence of Inter-Layer Interfaces on Fracture Behavior of 3D Printed Concrete
- Chen Yidong, Zhang Yu, Liu Zhiyong, Zhang Yunsheng et al. (2023-04)
3D Printed Concrete Permanent Formwork:
Effect of Post-Cast Concrete Proportion on Interface Bonding
- Taleb Maria, Bulteel David, Betrancourt Damien, Roudet Francine et al. (2023-04)
Interfacial Weakness Criterion by Indentation in 3D Printed Concrete
- Wang Ziyue, Chen Zixuan, Xiao Jianzhuang, Ding Tao (2023-03)
Experimental Study on Interfacial Shear Behavior of 3D Printed Recycled Mortar
- Luo Surong, Lin Qian, Xu Wei, Wang Dehui (2023-03)
Effects of Interval Time and Interfacial Agents on the Mechanical Characteristics of Ultra-High-Toughness Cementitious Composites Under 3D Printed Technology
- Taleb Maria, Bulteel David, Betrancourt Damien, Roudet Francine et al. (2023-01)
Multi-Scale Mechanical Characterization of the Interface in 3D Printed Concrete
- Zhao Kang, Hu Zhongjun, Wang Boxin, Li Quanheng et al. (2023-01)
Effect of Roughness and Adhesive on the Strength of Concrete-to-Concrete Interfaces Cast from 3D Printed Prefabricated Plastic Formworks
- Surehali Sahil, Tripathi Avinaya, Nimbalkar Atharwa, Neithalath Narayanan (2023-01)
Anisotropic Chloride Transport in 3D Printed Concrete and Its Dependence on Layer-Height and Interface-Types
- Bischof Patrick, Mata-Falcón Jaime, Ammann Rebecca, Näsbom Andreas et al. (2022-12)
Digitally Fabricated Weak Interfaces to Reduce Minimum Reinforcement in Concrete Structures
- Wang Li, Yang Yu, Hu Yuanyuan, Ma Guowei (2022-11)
Interfacial Properties of Three-Dimensional-Printed Permanent Formwork with Cast-in-Place Concrete
- He Lewei, Li Hua, Chow Wai, Zeng Biqing et al. (2022-09)
Increasing the Inter-Layer Strength of 3D Printed Concrete with Tooth-Like Interface:
An Experimental and Theoretical Investigation
- Slepicka Martin, Vilgertshofer Simon, Borrmann André (2022-07)
Fabrication Information Modeling:
Interfacing Building Information Modeling with Digital Fabrication
- Das Arnesh, Aguilar Sanchez Asel, Wangler Timothy, Flatt Robert (2022-06)
Freeze-Thaw-Performance of 3D Printed Concrete:
Influence of Interfaces
- Yuan Qiang, Xie Zonglin, Yao Hao, Huang Tingjie et al. (2022-06)
Effect of Polyacrylamide on the Workability and Inter-Layer Interface Properties of 3D Printed Cementitious Materials
- Cao Xiangpeng, Yu Shiheng, Zheng Dapeng, Cui Hongzhi (2022-06)
Nail-Planting to Enhance the Interface Bonding Strength in 3D Printed Concrete
- Liu Jianan, Wang Zhenjun, Zhao Xin, Yu Cong et al. (2022-03)
Quantitative Evaluations on Influences of Aggregate Surface Texture on Interfacial Adhesion Using 3D Printing Aggregate
- Wang Li, Yang Yu, Yao Liang, Ma Guowei (2022-02)
Interfacial Bonding Properties of 3D Printed Permanent Formwork with the Post-Casted Concrete
- Raval Amitkumar, Patel C. (2022-02)
Estimation of Interface-Friction and Concrete-Boundary-Layer for 3D Printable Concrete-Pumping
- Geng Zifan, Wu Peipei, Pan Hao, Zheng Qi et al. (2022-01)
Robust Layer Interface in Cement Additive Manufacturing via Silicate-Penetration and Precipitation
- Wang Hailong, Shao Jianwen, Zhang Jing, Zou Daoqin et al. (2021-11)
Bond Shear Performances and Constitutive Model of Interfaces Between Vertical and Horizontal Filaments of 3D Printed Concrete
- Napolitano Rosanna, Forni Daniele, Menna Costantino, Asprone Domenico et al. (2021-11)
Dynamic Characterization of the Layer-Interface Properties of 3D Printed Concrete Elements
- Liu Xuanting, Sun Bohua (2021-11)
The Influence of Interface on the Structural Stability in 3D Concrete Printing Processes
- Xiao Jianzhuang, Chen Zixuan, Ding Tao, Zou Shuai (2021-10)
Bending Behavior of Steel-Cable-Reinforced 3D Printed Concrete in the Direction Perpendicular to the Interfaces
- Wang Li, Liu Yi, Yang Yu, Li Yanfeng et al. (2021-04)
Bonding Performance of 3D Printing Concrete with Self-Locking Interfaces Exposed to Compression-Shear and Compression-Splitting Stresses
- Vespalec Arnošt, Novák Josef, Kohoutková Alena, Vosynek Petr et al. (2020-11)
Interface Behavior and Interface Tensile Strength of a Hardened Concrete Mixture with a Coarse Aggregate for Additive Manufacturing
- Geng Zifan, She Wei, Zuo Wenqiang, Lyu Kai et al. (2020-09)
Layer-Interface Properties in 3D Printed Concrete:
Dual Hierarchical Structure and Micromechanical Characterization
- Napolitano Rosanna, Menna Costantino, Asprone Domenico, Giudice Lorenzo (2020-07)
Mechanical Characterization of Layer-by-Layer Interface in Concrete Elements Obtained by Additive Manufacturing
- Assaad Joseph, Hamzeh Farook, Hamad Bilal (2020-05)
Qualitative Assessment of Interfacial Bonding in 3D Printing Concrete Exposed to Frost-Attack
- Sakka Fatima, Assaad Joseph, Hamzeh Farook, Nakhoul Charbel (2019-07)
Thixotropy and Interfacial Bond Strengths of Polymer-Modified Printed Mortars
- Ducoulombier Nicolas (2019-06)
Characterisation and Modelling of Interfacial-Damage in Fiber-Reinforced Concrete for 3D Printing in Construction
- Valle‐Pello P., Álvarez‐Rabanal Felipe, Alonso‐Martínez M., Coz Díaz J. (2019-05)
Numerical Study of the Interfaces of 3D Printed Concrete Using Discrete Element Method
- Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing
- Craipeau Typhanie, Lecompte Thibault, Toussaint Fabrice, Perrot Arnaud (2018-09)
Evolution of Concrete-Formwork Interface in Slipforming Process
- Braumann Johannes, Brell-Cokcan Sigrid (2012-12)
Digital and Physical Tools for Industrial Robots in Architecture:
Robotic Interaction and Interfaces