Skip to content

#use

Keywords by Co - Occurrence

  1. Liu Xuelin, Kong Jiafeng, Chen Yidong, Wang Liang et al. (2025-12)
    Rheology and Printability Control of Low-Carbon 3D-Printed Cementitious Materials via Circular Use of Recycled Concrete Powder
  2. Akgümüş Fatih, Şahin Hatice, Mardani Ali (2025-10)
    Investigation of Waste Steel Fiber Usage Rate and Length Change on Some Fresh State Properties of 3D Printable Concrete Mixtures
  3. Jankovský Ondřej, Lodňánek Petr, Lauermannová Anna-Marie, Jiříčková Adéla et al. (2025-08)
    Use of Ladle Furnace Slag as Filler Replacement in Magnesium Oxychloride Cement:
    Towards Sustainable 3D-Printable Building Composites
  4. Amdouni Marwen, Nasraoui Helmi, Rezgui Mohamed, Trabelsi Ali (2025-07)
    Use of the RDPP-SF Method to Analyze Rheology Variation in an AM-Cement-Based Process
  5. Chen Yanjuan, Cheikh Khadija, Rahier Hubert (2025-07)
    Methodology for the Design and Optimization of Potassium Silicate-Activated Slag Used as the Binder of 3D Printable Materials
  6. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John et al. (2025-06)
    Advancing the Field of 3D Concrete Printing by Exploring the Use of Eco-Friendly Mortars
  7. Over Derya, Ozbakan Nesil (2025-04)
    Effect of Recycled Aggregate Use on the Fresh State Properties of Limestone Calcined Clay Cement (LC3) Mortars
  8. Pederson Federico, Ellersick Liam, Kim Heejeong (2025-04)
    A Review of Lunar Regolith Based Alkali Activated Materials and Sintered Regolith for Use as a Construction Material
  9. Pepe Marco, Lombardi Rosario, Lima Carmine, Paolillo Bruno et al. (2025-01)
    Experimental Evidence on the Possible Use of Fine Concrete and Brick Recycled Aggregates for 3D Printed Cement-Based Mixtures
  10. Shilton Robert, Wang Shen, Banthia Nemkumar (2024-12)
    Use of Polysaccharides as a Rheology-Modifying-Admixture for Alkali-Activated Materials for 3D Printing
  11. Sikora Paweł, Rathnarajan Sundar, Federowicz Karol, Techman Mateusz et al. (2024-11)
    Use of Seawater as an Accelerator in 3D Printed Concrete
  12. Venugopal Reddy P., Nakkeeran G., Roy Dipankar, Alaneme George (2024-11)
    Evaluating the Use of Recycled Fine Aggregates in 3D Printing:
    A Systematic Review
  13. Wysoczanski Andrzej (2024-10)
    The Use of Additively Manufactured Concrete Objects
  14. Schweizer Katie, Bhandari Sunil, Lopez-Anido Roberto, Korey Matthew et al. (2024-09)
    Recycling Large-Format 3D Printed Polymer Composite Formworks Used for Casting Pre-Cast Concrete:
    Technical Feasibility and Challenges
  15. Licen Jurij, Chen Taole (2024-09)
    Use of Genetic Optimization-Algorithms in the Design of 3D Concrete Printed Shell-Structures
  16. Farra Ramzi, Mazanec Oliver, Ducoulombier Nicolas, Mallet Alban (2024-09)
    Toward the Optimal Use of Local Cementitious Materials Through Novel Admixture-Technology and a Dedicated 2K-Printing-System
  17. Kreiger Eric, Kreiger Megan, MacAllister Bruce, Wood Tanner et al. (2024-09)
    The Use of Additive Construction in All Structural Components of a Building
  18. Zargayouna Habib, Paquet Elodie, Mabrouki Tarek, Hamdi Essaieb et al. (2024-09)
    Analysis of the Effect of Substituting Cement with Marble-Powder on the Mortar Characteristics Used in 3D Printing
  19. Diggs-McGee Brandy, Kreiger Megan, Kreiger Eric, Negron-McFarlane Christian (2024-09)
    Case Study on the Use of Thermographic Analysis to Evaluate an Additively Constructed Building
  20. Rodriguez Fabian, Foster Kyle, Fross Xavier, Schmidt Roty et al. (2024-09)
    Use of a Lignin-Based Admixture for Tailoring the Rheological Properties of Mortars for 3D Printing
  21. Klik Przemysław, Cisowski Adam, Rządkowski Witold, Pyrzanowski Paweł et al. (2024-08)
    Investigation of Mechanical Properties of Structures Created with Use of Automatically Reinforced 3D Concrete Printing:
    Preliminary Study
  22. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2024-07)
    Investigating the Interaction of Limestone-Calcined-Clay and OPC-Based Systems with a Methylhydroxyethyl-Cellulose-Based Viscosity-Modifier Used for 3D Printable Concrete
  23. Rubeis Tullio, Ciccozzi Annamaria, Giusti Letizia, Ambrosini Dario (2024-07)
    On the Use of 3D Printing to Enhance the Thermal Performance of Building Envelope:
    A Review
  24. Villiers Wibke, Mwongo Mwiti, Babafemi Adewumi, Zijl Gideon (2024-06)
    Quantifying Recycled Construction and Demolition Waste for Use in 3D Printed Concrete
  25. Coward Andy, Forsberg Torben (2024-04)
    Reconstruction of a Ukrainian Road Bridge by Use of 3D Printed minimass™ Beams
  26. Chen Mingxu, Xu Jiabin, Yuan Lianwang, Zhao Piqi et al. (2024-03)
    Use of Creep and Recovery-Protocol to Assess the Printability of Fiber-Reinforced 3D Printed White-Portland-Cement Composites
  27. Zhou Yiyi, Luo Haoran, Anand Kamal, Singh Amardeep et al. (2024-02)
    Sustainable Use of Ultrafine Recycled Glass in Additive Manufactured Reactive-Powder Concrete
  28. Wan Zhi, Xu Yading, He Shan, Schlangen Erik et al. (2024-01)
    The Use of Additive Manufacturing in Self-Healing Cementitious Materials:
    A State of the Art Review
  29. Qamar Mu'ath, Yaghmour Emad, Wang Xingjian, Naito Clay et al. (2023-12)
    Use of 3D Printed Concrete Components for Thermal Energy Storage
  30. Jesus Manuel, Teixeira João, Alves Jorge, Pessoa Ana Sofia et al. (2023-10)
    Potential Use of Sugarcane-Bagasse-Ash in Cementitious Mortars for 3D Printing
  31. Shahmirzadi Mohsen, Gholampour Aliakbar, Kashani Alireza, Ngo Tuan (2023-10)
    Geopolymer Mortars for Use in Construction 3D Printing:
    Effect of LSS, Graphene-Oxide and Nano-Clay at Different Environmental Conditions
  32. Olczyk Norbert, Skibicki Szymon, Gierszewska Natalia (2023-08)
    3D Printed Mortar with High Alumina-Cement as Alternative Solution for Standard Materials Used for 3D Printing
  33. Mani Aravindhraj, Muthukumar S., Sathyanarayanan K. (2023-08)
    Use of Alccofine 1203 as a Sustainable Supplementary Cementitious Material for Printable Concrete
  34. Chen Yu, Liang Minfei, Zhang Yu, Li Zhenming et al. (2023-02)
    Can Superabsorbent Polymers Be Used as Rheology-Modifiers for Cementitious Materials in the Context of 3D Concrete Printing
  35. Beersaerts Glenn, Hertel Tobias, Lucas Sandra, Pontikes Yiannis (2023-02)
    Promoting the Use of Fe-Rich Slag in Construction:
    Development of a Hybrid Binder for 3D Printing
  36. Diniz Hugo, Martinelli Antônio, Cabral Kleber, Ferreira Ruan et al. (2023-01)
    Synergistic Effects of the Use of Metakaolin, Sand and Water on the Properties of Cementitious Composites for 3D Printing
  37. Jesus Manuel, Costa Joana, Teixeira João, Pessoa Ana Sofia et al. (2023-01)
    Use of Waste Materials to Reduce Cement and Natural Aggregates in 3D Printing Mortars
  38. Tinoco Matheus, Gouvêa Lucas, Cássia Magalhães Martins Karenn, Toledo Filho Romildo et al. (2022-12)
    The Use of Rice Husk Particles to Adjust the Rheological Properties of 3D Printable Cementitious Composites Through Water Sorption
  39. Ahadi Bahram, Valiente López María (2022-11)
    Use of Nitinol-Shape Memory Alloy in the Reinforcement of 3D Concrete Printing Industry
  40. Tao Yaxin, Rahul Attupurathu, Mohan Manu, Tittelboom Kim et al. (2022-09)
    Blending Performance of Helical Static Mixer Used for Twin-Pipe 3D Concrete Printing
  41. Mir Namra, Khan Shoukat, Kul Anil, Şahin Oğuzhan et al. (2022-08)
    Life Cycle Assessment of Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing
  42. Sergis Vasileios, Ouellet-Plamondon Claudiane (2022-06)
    Fractional Factorial Design to Study Admixtures Used for 3D Concrete Printing Applications
  43. Gimenez-Carbo Ester, Torres Raquel, Coll Hugo, Roig-Flores Marta et al. (2022-04)
    Preliminary Study of the Fresh and Hard Properties of UHPC That Is Used to Produce 3D Printed Mortar
  44. Ranjan Rajeev, Kumar Deepak, Kundu Manoj, Chandra Moi Subhash (2022-03)
    A Critical Review on Classification of Materials Used in 3D Printing Process
  45. Dey Dhrutiman, Srinivas Dodda, Panda Biranchi, Suraneni Prannoy et al. (2022-02)
    Use of Industrial Waste-Materials for 3D Printing of Sustainable Concrete:
    A Review
  46. Tripathi Avinaya, Nair Sooraj, Neithalath Narayanan (2022-01)
    A Comprehensive Analysis of Buildability of 3D Printed Concrete and the Use of Bi-Linear Stress-Strain Criterion-Based Failure Curves Towards Their Prediction
  47. Pierson Matthew, Pinkerton Luke (2021-12)
    Direct Tension Testing of Plain and Fiber-Reinforced Concrete for Use in Additive Construction
  48. Douba AlaEddin, Kawashima Shiho (2021-11)
    Use of Nano-Clays and Methylcellulose to Tailor Rheology for Three-Dimensional Concrete Printing
  49. Uribe-Pinzon Sebastian, Mosquera Mariana, Cardenas-Pulido Jhon, Higuera Camilo (2021-10)
    Advances and Current Trends on the Use of 3D Printed Concrete for Building Fabrication
  50. Stoiber Nadine, Kromoser Benjamin (2021-09)
    Pushing Concrete Material-Usage to the Limit:
    Weight-Optimized, 3D Printed Concrete Girders with External Reinforcement
  51. Hierden Naomi, Gauvin Florent, Lucas Sandra, Salet Theo et al. (2021-06)
    Use of Hemp-Fibers in 3D Printed Concrete
  52. Anane Walid, Iordanova Ivanka, Ouellet-Plamondon Claudiane (2021-05)
    The Use of BIM for Robotic 3D Concrete Printing
  53. Şahin Oğuzhan, İlcan Hüseyin, Ateşli Anıl, Kul Anil et al. (2021-05)
    Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing
  54. Krčma Martin, Škaroupka David, Vosynek Petr, Zikmund Tomáš et al. (2021-02)
    Use of Polymer Concrete for Large-Scale 3D Printing
  55. Panda Biranchi, Sonat Cem, Yang En-Hua, Tan Ming et al. (2020-12)
    Use of Magnesium-Silicate-Hydrate (M-S-H) Cement Mixes in 3D Printing Applications
  56. Šavija Branko (2020-09)
    Use of 3D Printing to Create Multi-Functional Cementitious Composites:
    Review, Challenges and Opportunities
  57. Fioretti Marta, Kompella Sriram, Monte Francesco, Esposito Laura et al. (2020-07)
    Experimental Investigation on the Early-Age Tensile Strength of Fiber-Reinforced Mortar Used in 3D Concrete Printing
  58. Casagrande Lorenzo, Esposito Laura, Menna Costantino, Asprone Domenico et al. (2020-07)
    Mechanical Characterization of Cement-Based Mortar Used in 3DCP Including Early-Age Creep Effects
  59. Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2020-07)
    Use of the Chemical and Mineral Admixtures to Tailor the Rheology and the Green Strength of 3D Printing Cementitious Mixtures
  60. Rehman Atta, Lee Sang-Min, Kim Jung-Hoon (2020-06)
    Use of Municipal Solid-Waste Incineration-Ash in 3D Printable Concrete
  61. Guamán-Rivera Robert, García-Alvarado Rodrigo, Martínez-Rocamora Alejandro, Cheein Fernando (2020-05)
    A Comprehensive Performance Evaluation of Different Mobile Manipulators Used as Displaceable 3D Printers of Building Elements for the Construction Industry
  62. Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2020-05)
    Effectiveness of the Rheometric Methods to Evaluate the Build-Up of Cementitious Mortars Used for 3D Printing
  63. Hoffmann Marcin, Skibicki Szymon, Pankratow Paweł, Zieliński Adam et al. (2020-04)
    Automation in the Construction of a 3D Printed Concrete Wall with the Use of a Lintel Gripper
  64. Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2020-01)
    Investigation of the Properties of Alkali-Activated Slag Mixes Involving the Use of Nano-Clay and Nucleation-Seeds for 3D Printing
  65. Jayathilakage Roshan, Sanjayan Jay, Rajeev Pathmanathan (2019-12)
    Comparison of Rheology Measurement Techniques Used in 3D Concrete Printing Applications
  66. Kim Kwan, Yeon Jaeheum, Lee Hee, Yeon Jung (2019-08)
    Dimensional Stability of SBR-Modified Cementitious Mixtures for Use in 3D Additive Construction
  67. Panda Biranchi, Unluer Cise, Tan Ming (2019-08)
    Extrusion and Rheology Characterization of Geopolymer Nanocomposites Used in 3D Printing
  68. Kim Kwan, Yeon Jaeheum, Lee Hee, Yeon Kyu-Seok (2019-08)
    Feasibility Study of SBR-Modified Cementitious Mixtures for Use as 3D Additive Construction Materials
  69. Yeon Kyu-Seok, Kim Kwan, Yeon Jaeheum, Lee Hee (2019-07)
    Fresh Properties of EVA-Modified Cementitious Mixtures for Use in Additive Construction by Extrusion
  70. Liu Zhixin, Li Mingyang, Weng Yiwei, Wong Teck et al. (2018-12)
    Mixture-Design-Approach to Optimize the Rheological Properties of the Material Used in 3D Cementitious Material-Printing
  71. Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2018-11)
    Improving the 3D Printability of High-Volume Fly-Ash Mixtures via the Use of Nano-Attapulgite-Clay
  72. Yeon Kyu-Seok, Kim Kwan, Yeon Jaeheum (2018-05)
    Feasibility Study of the Use of Polymer-Modified Cement Composites as 3D Concrete Printing-Material
  73. Khalil Noura, Aouad Georges, Cheikh Khadija, Rémond Sébastien (2017-09)
    Use of Calcium-Sulfoaluminate-Cements for Setting-Control of 3D Printing Mortars
  74. Shakor Pshtiwan, Sanjayan Jay, Nazari Ali, Nejadi Shami (2017-02)
    Modified 3D Printed Powder to Cement-Based Material and Mechanical Properties of Cement Scaffold Used in 3D Printing
  75. Sobotka Anna, Pacewicz Katarzyna (2016-10)
    Building Site Organization with 3D Technology in Use
  76. Qian Ye, Kawashima Shiho (2016-09)
    Use of Creep Recovery Protocol to Measure Static Yield-Stress and Structural Rebuilding of Fresh Cement-Pastes
  77. Wu Peng, Wang Jun, Wang Xiangyu (2016-04)
    A Critical Review of the Use of 3D Printing in the Construction Industry
  78. Perrot Arnaud, Rangeard Damien, Pierre Alexandre (2015-02)
    Structural Build-Up of Cement-Based Materials Used for 3D Printing-Extrusion-Techniques
  79. Perrot Arnaud, Mélinge Yannick, Rangeard Damien, Micaelli Francesca et al. (2012-06)
    Use of Ram Extruder as a Combined Rheo-Tribometer to Study the Behavior of High-Yield-Stress Fluids at Low Strain-Rate
  80. Buswell Richard, Thorpe Tony, Soar Rupert, Gibb Alistar (2008-05)
    Design, Data and Process Issues for Mega-Scale Rapid Manufacturing Machines Used for Construction