Skip to content

#stress

Keywords by Co - Occurrence

  1. Fasihi Ali, Libre Nicolas (2025-11)
    Tip Penetration Test for Rapid in-Line Assessment of Static Yield Stress During 3D Concrete Printing Process
  2. Marco Giancarlo, Yau Ho, Lombardi Davide (2025-10)
    Stress-Informed Non-Planar Slicing for 3D Concrete Printing
  3. Xia Kailun, Chen Yuning, Jia Lutao, Quan Shitao et al. (2025-10)
    The Impact of Internal Stress Generated During the Printing Process on the Early-Age Properties of 3D Printed Concrete
  4. Cisowski Adam, Kowalik Michał (2025-06)
    The Influence of the Cross-Sectional Geometry on Stress Concentration in 3D Printed Concrete Elements:
    A Preliminary Study
  5. Fasihi Ali, Libre Nicolas (2025-05)
    Towards Accurate In-Situ Static Yield Stress Measurement for 3D Concrete Printing:
    A Study on Novel Fast Penetration Test
  6. Sun Yuhang, Wang Haonan, Zhang Yi, Liu Xiongfei et al. (2025-05)
    Spray-Based 3D Printed Foam Concrete:
    Stress Concentration Relieve Utilization
  7. Vlieger Jentel, Blaakmeer Jan, Gruyaert Elke, Cizer Özlem (2025-01)
    Assessing Static and Dynamic Yield-Stress of 3D Printing Mortar with Recycled Sand:
    Influence of Sand-Geometry, Fineness Modulus, and Water-to-Binder Ratio
  8. Guan Jingyuan, Wang Li, Huang Yimiao, Ma Guowei (2024-12)
    3D Printed Concrete Composite Slabs Fabricated by Pre-Stressed Reinforced Permanent Formwork:
    Design, Manufacturing, and Performance
  9. Lu Haoyu, Zhang Lizhi, Wang Junkai, Shi Zhaoxin et al. (2024-11)
    Penetration-Test of Sheet-Like Indenter for Yield-Stress-Assessment of 3D Printed Concrete
  10. Ji Yianliang, Pott Ursula, Mezhov Alexander, Rößler Christiane et al. (2024-11)
    Modelling and Experimental Study on Static Yield-Stress-Evolution and Structural Build-Up of Cement-Paste in Early-Stage of Cement Hydration
  11. Pfleger Marc-Patrick, Sam Nina, Radl Elisabeth, Vill Markus (2024-09)
    Data-Driven Design-Process and Production of Stress-Optimized Concrete Girders with Integrated Tendons Using 3D Printing
  12. Shakur Emad, Shaked Adaya, Amir Oded (2024-09)
    Topology and Shape-Optimization of 3D Pre-Stressed Concrete Structures
  13. Rehman Atta, Kang Seungwoo, Kim Jung-Hoon (2024-09)
    Nozzle-Integrated Slump-Scanner-Test:
    Development of an Automated Shape-Stability and Instantaneous Yield-Stress-Measurement-Method for the Set-on-Demand 3D Concrete Printing
  14. Zat Tuani, Schmitt Duarte Ester, Webber Jaine, Matos Paulo et al. (2024-09)
    Comparison Between Yield-Stress-Measurements for Fiber-Reinforced 3D Concrete Printing
  15. Ravindran Vishwanath, Ranganathan Thiyagarajan, Rahul Attupurathu (2024-08)
    Migration of Particles Suspended in Yield-Stress Fluids:
    Insights from Numerical Simulation of Pipe Flow of 3D Printable Concrete
  16. Liu Chao, Zhang Zedi, Jia Zijian, Cao Ruilin et al. (2024-07)
    Quantitative Characterization of Bubble-Stability of Foam-Concrete Throughout Extrusion-Process:
    From Yield-Stress , Viscosity and Surface Tension Point of View
  17. Breseghello Luca, Hajikarimian Hamed, Naboni Roberto (2024-05)
    3DLightSlab:
    Design to 3D Concrete Printing Workflow for Stress-Driven Ribbed Slabs
  18. Pfleger Marc-Patrick, Radl Elisabeth, Esebali Osman, Vill Markus (2024-04)
    Load Bearing Behavior of 3D Printed Pre-Stressed Segmental Concrete Girders
  19. Skibicki Szymon, Szewczyk Piotr, Majewska Julia, Sibera Daniel et al. (2024-03)
    The Effect of Inter-Layer Adhesion on Stress-Distribution in 3D Printed Beam Elements
  20. Duan Zhenhua, Deng Qi, Xiao Jianzhuang, Lv Zhenyuan et al. (2024-01)
    Experimental Realization on Stress-Distribution Monitoring During 3D Concrete Printing
  21. Raza Saim, Triantafyllidis Zafiris, Anton Ana-Maria, Dillenburger Benjamin et al. (2024-01)
    Seismic Performance of Fe-SMA Pre-Stressed Segmental Bridge Columns with 3D Printed Permanent Concrete Formwork
  22. Auer Daniel, Bos Freek, Olabi Mohammad, Fischer Oliver (2023-10)
    Fiber-Reinforcement of 3D Printed Concrete by Material-Extrusion-Tool-Paths Aligned to Principal Stress-Trajectories
  23. Chang Ze, Liang Minfei, He Shan, Schlangen Erik et al. (2023-09)
    Lattice-Modelling of Early-Age Creep of 3D Printed Segments with the Consideration of Stress-History
  24. Geffrault Anatole, Bessaies-Bey Hela, Roussel Nicolas, Coussot Philippe (2023-08)
    Printing by Yield-Stress Fluid-Shaping
  25. Geng Songyuan, Long Wujian, Luo Qiling, Fu Junen et al. (2023-07)
    Intelligent Prediction of Dynamic Yield-Stress in 3D Printing Concrete Based on Machine Learning
  26. Mu Ru, Mei Shaolin, Wang Xiaowei, Chen Xiangshang et al. (2023-06)
    Mechanical Properties of a 3D Printed SFRC Beam with Steel-Fiber-Distribution Adaptive to Tensile Stress
  27. Liu Chao, Zhang Yamei, Banthia Nemkumar (2023-05)
    Unveiling Pore Formation and Its Influence on Micromechanical Property and Stress-Distribution of 3D Printed Foam-Concrete Modified with Hydroxypropyl-Methylcellulose and Silica-Fume
  28. Mollah Md., Comminal Raphaël, Serdeczny Marcin, Šeta Berin et al. (2023-05)
    Computational Analysis of Yield-Stress-Buildup and Stability of Deposited Layers in Material-Extrusion Additive Manufacturing
  29. Jipa Mihail-Andrei, Reiter Lex, Flatt Robert, Dillenburger Benjamin (2022-07)
    Environmental Stress Cracking of 3D Printed Polymers Exposed to Concrete
  30. Chang Ze, Wan Zhi, Xu Yading, Schlangen Erik et al. (2022-06)
    Convolutional Neural Network for Predicting Crack-Pattern and Stress-Crack-Width Curve of Air-Void Structure in 3D Printed Concrete
  31. Ruffray Nicolas, Reiter Lex, Flatt Robert (2022-04)
    Overcoming Environmental Stress-Cracking of FDM 3D Printed Formwork for Counter-Pressure Casting of Concrete
  32. Zhang Chao, Deng Zhicong, Chen Chun, Zhang Yamei et al. (2022-03)
    Predicting the Static Yield-Stress of 3D Printable Concrete Based on Flowability of Paste and Thickness of Excess-Paste-Layer
  33. Tripathi Avinaya, Nair Sooraj, Neithalath Narayanan (2022-01)
    A Comprehensive Analysis of Buildability of 3D Printed Concrete and the Use of Bi-Linear Stress-Strain Criterion-Based Failure Curves Towards Their Prediction
  34. Nair Sooraj, Li Anling, Mobasher Barzin, Neithalath Narayanan (2021-12)
    Effect of Layer-Height on Tensile Stress-Distribution and Crack-Width and Propagation in 3D Printed Fiber-Reinforced Flexural Elements
  35. Pott Ursula, Stephan Dietmar (2021-04)
    Penetration-Test as a Fast Method to Determine Yield-Stress and Structural Build-Up for 3D Printing of Cementitious Materials
  36. Wang Li, Liu Yi, Yang Yu, Li Yanfeng et al. (2021-04)
    Bonding Performance of 3D Printing Concrete with Self-Locking Interfaces Exposed to Compression-Shear and Compression-Splitting Stresses
  37. Zhan Qiang, Zhou Xinjie, Yuan Philip, Zhou Xinjie (2021-04)
    Design and Fabrication of a 3D Concrete Printed Pre-Stressed Bridge
  38. Lim Jian, Zhang Xu, Ting Guan, Pham Quang-Cuong (2021-02)
    Stress-Cognizant 3D Printing of Free-Form Concrete Structures
  39. Kinomura Koji, Murata Satoshi, Yamamoto Yujin, Obi Hirotoshi et al. (2020-07)
    Application of 3D Printed Segments Designed by Topology-Optimization-Analysis to a Practical-Scale Pre-Stressed Pedestrian Bridge
  40. Ducoulombier Nicolas, Carneau Paul, Mesnil Romain, Demont Léo et al. (2020-07)
    The Slug-Test:
    In-Line-Assessment of Yield-Stress for Extrusion-Based Additive Manufacturing
  41. Sergis Vasileios, Charrier Malo, Ouellet-Plamondon Claudiane (2020-07)
    Prediction of the Yield-Stress of Printing Mortar-Ink
  42. Zongo Karim, Charrier Malo, Duval Corentin, Ouellet-Plamondon Claudiane (2020-07)
    Dynamic and Static Yield-Stress Determination of Cementitious Paste with Admixtures
  43. He Lewei, Chow Wai, Li Hua (2020-06)
    Effects of Inter-Layer Notch and Shear Stress on Inter-Layer Strength of 3D Printed Cement-Paste
  44. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2020-04)
    Mastering Yield-Stress-Evolution and Formwork-Friction for Smart Dynamic Casting
  45. Chen Mingxu, Yang Lei, Zheng Yan, Huang Yongbo et al. (2020-04)
    Yield-Stress and Thixotropy-Control of 3D Printed Calcium-Sulfoaluminate Cement Composites with Metakaolin Related to Structural Build-Up
  46. Ivanova Irina, Mechtcherine Viktor (2020-03)
    Effects of Volume Fraction and Surface Area of Aggregates on the Static Yield-Stress and Structural Build-Up of Fresh Concrete
  47. Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2020-01)
    Yield-Stress-Criteria to Assess the Buildability of 3D Concrete Printing
  48. Roussel Nicolas, Bessaies-Bey Hela, Kawashima Shiho, Marchon Delphine et al. (2019-08)
    Recent Advances on Yield-Stress and Elasticity of Fresh Cement-Based Materials
  49. Vantyghem Gieljan, Boel Veerle, Corte Wouter, Steeman Marijke (2018-09)
    Compliance, Stress-Based and Multi-Physics Topology-Optimization for 3D Printed Concrete Structures
  50. Qian Ye, Schutter Geert (2018-04)
    Different Effects of NSF and PCE Superplasticizer on Adsorption, Dynamic Yield-Stress and Thixotropy of Cement-Pastes
  51. Qian Ye, Kawashima Shiho (2016-09)
    Use of Creep Recovery Protocol to Measure Static Yield-Stress and Structural Rebuilding of Fresh Cement-Pastes
  52. Perrot Arnaud, Mélinge Yannick, Rangeard Damien, Micaelli Francesca et al. (2012-06)
    Use of Ram Extruder as a Combined Rheo-Tribometer to Study the Behavior of High-Yield-Stress Fluids at Low Strain-Rate