Skip to content

#particle

Keywords by Co - Occurrence

  1. Ferrara Liberato, Rizzieri Giacomo, Cremonesi Massimiliano (2025-12)
    A Particle Fluid Dynamics Modelling Approach to Design 3D Concrete Printing Materials and Processes
  2. Cai Xianhuan, Chen Fan, Zhao Zhihui, Xiao Peng et al. (2025-12)
    Impact of Early Particle Characteristics on Rheology and Buildability in 3D-Printed Magnesium Silicon Potassium Phosphate Cement Incorporating Fly Ash
  3. Meier Niklas, Herding Friedrich, Zetzener Harald, Mai (née Dressler) Inka et al. (2025-11)
    Surface Modification of Bulk Material for Particle Bed 3D Concrete Printing:
    Effect on Wettability, Porosity, and Mechanical Properties
  4. Rizzieri Giacomo, Meni Simone, Cremonesi Massimiliano, Ferrara Liberato (2025-07)
    A Particle Finite Element Method for Investigating the Influence of Material and Process Parameters in 3D Concrete Printing
  5. Zhang Bo, Corte Wouter, Ooms Ticho, Wan-Wendner Roman (2025-05)
    Mechanical Properties of Particle-Bed 3D Printed Concrete Infill Patterns
  6. An Dong, Rahman Mahfuzur, Zhang Y., Yang Chunhui (2025-05)
    Effects of Key 3D Concrete Printing Process Parameters on Layer Shape:
    Experimental Study and Smooth Particle Hydrodynamics Modelling
  7. Xiong Baocheng, Liu Huanbao, Nie Ping, Li Xiaoxi et al. (2025-04)
    Effect of Different Surface Modification Methods of Small Particle Size Recycled Rubber Powder on Mechanical Properties of 3D Printed Concrete
  8. Ayhan Bahar, Irizarry Elmer, Lale Erol, Yu Ke et al. (2025-04)
    Numerical Simulation of 3D Printed Ultra High-Performance Concrete Using the Lattice Discrete Particle Model
  9. Wang Hailong, Shen Wenbin, Sun Xiaoyan, Song Xinlei et al. (2025-01)
    Influences of Particle-Size on the Performance of 3D Printed Coarse Aggregate Concrete:
    Experiment, Microstructure, and Mechanism Analysis
  10. Brunner Kim, Stengel Thorsten, Kustermann Andrea (2025-01)
    3D Particle-Bed Printing Using Different Cementitious Binders and Recycled Sand
  11. Tinoco Matheus, Cavalcante Tiago, Andrade Luiza, Araújo Olga et al. (2025-01)
    Mix-Design-Strategies for 3D Printable Bio-Based Cementitious Composites Using Rice-Husk-Particles as Multifunctional Aggregates
  12. Santos da Mata Gomes Daniela, Rocutan Melina, Pereira Lucas, Motezuki Fabio et al. (2024-12)
    Simulation of 3D Concrete Printing Using an Implicit Formulation of the Moving Particle Semi-Implicit Method
  13. Heinze Lisa, Liebringshausen Anne, Eversmann Philipp (2024-11)
    3D Printing with Wood Waste:
    Development of Reusable Printing Material Based on Waste Wood Particles and Its Digital Manufacturing Process for Wall Constructions in Architecture
  14. Straßer Alexander, Haynack Alexander, Kränkel Thomas, Gehlen Christoph (2024-09)
    Additive Manufacturing by the Selective Paste-Intrusion:
    Effect of the Distance of the Print Nozzle to the Particle-Bed on the Print Quality
  15. Vasilić Ksenija, Udayakumar Raja, Böhler David, Mai (née Dressler) Inka et al. (2024-09)
    A Numerical Model for Simulating Particle-Bed 3D Printing
  16. Brunner Kim, Tandon Kai, Stengel Thorsten (2024-09)
    Hydration Characteristics of 3D Particle-Bed Printed Cementitious Specimens
  17. Ravindran Vishwanath, Ranganathan Thiyagarajan, Rahul Attupurathu (2024-08)
    Migration of Particles Suspended in Yield-Stress Fluids:
    Insights from Numerical Simulation of Pipe Flow of 3D Printable Concrete
  18. Zhang Yiyuan, Lesage Karel, Zhang Yi, Tao Yaxin et al. (2024-07)
    Effect of Magnetic Intervention-Time on the Buildability of Printable Cement and Limestone-Pastes Containing Fe3O4-Particles
  19. Liu Junli, Haikola Pirjo, Fox Kate, Tran Jonathan (2024-06)
    3D Printing of Cementitious Composites with Seashell-Particles:
    Mechanical and Microstructural Analysis
  20. Maierdan Yierfan, Zhao Diandian, Choksi Pooja, Garmonina Maria et al. (2024-05)
    Rheology, 3D Printing, and Particle-Interactions of Xanthan-Gum-Clay Binder for Earth Concrete
  21. Cheng Hanbin, Radlińska Aleksandra, Hilman Michael, Liu Feihong et al. (2024-05)
    Modeling Concrete-Deposition via 3D Printing Using Reproducing Kernel-Particle-Method
  22. Wang Xingjian, Naito Clay, Fox John, Bocchini Paolo (2024-02)
    Impact of Mix Proportions on Particle-Bed 3D Printed Concrete Properties
  23. Jia Lutao, Jia Zijian, Zhang Zedi, Tang Zhenzhong et al. (2024-02)
    Effect of Recycled Brick-Powder with Various Particle-Features on Early-Age Hydration, Water-State, and Rheological Properties of Blended Cement-Paste in the Context of 3D Printing
  24. Yu Hao, Zhang Weiwei, Yin Binbin, Sun Weikang et al. (2024-01)
    Modeling Extrusion-Process and Layer-Deformation in 3D Concrete Printing via Smoothed Particle-Hydrodynamics
  25. Li Zihan, Liu Huanbao, Nie Ping, Cheng Xiang et al. (2023-12)
    Mechanical Properties of Concrete Reinforced with High-Performance Micro-Particles for 3D Concrete Printing
  26. Bono Victor, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2023-12)
    Methodology for Formulating Low-Carbon Printable Mortar Through Particles-Packing-Optimization
  27. Carvalho Ivo, Melo Abcael, Melo Carlos, Brito Mateus et al. (2023-12)
    Evaluation of the Effect of Rubber-Waste-Particles on the Rheological and Mechanical Properties of Cementitious Materials for 3D Printing
  28. Zhu Binrong, Wang Yufei, Sun Junbo, Wei Yang et al. (2023-10)
    An Experimental Study on the Influence of Waste-Rubber-Particles on the Compressive, Flexural and Impact Properties of 3D Printable Sustainable Cementitious Composites
  29. Xie Xiangyu, Liu Xuemei, Ding Faxing, Zhang Lihai (2023-08)
    Characteristics and Mechanism of the Particle-Migration Subject to the Shear Flow of Concrete Flow Under Pressure
  30. Rizzieri Giacomo, Ferrara Liberato, Cremonesi Massimiliano (2023-07)
    Numerical Simulation of the Extrusion and Layer-Deposition-Processes in 3D Concrete Printing with the Particle-Finite-Element-Method
  31. Talke Daniel, Saile Bettina, Meier Niklas, Herding Friedrich et al. (2023-03)
    Particle-Bed 3D Printing by Selective Cement-Activation:
    Influence of Process Parameters on Particle-Bed Density
  32. Xu Zhuoyue, Zhang Dawang, Li Hui, Sun Xuemei (2023-02)
    Effects of the Distribution of Solid Particles on the Rheological Properties and Buildability of 3DPM Fresh Pastes with Different FA/GGBFS Content
  33. Tinoco Matheus, Gouvêa Lucas, Cássia Magalhães Martins Karenn, Toledo Filho Romildo et al. (2022-12)
    The Use of Rice Husk Particles to Adjust the Rheological Properties of 3D Printable Cementitious Composites Through Water Sorption
  34. Zhang Chao, Jia Zijian, Luo Zhe, Deng Zhicong et al. (2022-11)
    Printability and Pore-Structure of 3D Printing Low-Carbon Concrete Using Recycled Clay-Brick-Powder with Various Particle-Features
  35. Kondepudi Kala, Subramaniam Kolluru, Nematollahi Behzad, Bong Shin et al. (2022-11)
    Study of Particle-Packing and Paste-Rheology in Alkali-Activated Mixtures to Meet the Rheology Demands of 3D Concrete Printing:
    Correction
  36. Qian Hao, Hua Sudong, Yue Hongfei, Feng Guiyang et al. (2022-09)
    Utilization of Recycled Construction-Powder in 3D Concrete Printable Materials through Particle-Packing-Optimization
  37. Riegger Felix, Zäh Michael (2022-08)
    Additive Manufacturing of Steel-Reinforcements:
    Integration of WAAM Reinforcements in Particle-Bed 3D Printing with Selective Cement-Paste-Intrusion
  38. Danché Valentine, Pierre Alexandre, Ndiaye K., Ngo Tien (2022-06)
    Particle-Bed Technique for Hempcrete
  39. Matos Paulo, Zat Tuani, Corazza Kiara, Fensterseifer Emilia et al. (2022-05)
    Effect of TiO2 Nano-Particles on the Fresh Performance of 3D Printed Cementitious Materials
  40. Kondepudi Kala, Subramaniam Kolluru, Nematollahi Behzad, Bong Shin et al. (2022-05)
    Study of Particle-Packing and Paste-Rheology in Alkali-Activated Mixtures to Meet the Rheology Demands of 3D Concrete Printing
  41. Fuente Albert, Blanco Ana, Galeote Eduardo, Cavalaro Sergio (2022-04)
    Structural Fiber-Reinforced Cement-Based Composite Designed for Particle-Bed 3D Printing Systems:
    Case Study Parque De Castilla Footbridge in Madrid
  42. Lowke Dirk, Mai (née Dressler) Inka, Keita Emmanuel, Perrot Arnaud et al. (2022-02)
    Material-Process Interactions in Particle-Bed 3D Printing and the Underlying Physics
  43. Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2022-02)
    Extrusion-Process-Simulation and Layer-Shape-Prediction During 3D Concrete Printing Using the Particle-Finite-Element-Method
  44. Overmeir Anne, Figueiredo Stefan, Šavija Branko, Bos Freek et al. (2022-02)
    Design and Analyses of Printable Strain-Hardening Cementitious Composites with Optimized Particle-Size-Distribution
  45. Xie Xiangyu, Zhang Lihai, Shi Caijun, Liu Xuemei (2022-01)
    Prediction of Lubrication-Layer Properties of Pumped Concrete Based on Flow-Induced Particle-Migration
  46. Mai (née Dressler) Inka, Brohmann Leon, Freund Niklas, Gantner Stefan et al. (2021-10)
    Large Particle 3D Concrete Printing:
    A Green and Viable Solution
  47. Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2021-09)
    Particle-Finite-Element-Simulation of Extrusion-Processes of Fresh Concrete During 3D Concrete Printing
  48. Yang Huashan, Che Yujun, Shi Mengyuan (2021-07)
    Influences of Calcium-Carbonate-Nano-Particles on the Workability and Strength of 3D Printing Cementitious Materials Containing Limestone-Powder
  49. Fataei Shirin, Secrieru Egor, Mechtcherine Viktor, Roussel Nicolas (2021-07)
    A First-Order Physical Model for the Prediction of Shear-Induced Particle-Migration and Lubricating-Layer Formation During Concrete Pumping
  50. Sambucci Matteo, Valente Marco (2021-06)
    Influence of Waste-Tire-Rubber-Particles-Size on the Microstructural, Mechanical, and Acoustic Insulation Properties of 3D Printable Cement Mortars
  51. Long Wujian, Lin Can, Tao Jie-Lin, Ye Taohua et al. (2021-02)
    Printability and Particle-Packing of 3D Printable Limestone-Calcined-Clay-Cement Composites
  52. Weger Daniel, Gehlen Christoph (2021-01)
    Particle-Bed Binding by Selective Paste-Intrusion:
    Strength and Durability of Printed Fine-Grain Concrete Members
  53. Weger Daniel, Pierre Alexandre, Perrot Arnaud, Kränkel Thomas et al. (2021-01)
    Penetration of Cement-Pastes into Particle-Beds:
    A Comparison of Penetration Models
  54. Weger Daniel, Baier Daniel, Straßer Alexander, Prottung Sophia et al. (2020-07)
    Reinforced Particle-Bed Printing by Combination of the Selective Paste-Intrusion Method with Wire and Arc Additive Manufacturing:
    A First Feasibility Study
  55. Yu Shiwei, Sanjayan Jay, Du Hongjian (2020-07)
    Impact of Particle-Size and Grading on Aggregate-Bed 3D Concrete Printing
  56. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2020-07)
    Shape Accuracy Evaluation of Geopolymer Specimens Made Using Particle-Bed 3D Printing
  57. Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2020-07)
    2D Numerical Modelling of Particle-Bed 3D Printing by Selective Paste-Intrusion
  58. Lowke Dirk, Talke Daniel, Mai (née Dressler) Inka, Weger Daniel et al. (2020-05)
    Particle-Bed 3D Printing by Selective Cement-Activation:
    Applications, Material and Process Technology
  59. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2019-09)
    Effect of Silicon-Carbide-Nano-Particles on 3D Printability of Cement-Based Materials
  60. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-07)
    An Ab-Inito Approach for Thixotropy Characterisation of Nano-Particle-Infused 3D Printable Concrete
  61. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-07)
    Post-processing Methods to Improve Strength of Particle-Bed 3D Printed Geopolymer for Digital Construction Applications
  62. Mendoza Reales Oscar, Duda Pedro, Silva Emílio, Paiva Maria et al. (2019-06)
    Nanosilica-Particles as Structural Buildup Agents for 3D Printing with Portland Cement-Pastes
  63. Pierre Alexandre, Perrot Arnaud (2019-04)
    3D Printing by Selective Binding in a Particle-Bed:
    Principles and Challenges
  64. Reinold Janis, Meschke Günther (2018-10)
    Particle-Finite-Element-Simulation of Fresh Concrete for 3D Printing Applications
  65. Lowke Dirk, Dini Enrico, Perrot Arnaud, Weger Daniel et al. (2018-07)
    Particle-Bed 3D Printing in Concrete Construction:
    Possibilities and Challenges