Skip to content

#geometry

Keywords by Co - Occurrence

  1. Feliciano Renzo, Barrera Natalia, Lukyanenko Artyom, Rangel Bárbara et al. (2025-12)
    Sustainable Geometries:
    A Comparative Analysis of Thermal Performance in Uninsulated 3D Printed Concrete Wall Topologies
  2. Hammoud Ahmad, Mohomad Yosef, Shomar Hasan, Masad Eyad et al. (2025-12)
    Data-Driven Framework for Printability and Geometric Quality Prediction in 3D Concrete Printing
  3. Kalmykov Oleg, Reznik Petro, Furman Inna, Demianenko Ivan (2025-11)
    Experimental Testing of a Complex-Geometry Floor Slab Manufactured Using 3DCP Technology
  4. Álvarez Luisa, Fernandez Brian, Saldarriaga Federico, Romero Héctor et al. (2025-11)
    Development and Bioclimatic Evaluation of Parametrically Designed Geometries for 3D-Printed Concrete Walls
  5. Banijamali Kasra, Martin Michael, Mascarenas David, Kazemian Ali (2025-11)
    Automated Inspection in Robotic 3D Printing:
    In-Process Geometrical Measurements Using Structured Light Machine Vision
  6. Dörrie Robin, Lachmayer Lukas, Baghdadi Abtin, David Martin et al. (2025-11)
    Investigation on Process Guidelines and Geometric Capabilities for Robust Shotcrete 3D Printing
  7. Li Zhengrong, Xing Wenjing, Sun Jingting (2025-09)
    Heat Transfer Calculation and Correction for 3D Printed Walls Incorporating Surface Geometry Effects
  8. Jeyifous Olubunmi, Schönsee Eric, Strangfeld Christoph, Hüsken Götz (2025-09)
    Investigating the Impact of Material Rheology on Geometric Accuracy in 3D Concrete Printing Using Real-Time Monitoring
  9. Mawas Karam, Maboudi Mehdi, Gerke Markus (2025-09)
    A Review on Geometry and Surface Inspection in 3D Concrete Printing
  10. Liu Ruiqing, Du Hongjian (2025-09)
    Optimizing Thermal Insulation Through Geometric Design:
    Comparative Analysis of Normal and Lightweight 3D Printed Concrete Wall Patterns
  11. Yarlagadda Tejeswar, Zhang Zixin, Jiang Liming, Usmani Asif (2025-08)
    A Conceptual Model for Building Artistic and Geometrically Complex Building Envelopes Using Concrete 3D Printing
  12. Kumar Rohan, Das Nabodyuti, Nanthagopalan Prakash (2025-08)
    Novel Interlocking Nozzle Geometry for Enhanced Interlayer Strengthening in 3D Concrete Printing
  13. İlerisoy Zeynep, Takva Çağatay, Top Semahat, Gökgöz Berru et al. (2025-08)
    The Effectiveness of 3D Concrete Printing Technology in Architectural Design:
    Different Corner-Wall Combinations in 3D Printed Elements and Geometric Form Configurations in Residential Buildings
  14. Maboudi Mehdi, Mawas Karam, Gerke Markus (2025-07)
    Geometric Inspection in 3D Concrete Manufacturing:
    Comparison of Data Capturing Techniques
  15. Mesoudy Mouad, Rida Foulki, Driss Amegouz (2025-07)
    Addressing Geometrical and Dimensional Accuracy Challenges in 3D Concrete Printing
  16. Alnemrawi Bara'a, Rousan Rajai, Abdalla Khairedin, Lagaros Nikos (2025-06)
    Evaluating the Structural Performance of 3D Printed FRCC Beams with Anchoring Reinforcement:
    Material, Geometry, and Loading Perspectives
  17. Kontovourkis Odysseas, Georgiou Christos, Andreou Alexis, Andreou Vasilis et al. (2025-06)
    Measuring and Evaluating Layer Height to Width Ratio in 3DCP Towards Higher Geometric Conformity
  18. Cisowski Adam, Kowalik Michał (2025-06)
    The Influence of the Cross-Sectional Geometry on Stress Concentration in 3D Printed Concrete Elements:
    A Preliminary Study
  19. Cui Weijiu, Liu Wenliang, Guo Ruyi, Da Wan et al. (2025-02)
    Geometrical Quality Inspection in 3D Concrete Printing Using AI-Assisted Computer Vision
  20. Versteege Jelle, Wolfs Robert, Salet Theo (2025-02)
    Data-Driven Additive Manufacturing with Concrete - Enhancing In-Line Sensory Data with Domain Knowledge:
    Part I: Geometry
  21. Vlieger Jentel, Blaakmeer Jan, Gruyaert Elke, Cizer Özlem (2025-01)
    Assessing Static and Dynamic Yield-Stress of 3D Printing Mortar with Recycled Sand:
    Influence of Sand-Geometry, Fineness Modulus, and Water-to-Binder Ratio
  22. Lori Ali, Mehrali Mehdi (2025-01)
    Filament-Geometry-Control of Printable Geopolymer Using Experimental and Data-Driven Approaches
  23. Yabanigül Meryem, Özer Derya (2024-12)
    Exploring Architectural Units Through Robotic 3D Concrete Printing of Space-Filling Geometries
  24. Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-12)
    Influence of the Nozzle Geometry on Mechanical Properties of 3D Printed Concrete:
    Experiment and Finite Element Study
  25. Forcael Eric, Alucema Contreras Elena, Burkart Medina Adolfo, García-Alvarado Rodrigo et al. (2024-12)
    Comparative Study of Visual Programming Procedures for 3D Concrete Printing of Different Geometric Shapes
  26. Li Zhengrong, Xing Wenjing, Wang Heyu, Sun Jingting (2024-10)
    The Effect of Heterogeneous Geometry on Steady-State Heat Transfer in Extrusion-Based 3D Printed Structures
  27. Martin Michael, Banijamali Kasra, Gilbert Hunter, Mascarenas David et al. (2024-09)
    LiDAR-Based Real-Time Geometrical Inspection for Large-Scale Additive Manufacturing
  28. Hojati Maryam, Sedghi Reza, Li Zhanzhao, Memari Ali et al. (2024-09)
    Flexural Strength of 3D Printed Concrete Beams:
    Exploring Barbed-Wire Reinforcement and Cross-Sectional Geometry
  29. Lachmayer Lukas, Quantz Jelle, Heeren Hauke, Recker Tobias et al. (2024-09)
    A Spatial Multi-Layer Control-Concept for Strand-Geometry-Control in Robot-Based Additive Manufacturing-Processes
  30. Daneshvar Dana, Rabiei Mahsa, Gupta Shashank, Najmeddine Aimane et al. (2024-09)
    Geometric Fidelity of Interlocking Bodies in Two-Component Robotic Additive Manufacturing
  31. Gomzyakov Albert, Taubert Markus, Sokolov Dmitrii, Reuter Uwe et al. (2024-09)
    Setup for ML-Based Prediction of Concrete Rheology from 3D Slump-Test-Geometry
  32. Jeyifous Olubunmi, Schönsee Eric, Strangfeld Christoph, Hüsken Götz (2024-09)
    Correlation of Continuously Measured In-Line Process Parameters and Extruded Geometry in 3D Concrete Printing Experiments
  33. Anjos Marcos, Maia José, Souza Dias Leonardo, Medeiros Fernanda et al. (2024-09)
    Effect of the Geometry of Representative Volumetric Masonry Elements:
    Experimental and Numerical Analysis
  34. Hack Norman, Kloft Harald, Mai (née Dressler) Inka, D'Acunto Pierluigi et al. (2024-09)
    Injection 3D Concrete Printing:
    From Structural Geometry to Fabrication
  35. Sovetova Meruyert, Kaiser Calautit John (2024-08)
    Thermal and Energy Efficiency in 3D Printed Buildings:
    Review of Geometric Design, Materials and Printing Processes
  36. Farrokhsiar Paniz, Gürsoy Benay, Duarte José (2024-08)
    A Comprehensive Review on Integrating Vision-Based Sensing in Extrusion-Based 3D Printing Processes:
    Toward Geometric Monitoring of Extrusion-Based 3D Concrete Printing
  37. Mütevelli Özkan İffet, Aldemir Alper (2024-07)
    Machine-Learning Networks to Predict the Ultimate Axial Load and Displacement Capacity of 3D Printed Concrete Walls with Different Section Geometries
  38. Cui Weijiu, Sun Haijun, Zhou Jiangang, Wang Sheng et al. (2024-07)
    Geometric Quality Evaluation of Three-Dimensional Printable Concrete Using Computational Fluid Dynamics
  39. Zhu Jinggao, Cervera Miguel, Ren Xiaodan (2024-06)
    Buildability of Complex 3D Printed Concrete Geometries Using Peridynamics
  40. Spencer Lawson, Genedy Moneeb, Strait James, Nair Sriramya et al. (2024-06)
    Concrete Gyroid:
    An Additive Manufacturing (AM) Method to 3D Print Gyroid Geometries with a Cementitious Material
  41. Zhi Peng, Wu Yuching, Bai Meiyan (2024-06)
    Determining the Effect of Geometric and Dynamic Properties of Screws on Fiber-Orientation During FRC 3D Printing Based on Discrete Element Simulation
  42. Jhun Jihye, Lee Dong-Hyun, Rehman Atta, Kang Seungwoo et al. (2024-05)
    Development of a Real-Time Geometric Quality Monitoring System for Extruded Filaments of 3D Concrete Printing Construction
  43. Salaimanimagudam M., Jayaprakash Jaganathan (2024-04)
    Effect of Introducing Dummy Layers on Inter-Layer Bonding and Geometrical Deformations in Concrete 3D Printing
  44. Tripathi Avinaya, Nair Sooraj, Chauhan Harshitsinh, Neithalath Narayanan (2024-04)
    Print Geometry Alterations and Layer-Staggering to Enhance Mechanical Properties of Plain and Fiber-Reinforced Three-Dimensional-Printed Concrete
  45. Li Zhengrong, Xing Wenjing, Sun Jingting, Feng Xiwen et al. (2024-03)
    Thermal Network Model for Anisotropic Heat Transfer in 3D Printed Complex Geometry Structures
  46. Yang Yan, Wu Hangzi, Han Lifang, Huang Qingling et al. (2023-12)
    Investigation on Geometric and Surface Finish Quality of 3D Concrete Printed Walls with Hollow Section
  47. Freund Niklas, David Martin, Böhler David, Mai (née Dressler) Inka et al. (2023-12)
    Shotcrete 3D Printing:
    Interaction of Nozzle Geometry, Homogeneity and Hardened Concrete Properties
  48. Wu Yuching, Chen Huaikun, Zhi Peng, Zhu Peng et al. (2023-12)
    Effect of 3D Printing Geometrical Monocline on Behaviors of Curved Timoshenko Beams Based on Isogeometric Analyses
  49. Miranda Luiza, Jovanović Balša, Lesage Karel, Schutter Geert (2023-10)
    Geometric Conformability of 3D Concrete Printing Mixtures from a Rheological Perspective
  50. Freund Niklas, Dörrie Robin, David Martin, Kloft Harald et al. (2023-10)
    Enclosing Reinforcement Structures in Shotcrete 3D Printing:
    The Effect of Reinforcement Geometry and Accelerator Dosage on the Formation of Voids
  51. Slepicka Martin, Mawas Karam, Borrmann André, Maboudi Mehdi et al. (2023-09)
    Digital Twinning in Additive Manufacturing:
    Closing the Digital-Physical-Digital Loop by Automated Integration of Captured Geometric Data into Fabrication Information Models
  52. Salaimanimagudam M., Jayaprakash Jaganathan (2023-06)
    Effect of Printing Parameters on Inter-Filament Voids, Bonding, and Geometrical Deviation in Concrete 3D Printed Structures
  53. Hanifa Mohamad, Figueiredo Bruno, Mendonça Paulo (2023-04)
    Additive Manufacturing Earth-Based Composite:
    Strategical and Computational Methodology for Building-Shell-Geometries
  54. Mesnil Romain, Poussard Valentin, Sab Karam, Caron Jean-François (2022-11)
    On the Geometrical Origin of the Anisotropy in Extrusion-Based 3D Printed Structures
  55. Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping et al. (2022-11)
    Flow and Deformation Behaviors of Cementitious Materials Through Nozzles with Different Geometric Parameters:
    Experimental and Numerical Approaches
  56. Frangez Valens, Taha Nizar, Feihl Nicolas, Lloret-Fritschi Ena et al. (2022-10)
    Geometric Feedback System for Robotic Spraying
  57. Chang Ze, Liang Minfei, Xu Yading, Schlangen Erik et al. (2022-08)
    3D Concrete Printing:
    Lattice Modeling of Structural Failure considering Damage and Deformed Geometry
  58. Chang Ze, Zhang Hongzhi, Liang Minfei, Schlangen Erik et al. (2022-07)
    Numerical Simulation of Elastic Buckling in 3D Concrete Printing Using the Lattice-Model with Geometric Non-Linearity
  59. Xu Jie, Kolawole John, Provis John, Dobrzanski James et al. (2022-06)
    An Early Trial on Milling 3D Printed Concrete Geometries:
    Observations and Insights of the Process
  60. Mawas Karam, Maboudi Mehdi, Gerke Markus (2022-05)
    Automatic Geometric Inspection in Digital Fabrication
  61. Buswell Richard, Xu Jie, Becker Daniel, Dobrzanski James et al. (2022-04)
    Geometric Quality Assurance for 3D Concrete Printing and Hybrid Construction Manufacturing Using a Standardised Test Part for Benchmarking Capability
  62. Zhi Peng, Wu Yuching, Yang Qianfan, Kong Xiangrui et al. (2022-03)
    Effect of Spiral Blade Geometry on 3D Printed Concrete Rheological Properties and Extrudability Using Discrete Event Modeling
  63. Sangiorgio Valentino, Parisi Fabio, Fieni Francesco, Parisi Nicola (2022-01)
    The New Boundaries of 3D-Printed Clay-Bricks-Design:
    Printability of Complex Internal Geometries
  64. Nair Sooraj, Sant Gaurav, Neithalath Narayanan (2021-11)
    Mathematical Morphology-Based Point-Cloud-Analysis-Techniques for Geometry-Assessment of 3D Printed Concrete Elements
  65. Wolfs Robert, Salet Theo, Roussel Nicolas (2021-10)
    Filament-Geometry-Control in Extrusion-Based Additive Manufacturing of Concrete:
    The Good, the Bad and the Ugly
  66. Burger Joris, Wangler Timothy, Chiu Yu-Hung, Techathuvanun Chanon et al. (2021-09)
    Material-Informed Formwork Geometry:
    The Effects of Cross-Sectional Variation and Patterns on the Strength of 3D Printed Eggshell Formworks
  67. Nedjar Boumediene (2021-07)
    On a Geometrically Non-Linear Incremental Formulation for the Modeling of 3D Concrete Printing
  68. Wu Yuching, Yang Qianfan, Kong Xiangrui, Zhi Peng et al. (2021-05)
    Uncertainty Quantification for the Representative Volume Element of Geometrically Mono-Clinic 3D Printed Concrete
  69. Ooms Ticho, Vantyghem Gieljan, Coile Ruben, Corte Wouter (2020-12)
    A Parametric Modelling-Strategy for the Numerical Simulation of 3D Concrete Printing with Complex Geometries
  70. Lao Wenxin, Li Mingyang, Tjahjowidodo Tegoeh (2020-09)
    Variable-Geometry Nozzle for Surface Quality Enhancement in 3D Concrete Printing
  71. Henke Klaudius, Talke Daniel, Matthäus Carla (2020-07)
    Additive Manufacturing by Extrusion of Lightweight Concrete:
    Strand Geometry, Nozzle Design and Layer Layout
  72. Pekuss Raitis, Soto Borja (2020-07)
    Preliminary Productivity-Analysis of Conventional, Pre-Cast and 3D Printing Production-Techniques for Concrete Columns with Simple Geometry
  73. Ahmed Zeeshan, Biffi Alessia, Hass Lauri, Bos Freek et al. (2020-07)
    3D Concrete Printing:
    Free-Form Geometries with Improved Ductility and Strength
  74. Comminal Raphaël, Silva Wilson, Andersen Thomas, Stang Henrik et al. (2020-07)
    Influence of Processing Parameters on the Layer Geometry in 3D Concrete Printing:
    Experiments and Modelling
  75. Manikandan Karthick, Jiang Xuepeng, Singh Amit, Li Beiwen et al. (2020-06)
    Effects of Nozzle Geometries on 3D Printing of Clay Constructs:
    Quantifying Contour-Deviation and Mechanical Properties
  76. Xu Jie, Buswell Richard, Kinnell Peter, Biro Istvan et al. (2020-06)
    Inspecting Manufacturing Precision of 3D Printed Concrete Parts Based on Geometric Dimensioning and Tolerancing
  77. Nair Sooraj, Panda Subhashree, Santhanam Manu, Sant Gaurav et al. (2020-05)
    A Critical Examination of the Influence of Material-Characteristics and Extruder-Geometry on 3D Printing of Cementitious Binders
  78. Lakhal Othman, Chettibi Taha, Belarouci Abdelkader, Dherbomez Gerald et al. (2020-02)
    Robotized Additive Manufacturing of Funicular Architectural Geometries Based on Building Materials
  79. Lao Wenxin, Li Mingyang, Wong Teck, Tan Ming et al. (2020-02)
    Improving Surface-Finish-Quality in Extrusion-Based 3D Concrete Printing Using Machine-Learning-Based Extrudate-Geometry-Control
  80. Bard Joshua, Cupkova Dana, Washburn Newell, Zeglin Garth (2018-12)
    Robotic Concrete Surface Finishing:
    A Moldless Approach to Creating Thermally Tuned Surface Geometry for Architectural Building Components Using Profile 3D Printing
  81. Bard Joshua, Cupkova Dana, Washburn Newell, Zeglin Garth (2018-09)
    Thermally Informed Robotic Topologies:
    Profile 3D Printing for the Robotic Construction of Concrete Panels, Thermally Tuned Through High-Resolution Surface Geometry
  82. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2018-09)
    Adapting Smart Dynamic Casting to Thin-Folded Geometries
  83. Ketel Sabrina, Falzone Gabriel, Wang Bu, Washburn Newell et al. (2018-04)
    A Printability Index for Linking Slurry Rheology to the Geometrical Attributes of 3D Printed Components
  84. Sarakinioti Maria, Turrin Michela, Konstantinou Thaleia, Tenpierik Martin et al. (2018-03)
    Developing an Integrated 3D Printed Façade with Complex Geometries for Active Temperature-Control
  85. Teizer Jochen, Blickle Alexander, King Tobias, Leitzbach Olaf et al. (2016-07)
    Large-Scale 3D Printing of Complex Geometric Shapes in Construction
  86. Yeh Zhenghao, Khoshnevis Behrokh (2009-09)
    Geometric Conformity-Analysis for Automated Fabrication Processes Generating Ruled Surfaces:
    Demonstration for Contour Crafting