Skip to content

#carbon

Keywords by Co - Occurrence

  1. Janghorban Emad, Joshi Arpan, Gaspar Florindo (2026-04)
    Evaluating the Effect of Glass and Carbon Fiber Mesh on 3D-Printed Concrete Performance
  2. Chougule Pranav, Abraham David, Farnam Yaghoob, Ebrahimkhanlou Arvin (2026-04)
    Laser-Based Monitoring of Robotic Carbon Dioxide Injection in Fresh Additively Manufactured Concrete
  3. Bradford Katy, Gentry Russell, Kurtis Kimberly (2026-04)
    Embodied Carbon and Energy of Offsite 3D-Printed Concrete Walls
  4. Jiang Youbau, Li Shuaifeng, Xia Jiahui, Yang Fan et al. (2026-03)
    Experimental Studies on Impact Resistance of 3D Printed Concrete Spherical Structure with Carbon Fiber Reinforced PLA Honeycomb Energy Absorber
  5. Lu Pengyuan, Yang Yekai, Zhao Qingxin, Liu Zhongxian et al. (2026-03)
    Low-Carbon 3D-Printed Geopolymer Ultra-High-Strength Concrete Enabled by Soda Residue:
    Sustainable Development and Environmental Impact Assessment
  6. Punurai Wonsiri, Liu Yiliu (2026-03)
    Integrating Machine Learning with 3D Printing Concrete for Marine Structures:
    Mix Design, Strength Assessment, and Carbon Footprint Prediction
  7. Sitong Wang, Wu Chengde (2026-03)
    Biochar-Infused 3D Concrete Printing for Carbon Sequestration
  8. Cheng Hanbin, Duarte José, Memari Ali, Bilén Sven et al. (2026-02)
    Recycled Cork Aggregate for 3D Concrete Printing:
    Rheology, Pore-Driven Anisotropy Mitigation, and Low-Carbon Thermal Buffering
  9. Ding Shengxuan, Li Jiren, Wang Mingqiang (2026-02)
    Mechanical Performance and Life-Cycle Carbon Reduction Benefits of 3D-Printed Permanent-Formwork Columns Filled with Low-Magnesia Concrete
  10. Lolli Francesca, Mehlomakulu Bungane, Azari Jafari Hessam, Kirchain Randolph et al. (2026-02)
    On the Sustainability of Digital Construction:
    Whole Building Life Cycle Carbon Emissions According to Three Construction Techniques
  11. Neef Tobias, Butler Marko, Mechtcherine Viktor (2026-02)
    Methodology for Integrating Mineral-Impregnated Carbon Fibers as Reinforcement in Fine Filament 3D Concrete Printing
  12. Alessandro Antonella, Sousa Israel, Laflamme Simon, Ubertini Filippo (2026-02)
    Effect of Carbon Fillers and Printing Path Strategy on Damage Detection in 3D-Printed Smart Concretes for Structural Health Monitoring
  13. Vetrivelan R., Gettu Ravindra, Palaniappan Sivakumar, Kumar Yogesh (2026-02)
    Embodied Carbon, Time and Cost of Two Post-Office Buildings:
    Comparison of 3D Printed Concrete and Conventional Buildings
  14. Ahmed Nishad, Sarkar Sudipto, Ashraf Warda (2026-02)
    Rheological and Mechanical Properties of Carbon-Negative 3D Printed Mortar Using Functionalized Biochar
  15. Garshasbi Sajad, Mousavi Seyed, Nazarpour Hadi, Dehestani Mehdi (2026-02)
    Low Carbon Dioxide 3D Printable Concrete:
    Balancing Rheology, Strength and Environmental Impact Using Bentonite and Ground Granulated Blast-Furnace Slag
  16. Neef Tobias, Wen Yue, Friese Danny, Cherif Chokri et al. (2026-02)
    Digital Fabrication Methods for Carbon Reinforced Shell-Like Concrete Structures
  17. Li Long, Lu Shuaijie, Singh Amardeep, Hao Lucen et al. (2026-02)
    Improving Buildability and Reducing Carbon Emission of 3D Printed Concrete via CO2 Mixing and Waste Glass Powder:
    A Synergistic Approach
  18. Bong Shin, Zhao Yasong, Gao Yangyunzhi, Du Hongjian (2026-01)
    High-Volume Glass Powder Cementitious Material for Low-Carbon Concrete Additive Manufacturing
  19. Liu Liangchao, Liu Huawei, Ma Ruiyang, Wang Zihao et al. (2026-01)
    A Review of Carbon Capture, Utilization and Storage Technologies in Concrete Additive Manufacturing
  20. Kligys Modestas, Girskas Giedrius, Baltuškiene Daiva (2026-01)
    Influence of the Amount of Mineral Additive on the Rheological Properties and the Carbon Footprint of 3D-Printed Concrete Mixtures
  21. Jhun Jihye, Lee Junghyun, Paul Suvash, Lim Sean et al. (2026-01)
    Potential of Rice Husk Biochar in 3D Concrete Printing:
    An Analysis of Fresh-State Rheology, Strength Retention, and Carbon Sequestration
  22. Nguyen Vuong, Jie Cheah, Lao Junying, Huanyu Zhao et al. (2026-01)
    Performance of Lightweight, Reinforced, and Assemblable 3D-Printed Concrete Columns with Low-Carbon Engineered Cementitious Composites
  23. Mu Xiaoshao, Zhang Xiaoling, He Gang, Liew Kim (2026-01)
    Toward Low-Carbon 3D Concrete Printing Through Circular Construction and Waste Valorization
  24. Singh Amardeep, Sun Jingting, Qi Deng, Abden Md et al. (2026-01)
    Evaluating Glass Powder Substitution for 3D Printed Concrete:
    Effects on Thermal Properties and Embodied Carbon
  25. Zhang Chao, Zhang Junyi, Su Yilin, Zhang Yuying et al. (2026-01)
    Low-Carbon 3D-Printed Concrete by Using Biochar as a Carbon Sequestrator
  26. Talukdar A., Belek Fialho Teixeira Müge, Fawzia Sabrina, Zahra Tatheer et al. (2026-01)
    Investigation on the Fresh and Mechanical Properties of Low Carbon 3D Printed Concrete Incorporating Sugarcane Bagasse Ash and Microfibers
  27. Dao Trang, Chau Vinh, Tran Jonathan, Tran Mien (2026-01)
    Balancing Workability, Buildability, and Carbon Sequestration in 3D Printed Concrete via Direct CO2 Mineralization
  28. Wang Hanmo, Wan Yujia, Owyong Shawn, Connie Lim En et al. (2026-01)
    Towards Low-Carbon Construction:
    Nature-Inspired Internal Patterns for Thermal Insulation in Lightweight Concrete Component Cast Using 3D-Printed Formwork
  29. Zhu Binrong, Qi Miao, Chen Wei, Pan Jinlong (2025-12)
    Anisotropic Mechanical Properties of 3D Printed Low-Carbon Concrete and Connection Strategies for Large-Scale Reusable Formwork in Digital Construction
  30. Paul Suvash, Lee Junghyun, Tay Yi, Amr Issam et al. (2025-12)
    Developing Sustainable 3D Printable Concrete Materials Using Olivine Sand for Carbon Sequestration
  31. Eisazadeh Hamid, Chatroudi Narges, Alizadeh Roozbeh (2025-12)
    AI-Based Prediction and Numerical Analysis of Mechanical and Microstructural Parameters of Carbon Fiber Reinforced 3D Printed Composites
  32. Xiao Wei (2025-12)
    Research on the Mechanical and Durability Properties of Carbon Fiber Reinforced 3D Printed Concrete
  33. Sando Mona, Alves Santos Sara, Worms Paul, Gurlo Aleksander et al. (2025-12)
    Evaluation of Continuous Epoxy-Impregnated Carbon Fiber Reinforcement in a 3D-Printable Geopolymer Composite
  34. Liu Xuelin, Kong Jiafeng, Chen Yidong, Wang Liang et al. (2025-12)
    Rheology and Printability Control of Low-Carbon 3D-Printed Cementitious Materials via Circular Use of Recycled Concrete Powder
  35. Wang Zherui, Teitelbaum E., Akbarzadeh Masoud, Aviv D. (2025-11)
    Experimental Assessment on Thermal Mass Performance of Structurally Optimized, 3D-Printed Concrete Floor Element for Carbon Emission Reduction
  36. Davar Saeed, Ma Zhanguo (2025-11)
    Improving the Mechanical Performance of 3D-Printed UHPFRC with Thermally Modified Carbon Fibers
  37. Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-11)
    Multi-Scale Analysis of 3D Printable High-Strength Engineered Cementitious Composite with Carbon and Polyethylene Fibers:
    Rheology, Printability and Hydration Kinetics in Structural Components
  38. Zeng Jun-Jie, Jiang Yuan, Yan Zitong, Sun Hou-Qi et al. (2025-11)
    3D Printing of Continuous Carbon Fiber-Reinforced Polymer Reinforcement for Concrete Columns
  39. Bradshaw James, Balasubramanian Swathi, Si Wen, Khan Mehran et al. (2025-10)
    Towards Greener 3D Printing:
    A Performance Evaluation of Silica Fume-Modified Low-Carbon Concrete
  40. Ding Yong, Kindler Robert, Cen Tianyu, Chen Xiulin et al. (2025-10)
    Valorization of Demolition Waste and Biomass Byproduct into Sustainable Building Materials via Carbon Mineralization and 3D Printing
  41. Ye Htun Thet, Panuwatwanich Kriengsak, Tanapornraweekit Ganchai, Jongvisuttisun Passarin et al. (2025-10)
    Carbon Emission Assessment of 3D Printed Hybrid Modular Concrete Building:
    Work Breakdown Structure
  42. Zhou Juanlan, Shi Xiangwen, Zheng Hongrun, Jin Ruoyu et al. (2025-09)
    Investigating the Effects of Hybrid PVA/BF Fibers in Low-Carbon 3D Printed Concrete with Recycled Aggregates:
    Rheology, Strength, and Anisotropy
  43. Bradford Katy, Gentry Russell, Alon Lola, Kurtis Kimberly (2025-08)
    Construction 3D Printing Material Selection:
    Minimizing Cost and Carbon Footprint of Residential Wall Assemblies
  44. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa (2025-08)
    Transformative Low-Carbon 3D-Printed Infrastructure:
    Machine Learning-Driven Self-Sensing and Self-Heating Limestone Calcined Clay Cement (LC3) Composites
  45. Khan Hilal, Zahid Zamil, Hussain Fazal, Ahmad Junaid et al. (2025-08)
    Sustainable Multifunctional Biochar-Based Cementitious Composites for Carbon Sequestration, Energy Storage, and Smart Infrastructure Applications:
    A Review
  46. Patel Abhishek, Raphael Benny (2025-07)
    Reducing Carbon Emissions in 3D Printed RCC Slabs
  47. Yerikania Utami, Du Hongjian, Poh Leong (2025-07)
    A Comprehensive Experimental Investigation of Anisotropy Behavior on Highly Carbon-Minimized 3D Printed Concrete
  48. Nandurkar Bhupesh, Raut Jayant, Hinge Pawan, Bahoria Boskey et al. (2025-06)
    Multi-Scale Deep Learning Framework for Three Dimensional Printed Self-Sensing Cementitious Composites with Hybrid Nano-Carbon Fillers
  49. Gupta Souradeep, Sahana C., Soda Prabhath, Dwivedi Ashutosh (2025-06)
    Development of Carbon Sequestering 3D-Printable Stabilized Earth Materials:
    Investigation into Engineering Performance and Resistance Against Acid Attack
  50. Rosa Marco, Brito Diogo, Vilas-Boas Rodrigo, Sousa José (2025-06)
    3DCP vs Conventional Construction:
    Comparative Analysis of Energy Performance and Embodied Carbon
  51. Yu Kun-Hao, Teng Teng, Nah So, Chai Hua et al. (2025-05)
    3D Concrete Printing of Triply Periodic Minimum Surfaces for Enhanced Carbon Capture and Storage
  52. Aly Ahmed Aly, Mantawy Islam (2025-05)
    Additive Construction of Low Embodied Carbon Concrete:
    Geopolymer Concrete
  53. Lopes Sousa Israel, Liu Han, Alessandro Antonella, Laflamme Simon et al. (2025-05)
    Piezoresistive Performance of 3D Printed Cementitious Composites Doped with Carbon Microfibers
  54. Noaimat Yazeed, Chougan Mehdi, Seidy Eslam, Albar Abdulrahman et al. (2025-04)
    Optimizing Limestone Calcined Clay Cement for Enhanced 3D Printing Performance of Low-Carbon Materials
  55. Nassrullah Ghaith, Ali Mohd, Rub Rashid, Cho Cung-Suk et al. (2025-03)
    Optimizing Cement-Based Material Formulation for 3D Printing:
    Integrating Carbon Nanotubes and Silica Fume
  56. Liu Han, Laflamme Simon, Cardinali Amelia, Lyu Ping et al. (2025-03)
    Enhancing 3D-Printed Cementitious Composites with Recycled Carbon Fibers from Wind Turbine Blades
  57. Das Arnesh, Wenger Cedric, Walpen Lukas, Flatt Robert (2025-02)
    Early-Age Hydration of Accelerated Low-Carbon Cements for Digital Fabrication
  58. Liu Qiang, Jiang Quan, Zhao Herui, Yu Yang et al. (2025-02)
    Porous Diatomite Promotes Lightweight and Low-Carbon Concrete 3D Printing:
    An Exploratory Study
  59. Posani Magda, Voney Vera, Odaglia Pietro, Du Yi et al. (2025-01)
    Low-Carbon Indoor Humidity Regulation via 3D Printed Superhygroscopic Building Components
  60. Lyu Qifeng, Wang Yalun, Chen Dongjian, Liu Shiyuan et al. (2025-01)
    Energy Storage Properties and Mechanical Strengths of 3D Printed Porous Concrete Structural Supercapacitors Reinforced by Electrodes Made of Carbon-Black-Coated Ni Foam
  61. Lolli Francesca, Mehlomakulu Bungane, Monkman Sean (2025-01)
    Case Study of 3D Printed Concrete as Compared to Conventional Construction:
    Structural Comparison and Life Cycle Carbon Assessment
  62. Pfleger Marc-Patrick, Sam Nina, Radl Elisabeth, Vill Markus (2025-01)
    Assessment of the Suitability of Carbon Long Fibers as Reinforcement for Additively Manufactured Components
  63. Kopitha Kirushnapillai, Rajeev Pathmanathan, Sanjayan Jay, Elakneswaran Yogarajah (2024-12)
    CO2 Sequestration and Low-Carbon-Strategies in 3D Printed Concrete
  64. Neef Tobias, Kalthoff Matthias, Müller Steffen, Cruz Cynthia et al. (2024-12)
    Mineral-Impregnated Carbon-Fibers-Reinforcement for Concrete Elements Manufactured by Extrusion
  65. Cruz Cynthia, Bosbach Sven, Kalthoff Matthias, Beckmann Birgit et al. (2024-12)
    Material-Minimized Rib and Honeycomb Slabs Made of Extruded Carbon-Reinforced Concrete Webs
  66. Silvestro Laura, Ribeiro Rodrigo, Navarrete Iván (2024-12)
    Advancements in Low Carbon-Emission Cements for 3D Printing:
    A State-of-the-Art Review
  67. Liu Han, Laflamme Simon, Cai Bin, Lyu Ping et al. (2024-11)
    Investigation of 3D Printed Self-Sensing UHPC Composites Using Graphite and Hybrid Carbon Microfibers
  68. Şahin Hatice, Akarsu Özenç Aliye, Saka Dinç Zaide, Mardani Ali et al. (2024-11)
    Investigation of Fresh and Hardened Properties of 3D Printable Concrete Containing Ozone-Modified Carbon-Fiber
  69. Jin Willy, Caron Jean-François, Ouellet-Plamondon Claudiane (2024-11)
    Minimizing the Carbon Footprint of 3D Printing Concrete:
    Leveraging Parametric LCA and Neural Networks Through Multi-Objective-Optimization
  70. Curth Alexander, Alvarez Eduardo, Sass Lawrence, Norford Leslie et al. (2024-11)
    Additive Energy:
    3D Printing Thermally Performative Building Elements with Low-Carbon Earthen Materials
  71. Bono Victor, Ducoulombier Nicolas, Loulha Sarena, Mesnil Romain et al. (2024-11)
    Toward 3D Printable Low-Carbon Mortar:
    Method and Application
  72. Sousa Israel, Alessandro Antonella, Mesquita Esequiel, Laflamme Simon et al. (2024-11)
    Comprehensive Review of 3D Printed Cementitious Composites with Carbon Inclusions:
    Current Status and Perspective for Self-Sensing Capabilities
  73. Federowicz Karol, Cendrowski Krzysztof, Sikora Paweł (2024-10)
    Low-Carbon Cementitious Composite Incorporated with Biochar and Recycled Fines Suitable for 3D Printing Applications:
    Hydration, Shrinkage and Early-Age Performance
  74. Tang Hong, Xiong Shiqi (2024-09)
    Comparative Analysis of Carbon-Emission Accounting and Carbon-Reduction-Effect of 3D Printed Concrete Structures at the Stage of Architecturalization
  75. Maury-Ramírez Aníbal, Rinke Mario, Blom Johan (2024-09)
    Low-Carbon Embodied, Self-Cleaning, and Air-Purifying Building Envelope Components Using TiO2 Photocatalysis, 3D Printing, and Recycling
  76. Jin Willy, Roux Charlotte, Ouellet-Plamondon Claudiane, Caron Jean-François (2024-09)
    Life Cycle Assessment of Limestone-Calcined-Clay-Concrete:
    Potential for Low-Carbon 3D Printing
  77. Lim Sean, Tay Yi, Paul Suvash, Lee Junghyun et al. (2024-09)
    Carbon Capture and Sequestration with In-Situ CO2 and Steam Integrated 3D Concrete Printing
  78. Dulaj Albanela, Peeters Sef, Poorsolhjouy Payam, Salet Theo et al. (2024-09)
    Combined Analytical and Numerical Modelling of the Electrical Conductivity of 3D Printed Carbon-Nano-Tube-Cementitious-Nano-Composites
  79. Ivaniuk Egor, Mechtcherine Viktor (2024-09)
    A Method for Measuring the Bond Strength Between Impregnated Carbon-Yarn and 3D Printed Strain-Hardening Cementitious Composites
  80. Padilla-Encinas Pilar, Fernández Raúl, Cuevas Jaime, Marieta Cristina et al. (2024-09)
    Low-Carbon Footprint Magnesium-Phosphate-Cement for 3D Concrete Printing
  81. Corfe Ian (2024-09)
    A Digital Library for Using Mine-Tailings in Low-Carbon Concrete Replacements for Mine Back-Filling & 3D Printing
  82. Colyn Markus, Babafemi Adewumi, Zijl Gideon (2024-09)
    Advancements in Sustainability of 3D Concrete Printing:
    Presenting Low-Carbon Mixtures for Additively Manufactured Concrete Structures in Practice
  83. Noaimat Yazeed, Ghaffar Seyed (2024-09)
    Exploring Low-Carbon Cementitious Materials for 3D Printing Applications:
    A Comparison Between Limestone-Calcined-Clay-Cement and One-Part Alkai-Activated Material
  84. Bono Victor, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2024-09)
    Tailored Low-Carbon Footprint Cementitious Material for 3D Printing:
    Strategies for Rheology Adjustment and Mechanical Performance Estimation
  85. Khan Mehran, McNally Ciaran (2024-09)
    A Review of Developments in Low-Carbon 3D Printed Concrete in Europe:
    Steps Towards Sustainable Construction
  86. Perrot Arnaud, Jacquet Yohan, Caron Jean-François, Mesnil Romain et al. (2024-08)
    Snapshot on 3D Printing with Alternative Binders and Materials:
    Earth, Geopolymers, Gypsum and Low-Carbon Concrete
  87. Amiri Fatemeh, Baghdadi Abtin, Kwon Hyunchul (2024-08)
    New Reinforcement Approach for Freeform Concrete Components Through Carbon Fiber 3D Printing
  88. Jia Lutao, Niu Geng, Dong Enlai, Jiang Yifan et al. (2024-08)
    Optimization-Strategy for Incorporating Recycled Brick-Powder in 3D Printed Concrete by Balancing Low-Carbon Footprint and Enhanced Performance
  89. Xu Wen, Jiang Dengjie, Zhao Qian, Wang Linbing (2024-08)
    Study on Printability of 3D Printing Carbon-Fiber-Reinforced Eco-Friendly Concrete:
    Characterized by Fluidity and Consistency
  90. Hanratty Niall, Khan Mehran, McNally Ciaran (2024-07)
    The Role of Different Clay Types in Achieving Low-Carbon 3D Printed Concretes
  91. Liu Xuan, Chen Xianrui, Leung Gordon, Sham Ivan (2024-07)
    3D Printable Low-Carbon Concrete with Nano-Silica Pretreated Recycled Fine Aggregates
  92. Sahana C., Soda Prabhath, Dwivedi Ashutosh, Kumar Sandeep et al. (2024-07)
    3D Printing with Stabilized Earth:
    Material-Development and Effect of Carbon-Sequestration on Engineering-Performance
  93. Lim Sean, Tay Yi, Amr Issam, Fadhel Bandar et al. (2024-07)
    Carbon Sequestration with 3D Concrete Printing:
    Potentials and Challenges
  94. Hanifa Mohamad, Daruari Harish, Figueiredo Bruno, Mendonça Paulo (2024-07)
    Embodied Carbon of Structural Earthen Composites with Natural Materials and Byproducts Suitable for Robotic 3D Printing
  95. Cui Weijiu, Shen Liang, Ji Dongsheng, Liu Wenliang et al. (2024-07)
    Mechanical Performance and Permeability of Low-Carbon Printable Concrete
  96. Ghaffar Seyed, Noaimat Yazeed, Chougan Mehdi, Kheetan Mazen (2024-06)
    Emerging Resources for the Development of Low-Carbon Cementitious Composites for 3D Printing Applications
  97. Bong Shin, Du Hongjian (2024-06)
    Sustainable Additive Manufacturing of Concrete with Low-Carbon Materials
  98. Assunção Badan Julie, Chadha Kunaljit, Vasey Lauren, Brumaud Coralie et al. (2024-06)
    Contribution of Production Processes in Environmental Impact of Low-Carbon Materials Made by Additive Manufacturing
  99. Khan Mehran, McNally Ciaran (2024-05)
    Recent Developments on Low-Carbon 3D Printing Concrete:
    Revolutionizing Construction Through Innovative Technology
  100. Liu Han, Laflamme Simon, Alessandro Antonella, Ubertini Filippo (2024-05)
    3D Printed Self-Sensing Cementitious Composites Using Graphite and Carbon-Micro-Fibers
  101. Yang Jin, Zhai Gaoyuan, He Xingyang, Tang Yuanzhen et al. (2024-05)
    Properties and Microstructure of a Low-Carbon Clinker-Free Cementitious Binder and Its Extrusion-Based Printing Performance
  102. Patel Abhishek, Raphael Benny (2024-04)
    Robotic 3D Printing of Structural Slabs Using Polyethylene Waste as Filler to Reduce Carbon Footprint
  103. Curth Alexander, Alvarez Eduardo, Feickert Kiley, Mueller Caitlin et al. (2024-04)
    Multi-Material Fabrication for Low-Carbon Construction:
    An Optimised Floor System for Affordable Housing in Mexico
  104. Corneliusen Julie, Horswill Duncan (2024-04)
    Reshaping Fabrication:
    A Case Study in Designing Carbon-Reduced Concrete Structures
  105. Ali Mohd, Nassrullah Ghaith, Al-Rub Rashid, Khaswaneh Bashar et al. (2024-03)
    Influence of Carbon-Nano-Tubes on Printing Quality and Mechanical Properties of 3D Printed Cementitious Materials
  106. Neef Tobias, Müller Steffen, Mechtcherine Viktor (2024-03)
    Integrating Continuous Mineral-Impregnated Carbon-Fibers into Digital Fabrication with Concrete
  107. Geng Songyuan, Luo Qiling, Cheng Boyuan, Li Lixao et al. (2024-02)
    Intelligent Multi-Objective Optimization of 3D Printing Low-Carbon Concrete for Multi-Scenario Requirements
  108. Zhou Wen, Zhu He, Hu Wei-Hsiu, Wollaston Ryan et al. (2024-02)
    Low-Carbon, Expansive Engineered Cementitious Composites (ECC) In the Context of 3D Printing
  109. Slavcheva Galina, Artamonova Olga, Kotova Кristina, Shvedova Mariia et al. (2023-12)
    Pull-Out Behavior of Steel- and Carbon-Fibers in 3D Printable Cement Matrices of Various Compositions
  110. Bono Victor, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2023-12)
    Methodology for Formulating Low-Carbon Printable Mortar Through Particles-Packing-Optimization
  111. Natanzi Atteyeh, McNally Ciaran (2023-12)
    Experimental Investigation of Low-Carbon 3D Printed Concrete
  112. Li Yeou-Fong, Tsai Pei-Jen, Syu Jin-Yuan, Lok Man-Hoi et al. (2023-12)
    Mechanical Properties of 3D Printed Carbon Fiber-Reinforced Cement Mortar
  113. Bosbach Sven, Kalthoff Matthias, Cruz Cynthia, Adam Viviane et al. (2023-11)
    Digital Prefabrication of Lightweight Building Elements for Circular Economy:
    Material-Minimised Ribbed Floor Slabs Made of Extruded Carbon Reinforced Concrete (ExCRC)
  114. Naboni Roberto, Zomparelli Alessandro, Kunic Anja, Breseghello Luca (2023-11)
    Design, Robotic Fabrication and Augmented Construction of Low-Carbon Concrete Slabs Through Field-Based Reaction-Diffusion
  115. Bhusal Shiva, Sedghi Reza, Hojati Maryam (2023-11)
    Evaluating the Printability and Rheological and Mechanical Properties of 3D Printed Earthen Mixes for Carbon-Neutral Buildings
  116. Tay Yi, Lim Sean, Phua Seng, Tan Ming et al. (2023-10)
    Exploring Carbon-Sequestration-Potential Through 3D Concrete Printing
  117. Curbach Manfred, Hegger Josef, Bielak Jan, Schmidt Christopher et al. (2023-10)
    New Perspectives on Carbon Reinforced Concrete Structures:
    Why New Composites Need New Design-Strategies
  118. Coward Andy, Sørensen Jesper (2023-09)
    MINIMASS:
    A New Approach for Low-Carbon, Low-Cost 3D Printed Concrete Beams
  119. Meng Qingcheng, Hu Lei, Li Mingjian, Qi Xin (2023-09)
    Assessing the Environmental Impact of Building Life Cycle:
    A Carbon-Reduction-Strategy Through Innovative Design, Intelligent Construction, and Secondary Utilization
  120. Armstrong Kristina, Kamath Dipti, Zhao Xianhui, Rencheck Mitchell et al. (2023-07)
    Life Cycle Cost, Energy, and Carbon Emissions of Molds for Pre-Cast Concrete:
    Exploring the Impacts of Material-Choices and Additive Manufacturing
  121. Wang Chaofan, Chen Bing, Vo Thanh, Rezania Mohammad (2023-07)
    Mechanical Anisotropy, Rheology and Carbon Footprint of 3D Printable Concrete:
    A Review
  122. Breseghello Luca, Hajikarimian Hamed, Jørgensen Henrik, Naboni Roberto (2023-07)
    3DLightBeam+:
    Design, Simulation, and Testing of Carbon-Efficient Reinforced 3D Concrete Printed Beams
  123. Kalthoff Matthias, Bosbach Sven, Backes Jana, Cruz Cynthia et al. (2023-06)
    Fabrication of Lightweight, Carbon Textile Reinforced Concrete Components with Internally Nested Lattice Structure Using 2-Layer Extrusion by LabMorTex
  124. Pfleger Marc-Patrick, Geyer Sebastian, Hölzl Christian, Vill Markus (2023-06)
    Investigations to Improve the Carbon Footprint of Thin Walled Concrete Structures by 3D Printing Prefabricated Elements
  125. Anleu Paula, Pape Yann, Chen Qiyi, Advincula Rigoberto et al. (2023-06)
    An Innovative Carbonated Cementitious Material and Its Printability and Carbon Mineralization Capacity
  126. Liu Junli, Tran Jonathan, Nguyen Vuong, Gunasekara Chamila et al. (2023-06)
    3D Printing of Cementitious Mortar with Milled Recycled Carbon-Fibers:
    Influences of Filament Offset on Mechanical Properties
  127. Kruppa Henning, Kalthoff Matthias, Neef Tobias, Reißig Silvia et al. (2023-06)
    Alkali-Activated Binder-Requirements for Extrusion and 3D Printing of Carbon-Reinforced Concrete
  128. Neef Tobias, Kalthoff Matthias, Müller Steffen, Backes Jana et al. (2023-06)
    Extrusion of High Yield Strength Carbon-Reinforced Concrete with Mineral Impregnated Rovings
  129. Zhao Yasong, Gao Yangyunzhi, Chen Gaofeng, Li Shujun et al. (2023-04)
    Development of Low-Carbon Materials from GGBS and Clay-Brick-Powder for 3D Concrete Printing
  130. Cui Weijiu, Wang Tianheng, Chen Xu, Shen Wenkai et al. (2023-03)
    Study of 3D Printed Concrete with Low-Carbon Cementitious Materials Based on Its Rheological Properties and Mechanical Performances
  131. Basha Shaik, Rehman Atta, Aziz Md, Kim Jung-Hoon (2023-02)
    Cement Composites with Carbon-Based Nanomaterials for 3D Concrete Printing Applications:
    A Review
  132. Oval Robin, Nuh Mishael, Costa Eduardo, Madyan Omar et al. (2023-01)
    A Prototype Low-Carbon Segmented Concrete Shell Building Floor System
  133. Noaimat Yazeed, Ghaffar Seyed, Chougan Mehdi, Kheetan Mazen (2022-12)
    A Review of 3D Printing Low-Carbon Concrete with One-Part Geopolymer:
    Engineering, Environmental and Economic Feasibility
  134. Liu Xiongfei, Li Jixiang, Li Qi, Hou Gunayu (2022-11)
    Mechanical Performance Optimization in Spray-Based Three-Dimensional-Printed Mortar Using Carbon-Fiber
  135. Zhang Chao, Jia Zijian, Luo Zhe, Deng Zhicong et al. (2022-11)
    Printability and Pore-Structure of 3D Printing Low-Carbon Concrete Using Recycled Clay-Brick-Powder with Various Particle-Features
  136. Kan Deyuan, Liu Guifeng, Cao Shuang, Chen Zhengfa et al. (2022-11)
    Mechanical Properties and Pore-Structure of Multi-Walled Carbon-Nano-Tube-Reinforced Reactive Powder-Concrete for Three-Dimensional Printing Manufactured by Material-Extrusion
  137. Goracci Guido, Salgado David, Gaitero Juan, Dolado Jorge (2022-11)
    Electrical Conductive Properties of 3D Printed Concrete Composite with Carbon Nanofibers
  138. Wang Dingyi, Zhang Tingting, Guo Xudong, Ling Dayi et al. (2022-10)
    The Potential of 3D Printing in Facilitating Carbon Neutrality
  139. Engelhard Michael, Kalytta-Mewesand Andreas, Volkmer Dirk (2022-09)
    Testing Methods for Deformation Characterization on 3D Printed Carbon Fiber-Reinforced Cementitious Composites
  140. Dulaj Albanela, Suijs Monica, Salet Theo, Lucas Sandra (2022-06)
    Incorporation and Characterization of Multi-Walled Carbon Nanotube Concrete Composites for 3D Printing Applications
  141. Hynek Estelle, Bulteel David, Urquizar Antoine, Rémond Sébastien (2022-06)
    Formulation and Characterization of a Low-Carbon Impact Cementitious Ink for 3D Printing
  142. Neef Tobias, Müller Steffen, Mechtcherine Viktor (2022-06)
    Integration of Mineral Impregnated Carbon-Fiber (MCF) into Fine 3D Printed Concrete Filaments
  143. Neef Tobias, Butler Marko, Mechtcherine Viktor (2022-06)
    Integrating Mineral-Bonded Carbon Fibers into 3D Concrete Printing
  144. Breseghello Luca, Naboni Roberto (2022-05)
    Tool-Path -Based Design for 3D Concrete Printing of Carbon-Efficient Architectural Structures
  145. Kalthoff Matthias, Raupach Michael, Matschei Thomas (2021-12)
    Investigation into the Integration of Impregnated Glass and Carbon Textiles in a Laboratory Mortar Extruder (LabMorTex)
  146. Rutzen Matthias, Schulz Michael, Moosburger-Will Judith, Lauff Philipp et al. (2021-11)
    3D Printing as an Automated Manufacturing Method for a Carbon-Fiber-Reinforced Cementitious Composite with Outstanding Flexural Strength (105 N/mm²)
  147. Lauff Philipp, Pugacheva Polina, Rutzen Matthias, Weiss Ursula et al. (2021-11)
    Evaluation of the Behavior of Carbon-Short-Fiber-Reinforced Concrete (CSFRC) Based on a Multi-Sensory Experimental Investigation and a Numerical Multi-Scale Approach
  148. Neef Tobias, Mechtcherine Viktor (2021-11)
    Simultaneous Integration of Continuous Mineral-Bonded Carbon Reinforcement Into Additive Manufacturing with Concrete
  149. Ranaudo Francesco, Mele Tom, Block Philippe (2021-09)
    A Low-Carbon, Funicular Concrete Floor System:
    Design and Engineering of the HiLo Floor
  150. Zhang Yifan, Aslani Farhad (2021-08)
    Development of Fiber-Reinforced Engineered Cementitious Composite Using Polyvinyl-Alcohol-Fiber and Activated Carbon-Powder for 3D Concrete Printing
  151. Scheurer Martin, Quenzel Philipp, Nölke Peter, Reuter‐Schniete Jonas et al. (2021-07)
    Investigating the Feasibility of Using Carbon Fiber Tapes as Reinforcement for 3D Concrete Printing
  152. Rutzen Matthias, Lauff Philipp, Niedermeier Roland, Fischer Oliver et al. (2021-03)
    Influence of Fiber-Alignment on Pseudoductility and Micro-Cracking in a Cementitious Carbon-Fiber Composite Material
  153. Neef Tobias, Müller Steffen, Mechtcherine Viktor (2020-11)
    3D Printing with Carbon Concrete:
    Technology and the First Test Results
  154. Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schmeier Tobias (2020-06)
    Extrusion-Based Additive Manufacturing with Carbon Reinforced Concrete:
    Concept and Feasibility Study
  155. Kosson Michael, Brown Lesa, Sanchez Florence (2020-01)
    Early-Age Performance of 3D Printed Carbon-Nano-Fiber and Carbon Micro-Fiber Cement Composites
  156. Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schneider Kai et al. (2019-11)
    New Carbon Fiber Reinforcement for Digital, Automated Concrete Construction
  157. Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schneider Kai et al. (2019-11)
    Mineral-Impregnated Carbon-Fiber Composites as Novel Reinforcement for Concrete Construction:
    Material and Automation Perspectives
  158. Rutzen Matthias, Volkmer Dirk, Weiss Ursula, Reischmann Lisa et al. (2019-09)
    Micro-Structural Analysis of Crack-Growth Caused by Static and Dynamic Loads in a Carbon-Fiber-Reinforced Cement-Paste
  159. Hambach Manuel, Möller Hendrik, Neumann Thomas, Volkmer Dirk (2016-08)
    Portland-Cement-Paste with Aligned Carbon-Fibers Exhibiting Exceptionally High Flexural Strength (>100 MPa)