A (P)Review (2025-05)¶
Adhesion of Printcrete for Tunnel Structures
, , , , , ,
Journal Article - Case Studies in Construction Materials, No. e04853
Abstract
The construction of tunnel structures is a labor-intensive and challenging process, particularly in extreme environments such as high geothermal zones or cold regions, where human presence is often unsuitable or even hazardous. These conditions call for innovative construction techniques that can minimize on-site human intervention. Digital fabrication with concrete, particularly through 3D concrete printing, presents a transformative potential for automating the construction of tunnel structures. Unlike conventional methods such as mold-casting or shotcrete, which inherently ensure good adhesion between the material and the rock substrate, extrusion-based printable concrete (printcrete) faces significant challenges in achieving satisfactory adhesion, especially during its fresh and early hardening stages. Adhesion performance is critical for the structural integrity of printed tunnel structures, and a deeper understanding of this aspect is necessary. To this end, this paper consolidates prior research, focusing on three interacting components influencing the adhesion: the substrate, the printcrete, and any bonding agent at the interface. Based on these studies, the paper further discusses the unique adhesion challenges encountered in tunnel construction using printcrete and presents potential solutions.
¶
55 References
- Asprone Domenico, Menna Costantino, Bos Freek, Salet Theo et al. (2018-06)
Rethinking Reinforcement for Digital Fabrication with Concrete - Chen Yu, Figueiredo Stefan, Li Zhenming, Chang Ze et al. (2020-03)
Improving Printability of Limestone-Calcined-Clay-Based Cementitious Materials by Using Viscosity-Modifying Admixture - Dai Xiaodi, Tao Yaxin, Tittelboom Kim, Schutter Geert (2023-02)
Rheological and Mechanical Properties of 3D Printable Alkali-Activated Slag Mixtures with Addition of Nano Clay - Feys Dimitri, Schutter Geert, Fataei Shirin, Martys Nicos et al. (2022-01)
Pumping of Concrete:
Understanding a Common Placement Method with Lots of Challenges - Gebhard Lukas, Esposito Laura, Menna Costantino, Mata-Falcón Jaime (2022-07)
Inter-Laboratory Study on the Influence of 3D Concrete Printing Set-Ups on the Bond Behavior of Various Reinforcements - Geng Zifan, Pan Hao, Zuo Wenqiang, She Wei (2022-05)
Functionally Graded Lightweight Cement-Based Composites with Outstanding Mechanical Performances via Additive Manufacturing - He Lewei, Chow Wai, Li Hua (2020-06)
Effects of Inter-Layer Notch and Shear Stress on Inter-Layer Strength of 3D Printed Cement-Paste - Huang Hai, Huang Tingjie, Yuan Qiang, Zhou Dajun et al. (2019-01)
Temperature-Dependence of Structural Build-Up and Its Relation with Hydration Kinetics of Cement-Paste - Kloft Harald, Krauss Hans-Werner, Hack Norman, Herrmann Eric et al. (2020-05)
Influence of Process Parameters on the Inter-Layer Bond Strength of Concrete Elements Additive Manufactured by Shotcrete 3D Printing - Kruger Jacques, Zijl Gideon (2020-10)
A Compendious Review on Lack-of-Fusion in Digital Concrete Fabrication - Lao Wenxin, Li Mingyang, Tjahjowidodo Tegoeh (2020-09)
Variable-Geometry Nozzle for Surface Quality Enhancement in 3D Concrete Printing - Lim Sungwoo, Buswell Richard, Le Thanh, Austin Simon et al. (2011-07)
Developments in Construction-Scale Additive Manufacturing Processes - Liu Huawei, Liu Chao, Wu Yiwen, Bai Guoliang et al. (2022-06)
Hardened Properties of 3D Printed Concrete with Recycled Coarse Aggregate - Liu Yi, Wang Li, Yuan Qiang, Peng Jianwei (2023-09)
Effect of Coarse Aggregate on Printability and Mechanical Properties of 3D Printed Concrete - Lu Bing, Qian Ye, Li Mingyang, Weng Yiwei et al. (2019-04)
Designing Spray-Based 3D Printable Cementitious Materials with Fly-Ash-Cenosphere and Air-Entraining Agent - Ma Guowei, Buswell Richard, Silva Wilson, Wang Li et al. (2022-03)
Technology Readiness:
A Global Snapshot of 3D Concrete Printing and the Frontiers for Development - Mechtcherine Viktor, Grafe Jasmin, Nerella Venkatesh, Spaniol Erik et al. (2018-05)
3D Printed Steel-Reinforcement for Digital Concrete Construction:
Manufacture, Mechanical Properties and Bond Behavior - Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-01)
Early-Age Hydration, Rheology and Pumping Characteristics of CSA Cement-Based 3D Printable Concrete - Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2020-10)
Extrusion-Based Concrete 3D Printing from a Material Perspective:
A State of the Art Review - Mohan Manu, Rahul Attupurathu, Tao Yaxin, Schutter Geert et al. (2022-06)
Hydration Re-Initiation of Borated CSA Systems with a Two-Stage Mixing Process:
An Application in Extrusion-Based Concrete 3D Printing - Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2020-09)
Effect of Microwave-Heating on Inter-Layer Bonding and Buildability of Geopolymer 3D Concrete Printing - Putten Jolien, Schutter Geert, Tittelboom Kim (2019-07)
Surface-Modification as a Technique to Improve Inter-Layer Bonding Strength in 3D Printed Cementitious Materials - Rahul Attupurathu, Mohan Manu, Schutter Geert, Tittelboom Kim (2021-10)
3D Printable Concrete with Natural and Recycled Coarse Aggregates:
Rheological, Mechanical and Shrinkage Behavior - Roussel Nicolas (2018-05)
Rheological Requirements for Printable Concretes - Roussel Nicolas, Bessaies-Bey Hela, Kawashima Shiho, Marchon Delphine et al. (2019-08)
Recent Advances on Yield-Stress and Elasticity of Fresh Cement-Based Materials - Schutter Geert, Lesage Karel (2018-09)
Active Control of Properties of Concrete:
A (P)Review - Schutter Geert, Lesage Karel, Mechtcherine Viktor, Nerella Venkatesh et al. (2018-08)
Vision of 3D Printing with Concrete:
Technical, Economic and Environmental Potentials - Shao Lijing, Feng Pan, Zuo Wenqiang, Wang Haochuan et al. (2022-02)
A Novel Method for Improving the Printability of Cement-Based Materials:
Controlling the Releasing of Capsules Containing Chemical Admixtures - Suiker Akke, Wolfs Robert, Lucas Sandra, Salet Theo (2020-06)
Elastic Buckling and Plastic Collapse During 3D Concrete Printing - Tao Yaxin, Dai Xiaodi, Schutter Geert, Tittelboom Kim (2023-06)
Set-on-Demand of Alkali-Activated Slag Mixture Using Twin-Pipe Pumping - Tao Yaxin, Dai Xiaodi, Schutter Geert, Tittelboom Kim (2024-05)
Adhesion Performance of Alkali-Activated Material for 3D Printing of Tunnel Linings at Different Temperatures - Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2021-11)
Influence of Substrate-Surface-Roughness and Moisture-Content on Tensile Adhesion Performance of 3D Printable Concrete - Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2023-03)
Twin-Pipe Pumping-Strategy for Stiffening-Control of 3D Printable Concrete:
From Transportation to Fabrication - Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2023-02)
Development of a Calcium Sulfoaluminate-Portland Cement Binary System for Twin-Pipe 3D Concrete Printing - Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2023-10)
Influence of Rheology on Mixing Homogeneity and Mechanical Behavior of Twin-Pipe 3D Printable Concrete - Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2024-02)
Hydration and Microstructure of Calcium-Sulfoaluminate-Portland-Cement Binder Systems for Set-on-Demand Applications - Tao Yaxin, Mohan Manu, Rahul Attupurathu, Yuan Yong et al. (2022-08)
Stiffening Controllable Concrete Modified with Redispersible Polymer Powder for Twin-Pipe Printing - Tao Yaxin, Rahul Attupurathu, Lesage Karel, Tittelboom Kim et al. (2021-11)
Mechanical and Microstructural Properties of 3D Printable Concrete in the Context of the Twin-Pipe Pumping-Strategy - Tao Yaxin, Rahul Attupurathu, Lesage Karel, Yuan Yong et al. (2021-02)
Stiffening Control of Cement-Based Materials Using Accelerators in In-Line Mixing Processes:
Possibilities and Challenges - Tao Yaxin, Ren Qiang, Lesage Karel, Tittelboom Kim et al. (2022-07)
Shape Stability of 3D Printable Concrete with River and Manufactured Sand Characterized by Squeeze Flow - Tao Yaxin, Ren Qiang, Vantyghem Gieljan, Lesage Karel et al. (2023-02)
Extending 3D Concrete Printing to Hard Rock Tunnel Linings:
Adhesion of Fresh Cementitious Materials for Different Surface Inclinations - Tao Yaxin, Vantyghem Gieljan, Lesage Karel, Yuan Yong et al. (2021-11)
Adhesion Properties of Printable Polymer-Modified Concrete for Rock Tunnel Linings - Tao Yaxin, Zhang Yi, Schutter Geert, Tittelboom Kim (2024-01)
Interfacial Bonding of 3D Printable Concrete with Chemically Reactive Coating for Automatic Repair - Tao Yaxin, Zhang Yi, Wang Xiaoyun, Godinho Jose et al. (2024-01)
Adhesion Evaluation and Interface Characterization of 3D Printed Concrete for Automatic Repair - Tay Yi, Lim Jian, Li Mingyang, Tan Ming (2022-03)
Creating Functionally Graded Concrete Materials with Varying 3D Printing Parameters - Torelli Giacomo, Fernández Mar, Lees Janet (2020-02)
Functionally Graded Concrete:
Design Objectives, Production Techniques and Analysis Methods for Layered and Continuously Graded Elements - Wangler Timothy, Pileggi Rafael, Gürel Şeyma, Flatt Robert (2022-03)
A Chemical Process Engineering Look at Digital Concrete Processes:
Critical Step Design, In-Line Mixing, and Scale-Up - Wangler Timothy, Tao Yaxin, Das Arnesh, Mahmoudi Matineh et al. (2024-08)
Aluminate 2K Systems in Digital Concrete:
Process, Design, Chemistry, and Outlook - Weng Yiwei, Li Mingyang, Zhang Dong, Tan Ming et al. (2021-02)
Investigation of Inter-Layer Adhesion of 3D Printable Cementitious Material from the Aspect of Printing-Process - Wolfs Robert, Bos Freek, Salet Theo (2019-03)
Hardened Properties of 3D Printed Concrete:
The Influence of Process Parameters on Inter-Layer Adhesion - Xiao Jianzhuang, Hou Shaodan, Duan Zhenhua, Zou Shuai (2023-01)
Rheology of 3D Printable Concrete Prepared by Secondary Mixing of Ready-Mix Concrete - Ye Junhong, Cui Can, Yu Jiangtao, Yu Kequan et al. (2021-01)
Fresh and Anisotropic-Mechanical Properties of 3D Printable Ultra-High-Ductile Concrete with Crumb-Rubber - Zareiyan Babak, Khoshnevis Behrokh (2017-08)
Effects of Interlocking on Inter-Layer Adhesion and Strength of Structures in 3D Printing of Concrete - Zhang Nan, Xia Ming, Sanjayan Jay (2021-10)
Short-Duration Near-Nozzle Mixing for 3D Concrete Printing - Zimmermann Stefan, Griego Danielle, Flatt Robert (2024-09)
Visualizing Defects of Concrete 3D Printed Structures with Augmented Reality Based on Machine Learning-Driven Image-Analysis
0 Citations
BibTeX
@article{tao_wang_wang_lesa.2025.APR,
author = "Yaxin Tao and Li Wang and Timothy Paul Wangler and Karel Lesage and Geert de Schutter and Kim van Tittelboom and Yong Yuan",
title = "A (P)Review: Adhesion of Printcrete for Tunnel Structures",
doi = "10.1016/j.cscm.2025.e04853",
year = "2025",
journal = "Case Studies in Construction Materials",
pages = "e04853",
}
Formatted Citation
Y. Tao, “A (P)Review: Adhesion of Printcrete for Tunnel Structures”, Case Studies in Construction Materials, p. e04853, 2025, doi: 10.1016/j.cscm.2025.e04853.
Tao, Yaxin, Li Wang, Timothy Paul Wangler, Karel Lesage, Geert de Schutter, Kim van Tittelboom, and Yong Yuan. “A (P)Review: Adhesion of Printcrete for Tunnel Structures”. Case Studies in Construction Materials, 2025, e04853. https://doi.org/10.1016/j.cscm.2025.e04853.