Skip to content

#water

Keywords by Co - Occurrence

  1. Ghodke Swapnil, Singh Bhupinder, Chowdhury Shubhankar (2025-11)
    Some Insights on Role of Water Film-Thickness in Rheology of Coarse Aggregate-Based 3D Printable Concrete
  2. Thib Raghed, Rémond Sébastien, Belayachi Naima, Rémond Elise et al. (2025-11)
    3D Printable Eco-Efficient Mortars Under Salt Water:
    Mix Design and Characterization
  3. Zhang Junyi, Zhang Chao, Zhang Yuying, Li Muduo et al. (2025-09)
    Designing Printable Cement Composites with Porous Biochar Using an Extended Water Film Thickness Theory
  4. Sikora Paweł (2025-09)
    Globally First 3D‐Printed Concrete Drinking Water Tank in Barczewko, Poland
  5. Shi Ye, You Ge, Wu Pengtao, Liu Zhongxian et al. (2025-07)
    Effect of Water Film and Paste Film Thicknesses on Printability of 3D Printed Low Cement UHPC
  6. Liu Nana, Wang Jie (2025-07)
    Experimental Study on the Effect of Water-Binder Ratio on 3D Printing Form of Concrete Mortar
  7. Rajeev Pathmanathan, Kopitha Kirushnapillai, Sanjayan Jay (2025-06)
    Carbonated Water and MgO for Improved Performance of 3D Concrete Printing.
  8. Guillen Ruth, Naldoni Lapo, Quka Katerina, Gioia Flavio et al. (2025-06)
    Water Resistance of 3D Printed Clay with Bio-Stabilizers
  9. Ersoy Seher, Abuqasim Shaima, Kurtay Yıldız Mine, Öztürk İrfan et al. (2025-05)
    Machine Learning Approximation of Water Transport in 3D-Printable Composites via Karsten Tube
  10. Jia Lutao, Dong Enlai, Xia Kailun, Niu Geng et al. (2025-04)
    Initial Plastic Shrinkage of 3D-Printed Concrete Incorporating Recycled Brick Fine Aggregates:
    Insights from Water Transport and Structural Evolution
  11. Khanverdi Mohsen, Das Sreekanta (2025-03)
    Experimental Study on Water Penetration and Thermal Resistance of Large-Scale 3D-Printed Cementitious Walls
  12. Vlieger Jentel, Blaakmeer Jan, Gruyaert Elke, Cizer Özlem (2025-01)
    Assessing Static and Dynamic Yield-Stress of 3D Printing Mortar with Recycled Sand:
    Influence of Sand-Geometry, Fineness Modulus, and Water-to-Binder Ratio
  13. Gurunandan M., Mala Hiranya, Nanthagopalan Prakash (2024-12)
    Effect of Water-to-Binder, Aggregate-to-Binder-Ratio and Admixtures on Printability and Mechanical Properties of 3D Printable Mortar Mixtures
  14. Cheibas Ina, Gamote Ringo, Lloret-Fritschi Ena, Arnold Kilian et al. (2024-11)
    3D Printing of a Multi-Performative Facade:
    Assessment of Air Permeability, Water Tightness, Wind Loads, and Impact Resistance
  15. Cheibas Ina, Gamote Ringo, Lloret-Fritschi Ena, Arnold Kilian et al. (2024-11)
    3D Printing of a Multi-Performative Building Envelope:
    Assessment of Air-Permeability, Water-Tightness, Wind-Loads, and Impact-Resistance
  16. Nienaber Linda, Kanyenze Simba, Combrinck Riaan (2024-11)
    Water Absorption Reduction of 3D Printed Concrete Using Silicones
  17. Peng Chengming, Yang Zhenjun, Li Hui (2024-10)
    A Predictive Model for Interlayer-Water-Evolution and Experimental Validation of 3D Printed Cementitious Materials
  18. Liu Xuelin, Sheng Haitao, Feng Binqing, Wang Liang et al. (2024-09)
    Development of Novel Alkaline-Electrolyzed-Water on the Properties of 3D Printed Calcium-Sulphoaluminate-Cement Composites
  19. Liu Chao, Banthia Nemkumar, Shi Yifan, Jia Zijian et al. (2024-09)
    Early-Age Shrinkage Mitigation and Quantitative Study on Water Loss Kinetics of 3D Printed Foam-Concrete Modified with Superabsorbent Polymers
  20. Liu Xuelin, Sheng Haitao, Feng Binqing, Zhao Piqi et al. (2024-09)
    Effect of Potassium and Sodium-Based Electrolyzed Water on the Rheological Properties and Structural Build-Up of 3D Printed Cement Composites
  21. Wang Xianggang, Dong Enlai, Jia Zijian, Jia Lutao et al. (2024-09)
    Specimen-Size-Effect on Compressive Strength of 3D Printed Concrete Containing Coarse Aggregate with Varying Water-to-Binder-Ratios
  22. Lima Lucas, Wangler Timothy, Sanchez Asel, Anton Ana-Maria et al. (2024-09)
    Durability of 3D Printed Concrete:
    Performance-Assessment of a Two-Component System Against Water Absorption, Carbonation, and Chloride-Ingress
  23. Du Guoqiang, Sun Yan, Qian Ye (2024-08)
    3D Printed Strain-Hardening Cementitious Composites (3DP-SHCC) Reticulated Shell Roof Inspired by the Water Spider
  24. Boddepalli Uday, Panda Biranchi, Gandhi Indu (2024-07)
    Impact of Water to Solids Ratio on Stability, Printability, and Mechanical Characteristics of 3D Printable Foam-Concrete
  25. Gonzales Betty, Zavaleta Diana, Bertolotti Bruno, Aguilar Rafael et al. (2024-07)
    Comprehensive Investigation into the Influence of Soil Composition and Water Content on Cracking Due to Drying Shrinkage in 3D Printed Earthen Structures
  26. Ding Yahong, Zhang Yaqi, Zhao Yu, Zhang Meixiang et al. (2024-04)
    Impact of Pre-Soaked Lime-Water-Carbonized Recycled Fine Aggregate on Mechanical Properties and Pore-Structure of 3D Printed Mortar
  27. Ma Lei, Jia Zijian, Chen Yuning, Jiang Yifan et al. (2024-03)
    Water Loss and Shrinkage Prediction in 3D Printed Concrete with Varying w/b and Specimen Sizes
  28. Shi Yifan, Jia Lutao, Jia Zijian, Ma Lei et al. (2024-03)
    Early-Age Inhomogeneous Deformation of 3D Printed Concrete:
    Characteristics and Influences of Superplasticizer and Water-Binder Ratio
  29. Jia Lutao, Jia Zijian, Zhang Zedi, Tang Zhenzhong et al. (2024-02)
    Effect of Recycled Brick-Powder with Various Particle-Features on Early-Age Hydration, Water-State, and Rheological Properties of Blended Cement-Paste in the Context of 3D Printing
  30. Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi (2023-12)
    3D Concrete Printing in Air and Under Water:
    A Comparative Study on the Buildability and Inter-Layer Adhesion
  31. Zavaleta Diana, Ñañez Robert, Silva Guido, Ruiz Gaby et al. (2023-11)
    Additive Construction Using Enhanced Earthen-Based Composites:
    Improvement of the Mechanical Strength and Water Durability Using Chitosan and Agave-Fibers
  32. Kanyenze Simba, Joubert Dawid, Combrinck Riaan (2023-07)
    The Effect of Nanobubble Water on the Fresh Properties of Conventional Concrete and 3D Printing Concrete
  33. Jaji Mustapha, Kamoru A., Zijl Gideon, Babafemi Adewumi (2023-07)
    Effect of Anisotropy on Permeability Index and Water-Absorption of 3D Printed Metakaolin-Based Geopolymer Concrete
  34. Xu Nuoyan, Qian Ye (2023-04)
    Effects of Fiber-Volume Fraction, Fiber Length, Water-Binder Ratio, and Nano-Clay Addition on the 3D Printability of Strain-Hardening Cementitious Composites
  35. Gebhard Lukas, Mata-Falcón Jaime, Iqbal Arsalan, Kaufmann Walter (2023-01)
    Structural Behavior of Post-Installed Reinforcement for 3D Concrete Printed Shells:
    A Case Study on Water Tanks
  36. Diniz Hugo, Martinelli Antônio, Cabral Kleber, Ferreira Ruan et al. (2023-01)
    Synergistic Effects of the Use of Metakaolin, Sand and Water on the Properties of Cementitious Composites for 3D Printing
  37. Tinoco Matheus, Gouvêa Lucas, Cássia Magalhães Martins Karenn, Toledo Filho Romildo et al. (2022-12)
    The Use of Rice Husk Particles to Adjust the Rheological Properties of 3D Printable Cementitious Composites Through Water Sorption
  38. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-12)
    Influence of the Pore Feature on the Water-Uptake in 3D Printed Concrete
  39. Zhang Yu, Zhang Yunsheng, Qian Rusheng, Liu Guojian et al. (2022-09)
    Influence of Steel-Fiber on the Water-Absorption of 3D Printed Concrete
  40. Dulaj Albanela, Salet Theo, Lucas Sandra (2022-09)
    Mechanical Properties and Self-Sensing Ability of Graphene-Mortar Compositions with Different Water-Content for 3D Printing Applications
  41. Kovaleva Daria, Nistler Maximilian, Verl Alexander, Blandini Lucio et al. (2022-06)
    Zero-Waste Production of Lightweight Concrete Structures with Water-Soluble Sand Formwork
  42. Liu Chao, Chen Yuning, Xiong Yuanliang, Jia Lutao et al. (2022-06)
    Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Buildability of 3D Printing Foam-Concrete:
    From Water State and Flocculation Point of View
  43. Zhang Yu, Qiao Hongxia, Qian Rusheng, Xue Cuizhen et al. (2022-02)
    Relationship Between Water-Transport Behavior and Inter-Layer Voids of 3D Printed Concrete
  44. Bong Shin, Xia Ming, Nematollahi Behzad, Shi Caijun (2021-04)
    Ambient Temperature Cured ‘Just-Add-Water’ Geopolymer for 3D Concrete Printing Applications
  45. Bong Shin, Nematollahi Behzad, Arunothayan Arun, Xia Ming et al. (2020-07)
    Effect of Wollastonite Micro-Fiber Addition on Properties of 3D Printable ‘Just-Add-Water’ Geopolymers
  46. Nematollahi Behzad, Bong Shin, Xia Ming, Sanjayan Jay (2020-07)
    Digital Fabrication of ‘Just-Add-Water’ Geopolymers:
    Effects of Curing Condition and Print-Time Interval
  47. Weger Daniel, Kim Heejeong, Talke Daniel, Henke Klaudius et al. (2020-07)
    Lightweight Concrete 3D Printing by Selective Cement-Activation:
    Investigation of Thermal Conductivity, Strength and Water-Distribution
  48. Putten Jolien, Azima M., Heede Philip, Mullem T. et al. (2020-06)
    Neutron-Radiography to Study the Water-Ingress via the Inter-Layer of 3D Printed Cementitious Materials for Continuous Layering
  49. Ma Siwei, Kawashima Shiho (2018-09)
    Rheological and Water Transport Properties of Cement-Pastes Modified with Diutan Gum and Attapulgite-Palygorskite-Nano-Clay for 3D Concrete Printing
  50. Schröfl Christof, Nerella Venkatesh, Mechtcherine Viktor (2018-09)
    Capillary Water Intake by 3D Printed Concrete Visualised and Quantified by Neutron Radiography
  51. Wolfswinkel Jan, Land Wim, Stuit Herke, Bastiaens Guido et al. (2017-06)
    Design Process of a 3D Printed Concrete Water Taxi Stop