Skip to content

#shrinkage

Keywords by Co - Occurrence

  1. Wu Jie, Mi Jiwei, Hua Sudong, Yue Hongfei et al. (2026-04)
    Effects and Mechanisms of Modified Superabsorbent Polymers on Shrinkage Behavior of 3D-Printable Mortar
  2. Azarhomayun Fazel, Alipanahi Pouya, Zeng Hang, Kim Heejeong et al. (2026-04)
    Experimental and Numerical Investigation of Plastic Shrinkage Control in 3D-Printed Concrete Using Natural Zeolite
  3. Liu Yalin, Fan Weichen, Li Chengze, Wei Ya et al. (2026-03)
    Printability, Mechanical, and Shrinkage Properties of 3D Printing Internally-Cured Ultra-High Performance Concrete
  4. Liu Chao, Ma Ruiyang, Liu Huawei, Dai Meiling et al. (2026-02)
    Shrinkage in Concrete Additive Manufacturing:
    A Critical Review of Mechanisms, Characterization, and Control Strategies
  5. Dang Thi, Tran Mien, Nguyen Thi, Nguyen Hoang (2026-02)
    Large Scale 3D Printed Concrete Wall:
    Interlayer Bonding and Shrinkage
  6. Federowicz Karol, Sibera Daniel, Tošić Nikola, Zieliński Adam et al. (2026-01)
    Early-Age Shrinkage Monitoring of 3D-Printed Cementitious Mixtures: Comparison of Measuring Techniques and Low-Cost Alternatives
  7. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud (2026-01)
    Effect of Fly Ash, Basalt Fiber and Attapulgite Nanoclay on the Fresh Properties, Rheology and Shrinkage Behaviour of Printable Concrete
  8. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun et al. (2025-12)
    Effect of Aggregate-to-Binder Ratio on 3D Printed Concrete:
    Printability, Mechanics, and Shrinkage
  9. Sikora Paweł, Federowicz Karol, Skibicki Szymon, Techman Mateusz et al. (2025-11)
    Demonstration of 3D-Printed Concrete Containing Fine Recycled Concrete Aggregates and Recycled Concrete Powder:
    Rheology, Early-Age, Shrinkage, Mechanical, and Durability Performance.
  10. Patel Aniket, Tripathi Avinaya, Kiran Ravi, Santhanam Manu et al. (2025-11)
    Decoupling Early-Age Free Shrinkage and Restraint Effects in 3D Printed Concrete Using Digital Image Correlation
  11. Oh Sangwoo, Lee Jinsuk, Oh Gyujong, Choi Seongcheol (2025-11)
    Effects of the Combined Incorporation of Superabsorbent Polymers and Polyvinyl Alcohol Fibers on Material Properties of 3D Printable Mortar:
    Rheology, Shrinkage, and Mechanical Behavior
  12. Sakolaree Natthanicha, Taweesint Jutamas, Sungsiri Krisana, Assawamankongcharoen Sirikamol et al. (2025-11)
    Evaluation of Fresh and Mechanical Properties and Shrinkage of Hydrophobic Mortar Containing Microfiber for 3D Printing Technology
  13. Els Heinrich, Zijl Gideon, Villiers Wibke (2025-06)
    A Review of Shrinkage and Restrained Shrinkage Cracking in 3D Concrete Printing
  14. Zhao Herui, Jiang Quan, Xia Yong, Hou Dongqi et al. (2025-04)
    Microbial-Induced Calcareous Precipitation Effect on Tensile Strength and Early Age Shrinkage of 3D Printed Concrete
  15. Jia Lutao, Dong Enlai, Xia Kailun, Niu Geng et al. (2025-04)
    Initial Plastic Shrinkage of 3D-Printed Concrete Incorporating Recycled Brick Fine Aggregates:
    Insights from Water Transport and Structural Evolution
  16. Aman Abdulkerim, Yang Zhe, Xin Yubo, Zhang Xiaoman et al. (2025-04)
    Introducing Magnesium Oxide into 3D Printed Concrete to Mitigate Dry-Shrinkage
  17. Xia Kailun, Chen Yuning, Zhang Zedi, Wang Wei et al. (2025-03)
    In-Situ Crosslinked Nano-SiO2 Reinforced Alginate Bio-Textile for Mitigating Plastic Shrinkage in 3D Printed Concrete
  18. Givkashi Mohammad, Moodi Faramarz, Ramezanianpour Amir (2025-03)
    Investigating Shrinkage and Mechanical Properties of 3D Printed Concretes Under Different Curing Conditions
  19. Yu Jie, Xu Fengming, Zhang Hanghua, Ye Junhong et al. (2025-01)
    Leveraging Incinerator Bottom Ash for Mitigating Early-Age Shrinkage in 3D Printed Engineered Cementitious Composites
  20. You Dengyu, Kashani Alireza (2024-11)
    Effect of Environmental Conditions on Shrinkage-Induced Cracking of 3D Printed Mortar
  21. Federowicz Karol, Cendrowski Krzysztof, Sikora Paweł (2024-10)
    Low-Carbon Cementitious Composite Incorporated with Biochar and Recycled Fines Suitable for 3D Printing Applications:
    Hydration, Shrinkage and Early-Age Performance
  22. Markin Slava, Cordova Julian, Combrinck Riaan, Mechtcherine Viktor (2024-09)
    Deformation Behavior of 3D Printed Concrete Elements Induced by Plastic Shrinkage
  23. Liu Chao, Banthia Nemkumar, Shi Yifan, Jia Zijian et al. (2024-09)
    Early-Age Shrinkage Mitigation and Quantitative Study on Water Loss Kinetics of 3D Printed Foam-Concrete Modified with Superabsorbent Polymers
  24. Harbouz Ilhame, Alam Syed, Loukili Ahmed (2024-09)
    Influence of Printing Parameters on Early-Age Shrinkage in 3D Printed Mortar
  25. Palomba Martina, Esposito Laura, Villani Chiara, Wagner Eckhard (2024-09)
    Environmental Conditions Affecting the Shrinkage Behavior of Low Clinker 3D Printable Mortar
  26. Viano Rafaël, Margerit Pierre, Mesnil Romain, Weisz-Patrault Daniel et al. (2024-09)
    Shrinkage Characterization and Compensation for 3DPC
  27. Kurup Davya, Rahul Attupurathu (2024-09)
    Early-Age Shrinkage Measurement in 3D Printed Con-Crete by Digital Image Correlation:
    Influence of Spray Paints
  28. Markin Slava, Mechtcherine Viktor (2024-09)
    Mitigating Plastic Shrinkage and Cracking in 3D Printed Concrete Through Surface Rewetting
  29. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2024-07)
    Influence of Curing Conditions on the Shrinkage Behavior of Three-Dimensional Printed Concrete Formwork
  30. Dorresteijn Evelien, Tsiotou Sofia, Lowke Dirk (2024-07)
    Keeping the Processability of a Clay Mortar for Extrusion 3D Printing While Decreasing Shrinkage and Increasing the Green Strength
  31. Markin Slava, Combrinck Riaan, Mechtcherine Viktor (2024-07)
    Specifics of Plastic Shrinkage in 3D Printed Concrete Elements
  32. Gonzales Betty, Zavaleta Diana, Bertolotti Bruno, Aguilar Rafael et al. (2024-07)
    Comprehensive Investigation into the Influence of Soil Composition and Water Content on Cracking Due to Drying Shrinkage in 3D Printed Earthen Structures
  33. Gleiser Leonie, Pierer Robin, Markin Slava, Butler Marko et al. (2024-07)
    Additive Manufacturing with Earth-Based Materials:
    Minimization of Shrinkage Deformation
  34. Liu Qiong, Tang Huilin, Chen Kailun, Peng Bin et al. (2024-05)
    Utilizing CO2 to Improve Plastic Shrinkage and Mechanical Properties of 3D Printed Mortar Made with Recycled Fine Aggregates
  35. Chen Yuxuan, Zhang Longfei, Wei Kai, Gao Huaxing et al. (2024-04)
    Rheology-Control and Shrinkage-Mitigation of 3D Printed Geopolymer Concrete Using Nano-Cellulose and Magnesium-Oxide
  36. Ma Lei, Jia Zijian, Chen Yuning, Jiang Yifan et al. (2024-03)
    Water Loss and Shrinkage Prediction in 3D Printed Concrete with Varying w/b and Specimen Sizes
  37. Markin Slava, Mechtcherine Viktor (2023-10)
    The Effect of Layer Cross-Section on Plastic Shrinkage Cracking of 3D Printed Concrete Elements
  38. Zhang Hanghua, Hao Lucen, Zhang Shipeng, Xiao Jianzhuang et al. (2023-08)
    Advanced Measurement Techniques for Plastic Shrinkage and Cracking in 3D Printed Concrete Utilising Distributed Optical Fiber Sensor
  39. Zhu Lingli, Zhang Meng, Zhang Yaqi, Yao Jie et al. (2023-07)
    Research Progress on Shrinkage Properties of Extruded 3D Printed Cement-Based Materials
  40. Han Xiaoyu, Yan Jiachuan, Chen Tiefeng, Tang Boyang et al. (2023-07)
    Plastic Shrinkage of 3D Printed Concrete Under Different Self-Weight of Upper Layers
  41. Markin Slava, Mechtcherine Viktor (2023-03)
    Quantification of Plastic Shrinkage and Plastic Shrinkage Cracking of the 3D Printable Concretes Using 2D Digital Image Correlation
  42. Wang Li, Hu Yuanyuan, Wang Qiao, Cui Tianlong (2023-03)
    Shrinkage and Cracking Performance of PP/PVA Fiber-Reinforced 3D Printed Mortar
  43. Markin Slava, Mechtcherine Viktor (2023-01)
    Methods for Measuring Plastic Shrinkage and Related Cracking of 3D Printed Concrete
  44. Ma Lei, Zhang Qing, Lombois-Burger Hélène, Jia Zijian et al. (2022-09)
    Pore-Structure, Internal Relative Humidity, and Fiber-Orientation of 3D Printed Concrete with Polypropylene-Fiber and Their Relation with Shrinkage
  45. Wang Li, Li Qiqi, Hu Yuanyuan, Cui Tianlong et al. (2022-07)
    Shrinkage and Cracking Properties of Cellulose-Fiber-Concrete Composites for 3D Printing by Leveraging Internal Curing
  46. Tao Jie-Lin, Lin Can, Luo Qiling, Long Wujian et al. (2022-07)
    Leveraging Internal Curing Effect of Fly-Ash-Cenosphere for Alleviating Autogenous Shrinkage in 3D Printing
  47. Markin Slava, Mechtcherine Viktor (2022-06)
    Measuring Plastic Shrinkage and Related Cracking of 3D Printed Concretes
  48. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2022-06)
    Mitigating Early-Age Cracking in 3D Printed Concrete Using Fibers, Superabsorbent Polymers, Shrinkage Reducing Admixtures, B-CSA Cement and Curing Measures
  49. Zhang Hanghua, Xiao Jianzhuang, Duan Zhenhua, Zou Shuai et al. (2022-06)
    Effects of Printing Paths and Recycled Fines on Drying Shrinkage of 3D Printed Mortar
  50. Aslani Farhad, Dale Ryan, Hamidi Fatemeh, Valizadeh Afsaneh (2022-05)
    Mechanical and Shrinkage Performance of 3D Printed Rubberised Engineered Cementitious Composites
  51. Liu Xiongfei, Li Qi, Li Jixiang (2022-04)
    Shrinkage and Mechanical Properties Optimization of Spray-Based 3D Printed Concrete by PVA-Fiber
  52. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2022-04)
    A Plastic Shrinkage Cracking-Risk-Model for 3D Printed Concrete Exposed to Different Environments
  53. Rahul Attupurathu, Mohan Manu, Schutter Geert, Tittelboom Kim (2021-10)
    3D Printable Concrete with Natural and Recycled Coarse Aggregates:
    Rheological, Mechanical and Shrinkage Behavior
  54. Tran Mien, Cu Yen, Le Chau (2021-10)
    Rheology and Shrinkage of Concrete Using Polypropylene-Fiber for 3D Concrete Printing
  55. Shahmirzadi Mohsen, Gholampour Aliakbar, Kashani Alireza, Ngo Tuan (2021-09)
    Shrinkage Behavior of Cementitious 3D Printing Materials:
    Effect of Temperature and Relative Humidity
  56. Zhang Hanghua, Xiao Jianzhuang (2021-08)
    Plastic Shrinkage and Cracking of 3D Printed Mortar with Recycled Sand
  57. Putten Jolien, Snoeck Didier, Coensel R., Schutter Geert et al. (2020-12)
    Early-Age Shrinkage Phenomena of 3D Printed Cementitious Materials with Superabsorbent Polymers
  58. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2020-08)
    Plastic Shrinkage Cracking in 3D Printed Concrete
  59. Federowicz Karol, Kaszyńska Maria, Zieliński Adam, Hoffmann Marcin (2020-06)
    Effect of Curing Methods on Shrinkage Development in 3D Printed Concrete