Skip to content

#crack

Keywords by Co - Occurrence

  1. Cheng Zhangqi, Zhou Lu, Jia Xiangxi, Liu Renlong (2025-10)
    Experimental Study on Crack Development and Fracture Performance of 3D Printed Green Engineered Cementitious Composites
  2. Delavar Mohammad, Aslani Farhad, Sercombe Tim (2025-10)
    Cracking Behaviour in 3D Concrete Printed Fiber-Reinforced Cementitious Composites:
    A Review
  3. Mak Bunleang, Kim Tae, Dong Won-Jun, Shim Chang (2025-08)
    Crack Width Investigation of Reinforced Concrete Beam with 3D Concrete Printed Formwork Using Modified Parameters
  4. Motiani Ronak, Sylvain Saha, Dalal Sejal, Vora Jay et al. (2025-08)
    Innovative Reinforcement Techniques for 3D-Printed Concrete:
    The Impact of Shape Memory Alloys on Flexural Strength and Crack Mitigation
  5. Els Heinrich, Zijl Gideon, Villiers Wibke (2025-06)
    A Review of Shrinkage and Restrained Shrinkage Cracking in 3D Concrete Printing
  6. Skripkiūnas Gintautas, Tolegenova Aigerim, Rishko Lyudmyla, Akmalaiuly Kenzhebek et al. (2025-03)
    Durability and Cracking Defects in 3D-Printed Concrete
  7. Vargas Armando, Robayo-Salazar Rafael, Gutiérrez Ruby (2024-12)
    Effects of Incorporating Fine Aggregates and Polypropylene-Micro-Fibers on the Cracking-Control of 3D Printed Cementitious Mixtures
  8. Lori Ali, Mehrali Mehdi (2024-11)
    Mechanical Properties and Crack-Deflection Mechanisms in 3D Printed Porous Geopolymers with Cellular Structures
  9. You Dengyu, Kashani Alireza (2024-11)
    Effect of Environmental Conditions on Shrinkage-Induced Cracking of 3D Printed Mortar
  10. Subramaniam Kolluru, Paritala Spandana, Kulkarni Omkar, Thakur Manideep (2024-09)
    Fracture in 3D Printed Concrete Beams:
    Deflection and Penetration of Impinging Cracks at Layer Interfaces
  11. Bier Henriette, Hidding Arwin, Lewandowska J., Calabrese Giuseppe (2024-09)
    Developing a Computer-Vision Application for Crack Detection
  12. Markin Slava, Mechtcherine Viktor (2024-09)
    Mitigating Plastic Shrinkage and Cracking in 3D Printed Concrete Through Surface Rewetting
  13. Gonzales Betty, Zavaleta Diana, Bertolotti Bruno, Aguilar Rafael et al. (2024-07)
    Comprehensive Investigation into the Influence of Soil Composition and Water Content on Cracking Due to Drying Shrinkage in 3D Printed Earthen Structures
  14. Gerong Wangdui, Wang Pengfei, Liao Minmao, Chen Zhaohui et al. (2024-07)
    Interfacial Cracking at Layer and Filament Interfaces of 3D Printed Concrete:
    Experimental and Numerical Studies
  15. Chen Zhengyuan, Yang Shutong, Liu Qi, Xu Mingqi et al. (2024-03)
    Closed-Form Fracture-Model for Evaluating Crack-Resistance of 3D Printed Fiber-Reinforced Alkali-Activated Slag/Fly-Ash Recycled-Sand Concrete
  16. Ziada Mahmoud, Tanyildizi Harun, Seloglu Maksut, Coskun Ahmet (2024-02)
    Bacteria-Based Crack-Healing of 3D Printed PVA-Fiber-Reinforced Geopolymer Mortars
  17. Nguyen Vuong, Tran Jonathan, Liu Junli, Tran Mien et al. (2024-02)
    Extended Finite Element Multi-Scale Modelling for Crack Propagation in 3D Printed Fiber-Reinforced Concrete
  18. Markin Slava, Mechtcherine Viktor (2023-10)
    The Effect of Layer Cross-Section on Plastic Shrinkage Cracking of 3D Printed Concrete Elements
  19. Pi Yilin, Lu Cong, Li Baoshan, Zhou Junhui (2023-10)
    Crack Propagation and Failure Mechanism of 3D Printing Engineered Cementitious Composites (3DP-ECC) Under Bending Loads
  20. Lu Bing, Zhao Huanyu, Li Mingyang, Wong Teck et al. (2023-10)
    MgO/Fluid Catalytic Cracking Ash-Blends for 3D Printing on Vertical Surfaces
  21. Zhang Huan, Cao Shuai, Yilmaz Erol (2023-09)
    Polymer Shape Effect on Damage-Evolution, Internal Defects and Crack Propagation of 3D Printed Polymer-Based Cementitious Backfill
  22. Zhang Hanghua, Hao Lucen, Zhang Shipeng, Xiao Jianzhuang et al. (2023-08)
    Advanced Measurement Techniques for Plastic Shrinkage and Cracking in 3D Printed Concrete Utilising Distributed Optical Fiber Sensor
  23. Markin Slava, Mechtcherine Viktor (2023-03)
    Quantification of Plastic Shrinkage and Plastic Shrinkage Cracking of the 3D Printable Concretes Using 2D Digital Image Correlation
  24. Wang Li, Hu Yuanyuan, Wang Qiao, Cui Tianlong (2023-03)
    Shrinkage and Cracking Performance of PP/PVA Fiber-Reinforced 3D Printed Mortar
  25. Markin Slava, Mechtcherine Viktor (2023-01)
    Methods for Measuring Plastic Shrinkage and Related Cracking of 3D Printed Concrete
  26. Lu Bing, Li Hongliang, Li Mingyang, Wong Teck et al. (2022-11)
    Mechanism and Design of Fluid Catalytic Cracking Ash-Blended Cementitious Composites for High-Performance Printing
  27. Wang Li, Li Qiqi, Hu Yuanyuan, Cui Tianlong et al. (2022-07)
    Shrinkage and Cracking Properties of Cellulose-Fiber-Concrete Composites for 3D Printing by Leveraging Internal Curing
  28. Jipa Mihail-Andrei, Reiter Lex, Flatt Robert, Dillenburger Benjamin (2022-07)
    Environmental Stress Cracking of 3D Printed Polymers Exposed to Concrete
  29. Alanazi Nawaf, Kolawole John, Buswell Richard, Susmel Luca (2022-07)
    The Theory of Critical Distances to Perform the Static Assessment of 3D Printed Concrete Weakened by Manufacturing-Defects and Cracks
  30. Markin Slava, Mechtcherine Viktor (2022-06)
    Measuring Plastic Shrinkage and Related Cracking of 3D Printed Concretes
  31. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2022-06)
    Mitigating Early-Age Cracking in 3D Printed Concrete Using Fibers, Superabsorbent Polymers, Shrinkage Reducing Admixtures, B-CSA Cement and Curing Measures
  32. Chang Ze, Wan Zhi, Xu Yading, Schlangen Erik et al. (2022-06)
    Convolutional Neural Network for Predicting Crack-Pattern and Stress-Crack-Width Curve of Air-Void Structure in 3D Printed Concrete
  33. Alanazi Nawaf, Kolawole John, Buswell Richard, Susmel Luca (2022-05)
    The Theory of Critical Distances to Assess the Effect of Cracks & Manufacturing-Defects on the Static Strength of 3D Printed Concrete
  34. Ruffray Nicolas, Reiter Lex, Flatt Robert (2022-04)
    Overcoming Environmental Stress-Cracking of FDM 3D Printed Formwork for Counter-Pressure Casting of Concrete
  35. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2022-04)
    A Plastic Shrinkage Cracking-Risk-Model for 3D Printed Concrete Exposed to Different Environments
  36. Nair Sooraj, Li Anling, Mobasher Barzin, Neithalath Narayanan (2021-12)
    Effect of Layer-Height on Tensile Stress-Distribution and Crack-Width and Propagation in 3D Printed Fiber-Reinforced Flexural Elements
  37. Zhang Hanghua, Xiao Jianzhuang (2021-08)
    Plastic Shrinkage and Cracking of 3D Printed Mortar with Recycled Sand
  38. Rutzen Matthias, Lauff Philipp, Niedermeier Roland, Fischer Oliver et al. (2021-03)
    Influence of Fiber-Alignment on Pseudoductility and Micro-Cracking in a Cementitious Carbon-Fiber Composite Material
  39. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2020-08)
    Plastic Shrinkage Cracking in 3D Printed Concrete
  40. Rutzen Matthias, Volkmer Dirk, Weiss Ursula, Reischmann Lisa et al. (2019-09)
    Micro-Structural Analysis of Crack-Growth Caused by Static and Dynamic Loads in a Carbon-Fiber-Reinforced Cement-Paste