Skip to content

#sand

Keywords by Co - Occurrence

  1. Paul Suvash, Lee Junghyun, Tay Yi, Amr Issam et al. (2025-12)
    Developing Sustainable 3D Printable Concrete Materials Using Olivine Sand for Carbon Sequestration
  2. Liang Xiangzhou, Li Jinqian, Li Ziwei, Wang Qiang (2025-12)
    Experimental and Analytical Investigation of the Shear Behavior of the Developed BFRP Reinforced 3D Printed Composite Beams with U-Shaped Seawater Sea-Sand ECC Formwork
  3. Ding Tao, Wei Jun, Sun Jingting, Feng Kaikai (2025-12)
    Experimental Study on Thermal Properties of 3D Printed Concrete with Recycled Sand and Powder
  4. Khoury Eliane, Cheikh Khadija, Schutter Geert, Cazacliu Bogdan et al. (2025-11)
    Using Vacuum Mixing for 3D Printing of Mortars Made with Recycled Sand
  5. Raza Ali, Tan Binglin, Jiajia Zhou, Umar Muhammad et al. (2025-11)
    Evaluation of Mechanical and Microstructural Properties of Sustainable 3D-Printed Engineered Cementitious Composites Incorporating Hybrid PE/PVA Fibers and Yellow River Sand
  6. Raza Ali, Yuan Chengfang (2025-10)
    Degradation Mechanisms and Microstructural Performance of 3D-Printed Engineered Cementitious Composites with Yellow River Sand Under Chloride Ion Wet-Dry Cycles
  7. Luo Surong, Jin Wenhao, Zhang Zhaorui, Zhang Kaijian (2025-09)
    Constitutive Relationship of 3D Printed Fiber Reinforced Recycled Sand Concrete Under Uniaxial Compression
  8. Dong Wei, Zhang Changmin, Wang Junfeng, Zhang Xinjie et al. (2025-07)
    Optimal Design of Mix Proportions for 3D Printed Concrete with Ferrochrome Slag and Aeolian Sand
  9. Gomez Jaramillo Laura, Luković Mladena, Šavija Branko, Zhou Wen (2025-06)
    Recycled Sand for 3D-Printed Strain Hardening Cementitious Composite:
    A Review of Recent Developments
  10. Raza Ali, Junjie Zhang, Fan Jiahui, Umar Muhammad et al. (2025-05)
    Comprehensive Study on the Microstructural and Mechanical Performance of 3D-Printed Engineered Cementitious Composites with Yellow River Sand Integration
  11. Zhu Wenxuan, Liu Chao, Zhang Yu, Zhang Yunsheng et al. (2025-05)
    Rheological Performance Regulation and Material Optimization of Manufactured Sand Concrete in 3D Printing
  12. Thib Raghed, Taleb Maria, Belayachi Naima, Bulteel David et al. (2025-05)
    Hardened Properties of 3D Printable Mortars with Full Replacement of Natural Sand by Recycled Sand
  13. Ravichandran Darssni, Prem Prabhat, Giridhar Greeshma, Bhaskara Gollapalli et al. (2025-04)
    Time-Dependent Properties of 3D-Printed UHPC with Silica Sand, Copper Slag, and Fibers
  14. Tran Mien, Le Thanh, Cao Nguyen, Nguyen Thi (2025-03)
    Sustainable Prospect for Entire Replacement of River Sand with Recycled Glass Aggregate in 3D Printing Concrete:
    Rheological Properties, Printability, and Alkali-Silica Reaction
  15. Liu Chao, Li Xin, Wu Yiwen, Liu Huawei et al. (2025-03)
    Impact of External Loading on the Time-Dependent Evolution of 3D Printed Concrete with Recycled Sand in the Green State
  16. Mansouri Abraham, Wolde Japi, Joda Akram (2025-03)
    The Potential of Sand as a Sustainable Infill for 3D Concrete Printed Building Walls
  17. Kuang Weifeng, Pavlenko Petro, Guo Haoyu, Tian Kuo et al. (2025-03)
    Utilization of Machine-Made Sand Waste in 3D-Printed Ecological Concrete for Artificial Reefs
  18. Vlieger Jentel, Blaakmeer Jan, Gruyaert Elke, Cizer Özlem (2025-01)
    Assessing Static and Dynamic Yield-Stress of 3D Printing Mortar with Recycled Sand:
    Influence of Sand-Geometry, Fineness Modulus, and Water-to-Binder Ratio
  19. Brunner Kim, Stengel Thorsten, Kustermann Andrea (2025-01)
    3D Particle-Bed Printing Using Different Cementitious Binders and Recycled Sand
  20. Luo Surong, Li Wenqiang, Cai Yili, Zhang Kaijian (2024-12)
    Effects of Carbonated Recycled Sand on the Interfacial Bonding Performance of 3D Printed Cement-Based Material
  21. Ali Mohd, Rub Rashid, Banat Fawzi, Kim Tae-Yeon (2024-11)
    Enhancing the Printing Quality and Mechanical Properties of 3D Printed Cement Composites with Date-Syrup-Based Graphene-Coated-Sand Hybrid
  22. Vlieger Jentel, Cizer Özlem, Lesage Karel, Desplentere Frederik et al. (2024-11)
    Rheological- and Pumpability-Analysis of Sustainable 3D Printing Mortars Incorporating Recycled Sand
  23. Lan Tian, Yang Shutong, Xu Mingqi, Chen Zhengyuan et al. (2024-10)
    Quantitative Assessment of Interfacial-Fracture-Properties in 3D Printed Alkali-Activated Recycled Sand Concrete Based on a Closed-Form Fracture-Model
  24. Cook Kieron, Çapunaman Özgüç, Gürsoy Benay (2024-09)
    Robotic Sand Shaping for Reusable Formworks:
    From Tool-Path Design to Emergent Shapes and Patterns in Cast Form
  25. Haghighat Negin, Mollah Md., Sannerud Stian, Boyer Julie et al. (2024-09)
    Rheology and Printability of Cement-Paste Modified with Filler from Manufactured Sand
  26. Wu Yiwen, Liu Chao, Liu Huawei, Bai Guoliang et al. (2024-07)
    Mechanism of the Influence of Multi-Scale Pore-Structure on the Triaxial Mechanical Properties of 3D Printed Concrete with Recycled Sand
  27. Bai Meiyan, Xiao Jianzhuang, Shen Jianyu, Ding Tao et al. (2024-07)
    Printability and Mechanical Anisotropy of 3D Printed Concrete with Manufactured Sand Derived from Basalt
  28. Rückrich Stefanie, Agranati Galit, Grobman Yasha (2024-05)
    Evaluating Clay Characteristics for Printable Geo-Materials:
    A Case Study of Clay-Sand Mixes
  29. Wu Yiwen, Liu Chao, Bai Guoliang, Liu Huawei et al. (2024-05)
    Effect of Time Interval on the Inter-Layer Adhesion of 3D Printed Concrete with Recycled Sand:
    Multi-Factor Influencing Mechanisms and Superabsorbent Polymer Enhancement
  30. Sun Jiapan, Fan Bingbing, Li Bin, Zhang Yimeng (2024-04)
    A Study of Viability and Characteristic of 3D Printable Mortar with Yellow River Sand
  31. Shahid Mursaleen, Sglavo Vincenzo (2024-03)
    Binder-Jetting 3D Printing of Binary Cement-Siliceous Sand Mixture
  32. Escobar-Valencia Esteban, Capet J., Brière J., Ferngau E. (2024-03)
    Hydraulic and Geotechnical Assessments of a Large 3D Printed Artificial Reef in Sands
  33. Labuda Igor, Pugliese Federica, Dzwierzynska Jolanata (2024-03)
    An Innovative Concept for 3D Sand-Printed Sustainable Refugee Shelters in a Sandy Desert in a Hot and Dry Climate
  34. Chen Zhengyuan, Yang Shutong, Liu Qi, Xu Mingqi et al. (2024-03)
    Closed-Form Fracture-Model for Evaluating Crack-Resistance of 3D Printed Fiber-Reinforced Alkali-Activated Slag/Fly-Ash Recycled-Sand Concrete
  35. Kaliyavaradhan Senthil, Ambily Parukutty, Shekar Deepadharshan, Sebastian Shilpa (2024-02)
    Effect of Sand-Gradations on the Fresh Properties of 3D Printable Concrete
  36. Nan Cristina, Vigorito Alessio (2024-02)
    Exploring 3D Concrete Printing of Lattice Structures on Robotically-Shaped Sand Formwork for Circular Futures
  37. Giudice Lorenzo, Katsamakas Antonios, Liu Bowen, Sarhosis Vasilis et al. (2024-02)
    Physical Modelling of Unreinforced Masonry Walls Using a Sand-Based 3D Printer
  38. Dong Wei, Wang Junfeng, Hang Meiyan, Qu Shuqiang (2024-01)
    Research on Printing Parameters and Salt-Frost-Resistance of 3D Printing Concrete with Ferrochrome-Slag and Aeolian Sand
  39. Wang Qinghua, Xu Jinggang, Feng Duo, Li Wei et al. (2024-01)
    Properties and Printability Evaluation of Three-Dimensional Printing Magnesium-Oxychloride Cement by Fully Utilizing Aeolian-Sand
  40. Azimi Zahir, Mousavi Moein, Bengar Habib, Javadi Akbar (2023-12)
    Study on the Post-Fire Mechanical Properties of Lightweight 3D Printed Concrete Containing Expanded Perlite as Partial Replacement of Natural Sand
  41. Zhu Wenxuan, Zhu Shidong, Li Wangxin, Zhang Yu et al. (2023-11)
    A Study on the Printability of Manufactured Sand Concrete
  42. Thib Raghed, Belayachi Naima, Bouarroudj Mohamed, Bulteel David et al. (2023-10)
    A Methodology for Designing 3D Printable Mortar Based on Recycled Sand
  43. Conrad John, Spencer Lawson, Amador Robert, Linnehan Tyler et al. (2023-09)
    Concrete Printed Gyroid Column:
    A Structurally Optimized, Sand Layer Supported Printing Method
  44. Wang Hao, Jiang Minghui, Hang Meiyan, Zhou Gangming et al. (2023-07)
    Research on the Mechanical Properties and Frost-Resistance of Aeolian Sand 3D Printed Mortar
  45. Çapunaman Özgüç, Iseman Emily, Gürsoy Benay (2023-07)
    Material in the Loop Fabrication:
    A Vision-Based Adaptive Clay 3D Printing Workflow on Indeterminate Sand Surfaces
  46. Wang Fei, Hua Sudong, Chen Tingzhu, He Bijuan et al. (2023-07)
    Effect of Nano-Clay and PCE on the Buildability of Ultra-Fine Dredged Sand-Based 3D Printing Materials
  47. Bai Meiyan, Wu Yuching, Xiao Jianzhuang, Ding Tao et al. (2023-04)
    Workability and Hardened Properties of 3D Printed Engineered Cementitious Composites Incorporating Recycled Sand and PE-Fibers
  48. Wu Yiwen, Liu Chao, Bai Guoliang, Liu Huawei et al. (2023-03)
    3D Printed Concrete with Recycled Sand:
    Pore-Structure and Triaxial Compression Properties
  49. Liu Chao, Wang Zhihui, Wu Yiwen, Liu Huawei et al. (2023-02)
    3D Printing Concrete with Recycled Sand:
    The Influence Mechanism of Extruded Pore-Defects on Constitutive Relationship
  50. Diniz Hugo, Martinelli Antônio, Cabral Kleber, Ferreira Ruan et al. (2023-01)
    Synergistic Effects of the Use of Metakaolin, Sand and Water on the Properties of Cementitious Composites for 3D Printing
  51. Liu Chao, Chen Yuning, Zhang Zedi, Niu Geng et al. (2022-10)
    Study of the Influence of Sand on Rheological Properties, Bubble Features and Buildability of Fresh Foamed Concrete for 3D Printing
  52. Wang Li, Xiao Wei, Wang Qiao, Jiang Hailong et al. (2022-07)
    Freeze-Thaw-Resistance of 3D Printed Composites with Desert Sand
  53. Tao Yaxin, Ren Qiang, Lesage Karel, Tittelboom Kim et al. (2022-07)
    Shape Stability of 3D Printable Concrete with River and Manufactured Sand Characterized by Squeeze Flow
  54. Kovaleva Daria, Nistler Maximilian, Verl Alexander, Blandini Lucio et al. (2022-06)
    Zero-Waste Production of Lightweight Concrete Structures with Water-Soluble Sand Formwork
  55. Lee Jin, Kim Jae (2022-05)
    Matric-Suction of Fine Sand and Its Effect on the Shape Stability of 3D Printed Cement Mortar
  56. Kovaleva Daria, Nistler Maximilian, Blandini Lucio, Sobek Werner et al. (2022-04)
    Recyclable Sand Formwork:
    Towards Circular Production of Lightweight Concrete Structures
  57. Zhang Hanghua, Xiao Jianzhuang (2021-08)
    Plastic Shrinkage and Cracking of 3D Printed Mortar with Recycled Sand
  58. Xiao Jianzhuang, Han Nv, Zhang Lihai, Zou Shuai (2021-05)
    Mechanical and Microstructural Evolution of 3D Printed Concrete with Polyethylene-Fiber and Recycled Sand at Elevated Temperatures
  59. Ding Tao, Xiao Jianzhuang, Zou Shuai, Yu Jiangtao (2021-03)
    Flexural Properties of 3D Printed Fiber-Reinforced Concrete with Recycled Sand
  60. Li Leo, Xiao Bofeng, Fang Z., Xiong Z. et al. (2020-11)
    Feasibility of Glass-Basalt Fiber-Reinforced Seawater Coral Sand Mortar for 3D Printing
  61. Qin Hao, Zhang Xiwen (2020-10)
    Improvements on the Design of Sand-Structure Additive Manufacturing
  62. Nething Christoph, Smirnova Maya, Gröning Janosch, Haase Walter et al. (2020-08)
    A Method for 3D Printing Bio-Cemented Spatial Structures Using Sand and Urease-Active-Calcium-Carbonate-Powder
  63. Battaglia Christopher, Miller Martin, Verian Kho (2020-07)
    Print-Cast Concrete:
    Additive Manufacturing for 3D Printing Mortar in Robotically Fabricated Green Sand Molds
  64. Hassan Hilal, Najjar Fady, Jassmi Hamad, Ahmed Waleed (2020-07)
    Fresh and Hardened Properties of 3D Printed Concrete Made with Dune Sand
  65. Ding Tao, Xiao Jianzhuang, Zou Shuai, Wang Yu (2020-06)
    Hardened Properties of Layered 3D Printed Concrete with Recycled Sand
  66. Ding Tao, Xiao Jianzhuang, Qin Fei, Duan Zhenhua (2020-03)
    Mechanical Behavior of 3D Printed Mortar with Recycled Sand at Early-Ages
  67. Hu Chang’an, Du Wenbo (2018-08)
    Research on the Method for Improving Mechanical Properties of Sand-Mold-Based on 3D Printing Process
  68. Rippmann Matthias, Liew A., Mele Tom, Block Philippe (2018-03)
    Design, Fabrication and Testing of Discrete 3D Sand-Printed Floor Prototypes
  69. Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2018-01)
    Penetration of Cement-Pastes into Sand-Packings During 3D Printing:
    Analytical and Experimental Study