Skip to content

#paste

Keywords by Co - Occurrence

  1. Teixeira João, Jesus Manuel, Rangel Bárbara, Alves Jorge et al. (2026-01)
    Evaluation of Printing Performance of Cementitious Pastes with Alternative Powders
  2. Jamifar Vahid, Eskandari‐Naddaf Hamid, Dehestani Mehdi (2025-10)
    Optimizing Electric Arc Furnace Dust Utilization in 3D Printed Reinforced Cement Paste Using D‐Optimal Design of Experiments and Gray Wolf Optimization
  3. Li Leo, Fei Zuojie, Jiao Chujie, Luo Tao et al. (2025-09)
    Bauxite Residue-Based 3D Printing Mortar:
    Enhancing Performance and Sustainability Through the Paste Replacement Approach
  4. Safanelli Nicollas, Schackow Adilson, Effting Carmeane, Matos Paulo (2025-09)
    The Effect of Crystalline Nanocellulose on the Rheology, Hydration of Cement Pastes, and Buildability of 3D-Printed Concrete
  5. Dietrich Sebastian, Schneider Philip, Richter Christiane, Najian Asl Reza et al. (2025-08)
    Multi-Fidelity Structural Design for 3D Concrete Printing with Selective Paste Intrusion
  6. Vico Lujano Raúl, Pérez Villarejo Luis, Novais Rui, Hidalgo-Torrano Pilar et al. (2025-07)
    Optimized Mortar Formulations for 3D Printing:
    A Rheological Study of Cementitious Pastes Incorporating Potassium-Rich Biomass Fly Ash Wastes
  7. Shi Ye, You Ge, Wu Pengtao, Liu Zhongxian et al. (2025-07)
    Effect of Water Film and Paste Film Thicknesses on Printability of 3D Printed Low Cement UHPC
  8. Zhang Tianjie, Wang Donglei, Lu Yang (2025-01)
    A Navier-Stokes-Informed Neural Network for Simulating the Flow-Behavior of Flowable Cement-Paste in 3D Concrete Printing
  9. Márquez Álvaro, Varela Hugo, Barluenga Gonzalo (2024-12)
    Rheology and Early-Age Evaluation of 3D Printable Cement-Limestone-Filler-Pastes with Nano-Clays and Methylcellulose
  10. Sun Zhaoyang, Zhao Yuyang, Hou Dongshuai, Li Zongjin et al. (2024-11)
    Rheology-Control of Cement-Paste by In-Situ Polymerization for 3D Printing Applications
  11. Ji Yianliang, Pott Ursula, Mezhov Alexander, Rößler Christiane et al. (2024-11)
    Modelling and Experimental Study on Static Yield-Stress-Evolution and Structural Build-Up of Cement-Paste in Early-Stage of Cement Hydration
  12. Straßer Alexander, Haynack Alexander, Kränkel Thomas, Gehlen Christoph (2024-09)
    Additive Manufacturing by the Selective Paste-Intrusion:
    Effect of the Distance of the Print Nozzle to the Particle-Bed on the Print Quality
  13. He Lewei, Pan Jiahui, Hee Yu, Chen Hao et al. (2024-09)
    Development of Novel Concave and Convex Trowels for Higher Inter-Layer Strength of 3D Printed Cement-Paste
  14. Krakovská Ema, Briels David, Straßer Alexander, Kränkel Thomas et al. (2024-09)
    Functionally Hybridised Lightweight Concrete Components:
    Monolithic Building Construction Using Selective Paste-Intrusion
  15. Hanžič Lucija, Šter Katarina, Štefančič Mateja (2024-09)
    Implementing the Excess-Paste-Concept for a Systematic Mix-Design of Printable Concrete
  16. Haghighat Negin, Mollah Md., Sannerud Stian, Boyer Julie et al. (2024-09)
    Rheology and Printability of Cement-Paste Modified with Filler from Manufactured Sand
  17. Tomolt Laura, Meggers Forrest, Moini Mohamadreza (2024-09)
    3D Printing Channel Networks with Cement-Paste
  18. Kamakshi Tippabhotla, Thakur Manideep, Subramaniam Kolluru (2024-07)
    Formulating Printable Concrete Mixtures Based on Paste-Rheology and Aggregate-Content:
    Application to Alkali-Activated Binders
  19. Zhang Yiyuan, Lesage Karel, Zhang Yi, Tao Yaxin et al. (2024-07)
    Effect of Magnetic Intervention-Time on the Buildability of Printable Cement and Limestone-Pastes Containing Fe3O4-Particles
  20. Wang Xiangyu, Krishnan Padmaja, Celik Kemal (2024-04)
    Enhancing Carbonation and Thermal Insulation of Reactive Magnesium Oxide Cement (RMC)-Based 3D Printable Pastes with Cenospheres
  21. Niu Geng, Liu Chao, Jia Lutao, Ma Lei et al. (2024-03)
    Preparation and Performance-Analysis of 3D Printed Lightweight EPS-Concrete:
    Insights from the Excess-Paste-Theory
  22. Jia Lutao, Jia Zijian, Zhang Zedi, Tang Zhenzhong et al. (2024-02)
    Effect of Recycled Brick-Powder with Various Particle-Features on Early-Age Hydration, Water-State, and Rheological Properties of Blended Cement-Paste in the Context of 3D Printing
  23. Straßer Alexander, Kränkel Thomas, Gehlen Christoph (2023-12)
    Integrating Wire Arc Additive Manufacturing into Selective Paste-Intrusion for Reinforced Concrete Elements:
    Effect of Temperature on the Mechanical Performance
  24. Nóbrega Thiers, Henriques Gonçalo, Passaro Andres (2023-12)
    3D Printing for Architecture:
    Organic Integration of Algorithm, Machine and Material-Paste-Manufacture
  25. Straßer Alexander, Riegger Felix, Hamilton Leigh, Kränkel Thomas et al. (2023-09)
    Selective Paste-Intrusion:
    Integration of Reinforcement by WAAM
  26. Jia Zijian, Zhang Zedi, Jia Lutao, Cao Ruilin et al. (2023-09)
    Effect of Different Expansive Agents on the Early-Age Structural Build-Up Process of Cement-Paste
  27. Yang Huashan, Che Yujun, Luo Jie (2023-08)
    Calcium Leaching of 3D Printed Cement-Paste Exposed to Ammonium Chloride Solutions
  28. Varela Hugo, Barluenga Gonzalo, Perrot Arnaud (2023-07)
    Extrusion and Structural Build-Up of 3D Printing Cement-Pastes with Fly-Ash, Nano-Clay and VMAs
  29. Ghantous Rita, Evseeva Anastasiia, Dickey Brandon, Gupta Shashank et al. (2023-07)
    Examining Effect of Printing-Directionality on Freezing-and-Thawing Response of Three-Dimensional-Printed Cement-Paste
  30. Chen Yu, Zhang Yu, He Shan, Liang Xuhui et al. (2023-06)
    Improving Structural Build-Up of Limestone-Calcined-Clay-Cement-Pastes by Using Inorganic Additives
  31. Salam Mohammad Abdul, Biernacki Joseph (2023-04)
    2D Stationary Computational Printing of Cement-Based Pastes with Time-Dependent Rheology
  32. Ravichandran Darssni, Giridhar Greeshma, Ramamurthy Vignesh, Prem Prabhat (2023-03)
    Influence of Test-Protocol on Determining the Rheological Properties of Cement-Pastes-Mixtures for Concrete 3D Printing
  33. Xu Zhuoyue, Zhang Dawang, Li Hui, Sun Xuemei (2023-02)
    Effects of the Distribution of Solid Particles on the Rheological Properties and Buildability of 3DPM Fresh Pastes with Different FA/GGBFS Content
  34. Kosson Michael, Brown Lesa, Sanchez Florence (2023-01)
    Nano-Mechanical Characterization of 3D Printed Cement-Pastes
  35. Kondepudi Kala, Subramaniam Kolluru, Nematollahi Behzad, Bong Shin et al. (2022-11)
    Study of Particle-Packing and Paste-Rheology in Alkali-Activated Mixtures to Meet the Rheology Demands of 3D Concrete Printing:
    Correction
  36. Che Yujun, Yang Huashan (2022-10)
    Hydration Products, Pore-Structure, and Compressive Strength of Extrusion-Based 3D Printed Cement-Pastes Containing Nano-Calcium-Carbonate
  37. Riegger Felix, Zäh Michael (2022-08)
    Additive Manufacturing of Steel-Reinforcements:
    Integration of WAAM Reinforcements in Particle-Bed 3D Printing with Selective Cement-Paste-Intrusion
  38. Wang Zhibin, Jia Lutao, Deng Zhicong, Zhang Chao et al. (2022-08)
    Bond Behavior Between Steel-Bars and 3D Printed Concrete:
    Effect of Concrete Rheological Property, Steel-Bar Diameter and Paste-Coating
  39. Ghantous Rita, Valadez-Carranza Yvette, Reese Steven, Weiss William (2022-06)
    Impact of Drying of 3D Printed Cementitious Pastes on Their Degree of Hydration
  40. Straßer Alexander, Matthäus Carla, Weger Daniel, Kränkel Thomas et al. (2022-06)
    Selective Paste-Intrusion:
    Stability of Cement-Paste Mixtures Towards Changing Ambient Temperature
  41. Ghantous Rita, Valadez-Carranza Yvette, Reese Steven, Weiss William (2022-06)
    Drying Behavior of 3D Printed Cementitious Pastes Containing Cellulose-Nano-Crystals
  42. Mohammad Abdul, Biernacki Joseph (2022-06)
    2D Stationary Computational Printing of Cement-Based Pastes
  43. Kondepudi Kala, Subramaniam Kolluru, Nematollahi Behzad, Bong Shin et al. (2022-05)
    Study of Particle-Packing and Paste-Rheology in Alkali-Activated Mixtures to Meet the Rheology Demands of 3D Concrete Printing
  44. Moini Mohamadreza, Olek Jan, Zavattieri Pablo, Youngblood Jeffrey (2022-04)
    Early-Age Buildability-Rheological Properties Relationship in Additively Manufactured Cement-Paste Hollow Cylinders
  45. Zhang Chao, Deng Zhicong, Chen Chun, Zhang Yamei et al. (2022-03)
    Predicting the Static Yield-Stress of 3D Printable Concrete Based on Flowability of Paste and Thickness of Excess-Paste-Layer
  46. Xiao Qiyuan, Long Guangcheng, Feng Ruiping, Zeng Xiaohui et al. (2021-12)
    Effect of Alternating Current Field on Rheology of Fresh Cement-Based-Pastes
  47. He Lewei, Tan Jolyn, Chow Wai, Li Hua et al. (2021-11)
    Design of Novel Nozzles for Higher Inter-Layer Strength of 3D Printed Cement-Paste
  48. Straßer Alexander, Weger Daniel, Matthäus Carla, Kränkel Thomas et al. (2021-11)
    Combining Wire and Arc Additive Manufacturing and Selective Paste-Intrusion for Additively Manufactured Structural Concrete
  49. Nair Sooraj, Neithalath Narayanan (2021-11)
    Flow Characterization of Three-Dimensional Printable Cementitious Pastes During Extrusion Using Capillary-Rheometry
  50. Schryver Robin, Cheikh Khadija, Lesage Karel, Yardimci Mert et al. (2021-09)
    Numerical Reliability Study Based on Rheological Input for Bingham-Paste-Pumping Using a Finite Volume Approach in OpenFOAM
  51. Lv Xuesen, Qin Yao, Liang Hang, Cui Xuemin (2021-07)
    Effects of Modifying-Agent on Rheology and Workability of Alkali-Activated Slag-Paste for 3D Extrusion-Forming
  52. Moini Mohamadreza, Baghaie Ahmadreza, Rodriguez Fabian, Zavattieri Pablo et al. (2021-06)
    Quantitative Microstructural Investigation of 3D Printed and Cast Cement-Pastes Using Micro-Computed Tomography- and Image-Analysis
  53. Marchment Taylor, Sanjayan Jay (2021-04)
    Reinforcement Method for 3D Concrete Printing Using Paste-Coated Bar Penetrations
  54. Weger Daniel, Gehlen Christoph (2021-01)
    Particle-Bed Binding by Selective Paste-Intrusion:
    Strength and Durability of Printed Fine-Grain Concrete Members
  55. Wu Weiwei, Wang Zhongyu, Ding Shuang, Song Aiping (2021-01)
    Effect Research of Cement Block on Paste-Flow for 3D Cement Printing Based on an Improved Lattice-Boltzmann Method
  56. Weger Daniel, Pierre Alexandre, Perrot Arnaud, Kränkel Thomas et al. (2021-01)
    Penetration of Cement-Pastes into Particle-Beds:
    A Comparison of Penetration Models
  57. Jones Scott (2020-11)
    Fused Filament-Fabrication Printer Modified to Dispense Cement-Paste for Concrete Additive Manufacturing Studies
  58. Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2020-11)
    Additive Manufacturing of Cementitious Materials by Selective Paste-Intrusion:
    Numerical Modeling of the Flow Using a 2D-Axisymmetric Phase-Field-Method
  59. Zhang Yi, Jiang Zhengwu, Zhu Yanmei, Zhang Jie et al. (2020-10)
    Effects of Redispersible Polymer-Powders on the Structural Build-Up of 3D Printing Cement Paste with and without Hydroxypropyl-Methylcellulose
  60. Yu Shiwei, Du Hongjian, Sanjayan Jay (2020-07)
    Aggregate-Bed 3D Concrete Printing with Cement-Paste Binder
  61. Weger Daniel, Baier Daniel, Straßer Alexander, Prottung Sophia et al. (2020-07)
    Reinforced Particle-Bed Printing by Combination of the Selective Paste-Intrusion Method with Wire and Arc Additive Manufacturing:
    A First Feasibility Study
  62. Zongo Karim, Charrier Malo, Duval Corentin, Ouellet-Plamondon Claudiane (2020-07)
    Dynamic and Static Yield-Stress Determination of Cementitious Paste with Admixtures
  63. Varela Hugo, Barluenga Gonzalo, Palomar Irene (2020-07)
    Rheology Evaluation of Cement-Paste with Nano-Clay , Nano-Silica and Polymeric Admixtures for Digital Fabrication
  64. Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2020-07)
    2D Numerical Modelling of Particle-Bed 3D Printing by Selective Paste-Intrusion
  65. He Lewei, Chow Wai, Li Hua (2020-06)
    Effects of Inter-Layer Notch and Shear Stress on Inter-Layer Strength of 3D Printed Cement-Paste
  66. Vergara Luis, Colorado Henry (2020-03)
    Additive Manufacturing of Portland Cement-Pastes with Additions of Kaolin, Superplastificant and Calcium-Carbonate
  67. Vergara Luis, Colorado Henry (2020-02)
    Portland 3D Printing of Portland-Cement-Pastes with Additions of Kaolin, Superplastificant, and Calcium-Carbonate
  68. Chen Mingxu, Li Laibo, Wang Jiaao, Huang Yongbo et al. (2019-10)
    Rheological Parameters and Building Time of 3D Printing Sulphoaluminate-Cement-Paste Modified by Retarder and Diatomite
  69. Rutzen Matthias, Volkmer Dirk, Weiss Ursula, Reischmann Lisa et al. (2019-09)
    Micro-Structural Analysis of Crack-Growth Caused by Static and Dynamic Loads in a Carbon-Fiber-Reinforced Cement-Paste
  70. Zhang Chao, Hou Zeyu, Chen Chun, Zhang Yamei et al. (2019-09)
    Design of 3D Printable Concrete Based on the Relationship Between Flowability of Cement-Paste and Optimum Aggregate-Content
  71. Peng Yiming, Ma Kunlin, Long Guangcheng, Xie Youjun (2019-08)
    Influence of Nano-SiO2, Nano-CaCO3 and Nano-Al2O3 on Rheological Properties of Cement-Fly-Ash-Paste
  72. Weng Yiwei, Ruan Shaoqin, Li Mingyang, Mo Liwu et al. (2019-06)
    Feasibility Study on Sustainable-Magnesium-Potassium-Phosphate Cement-Paste for 3D Printing
  73. Mendoza Reales Oscar, Duda Pedro, Silva Emílio, Paiva Maria et al. (2019-06)
    Nanosilica-Particles as Structural Buildup Agents for 3D Printing with Portland Cement-Pastes
  74. Hambach Manuel, Rutzen Matthias, Volkmer Dirk (2019-02)
    Properties of 3D-Printed Fiber-Reinforced Portland Cement-Paste
  75. Nair Sooraj, Alghamdi Hussam, Arora Aashay, Mehdipour Iman et al. (2019-01)
    Linking Fresh Paste Microstructure, Rheology and Extrusion-Characteristics of Cementitious Binders for 3D Printing
  76. Huang Hai, Huang Tingjie, Yuan Qiang, Zhou Dajun et al. (2019-01)
    Temperature-Dependence of Structural Build-Up and Its Relation with Hydration Kinetics of Cement-Paste
  77. Chen Mingxu, Guo Xiangyang, Zheng Yan, Li Laibo et al. (2018-11)
    Effect of Tartaric Acid on the Printable, Rheological and Mechanical Properties of 3D Printing Sulphoaluminate Cement-Paste
  78. Nerella Venkatesh, Beigh Mirza, Fataei Shirin, Mechtcherine Viktor (2018-11)
    Strain-Based Approach for Measuring Structural Build-Up of Cement-Pastes in the Context of Digital Construction
  79. Jones Scott, Bentz Dale, Martys Nicos, George William et al. (2018-09)
    Rheological Control of 3D Printable Cement-Paste and Mortars
  80. Ma Siwei, Kawashima Shiho (2018-09)
    Rheological and Water Transport Properties of Cement-Pastes Modified with Diutan Gum and Attapulgite-Palygorskite-Nano-Clay for 3D Concrete Printing
  81. Qian Ye, Schutter Geert (2018-06)
    Enhancing Thixotropy of Fresh Cement-Pastes with Nano-Clay in Presence of Polycarboxylate-Ether Superplasticizer (PCE)
  82. Qian Ye, Schutter Geert (2018-04)
    Different Effects of NSF and PCE Superplasticizer on Adsorption, Dynamic Yield-Stress and Thixotropy of Cement-Pastes
  83. Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2018-01)
    Penetration of Cement-Pastes into Sand-Packings During 3D Printing:
    Analytical and Experimental Study
  84. Yuan Qiang, Zhou Dajun, Li Baiyun, Huang Hai et al. (2017-11)
    Effect of Mineral Admixtures on the Structural Build-Up of Cement-Paste
  85. Hambach Manuel, Volkmer Dirk (2017-02)
    Properties of 3D Printed Fiber-Reinforced Portland-Cement-Paste
  86. Qian Ye, Kawashima Shiho (2016-09)
    Use of Creep Recovery Protocol to Measure Static Yield-Stress and Structural Rebuilding of Fresh Cement-Pastes
  87. Hambach Manuel, Möller Hendrik, Neumann Thomas, Volkmer Dirk (2016-08)
    Portland-Cement-Paste with Aligned Carbon-Fibers Exhibiting Exceptionally High Flexural Strength (>100 MPa)
  88. Choi Myoungsung, Park Kyoungsoo, Oh Taekeun (2016-06)
    Viscoelastic Properties of Fresh Cement-Paste to Study the Flow Behavior
  89. Bessaies-Bey Hela, Baumann Robert, Schmitz Marc, Radler Michael et al. (2015-05)
    Effect of Polyacrylamide on Rheology of Fresh Cement-Pastes
  90. Zhou Xiangming, Li Zongjin, Fan Mizi, Chen Huapeng (2013-01)
    Rheology of Semi-Solid Fresh Cement-Pastes and Mortars in Orifice-Extrusion
  91. Deng Shou-chang, Zhang Xue-bing, Qin Ying-hui, Luo Guan-xiang (2007-02)
    Rheological Characteristic of Cement Clean Paste and Flowing Behavior of Fresh Mixing Concrete with Pumping in Pipeline