Skip to content

#flow

Keywords by Co - Occurrence

  1. Tushar Fazlul, Hasan Mehedi, Hasan Kamrul, Mawa Jannatul et al. (2026-01)
    Factors Affecting Flowability and Rheological Behavior of 3D Printed Concrete:
    A Comprehensive Review
  2. Tao Jie-Lin, Hu Shengming, Duan Zhenhua, Jiao Dengwu (2025-11)
    Magneto-Responsive Flow Behavior and Early-Age Microstructural Evolution of 3D Printing Lightweight Concrete with Fly Ash Cenospheres
  3. Yu Hao, Zhang Weiwei, Liew Jia, Yin Binbin et al. (2025-11)
    Simulating Material Flow and Extrusion Dynamics in 3D Concrete Printing
  4. Zhou Jiehang, Du Longyu, Wu Kai, Lai Jianzhong et al. (2025-11)
    Effective Factors and a Prediction Method on Extrusion Flow of 3D Printed Concrete
  5. Wang Hailong, Song Xinlei, Shen Wenbin, Sun Xiaoyan et al. (2025-10)
    Evaluation and Optimization of 3D-Printed Concrete Based on Flowability Considering Printability and Micro-Pore Characteristics
  6. Niu Huaxian, Yu Bo, Hao Ji (2025-10)
    CFD-Based Flow Field Analysis of Spiral Nozzles in 3D Concrete Printing
  7. Han Seongho, Addai-NImoh Alfred, Gu Yucun, Khayat Kamal (2025-10)
    Enhanced Shape Stability of Flowable Mortar Through CO2 Injection for 3D Concrete Printing Application
  8. Chen Qinbin, Barbat Gabriel, Cervera Miguel (2025-06)
    Finite Element Buildability Analysis of 3D Printed Concrete Including Failure by Elastic Buckling and Plastic Flow
  9. Song Xinlei, Xu Quanbiao, Wang Hailong, Sun Xiaoyan et al. (2025-05)
    Flowability-Dependent Anisotropic Mechanical Properties of 3D Printing Concrete:
    Experimental and Theoretical Study
  10. Xia Zhenjiang, Geng Jian, Zhou Zhijie, Liu Genjin (2025-01)
    Comparative Analysis of Polypropylene, Basalt, and Steel Fibers in 3D Printed Concrete:
    Effects on Flowability, Printabiliy, Rheology, and Mechanical Performance
  11. Zhang Tianjie, Wang Donglei, Lu Yang (2025-01)
    A Navier-Stokes-Informed Neural Network for Simulating the Flow-Behavior of Flowable Cement-Paste in 3D Concrete Printing
  12. Sun Yubo, Zhang Xinyue, Zhou Jiangang, Wang Yilin et al. (2024-11)
    Extrudability-Analysis of 3D Printable Concrete as a Two-Phase Discrete Flow
  13. Lindner Marco, Gliniorz Ralf, Funke Henrik, Männel Mike et al. (2024-10)
    Tool-Development for Pre-Cast Concrete Elements in Robot-Assisted Flow-Production
  14. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2024-09)
    Additive Flow Production of Lightweight Precision Concrete Elements
  15. Ivaniuk Egor, Tošić Zlata, Lordick Daniel, Mechtcherine Viktor (2024-09)
    Flow Production of Variable Curved Modules for Thin-Walled Concrete Shell Structures
  16. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2024-09)
    Development of a Tool for Generating a Constant Volume-Flow with Peristaltic Pumps for Robot-Controlled Concrete-Extrusion
  17. Mahdy Deena, Abdelrahim Marwa, Alatassi Adel (2024-09)
    Assessment of Air-Flow Performance Through Openings in 3D Printed Earthen Structure Using CFD Analysis
  18. Song Xinlei, Sun Xiaoyan, Wang Hailong (2024-09)
    Determination of Optimal Flowability of 3D Printing Concrete Based on Multi-Objective Optimization Method
  19. Schönsee Eric, Jeyifous Olubunmi, Strangfeld Christoph, Hüsken Götz (2024-09)
    Investigations on Multi-Sensor Data for Monitoring Volume Flow During the Printing Process
  20. Bono Victor, Demont Léo, Ducoulombier Nicolas, Mesnil Romain et al. (2024-09)
    Large-Scale 3D Printing of a Shell Structure Reinforced by the Flow-Based Pultrusion Process
  21. Ma Liangzhu, Yin Deshun, Ren Jiangtao, Tian Mingyuan et al. (2024-09)
    An Effective Thixotropic Structural-Dynamics Rheological-Model for 3D Printed Concrete Materials in the Flow-State
  22. Ravindran Vishwanath, Ranganathan Thiyagarajan, Rahul Attupurathu (2024-08)
    Migration of Particles Suspended in Yield-Stress Fluids:
    Insights from Numerical Simulation of Pipe Flow of 3D Printable Concrete
  23. Malik Umair, Riaz Raja, Rehman Saif, Usman Muhammad et al. (2024-07)
    Advancing Mix-Design Prediction in 3D Printed Concrete:
    Predicting Anisotropic Compressive Strength and Slump-Flow
  24. Ahi Oğulcan, Ertunç Özgür, Bundur Zeynep, Bebek Özkan (2024-02)
    Automated Flow-Rate-Control of Extrusion for 3D Concrete Printing Incorporating Rheological Parameters
  25. Zhang Hongmei, Hu Fan, Duan Yuanfeng, Liao Jian et al. (2024-02)
    Mechanical Properties and Micro-Structure of Highly Flowable Geopolymer Composites with Low-Content Polyvinyl-Alcohol-Fiber
  26. Polychronopoulos Nickolas, Sarris Ioannis, Vlachopoulos John (2024-01)
    Flow-Analysis of Screw-Extrusion in Three-Dimensional Concrete Printing
  27. Meere Hani, Yan Shuaxing, Wang Dongpo, Bi Yuzhang (2024-01)
    Behavior of Traditional Concrete Dams and Three-Dimensional Printed Concrete Dams Under the Debris Flow Impact
  28. Lindner Marco, Gliniorz Ralf, Männel Mike, Garbe Daniel et al. (2023-12)
    Tool-Developments for Additive Manufacturing-Processes with Anchor for the Modern Flow-Production
  29. Dimitriou Savvas, Kontovourkis Odysseas (2023-11)
    Force-Flow Based 3D Printing of Structural Elements Inspired by the Traditional Architecture of Cross-Vaults
  30. Bui Van-Bien, Pham Thi, Pham Duc, Do Thi (2023-11)
    Accuracy Evaluation of Slump and Slump-Flow-Test for 3D Concrete Printing with the Kinect v1
  31. Pan Tinghong, Guo Rongxin, Fu Chaoshu, Ji Xuping et al. (2023-10)
    Extrusion-Based 3D Concrete Printing with Different Flow-Direction
  32. Vele Jiří, Kurilla Lukáš, Achten Henri (2023-09)
    Improving Buildability of Overhangs of 3D Printed Objects Through Non-Planar Slicing Informed by Force-Flow-Analysis
  33. Polychronopoulos Nickolas, Sarris Ioannis, Benos Lefteris, Vlachopoulos John (2023-09)
    Pressure-Drop in Converging Flows in Three-Dimensional Printing of Concrete
  34. Dörrie Robin, Freund Niklas, Herrmann Eric, Baghdadi Abtin et al. (2023-09)
    Automated Force-Flow-Oriented Reinforcement Integration for Shotcrete 3D Printing
  35. Lachmayer Lukas, Müller Nico, Herlyn Thilo, Raatz Annika (2023-08)
    Volume Flow-Based Process-Control for Robotic Additive Manufacturing-Processes in Construction
  36. Xie Xiangyu, Liu Xuemei, Ding Faxing, Zhang Lihai (2023-08)
    Characteristics and Mechanism of the Particle-Migration Subject to the Shear Flow of Concrete Flow Under Pressure
  37. Zhu Jinggao, Ren Xiaodan, Cervera Miguel (2023-07)
    Peridynamic Buildability-Analysis of 3D Printed Concrete Including Damage, Plastic Flow and Collapse
  38. Şahin Hatice, Temel Müge, Mardani Ali (2023-04)
    Determination of Optimum VMA Utilization Dosage in Cementitious Systems:
    In Terms of Rheological and Flowability Properties
  39. Harbouz Ilhame, Yahia Ammar, Rozière Emmanuel, Loukili Ahmed (2023-02)
    Printing Quality-Control of Cement-Based Materials Under Flow and Rest-Conditions
  40. Tran Mien, Vu Tran, Nguyen Thi (2023-01)
    Simplified Assessment for One-Part 3D Printable Geopolymer Concrete Based on Slump and Slump-Flow Measurements
  41. Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping et al. (2022-11)
    Flow and Deformation Behaviors of Cementitious Materials Through Nozzles with Different Geometric Parameters:
    Experimental and Numerical Approaches
  42. Diwan Anushree, Patel Shiv, Pal Ankit, Dwivedi Ashutosh et al. (2022-10)
    Flow Characteristics of Cement Mortar with Varied Silica-Fume for Additive Construction
  43. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2022-09)
    Robot-Assisted Flow-Production-Processes Tool-Development for the Fabrication of Thin-Walled Fiber-Reinforced Concrete Elements
  44. Zafar Muhammad, Bakhshi Amir, Hojati Maryam (2022-09)
    Toward 3D Printable Engineered Cementitious Composites:
    Mix-Design Proportioning, Flowability, and Mechanical Performance
  45. Tao Yaxin, Ren Qiang, Lesage Karel, Tittelboom Kim et al. (2022-07)
    Shape Stability of 3D Printable Concrete with River and Manufactured Sand Characterized by Squeeze Flow
  46. Dörrie Robin, Kloft Harald (2022-06)
    Force-Flow Compliant Robotic Path-Planning Approach for Reinforced Concrete Elements Using SC3DP
  47. Gantner Stefan, Rennen Philipp, Rothe Tom, Hühne Christian et al. (2022-06)
    Core Winding:
    Force-Flow-Oriented Fiber-Reinforcement in Additive Manufacturing with Concrete
  48. Demont Léo, Charrier Malo, Margerit Pierre, Ducoulombier Nicolas et al. (2022-06)
    Flow-Based Pultrusion of Anisotropic Concrete:
    Mechanical Properties at Hardened State
  49. Zhang Chao, Deng Zhicong, Chen Chun, Zhang Yamei et al. (2022-03)
    Predicting the Static Yield-Stress of 3D Printable Concrete Based on Flowability of Paste and Thickness of Excess-Paste-Layer
  50. Peerzada Abdul, Rangaraju Prasad, Roberts James, Biehl Adam (2022-03)
    Influence of External Vibration on the Gravitational Flow Characteristics of Cementitious Materials:
    A Perspective from Application in Additive Manufacturing
  51. Xie Xiangyu, Zhang Lihai, Shi Caijun, Liu Xuemei (2022-01)
    Prediction of Lubrication-Layer Properties of Pumped Concrete Based on Flow-Induced Particle-Migration
  52. Zhang Jiale, Luo Hanbin, Xu Jie (2021-12)
    Towards Fully BIM-Enabled Building Automation and Robotics:
    A Perspective of Lifecycle Information Flow
  53. Tavangar Tooran, Hosseinpoor Masoud, Yahia Ammar, Khayat Kamal (2021-12)
    Novel Tri-Viscous-Model to Simulate Pumping of Flowable Concrete Through Characterization of Lubrication-Layer and Plug-Zones
  54. Xu Zhisong, Li Zhuguo, Jiang Fei (2021-11)
    Numerical Approach to Pipe Flow of Fresh Concrete Based on MPS Method
  55. Ramyar Elham, Cusatis Gianluca (2021-11)
    Discrete Fresh Concrete-Model for Simulation of Ordinary, Self-Consolidating, and Printable Concrete-Flow
  56. Tavangar Tooran, Hosseinpoor Masoud, Yahia Ammar, Khayat Kamal (2021-11)
    Computational Investigation of Concrete-Pipe-Flow:
    Critical Review
  57. Nair Sooraj, Neithalath Narayanan (2021-11)
    Flow Characterization of Three-Dimensional Printable Cementitious Pastes During Extrusion Using Capillary-Rheometry
  58. Rodriguez Fabian, Olek Jan, Moini Mohamadreza, Zavattieri Pablo et al. (2021-11)
    Linking Solids Content and Flow Properties of Mortars to Their Three-Dimensional Printing Characteristics
  59. Wi Kwangwoo, Hong Jinxiang, Wang Kejin (2021-11)
    Determining Printable Zone of Three-Dimensional-Printable Mortar Using Flow-Table Tests
  60. Xu Emily, Tejada Karin, Walker David, Zivkovic Sasa et al. (2021-11)
    Measuring Flow- and Setting-Time for Three-Dimensionally Printed Mortar:
    Case Study
  61. Lee Hojae, Seo Eun-A, Kim Won-Woo, Moon Jae-Heum (2021-10)
    Experimental Study on Time-Dependent Changes in Rheological Properties and Flow-Rate of 3D Concrete Printing Materials
  62. Wi Kwangwoo, Wang Kejin, Taylor Peter, Laflamme Simon et al. (2021-09)
    Properties and Microstructure of Extrusion-Based 3D Printing Mortar Containing a Highly Flowable, Rapid Set Grout
  63. Wu Weiwei, Wang Zhongyu, Ding Shuang, Song Aiping (2021-01)
    Effect Research of Cement Block on Paste-Flow for 3D Cement Printing Based on an Improved Lattice-Boltzmann Method
  64. Vallurupalli Kavya, Farzadnia Nima, Khayat Kamal (2021-01)
    Effect of Flow Behavior and Process-Induced Variations on Shape Stability of 3D Printed Elements:
    A Review
  65. Demont Léo, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2021-01)
    Flow-Based Pultrusion of Continuous Fibers for Cement-Based Composite Material and Additive Manufacturing:
    Rheological and Technological Requirements
  66. Jacquet Yohan, Picandet Vincent, Rangeard Damien, Perrot Arnaud (2020-12)
    Gravity-Induced Flow to Characterize Rheological Properties of Printable Cement-Based Materials
  67. Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2020-11)
    Additive Manufacturing of Cementitious Materials by Selective Paste-Intrusion:
    Numerical Modeling of the Flow Using a 2D-Axisymmetric Phase-Field-Method
  68. Shahzad Qamar, Wang Xujiang, Wang Wenlong, Wan Yi et al. (2020-06)
    Coordinated Adjustment and Optimization of Setting-Time, Flowability, and Mechanical Strength for Construction 3D Printing Material Derived from Solid Waste
  69. Ducoulombier Nicolas, Demont Léo, Chateau Camille, Bornert Michel et al. (2020-04)
    Additive Manufacturing of Anisotropic Concrete:
    A Flow-Based Pultrusion of Continuous Fibers in a Cementitious Matrix
  70. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Sanjayan Jay (2019-12)
    Dimensional Accuracy, Flowability, Wettability, and Porosity in Inkjet 3DP for Gypsum and Cement Mortar Materials
  71. Zhang Chao, Hou Zeyu, Chen Chun, Zhang Yamei et al. (2019-09)
    Design of 3D Printable Concrete Based on the Relationship Between Flowability of Cement-Paste and Optimum Aggregate-Content
  72. Tay Yi, Qian Ye, Tan Ming (2019-05)
    Printability-Region for 3D Concrete Printing Using Slump- and Slump-Flow-Test
  73. Huang Tiancheng, Gu Hai, Zhang Jie, Li Bin et al. (2018-11)
    An Improved Multi-Relaxation Time Lattice Boltzmann Method for the Non-Newtonian Influence of the Yielding Fluid Flow in Cement-3D Printing
  74. Secrieru Egor, Khodor Jad, Schröfl Christof, Mechtcherine Viktor (2018-05)
    Formation of Lubricating Layer and Flow Type During Pumping of Cement-Based Materials
  75. Annapareddy Ashokreddy, Panda Biranchi, Ting Guan, Li Mingyang et al. (2018-05)
    Flow And Mechanical Properties of 3D Printed Cementitious Material With Recycled Glass-Aggregates
  76. Choi Myoungsung, Park Kyoungsoo, Oh Taekeun (2016-06)
    Viscoelastic Properties of Fresh Cement-Paste to Study the Flow Behavior
  77. Duro-Royo Jorge, Mogas-Soldevila Laia, Oxman Neri (2015-06)
    Flow-Based Fabrication:
    An Integrated Computational Workflow for Design and Digital Additive Manufacturing of Multifunctional Heterogeneously Structured Objects
  78. Mechtcherine Viktor, Gram Annika, Krenzer Knut, Schwabe Jörg-Henry et al. (2014-03)
    Simulation of Fresh Concrete Flow Using Discrete Element Method (DEM)
  79. Roussel Nicolas, Gram Annika (2014-03)
    Physical Phenomena Involved in Flows of Fresh Cementitious Materials
  80. Deng Shou-chang, Zhang Xue-bing, Qin Ying-hui, Luo Guan-xiang (2007-02)
    Rheological Characteristic of Cement Clean Paste and Flowing Behavior of Fresh Mixing Concrete with Pumping in Pipeline