Concrete Choreography (2020-09)¶
Prefabrication of 3D Printed Columns
, , , , , ,
Contribution - Fabricate 2020, pp. 286-293
Abstract
This paper introduces the cutting-edge 3D Concrete Printing (3DCP) process which stands at the core of the project Concrete Choreography, a family of nine prefabricated concrete columns. By simultaneously overseeing technological development, computational design and robotic fabrication, an interdisciplinary research team was able to reframe the challenge of large-scale high-resolution 3DCP.
¶
7 References
- Anton Ana-Maria, Yoo Angela, Bedarf Patrick, Reiter Lex et al. (2019-10)
Vertical Modulations - Duballet Romain, Baverel Olivier, Dirrenberger Justin (2017-08)
Classification of Building Systems for Concrete 3D Printing - Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
Large-Scale 3D Printing of Ultra-High-Performance Concrete:
A New Processing Route for Architects and Builders - Khoshnevis Behrokh (2003-11)
Automated Construction by Contour Crafting:
Related Robotics and Information Technologies - Labonnote Nathalie, Rønnquist Anders, Manum Bendik, Rüther Petra (2016-09)
Additive Construction:
State of the Art, Challenges and Opportunities - Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2018-06)
The Role of Early-Age Structural Build-Up in Digital Fabrication with Concrete - Wangler Timothy, Roussel Nicolas, Bos Freek, Salet Theo et al. (2019-06)
Digital Concrete:
A Review
59 Citations
- Ma Wei, Chen Junjie, Dai Yuntong, Zhou Yaya et al. (2025-10)
Mechanical Properties of 3D Printed Concrete Irregular Structural Formwork:
Experimental Study and Finite Element Analysis - Keller Petr, Mendřický Radomír (2025-09)
Analysis of Object Deformations Printed by Additive Manufacturing from Concrete Mixtures over Time - Baritakis Mario, Traine Phillip, Granzow Jan, Döbert Christine (2025-08)
3D-Printed Clay Formwork for Topology:
Optimized Concrete Elements - Shiotani Tomoki, Asaue Hisafumi, Ogura Hiroki, Okude Nobuhiro et al. (2025-07)
Evaluation of Permanent 3D Printed Formwork of a Bridge Pier Using Non-Destructive Testing Methods - Haar Bjorn, Kruger Jacques, Zijl Gideon (2025-06)
3D Printed Concrete Pinned Beam-Column Connection Development - Girskas Giedrius, Kligys Modestas (2025-06)
3D Concrete Printing Review:
Equipment, Materials, Mix Design, and Properties - Jin Chenxi, Xu Chenhan, Xu Weishun (2025-05)
Integrating 3D-Printed Clay Formwork into Thin-Vaulted Green Roof - Latifiilkhechi Leva, Aminbakhsh Saman, Akcay Emre (2025-03)
Investigating the Barriers to the Adoption of 3D Printing Technology in the Turkish Construction Industry - Salaimanimagudam M., Jayaprakash Jaganathan, Anwar Mohammed (2025-02)
Selection of Reinforcement Incorporation Method for 3D Printed Concrete Using MCDM - Yu Jie, Teng Fei, Ye Junhong, Zhang Dong et al. (2025-01)
Size-Dependent Model to Predict the Flexural-Strength of 3D Printed Engineered Cementitious Composites Beams - Wang Hailong, Shen Junyi, Sun Xiaoyan, Dong Weiwei et al. (2024-12)
Numerical Investigation on Shear Behavior of Reinforced Concrete Beam with 3D Printed Concrete Permanent Formwork - Kleibel-McGee Kilian, Gosch Lukas, Jauk Julian, Ristoski Kristijan et al. (2024-11)
Integration of Weaving- and Sewing-Motions into the 3D Printing of Clay for Lightweight Ceramic-Structures - Kamhawi Abdallah, Meibodi Mania (2024-09)
Techniques and Strategies in Extrusion-Based 3D Concrete Printing of Complex Components to Prevent Premature Failure - Anton Ana-Maria, Dillenburger Benjamin (2024-09)
Towards a Sustainable 3D‐Concrete‐Printed Architecture:
Assemblies, Detailing and Ornamentation - Lima Lucas, Wangler Timothy, Sanchez Asel, Anton Ana-Maria et al. (2024-09)
Durability of 3D Printed Concrete:
Performance-Assessment of a Two-Component System Against Water Absorption, Carbonation, and Chloride-Ingress - Migliorino Jenna, Ahmed Aly, Mackin Anthony, Hanoun Zaid et al. (2024-09)
Topology-Optimization-Based Additive Construction for Sustainability - Du Guoqiang, Sun Yan, Qian Ye (2024-08)
3D Printed Strain-Hardening Cementitious Composites (3DP-SHCC) Reticulated Shell Roof Inspired by the Water Spider - Huang Shuyi, Xu Weiguo, Anton Ana-Maria, Dillenburger Benjamin (2024-08)
Self-Supporting Lamellae:
Shape Variation Methods for the 3D Concrete Printing of Large Overhang Structures - Salaimanimagudam M., Jayaprakash Jaganathan (2024-07)
Selection of Digital Fabrication Technique in the Construction Industry:
A Multi-Criteria Decision-Making Approach - Wangler Timothy, Vangen Kathrina, Burger Joris, Flatt Robert (2024-05)
Digital Fabrication Material-Processing-Strategy for Bespoke Low-Clinker Mass-Concrete Components - Anton Ana-Maria, Lin Che, Skevaki Eleni, Wang Mingyang et al. (2024-04)
Tor Alva:
A 3D Concrete Printed Tower - Westerlind Helena, Vargas José, Silfwerbrand Johan (2024-01)
Towards the Application of Mesostructures in 3D Concrete Printing:
Evaluating Load-bearing Performance - Ye Junhong, Zhang Jiangdi, Yu Jie, Yu Jiangtao et al. (2023-11)
Flexural Behaviors of 3D Printed Lightweight Engineered Cementitious Composites (ECC) Slab with Hollow Sections - Wolf Alexander, Carvalho João, Figueiredo Bruno, Cruz Paulo et al. (2023-09)
Support-Strategies for Robocasting Ceramic Building Components - Bong Shin, Nematollahi Behzad, Mechtcherine Viktor, Li Victor et al. (2023-09)
3D Printed Engineered, Strain-Hardening Geopolymer Composite as Permanent Formwork for Construction of Reinforced Concrete Beam - Jewett Jackson, Carstensen Josephine (2023-09)
Topology-Optimization for Material-Extrusion-Based Additive Manufacturing-Processes with Weak Bead Bonding - Liu Dawei, Zhang Zhigang, Zhang Xiaoyue, Chen Zhaohui (2023-09)
3D Printing Concrete Structures:
State of the Art, Challenges, and Opportunities - Mogra Mihir, Asaf Ofer, Sprecher Aaron, Amir Oded (2023-08)
Design-Optimization of 3D Printed Concrete Elements Considering Buildability - Ramani Ayyagari, Chen Qian, Soto Borja (2023-08)
Quantifying the Impact of Concrete 3D Printing on the Construction Supply Chain - Placzek Gerrit, Schwerdtner Patrick (2023-07)
Concrete Additive Manufacturing in Construction:
Integration Based on Component-Related Fabrication-Strategies - Dell’Endice Alessandro, Bouten Sam, Mele Tom, Block Philippe (2023-07)
Structural Design and Engineering of Striatus, an Unreinforced 3D Concrete Printed Masonry Arch Bridge - Mozaffari Salma, Bruce Mackenzie, Clune Gabrielle, Xie Ruxin et al. (2023-06)
Digital Design and Fabrication of Clay Formwork for Concrete Casting - Huang Shuyi, Xu Weiguo, Yin Yudong (2023-03)
Improving the Overhang of 3D Printed Concrete Shells by Wrinkle Structures - Teixeira João, Schaefer Cecília, Rangel Bárbara, Maia Lino et al. (2022-11)
A Road Map to Find in 3D Printing a New Design Plasticity for Construction:
The State of Art - Salaimanimagudam M., Jayaprakash Jaganathan (2022-11)
Optimum Selection of Reinforcement, Assembly, and Formwork System for Digital Fabrication Technique in Construction Industry:
A Critical Review - Xu Weiguo, Huang Shuyi, Han Dong, Zhang Zhiling et al. (2022-08)
Toward Automated Construction:
The Design-to-Printing Workflow for a Robotic In-Situ 3D Printed House - Anton Ana-Maria, Reiter Lex, Skevaki Eleni, Dillenburger Benjamin (2022-07)
Reinforcement Lattices for 3DCP:
A Fabrication Method Based on Ruled Surfaces - Kandy Sharu, Mehdipour Iman, Neithalath Narayanan, Kumar Aditya et al. (2022-07)
Ultrafast Stiffening of Concentrated Thermoresponsive Mineral-Suspensions - Dielemans Gido, Lachmayer Lukas, Recker Tobias, Atanasova Lidia et al. (2022-06)
Mobile Additive Manufacturing:
A Case Study of Clay Formwork for Bespoke In-Situ Concrete Construction - Sitnikov Vasily, Kitani Lena, Maneka Artemis, Lloret-Fritschi Ena et al. (2022-06)
Design and Fabrication of Spatially Graded Concrete Elements with Ice Aggregate Method - Wangler Timothy, Aguilar Sanchez Asel, Anton Ana-Maria, Dillenburger Benjamin et al. (2022-06)
Two Year Exposure of 3D Printed Cementitious Columns in a High-Alpine Environment - Lloret-Fritschi Ena, Quadranti Elia, Scotto Fabio, Fuhrimann Lukas et al. (2022-05)
Additive Digital Casting:
From Lab to Industry - Huang Shuyi, Xu Weiguo, Li Yuqian (2022-04)
The Impacts of Fabrication Systems on 3D Concrete Printing Building Forms - Jipa Mihail-Andrei, Dillenburger Benjamin (2022-04)
3D Printed Formwork for Concrete:
State of the Art, Opportunities, Challenges, and Applications - Aguilar Sanchez Asel, Wangler Timothy, Stefanoni Matteo, Angst Ueli (2022-02)
Microstructural Examination of Carbonated 3D Printed Concrete - Heidarnezhad Fatemeh, Zhang Qian (2022-01)
Shotcrete-Based 3D Concrete Printing:
State of Art, Challenges, and Opportunities - Bruce Mackenzie, Clune Gabrielle, Xie Ruxin, Mozaffari Salma et al. (2021-11)
Cocoon:
3D Printed Clay Formwork for Concrete Casting - Shaker Aya, Khader Noor, Reiter Lex, Anton Ana-Maria (2021-11)
3D Printed Concrete Tectonics - Pekuss Raitis, Ancupane Amelija, Soto Borja (2021-11)
Quantifying the Complexity of 3D Printed Concrete Elements - Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2021-06)
Technologies for Improving Buildability in 3D Concrete Printing - Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2021-04)
Structural Behavior of 3D Printed Concrete Beams with Various Reinforcement-Strategies - Zhu Binrong, Nematollahi Behzad, Pan Jinlong, Zhang Yang et al. (2021-04)
3D Concrete Printing of Permanent Formwork for Concrete Column Construction - Zhu Binrong, Pan Jinlong, Zhou Zhenxin, Cai Jingming (2021-04)
Mechanical Properties of Engineered Cementitious Composites Beams Fabricated by Extrusion-Based 3D - Zhan Qiang, Zhou Xinjie, Yuan Philip, Zhou Xinjie (2021-04)
Design and Fabrication of a 3D Concrete Printed Pre-Stressed Bridge - Cohen Zach (2021-03)
Recasting Concrete:
A Case Study in Concrete 3D Printing as an Architectural Pedagogy - Anton Ana-Maria, Reiter Lex, Wangler Timothy, Frangez Valens et al. (2020-12)
A 3D Concrete Printing Prefabrication Platform for Bespoke Columns - Bester Frederick, Heever Marchant, Kruger Jacques, Zijl Gideon (2020-11)
Reinforcing Digitally Fabricated Concrete:
A Systems Approach Review - Anton Ana-Maria, Jipa Mihail-Andrei, Reiter Lex, Dillenburger Benjamin (2020-10)
Fast Complexity - Mohamed Shibly Maahir, Soto Borja (2020-10)
Threat Modeling in Construction:
An Example of a 3D Concrete Printing System
BibTeX
@inproceedings{anto_beda_yoo_dill.2020.CC,
author = "Ana-Maria Anton and Patrick Bedarf and Angela Yoo and Benjamin Dillenburger and Lex Reiter and Timothy Paul Wangler and Robert Johann Flatt",
title = "Concrete Choreography: Prefabrication of 3D Printed Columns",
doi = "10.2307/j.ctv13xpsvw.41",
year = "2020",
pages = "286--293",
booktitle = "Fabricate 2020",
editor = "Jane Burry and Jenny Sabin and Bob Sheil and Marilena Skavara",
}
Formatted Citation
A.-M. Anton, “Concrete Choreography: Prefabrication of 3D Printed Columns”, in Fabricate 2020, 2020, pp. 286–293. doi: 10.2307/j.ctv13xpsvw.41.
Anton, Ana-Maria, Patrick Bedarf, Angela Yoo, Benjamin Dillenburger, Lex Reiter, Timothy Paul Wangler, and Robert Johann Flatt. “Concrete Choreography: Prefabrication of 3D Printed Columns”. In Fabricate 2020, edited by Jane Burry, Jenny Sabin, Bob Sheil, and Marilena Skavara, 286–93, 2020. https://doi.org/10.2307/j.ctv13xpsvw.41.