#three
Keywords by Co - Occurrence
- Zhang Junyi, Zhang Chao, Chen Tiefeng, Li Ruisen et al. (2026-01)
Biochar as the Rheological Modifier in Three-Dimensional Printed Concrete
- Deng North, Wang Sizhe, Li Mingyang, Wang Xiangyu et al. (2025-12)
A Perforated Strip-Based Three-Dimensional Reinforcement Strategy for 3D Printed Concrete:
Flexural Testing of Beams as a Proof of Concept
- Adeel Muhammad (2025-11)
Three-Dimensional Concrete Printing for Sustainable Construction and Architecture:
A Comprehensive Review
- Hasani Alireza, Dorafshan Sattar (2025-11)
Evaluation of Fresh, Hardened, and Durability Properties of Three-Dimensional Concrete Printed Pipes
- Ding Tao, Zhu Ruitao, Yu Kequan, Xiao Jianzhuang (2025-10)
Direct Tensile Behavior of Three-Dimensional-Printable Steel Fiber-Reinforced Ultrahigh Performance Concrete
- Chen Wenguang, Liang Long, Ye Junhong, Liu Lingfei et al. (2025-09)
Machine Learning-Enabled Performance-Based Design of Three-Dimensional Printed Engineered Cementitious Composites
- Nandurkar Bhupesh, Raut Jayant, Hinge Pawan, Bahoria Boskey et al. (2025-06)
Multi-Scale Deep Learning Framework for Three Dimensional Printed Self-Sensing Cementitious Composites with Hybrid Nano-Carbon Fillers
- Ding Shengxuan, Li Jiren, Liu Yiming (2025-06)
Study on Mechanical Properties and Environmental Benefits of 3D Printed Lean Magnesium Ore Concrete Filled Columns Based on Three-Dimensional Meso-Structure
- Yuan Yong, Sheng Ruyi, Yao Xupeng, Pichler Bernhard et al. (2025-03)
A Three-Step Development Strategy for 3D Printable Concrete Containing Coarse Aggregates
- Özalp Abdulkadir, Aldemir Alper (2025-03)
Artificial Intelligence-Based Displacement Capacity Prediction Tool for Three-Dimensional Printed Concrete Walls
- Nadi Mouad, Majdoubi Hicham, Haddaji Younesse, Bili Oumaima et al. (2025-01)
Digital Fabrication Processes for Cementitious Materials Using Three-Dimensional 3D Printing Technologies
- Alam Shaurav, Gordon Stephen, Bassett Blake, Cobb Kevin et al. (2025-01)
Three-Dimensional Printing of Fly-Ash-Based Geopolymer Materials
- Omur Tarik, Akpunar Ahmet, Bingöl Ayşe, Oktay Büşra et al. (2025-01)
The Influence of Phase-Change-Material Filled Three-Dimensional Printed Artificial Aggregates on the Properties of Blast-Furnace-Slag Based Alkali-Activated Concrete
- Qian Sen, Li Changqi, Zhao Zeyap, Zi Bin (2024-11)
Modeling and Experimental Validation of a Cable-Driven Robot for Three-Dimensional Printing Construction
- Loporcaro Giuseppe, Scott Allan, Clucas Don, Palermo Alessandro et al. (2024-11)
Sustainable Resilience for 3D Concrete Printed Homes in New Zealand:
A Three Years Research Government Funding Overview
- Giacomobono Leonardo, Argenti Maria, Ferretti Elena, Paparella Giulio (2024-08)
Three-Dimensional Printing with Earthen Materials:
A Settlement-Scale Design Experience
- Huseien Ghasan, Tan Shea, Saleh Ali, Lim Nor et al. (2024-08)
Test-Procedures and Mechanical Properties of Three-Dimensional Printable Concrete Enclosing Different Mix-Proportions:
A Review and Bibliometric Analysis
- Prem Prabhat, Ambily Parukutty, Kumar Shankar, Giridhar Greeshma et al. (2024-07)
Structural Build-Up-Model for Three-Dimensional Concrete Printing Based on Kinetics-Theory
- Bekaert Michiel, Tittelboom Kim, Schutter Geert (2024-07)
Influence of Curing Conditions on the Shrinkage Behavior of Three-Dimensional Printed Concrete Formwork
- Cui Weijiu, Sun Haijun, Zhou Jiangang, Wang Sheng et al. (2024-07)
Geometric Quality Evaluation of Three-Dimensional Printable Concrete Using Computational Fluid Dynamics
- Shen Jing, Li Yujia, Zhang Xiaoman, Li Yangbo et al. (2024-06)
Three-Dimensional Printable Concrete by an Ultra-Thin Nozzle and Fully-Sealed Extrusion
- Seifan Mostafa (2024-06)
Sustainable Three-Dimensional Printing Concrete:
Advances, Challenges, and Future Direction
- Sadakorn Wannapol, Prasertsuk Santirak, Prasittisopin Lapyote (2024-06)
Improving the Structural Efficiency of Textured Three-Dimensional Concrete Printing Wall by Architectural Design
- Yang Chao, Xu Xinglong, Lei Zuxiang, Sun Junbo et al. (2024-06)
Enhancing Mechanical Properties of Three-Dimensional Concrete at Elevated Temperatures Through Recycled Ceramic-Powder Treatment Methods
- Kajzr Daniel, Myslivec Tomáš, Černohorský Josef (2024-05)
Modelling, Analysis and Comparison of Robot Energy Consumption for Three-Dimensional Concrete Printing Technology
- Jiang Wei, Li Wenqian, Chen Xi (2024-05)
An Extended Numerical Model of the First Exothermic Peak for Three Dimensional Printed Cement-Based Materials
- Chen Anguo, Dai Pengfei, Lyu Qifeng (2024-05)
Effect of Alkalized Straw-Fibers on the Properties of Three Dimensional Printed Cementitious Composite
- Kompella Sriram, Marcucci Andrea, Monte Francesco, Levi Marinella et al. (2024-04)
Fracture Behavior of Three-Dimensional-Printable Cementitious Mortars in Very Early-Ages and Hardened States
- Tripathi Avinaya, Nair Sooraj, Chauhan Harshitsinh, Neithalath Narayanan (2024-04)
Print Geometry Alterations and Layer-Staggering to Enhance Mechanical Properties of Plain and Fiber-Reinforced Three-Dimensional-Printed Concrete
- Alhaidary Haidar (2024-03)
Three-Dimensional Concrete Printing as a Construction-Automation-Strategy and Assessments from a Case Study Building
- Ivaniuk Egor, Mechtcherine Viktor (2024-03)
Approach for Production of Textile-Reinforced Beams and Slabs Using Three-Dimensional Concrete Printing
- Jiang Xiongzhi, Li Yujia, Yang Zhe, Li Yangbo et al. (2024-02)
Harnessing Path-Optimization to Enhance the Strength of Three-Dimensional Printed Concrete
- Buson Márcio, Varum Humberto, Rezende Marco (2024-01)
First Impressions on Three-Dimensional Printing with Earth-Based Mortar at the Faculty of Engineering of the University of Porto
- Polychronopoulos Nickolas, Sarris Ioannis, Vlachopoulos John (2024-01)
Flow-Analysis of Screw-Extrusion in Three-Dimensional Concrete Printing
- Wang Qinghua, Xu Jinggang, Feng Duo, Li Wei et al. (2024-01)
Properties and Printability Evaluation of Three-Dimensional Printing Magnesium-Oxychloride Cement by Fully Utilizing Aeolian-Sand
- Özalp Fatih (2024-01)
Mechanical Behavior and Permeability Properties of Sustainable and High-Performance Anisotropic Three-Dimensional Printable Concrete
- Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-01)
Experimental and Numerical Evaluation of Multi-Directional Compressive and Flexure Behavior of Three-Dimensional Printed Concrete
- Tang Yuxiang, Xiao Jianzhuang, Ding Tao, Liu Haoran et al. (2024-01)
Trans-Layer and Inter-Layer Fracture Behavior of Extrusion-Based 3D Printed Concrete Under Three-Point Bending
- Meere Hani, Yan Shuaxing, Wang Dongpo, Bi Yuzhang (2024-01)
Behavior of Traditional Concrete Dams and Three-Dimensional Printed Concrete Dams Under the Debris Flow Impact
- Li Feng, Zhang Rongrong, Zhou Siqi, Zhu Xingyi (2023-12)
Printability and Hardening Performance of Three-Dimensionally-Printed Geopolymer Based on Lunar Regolith Simulant for Automated Construction of Lunar Infrastructure
- Zhi Peng, Wu Yuching, Rabczuk Timon (2023-11)
Effects of Time-Varying Liquid Bridge Forces on Rheological Properties, and Resulting Extrudability and Constructability of Three-Dimensional Printing Mortar
- Wang Yu, Rodriguez Fabian, Olek Jan, Zavattieri Pablo et al. (2023-11)
Influence of Type of Fibers on Fresh and Hardened Properties of Three-Dimensional-Printed Cementitious Mortars
- Reinold Janis, Daadouch Koussay, Meschke Günther (2023-11)
Numerical Simulation of Three Dimensional Concrete Printing Based on a Unified Fluid and Solid Mechanics Formulation
- Ebadi-Jamkhaneh Mehdi, Kontoni Denise-Penelope, Ebrahimi Amir (2023-10)
Three-Dimensional Printing of Structural Members with Shotcrete Technique:
Design, Construction, and Future Directions
- Kurniati Eka, Kim Heejeong (2023-10)
Utilizing Industrial Byproducts for Sustainable Three-Dimensional-Printed Infrastructure Applications:
A Comprehensive Review
- Polychronopoulos Nickolas, Sarris Ioannis, Benos Lefteris, Vlachopoulos John (2023-09)
Pressure-Drop in Converging Flows in Three-Dimensional Printing of Concrete
- Ghantous Rita, Evseeva Anastasiia, Dickey Brandon, Gupta Shashank et al. (2023-07)
Examining Effect of Printing-Directionality on Freezing-and-Thawing Response of Three-Dimensional-Printed Cement-Paste
- Arslan Volkan, Dogan Zekeriya (2023-04)
Three-Dimensional, Printable Paving Stone:
A Preliminary Study
- Zbyszyński Wojciech, Pietras Daniel, Sadowski Tomasz (2023-04)
Data-Image-Correlation-Analysis of the Destruction-Process of 3D Printable Layered Beams Subjected to the Three-Point Bending Process
- Boddepalli Uday, Gandhi Indu, Panda Biranchi (2022-12)
Stability of Three-Dimensional Printable Foam-Concrete as Function of Surfactant Characteristics
- Liu Xiongfei, Li Jixiang, Li Qi, Hou Gunayu (2022-11)
Mechanical Performance Optimization in Spray-Based Three-Dimensional-Printed Mortar Using Carbon-Fiber
- Wang Li, Yang Yu, Hu Yuanyuan, Ma Guowei (2022-11)
Interfacial Properties of Three-Dimensional-Printed Permanent Formwork with Cast-in-Place Concrete
- Kan Deyuan, Liu Guifeng, Cao Shuang, Chen Zhengfa et al. (2022-11)
Mechanical Properties and Pore-Structure of Multi-Walled Carbon-Nano-Tube-Reinforced Reactive Powder-Concrete for Three-Dimensional Printing Manufactured by Material-Extrusion
- Li Mingyang, Zhang Xu, Tay Yi, Ting Guan et al. (2022-07)
Three-Dimensional (3D) Printing for Building and Construction
- Hu Hao, Cao Xiaoxiao, Zhang Tao, Chen Zhenfu et al. (2022-05)
Three-Dimensional Printing Materials for Cultural Innovation Products of Historical Buildings
- Won Daeyoun, Hwang Bon-Gang, Chi Seokho, Kor Ju (2022-05)
Adoption of Three-Dimensional Printing Technology in Public Housing in Singapore:
Drivers, Challenges, and Strategies
- Zhou Jiehang, Du Longyu, Lai Jianzhong, Wang Qiang et al. (2022-03)
Preparation and High-Velocity Impact Experiment for Three-Dimensional-Printed Concrete
- Pham Luong, Lu Guoxing, Tran Jonathan (2022-02)
Influences of Printing-Pattern on Mechanical Performance of Three-Dimensional-Printed Fiber-Reinforced Concrete
- Nguyen Vuong, Choudhry Niranjan, Panda Biranchi, Nguyen-Xuan Hung et al. (2021-12)
Performance of Concrete Beam Reinforced with 3D Printed Bio-Inspired Primitive Scaffold Subjected to Three-Point Bending
- Paiva Maria, Duarte Fonseca Rocha Larissa, Fernandez Letízia, Toledo Filho Romildo et al. (2021-11)
Rheological Properties of Metakaolin-Based Geopolymers for Three-Dimensional Printing of Structures
- Murcia Heras, Abdellatef Mohammed, Genedy Moneeb, Taha Mahmoud (2021-11)
Rheological Characterization of Three-Dimensional-Printed Polymer Concrete
- Markin Slava, Schröfl Christof, Blankenstein Paul, Mechtcherine Viktor (2021-11)
Three-Dimensional-Printed Wood-Starch Composite as Support Material for 3D Concrete Printing
- Kruger Jacques, Cho Seung, Bester Frederick, Rooyen Algurnon et al. (2021-11)
Nano-Technology for Improved Three-Dimensional Concrete Printing Constructability
- Douba AlaEddin, Kawashima Shiho (2021-11)
Use of Nano-Clays and Methylcellulose to Tailor Rheology for Three-Dimensional Concrete Printing
- Wang Xiangyu, Khalil Abdullah, Celik Kemal (2021-11)
Three-Dimensional Printability of White-Portland-Cement Containing Ceno-Spheres
- Nishiwaki Tomoya, Miyata Yoshihiro, Furue Shoko, Fukatsu Shiko et al. (2021-11)
Reinforcing Interlayers of Three-Dimensional-Printed Mortar Using Metal-Fiber-Insertion
- Nair Sooraj, Neithalath Narayanan (2021-11)
Flow Characterization of Three-Dimensional Printable Cementitious Pastes During Extrusion Using Capillary-Rheometry
- Rodriguez Fabian, Olek Jan, Moini Mohamadreza, Zavattieri Pablo et al. (2021-11)
Linking Solids Content and Flow Properties of Mortars to Their Three-Dimensional Printing Characteristics
- Wi Kwangwoo, Hong Jinxiang, Wang Kejin (2021-11)
Determining Printable Zone of Three-Dimensional-Printable Mortar Using Flow-Table Tests
- Yuan Qiang, Zuo Shenghao, Li Zemin, Shi Caijun et al. (2021-11)
Optimizing Three-Dimensional Printing Binder Composed of Ordinary-Portland-Cement and Calcium-Sulfoaluminate-Cement with Retarders
- Sonebi Mohammed, Dedenis Marie, Abdalqader Ahmed, Perrot Arnaud (2021-11)
Effect of Red Mud, Nano-Clay, and Natural Fiber on Fresh and Rheological Properties of Three-Dimensional Concrete Printing
- Kondepudi Kala, Subramaniam Kolluru (2021-11)
Extrusion-Based Three-Dimensional Printing Performance of Alkali-Activated Binders
- Fischer Gregor, Paegle Ieva (2021-11)
Reinforcement of Three-Dimensional-Printed Concrete Structures by Weaving and Knitting of Continuous Fibers and Wires
- Zhu He, Yu Kequan, McGee Wesley, Ng Tsz et al. (2021-11)
Limestone-Calcined-Clay-Cement for Three-Dimensional Printed Engineered Cementitious Composites
- Xu Emily, Tejada Karin, Walker David, Zivkovic Sasa et al. (2021-11)
Measuring Flow- and Setting-Time for Three-Dimensionally Printed Mortar:
Case Study
- Pattaje Sooryanarayana Karthik, Hawkins Kathleen, Stynoski Peter, Lange David (2021-11)
Controlling Three-Dimensional-Printable Concrete with Vibration
- Umar Tariq (2021-08)
Key Factors Influencing the Implementation of Three-Dimensional Printing in Construction
- Babbar Atul, Rai Aryan, Sharma Ankit (2021-08)
Latest Trend in Building Construction:
Three-Dimensional Printing
- Bohuchval Marie, Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud (2020-12)
Effect of Metakaolin and Natural Fibers on Three-Dimensional Printing Mortar
- Burger Joris, Lloret-Fritschi Ena, Scotto Fabio, Demoulin Thibault et al. (2020-04)
Eggshell:
Ultra-Thin Three-Dimensional Printed Formwork for Concrete Structures
- Zahabizadeh Behzad, Pereira João, Gonçalves Claúdia, Cunha Vítor (2020-03)
Inverse Analysis of Three-Point Bending Tests for 3D Printed Fiber-Reinforced Mortars
- Yeon Jaeheum (2019-10)
Short-Term Deformability of Three-Dimensional Printable EVA-Modified Cementitious Mortars
- Geneidy Omar, Ismaeel Walaa, Abbas Ayman (2019-04)
A Critical Review for Applying Three-Dimensional Concrete Wall Printing Technology in Egypt
- Cao Xiangpeng, Li Zongjin (2019-02)
Factors Influencing the Mechanical Properties of Three-Dimensional Printed Products From Magnesium-Potassium-Phosphate Cement Material
- Li Zhijian, Wang Li, Ma Guowei (2019-02)
Method for the Enhancement of Buildability and Bending-Resistance of Three-Dimensional-Printable Tailing Mortar
- Nam Young, Hwang Young, Park Ji, Lim Yun (2019-02)
Fiber-Reinforced Cementitious Composite Design with Controlled Distribution and Orientation of Fibers Using Three-Dimensional Printing Technology
- Bao Yi, Xu Mingfeng, Soltan Daniel, Xia Tian et al. (2018-09)
Three-Dimensional Printing Multifunctional Engineered Cementitious Composites (ECC) for Structural Elements
- Nam Young, Hwang Young, Park Ji, Lim Yun (2018-02)
Feasibility Study to Control Fiber-Distribution for Enhancement of Composite Properties via Three-Dimensional Printing
- Perkins Isaac, Skitmore Martin (2015-03)
Three-Dimensional Printing in the Construction Industry:
A Review