Skip to content

#durability

Keywords by Co - Occurrence

  1. Reis Rui, Aroso Francisca, Brandão Filipe, Camões Aires et al. (2026-01)
    A Systematic Review on the Durability of 3D-Printed Cementitious Materials:
    Insights and Research Challenges
  2. Hurtig Karel, Čítek David, Holý Milan, Koteš Peter et al. (2025-12)
    Experimental Assessment of Durability in 3D Printed Cementitious Materials
  3. Xiao Wei (2025-12)
    Research on the Mechanical and Durability Properties of Carbon Fiber Reinforced 3D Printed Concrete
  4. Taborda-Llano Isabella, Hoyos-Montilla Ary, Asensio Eloy, Guerrero Ana et al. (2025-12)
    Influence of the Construction Process Parameters on the Mechanical Performance and Durability of 3D Printed Concrete:
    A Systematic Review
  5. Shilar Fatheali, Shilar Mubarakali (2025-12)
    Performance-Based Analysis of 3D Printed Geopolymers Relating Durability, Microstructure, and Life Cycle Assessment
  6. Liu Xinhao, Hu Jiajun, Xiong Guiyan, Cundy Andrew et al. (2025-12)
    Long-Term Durability and Degradation Mechanisms of 3D Printed Geopolymers (3DPG) With/Without Healing Agents in Marine Environments
  7. Sikora Paweł, Federowicz Karol, Skibicki Szymon, Techman Mateusz et al. (2025-11)
    Demonstration of 3D-Printed Concrete Containing Fine Recycled Concrete Aggregates and Recycled Concrete Powder:
    Rheology, Early-Age, Shrinkage, Mechanical, and Durability Performance.
  8. Givkashi Mohammad (2025-11)
    Durability of 3D Printed Concrete Containing Air-Entraining Agent:
    Evaluating the Importance of Carbonation Resistance
  9. Janani Parthiban, Ganesh G. (2025-11)
    Synergistic Effects of Polypropylene Fibers on the Strength and Durability Properties of 3D Printed Concrete
  10. Hasani Alireza, Dorafshan Sattar (2025-11)
    Evaluation of Fresh, Hardened, and Durability Properties of Three-Dimensional Concrete Printed Pipes
  11. Zhang Yi, Lima Lucas, Böhler David, Arunothayan Arun et al. (2025-10)
    Durability Assessment of 3D Printed Cement-Based Materials:
    A RILEM TC 304-ADC Interlaboratory Study
  12. Das Jyotish, Pratama M., Nematollahi Behzad, Guadagnini Maurizio (2025-10)
    Durability Performance of 3D-Printed Ultra-High Strength Concrete Incorporating Corrosion Inhibitor
  13. Lange David, Shen Chenyue (2025-10)
    Toward Durable 3D Printed Structures
  14. Philip Nivin, Jędrzejewska Agnieszka, Mathew Ashitta, Uthuppan Susan (2025-09)
    Steel Fiber Reinforcement for Improved Structural Performance and Durability of 3D Printed Mortar in Marine Environments
  15. Mousavi Moein, Rangaraju Prasad (2025-09)
    Freeze-Thaw Durability of 3D Printed Concrete:
    A Comprehensive Review of Mechanisms, Materials, and Testing Strategies
  16. Bradshaw James, Si Wen, Khan Mehran, McNally Ciaran (2025-07)
    Emerging Insights into the Durability of 3D-Printed Concrete:
    Recent Advances in Mix Design Parameters and Testing
  17. Kaur Zinnia, Goyal Shweta, Kwatra Naveen, Bera Tarun (2025-07)
    Pore Structure Analysis and Durability Performance of Sustainable 3D Printed Concrete Incorporating Fly Ash and Limestone Calcined Clay Based Binders
  18. Mahmoodi Obaid, Siad Hocine, Lachemi Mohamed, Şahmaran Mustafa (2025-07)
    Recent Advances in CDW-Based Geopolymers:
    A Review of Mechanical Performance, Structural Application, 3D Printing, Durability and Sustainability
  19. Popli Siddharth, Valikhah Fatemeh, Zandi Lak Erfan, Das Sreekanta (2025-07)
    Mechanical and Durability Performance of 3D-Printed Concrete with Coarse Aggregates and Cold Joints
  20. Srinivas Dodda, Panda Biranchi, Suraneni Prannoy, Sitharam Thallak (2025-06)
    Mix Design Optimization of 3D-Printed Cementitious Composites for Marine Applications:
    Impact of Binder Composition, Accelerated Carbonation, and PVA Fibers on Strength and Durability
  21. Wang Guihua, Zhou Jiguo, Liu Haoyun, Zhang Jianming (2025-05)
    Rheological Properties and Mechanical Durability of 3D-Printed Concrete Based on Low-Field NMR
  22. Das B., Prathap Y., Sandeep Ankit, Vaghamshi Keval et al. (2025-05)
    Reviewing the Materials Selection, Rheology, Durability, and Microstructural Characteristics of 3D Printed Concrete
  23. Si Qi, Zhang Wenna, Pan Zhihong, Zheng Jianqiang et al. (2025-04)
    Study on the Mechanical and Durability Properties of 3D-Printed Bamboo Fiber-Reinforced Concrete
  24. Liu Chuanbei, Zou Mengtong, Chen Xuemei, Deng Yongjun et al. (2025-04)
    Feasibility Study of 3D-Printed Rubberized Concrete as a Permanent Formwork:
    Mechanical Properties, Interlayer Interface and Durability
  25. Skripkiūnas Gintautas, Tolegenova Aigerim, Rishko Lyudmyla, Akmalaiuly Kenzhebek et al. (2025-03)
    Durability and Cracking Defects in 3D-Printed Concrete
  26. Sapata Alise, Šinka Māris, Šahmenko Genādijs, Korat Bensa Lidija et al. (2025-02)
    Establishing Benchmark Properties for 3D-Printed Concrete:
    A Study of Printability, Strength, and Durability
  27. Elango K., Saravanakumar R., Vivek D., Yuvaraj S. et al. (2025-01)
    A Critical Review of Fresh, Hardened and Durability Properties of 3D Printing Concrete
  28. Nashed Kabalan Ola, Ciblac Thierry, Marceau Sandrine, Roy Robert (2024-11)
    Advancing Raw Earth Reinforcement for 3D Printed Architecture:
    Durability-Assessment
  29. Flor Juncal Luis, Loporcaro Giuseppe, Scott Allan, Clucas Don (2024-10)
    Influence of Printing-Parameters on the Durability of 3D Printed Limestone-Calcined-Clay-Cement Mortar:
    Overlap Between Filaments and Nozzle-Offset
  30. Weger Daniel, Gartner Benjamin, Rausch Anne, Schießl-Pecka Angelika et al. (2024-09)
    Realization of a Reinforced SPI Façade:
    Direction-Dependent Material-Properties and Durability-Assessment
  31. Lima Lucas, Wangler Timothy, Sanchez Asel, Anton Ana-Maria et al. (2024-09)
    Durability of 3D Printed Concrete:
    Performance-Assessment of a Two-Component System Against Water Absorption, Carbonation, and Chloride-Ingress
  32. Mostert Jean-Pierre, Kruger Jacques (2024-09)
    Improving Durability Performance of 3D Printed Concrete via Topological Interlocking of Layers
  33. Böhler David, Mai (née Dressler) Inka, Lowke Dirk (2024-09)
    Durability of 3D Printed Concrete:
    A Comparison of Extrusion 3D Printing, Shotcrete 3D Printing and Conventional Casting
  34. Ler Kee-Hong, Ma Chau-Khun, Chin Chee-Long, Ibrahim Izni et al. (2024-08)
    Porosity and Durability Tests on 3D Printing Concrete:
    A Review
  35. Tittelboom Kim, Mohan Dhanesh, Šavija Branko, Keita Emmanuel et al. (2024-08)
    On the Micro-and Meso-Structure and Durability of 3D Printed Concrete Elements
  36. Bodur Burak, Mecit Işık Muhammet, Benli Ahmet, Bayrak Barış et al. (2024-05)
    Durability of Green Rubberized 3D Printed Lightweight Cement Composites Reinforced with Micro-Attapulgite and Micro-Steel-Fibers:
    Printability and Environmental Perspective
  37. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2024-03)
    Durability and Pore-Structure of Metakaolin-Based 3D Printed Geopolymer Concrete
  38. Vigneshwari Are, Jayaprakash Jaganathan (2024-02)
    A Review on 3D Printable Cementitious Material Containing Copper and Iron-Ore-Tailings:
    Material-Characterization, Activation-Methods, Engineering-Properties, Durability, and Microstructure-Behavior
  39. Zhou Longfei, Gou Mifeng, Ji Jiankai, Hou Xinran et al. (2024-02)
    Durability and Hardened Properties of 3D Printed Concrete Containing Bauxite-Tailings
  40. Zavaleta Diana, Ñañez Robert, Silva Guido, Ruiz Gaby et al. (2023-11)
    Additive Construction Using Enhanced Earthen-Based Composites:
    Improvement of the Mechanical Strength and Water Durability Using Chitosan and Agave-Fibers
  41. Beersaerts Glenn, Soete Jeroen, Giels Michiel, Eykens Lies et al. (2023-09)
    3D Printing of an Iron-Rich Slag-Based Hybrid Mortar:
    A Durable, Sustainable and Cost-Competitive Product?
  42. Chen Mingxu, Jin Yuan, Sun Keke, Wang Shoude et al. (2023-08)
    Study on the Durability of 3D Printed Calcium-Sulphoaluminate Cement-Based Materials Related to Rheology-Control
  43. Du Longyu, Zhou Jiehang, Lai Jianzhong, Wu Kai et al. (2023-07)
    Effect of Pore-Structure on Durability and Mechanical Performance of 3D Printed Concrete
  44. Şahin Hatice, Mardani Ali (2023-02)
    Mechanical Properties, Durability Performance and Inter-Layer Adhesion of 3DPC Mixtures:
    A State‐of‐the‐art Review
  45. Estévez Alberto, Abdallah Yomna (2022-10)
    The New Standard Is Biodigital:
    Durable and Elastic 3D Printed Biodigital Clay Bricks
  46. Inaty Francois, Baz Bilal, Aouad Georges (2022-07)
    Long-Term Durability-Assessment of 3D Printed Concrete
  47. Nodehi Mehrab, Aguayo Federico, Nodehi Shahab, Gholampour Aliakbar et al. (2022-07)
    Durability Properties of 3D Printed Concrete
  48. Sikora Paweł, Techman Mateusz, Federowicz Karol, Khayatt Ahmed et al. (2022-07)
    Insight into the Microstructural and Durability Characteristics of 3D Printed Concrete:
    Cast versus Printed Specimens
  49. Putten Jolien, Smet M., Heede Philip, Schutter Geert et al. (2022-06)
    Influence of the Print Process on the Durability of Printed Cementitious Materials
  50. Rodriguez Fabian, Lopez Cristian, Wang Yu, Olek Jan et al. (2022-06)
    Evaluation of Durability of 3D Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments
  51. Skibicki Szymon, Pułtorak Monika, Kaszyńska Maria, Hoffmann Marcin et al. (2022-04)
    The Effect of Using Recycled PET-Aggregates on Mechanical and Durability Properties of 3D Printed Mortar
  52. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-03)
    Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials:
    Correction
  53. Sun Xiaoyan, Zhou Jiawei, Wang Qun, Shi Jiangpeng et al. (2021-11)
    PVA-Fiber-Reinforced High-Strength Cementitious Composite for 3D Printing:
    Mechanical Properties and Durability
  54. Rehman Atta, Kim Jung-Hoon (2021-07)
    3D Concrete Printing:
    A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics
  55. Song Hongwei, Li Xinle (2021-05)
    An Overview on the Rheology, Mechanical Properties, Durability, 3D Printing, and Microstructural Performance of Nanomaterials in Cementitious Composites
  56. Baz Bilal, Aouad Georges, Kleib Joelle, Bulteel David et al. (2021-04)
    Durability-Assessment and Micro-Structural Analysis of 3D Printed Concrete Exposed to Sulfuric-Acid Environments
  57. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2021-02)
    Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials
  58. Weger Daniel, Gehlen Christoph (2021-01)
    Particle-Bed Binding by Selective Paste-Intrusion:
    Strength and Durability of Printed Fine-Grain Concrete Members
  59. Grassi Giulia, Lupica Spagnolo Sonia, Paoletti Ingrid (2019-05)
    Fabrication and Durability Testing of a 3D Printed Façade for Desert Climates
  60. Lafhaj Zoubeir, Dakhli Zakaria (2019-04)
    Performance Indicators of Printed Construction Materials:
    A Durability-Based Approach