Skip to content

#path

Keywords by Co - Occurrence

  1. Liao Minmao, Sun Xiao, Chen Zhaohui (2026-01)
    Simultaneous Topology and Path Optimization for 3D Concrete Printing Based on Discrete Frame Structures
  2. Kloft Harald (2025-12)
    Digital Building Fabrication – The Path Towards the Unity of Material, Process and Form:
    A Personal Reflection from Research and Practice
  3. Nakase Kota, Zhou Yubao, Hashimoto Katsufumi, Sugiyama Takafumi et al. (2025-11)
    Acoustic Emission Monitoring of Fracture Behaviour of 3D Printed Concrete with Different Printing Paths
  4. Ye Fan, Ren Xiaodan (2025-10)
    A Eulerian Circuit-Based Reinforcement Learning Path Optimization Method for 3D Concrete Printing
  5. Wang Xiaoqi, Liu Xing, Xu Yanling, Cao Jianfu et al. (2025-08)
    A General Adaptive Layer Height Continuous Path Planning Algorithm for Concrete 3D Printing of Complex Porous Structures Based on Multi-Objective Optimization and Reinforcement Learning
  6. Wang Xiaoqi, Zuo Tianyi, Xu Yanling, Liu Xing et al. (2025-06)
    Reinforcement Learning-Based Continuous Path Planning and Automated Concrete 3D Printing of Complex Hollow Components
  7. Zhang Bo, Tao Yaxin, Zhang Yi, Shields Yasmina et al. (2025-05)
    Mechanical Properties of 3D Printed Concrete with 2D Infill Patterns Including Print Path Crossings
  8. Baş Sercan, Aydın Ozan, Bundur Zeynep, Guven Gursans (2025-01)
    Building Information Modeling (BIM)-Based On-Site 3D Printer Position-Optimization and Path-Planning for Digital Fabrication
  9. Wang Bolin, Yang Min, Liu Shilong, Liu Xianda et al. (2024-10)
    Research on Mechanical Properties of a 3D Concrete Printing Component-Optimized Path by Multi-Modal Analysis
  10. Shivendra Bandoorvaragerahalli, Sharath Chandra Sathvik, Singh Atul, Kumar Rakesh et al. (2024-09)
    A Path Towards SDGs:
    Investigation of the Challenges in Adopting 3D Concrete Printing in India
  11. Chen Baixi, Zhao Xueqi, Qian Xiaoping (2024-09)
    Voxel-Based Path-Driven 3D Concrete Printing Process Simulation Framework Embedding Inter-Layer Behavior
  12. Cook Kieron, Çapunaman Özgüç, Gürsoy Benay (2024-09)
    Robotic Sand Shaping for Reusable Formworks:
    From Tool-Path Design to Emergent Shapes and Patterns in Cast Form
  13. Vasilić Ksenija (2024-09)
    Additive Manufacturing with Concrete:
    The Path to Practical Implementation
  14. Mudadu Antonio, Giulivo Marco, Menna Costantino (2024-09)
    The Effect of Printing-Path on the Shear Behavior of 3D Printed Concrete Panels Under Diagonal Compression-Test
  15. Zhou Wen, Xu Yading, Šavija Branko, McGee Wesley et al. (2024-09)
    Stitching Engineered Cementitious Composites (ECC ):
    Unraveling Anisotropy Challenges Through Architectured 3D Printing Path Design
  16. Sahu Akshay, Panda Biranchi (2024-08)
    A TSP-Based Continuous Path-Planning for Additive Manufacturing of Concrete
  17. Duarte Gonçalo, Brown Nathan, Duarte José (2024-07)
    Workflow for Generating, Simulating, and Optimizing Form and Tool-Path in 3D Concrete Printing of Vaults
  18. Nakase Kota, Hashimoto Katsufumi, Sugiyama Takafumi, Kono Katsuya (2024-06)
    Influence of Print Paths on Mechanical Properties and Fracture Propagation of 3D Printed Concrete
  19. Zhuang Zicheng, Xu Fengming, Ye Junhong, Hu Nan et al. (2024-06)
    A Comprehensive Review of Sustainable Materials and Tool-Path-Optimization in 3D Concrete Printing
  20. Thajeel Marwah, Sólyom Sándor, Balázs György (2024-05)
    Impact of Printing-Directions and Printing-Paths on the Compressive Strength of 3D Printed Concrete
  21. Jiang Xiongzhi, Li Yujia, Yang Zhe, Li Yangbo et al. (2024-02)
    Harnessing Path-Optimization to Enhance the Strength of Three-Dimensional Printed Concrete
  22. Tang Weichen, Sun Junbo, Wang Yufei, Chen Zhaohui et al. (2024-02)
    Electromagnetic Absorption Properties of 3D Printed Fiber-Oriented Composites Under Different Paths
  23. Roschli Alex, Borish Michael, Barnes Abby, Wang Peter et al. (2024-01)
    Tool-Path Considerations for Extrusion:
    Pellet, Filament, Concrete, and Thermoset
  24. Auer Daniel, Bos Freek, Olabi Mohammad, Fischer Oliver (2023-10)
    Fiber-Reinforcement of 3D Printed Concrete by Material-Extrusion-Tool-Paths Aligned to Principal Stress-Trajectories
  25. Huang Shuyi, Xu Weiguo, Hu Hanyang (2023-06)
    Space-Filling and Print-Path-Generation-Methods for Large-Area 3D Concrete Printing Pavements
  26. Yang Wenwei, Wang Li, Ma Guowei, Feng Peng (2023-06)
    An Integrated Method of Topological-Optimization and Path-Design for 3D Concrete Printing
  27. Shahzad Qamar, Li Fangyuan (2023-05)
    The Influence of Print-Path on Early-Age Plastic Bearing-Capacity and Mechanical Behavior of 3D Printed Concrete:
    A Novel Approach for Practical Applications
  28. Wan Qian, Yang Wenwei, Wang Li, Ma Guowei (2023-04)
    Global Continuous Path-Planning for 3D Concrete Printing Multi-Branched Structure
  29. Blagojevic Boris, Sawodny Oliver (2023-04)
    Path-Planning for Graded Concrete Element Fabrication
  30. Ekanayaka Virama, Hürkamp André (2023-03)
    Implementation of a Surrogate-Model for a Novel Path‐Based Finite-Element-Simulation for Additive Manufacturing-Processes in Construction
  31. Li Mingyang, Liu Zhixin, Ho Jin, Wong Teck (2023-03)
    Improving Homogeneity of 3D Printed Cementitious Material-Distribution for Radial Tool-Path
  32. Pan Zuanfeng, Si Doudou, Tao Jinghong, Xiao Jianzhuang (2023-02)
    Compressive Behavior of 3D Printed Concrete with Different Printing Paths and Concrete Ages
  33. Xia Lingwei, Bi Minghao, Wu Jie, Wang Fang et al. (2023-01)
    Integrated Lightweight Design-Method via Structural Optimization and Path-Planning for Material-Extrusion
  34. Abbaoui Khalid, Korachi Issam, Mollah Md., Spangenberg Jon (2022-11)
    CFD Modelling of Mortar-Extrusion and Path-Planning-Strategy at the Corner for 3D Concrete Printing
  35. Ma Zongfang, Wan Weipeng, Song Lin, Liu Chao et al. (2022-11)
    An Approach of Path-Optimization Algorithm for 3D Concrete Printing Based on Graph-Theory
  36. Bhooshan Shajay, Bhooshan Vishu, Megens Johannes, Casucci Tommaso et al. (2022-09)
    Print-Path Design for Inclined-Plane Robotic 3D Printing of Unreinforced Concrete
  37. Wan Qian, Wang Li, Ma Guowei (2022-07)
    Continuous and Adaptable Printing Path Based on Transfinite Mapping for 3D Concrete Printing
  38. Dörrie Robin, Kloft Harald (2022-06)
    Force-Flow Compliant Robotic Path-Planning Approach for Reinforced Concrete Elements Using SC3DP
  39. Zhang Hanghua, Xiao Jianzhuang, Duan Zhenhua, Zou Shuai et al. (2022-06)
    Effects of Printing Paths and Recycled Fines on Drying Shrinkage of 3D Printed Mortar
  40. Breseghello Luca, Naboni Roberto (2022-05)
    Tool-Path -Based Design for 3D Concrete Printing of Carbon-Efficient Architectural Structures
  41. Bi Minghao, Xia Lingwei, Tran Jonathan, Li Zhi et al. (2022-04)
    Continuous Contour-Zigzag Hybrid Tool-Path for Large-Format Additive Manufacturing
  42. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2022-04)
    A Grammar-Based Algorithm for Tool-Path-Generation:
    Compensating for Material-Deformation in the Additive Manufacturing of Concrete
  43. Nguyen-Van Sy, Gwak Kwan-Woong (2022-03)
    A Two-Nozzle Cable-Driven Parallel Robot for 3D Printing Building Construction:
    Path-Optimization and Vibration Analysis
  44. Yuan Philip, Zhan Qiang, Wu Hao, Beh Hooi et al. (2021-11)
    Real-Time Tool-Path-Planning and Extrusion-Control-Method for Variable-Width 3D Concrete Printing
  45. Lachmayer Lukas, Ekanayaka Virama, Hürkamp André, Raatz Annika (2021-11)
    Approach to an Optimized Printing Path for Additive Manufacturing in Construction Utilizing FEM Modeling
  46. Breseghello Luca, Naboni Roberto (2021-07)
    Adaptive Tool-Path:
    Enhanced Design and Process-Control for Robotic 3DCP
  47. Graser Konrad, Adel Arash, Baur Marco, Pont Daniel et al. (2021-04)
    Parallel Paths of Inquiry:
    Detailing for DFAB HOUSE
  48. Breseghello Luca, Sanin Sandro, Naboni Roberto (2021-04)
    Tool-Path Simulation, Design and Manipulation in Robotic 3D Concrete Printing
  49. Weng Yiwei, Mohamed Nisar, Lee Brian, Gan Nicole et al. (2021-02)
    Extracting BIM Information for Lattice Tool-Path-Planning in Digital Concrete Printing with Developed Dynamo Script:
    A Case Study
  50. Papacharalampopoulos Alexios, Bikas Harry, Foteinopoulos Panagis, Stavropoulos Panagiotis (2020-11)
    A Path-Planning-Optimization Framework for Concrete-Based Additive Manufacturing Processes
  51. Wan Qian, Wang Li, Ma Guowei (2020-07)
    Adaptable Tool-Path-Planning Method for 3D Concrete Printing Based on the Mapping Method
  52. Kontovourkis Odysseas, Tryfonos George, Georgiou Christos (2019-06)
    Robotic Additive Manufacturing (RAM) with Clay Using Topology-Optimization Principles for Tool-Path-Planning:
    The Example of a Building Element
  53. Ibrahim Serhat, Olbrich Alexander, Lindemann Hendrik, Gerbers Roman et al. (2018-02)
    Automated Additive Manufacturing of Concrete Structures without Formwork:
    Concept for Path-Planning
  54. Lim Sungwoo, Buswell Richard, Valentine Philip, Piker Daniel et al. (2016-06)
    Modelling Curved-Layered Printing Paths for Fabricating Large-Scale Construction Components