#mechanism
Keywords by Co - Occurrence
- Liu Xingzi, Buswell Richard, Cavalaro Sergio, Xu Jie et al. (2026-01)
Influence of Inter-Filament Voids on the Failure Mechanism and Compressive Strength of 3D Printed Concrete
- Liu Xinhao, Hu Jiajun, Xiong Guiyan, Cundy Andrew et al. (2025-12)
Long-Term Durability and Degradation Mechanisms of 3D Printed Geopolymers (3DPG) With/Without Healing Agents in Marine Environments
- Liu Huawei, Tao Yaxin, Zhu Chao, Liu Chao et al. (2025-11)
3D Printed Concrete with Recycled Coarse Aggregate:
Freeze-Thaw Resistance Assessment and Damage Mechanisms
- Zhang Hui, Wu Jie, Huang Bo-Tao, Yu Rena et al. (2025-11)
Cross-Scale Mechanisms of Anisotropy in 3D-Printed Ultra-High-Performance Concrete
- Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun et al. (2025-11)
Examining the Multi-Scale Toughening Mechanisms and Mechanical Anisotropic Behavior of 3D Printed Concrete Reinforced with Calcium Sulfate Whiskers and Mixed Fibers
- Liu Renlong, Cheng Zhangqi (2025-10)
Interlayer Fracture Properties of 3D-Printed Cement-Based Structures:
Influencing Factors and Mechanisms
- Raza Ali, Yuan Chengfang (2025-10)
Degradation Mechanisms and Microstructural Performance of 3D-Printed Engineered Cementitious Composites with Yellow River Sand Under Chloride Ion Wet-Dry Cycles
- Zhang Yi, Ren Qiang, Tittelboom Kim, Schutter Geert et al. (2025-09)
Layer Interface in 3D Printed Cement-Based Materials:
Heterogeneous Phase Distribution and New Insights into Formation Mechanism
- Wang Li, Fan Haichen, Wang Qiang, Bai Gang et al. (2025-09)
Design Method and Force Transmission Mechanism of 3D Printed Concrete Truss Beams Reinforced with 3D Conical Reinforcement
- Kim Ki-Yeol, Lim Dong-Kyu, Choi Myoungsung (2025-09)
Comparison of Pumping Mechanism for Various Cementitious Materials
- Mousavi Moein, Rangaraju Prasad (2025-09)
Freeze-Thaw Durability of 3D Printed Concrete:
A Comprehensive Review of Mechanisms, Materials, and Testing Strategies
- Wang Chaofan, Chen Bing, Wang Yong, Vo Thanh et al. (2025-08)
Influencing Mechanism of Magnesium-to-Phosphate Ratio on the Rheology and Microstructure Development of 3D-Printed Magnesium Phosphate Cement at Early Hydration
- Dong Enlai, Jia Zijian, Rao Suduan, Jia Lutao et al. (2025-08)
Fiber Alignment Mechanism in 3D-Printed Ultra-High Performance Concrete Based on Fluid Dynamics Theory
- Geng Shao-bo, Zhang Chen, Zhang Hui, Hai Lu et al. (2025-08)
Upcycling Coal Gangue Coarse Aggregates into 3D Printed Concrete:
Multi-Scale Mechanisms of Fracture Behaviour
- Bayrak Alper, Shaban Nefize, Sarıtaş Afsin, Meral Akgul Cagla (2025-07)
A Semi-Empirical Framework for Modeling Anisotropy, Spatial Variation and Failure Mechanisms in 3D Printed Concrete
- Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wong Teck et al. (2025-03)
Investigate Mechanisms of Different Printing Parameters on the Mechanical Anisotropy of 3D Concrete Printing Elements by Using Computed Tomography Scan and Computational Fluid Dynamics Methods
- Liu Xinhao, Hu Jiajun, Guo Xiaolu (2025-01)
Improved Interlayer-Bonding of 3D Printed Fiber-Reinforced Geopolymer by Healing-Agents:
Properties, Mechanism, and Environmental Impacts
- Wang Hailong, Shen Wenbin, Sun Xiaoyan, Song Xinlei et al. (2025-01)
Influences of Particle-Size on the Performance of 3D Printed Coarse Aggregate Concrete:
Experiment, Microstructure, and Mechanism Analysis
- Huang Junxiang, Peng Zeqin, Tan Xianzhong, Gong Guofang et al. (2024-12)
Mechanism Analysis of the Magnetic Field-Assisted 3D Printed Steel-Fiber-Reinforced Concrete
- Du Longyu, Zhou Jiehang, Lai Jianzhong, Yin Xuexiang et al. (2024-12)
Dynamic Damage Behavior and Anisotropic Mechanism of 3D Printed Reinforced Concrete Subjected to Penetration
- Li Ben, Li Kaihang, Lyu Xuetao, Zhao Canhao et al. (2024-12)
Microscopic Mechanism and Predicting Calculation on Mechanical Properties of Basalt-Fiber-Modified 3D Printing Cement-Based Materials
- Günzel F., Moelich Gerrit, Kanyenze Simba, Kruger Jacques et al. (2024-11)
Investigating Inherent Cement Setting Mechanisms to Improve the Constructability Performance of Extrusion-Based 3D Concrete Printing
- Lori Ali, Mehrali Mehdi (2024-11)
Mechanical Properties and Crack-Deflection Mechanisms in 3D Printed Porous Geopolymers with Cellular Structures
- Egawa Ryo, Nezu Shoichi, Nishijo Keisuke, Ohno Kazunori et al. (2024-09)
Different Sized Metal Reinforcement Insertion System Using Cartridge Replacement Mechanism for 3D Concrete Printer
- Yao Yiming, Zhang Jiawei, Sun Yuanfeng, Pi Yilin et al. (2024-08)
Mechanical Properties and Failure Mechanism of 3D Printing Ultra-High-Performance Concrete
- Yang Rijiao, Xu Chengji, Lan Yan, Qiu Yue et al. (2024-08)
Near Pixel-Level Characterisation of Micro-Fibers in 3D Printed Cementitious Composites and Migration Mechanisms Using a Novel Iterative Method
- Glotz Theresa, Petryna Yuri (2024-08)
Experimental Characterization of Anisotropic Mechanical Behavior and Failure-Mechanisms of Hardened Printed Concrete
- Wu Yiwen, Liu Chao, Liu Huawei, Bai Guoliang et al. (2024-07)
Mechanism of the Influence of Multi-Scale Pore-Structure on the Triaxial Mechanical Properties of 3D Printed Concrete with Recycled Sand
- Sun Chang, Li Jiawang, Liu Qiong, Chen Kailun et al. (2024-07)
Compressive Performance and Damage Mechanism of Concrete Short Columns Confined by Steel-Wires-Reinforced 3DPM
- Wang Changqing, Du Zicheng, Zhang Yu, Ma Zhiming (2024-06)
Elaborating the 3D Microstructural Characteristics and Strength Softening Mechanical Mechanism of Fiber-Reinforced Recycled Aggregate Concrete
- Wu Yiwen, Liu Chao, Bai Guoliang, Liu Huawei et al. (2024-05)
Effect of Time Interval on the Inter-Layer Adhesion of 3D Printed Concrete with Recycled Sand:
Multi-Factor Influencing Mechanisms and Superabsorbent Polymer Enhancement
- Wang Yibo, Ren Changzai, Yan Ming, Ao Chenyang (2024-04)
Blockage-Mechanism-Analysis and Optimization Design of 3D Concrete Print-Head
- Zhu Lingli, Zhao Wanting, Zhao Yu, Guan Xuemao (2024-03)
Mechanism Analysis of Rheological Properties of 3D Printed Steel-Slag Cementitious Composite Based on Low-Field Nuclear-Magnetic-Relaxation-Test
- Pi Yilin, Lu Cong, Li Baoshan, Zhou Junhui (2023-10)
Crack Propagation and Failure Mechanism of 3D Printing Engineered Cementitious Composites (3DP-ECC) Under Bending Loads
- Xie Xiangyu, Liu Xuemei, Ding Faxing, Zhang Lihai (2023-08)
Characteristics and Mechanism of the Particle-Migration Subject to the Shear Flow of Concrete Flow Under Pressure
- Zhang Nan, Sanjayan Jay (2023-07)
Mechanisms of Rheological Modifiers for Quick Mixing Method in 3D Concrete Printing
- Nodehi Mehrab, Omer Liam, Asiabanpour Bahram, Ozbakkaloglu Togay (2023-04)
A Novel Lightweight Mechanism for 3D Printing of Cementitious Materials
- Liu Chao, Wang Zhihui, Wu Yiwen, Liu Huawei et al. (2023-02)
3D Printing Concrete with Recycled Sand:
The Influence Mechanism of Extruded Pore-Defects on Constitutive Relationship
- Li Chao, Zahedi Ata, Petzold Frank (2022-11)
Pragmatic Design Decision Support for Additive Construction Using Formal Knowledge and Its Prospects for Synergy with a Feedback Mechanism
- Lu Bing, Li Hongliang, Li Mingyang, Wong Teck et al. (2022-11)
Mechanism and Design of Fluid Catalytic Cracking Ash-Blended Cementitious Composites for High-Performance Printing
- Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom (2022-07)
Numerical Modeling of 3D Concrete Printing Wall Structure to Reliably Estimate the Failure Mechanisms
- Danish Aamar, Khurshid Kiran, Mosaberpanah Mohammad, Ozbakkaloglu Togay et al. (2022-06)
Micro-Structural Characterization, Driving Mechanisms, and Improvement-Strategies for Inter-Layer Bond Strength of Additive Manufactured Cementitious Composites:
A Review
- Huang Xin, Yang Weihao, Song Fangnian, Zou Jiuqun (2022-04)
Study on the Mechanical Properties of 3D Printing Concrete Layers and the Mechanism of Influence of Printing Parameters
- Liu Chao, Zhang Rongfei, Liu Huawei, He Chunhui et al. (2021-11)
Analysis of the Mechanical Performance and Damage Mechanism for 3D Printed Concrete Based on Pore-Structure